B3.1/1Qty Unit Rate Item Description Amount B$ADMINISTRATION AND COMMON AREA BLOCKBill No. 3PILINGCONCRETE PILES (ALL PROVISIONAL)Note:A The quantities given for piling works are approximate and payment will be made on the basis of actual quantities of work executed.B Refer to the Specification and Trade Preambles for items applicable to the piling works.C All piling works are to commence from reduced formation level.D The rates shall be deemed to include additional costs incurred in driving exploratory piles, which will be used as working piles, in order to establish the fabrication length of remaining driven piles.E Contractor is to submit sample and technical specification for approval prior to ordering of materials.F Prices for concrete piles shall include for all reinforcement.Prestressed spun concrete pilesProviding and assembling piling equipment on the site; dismantling and removing on completion12,000.00 Item G 12,000.00 for piling required in building substructure workSupplying, transporting, handling, pitching and driving prestressed spun concrete piles to an approved set (measured from cut of level to the toe of the pile after driven)137,940.00 m 4,840 H 28.50 250mm diameter (In 220 No.)Approved pointed mild steel pile shoe; fillet welding all round to end of piles as detailed on Engineer's drawing sheet no. 10053,520.00 No 220 I 16.00 to 250mm diameter pileCutting or breaking away heads of piles to required levels; cleaning and bending projecting steel reinforcement into position; removing excess lengths off site3,300.00 No 220 J 15.00 250mm diameterForming pile head as detailed on Drawing No. 1005 including bush hammering internal surface of piles, concrete filling, mild steel anchor bars, base plate and links3,300.00 No 220 K 15.00 250mm diameter with 650mm long anchor bar projectionTo CollectionJ 198160,060.00B3.1/2PILINGQty Unit Rate Item Description Amount B$CONCRETE PILES (ALL PROVISIONAL) Prestressed spun concrete piles Providing and assembling all instruments, equipment, kentledge material, etc.; test loading of piles; removing on completion6,000.30 t 90A66.67test load first single working pile to minimum two times working load as specified (working load 45 tonnes)1,999.80 t 90B22.22test load subsequent single working pile to minimum two times working load as specified (working load 45 tonnes)Submitting piling records duly signed by the Contractor and the Superintending Officer as the work proceedsItem C piling records in triplicate of all pilesTo CollectionJ 1988,000.10B3.1/3PILINGQty Unit Rate Item Description Amount B$PILING CollectionFrom Page B3.1/1 160,060.00From Page B3.1/2 8,000.10To Bill No. 3 SummaryJ 198168,060.10B3.2/1Addendum No.1Qty Unit Rate Item Description Amount B$LOWEST SLAB & FOUNDATIONSEXCAVATIONNotesA Excavating cuttings and filling to make up to finished platform levels are measured under External Works and Services.B Contrary to SMM, pipe sleeves and associated dowel bars passing through sub-structure for mechanical, electrical, plumbing and sanitary services installation are not measured separately. The contractor is deemed to have included in his rates and prices for the provision of such pipe sleeves and dowel bars in the relevant mechanical, electrical and plumbing installation works.Excavating foundation trenches311.50 m3 89 C 3.50 not exceeding 2.00m deepExcavating pits for pile caps, column or stanchion bases and the like402.50 m3 115 D 3.50 not exceeding 2.00m deepSelected excavated material consolidated in layers710.50 m3 203 E 3.50 filling to make up levelsSelected excavated material from soil heaps including all double handling535.00 m3 214 F 2.50 filling to make up levelsSURFACE TREATMENTRENTOKIL anti-termite treatment system / TERMIMESH system complete with Ultra Marine grade TMA 725 S/S mesh of 0.18mm thick highly flexible, high grade barrier fixed with termiparge two part mixture consist of liquid and dry component bonding cement / PREMESE 200 or other equal and approved anti-termite treatment to be executed by an approved/authorised firm (Contractor to fill in the anti-termite treatment system in the following space provided) _______________________________________________________________________; in accordance to manufacturer's specification and printed instructions3,000.00 Item G 3,000.00 to all soil in contact with the building structurePLAIN INSITU CONCRETE WORKConcrete Grade 15Blinding6,330.00 m2 1,055 H 6.00 50mm thickTo CollectionJ 19811,289.50B3.2/1+1Addendum No.1LOWEST SLAB & FOUNDATIONSQty Unit Rate Item Description Amount B$REINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Foundations15,042.00 m3 109 A 138.00 pile caps, column or stanchion bases and the likeTo CollectionJ 19815,042.00B3.2/2LOWEST SLAB & FOUNDATIONSQty Unit Rate Item Description Amount B$REINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURES Concrete Grade 30 Foundations 13,524.00 m3 98 A 138.00 ground beamsGround slabs8,625.00 m2 500 B 17.25 125mm thick3,353.40 m2 162 C 20.70 150mm thick193.20 m2 8 D 24.15 175mm thick3,974.40 m2 144 E 27.60 200mm thickGround slabs; forming or laying to falls; including extra labour276.00 m2 16 F 17.25 125mm thickMild steel bar reinforcement10mm Links, stirrups and binders4,433.75 kg 3,547 G 1.25 in ground beams12mm Links, stirrups and binders492.50 kg 394 H 1.25 in ground beamsHigh tensile steel bar reinforcement10mm General straight and bent bars285.00 kg 228 I 1.25 in pile caps, column and stanchion bases and the like9,915.00 kg 7,932 J 1.25 in ground slabs57.50 kg 46 K 1.25 in ground beams12mm General straight and bent bars1,571.25 kg 1,257 L 1.25 in pile caps, column and stanchion bases and the like2,683.75 kg 2,147 M 1.25 in ground slabs2,028.75 kg 1,623 N 1.25 in ground beams16mm General straight and bent bars3,911.25 kg 3,129 O 1.25 in pile caps, column and stanchion bases and the like1,447.50 kg 1,158 P 1.25 in ground beams20mm General straight and bent bars9,900.00 kg 7,920 Q 1.25 in pile caps, column and stanchion bases and the like3,188.75 kg 2,551 R 1.25 in ground beams25mm General straight and bent bars10,982.50 kg 8,786 S 1.25 in ground beamsTo CollectionJ 19880,843.50B3.2/3LOWEST SLAB & FOUNDATIONSQty Unit Rate Item Description Amount B$REINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURES FormworkVertical surfaces5,959.50 m2 411 A 14.50 pile caps, column and stanchion bases and the like7,119.50 m2 491 B 14.50 ground beamsSloping surfaces; soffits of slabs, staircases and the like232.00 m2 16 C 14.50 generallyEdges and breaks in slabs and walls; soffits of walls, sides of upstands, risers, open strings of stairs and the like vertical1,532.50 m 613 D 2.50 100mm - 200mm wide297.50 m 85 E 3.50 100mm - 200mm wide; curvedSUNDRIESPolythene sheet damp proof membrane; 250 micron (1000gauge) thick; lapping and sealing joints484.80 m2 808 F 0.60 on blinded surfaces of excavationTo CollectionJ 19815,625.80B3.2/4Addendum No.1LOWEST SLAB & FOUNDATIONSQty Unit Rate Item Description Amount B$LOWEST SLAB & FOUNDATIONS CollectionFrom Page B3.2/1 11,289.50From Page B3.2/1+1 15,042.00From Page B3.2/2 80,843.50From Page B3.2/3 15,625.80To Bill No. 3 SummaryJ 198122,800.80B3.3/1Qty Unit Rate Item Description Amount B$FRAMEREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Isolated piers, columns, struts and the like24,426.00 m3 177 A 138.00 generallyBeams, braces, cantilevers and the like33,948.00 m3 246 B 138.00 generallyMild steel bar reinforcement10mm Links, stirrups and binders36,556.25 kg 29,245 C 1.25 in isolated columns, beams and lintolsHigh tensile steel bar reinforcement12mm