Veethree Electronics and Marine LLC, 2050 47th

Terrace East, Bradenton, Florida 34203 USA

ISO 9001:2008 Tel: 1-941-538-7775 Fax: 1-941-755-1222 www.v3instruments.com

ISSUE DATE JAN-15 AT A GLANCE FEATURES � Scratch-resistant domed glass lens. � ISO symbols. � Pre-calibrated. � Easy U-clamp mounting. � White graphics on a black dial background. � Brushed stainless steel step profile bezel. � Flat glass lens with a low profile stepped bezel. � All lighting included. PAGE 1 OF 2

HEAVY DUTY RANGE OF INSTRUMENTS

The Heavy Duty line of gauges is a proven, accurate and reliable solution for a diverse range of industrial applications. The glass lenses are highly scratch resistant, providing a clear view of the fascia for the life of the gauge. White graphics on a black dial background are easy to read and white perimeter lighting can be added to provide good night visibility. Pointers are high contrast white. Standard bezels are stainless steel. The gauges are designed and manufactured to the highest standards to meet a full range of specifications, from temperature and shock to humidity and overvoltage requirements. The electrical movements are magnetically shielded to eliminate electrical interference and are CE certified. Silicone dampening minimizes pointer bounce caused by vibrations in harsh industrial environments. And, reverse polarity protection is designed into every Veethree electrical instrument.

Actual hole sizes: Nominal 2"=2.13/2.16" except Hourmeter=2.002/2.06". Nominal 3"=3.41/3.44".

Step-Profile

Veethree Electronics and Marine LLC, 2050 47th

Terrace East, Bradenton, Florida 34203 USA

ISO 9001:2008 Tel: 1-941-538-7775 Fax: 1-941-755-1222 www.v3instruments.com

HEAVY DUTY INSTRUMENTS

Ordering Information Size Dial Range Sender SS Step Bezel

Standard Flat Lens

Ammeter 2" 60-0-60 NA 80710

Hourmeter 2" 10,000 HRS NA 82760

Fuel Level 2" 2"

E-F E-F

0 – 90 OHM 240 – 33 OHM

61587 80150

Oil Pressure

2" 2"

0-80 PSI 0-100 PSI

240 – 33 OHM 240 – 33 OHM

80180 80181

Water Temperature 2" 2"

120 – 240 F 100 – 280 F

SW Match SW Match

80590 80593

Voltmeter

2" 2"

10 – 16 V 20 – 32 V

NA NA

80134 80131

Tachometer - Electrical, Diesel Alternator

3"

3.5 RPM Alternator 82302

Tachometer - Electrical, Diesel Mag. P/U

3"

3.5 RPM Mag P/U 82303

Tachometer – Electrical, Gas Engine

3"

6000 RPM

On Engine Coil

82288

Tach/Hour – Low Frequency, Programmable

3"

3.5 RPM Pulse Sensor 82430

Tach/Hour – High Frequency, Programmable

3"

3.5 RPM Pulse Sensor 82431

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature Range -40°F to +158°F (-40°C to +70°C) Humidity Remains within initial accuracy specification in 95% relative humidity at 100 °F (37.8C) for 48 hours Overvoltage Withstands a maximum of 18 volts DC Salt Spray Conforms to ASTM 117 after 48 hours of salt spray exposure Shock Withstand Remains within initial accuracy specification up to 50 G's, half sine 9-13 milliseconds durations, 25 shocks of equal magnitude on each of three axes Vibration Withstand Remains within initial accuracy specification at .060" double amplitude vibration from 10-80 10 Hz for one minute periods over two hours in each of three axes (six hours total)

PAGE 2 OF 2