PRODUCTCATALOGUENDT Sales & Service QUALITY INSTRUMENTs

www.johariengineering.in

We are ISNT (Indian Society for Non-destructive Testing) Life Time MemberAkhil Johari

JOHARI ENGINEERING

1213 Kailashpur

Saharanpur UP India 247001

M +917417060180,

info@johariengineering.in www.johariengineering.in

Coating Thickness Gauge JE CT 650 Johari Engg India

Ultrasonic Thickness Gauge JE TG2 Johari Engg India

MPI Yoke JEMPY27,Johari Engg India

UCI Hardness Tester ,BAQ Germany

UT Machine JEUFD7 Series Johari Engg India

UT Machine ECHOGRAPH 1095, KARL DEUTSCH Germany

Rebound Hardness Tester JEPHT1,Johari Engg India

NDT Blocks ,Johari Engg IndiaSurface Roughness Tester JESR200 ,Johari Engg India NDT UV Lamps Accessories

Rebound Hardness Tester ,Demaq USA

UT probes ,Johari Engg India

ISO 9001-2015 CERTIFIED

E: info@johariengineering.in

Ultrasonic Flaw Detector

Ultrasonic Transducers

Straight Beam Contact Transducers

Angle Beam Transducers

Dual Element (TR) Transducer

Angle Beam Dual Element (TR) Transducer

Cables and Adapters

Calibration Blocks

Ultrasonic Thickness Gauge

Portable Hardness Tester

Coating Thickness Gauge

Surface Roughness Tester

Video Scope

X-Ray Accessories

Film Drying Cabinet

Industrial LED Film Viewer

LED Screens

SS Cee vee tong

Warning Blinker with Siren

Radiation Survey Meter

MPI Instrument

MPI Chemical

Magnetic Particle Yoke

MPI Accessories

Dye Penetrants

Vibration Meter

Digital Ammeter

Digital Lux Meter

Digital Non Contact Infra Red Thermometer

JE Ultraso

nic Tran

sdu

cer

NON DESTRUCTIVE TESTINGUT Probes

Probes (also called transducers) are used for transmitting

ultrasound and receiving the reflected sound wave. Inside

the probe housing a crystal, which convert an electrical

pulse into an ultrasonic wave and later an ultrasonic wave

back into an electrical pulse. The resonance frequency

of the crystal is the testing of the crystal is the testing

frequency of probe.

For the different testing tasks different types of probe exist:

Types of Probes

Straight Beam Transducers

Angle Beam Transducers

Dual Element (TR) Transducer

Angle Beam Dual Element (TR) Transducer

Cables and Adapters

Calibration Blocks

JE

JOHARI ENGINEERING

ULTRASONIC FLAW

DETECTOR

अल्ट्रासोनिक दोष डिटेक्टर

The JOHARI ENGINEERING JE UFD7p

is the latest development in JE’s UFD range

of flaw detectors. It combines the 21th

century operating platform with the reliable

and robust hardware of JE’s well-established

JOHARI ENGINEERING portable flaw

detection instruments. It incorporates a

range of innovative features to ensure that

this new instrument is adopted as the

everyday workhorse of flaw detectors by

NDT inspectors.

जौहरी इंजीननयररगं जेई एपएप7ऩी जेई के यूएपडी शे्रणी के दोष डडटेक्टरों का नवीनतम ववकास है। यह 21 वीं सदी के ऑऩरेटटगं प्ऱेटपामम को जेई के अच्छी तरह से स्थावऩतजौहरी इंजीननयररगं ऩोटेफऱ दोष जांच उऩकरणों के ववश्वसनीय और मजफूत हाडमवेयर के साथ जोड़ती है। यह सुननश्श्चत करने के लऱए कई नई सुववधाओं को शालमऱ ककया गया है कक यह नया साधन एनडीटी ननरीऺकों द्वारा दोष डडटेक्टरों के हर रोज़ कायमऺ ेत्र के रूऩ में अऩनाया गया है

