5
Iqbal Ali Asst Mechanical Engineer : HVAC System Cell # +92-333-9766196 E-mail : [email protected] Objective: To Embark on an enthralling and Profound world of practical work experience as an entry level engineer at your esteemed concern and ability to work in a professional atmosphere which will help me to expand knowledge regarding budding as well as hottest technologies and provides me the scope for widening the continuum of my knowledge, work stiff for the development of organization. Position Applied : Mechanical Engineer. Key Skills Mechanical: Approximate three year experience in HVAC System Designing with Execution . Load calculation, Duct Working, Ventilation System (Toilet Room, Kitchen), Pump Head Calculation System, Commissioning, Testing & Balancing, Equipment Selection & Specification,ASHRAE Psychometric, HVAC Cost Estimation for High Rise Building, School, Shopping Malls & Residential Project etc. Aware of schematic riser diagram for chilled water, Air diagram,. Layout drawing for HVAC, & Equipment schedule drawing etc... Aware of Coordinates and level drawings, Foundation, Slab, Beam, Column, Walls drawings and section. Architectural drawing, Furniture layout, Elevation and sections, Interior design, reflected ceiling drawings etc. Construction : Aware of related to Mechanical, & Finishing Works. • Aware of coordinating with various trades to expedite works and to avoid repetitive works. Inspection request etc... • Reviewing the design/shop drawing. • Ordering the Required material as per Specifications.

Iqbal Ali Mechanical Engineer CV

Embed Size (px)

Citation preview

Page 1: Iqbal Ali Mechanical Engineer CV

Iqbal AliAsst Mechanical Engineer : HVAC SystemCell # +92-333-9766196E-mail : [email protected]:

To Embark on an enthralling and Profound world of practical work experience as an entry level engineer at your esteemed concern and ability to work in a professional atmosphere which will help me to expand knowledge regarding budding as well as hottest technologies and provides me the scope for widening the continuum of my knowledge, work stiff for the development of organization.

Position Applied: Mechanical Engineer.

Key Skills

Mechanical:

Approximate three year experience in HVAC System Designing with Execution . Load calculation, Duct Working, Ventilation System (Toilet Room, Kitchen), Pump Head Calculation System, Commissioning, Testing & Balancing, Equipment Selection & Specification,ASHRAE Psychometric, HVAC Cost

Estimation for High Rise Building, School, Shopping Malls & Residential Project etc.

Aware of schematic riser diagram for chilled water, Air diagram,. Layout drawing for HVAC, & Equipment schedule drawing etc...

Aware of Coordinates and level drawings, Foundation, Slab, Beam, Column, Walls drawings and section. Architectural drawing, Furniture layout, Elevation and sections, Interior design, reflected ceiling drawings etc.

Construction :

• Aware of related to Mechanical, & Finishing Works.

• Aware of coordinating with various trades to expedite works and to avoid repetitive works.

Inspection request etc...

• Reviewing the design/shop drawing.

• Ordering the Required material as per Specifications.

• Technical Submittals.

Material Costing and Bill of Quantities

Allocating resources as per the schedule to achieve target

• Preparing weekly report and submitting to the Project manager and highlighting the Problems affecting the Progress on site.

• Attending site meeting with other trades and taking actions for the requested items for HVAC works.

• Highlighting the problems in drawing by Raising RFI.

Page 2: Iqbal Ali Mechanical Engineer CV

Iqbal Ali• Getting approvals from consultant for the executed work through inspection ticket.

Procurement :

Aware of Local/Long Lead Material.

DESIGNING:

HVAC SYSTEM Mechanical HVAC Designing Works of Commercial, Industrial & Domestic Buildings

HVAC Cooling Load Calculations by Hourly Analysis Program ( Hap 4.51& 4.80) By Carrier.

HVAC Chilled Water and Condenser Water pipe sizing and Routing.

HVAC Duct Sizing and Routing.

Evaluation of System Pressure Drop Calculation

Experience Detail

One year experience in HVAC System Designing.

Two year experience in Maintenance, Operation & commissioning department of HVAC in Bahrain (AJM Kooheji Group )

Current Employer

FND Fahaim Nanji & Desouza (Pvt.) Ltd. Consulting Engineers Karachi, Pakistan

May 2013 up to Present.

Designation : Asst: Mechanical Engineer.

Project : Dolmen City Tower, Karachi .

: Serena Hotel , Islamabad .

: French Backery, Karachi.

: ADB office, Islamabad .

: Corporate Office, Karachi .

: Khaddi Shops, Karachi .

: DPL, Karachi .

: FFBL, Islamabad.

Codes & Standards Familiarity:

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc, ASHRAE Hand Book

& Standards.

Professional Qualification

Bachelor of Technology (B.Tech Hons) in Mechanical, 2013 with 3.00 GPA From NICE University, Karachi.

Bachelor of Technology (B.Tech Pass) in Mechanical, 2011 with 3.20 GPA From NICE University, Karachi

Inter mediate of Science in (Pre Engineering) from PECHS of Karachi.

Cell: 0092-333-9766196 , E-Mail: [email protected]

Page 3: Iqbal Ali Mechanical Engineer CV

Iqbal Ali

Diploma of Associate Engineer, (DAE) in Textile Technology, from S.M.A Rizvi Karachi, Pakistan.

SSC With (Science) from Karachi Board.

Certifications Course

HVAC Load Calculation & Drawing Analysis by Skill Development Council.

HVAC Course by AMAN Tech (Affiliated from City & Guilds Board of London)

Computer Hard Ware

English Language

Team Building

Personal Details

Father’s Name: Akber AliDate of Birth: 03rd May1986Religion: IslamMarital Status: SingleLanguage English / UrduNationality Pakistani

NIC # 42401-2292244-1Permanent Address House No 404, Street no 25 Block D Sector 11 ½

Orangi Town Karachi Pakistan

Manager, Human Resource Department

Cell: 0092-333-9766196 , E-Mail: [email protected]

Page 4: Iqbal Ali Mechanical Engineer CV

Iqbal Ali

Dear Sir:

I'm writing to submit this letter for applying to get the opportunity for a available position in your organization. My strong technical experience at FND, AJM Kooheji Group will make me a very competitive candidate for this position.I am working as a assistant project engineer in one of the leading consulting firm in Pakistan where i have successfully designed and execute assisted many projects in the field of HVAC System of Banks, Industries, Commercial and residential buildings etc. I strive for continued excellence and provide exceptional contributions in handling different projects which differentiate me form other candidates.The attached resume further explains my education and experience and i would earnestly looking forward to your response to discuss further about how my qualifications may suit your organization.Thanks and Best Regards,

Iqbal Ali

Phone: + 92-333-9766196

Email: [email protected]

Cell: 0092-333-9766196 , E-Mail: [email protected]