Embed Size (px)
Citation preview
IT10 Frame Enclosure Version Only - 2010 Modular Turbine
Description Rack MountedDC or AC Output
Net Power Output (Based on R245fa Genetron) 10,000 Watts (10 kw)
Generator (add on) Direct Shaft Drive 1,800 - 3,600 RPM Optional DC or AC 50/60hz
Evaporator Flow - gpm (liters/min) 22 gpm @ 194 F less 25 F outlet (83 lpm @ 90C less 15 C outlet)
44 gpm @ 59 F plus 25 F outlet (166 lpm @ 15C plus 15 C outlet)
Condenser Flow - gpm (liters/min)
22 gpm @ 194 F less 25 F outlet (83 lpm @ 90C less 15 C outlet)
44 gpm @ 59 F plus 25 F outlet (166 lpm @ 15C plus 15 C outlet)
BTU Input (based on 35,000 btu/kw heat rate) 420,000 btu/hr
Frame Version Only - Dimensions (uncrated) and Weight 2 x 2 x 4 ft (400 lbs) approx.
610 mm x 610 mm x 1220 mm (181 kg)
Operating Sound (Depends on Working Fluid) 65dBA @ 10 m (33 ft)
Inlet and Outlet Pipe Sizes 2 inch (51 mm)
Application Considerations Direct Shaft Drive
Waste Heat Applications Biomass, Engine Waste Heat, Solar, Geothermal, Industrial, Boiler
Time to Manufacture (approximate) 12 weeks+
Complete ORC Package (does not include generator) $25,000
Turbine Only (for steam, refrigerant, etc.) Approx $15,000 - Market Price
12 kw 400 V DC to AC Inverter (50/60hz available in 1 or 3 Phase) Approx $6,000 - Market Price
The Infinity Turbine IT10 is experimental and designed for 80-120C input waste heat (liquid form).The Infinity Turbine IT10 is experimental and designed for 80-120C input waste heat (liquid form).
Notes and Terms:
I N F I N I T Y T U R B I N E ®2010 MODEL IT10 Organic Rankine Cycle
Infinity Turbine LLC • PO BOX 5617 MADISON WI, 53705 USA TEL 608-238-6001 FAX 240-525-2445 www.infinityturbine.com Email [email protected]
1. All prices are US Dollars, Ex-works Mfg/assembly plant. Shipping is not included.2. Complete package includes evaporator, condenser, expander, feed pump and running gear
with basic controls. Does not include DC or AC generator. Does not include input or output pumps to circulate incoming hot liquid for evaporator, or cooling liquid for condenser.
3. Units are fully tested before shipment. 4. These units are experimental, and therefore do not carry a warranty.5. Support is unlimited via email. Support does not include any proprietary information or
business development, but rather ORC machine operation.6. Screw Turbine is now included on all IT10 ORC models. Hermetically sealed, the unit has
a magnetically coupled drive on the back end with a 1 inch (25.4 mm) shaft.7. Flat Plate exchangers for the evaporator and condenser. Flat Plates are very compact, but
require filter screens at the inlets to prevent clogging.8. Direct Shaft Output Drive: Add on your own generator DC or AC.9. International crating charge is $600.10. TERMS: 50 percent down and 50 percent before shipment. Payment by wire transfer. 11. Buyer is welcome to view testing of their unit.12. Training is available at Mfg./assembly plant (fee based). On-site start-up and training is
also available (fee based).13. Since a variety of working fluids can be used, performance is not guaranteed. Units are
pressure tested working before shipment.14. Evaporator and Condenser Flows are approximate. These will vary with temperature of
liquid.15. Typical fabrication times are 12-24 weeks. This is not a guaranteed time frame or delivery date.16. Remote Monitoring: Optional.17. The manufacturer reserves the right to change or modify, without notice, the design or
equipment or operational specifications without incurring any obligation either with respect to equipment previously sold or in the process of construction.
18. Request Invoice and Wire instructions for order.19. After a order is placed with a deposit, there is a 30 percent non-refundable fee, in the case
that the buyer cancels the order.20. Revised March 23, 2010.
