Embed Size (px)
Citation preview
J-Loader 1580
> OPERATING WEIGHT 22,225 LBS> LIFT CAPACITY 15,000 LBS> NET HORSEPOWER 78 HP
shown with optional ejector bucket.
www.titanminingequipment.com
> Built-in serviceability - all service filters are located on the cool side of engine compartment. engine, pumps and hydraulic components are easily accessible for maintenance or repair. a hydraulic oil transfer pump is included as standard equipment to decrease the risk of contamination to the hydraulic system. routine maintenance is vital for equipment to remain productive. serviceability was a leading design requirement for the j-loader 1580.
> Strong, Robust Components - with an X-large center section and a X-strong boxed-design boom, moving components are beefed-up and over-sized on the j-loader 1580, earning it’s nickname “the beast” among machine operators.
> Heavy-Duty Loader frame - the j-loader 1580’s frame is constructed of 1” thick steel plate. all the plates have beveled weld-prep and are 100% welded. our frames are built to last, rebuild after rebuild after rebuild.
> Belt Moves & Equipment Retrieval
> Attachements and Options - a variety of attachments and options are available for the j-loader.
309 plant street | oakman, alabama 35579 | [email protected] | www.titanminingequipment.com
MACHINE OPERATING WEIGHT WITH HD 60” FORKS 22,225 LBS
ENGINE> Duetz 2011 turbo> cylinders (4)> net rated power: 78 hp> air cleaner: dual element dry type
HYDRAULICS> Dual hydrostatic pumps> Dual fixed displacement gear pumps> 4 - Function control valve operations> 18 GpM pto valve
CONTROLS> pilot-operated, joystick controls with rocker button control for auxiliary hydraulics.
HYDRAULIC OIL FILL PUMP 5 GPM
CAPACITIES> Fuel tank 33 Gal> hydraulic reservoir 37 gal
This Drawing is the sole property of Jones Machine and Welding Company Inc. Any
unauthorized reproduction is prohibited without written permission from Jones Machine.
@COPYRIGHT 1999, Jones Machine and Welding inc.
WELDING
MACHINEJONES
APPROVED BY:AND
ISSUED FOR BID:
APPROVED FOR CONSTRUCTION:INC. REVISIONDESCRIPTIONLETTER
DATE: JOB #:
APPROVED
REVISION DATE:
COMPANY NAME:
SCALE
DRAWN BY
DATE
DWG N0.J0NES MACHINE AND WELDING, INC.
OAKMAN, AL
261 3/4 in [6650 mm]
50 1/2 in [1285 mm]
20°
38°
60 in [1522 mm]
194 1/2 in [4943 mm]
45 1/2 in [1156 mm]
12 1/4 in [314 mm]
78 3/4 in [2000 mm]
30 1/4 in [768 mm]Operator Compartment
12 1/2 in [314 mm]
45 3/4 in [1160 mm]