General straight and bent bars3,181.25 kg 2,545 D 1.25 in isolated columns, beams and lintols16mm General straight and bent bars22,178.75 kg 17,743 E 1.25 in isolated columns, beams and lintols20mm General straight and bent bars4,086.25 kg 3,269 F 1.25 in isolated columns, beams and lintols25mm General straight and bent bars42,222.50 kg 33,778 G 1.25 in isolated columns, beams and lintolsFormworkVertical surfaces54,302.50 m2 3,745 H 14.50 piers, columns, stanchions struts and the likeSides and soffits of beams and lintols; vertical sides; flat soffits34,553.50 m2 2,383 I 14.50 strutting 3.50m - 5.00m highTo CollectionJ 198255,455.00B3.3/2FRAMEQty Unit Rate Item Description Amount B$FRAME CollectionFrom Page B3.3/1 255,455.00To Bill No. 3 SummaryJ 198255,455.00B3.4/1Qty Unit Rate Item Description Amount B$UPPER FLOORSREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Suspended slabs593.40 m2 43 A 13.80 100mm thick29,946.00 m2 1,736 B 17.25 125mm thick6,251.40 m2 302 C 20.70 150mm thickHigh tensile steel bar reinforcement10mm General straight and bent bars25,497.50 kg 20,398 D 1.25 in suspended slabs, roofs, canopies and the likeFormworkFlat surfaces; soffits of slabs and the like27,666.00 m2 1,908 E 14.50 strutting 3.50m - 5.00m highEdges and breaks in slabs and walls; soffits of walls, sides of upstands, risers, open strings of stairs and the like vertical176.00 m 88 F 2.00 not exceeding 100mm wide1,790.00 m 716 G 2.50 100mm - 200mm wideTo CollectionJ 19891,920.30B3.4/2UPPER FLOORSQty Unit Rate Item Description Amount B$UPPER FLOORS CollectionFrom Page B3.4/1 91,920.30To Bill No. 3 SummaryJ 19891,920.30B3.5/1Qty Unit Rate Item Description Amount B$ROOF STRUCTUREREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Suspended slabs879.75 m2 51 A 17.25 125mm thickGutter slabs1,462.80 m2 106 B 13.80 100mm thickGutter sides2,090.70 m2 101 C 20.70 150mm thickHigh tensile steel bar reinforcement10mm Links, stirrups and binders976.25 kg 781 D 1.25 in cover slabs, gutter slabs, shelves, sills and the like10mm General straight and bent bars343.75 kg 275 E 1.25 in suspended slabs, roofs, canopies and the like687.50 kg 550 F 1.25 in cover slabs, gutter slabs, shelves, sills and the like12mm General straight and bent bars966.25 kg 773 G 1.25 in suspended slabs, roofs, canopies and the like4,682.50 kg 3,746 H 1.25 in cover slabs, gutter slabs, shelves, sills and the likeFormworkFlat surfaces; soffits of slabs and the like2,276.50 m2 157 I 14.50 strutting 3.50m - 5.00m highVertical surfaces3,618.00 m2 201 J 18.00 Sides of gutterROOF STRUCTURENoteK The Contractor is to price this section of works based on any one of the brand of roof truss system stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of roof truss system (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the roof truss system shall be in accordance to manufacturer's recommendation.To CollectionJ 19817,984.00B3.5/2ROOF STRUCTUREQty Unit Rate Item Description Amount B$ROOF STRUCTURE BLUESCOPE LYSAGHT / HASMIT / INTERLINE or other equal and approved (Contractor to fill in the brand of roof truss system in the following space provided) _______________________________________ Roof Truss SystemDesign, supply and install the whole of the galvanised mild steel roof structure system for Administration and Common Block complete with all necessary purlins, rafters, hip rafters, valley rafters, wall plates, crossing or strap bracing and other necessary fixing accessories; including all necessary priming and painting finishes; all fabricated, bolted, welded, connected and braced in accordance to manufacturer's / supplier's recommendation; all toEngineer and Superintending Officer's approval23,800.00 m2 952 A 25.00 generally (roof area measured flat on plan)To CollectionJ 19823,800.00B3.5/3ROOF STRUCTUREQty Unit Rate Item Description Amount B$ROOF STRUCTURE CollectionFrom Page B3.5/1 17,984.00From Page B3.5/2 23,800.00To Bill No. 3 SummaryJ 19841,784.00B3.6/1Qty Unit Rate Item Description Amount B$ROOF FINISHCEMENT ROOFINGCement and sand (1:3); waterproofed with specified additive; finishing smoothRoofing450.00 m2 45 A 10.00 50mm thick (average); finishing to falls19mm Skirtings; rounded top edge; angle fillet at bottom366.00 m 61 B 6.00 500mm (average) high19mm Lining to gutter sides; rounded top edge; angle fillet at bottom1,200.00 m 200 C 6.00 500mm (average) highLining to gutter soles 600mm wide138.00 m 23 D 6.00 30mm (average) thick; finishing to fallsLining to gutter soles 1400mm wide882.00 m 63 E 14.00 30mm (average) thick; finishing to fallsLining to gutter soles 2200mm wide132.00 m 6 F 22.00 30mm (average) thick; finishing to fallsSPECIFIED SHEET MEMBRANE PANEL ROOFINGNotesG The Contractor is to price this section of works based on any one of the brand of materials for waterproofing stated in the item description. The contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.SIKALISTIC 450 / KEMSCREED BRUSHBOND / FOSROC BRUSHBOND or other equal and approved (Contractor to fill in the brand of material in the following space provided)_________________________ waterproofing according to manufacturer's detailsMembrane roof coverings810.00 m2 45H18.00laying to falls or slopes on underbeds (measured separately)Membrane and all labour in skirtings610.00 m 61 I 10.00 500mm (average) girthMembrane and all labour in finishings to gutters to falls4,392.00 m2 244 J 18.00 top,sides and soles of guttersTo CollectionJ 1988,980.00B3.6/2ROOF FINISHQty Unit Rate Item Description Amount B$PROFILED STEEL SHEET ROOF COVERINGSInsulation work'Rockwool' 50mm Thick 80kg/m311,440.00 m2 1,040 A 11.00 laying over purlins under roof coverings'BRC Weldmesh' galvanised roofmesh; well lapped832.00 m2 1,040 B 0.80 laying over and wiring to steel purlinsAluminium foil faced building paper; well lapped1,820.00 m2 1,040 C 1.75 laying on meshwork under roof coveringsNotesD The Contractor is to price this section of works based on any one of the brand of materials for the steel roof sheeting and accessories stated in the description. The contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.0.53mm thick MULTIKLIP Multicote G6 finish / LYSAGHT KLIPLOK / SPANLOK or other equal and approved (Contractor to fill in the brand of material in the following space provided) _____________________________________________ roof steel sheeting and accessories; fixing all according to manufacturer's detailsSheeting; with screwed or blind riveted side laps; fixing to steel purlins or rails with self tapping screws and washers27,040.00 m2 1,040 E 26.00 roof coverings not exceeding 50 degrees pitchEaves closure294.00 m 294 F 1.00 filling with PVC foam filler stripsStandard ridge cappings; fastening to sheeting ribs846.00 m 47 G 18.00 405mm girth; twice times bentStandard corner moulds; fastening to sheeting ribs2,790.00 m 155 H 18.00 305mm girth; twice times bentStandard parapet flashings; fastening to sheeting ribs1,422.00 m 79I18.00generally; turning down edge and notching to profile of roof sheeting; including chasing into concrete or brickwall; pointing with siliconeTo CollectionJ 19846,484.00B3.6/3ROOF FINISHQty Unit Rate Item Description Amount B$FINISHINGS9mm thick GRC fascia boardFascias3,087.00 m 343 A 9.00 250 x 9mm; in one widthEXTERNAL PAINTINGNotesB The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The contractor is required to specify, initial and stamp chop the brand of painting (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Biofine Satin / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of painting in the following space provided) Preparing; applying