BUILTUP SECTIONS PROPERTIESMEMBER PROPERTIES

Wt in Kg/mt Area D bf tf tw Ixx Iyy

ISHB 200 37.3 47.54 20.00 20.00 0.90 0.61 3608.40 967.10

PLATE DETAILS BUILTUP SECTION DETAILS

b t A= Spacing between members

30.00 1.00 30.00 22.5

COMBINED PROPERTIES USING PLATES

Wt in Kg/mt Area D bf tf tw Ixx Iyy

with plate 84.4 107.54 22.00 30.00 1.60 0.61 10228.40 5467.10

COMBINED PROPERTIES OF BUILTUP SECTION

Wt in Kg/mt Area D bf tf tw Ixx Iyy

Built Up 168.8 215.08 22.00 30.00 1.60 0.61 20456.80 38155.26

STAAD INPUT FORMATE

ISHB 200X2X300X10 9 mm107.54 22 0.61 30 1.6 10228.4 5467.1 30.38 12.2 84.12

2XISHB 200X2X300X10S225215.08 22 0.61 30 1.6 20456.8 38155.27 60.75 24.4 168.24

START USER TABLETABLE 1UNIT CM KGGENERALWIDE FLANGE

ENDUNIT METER MTON

Notes:

1. Red indicated only values to be given.

rxx ryy Zxx Zyy Izz

8.71 4.51 360.80 96.70 10.79

rxx ryy Zxx Zyy Ay Az Izz

9.75 7.13 929.85 364.47 12.20 84.12 30.37

rxx ryy Zxx Zyy Ay Az Izz

9.75 13.32 1859.71 1453.53 24.40 168.24 60.74

6 mm200 mm

200 mm

225 mm

2. All the values are in cm, cm2, cm3 and cm4.