8/10/2019 ITT PUMP

1/6

Bell & Gossett

CentrifugalPumps

B-50L

8/10/2019 ITT PUMP

2/6

Series VSX A robust, base-mounted, double-suction pump with a vertically splitcasing. Three different suction and discharge ange orientations provideidentical hydraulic performance while enhancing equipment roomlayout exibility.

Model VSX-VSC vertical suction and discharge anges createan extremely compact space-saving design that allows up to 8,000 lbs.static loading per nozzle.

Model VSX-VSCS combines a vertical discharge ange with aside suction ange while maintaining a small footprint design.

Model VSX-VSH TM provides the traditional side suction and sidedischarge anges.

VSX discharge sizes range from 4" to 18", with ows to 25,000 GPM,heads to 530' and motors to 3,000 HP. Standard features include agroutless base plate, alignment friendly coupling and an ANSI/OSHAcompliant coupling guard. Service is simplied with maintenance-freebearings and an internally ushed one-piece unitized mechanical seal.Both the bearings and mechanical seals can be replaced without removalof the rotating assembly, reducing the down time for servicing thepump. The VSX is available in bronze-tted construction with workingpressures up to 300 psig.

APPLICATIONS:

HYDRONIC HEATING AND COOLING SYSTEMS, CONDENSER WATER,

COOLING TOWERS, REFRIGERATION AND GENERAL SERVICE.

VSC

VSCS

VSH

8/10/2019 ITT PUMP

3/6

Series 60 Maintenance-free in-line pump available insizes from 1'' to 2''. Motor sizes from 1/4 to3 HP at 1750 RPM. Available in bronze-ttedand all-bronze construction. Flows to 200GPM and heads to 55 feet.

The Series 60 is a maintenance-free pumpand motor design. This design providesa worry-free, install-and-forget operation.The design incorporates the patentedXL-11 precision-crafted bearing system.

Advanced uid passage design and apermanently lubricated motor provideeffective and quiet operation. Thehydraulically balanced impeller andresilient motor also help provide smooth,quiet operation.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, DOMESTIC WATER,INDUSTRIAL AND GENERAL SERVICE.

Series 80 Close-coupled in-line mounted pumpavailable in 1-1/2'' through 8'' sizes. 1/4 to50 HP at 1750 RPM and 5 to 60 HP at 3500RPM. Available in bronze-tted and all-ironconstruction. Flows to 2500 GPM, headsto 380 feet.

The Series 80 is an efcient, heavy-duty,close-coupled pump designed for horizontaland vertical in-line mounting.

Internally ushed BUNA/Carbon ceramicseals are standard. The internal ushedseal provides ve times the ushing owof pumps designed with externally ushedseals. The Series 80 pump is available in175# and 250# working pressure andsplit-coupled designs.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, GENERAL SERVICEAND INDUSTRIAL.

Series 80 -SCA split-coupled vertical in-line pumpavailable in 1-1/2 through 10 dischargesizes. Motors range from 1 to 150 HP at1750 RPM with ows to 4000 GPM andheads to 225. Available in bronze-ttedand all-iron materials of construction,with working pressures to 250 psig.

Standard features include a unitized EPR/ Carbon-Ceramic mechanical seal, ANSI/OSHAcompliant guard, stainless steel pump shaft

and a split rigid coupling.

Designed for space savings and easyservicing, the 80-SC allows mechanical sealmaintenance without disturbing the pump,motor or piping. The wide access motorbracket will accept TC, HP, and IEC motors.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, INDUSTRIAL PROCESS, GENERALSERVICE, PRESSURE BOOSTING

Bell & Gossett Centrifugal PumpsBell & Gossetts complete line of in-line and base-mounted centrifugalpumps can handle virtually any HVAC requirement. The pumps areengineered for exceptional performance and rugged durability. They are

designed for easy maintenance and to be highly efcient. The pumpsprovide reliable operation in a variety of applications, including hydronicheating and cooling systems, industrial, refrigeration, cooling towers andirrigation. All B&G pumps are manufactured at an ISO 9001-approved facility.