one coat_____________________________sealer; two coats________________________________emulsion paint on gypsum or similar board surfaces in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalFascias and the like492.00 m2 123 C 4.00 generallyTo CollectionJ 1983,579.00B3.6/4ROOF FINISHQty Unit Rate Item Description Amount B$ROOF FINISH CollectionFrom Page B3.6/1 8,980.00From Page B3.6/2 46,484.00From Page B3.6/3 3,579.00To Bill No. 3 SummaryJ 19859,043.00B3.7/1Qty Unit Rate Item Description Amount B$ROOF DRAINAGERAINWATER GOODSUnplasticised PVC rainwater pipes and fittings; SS 141 Class B; jointing in accordance with the manufacturer's instructionsPipes; casting in reinforced concrete columns2,728.00 m 124 A 22.00 200mm diameterPipes; laying in trenches; including all necessary excavation; backfilling etc.286.00 m 11 B 26.00 200mm diameterExtra over for bends168.00 No 14 C 12.00 200mm diameter pipesUnplasticised PVC roof outletsRoof outlets; screwed domical grating; luting flange for finishes; setting in reinforced concrete slab; jointing to downpipe1,190.00 No 14 D 85.00 200mm diameter outgo; including adaptor for UPVC pipeTo CollectionJ 1984,372.00B3.7/2ROOF DRAINAGEQty Unit Rate Item Description Amount B$ROOF DRAINAGE CollectionFrom Page B3.7/1 4,372.00To Bill No. 3 SummaryJ 1984,372.00B3.8/1Qty Unit Rate Item Description Amount B$STAIRCASESREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Beams, braces, cantilevers and the like276.00 m3 2 A 138.00 generallySteps and staircases including strings3,312.00 m3 24 B 138.00 generallyLandings1,304.10 m2 54 C 24.15 175mm thickMild steel bar reinforcement10mm Links, stirrups and binders162.50 kg 130 D 1.25 in isolated columns, beams and lintolsHigh tensile steel bar reinforcement10mm General straight and bent bars1,208.75 kg 967 E 1.25 in steps, staircases, strings and associated landing12mm General straight and bent bars3,146.25 kg 2,517 F 1.25 in steps, staircases, strings and associated landing16mm General straight and bent bars283.75 kg 227 G 1.25 in isolated columns, beams and lintolsFormworkFlat surfaces; soffits of slabs and the like144.00 m2 8 H 18.00 strutting not exceeding 3.50m high702.00 m2 39 I 18.00 strutting 3.50m - 5.00m highSloping surfaces; soffits of slabs, staircases and the like612.00 m2 34 J 18.00 strutting not exceeding 3.50m high756.00 m2 42 K 18.00 strutting 3.50m - 5.00m highSides and soffits of beams and lintols; vertical sides; flat soffits198.00 m2 11 L 18.00 strutting not exceeding 3.50m high342.00 m2 19 M 18.00 strutting 3.50m - 5.00m highEdges and breaks in slabs and walls; soffits of walls, sides of upstands, risers, open strings of stairs and the like vertical468.00 m2 26 N 18.00 over 300mm wide1,220.00 m 305 O 4.00 100mm - 200mm wideTo CollectionJ 19814,135.35B3.8/2STAIRCASESQty Unit Rate Item Description Amount B$STAINLESS STEELRaking balustrades; forged and welded togetherTop rails2,784.00 m 58 A 48.00 tubes 62mm diameter (SS 316)Extra over rails for bends440.00 No 22 B 20.00 tubes 62mm diameter (SS 316)Intermediate rails5,075.00 m 145 C 35.00 tubes 30mm diameter (SS 314)Vertical support; 120mm long; welded to top rails and balusters; including capping plates as shown in drawing no. A-49840.00 No 56D15.00tubes 20mm diameter (SS 314); as shown in drawing no. A-49Balusters 630mm long170.00 No 2 E 85.00 tubes; 100mm diameter (SS 314)Balusters 800mm long2,160.00 No 54 F 40.00 tubes; 62mm diameter (SS 316)Decorative ring; welded to and around 100mm diameter balusters (measured separately)90.00 No 6 G 15.00 tubes; 12mm diameter (SS304)Plates; welding to bottom of standards or balusters; for bolting to concrete810.00 No 54 H 15.00 122 x 50 x 6mm thick (SS 304)30.00 No 2 I 15.00 160 x 50 x 6mm thick (SS 304)Expansion bolts672.00 No 112 J 6.00 bolts 6mm diameter; not exceeding 75mm longINTERNAL BEDS AND BACKINGSCement and sand (1:3)Screeded beds to landings207.00 m2 23 K 9.00 20mm thickScreeded beds to treads44.00 m 8 L 5.50 20mm thick x 280mm wide726.00 m 132 M 5.50 20mm thick x 300mm wideScreeded backings to risers462.00 m 132 N 3.50 20mm thick x 150mm high28.00 m 8 O 3.50 20mm thick x 240mm highTo CollectionJ 19814,538.00B3.8/3STAIRCASESQty Unit Rate Item Description Amount B$INTERNAL INSITU FINISHINGSPlastering in cement and sand (1:3) gauged with plasticiser13mm To soffits90.00 m2 10 A 9.00 not exceeding 3.50m above floor144.00 m2 16 B 9.00 3.50m - 5.00m above floor13mm To sloping soffits of stairs324.00 m2 36 C 9.00 not exceeding 3.50m above floor810.00 m2 90 D 9.00 3.50m - 5.00m above floor13mm To open strings196.00 m 49 E 4.00 300mm wide extremeEXTERNAL BEDS AND BACKINGSCement and sand (1:3)Screeded beds to treads473.00 m 86 F 5.50 20mm thick x 300mm wideScreeded backings to risers301.00 m 86 G 3.50 20mm thick x 150mm highINTERNAL TILE, SLAB AND BLOCK FINISHINGSNotesH The Contractor is to price this section of works based on any one of the brand of homogeneous tiles and laminated timber flooring stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of homogeneous tile and laminated timber flooring (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the homogeneous tiles and laminated timber flooring shall be in accordance to manufacturer's recommendation.To CollectionJ 1982,338.00B3.8/4STAIRCASESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS MML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of homogeneous tile in the following space provided) __________________________ homogeneous tiles in polished surface finish; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutLandings605.00 m2 11 A 55.00 generallyMML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of homogeneous tile in the following space provided) __________________________ homogeneous tiles in matt. surface finish; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutLandings406.00 m2 14 B 29.00 generallyRisers1,980.00 m 132 C 15.00 150mm highMML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of homogeneous tile in the following space provided) __________________________ homogeneous step tiles in matt surface finish; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutTreads1,666.00 m 98 D 17.00 300mm wideTo CollectionJ 1984,657.00B3.8/5STAIRCASESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS MML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of homogeneous tile in the following space provided) __________________________ homogeneous tiles in polished surface finish; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutTreads646.00 m 38 A 17.00 300mm wideALOMI 8.3mm thick Heavy Duty Laminate Flooring with uniclick system and Aluminium Oxide Protective Coating including standard underlay / TATEX 11013 silver high density sponge or other equal and approved (Contractor to fill in the brand of material in the following space provided) laminated timber flooring; colour and pattern to Superintending Officer's approval; fixing with approved adhesive; secret nailing; sanding after laying190.00 m2 2 B 95.00 FlooringRisers240.00 m 8 C 30.00 240mm highTreads240.00 m 8 D 30.00 280mm wideExtra over general tiling for special tiles200.00 m 8 E 25.00 nosing bead tilesEXTERNAL TILE, SLAB AND BLOCK FINISHINGSNotesF The Contractor is to price this section of works based on any one of the brand of homogeneous tiles stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of homogeneous tile (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the homogeneous tiles shall be in accordance to manufacturer's recommendation.To CollectionJ 1981,516.00B3.8/6STAIRCASESQty Unit Rate Item Description Amount