Standards published

New International Standards published between 01 July and 31 July 2016

* Available in English only

** French version of standard previously published in English only

Price grou

p

IIW International Institute of Welding

ISO 18211:2016 * Non-destructive testing — Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation

C

TC 8 Ships and marine technology

ISO 16706:2016 * Ships and marine technology — Marine evacuation systems — Load calculations and testing

B

ISO 15540:2016 * Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic com-pensators — Test methods

A

ISO 15541:2016 * Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic com-pensators — Requirements for the test bench

B

TC 17 Steel

ISO 683-3:2016 * Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels

E

ISO 683-4:2016 * Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels

D

ISO 3575:2016 * Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities

C

TC 20 Aircraft and space vehicles

ISO 8056-2:1988/Amd 1:2016

* Aircraft — Nickel-chromium and nickel-aluminium thermocouple extension cables — Part 2: Terminations — General requirements and tests — Amendment 1

XZ

ISO 4118:2016 * Air cargo — Non-certified lower deck containers — Design and testing

F

ISO 10254:2016 * Air cargo and ground equipment — Vocabulary

A

ISO 21076:2016 * Space data and information transfer systems — Space communications cross support — Architecture requirements document

H

ISO 21077:2016 * Space data and information transfer systems — Digital motion imagery

E

ISO 21080:2016 * Space data and information transfer systems — Licklider transmission protocol (LTP) for CCSDS

G

ISO 21082:2016 * Mission operations — MAL space packet transport binding and binary encoding

G

ISO 27852:2016 * Space systems — Estimation of orbit lifetime

F

TC 21 Equipment for fire protection and fire fighting

ISO 7076-4:2016 * Fire protection — Foam fire extinguishing systems — Part 4: High expansion foam equipment

B

TC 22 Road vehicles

ISO 7637-3:2016 * Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

D

ISO/PAS 19451-1:2016 * Application of ISO 26262:2011-2012 to semiconductors — Part 1: Application of concepts

H

ISO/PAS 19451-2:2016 * Application of ISO 26262:2011-2012 to semiconductors — Part 2: Application of hardware qualification

B

TC 23 Tractors and machinery for agriculture and forestry

ISO 4254-13:2012

Agricultural machinery — Safety — Part 13: Large rotary mowers

F

ISO 11450:1999

Equipment for harvesting and conservation — Round balers — Terminology and commercial specifica-tions

B

ISO 11450:1999/Amd 1:2016

Equipment for harvesting and conservation — Round balers — Terminology and commercial specifica-tions — Amendment 1

XZ

TC 24 Particle characterization including sieving

ISO 3310-1:2016 * Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth

C

TC 29 Small tools

ISO/TS 13399-70:2016 * Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout

F

ISO/TS 13399-71:2016 * Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of docu-ments for standardized data exchange: Graphical product information

B

ISO/TS 13399-72:2016 * Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange

D

ISO 240:2016

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels

A

ISO 1641-1:2016

End mills and slot drills — Part 1: Milling cutters with cylindrical shanks

A

ISO 3293:2016

Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive

A

ISO 3294:2016

Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

A

TC 34 Food products

ISO 11702:2016

Animal and vegetable fats and oils — Enzymatic determination of total sterols content

B

ISO 18862:2016 * Coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization

D

TC 35 Paints and varnishes

ISO 1514:2016

Paints and varnishes — Standard panels for testing

B

ISO 3248:2016

Paints and varnishes — Determination of the effect of heat

A

ISO 4623-2:2016

Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates

B

TC 37 Terminology and other language and content resources

ISO 24624:2016 * Language resource management — Transcription of spoken language

E

TC 43 Acoustics

ISO 389-7:2005/Amd 1:2016

Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field lis-tening conditions

XZ

ISO/PAS 20065:2016

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

E

TC 44 Welding and allied processes

ISO 5182:2016

Resistance welding — Materials for electrodes and ancillary equipment

B

TC 45 Rubber and rubber products

ISO 9924-1:2016 * Rubber and rubber products — Determination of the composition of vulcanizates and uncured com-pounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobu-tene-isoprene, isoprene and styrene-butadiene rubbers

B

ISO 9924-2:2016 * Rubber and rubber products — Determination of the composition of vulcanizates and uncured com-pounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers

B

ISO 19246:2016

Rubber compounding ingredients — Silica — Oil absorption of precipitated silica

C

TC 59 Buildings and civil engineering works

ISO 11528:2016 * Buildings and civil engineering works — Sealants — Determination of crazing and cracking following ex-posure to artificial or natural weathering