The Bell & Gossett name has always stood for uncompromising qualityand dependability. Thats evident in the way every one of our centrifugalpumps is built and backed by our outstanding customer service andsupport teams. Our award-winning ESP-PLUS equipment selectionprogram helps you choose the right equipment and design uid handlingsystems accurately and effectively. ESP-PLUS is also available online at www.bellgossett.com .

8/10/2019 ITT PUMP

4/6

Series 1531 End suction, close-coupled, foot-mountedpump available in 1-1/4'' through 6'' sizes.Motor size 3/4 to 50 HP at 1750 RPM, 2 to60 HP at 3500 RPM. Available in bronze-tted,all-iron and all-bronze construction withows to 2300 GPM, heads to 400 feet.

Close-coupled, space-saving economy plusrugged construction make the Series 1531

an ideal selection for a variety of horizontal

and vertical mount applications. Availablewith the B&G standard self-ushingCarbon/Ceramic mechanical seal in175# working pressure design.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, GENERAL SERVICE, COOLINGTOWERS AND INDUSTRIAL USES.

Series 1535 Foot-mounted, end-suction, close-coupledpump available in 1'' through 1-1/2''sizes. Motor sizes 1/3 to 5 HP at 3500 RPM.Available in bronze-tted constructionwith ows to 240 GPM at 115 feet.

This back-pullout pump offers ease ofservice in a close-coupled design. The

pump can be mounted vertically or

horizontally to provide maximum exibility.Ball bearing design and standard internallyushed mechanical seal provide long,dependable service.

APPLICATIONS:COOLING TOWERS, REFRIGERATION,GENERAL SERVICE AND INDUSTRIAL.

Series 1522 Foot-mounted, close-coupled design in 3/4''through 1-1/2'' sizes. 1/4 to 1 HP at 1750RPM. Available in bronze-tted, all-bronzeand all-iron construction with ows to115 GPM at 30 feet.

The Series 1522 is a rugged yet quiet pump

due to the bronze sleeve bearing providedas standard on the pump and motor.

The exible spring coupler design betweenthe pump and motor dampens any additionalnoise and vibration.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, GENERAL SERVICE

AND INDUSTRIAL.

Series 90 Close-coupled in-line mounted pumpavailable in 1'' through 2'' sizes. 1/4 HPthrough 2 HP at 1750 RPM and 1/2 through15 HP at 3500 RPM. Available in bronze-tted and all-bronze construction withows to 200 GPM, heads to 225 feet.

The Series 90 is an excellent all-purpose

pump designed for vertical and horizontalin-line mounting. Close-coupled design;grease-lubricated motor.

Bell & Gossetts internally ushed BUNA/ Carbon ceramic seal makes the Series 90a truly worry-free pump.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS. GENERAL SERVICE,REFRIGERATION AND COOLING TOWERS

jet pump motor and Bell & Gossetts internallyushed Viton/carbon-silicon carbide sealprovide an optimum worry-free pump designto 225F. Optional EPR/carbon-silicon carbide israted to 250F. Maximum pressure is 125 psig.

APPLICATIONS:HYDRONIC HEATING AND COOLINGSYSTEMS, GENERAL SERVICE, REFRIGERAAND COOLING TOWERS.

Series 3530 The new standard in close-coupled generalservice pumps. The all new stainless steelSeries 3530 pump is available in 1", 1-1/4''and 1-1/2'' sizes. 1/2 HP through 5 HP at3500 RPM. Flows to 170 GPM and headsto 155 feet.

The Series 3530 is an excellent all-purposepump. Close-coupled 316L stainless steel wet

end, diffuser design for increased bearing andmechanical seal life, permanently greased,

8/10/2019 ITT PUMP

5/6

Suction DiffusersAn angle-pattern ow-straightening ttingthat combines a diffuser-strainer oricecylinder and full-length straightening vanesto provide ideal ow conditions for thepump suction. Sizes from 1-1/2'' to 10''in NPT, anged and grooved connections.Maximum pressure is 175 psig. Cast ironbody, steel straightening vanes and orice

cylinder are standard. SS straighteningvanes and orice cylinder are optional.A bronze start-up strainer is standard.All internal components are replaceable.

