Upload
doankhanh
View
251
Download
7
Embed Size (px)
Citation preview
PSI Incontrol Sdn Bhd
ITEC SCADA & DMS
2
ITEC SCADA & DMS
Our world today depends on reliable and
readily available power. High investments
into the generation, transmission and
distribution systems have been made by the
utilities over the years to guarantee this
supply. It is the task of the control center
operators to make best and most efficient
use of the installed system. SCADA/DMS
is the tool that helps the operators to keep
the overview over the large networks and to
control the energy related processes
optimally.
PSI Incontrol Sdn. Bhd. is an established
and fast growing organization backed by
dedicated, qualified and richly experienced
team of engineers, technicians and skilled
workforce. We have full in-house capability
of complete engineering, implementation,
testing and commissioning of large scale
SCADA/DMS.
Our solution redefines redundancy
requirements by eliminating ‘Hot/Standby’
philosophies with every server capable of
taking over the entire functions in the
control centre.
Multiplicity of Protocols have been
integrated for the signals from the field.
IEC 870-5-101, WISP+, Harris H6000,
IEC870-5-104 are some of the protocols
implemented in the delivered SCADA/
DMS. Besides, TASE.2 protocol also
implemented for inter-control center
communication.
Our solution is based on the PSIcontrol,
the SCADA/DMS solution developed by
PSI AG, the world leading company in
Introduction
3
PSI AG develops and integrates complete
solutions, on the basis of its own software
products, for the management of energy
networks (electricity, gas, oil, heat and
water), cross -company production
management (metals, automotive,
mechanical and plant engineering, logistics)
and infrastructure management for
telecommunications, transport and safety.
PSIcontrol was developed for an extensive
productivity increase in strategic network
operation. The solution enables a small
team operator to efficiently manage very
large networks with high-density grid
infrastructures. Stability and reliability are
maintained, even with extreme influxes of
information.
The unique system technology in
PSIcontrol creates the platform for the
optimum control system as well as the
control system being accepted by network-
operation staff. The distinguishing
characteristics within the applications are
based on exceptional network capabilities
and the use of communication technology
standards.
The control system is made up of
structured levels. The bottlenecks of
conventional centrally-organized master-
slave systems are no longer an issue with
the system architecture of PSIcontrol.
PSI AG & PSIcontrol
ITEC SCADA & DMS
4
While developing PSIcontrol, our goal was
to create a reliable and complete solution
for today’s energy management needs. Our
software is separated between application-
oriented operation management features,
data management functions and advanced
system simulators.
Operations management features in
PSIcontrol work in tandem with the data
management functions. This includes
Online-Process Management and Data
Engineering.
Our data management system is responsible
for all operational aspects of a network
control system. Technical functions in
PSIcontrol have programmed data
redundancy which guarantees reliability
and gives the control system dependable
stability. Other features manage data model
changes and modeling the supply network
giving system operators more manageability.
With PSIcontrol, we offer a software
solution with unmatched data quality and
the highest level of integration capability in
the IT world. Our software has internal
structure separation to ensure that each
component functions at its best, yet the
synergy between the components allows for
the creation of a cohesive and intuitive tool.
The Main Components of PSIcontrol
ITEC SCADA & DMS
5
The operations management component in
PSIcontrol is responsible for managing
energy networks as well as programs and
data models for online monitoring.
All technological processing functions
The programs and data for human-
machine communication
The functions for linking components.
We believe that an excellent time response
of the process management functions is an
integral design feature. Even with large
information loads and simultaneous
operations across all workstations of the
system, it is crucial to have the shortest
processing and response times possible.
As network management centres grow, the
technological functions and the intuitive
human-machine communication within
PSIcontrol becomes ever increasingly
important.
The task of PSIcontrol is to condense,
visualize, and convey information to the
operator so they can quickly and intuitively
understand and react to the situation.
Rising costs are forcing energy providers to
the technical limits of the network. With
the development of smart grids and smart
metering the amount of information for
control systems to process has greatly
increased. As this trend continues, better
and more effective functionality will be
demanded. A positive effect is that with the
additional information, even better analysis
can be done by the control system. Due to
its outstanding dynamic characteristics and
the comprehensive higher-value functions,
PSIcontrol is ideally equipped for these
future tasks.
ITEC SCADA & DMS
Operations Management
6
Data management handles all specification
data for :
All technological processing functions
Primary and secondary technical
processes
Technical information linking elements
of the energy networks
Technological processing
Human-machine communication
From here, data models are generated for
the programs managing the system. A
considerable reduction in costs is achieved
while at the same time increasing the
quality of data. This is a noteworthy feature
of data management in PSIcontrol.
When possible, required data from SAP
and GIS are comprehensively imported into
the control system. For import-orientated
data management, PSIcontrol has special
program modules :
Import functions with verification of the
imported data
Programs for the largely automated
establishment of equipment graphics
Refinement of GIS graphics
Automated data and function test.
Data Management
ITEC SCADA & DMS
7
As the size of a network grows, so does the
importance of regular realistic training for
network managing personnel.
Simulators developed by PSI offer training
on any fault scenario for transmission and
distribution networks. The simulators
utilize network specification data from the
associated control system operators train
with their ‘own’ workstation.
At the core of PSIcontrol are the network
application programs with exceptionally
short and quick computation times. These
are also useful for the realistic modeling of
network protection equipment. The
simulator models the operation of
protection equipment and the location of
short circuits at random locations of the
network. The possible specification of
random primary or secondary equipment
faults shows the operation of the back up
protection in the event of a fault.