I N F I N I T Y T U R B I N E ®2010 MODEL IT10 Organic Rankine Cycle
Infinity Turbine LLC • PO BOX 5617 MADISON WI, 53705 USA TEL 608-238-6001 FAX 240-525-2445 www.infinityturbine.com Email [email protected]
LEFT SIDE VIEW
TOP VIEW
FRONT VIEW
3D VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DRAWNEddieCHECKED
QA
MFG
APPROVED
10/20/2009
Greg Giese / Global Energy
TITLE
IT10 New Frame and Piping
SIZE
DSCALE
DWG NO
IT10_New_Frame_and_Piping
REV
0000
SHEET 1 OF 1
UNLESS OTHERWISE NOTED:
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL !
ANGULAR: MACH ! 0.1 BEND !
TWO PLACE DECIMAL !0.01
THREE PLACE DECIMAL !0.002
INTERPRET GEOMETRICTOLERANCING PER.
MATERIAL: 6061-T6 Aluminum
FINISH: N/A
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFGLOBAL ENERGY / GREG GIESE. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFGLOBAL ENERGY / GREG GIESE IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Copyright 2009 Global Energy and Infinity Turbine LLC
60.000 in[1524.00 mm]
15.000 in[381.00 mm]
30.000 in[762.00 mm]
4.000 in[101.60 mm]
30.000 in[762.00 mm]
22.750 in[577.85 mm]
60.000 in[1524.00 mm]
24.000 in[609.60 mm]
24.000 in[609.60 mm]
8.500 in[215.90 mm]
7.750 in[196.85 mm]
2.000 in[50.80 mm]
TYP.
SQUARE TUBING SIZE
0.120 in[3.05 mm]
TYP.
BOTTOM PLATE THICKNESS
56.750 in[1441.45 mm]
LEFT SIDE VIEW
TOP VIEW
FRONT VIEW
3D VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DRAWNEddieCHECKED
QA
MFG
APPROVED
10/20/2009
Greg Giese / Global Energy
TITLE
IT10 New Frame and Piping
SIZE
DSCALE
DWG NO
IT10_New_Frame_and_Piping
REV
0000
SHEET 1 OF 1
UNLESS OTHERWISE NOTED:
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL !
ANGULAR: MACH ! 0.1 BEND !
TWO PLACE DECIMAL !0.01
THREE PLACE DECIMAL !0.002
INTERPRET GEOMETRICTOLERANCING PER.
MATERIAL: 6061-T6 Aluminum
FINISH: N/A
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFGLOBAL ENERGY / GREG GIESE. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFGLOBAL ENERGY / GREG GIESE IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Copyright 2009 Global Energy and Infinity Turbine LLC
60.000 in[1524.00 mm]
15.000 in[381.00 mm]
30.000 in[762.00 mm]
4.000 in[101.60 mm]
30.000 in[762.00 mm]
22.750 in[577.85 mm]
60.000 in[1524.00 mm]
24.000 in[609.60 mm]
24.000 in[609.60 mm]
8.500 in[215.90 mm]
7.750 in[196.85 mm]
2.000 in[50.80 mm]
TYP.
SQUARE TUBING SIZE
0.120 in[3.05 mm]
TYP.
BOTTOM PLATE THICKNESS
56.750 in[1441.45 mm]
I N F I N I T Y T U R B I N E ®2010 MODEL IT10 Organic Rankine Cycle
Infinity Turbine LLC • PO BOX 5617 MADISON WI, 53705 USA TEL 608-238-6001 FAX 240-525-2445 www.infinityturbine.com Email [email protected]
LEFT SIDE VIEW
TOP VIEW
FRONT VIEW
3D VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DRAWNEddieCHECKED
QA
MFG
APPROVED
10/20/2009
Greg Giese / Global Energy
TITLE
IT10 New Frame and Piping
SIZE
DSCALE
DWG NO
IT10_New_Frame_and_Piping
REV
0000
SHEET 1 OF 1
UNLESS OTHERWISE NOTED:
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL !
ANGULAR: MACH ! 0.1 BEND !
TWO PLACE DECIMAL !0.01
THREE PLACE DECIMAL !0.002
INTERPRET GEOMETRICTOLERANCING PER.
MATERIAL: 6061-T6 Aluminum
FINISH: N/A
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFGLOBAL ENERGY / GREG GIESE. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFGLOBAL ENERGY / GREG GIESE IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Copyright 2009 Global Energy and Infinity Turbine LLC
60.000 in[1524.00 mm]
15.000 in[381.00 mm]
30.000 in[762.00 mm]
4.000 in[101.60 mm]
30.000 in[762.00 mm]
22.750 in[577.85 mm]
60.000 in[1524.00 mm]
24.000 in[609.60 mm]
24.000 in[609.60 mm]
8.500 in[215.90 mm]
7.750 in[196.85 mm]
2.000 in[50.80 mm]
TYP.