B$EXTERNAL TILE, SLAB AND BLOCK FINISHINGS MML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of homogeneous tile in the following space provided) __________________________ homogeneous tiles; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutRisers602.00 m 86 A 7.00 150mm highTreads602.00 m 86 B 7.00 300mm wideINTERNAL PAINTINGNotesC The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of painting (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Biofine Intermatt/ ICI DULUX / JOTUN or other equal and approved paint (Contractor to fill in the brand of paint in the following space provided) Preparing; applying one coat_______________________sealer; two coats______________________ emulsion paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalPlastered surfaces184.00 m2 46 D 4.00 ceilings and beams; not exceeding 3.50m high424.00 m2 106 E 4.00 ceilings and beams; 3.5m - 5m high116.00 m2 29 F 4.00 open stringsTo CollectionJ 1981,928.00B3.8/7STAIRCASESQty Unit Rate Item Description Amount B$STAIRCASES CollectionFrom Page B3.8/1 14,135.35From Page B3.8/2 14,538.00From Page B3.8/3 2,338.00From Page B3.8/4 4,657.00From Page B3.8/5 1,516.00From Page B3.8/6 1,928.00To Bill No. 3 SummaryJ 19839,112.35B3.9/1Qty Unit Rate Item Description Amount B$EXTERNAL WALLS & CLADDINGREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 25Stiffeners138.00 m3 1 A 138.00 generallyConcrete Grade 30Walls5,830.50 m2 338 B 17.25 125mm thickMild steel bar reinforcement10mm Links, stirrups and binders2.50 kg 2 C 1.25 in stiffenersHigh tensile steel bar reinforcement10mm General straight and bent bars31.25 kg 25 D 1.25 in stiffeners2,272.50 kg 1,818 E 1.25 in walls12mm General straight and bent bars1,678.75 kg 1,343 F 1.25 in wallsFormworkVertical surfaces32.00 m2 2 G 16.00 stiffeners10,832.00 m2 677 H 16.00 walls, balustrades, planter sides and the likePRECAST CONCRETE WORKConcrete Grade 25Lintols; with two 12mm diameter high tensile steel bar reinforcement top and bottom and 6mm diameter mild steel bar reinforcement at every 200mm intervals; including stoolings and returned ends90.00 m 6 I 15.00 150 x 150mmProjecting sills; including formwork, fair finishes, angles, ends and intersections1,716.00 m 143 J 12.00 70 x 150mmCommon clay bricks in cement mortar (1:3)Half brick thick; reinforcing every fourth course with mesh reinforcement31,255.00 m2 1,645 K 19.00 wallsOne and a half brick thick2,116.00 m2 46 L 46.00 wallsTo CollectionJ 19855,994.50B3.9/2EXTERNAL WALLS & CLADDINGQty Unit Rate Item Description Amount B$SundriesDamp proof courses; BS 743 type 5B; well lapped340.00 m 136 A 2.50 horizontal; 102.5mm wideSPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKSNotesB The Contractor is referred to Bill No. B3.10-Windows for notes on the Specialist Contractor Design Aluminium Works which are also applicable in this section.C All aluminium louvres works shall refer to Architectural Drawing No. A-20aWINTEC EL120 / TECHNAL - TOPAZE / QINYA - ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ________________________ powder coated aluminium eliptical fixed louvres system; as per manufacturer's detail and specification and Architect's approvalEliptical fixed louvre576.00 No 2 D 288.00 1100 x 900mm high overall ('30' At Ramp - Admin Block)808.00 No 2 E 404.00 1400 x 1000mm high overall ('6' Left Side - Admin Block)2,864.00 No 2 F 1,432.00 1400 x 3550mm high overall ('5' Front - Admin Block)718.00 No 2 G 359.00 1500 x 830mm high overall ('28' Rear - Common Block)1,728.00 No 4 H 432.00 1500 x 1000mm high overall ('4' Front - Admin Block)2,074.00 No 2 I 1,037.00 1500 x 2400mm high overall ('29' Rear - Common Block)1,580.00 No 4J395.001612 x 850mm high overall ('14' Right Side - Admin Block)1,960.00 No 4 K 490.00 1700 x 1000mm high overall ('3' Front - Admin Block)1,210.00 No 1 L 1,210.00 2100 x 2000mm high overall ('1' Front - Admin Block)1,383.00 No 1 M 1,383.00 2400 x 2000mm high overall ('2' Front - Admin Block)882.00 No 1N882.003600 x 850mm high overall ('15' Right Side - Admin Block)1,050.00 No 2O525.001840 x 990mm high overall (trapezoridal shaped) ('9' & '18' Left & Right Side - Common Block)To CollectionJ 19817,173.00B3.9/3EXTERNAL WALLS & CLADDINGQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC EL120 / TECHNAL - TOPAZE / QINYA - ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ________________________ powder coated aluminium eliptical fixed louvres system; as per manufacturer's detail and specification and Architect's approval Eliptical fixed louvre 1,230.00 No 2A615.001840 x 1160mm high overall (parallelogram shaped) ('10' & '19' Left & Right Side - Common Block)3,498.00 No 2B1,749.001940 x 3130mm high overall (trapezoridal shaped) ('12' & '21' Left & Right Side - Admin Block)3,226.00 No 2C1,613.002000 x 2090mm high overall (iregular shaped) ('11' & '20' Left & Right Side - Admin Block)WINTEC EL150 / TECHNAL - TOPAZE / QINYA - ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ________________________ powder coated aluminium eliptical fixed louvres system; as per manufacturer's detail and specification and Architect's approvalSUNBLOCK eliptical fixed louvre11,633.00 No 1D11,633.003310 x 10650mm high overall ('13' Left Side - Common Block)14,965.00 No 1E14,965.003310 x 13700mm high overall ('23' Right Side - Common Block)16,603.00 No 1F16,603.003310 x 15200mm high overall ('22' Right Side - Admin Block)STAINLESS STEELRailings; forged and welded togetherTop rails144.00 m 3 G 48.00 tubes 60mm diameter (SS 316)Top rails; curved186.00 m 3 H 62.00 tubes 60mm diameter (SS 316)Intermediate rails160.00 m 4 I 40.00 tubes 50mm diameter (SS 304)Intermediate rails; curved312.00 m 6 J 52.00 tubes 50mm diameter (SS 304)To CollectionJ 19851,957.00B3.9/4EXTERNAL WALLS & CLADDINGQty Unit Rate Item Description Amount B$STAINLESS STEEL Railings; forged and welded together Bottom rails80.00 m 2 A 40.00 tubes 50mm diameter (SS 304)Bottom rails; curved156.00 m 3 B 52.00 tubes 50mm diameter (SS 304)Deco railing120.00 m 4 C 30.00 tubes 25mm diameter (SS 304)294.00 m 7 D 42.00 tubes 25mm diameter; curved (SS 304)7,965.00 m 59 E 135.00 tubes 100mm diameter (SS 316)4,875.00 m 195 F 25.00 6mm thick x 50mm wide (SS 304)120.00 No 3 G 40.00 50mm square tube (SS 304); 800mm girthDecorative ball120.00 No 2 H 60.00 75mm diameter (SS 304)144.00 No 3 I 48.00 50mm diameter (SS 304)Balusters 1200mm long120.00 No 2 J 60.00 tubes; 60mm diameter (SS 316)Plates; welding to bottom of standards or balusters; for bolting to concrete60.00 No 4 K 15.00 100 x 100 x 6mm thick (SS 304)Expansion bolts216.00 No 36 L 6.00 bolts 6mm diameter; not exceeding 75mm longSundriesDecorative railing as shown in Architect Drawing No: A11 and Structural Drawing No:M51,350.00 m 5 M 270.00 tubes 200mm diameter (SS 316)Decorative post 1950mm long; as shown in Architect Drawing No: A11 and Structural Drawing No:M51,054.00 No 2 N 527.00 tubes 200mm diameter (SS 316)Decorative post 3700mm long; as shown in Architect Drawing No: A10 & A112,000.00 No 4 O 500.00 tubes 100mm diameter (SS 316)Plates; welding to bottom of posts; for bolting to concrete378.00 No 6 P 63.00 300 x 300 x 6mm thick (SS 304)150.00 No 6 Q 25.00 150 x 150 x 6mm thick (SS 304)Expansion bolts168.00 No 24 R 7.00 bolts 10mm diameter; 75 - 150mm longTo CollectionJ 19819,370.00B3.9/5EXTERNAL WALLS & CLADDINGQty Unit Rate Item Description Amount B$EXTERNAL WALLS & CLADDING CollectionFrom Page B3.9/1 55,994.50From Page B3.9/2 17,173.00From Page B3.9/3 51,957.00From Page B3.9/4 19,370.00To Bill No. 3 SummaryJ 198144,494.50B3.10/1Qty Unit Rate Item Description Amount B$WINDOWSPRECAST