C

TC 61 Plastics

ISO 14853:2016 * Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

E

ISO 25137-1:2009

Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 25137-2:2009

Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

A

ISO 4590:2016

Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells

D

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 19901-4:2016 * Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotech-nical and foundation design considerations

H

TC 69 Applications of statistical methods

ISO/TR 16705:2016 * Statistical methods for implementation of Six Sigma — Selected illustrations of contingency table analysis

E

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/TS 16774-2:2016 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance

B

ISO/TS 16774-3:2016 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance

B

ISO/TS 16774-4:2016 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface

B

TC 81 Common names for pesticides and other agrochemicals

ISO 765:2016 * Pesticides considered not to require common names

H

TC 84 Devices for administration of medicinal products and catheters

ISO 11608-7:2016

Needle-based injection systems for medical use — Requirements and test methods — Part 7: Accessibil-ity for persons with visual impairment

D

TC 92 Fire safety

ISO/TR 13571-2:2016 * Life-threatening components of fire — Part 2: Methodology and examples of tenability assessment

H

ISO 24678-6:2016 * Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phe-nomena

D

TC 94 Personal safety -- Protective clothing and equipment

ISO 11999-6:2016 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 6: Footwear

E

TC 96 Cranes

ISO 11031:2016

Cranes — Principles for seismically resistant design

F

TC 104 Freight containers

ISO 1161:2016

Series 1 freight containers — Corner and intermediate fittings — Specifications

D

TC 106 Dentistry

ISO 17254:2016

Dentistry — Coiled springs for use in orthodontics

A

ISO 13078-2:2016 * Dentistry — Dental furnace — Part 2: Test method for evaluation of furnace programme via firing glaze

B

ISO/TS 22911:2016

Dentistry — Preclinical evaluation of dental implant systems — Animal test methods

B

TC 108 Mechanical vibration, shock and condition monitoring

ISO 20283-3:2006/Amd 1:2016

Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measure-ment of shipboard equipment — Amendment 1

XZ

ISO 16063-1:1998/Amd 1:2016

* Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 1

XZ

ISO 16063-43:2015 * Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification

D

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 18740:2016

Turbocompressors — Performance test code — Simplified acceptance test

B

TC 119 Powder metallurgy

ISO 4499-4:2016

Hardmetals — Metallographic determination of microstructure — Part 4: Characterisation of porosity, carbon defects and eta-phase content

B

TC 122 Packaging

ISO 17451-1:2016 * Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 1: Numeric codification of inventories

F

ISO 13355:2016

Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test

B

TC 127 Earth-moving machinery

ISO/TR 19948:2016 * Earth-moving machinery — Conformity assessment and certification process

A

TC 131 Fluid power systems

ISO 18582-1:2016

Fluid power — Specification of reference dictionary — Part 1: General overview on organization and structure

B

ISO 16656:2016 * Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions

A

ISO 7368:2016

Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities

F

ISO 3601-2:2016

Fluid power systems — O-rings — Part 2: Housing dimensions for general applications

G

TC 133 Clothing sizing systems - size designation, size measurement methods and digital fit-tings

ISO 18825-1:2016

Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the virtual human body

C

ISO 18825-2:2016 * Clothing — Digital fittings — Part 2: Vocabulary and terminology used for attributes of the virtual human body

F

TC 134 Fertilizers and soil conditioners

ISO 15959:2016 * Fertilizers — Determination of extracted phosphorus

B

ISO 18642:2016 * Fertilizer and soil conditioners — Fertilizer grade urea — General requirements

A

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 17885:2015/Amd 1:2016

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amend-ment 1

XZ

TC 142 Cleaning equipment for air and other gases

ISO 15858:2016

UV-C Devices — Safety information — Permissible human exposure

B

TC 147 Water quality

ISO 17294-2:2016

Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: De-termination of selected elements including uranium isotopes

E

ISO 17943:2016

Water quality — Determination of volatile organic compounds in water — Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)

F

TC 150 Implants for surgery

ISO 5832-1:2016

Implants for surgery — Metallic materials — Part 1: Wrought stainless steel

A

ISO 7198:2016

Cardiovascular implants and extracorporeal systems — Vascular prostheses — Tubular vascular grafts and vascular patches

G

TC 156 Corrosion of metals and alloys

ISO/TR 16203:2016 * Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corro-sion testing in flowing liquids

B

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23551-10:2016 * Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves

C

TC 163 Thermal performance and energy use in the built environment

ISO 12572:2016

Hygrothermal performance of building materials and products — Determination of water vapour transmis-sion properties — Cup method

E

TC 172 Optics and photonics

ISO 9022-1:2016

Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing

B

ISO 9022-23:2016 * Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambi-ent temperature and dry or damp heat

C

ISO 10110-9:2016

Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating

B

ISO 10110-11:2016

Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data

A

TC 184 Automation systems and integration

ISO 10303-242:2014/Cor 1:2016

* Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering — Technical Corrigendum 1

free

IEC 62264-5:2016 * Enterprise-control system integration — Part 5: Business to manufacturing transactions

D

TC 188 Small craft

ISO 8666:2016

Small craft — Principal data

D

TC 202 Microbeam analysis

ISO 16700:2016 * Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification

C

TC 204 Intelligent transport systems

ISO 14819-6:2006

Traffic and Traveller Information (TTI) — TTI messages via traffic message coding — Part 6: Encryption and conditional access for the Radio Data System — Traffic Message Channel ALERT C coding

D

ISO/TS 14907-2:2016 * Electronic fee collection — Test procedures for user and fixed equipment — Part 2: Conformance test for the on-board unit application interface

G

TC 205 Building environment design

ISO/TR 16822:2016 * Building environment design — List of test procedures for heating, ventilating, air-conditioning and do-mestic hot water equipment related to energy efficiency

B

TC 206 Fine ceramics

ISO 18071:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment — Test method using bacteri-ophage Q-beta

C

ISO 20808:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method

B

TC 207 Environmental management

ISO/TS 14071:2014 * Environmental management — Life cycle assessment — Critical review processes and reviewer compe-tencies: Additional requirements and guidelines to ISO 14044:2006

B

TC 210 Quality management and corresponding general aspects for medical devices

IEC 62366-1:2015/Cor 1:2016

* Medical devices — Part 1: Application of usability engineering to medical devices — Technical Corrigen-dum 1

free

ISO 80369-3:2016

Small-bore connectors for liquids and gases in healthcare applications — Part 3: Connectors for enteral applications

F

TC 215 Health informatics

ISO/IEEE 11073-20601:2016

* Health informatics — Personal health device communication — Part 20601: Application profile — Opti-mized exchange protocol

H

ISO/IEEE 11073-20601:2016/Cor 1:2016

* Health informatics — Personal health device communication — Part 20601: Application profile — Opti-mized exchange protocol — Technical Corrigendum 1

free

ISO 27799:2016

Health informatics — Information security management in health using ISO/IEC 27002

H

TC 221 Geosynthetics

ISO 9863-1:2016

Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers

A

TC 229 Nanotechnologies

ISO/TS 19006:2016 * Nanotechnologies — 5-(and 6)-Chloromethyl-2’,7’ Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line

D

TC 268 Sustainable cities and communities

ISO 37101:2016 * Sustainable development in communities — Management system for sustainable development — Re-quirements with guidance for use

E

ISO/TR 37152:2016 * Smart community infrastructures — Common framework for development and operation

D

JTC 1 Information technology

ISO/IEC 17826:2016 * Information technology — Cloud Data Management Interface (CDMI)

H

ISO/IEC TS 33072:2016 * Information technology — Process assessment — Process capability assessment model for information security management

H

ISO/IEC 10373-6:2016 * Identification cards — Test methods — Part 6: Proximity cards

H

ISO/IEC 14443-2:2016 * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface

F

ISO/IEC 1539-1:2010/Cor 4:2016

* Information technology — Programming languages — Fortran — Part 1: Base language — Technical Corrigendum 4

free

ISO/IEC 15946-1:2016 * Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 1: General

E

ISO/IEC 18370-2:2016 * Information technology — Security techniques — Blind digital signatures — Part 2: Discrete logarithm based mechanisms

G

ISO/IEC 24760-3:2016 * Information technology — Security techniques — A framework for identity management — Part 3: Prac-tice

E

ISO/IEC 29192-5:2016 * Information technology — Security techniques — Lightweight cryptography — Part 5: Hash-functions

D

ISO/IEC 13818-1:2015/Amd 2:2016

* Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 2: Carriage of layered HEVC

D

ISO/IEC 13818-1:2015/Amd 3:2016

* Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 3: Carriage of green metadata in MPEG2 systems