SQUARE TUBING SIZE
0.120 in[3.05 mm]
TYP.
BOTTOM PLATE THICKNESS
56.750 in[1441.45 mm]
LEFT SIDE VIEW
TOP VIEW
FRONT VIEW
3D VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DRAWNEddieCHECKED
QA
MFG
APPROVED
10/20/2009
Greg Giese / Global Energy
TITLE
IT10 New Frame and Piping
SIZE
DSCALE
DWG NO
IT10_New_Frame_and_Piping
REV
0000
SHEET 1 OF 1
UNLESS OTHERWISE NOTED:
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL !
ANGULAR: MACH ! 0.1 BEND !
TWO PLACE DECIMAL !0.01
THREE PLACE DECIMAL !0.002
INTERPRET GEOMETRICTOLERANCING PER.
MATERIAL: 6061-T6 Aluminum
FINISH: N/A
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFGLOBAL ENERGY / GREG GIESE. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFGLOBAL ENERGY / GREG GIESE IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Copyright 2009 Global Energy and Infinity Turbine LLC
60.000 in[1524.00 mm]
15.000 in[381.00 mm]
30.000 in[762.00 mm]
4.000 in[101.60 mm]
30.000 in[762.00 mm]
22.750 in[577.85 mm]
60.000 in[1524.00 mm]
24.000 in[609.60 mm]
24.000 in[609.60 mm]
8.500 in[215.90 mm]
7.750 in[196.85 mm]
2.000 in[50.80 mm]
TYP.
SQUARE TUBING SIZE
0.120 in[3.05 mm]
TYP.
BOTTOM PLATE THICKNESS
56.750 in[1441.45 mm]
LEFT SIDE VIEW
TOP VIEW
FRONT VIEW
3D VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
DRAWNEddieCHECKED
QA
MFG
APPROVED
10/20/2009
Greg Giese / Global Energy
TITLE
IT10 New Frame and Piping
SIZE
DSCALE
DWG NO
IT10_New_Frame_and_Piping
REV
0000
SHEET 1 OF 1
UNLESS OTHERWISE NOTED:
DIMENSIONS ARE IN INCHES TOLERANCES:
FRACTIONAL !
ANGULAR: MACH ! 0.1 BEND !
TWO PLACE DECIMAL !0.01
THREE PLACE DECIMAL !0.002
INTERPRET GEOMETRICTOLERANCING PER.
MATERIAL: 6061-T6 Aluminum
FINISH: N/A
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFGLOBAL ENERGY / GREG GIESE. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFGLOBAL ENERGY / GREG GIESE IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
Copyright 2009 Global Energy and Infinity Turbine LLC
60.000 in[1524.00 mm]
15.000 in[381.00 mm]
30.000 in[762.00 mm]
4.000 in[101.60 mm]
30.000 in[762.00 mm]
22.750 in[577.85 mm]
60.000 in[1524.00 mm]
24.000 in[609.60 mm]
24.000 in[609.60 mm]
8.500 in[215.90 mm]
7.750 in[196.85 mm]
2.000 in[50.80 mm]
TYP.
SQUARE TUBING SIZE
0.120 in[3.05 mm]
TYP.
BOTTOM PLATE THICKNESS
56.750 in[1441.45 mm]
I N F I N I T Y T U R B I N E ®2010 MODEL IT10 Organic Rankine Cycle
Infinity Turbine LLC • PO BOX 5617 MADISON WI, 53705 USA TEL 608-238-6001 FAX 240-525-2445 www.infinityturbine.com Email [email protected]
I N F I N I T Y T U R B I N E ®2010 MODEL IT10 Organic Rankine Cycle
Infinity Turbine LLC • PO BOX 5617 MADISON WI, 53705 USA TEL 608-238-6001 FAX 240-525-2445 www.infinityturbine.com Email [email protected]
![TOLERANCE IN UJEMI geometri čne tolerance.afirma/pouk/1/tko/ujemi.pdf · (za čep) po SIST ISO 286 v [μm] IT tolerančna stopnja IT5 IT6 IT7 IT8 IT9 IT10 IT11 IT12 IT13 IT14 IT15](https://img.pdfslide.net/doc/110x75/5e3db121781ee316577cd2a5/tolerance-in-ujemi-geometri-ne-afirmapouk1tkoujemipdf-za-ep-po-sist.jpg)