CONCRETE WORKConcrete Grade 25Lintols; with two 12mm diameter high tensile steel bar reinforcement top and bottom and 6mm diameter mild steel bar reinforcement at every 200mm intervals; including stoolings and returned ends4,950.00 m 330 A 15.00 115 x 230mmProjecting sills; including formwork, fair finishes, angles, ends and intersections1,170.00 m 78 B 15.00 115 x 230mmSPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKSNotesC The Contractor is to price this section of works based on any one of the brand of materials for aluminium windows stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.D The Contractor is required to price separately the component parts of the glazed aluminium works as provided for in these BillsE Prices for aluminium works shall include everything for the complete installation including all supports, fixing accessories, flashings, cappings, matching hardware, weather stripping opening lights, packing around and into frames with cement mortar and pointing externally with sealant properly caulkedF Prices for glazing shall include everything necessary for the complete installation including glazing beads, gaskets, glass adaptors, setting blocks, and glazing sealantsG Prices for windows shall include for approved ironmongeryH The contractor shall check the whole of the dimension on site and if any discrepency in or between the specifications, drawings or instructions issued and condition of site, he shall notify the Superintending Officer immediately before proceeding with the worksI All window works shall refer to Architectural Drawing No. A-18 & A-19To CollectionJ 1986,120.00B3.10/2WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's detailsWindow type W110,348.00 No 4A2,587.00aluminium works to window size 1800 x 2200mm overall; comprising 4 nos of swing panel each size 450 x 2200mm428.00 No 4B107.00glazing in 6mm thick blue tinted glass to window size 1800 x 2200mm overallWindow type W22,772.00 No 12C231.00aluminium works to window size 1500 x 2200mm overall; comprising 1 nos of fixed panel size 1500 x 2200mm1,068.00 No 12D89.00glazing in 6mm thick blue tinted glass to window size 1500 x 2200mm overallWindow type W31,024.00 No 8E128.00aluminium works to window size 1000 x 700mm overall; comprising 2 nos of top hung panel each size 500 x 700mm152.00 No 8F19.00glazing in 6mm thick blue tinted glass to window size 1000 x 700mm overallWindow type W42,324.00 No 7G332.00aluminium works to window size 1500 x 1650mm overall; comprising 2 nos of fixed panel each size 900 x 825mm and 1 nos of swing panel size 600 x 1650mm469.00 No 7H67.00glazing in 6mm thick blue tinted glass to window size 1500 x 1650mm overallWindow type W4b1,460.00 No 5I292.00aluminium works to window size 1500 x 1450mm overall; comprising 2 nos of fixed panel each size 900 x 725mm and 1 nos of swing panel size 600 x 1450mm295.00 No 5J59.00glazing in 6mm thick blue tinted glass to window size 1500 x 1450mm overallWindow type W51,368.00 No 8K171.00aluminium works to window size 1800 x 500mm overall; comprising 4 nos of top hung panel each size 450 x 500mm192.00 No 8L24.00glazing in 6mm thick blue tinted glass to window size 1800 x 500mm overallTo CollectionJ 19821,900.00B3.10/3WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's details Window type W61,114.00 No 2A557.00aluminium works to window size 3500 x 2100mm overall; comprising 1 nos of fixed panel size 1500 x 2100mm and 1 nos of fixed panel size 2000 x 2100mm1,690.00 No 2B845.00glazing in 8.38mm thick tinted laminated glass to window size 3500 x 2100mm overallWindow type W76,707.00 No 19C353.00aluminium works to window size 2400 x 2100mm overall; comprising 1 nos of fixed panel size 2400 x 2100mm11,020.00 No 19D580.00glazing in 8.38mm thick tinted laminated glass to window size 2400 x 2100mm overallWindow type W7a354.00 No 2E177.00aluminium works to window size 1200 x 2100mm overall; comprising 1 nos of fixed panel size 1200 x 2100mm580.00 No 2F290.00glazing in 8.38mm thick tinted laminated glass to window size 1200 x 2100mm overallWindow type W840,748.00 No 61G668.00aluminium works to window size 1500 x 3250mm overall; comprising 4 nos of fixed panel each size 750 x 900mm and 2 nos of swing panel each size 750 x 1450mm8,052.00 No 61H132.00glazing in 6mm thick blue tinted glass to window size 1500 x 3250mm overallWindow type W8a1,869.00 No 3I623.00aluminium works to window size 1400 x 3250mm overall; comprising 4 nos of fixed panel each size 700 x 900mm and 2 nos of swing panel each size 700 x 1450mm369.00 No 3J123.00glazing in 6mm thick blue tinted glass to window size 1400 x 3250mm overallWindow type W93,950.00 No 1K3,950.00aluminium works to window size 8000 x 5051mm overall; comprising 30 nos of fixed panel each size 800 x 1417mm and 4 nos of fixed panel each size 800 x 800mmTo CollectionJ 19876,453.00B3.10/4WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's details Window type W9 988.00 No 1A988.00glazing in 6mm thick blue tinted glass to window size 8000 x 5051mm overallWindow type W101,317.00 No 1B1,317.00aluminium works to window size 5600 x 2400mm overall; comprising 7 nos of fixed panel each size 800 x 1500mm and 7 nos of fixed panel each size 800 x 900mm363.00 No 1C363.00glazing in 6mm thick blue tinted glass to window size 5600 x 2400mm overallWindow type W111,407.00 No 1D1,407.00aluminium works to window size 5600 x 2100.mm overall; comprising 4 nos of fixed panel each size 800 x 1400mm; 10 nos of fixed panel each size 800 x 700mm and 3 nos of top hung panel each size 800 x 700mm318.00 No 1E318.00glazing in 6mm thick blue tinted glass to window size 5600 x 2100mm overallWindow type W12665.00 No 1F665.00aluminium works to window size 5600 x 1100mm overall; comprising 7 nos of fixed panel each size 800 x 1100mm167.00 No 1G167.00glazing in 6mm thick blue tinted glass to window size 5600 x 1100mm overallWindow type W12a880.00 No 2H440.00aluminium works to window size 3700 x 1100mm overall; comprising 5 nos of fixed panel each size 740 x 1100mm220.00 No 2I110.00glazing in 6mm thick blue tinted glass to window size 3700 x 1100mm overallTo CollectionJ 1986,325.00B3.10/5WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's details Window type W1314,516.00 No 2A7,258.00aluminium works to window u-shape on plan size 5600 x 11250mm overall; comprising 24 nos of fixed panel each size 800 x 900mm; 6 nos of fixed panel each size 800 x 1450mm; 24 nos of fixed panel each size 800 x 1550mm; 8 nos of fixed panel each size 400 x 900mm; 2 nos of fixed panel each size 400 x 725mm; 4 nos of fixed panel each size 400 x 775mm; 4 nos of fixed panel each size 400 x 1550mm; 2 nos of swing panel each size 400 x 725mm and 4 nos of swing panel each size 400 x 775mm3,402.00 No 2B1,701.00glazing in 6mm thick blue tinted glass to window size 5600 x 11250mm overallWindow type W1412,572.00 No 2C6,286.00aluminium works to window u-shape on plan size 4800 x 11250mm overall; comprising 20 nos of fixed panel each size 800 x 900mm; 5 nos of fixed panel each size 800 x 1450mm; 20 nos of fixed panel each size 800 x 1550mm; 8 nos of fixed panel each size 400 x 900mm; 2 nos of fixed panel each size 400 x 725mm; 4 nos of fixed panel 400 x 1550mm; 4 nos of fixed panel each size 400 x 775mm; 2 nos of swing panel each size 400 x 725mm and 4 nos of swing panel each size 400 x 775mm2,916.00 No 2D1,458.00glazing in 6mm thick blue tinted glass to window size 4800 x 11250mm overallTo CollectionJ 19833,406.00B3.10/6WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's details Window type W156,528.00 No 1A6,528.00aluminium works to window u-shape