By modeling all important protective relay
types, the simulator makes it possible to
verify safety concept settings. For safety
experts this can be very effective tool.
PSI developed telecontrol solutions in-
house. With our in-house telecontrol
technology, we can use modern and
substantially more efficient technologies for
our hardware solutions.
PSI’s family of high-quality telecontrol
devices offers optimum solutions for a wide
range of equipments. With the components
of this mopdular system, efficient and cost-
effective interfaces can be configures for
standard tasks. The flexibility of this
technology also allows the implementation
of project-specific solutions.
Simulator Front End Gateway Technology
ITEC SCADA & DMS
8
The human-machine interface (HMI) allows
the operator to utilize all aspects of a
PSIcontrol network control system.
Whether a control system is accepted by the
network operators greatly depends on the
quality and operability of the human-
machine interface. In addition to our
advanced intuitive features, the PSI HMI
has an incredibly fast response time.
PSI decided in 1985 to develop the entire
HMI software in-house. This decision was
the foundation for many of our
innovations. To date, PSI has invested
more than 130 years of manpower into
creating our HMI. Our HMI technology is
one of the supporting pillars of PSIcontrol.
Only through the complete in-house
development have we been able to develop :
Visualization with technological
intelligence
Geo-referencing
Tandem workstation operation
These features opened up entirely new
control configuration possibilities of the
human-machine interface. We invite you to
attend one of our in-house demonstration
lab and see for yourself.
The complex task of network system
operators require string support from the
supervisory control and data acquisition
(SCADA) functions of the network control
system. Topology is a very important
component for operational management
functions.
Topological network colouring
Topological interlock checks
Fault analysis
Operations management uses fault analysis
to rapidly and safely re-supply healthy but
de-energized network areas. The system
determines the required network
disconnections and automatically creates a
switching sequence for resupplying the
network. In ground fault areas, the fault
analysis automatically determines the
optimum order of needed switching
sequences to find and contain a ground
fault. The necessary switching commands
can then be sent automatically.
The Human-Machine Interface
ITEC SCADA & DMS
9
PSIcontrol is equipped with extensive
network calculation programs for all supply
segments. The following essential
application areas can be specified for the
network calculations :
Evaluating the current network status
Network forecasts
Network calculations for operation and
network expansion plan
A high degree of automation, growing
network utilization, extensive energy
transports and the ever growing influence
of regenerative energies; these are the key
phrases for the current state of our
electrical networks.
This development makes demands for
reliable and significant evaluation of
network security. At the same time there
are opportunities for optimum economical
operation.
Demands and opportunities of energy
providers are both met with the effective
network calculation features of PSIcontrol.
They were designed for the varied tasks of
network control technology. PSI software
solutions offer stability you can rely on and
outstanding performance.
All calculation modules in PSIcontrol are
100% in-house developments. This is the
only way for us to be able to quickly react
to future requirements of energy providers.
Network calculation functions are place for
evaluating the current network state and
foreseen simulation calculations (e.g.
DACF process).
Network Calculations
ITEC SCADA & DMS
Available network calculation
functions in PSIcontrol :
State estimation
Load flow simulation
Short circuit analysis
Contingency analysis
Load flow optimization
Bottleneck correction
Node load adaptation
Sectioning point optimization
10
Our Customers
ITEC SCADA & DMS
Malaysia SCADA/DA System for TNB
Metro Region - Putrajaya, Selangor and Wilayah Persekutuan
SCADA/DA System for TNB Nothern, Eastern and Southern Regions
Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB MRCC
Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB NERCC
Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB SRCC
Video Wall System for Eastern Regional Control Centre (ERCC) and Backup Control Centre (BCC)
Thailand
Distribution Management System (DMS) Master System for Provincial Electricity Authority (PEA)
Distribution Management System (DMS) for Metropolitan Electricity Authority (MEA)
Iran Ardabil and Uromieh Sub-Master
Dispatching Centers for Azarbaijan Regional Electric Company (AREC)
New Control System for Khoozestan Regional Electric Company (KzREC)
Mazandaran and Golestan RDC Master Plan for Mazandaran Regional Electric Company
Rwanda
SCADA/EM System for Electrogaz, Kigali
Oman
Construction of MEDC Distribution SCADA System, Muscat Electricity Distribution Company (MEDC)
Building Partnerships Through Empowered People
ITEC SCADA & DMS
MAIN OFFICE
PSI INCONTROL SDN BHD (414225-K) (formerly known as Incontrol Tech Sdn Bhd)
No. 15, Jalan BRP 9/1D, Perusahaan Bukit Rahman Putra, 47000 Sungai Buloh, Selangor Darul Ehsan, MALAYSIA Phone : +603 6157 8050 Fax : +603 6157 8060 E-Mail : [email protected]
www.psi-incontrol.com
BRANCH OFFICES
INCONTROL TECH CO. LTD. 1000/52/53, PB Tower Building, 14th Floor, Sukhumvit 71 Road, Kwang Klongton Nua,
Wattana District 10110, Bangkok, THAILAND.
Phone : +66 2713 1956 Facsimile : +66 2713 1762
E-Mail : [email protected]
INCONTROL TECH PVT. LTD. 25, 6th Main Road,
New Colony, Chrompet Chennai 600044, INDIA.
Phone : +91 446 555 1384 E-Mail : [email protected]
PSI INCONTROL (OMAN BRANCH) North Mawaleh, Seeb,
House #9473, Way #897, Muscat, The Sultanate of OMAN.
E-Mail : [email protected]