Key Features of JE UFD7p

•High resolution (800×480) 5 inch color TFT LCD

screen

•Range रेंज 2.0 – 5950 mm

•Digital gain 0.0-110.0dB (0.1dB, 1.0dB, 2.0dB,

6.0dB Step) with A+ adjustment

•Pulser voltage (Square wave mode) 25 400 V, in

steps of 25 V

•Pulser width (Square wave mode)30 … 1000 ns, in

steps of step 0.1ns, 1.0ns, 10ns, 100ns

•Pulse repetition frequency (PRF) 15 – 1000Hz

•Envelop Function/Peak Hold /Freezing Function

•DAC, TCG, AVG

•Battery Backup : 7-8Hrs

E: info@johariengineering.in

https://johariengineering.in/

ultrasonic-flaw-detectors/

Technical Specifications of JOHARI ENGINEERING JE

UFD7p

Description वववरण

JEUFD7p

Range रेंज 2.0 – 5950 mm

Display Delay/Pulse

shift/Translation

- 45 to 10000 mm

Size आकार 80 x 130 x 40 mm

Display Resolution प्रदशमन

ररज़़ॉल्यूशनHigh resolution (800x480) 5

inch wide-screen color TFT

LCD screen

Weight 1Kg with battery

Sound Velocity ध्वनन वेग 100.0~9000.0m/s continuous

Frequency Range आववृि

सीमा0.5-10Mhz, manual adjustment

mode

Rejection/Suspension (0-100) %, does not affect the

linearity and gain.

Rectification/ Detection

mode

Positive half-wave, negative half-

wave, full wave, RF signal

Independent Gates Gates A, Gate B and Gate A+B

Digital gain 0.0-110.0dB (0.1dB, 1.0dB, 2.0dB,

6.0dB Step) with A+ adjustment

Automatic Gate

Threshold

80%

Pulser voltage (Square

wave mode)

25 … 400 V, in steps of 25 V

Pulser width (Square

wave mode)

30 … 1000 ns, in steps of step

0.1ns, 1.0ns, 10ns, 100ns

Damping/ Impedance 50Ω, 100Ω, 150Ω, 400Ω

Probe Zero/Probe delay 0 – 100 μs

Pulse repetition frequency

(PRF)

15 - 1000Hz, manual adjustment

mode

Color Screen Red-Black, White -Black &

Yellow -Black

Alarm Sound Off/On/Interval

Alarm Mode Pos/Neg

Alarm Lamp Off/On/Blinking

Grid Simple/Standard/Details

Parameter Function Locked/Un Locked

Brightness Level 1-6

Probe Type Straight Probe, Angle Probe,

Surface Wave Probe

Description वववरण

JEUFD7p

Work Mode Single Crystal/ Double Crystal (TR)

Envelop Function Yes

Reading Mode Peak/ Average

Peak Hold/Freezing

Function

Yes

DAC/TCG DAC calibration tool, 16 points, according to

EN12668-1:2010,

ASME III, AWS D1.1/D1.1M JIS Z 3060:2002,

GB/T11345,

NB/T47013-2015, SY 4065-1993), JG/T203-

2007 with minimum DAC point 3 and maximum

No limit DAC Curve Type : Straight Line/Curve

DGS/AVG DGS calibration tool, according to: European

standard EN12668-1:2010 Single/Multi Point

curve DGS Curve Type : Straight Line/Curve

B-Scan Colorful B-scan (Optional ऐश्च्छक)

Video storage 30 hours (1G) (Optional ऐश्च्छक )

Memory capacity 1G CPU memory and 16G TF card can achieve

data storage and transfer (Optional )

Computer

Connectivity

HDMI/ TF Card (Optional ऐश्च्छक )

Report Software if you open WIFI function, can see the test

report from mobile phone App (Optional ऐश्च्छक)

Power lithium battery-10 hours Operation import from

Japan

Voltage : 25V - 400V continuously लऱथथयम

फैटरी -7-8 घंटे जाऩान स ेऑऩरेशन आयात वोल्टेज:

25V - 400V ऱगातारHorizontal Linearity

deviation

≤0.3%

Vertical Linearity

deviation

≤3%

Digital filters

Function

Digital filters for enhanced signal-to-noise ratio

(Optional ऐश्च्छक)

Probe connectors 2 × BNC

Operating

temperature

–10 … 55°C

WIFI Optional ऐश्च्छकThickness Gauge Optional ऐश्च्छकThough Coating

Thickness Gauge

Optional ऐश्च्छक

UT Dynamic record

playback

Optional ऐश्च्छक

©2017 Johari Engineering (JE) India | Technical content subject to change without notice

Hand-Held LED- UV Light

JE UV LED TORCH AC/DC

A Range of High

Performance,

Reliable and

Easy-to-Use

Instruments

www.johariengineering.in info@johariengineering.in

Features and benefits of Hand-Held LED- UV AC/DC Torch

•UV LED technology with long life time of the illuminant

•UV LEDs imports from Japan

•The Average service Life of the Light source – 50,000Hr

•The content of UV-B & UV-C is zero. No Risk

•Meet the requirements of ASTM standards E3022 terminology for Nondestructive Examinations