XZ

ISO/IEC 13818-1:2015/Amd 1:2015/Cor 1:2016

* Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 1: Delivery of timeline for external data — Technical Corrigendum 1

free

ISO/IEC 18477-2:2016 * Information technology — Scalable compression and coding of continuous-tone still images — Part 2: Coding of high dynamic range images

C

ISO/IEC 23000-15:2016 * Information technology — Multimedia application format (MPEG-A) — Part 15: Multimedia preservation application format

G

ISO/IEC 23001-9:2016 * Information technology — MPEG systems technologies — Part 9: Common encryption of MPEG-2 transport streams

B

ISO/IEC 23001-11:2015/Amd 1:2016

* Information technology — MPEG systems technologies — Part 11: Energy-efficient media consumption (green metadata) — Amendment 1: Carriage of green metadata in an HEVC SEI message

XZ

ISO/IEC 23003-3:2012/Amd 3:2016

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 3: Support of MPEG-D DRC, audio pre-roll and immediate play-out frame

XZ

ISO/IEC 23005-1:2016 * Information technology — Media context and control — Part 1: Architecture

G

ISO/IEC 23005-3:2016 * Information technology — Media context and control — Part 3: Sensory information

H

ISO/IEC 23008-3:2015/Amd 1:2016

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 1: MPEG-H, 3D audio profile and levels

XZ

ISO/IEC 29161:2016 * Information technology — Data structure — Unique identification for the Internet of Things

C

ISO/IEC 30122-1:2016 * Information technology — User interfaces — Voice commands — Part 1: Framework and general guid-ance

B

ISO/IEC 30122-4:2016 * Information technology — User interfaces — Voice commands — Part 4: Management of voice com-mand registration

B

Standards confirmed

The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 15071:2011

TC 6 Paper, board and pulps

ISO 16532-2:2007 (reconfirmed)

TC 17 Steel

ISO/TS 13899-3:2005 (reconfirmed)

TC 22 Road vehicles

ISO 10487-2:1995 (reconfirmed)

ISO 11452-11:2010

ISO 16750-4:2010

TC 29 Small tools

ISO 1174-1:2011

ISO 3315:2011

ISO 5747:1995 (reconfirmed)

ISO 15601:2000 (reconfirmed)

TC 35 Paints and varnishes

ISO 11890-1:2007 (reconfirmed)

TC 37 Terminology and other language and content resources

ISO 24610-1:2006

ISO 24614-1:2010

TC 38 Textiles

ISO 1833-21:2006 (reconfirmed)

ISO 18695:2007 (reconfirmed)

TC 39 Machine tools

ISO 3686-1:2000 (reconfirmed)

ISO 3686-2:2000 (reconfirmed)

TC 41 Pulleys and belts (including veebelts)

ISO 5284:1986 (reconfirmed)

TC 47 Chemistry

ISO 1392:1977

ISO 6228:1980

TC 61 Plastics

ISO 6238:2001 (reconfirmed)

ISO 8570:1991 (reconfirmed)

ISO 15015:2011

ISO 15106-4:2008 (reconfirmed)

ISO 19712-1:2008 (reconfirmed)

ISO 23559:2011

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 3183:2012

TC 72 Textile machinery and accessories

ISO 8229:1991 (reconfirmed)

ISO 8230-1:2008 (reconfirmed)

ISO 8230-2:2008 (reconfirmed)

ISO 8230-3:2008 (reconfirmed)

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and phar-maceutical use

ISO 11040-2:2011

TC 92 Fire safety

ISO 10294-3:1999 (reconfirmed)

ISO 22899-1:2007 (reconfirmed)

TC 94 Personal safety -- Protective clothing and equipment

ISO 10333-1:2000 (reconfirmed)

ISO 10333-2:2000 (reconfirmed)

ISO 10333-3:2000 (reconfirmed)

TC 108 Mechanical vibration, shock and condition monitoring

ISO 16063-41:2011

TC 114 Horology

ISO 14368-1:2000 (reconfirmed)

TC 120 Leather

ISO 2820:1974 (reconfirmed)

ISO 7482-3:2005 (reconfirmed)

ISO 28499-1:2009

ISO 28499-2:2009

ISO 28499-3:2009

TC 127 Earth-moving machinery

ISO 24410:2005 (reconfirmed)

TC 131 Fluid power systems

ISO 6358-1:2013

ISO 4392-2:2002 (reconfirmed)

ISO 10767-3:1999 (reconfirmed)

ISO 15086-2:2000 (reconfirmed)

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 12176-3:2011

TC 146 Air quality

ISO 10396:2007 (reconfirmed)