on plan size 4000 x 13151mm overall; comprising 4 nos of fixed panel each size 800 x 750mm; 8 nos of fixed panel each size 800 x 900mm; 8 nos of fixed panel each size 800 x 1600mm; 8 nos of fixed panel each size 800 x 1400mm; 2 nos of fixed panel each size 800 x 1060mm; 2 nos of fixed panel each size 800 x 500mm; 6 nos of fixed panel each size 400 x 1000mm; 6 nos of fixed panel each size 400 x 1600mm; 4 nos of fixed panel each size 400 x 2400mm; 2 nos of fixed panel each size 400 x 1900mm; 2 nos of fixed panel each size 400 x 900mm; 2 nos of fixed panel each size 400 x 750mm; 16 nos of top hung panel each size 800 x 500mm and 2 nos of top hung panel each size 800 x 560mm123.00 No 1B123.00aluminium works to window size 1400 x 400mm overall; comprising 4 nos of top hung panel each size 350 x 400mm1,420.00 No 1C1,420.00glazing in 6mm thick blue tinted glass to window size 4000 x 13151mm overall15.00 No 1D15.00glazing in 6mm thick blue tinted glass to window size 1400 x 400mm overallWindow type W162,229.00 No 1E2,229.00aluminium works to window size 5600 x 3250mm overall; comprising 16 nos of fixed panel each size 700 x 900mm; 4 nos of fixed panel each size 700 x 1450mm and 4 nos of swing panel each size 700 x 1450mm492.00 No 1F492.00glazing in 6mm thick blue tinted glass to window size 5600 x 3250mm overallWindow type W16a864.00 No 1G864.00aluminium works to window size 4000 x 2000mm overall; comprising 10 nos of fixed panel each size 800 x 1000mm216.00 No 1H216.00glazing in 6mm thick blue tinted glass to window size 4000 x 2000mm overallTo CollectionJ 19811,887.00B3.10/7WINDOWSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC 05XF / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _______________________________ powder coated aluminium windows; including all necessary hinges, lockset, ironmongery and accessories to manufacturer's details Window type W17873.00 No 1A873.00aluminium works to window size 4800 x 1200mm overall; comprising 4 nos of fixed panel each size 800 x 600mm and 4 nos of swing panel each size 800 x 1200mm156.00 No 1B156.00glazing in 6mm thick blue tinted glass to window size 4800 x 1200mm overallWindow type W18250.00 No 5C50.00aluminium works to window size 500 x 500mm overall; comprising 1 no. of top hung panel size 500 x 500mm35.00 No 5D7.00glazing in 6mm thick blue tinted glass to window size 500 x 500mm overallTo CollectionJ 1981,314.00B3.10/8WINDOWSQty Unit Rate Item Description Amount B$WINDOWS CollectionFrom Page B3.10/1 6,120.00From Page B3.10/2 21,900.00From Page B3.10/3 76,453.00From Page B3.10/4 6,325.00From Page B3.10/5 33,406.00From Page B3.10/6 11,887.00From Page B3.10/7 1,314.00To Bill No. 3 SummaryJ 198157,405.00B3.11/1Qty Unit Rate Item Description Amount B$INTERNAL WALLSREINFORCED INSITU CONCRETE WORK; IN CONCRETE FRAMED STRUCTURESConcrete Grade 30Lift walls9,204.60 m2 290 A 31.74 230mm thickHigh tensile steel bar reinforcement12mm General straight and bent bars8,278.75 kg 6,623 B 1.25 in wallsFormworkVertical surfaces8,768.00 m2 548 C 16.00 lift wallsEdges and breaks in slabs and walls; soffits of walls, sides of upstands, risers, open strings of stairs and the like vertical456.00 m 76 D 6.00 200mm - 300mm wideCommon clay bricks in cement mortar (1:3)Half brick thick; reinforcing every fourth course with mesh reinforcement30,248.00 m2 1,592 E 19.00 wallsOne and a half brick thick874.00 m2 19 F 46.00 walls; building curved on planSundriesDamp proof courses; BS 743 type 5B; well lapped217.50 m 87 G 2.50 horizontal; 102.5mm wide25 x 3mm Mild steel holdfasts; one end bent and twice drilled and screwed to back of hardwood frame; other end fanged and building into joint of brickwork707.00 No 707 H 1.00 225mm girthPROPRIETARY PRODUCTSNotesI The Contractor is to price this section of works based on any one of the brand of toilet cubicle systems stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of toilet cubicle system (upon which his rates and prices are based on) in the space provided. Fixing of the system shall be in accordance to manufacturer's recommendation.To CollectionJ 19858,753.85B3.11/2INTERNAL WALLSQty Unit Rate Item Description Amount B$PROPRIETARY PRODUCTS Toilet cubicle partitions as specified; including partitions, pilasters, stabilisers, brackets, doors and ironmongeryMARATHON 30 / PRO - CUBIX J upiter (Contractor to fill in the brand of toilet cubicle system in the following space provided)____________________________________toilet cubicles system; cubicles with front pilasters 1950mm high; doors and divisions 1950mm high fixed clear of floors; complete with 12mm compact water resistant board with aluminium profile ironmongery, spring hinges, door handles, indicators, door stops or other necessary fixing accessories to manufacturer's fixing instructions colour to Architect's approval; all shown anddescribed in Architectural drawing no. AGA/034/09 (A-43)3,000.00 Sets 1A3,000.00sets for range of four cubicles 4150mm wide overall x 1200mm deep with 150mm floor clearance; comprising front pilasters with four doors and three divisions3,000.00 Sets 1B3,000.00sets for range of four cubicles 4151mm wide overall x 1200mm deep with 150mm floor clearance; comprising front pilasters with four doors and three divisions3,000.00 Sets 1C3,000.00sets for range of four cubicles 4152mm wide overall x 1200mm deep with 150mm floor clearance; comprising front pilasters with four doors and three divisions3,000.00 Sets 1D3,000.00sets for range of four cubicles 4160mm wide overall x 1200mm deep with 150mm floor clearance; comprising front pilasters with four doors and three divisions15,000.00 Sets 4E3,750.00sets for range of five cubicles 5000mm wide overall x 1200mm deep with 150mm floor clearance; comprising front pilasters with five doors and four divisionsTo CollectionJ 19827,000.00B3.11/3INTERNAL WALLSQty Unit Rate Item Description Amount B$INTERNAL WALLS CollectionFrom Page B3.11/1 58,753.85From Page B3.11/2 27,000.00To Bill No. 3 SummaryJ 19885,753.85B3.12/1Qty Unit Rate Item Description Amount B$DOORSPRECAST CONCRETE WORKConcrete Grade 25Lintols; with two 12mm diameter high tensile steel bar reinforcement top and bottom and 6mm diameter mild steel bar reinforcement at every 200mm intervals; including stoolings and returned ends2,865.00 m 191 A 15.00 115 x 230mmHeelstone cast to suit section of door frame; with 13mm diameter mild steel dowel 100mm long let into concrete and frame160.00 No 32 B 5.00 140 x 45 x 100mm highFLUSH DOORS AND PANELSHollow core doors and panelsDoors and panels; constructed with 100 x 25mm top, middle, bottom and side frames, 50 x 25mm intermediate frames; 25mm thick timber lipping all around; faced with 6mm thick plywood lined with waterproof laminate on both sides and 6mm thick wired glass vision panel (glass measured separately)1,000.00 No 4 C 250.00 850 x 2100mm high (D8)Forming glazing openings in 40mm flush doors; fitting with glazing beads loosely pinned in on both sides160.00 No 4 D 40.00 700 x 600mm high (D8)SOLID DOORS AND PANELSNyatohDecorative single leaf doors and panels; all as shown and described in Architectural drawing no. AGA/034/08 (A-17) and Superintending Officer's approval6,800.00 No 17 E 400.00 45mm thick doors; 850 x 2100mm high overall (D5)7,106.00 No 17 F 418.00 45mm thick doors; 850 x 2100mm high overall (D6)5,320.00 No 19 G 280.00 45mm thick doors; 850 x 2100mm high overall (D7)Decorative double leaf door with 6mm thick clear viewing glass panels (measured separately); all as shown and described in Architectural drawing no. AGA/034/08 (A-17) and Superintending Officer's approval9,870.00 