•Very uniform intensity distribution

•UV light intensity at a distance of 15”::: ≥ 2000 µw/cm²; Dia. : ≥ 80mm

•White light Emission within UV at a distance of 15” ::::: ≤ 10 lux

•Warranty :- One Year (12 Months)

जौहरी इंजीनियररंग 1213 Kailashpur Saharanpur

UP 247001,IndiaM Sales :- +917417060180info@johariengineering.inwww.johariengineering.in

We are ISNT (Indian Society for Non-destructive Testing) Life Time

Member

Specification are subject to change without prior notice

Ultraso

nic Th

ickne

ss Gau

ge

NON DESTRUCTIVE TESTING EQUIPMENT

JETG Series Ultrasonic Thickness Gauge will be the best choice for accomplishing thickness

measurement. It fits many kinds of metal, such as steel, cast steel, aluminum, plastic, glass fiber

and any other good conductors of ultrasonic.

JETG2 JETG4 JETG4D

Working principle Ultrasound (ultrasonic

pulse echo / echo)

Ultrasound (ultrasonic

pulse echo / echo)

Ultrasound (ultrasonic pulse

echo / echo)

Measuring Range: 0.75~300mm 0.75~400mm 0.75~400mm

Velocity 1000~9999m/s，Preset

5 commonly used

material velocity

1000~9999m/s，Preset 5 commonly

used material velocity

1000~9999m/s，Preset 5

commonly used material

velocity

Unit mm/inch mm/inch mm/inch

USB Storage No Connection USB Connection USB

Storage Data set 500 Sets 500 Sets 1000 Sets

Penetrate the coating No N0 Yes,( E-E mode): Coat

thickness: Less than 2mm

Thickness range under coat:

2-25mm

Power Source Battery 1.5V AAA x 3 1.5V AAA x 4 1.5V AAA x 4

Specification are subject to change without prior notice

Po

rtable

Hard

ne

ss Teste

r & C

oatin

g Thickn

ess G

auge

NON DESTRUCTIVE TESTING EQUIPMENT Johari Engineering JE PHT Quick hardness testing made easy The new generation of rebound hardness testers.

Measuring range :- HLD (170-960)，HRC (17.9-69.5),HB (19-683)，HV (80-1042)HS (30.6-102.6)HRA(59.1-

88)，HRB (13.5-101.7) HL

Test method :- Rebound hardness testing

Accuracy :- ±0.5% @ HL=800, Repeatability Accuracy：HLD：±6 HRC：±1 HB：±4

Display :- Screen Display：128X64 dot matrix LCD, backlight and adjustable contrast

Impact device :- Probe D / DC / DL / C / D+15

Impact direction :- Universal angle (UA) type 360°（down, inclined down, level, inclined up and up）Memory :- 100 data can be saved and re-readable

Printer :- Inbuilt

Measures coating Thickness on both Ferrous and Non Ferrous materials

with interface cable & S/W

The JECT coating thickness gauges work either on the magnetic induction or

on the eddy current principle, depending on the type of probe used

You can select the type of probe via MENU system or it will work

automatically.

Operating with MENU Easily.

Zero Calibrating Easily.

Low Battery , error indication.

USB Interface for PC analysis software.

Disable Auto Power Off function via MENU setting

Measuring Ranges

Ferrous 0 ~ 1250um

0 ~ 49.21mils

Non Ferrous 0 ~ 1250um

0 ~ 49.21mils

Tolerance

Ferrous ±3% ±1um

±3% ± 0.039 mils

Non Ferrous ±3% ±1.5um

±3% ± 0.059mils

Ferrous 0.1um / 0.001 mils

Non Ferrous 0.1um / 0.001 mils

Minimum Curvature radius

Ferrous : 1.5mm / Non-Ferrous : 3mm

Diameter of Minimum Area

Ferrous :7 mm / Non ferrous : 5 mm

Basic critical thickness

Ferrous : 0.5mm / Non Ferrous : 0.3mm

Johari Engineering JE CT

Coating Thickness Gauge

Surface

Ro

ugh

ne

ss Teste

r & V

ide

o Sco

pe

NON DESTRUCTIVE TESTING EQUIPMENT

Video scope /Bore ScopeIntroductionJF series borescope is a versatile tool for non-destructive inspection. This compact and handy device equips with 3.5” TFT LCD , 5" TFT LCD ( 800 * 480) and Large 7" TFT LCD ( 800 * 480) for instant image display. It supports video recording and photo snap function. There are various probes interchangeable for different application.