APPLICATIONS:HYDRONIC HEATING & COOLING SYSTEMS,

GENERAL SERVICE AND INDUSTRIAL

Triple-Duty ValvesA combination shut-off, center-guidednon-slam check valve and calibrated balancevalve in one device. The combination of threevalves in one minimizes cost and reducesinstallation time. Available in angle orstraight pattern in 1'' through 16'' sizes;in anged, grooved or NPT connections.The triple-duty valve has a cast iron body,

brass seat, cast bronze disc and SS stem.

A calibrated nameplate and memorybutton allow return of the valve to thebalanced position after shut-off. Thebackseating valve stem allows repackingunder full-line pressure.

APPLICATIONS:HYDRONIC HEATING & COOLING SYSTEMS,GENERAL SERVICE AND INDUSTRIAL

Series 1510 Base-mounted, end-suction Series 1510 pumpsare available in 1-1/4'' through 8'' sizes, 1/2 HPto 150 HP at 1750 RPM and 2 HP through 150HP at 3500 RPM. Bronze-tted, all-iron andbronze material congurations are availablewith ows to 4000 GPM, heads to 500 feet.

Integrally cast volute foot and center drop-outspacer coupling combine to offer true back

pullout capability, providing low-cost easeof maintenance. An ANSI-OSHA-compliantcoupling guard shields the exible coupler. Awelded steel baseplate and internally ushedmechanical seal are standard features onthis pump.

APPLICATIONS:HYDRONIC HEATING AND COOLING SYSTEMS,GENERAL SERVICE AND INDUSTRIAL.

Rolairtrol A full-ow separator to remove or eliminateentrained system air. Standard models from2" to 24." Custom units in sizes 26" andlarger. Flow rates to 17,000 GPM at 125psiand 350F. All units are ASME coded.Flanged or grooved connections on 3"and larger. The Rolairtrol is available

with a strainer as the R model, or withouta strainer as the RL model, for a lowerpressure drop.

APPLICATIONS:HYDRONIC HEATING & COOLING SYSTEMS,GENERAL SERVICE AND INDUSTRIAL

Series VTP TMMulti-stage Vertical Turbine Pumps withbronze impellers and cast iron bowls. Thelineshaft turbine pumps have above-grounddischarge with water-lubricated lineshaftbearings. The column pipe coupling hasbronze centering spiders with uted-rubberlineshaft bearings. The bowls are vitra-glass

coated in the waterways for improvedefciencies. Capacities up to 10,000 GPMwith heads to 150 feet per stage.

APPLICATIONS:COOLING TOWERS, PRESSURE BOOSTINGAND GENERAL WATER SERVICE.

8/10/2019 ITT PUMP

6/6

The "ITT Engineered Blocks" symbol and Engineered for lifeare registered trademarks of ITT Corporation. 2007

PRINTED IN U.S.A. 8-07 B -50L

ITT Corporation8200 N. Austin AvenueMorton Grove, Illinois 60053Phone: (847) 966-3700Fax: (847) 966-9052www.bellgossett.com

Use Our Software toChoose Your Hardware

Equipment Selection ProgramOur ESP-PLUS software program helps

you choose the right equipmentby giving you expert system andproduct application assistance,plus automatic calculations of

payback and annual operatingcosts, equipment schedules, submittals,

specications and more. ESP-PLUS is alsoavailable online.

For more information onBell & Gossett centrifugalpumps, contact your ITTHVAC Representative.

Pump Us for InformationBell & Gossetts comprehensive Web site makes it easier foryou to nd, specify and understand centrifugal pumps, uidhandling systems, parts, specications and applications.

Little Red Schoolhouse

ITT is known throughout the HVAC businessas the industrys educator. Our Little RedSchoolhouse, a completely equipped learningcenter, has trained more than 45,000engineers, contractors and installers in theproper design, installation and maintenanceof HVAC systems.

Bell & Gossetts full lineof centrifugal pumps areengineered for exceptional

performance, ruggeddurability and easymaintenance.

Bell & Gossett also offers a full lineof submersible wastewater pumpsfrom 1 discharge sump pumpsto 4 discharge sewage pumps.Construction materials can bethermoplastic, stainless steel orcast iron. All pumps are rated forcontinuous duty. Many featurelong life Silicon Carbide mechanicalseal faces that set our pumps apartfrom the competition.