No 14 H 705.00 45mm thick doors; 1200 x 2100mm high overall (D4a)2,508.00 No 3I836.0045mm thick doors; 1700 x 2100mm high overall (Type D4)To CollectionJ 19835,789.00B3.12/2DOORSQty Unit Rate Item Description Amount B$SOLID DOORS AND PANELS Nyatoh Decorative single leafclear glass vision panel (measured separately); all as shown and described in Architectural drawing no. AGA/034/08 (A-17) and Superintending Officer's approval8,400.00 No 20 A 420.00 45mm thick doors; 850 x 2100mm high overall (D6a)Forming glazing openings in 45mm flush doors; fitting with glazing beads loosely pinned in on both sides2,240.00 No 56 B 40.00 200 x 625mm high (D4a)480.00 No 12 C 40.00 200 x 625mm high (D4)1,600.00 No 40 D 40.00 200 x 625mm high (D6a)FIRE DOORSNotesE All fire rated doors must comply to manufacturer's details and Fire Services Department requirement and approval'MAICADOR' or other equal and approved One hour fire rated doors, frames, hardwares and all accessories to BOMBA requirement and approval (ironmongery measured separately) complete with 6mm thick georgian rire glass vision panel (measured separately); all as shown and described in Architectural drawing no. AGA/034/08 (A-17) and Superintending Officer's approvalSingle leaf doors3,750.00 No 5F750.0045mm thick doors to suit structural opening 970 x 2160mm high overall (D7a)Extra for glazing opening fitted with FR glass (measured separately); fitting with glazing beads loosely pinned in on bothsides200.00 No 5 G 40.00 150 x 600mm high overall (D7a)GROUNDS AND BACKINGSNyatohGrounds and backings for fixing joinery work6,825.00 m 525 H 13.00 140 x 50mmFRAMESNyatohDoor frames9,975.00 m 525 I 19.00 140 x 45mmTo CollectionJ 19833,470.00B3.12/3DOORSQty Unit Rate Item Description Amount B$FINISHINGSMDF boardArchitraves9,608.00 m 1,201 A 8.00 100mm x 16mm thickDOOR IRONMONGERYNotesB The Contractor is to price this section of works based on any one of the brand of ironmongery stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of ironmongery (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the ironmongery shall be in accordance to manufacturer's recommendation.Supplying and fixing ironmongery; to timberEntrance locks9,085.00 No 79C115.00YANK L07 US32D & 7260 / BALING Y81M07-NLS / ECOTILE H44R8Y, 200609S & 826935959 or other equal and approved (Contractor to fil in the brand of material in the following space provided)_________________________ lever handle complete with cylinder key and mortise lock and masterkeying systemLever handle714.00 No 14D51.00YANK L07-US32D / BALING Y81M07-NLS / ECOTILE H44 R8Y or other equal and approved (Contractor to fill in the brand of material in the following space provided) ___________________________________lever handleStainless steel ball bearing hinges3,360.00 No 336E10.00YANK 2043-2BB-US32D-304 / BALING Euro Master SS304 3" x 4" x 2.5mm 4BB / CONCEPT H1102 or other equal and approved (Contractor to fill in the brand of material in the following space provided)_______________________ stainless steel ball bearing hingesCabinet hinges120.00 No 12F10.00YANK 2043-US32D / BALING / CONCEPT or other equal and approved (Contractor to fill in the brand of material in the following space provided)______________________cabinet hingesTo CollectionJ 19822,887.00B3.12/4DOORSQty Unit Rate Item Description Amount B$DOOR IRONMONGERY Supplying and fixing ironmongery; to timber Flush bolts561.00 No 17A33.00YANK FBB-S box type 200/300mm/ BALING Euro Master G304 EM12 / CONCEPT 150/300 or other equal and approved (Contractor to fill in the brand of material in the following space provided)_________________________flush boltSurface mounted door closer7,623.00 No 99B77.00DORMA TS-68 / BALING TS-68 / CONCEPT 2022BC or other equal and approved (Contractor to fill in the brand of material in the following space provided) _________________________________surface mounted door closerDoor stops873.00 No 97C9.00YANK DS005CP / BALING Euro Master G304 EM002 / CONCEPT 2893 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ________________________________door stopperPull handle with Ball catch595.00 No 17D35.00YANK FP007 & BC001 / BALING Euro Master / CONCEPT or other equal and approved (Contractor to fill in the brand of material in the following space provided) _________________________________ square shape flush pull handle 150 x 50mm with ball catchConcealed handle255.00 No 17E15.00YANK / BALING Euro Master G304 / CONCEPT FRP70SS US32D or other equal and approved (Contractor to fill in the brand of material in the following space provided) _________________________________ concealed handleDust proof cover187.00 No 17F11.00YANK 1240CP / BALING Euro Master EMDC001 / CONCEPT or other equal and approved (Contractor to fill in the brand of material in the following space provided) _________________________________dust proof coverTo CollectionJ 19810,094.00B3.12/5DOORSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKSNotesA The Contractor is to price this section of works based on any one of the brand of materials for aluminium doors stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.B The Contractor is required to price separately the component parts of the glazed aluminium works as provided for in these BillsC Prices for aluminium works shall include everything for the complete installation including all supports, fixing accessories, flashings, cappings, matching hardware, weather stripping opening lights, packing around and into frames with cement mortar and pointing externally with sealant properly caulkedD Prices for glazing shall include everything necessary for the complete installation including glazing beads, gaskets, glass adaptors, setting blocks, and glazing sealantsE Prices for doors shall include for approved ironmongeryF Prices for swing doors shall include for double action floor springs, handles and locksetsG The contractor shall check the whole of the dimension on site and if any discrepency in or between the specifications, drawings or instructions issued and condition of site, he shall notify the Superintending Officer immediately before proceeding with the worksH All door works shall refer to Architectural Drawing No. A-17To CollectionJ 198B3.12/6DOORSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC PAD 2008 / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) _____________________________ powder coated glazed frameless automate sliding door; complete with approved automatic door operator system, ironmongery and other accessories as per manufacturer's detail and specification and Architect's approvalDoor type D111,700.00 No 2A5,850.00aluminium works to door size 4800 x 2100mm overall; comprising 1 no. of two way double leaf sliding doors size 1800 x 2100mm; 1 nos. of fixed glass panel each size 800 x 2100mm and 1 nos. of fixed glass panel each size 1600 x 2100mm5,090.00 No 2B2,545.00glazing in 12mm thick tempered glass to sliding doors and side view panel; completewith design sticker; 4800 x 2100mm overallWINTEC / TECHNAL-TOPAZE / QINYA-ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) __________________________ powder coated aluminium framed double swing door, completed with approved ironmongeries and other accessories as per manufacturer's detail and specification and Architect's approvalDoor type D22,538.00 No 1C2,538.00aluminium works to door size 3880 x 2644mm overall; comprising 1 no. ofdouble leaf swing doors size 1700 x 2100mm; 2 nos. of fixed glass panel each size 900 x 2644mm and 1 nos. of fixed glass panel each size 1700 x 544mm2,024.00 No 1D2,024.00glazing in 12mm thick