Features3.5 TFT LCD :3.5 " Extra-wide view angle and clear TFT LCD, protected by oil and scratch resistant glass.Snap shot and video recording :Snap still images(640x480) Records QVGA resolution (320x240) videos. Instant playback review. SD Card Storage (Max: 32GB)•LED brightness adjustmentHigh brightness white LED with intensity adjustment.•AV out :Support live image on TV monitor.•Zoom in and mirror :2X Digital Zoom and horizontal mirror image adjustment.•Long duty hour :Rechargeable internal Li-Polymer battery lasts for four hours.•Insert Tube optionsVGA Resolution, Function Upgrade Probes (JFVS Series) : Φ6.0mm, Φ5.5mmTwo way Articulation probes : Φ6.0mmFront or Side Camera probes : Φ3.9mm, Φ5.5mmDual-cameras Probes : Φ4.9mm• IP67• Image Sensor : CMOS Image Sensor• Certificate : CE, FCC, ROHS

The JOHARI ENGINEERING JESR 10 is the latest development in JE’s SR range of Surface Roughness. It combines the 21th century operating platform with the reliable and robust hardware of JE’s well-established JOHARI ENGINEERING portable Surface Roughness instruments. It incorporates a range of innovative features to ensure that this new instrument is adopted as the everyday workhorse of Surface Roughness by NDT inspectors.

Technical Specifications

Testing parameters（µm）：Ra、RzStroke length（mm）：6Sample length（mm）：0.25 ，0.80 ，2.50

Evaluation length（mm）：1.25 ，4.0 ，5.0Measuring range（µm ）：Ra： 0.05 ~ 10.0 Rz： 0.1 ~ 50Error：±10%Variability：＜12%Transducer contacting pin round diameter and angle：Contacting pin round diameter：10 µm±1 µmBattery：3.7V LiSize：106 mm×70 mm×24 mmWeight：200gSensor needle static force and its rate of change：Stylus static force： ≤ 0.016NForce measuring rate of change： ≤ 800N/m

Surface Roughness Tester

X-R

ay Acce

ssorie

sNON DESTRUCTIVE TESTING EQUIPMENT

X-Ray Accessories

JE Film Drying Cabinet

Fitted with Blower (forced air drying)Heaters and thermostat to control the temperature inside the cabinet.Films of maximum size upto 35 X 43 cms can accommodated with or without hangersCapacity : For 25 Films Capacity : For 50 FilmsFitted with double doorThermostat to control the temperature inside the cabinet at a preset valueSeparate switches for Mains heaters and fans are provided.Standard Fittings : Heaters, Heavy duty Fan , Thermometer to indicate cabinet temperatureHanger Rack for 25/50 films. Power Supply : 230VAC / 240 VAC +/- 8%, 50/60 Hz Single Phase

•LED Screens -0.05MM,010MM,0.15MM,0.02MM•SS Cee vee tong ---2 Mtr. in SS•Warning Blinker with Siren•Radiation Survey Meter (X-Rays and Gamma Rays)•Industrial LED Film Viewer•Yellow Chalk

Manufacture & Marketed By

JOHARI ENGINEERING

1213 Kailashpur Saharanpur

UP 247001

M +917417060180, info@johariengineering.in

MP

I Instru

me

nt &

Ch

emicals

NON DESTRUCTIVE TESTING EQUIPMENT Magnetic Particle Inspection

Manufacture & Marketed By

JOHARI ENGINEERING

1213 Kailashpur Saharanpur

UP 247001

M +917417060180, info@johariengineering.in

Magnetic Particle Yoke

MPI Chemicals & ACCESSORIES

ELECTRONICS EQUIPMENTS

Digital Ammeter

This multifunction anemometer provides instant data such as Air Speed and Temperature in Dual Level LCD display with Backlight

Digital Non Contact Infra Red Thermometer

AIR VELOCITY Range Resolution

Threshold

Accuracy

m/s (me per sec)

0 ~ 45 m/s 0.1 m/s 0.3 m/s ±3% ± 0.1 dgts

ft/min 0 ~ 8800 ft/min

19 ft/min60 ft/min

±3% ± 10 dgts

Km/h 0 ~ 140 km/h 0.3 km/h 1 km/h ±3% ± 0.1 dgtsmph (m per h) 0 ~ 100 mph 0.2 mph 0.7 mph ±3% ± 0.1 dgtsAIR Temp 32 ~ 113°F 0.36 ±3.6°F

0 ~ 45°C 0.2 ±2°C

Vibration Meter

Digital Non Contact Infra Red Thermometer

CERTIFICATES

Some of Our Customers

Manufacture & Marketed By

JOHARI ENGINEERING

1213 Kailashpur Saharanpur

UP 247001,India

M +917417060180, info@johariengineering.in

www.johariengineering.in