ISO 10397:1993 (reconfirmed)

ISO 11564:1998 (reconfirmed)

ISO 11632:1998 (reconfirmed)

ISO 21258:2010

ISO 25140:2010

TC 147 Water quality

ISO 10304-1:2007 (reconfirmed)

ISO/TS 11370:2000 (reconfirmed)

ISO 11885:2007 (reconfirmed)

ISO 8689-2:2000 (reconfirmed)

ISO 10706:2000 (reconfirmed)

ISO 10712:1995 (reconfirmed)

ISO 13829:2000 (reconfirmed)

ISO/TS 20281:2006 (reconfirmed)

TC 156 Corrosion of metals and alloys

ISO 11881:1999 (reconfirmed)

TC 168 Prosthetics and orthotics

ISO 8548-2:1993 (reconfirmed)

ISO 8548-3:1993 (reconfirmed)

TC 188 Small craft

ISO 6185-4:2011

TC 190 Soil quality

ISO/TS 10832:2009 (reconfirmed)

TC 194 Biological and clinical evaluation of medical devices

ISO 10993-17:2002 (reconfirmed)

TC 204 Intelligent transport systems

ISO 15075:2003

TC 215 Health informatics

ISO/IEEE 11073-10404:2010

ISO/IEEE 11073-10471:2010

IEC 80001-1:2010

TC 217 Cosmetics

ISO 22715:2006 (reconfirmed)

TC 221 Geosynthetics

ISO/TR 12960:1998 (reconfirmed)

TMBG Technical Management Board - groups

ISO 554:1976

ISO 558:1980

JTC 1 Information technology

ISO/IEC/IEEE 24765:2010

ISO/IEC 14772-1:1997 (reconfirmed)

Standards withdrawn

Period from 01 July to 31 July 2016

TC 2 Fasteners

ISO 4036:2012 (replaced by )

TC 5 Ferrous metal pipes and metallic fittings

ISO 15348:2002 (replaced by )

TC 8 Ships and marine technology

ISO 21:1985 (replaced by )

TC 17 Steel

ISO 1052:1982 (replaced by )

TC 20 Aircraft and space vehicles

ISO 22647:2010 (replaced by )

TC 22 Road vehicles

ISO/TS 19072-3:2012 (replaced by )

TC 23 Tractors and machinery for agriculture and forestry

ISO 5669:1982 (replaced by )

TC 34 Food products

ISO 8197:1988 (replaced by )

TC 72 Textile machinery and accessories

ISO 342:1983 (replaced by )

ISO 3914-4:1994 (replaced by )

ISO 3914-5:1994 (replaced by )

ISO 3914-6:1994 (replaced by )

ISO 5238-2:1983 (replaced by )

ISO 8115-2:1994 (replaced by )

ISO 13754:1999 (replaced by )

TC 74 Cement and lime

ISO 29582-2:2009 (replaced by )

TC 79 Light metals and their alloys

ISO 6609:1985 (replaced by )

ISO 10226:1991 (replaced by )

ISO 10277:1995 (replaced by )

TC 107 Metallic and other inorganic coatings

ISO 10546:1993 (replaced by )

TC 135 Non-destructive testing

ISO 11537:1998 (replaced by )

TC 153 Valves

ISO 12149:1999 (replaced by )

TC 155 Nickel and nickel alloys

ISO 7156:1991 (replaced by )

ISO 7528:1989 (replaced by )

TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)

ISO 14661:2000 (replaced by )

TC 219 Floor coverings

ISO 17984:2014 (replaced by )

TMBG Technical Management Board - groups

IWA 6:2008 (replaced by )

JTC 1 Information technology

ISO/IEC ISP 10611-1:2003 (replaced by )

ISO/IEC ISP 10611-2:1997 (replaced by )

ISO/IEC ISP 10611-3:2003 (replaced by )

ISO/IEC ISP 10611-4:2003 (replaced by )

ISO/IEC ISP 10611-5:2003 (replaced by )

ISO/IEC ISP 10611-6:2003 (replaced by )

ISO/IEC ISP 12062-1:2003 (replaced by )

ISO/IEC ISP 12062-2:2003 (replaced by )

ISO/IEC ISP 12062-3:2003 (replaced by )

ISO/IEC ISP 12062-4:2003 (replaced by )

ISO/IEC ISP 12062-5:2003 (replaced by )

ISO/IEC ISP 12062-6:2003 (replaced by )