Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS 13450-2-49 (2009): Medical Electrical Equipment, Part 2:Particular Requirements for the Safety, Section 49:Multifunction Patient Monitoring Equipment [MHD 14:Hospital Planning]
IS 13450 (Part 2/Sec 49) : 2009
IEC 60601-2-49 : 2001
Hkkjrh; ekud
fpfdRlh; fo|qr miLdjHkkx 22222 lqj{kk ds fy, fof'k"V vis{kk,¡
vuqHkkx 4949494949 cgqizdk;fRed ejht fujh{k.k miLdj
Indian Standard
MEDICAL ELECTRICAL EQUIPMENT
PART 2 PARTICULAR REQUIREMENTS FOR THE SAFETY
Section 49 Multifunction Patient Monitoring Equipment
ICS 11.040.55
© BIS 2009
B U R E A U O F I N D I A N S T A N D A R D SMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002
October 2009 Price Group 13
Electromedical Equipment Sectional Committee, MHR 15
NATIONAL FOREWORD
This Indian Standard (Part 2/Sec 49) which is identical with IEC 60601-2-49 : 2001 ‘Medical electricalequipment — Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment’issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standardson the recommendation of the Electromedical Equipment Sectional Committee and approval of the MedicalEquipment and Hospital Planning Division Council.
This Particular Standard concerns the safety of multifunction patient monitoring equipment. It supplementsthe General Standard IS 13450 (Part 1) : 2008 ‘Medical electrical equipment: Part 1 General requirements forthe basic safety and essential performance (first revision)’. The requirements of this Particular Standard takepriority over those of the General Standard.
A general guidance for the requirements of this Particular Standard is included in Annex AA. It is consideredthat knowledge of the reasons for these requirements will not only facilitate the proper application of thestandard but will, in due course, expedite any revision necessitated by the changes in clinical practice or asa result of developments in technology. However, this annex does not form part of the requirements of thisstandard.
The text of IEC Standard has been approved as suitable for publication as an Indian Standard withoutdeviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention isparticularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as‘Indian Standard’.
b) Comma (,) has been used as a decimal marker in the International Standard while in Indian Standards,the current practice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to certain International Standards for which Indian Standardsalso exist. The corresponding Indian Standards which are to be substituted in their places are listed belowalong with their degree of equivalence for the editions indicated:
(Continued on third cover)
International Standard
IEC 60601-1 : 19881) Medical electricalequipment — Par t 1: Generalrequirements for safety
IEC 60529 : 1989 Degrees of protectionprovided by enclosures (IP code)
IEC 60601-1-4 : 19962) Medicalelectrical equipment — Part 1: Generalrequirements for safety — Section 4:Collateral standard : Programmableelectrical medical systems
Corresponding Indian Standard
IS 13450 (Part 1) : 2008 Medicalelectrical equipment: Part 1 Generalrequirements for the basic safety andessential performance (first revision)
IS 12063 : 1987 Classification ofdegrees of protection provided byenclosures of electrical equipment
IS 13450 (Part 1/Sec 4) : 2009 Medicalelectrical equipment: Part 1 Generalrequirements for safety, Section 4Collateral standard: Programmableelectrical medical systems
Degree of Equivalence
Technically Equivalent
do
do
1)Since revised in 2005.2)Since revised in 2000.
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
1
Indian Standard
MEDICAL ELECTRICAL EQUIPMENTPART 2 PARTICULAR REQUIREMENTS FOR THE SAFETY
Section 49 Multifunction Patient Monitoring Equipment
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
2
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
3
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
4
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
5
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
6
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
7
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
8
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
9
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
10
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
11
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
12
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
13
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
14
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
15
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
16
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
17
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
18
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
19
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
20
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
21
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
22
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
23
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
24
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
25
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
26
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
27
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
28
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
29
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
30
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
31
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
32
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
33
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
34
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
35
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
36
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
37
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
38
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
39
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
40
NATIONAL ANNEX A(National Foreword)
A-1 BIS CERTIFICATION MARKINGThe product may also be marked with the Standard Mark.
A-1.1 The use of the Standard Mark is governed by the provisions of the Bureau of Indian Standards Act,1986 and the Rules and Regulations made thereunder. The details of conditions under which the licence forthe use of Standard Mark may be granted to manufacturers or producers may be obtained from the Bureauof Indian Standards.
IS 13450 (Part 2/Sec 49) : 2009IEC 60601-2-49 : 2001
41
(Continued from second cover)
The technical committee responsible for the preparation of this standard has reviewed the provisions of thefollowing International Standards referred in this adopted standard and has decided that they are acceptablefor use in conjunction with this standard:
International Standard Title
IEC/TR3 60513 : 1994 Fundamental aspects of safety standards for medical electrical equipment
IEC 60601-1-2 : 19931) Medical electrical equipment — Part 1: General requirements for safety —Section 2: Collateral standard: Electromagnetic compatibility — Requirementsand tests
The standard also makes a reference to the BIS Certification Marking of the product, details of which isgiven in National Annex A.
For the purpose of deciding whether a particular requirement of this standard is complied with, the finalvalue, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordancewith IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retainedin the rounded off value should be the same as that of the specified value in this standard.
1)Since revised in 2007.
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of Indian Standards Act, 1986 to promote
harmonious development of the activities of standardization, marking and quality certification of
goods and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of the these publications may be reproduced in
any form without the prior permission in writing of BIS. This does not preclude the free use, in the
course of implementing the standard, of necessary details, such as symbols and sizes, type or grade
designations. Enquiries relating to copyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are
also reviewed periodically; a standard alongwith amendments is reaffirmed when such review indicates
that no changes are needed; if the review indicates that changes are needed, it is taken up for revision.
Users of Indian Standards should ascertain that they are in possession of the latest amendments or
edition by referring to the latest issue of ‘BIS Catalogue’ and ‘Standards: Monthly Additions’.
This Indian Standard has been developed from Doc No.: MHR 15 (0072).
Amendments Issued Since Publication
Amend No. Date of Issue Text Affected
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002
Telephones: 2323 0131, 2323 3375, 2323 9402 Website: www.bis.org.in
Regional Offices: Telephones
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg 2323 7617
NEW DELHI 110002 2323 3841
Eastern : 1/14 C.I.T. Scheme VII M, V.I.P. Road, Kankurgachi 2337 8499, 2337 8561
KOLKATA 700054 2337 8626, 2337 9120
Northern : SCO 335-336, Sector 34-A, CHANDIGARH 160022 260 3843
260 9285
Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 2254 1216, 2254 1442
2254 2519, 2254 2315
Western : Manakalaya, E9 MIDC, Marol, Andheri (East) 2832 9295, 2832 7858
MUMBAI 400093 2832 7891, 2832 7892
Branches : AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. DEHRADUN.
FARIDABAD. GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. KANPUR. LUCKNOW.
NAGPUR. PARWANOO. PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM.
VISAKHAPATNAM.
Published by BIS, New Delhi