tempered glass with design sticker to door size 3880 x 2644mm overallDoor type D3a4,084.00 No 2E2,042.00aluminium works to door size 3080 x 2144mm overall; comprising 1 no. ofdouble leaf swing doors size 1700 x 2100mm and 2 nos. of fixed glass panel each size 500 x 2100mm1,060.00 No 2F530.00glazing in 6mm thick clear glass with design sticker to door size 3080 x 2144mmTo CollectionJ 19826,496.00B3.12/7DOORSQty Unit Rate Item Description Amount B$SPECIALIST CONTRACTOR DESIGNED ALUMINIUM WORKS WINTEC / TECHNAL-TOPAZE / QINYA ST-10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ________________________________powder coated aluminium framed single swing door, completed with approved ironmongeries and other accessories as per manufacturer's detail and specification and Architect's approvalDoor type D96,580.00 No 10 A 658.00 aluminium works to door size 988 x 2144mm overall5,030.00 No 10B503.00glazing in 12mm thick tempered glass with design sticker to door size 988 x 2144mmWINTEC / TECHNAL-TOPAZE / QINYA ST10 or other equal and approved (Contractor to fill in the brand of material in the following space provided) ______________________________ powder coated aluminium louvre door, completed with approved ironmongeries and other accessories as per manufacturer's detail and specification and Architect's approvalDoor type D102,404.00 No 4 C 601.00 aluminium works to door size 988 x 2144mm overallGLAZING6mm Float glass; clearGlass and glazing to wood with wood beads; taking out, easing, adjusting and refixing beads (beads measured separately)224.00 No 56 D 4.00 to glazing opening 200 x 625mm in door (D4a)48.00 No 12 E 4.00 to glazing opening 200 x 625mm in door (D4)160.00 No 40 F 4.00 to glazing opening 200 x 625mm in door (D6a)6mm Georgian wired polished glass; clearGlass and glazing to wood with wood beads; taking out, easing, adjusting and refixing beads (beads measured separately)75.00 No 5 G 15.00 to glazing opening 150 x 600mm in door (D7a)260.00 No 4 H 65.00 to glazing opening 700mm x 600mm in door (D8)To CollectionJ 19814,781.00B3.12/8DOORSQty Unit Rate Item Description Amount B$INTERNAL PAINTINGPreparing; priming only backs of woodwork before fixingDoor frames, linings, architraves or other trims1,201.00 m 1,201 A 1.00 not exceeding 100mm girth2,102.00 m 1,051 B 2.00 100mm - 200mm girthNotesC The Contractor is to price this section of works based on any one of the brand of materials for spray painting stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of the materials shall be in accordance to manufacturer's recommendation.SKK Decolux / ICI DULUX / JOTUN or other equal and approved painting (Contractor to fill in the brand of material in the following space provided) Preparing; priming; applying one ________________________ undercoat; two finishing coats of ________________________ paint on wood work all as per manufacturer's specifications and colour to Superintending Officer's approvalDoor frames, linings, architraves and other trims3,603.00 m 1,201 D 3.00 100mm - 200mm girthSKK / ICI DULUX / JOTUN or other equal and approved painting (Contractor to fill in the brand of material in the following space provided) Preparing; sealing; applying two coats of___________________________ cement paint on gypsum or similar board surfaces all as per manufacturer's specifications and colour to Superintending Officer's approvalDoor frames, linings, architraves and other trims516.00 m 172 E 3.00 100mm - 200mm girthTo CollectionJ 1987,422.00B3.12/9DOORSQty Unit Rate Item Description Amount B$INTERNAL PAINTING SKK / ICI DULUX / JOTUN or other equal and approved painting (Contractor to fill in the brand of material in the following space provided) Preparing; thrice staining; bodying in; varnishing ____________________ stained finish on woodworkall as per manufacturer's specifications and colour to Superintending Officer's approvalDoors3,690.00 m2 410 A 9.00 generallyDoor frames, linings, architraves and other trims1,578.00 m 526 B 3.00 200mm - 300mm girthTo CollectionJ 1985,268.00B3.12/10DOORSQty Unit Rate Item Description Amount B$DOORS CollectionFrom Page B3.12/1 35,789.00From Page B3.12/2 33,470.00From Page B3.12/3 22,887.00From Page B3.12/4 10,094.00From Page B3.12/5From Page B3.12/6 26,496.00From Page B3.12/7 14,781.00From Page B3.12/8 7,422.00From Page B3.12/9 5,268.00To Bill No. 3 SummaryJ 198156,207.00B3.13/1Qty Unit Rate Item Description Amount B$INTERNAL WALL FINISHESFINISHINGSPlasterglassBeading105.00 m 15 A 7.00 20 x 100mmINTERNAL BEDS AND BACKINGSCement and sand (1:3)Screeded backings to walls5,784.00 m2 723 B 8.00 20mm thickINTERNAL INSITU FINISHINGSPlastering in cement and sand (1:3) gauged with plasticiser20mm To walls18,408.00 m2 2,301 C 8.00 generallyINTERNAL TILE, SLAB AND BLOCK FINISHINGSNotesD Porcelain homogenous tiles in this section is defined as ordinary porcelain homogenous tiles.E The Contractor is to price this section of works based on any one of the brand of materials for homogeneous tiles stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.MML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) __________________________ homogeneous glazed tiles; 300 x 300mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutWalls20,822.00 m2 718 F 29.00 generallyTo CollectionJ 19845,119.00B3.13/2INTERNAL WALL FINISHESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS NIRO GRANITE NICKELINE / MML / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) ___________________________________________ homogeneous tiles; 600 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutWalls235.00 m2 5 A 47.00 generallyINTERNAL SHEET FINISHINGS AND DRY LININGS12.5mm thick 'ELEPHANT' Echo Bloc R-1 or equal and approved acoustic wall with 6mm thick Gypsumboard backings; fixing in accordance to manufacturer's specification and Architect's approvalLinings; nailing with butt joints to 50 x 50mm timber framing at 600 x 600mm centres horizontally and vertically; supplying and fixing additional 50 x 50mm timber noggings to support board ends as required1,484.00 m2 53 B 28.00 walls6mm thick MDF board or other equal and approved wallboards; jointing and finishing to give a flush seamless surface ready for decorationLinings; nailing with butt joints to 50 x 50mm timber framing at 600 x 600mm centres horizontally and vertically; supplying and fixing additional 50 x 50mm timber noggings to support board ends as required800.00 m2 25 C 32.00 wallsTo CollectionJ 1982,519.00B3.13/3INTERNAL WALL FINISHESQty Unit Rate Item Description Amount B$INTERNAL PAINTINGNotesA The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The contractor is required to specify, initial and stamp chop the brand of painting (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Biofine Intermatt / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of material in the following space provided) Preparing; applying one coat_______________________sealer; two coats______________________ emulsion paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalPlastered surfaces9,204.00 m2 2,301 B 4.00 walls and columnsGypsum and similar board surfaces212.00 m2 53 C 4.00 wallsBeading15.00 m 15 D 1.00 100mm - 200mm girthSKK / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of material in the following space provided) Preparing; applying one coat_______________________sealer; two coats______________________ glossy spray paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalGypsum and similar board surfaces475.00 m2 25 E 19.00 wallsTo CollectionJ 1989,906.00B3.13/4INTERNAL WALL FINISHESQty Unit Rate Item Description Amount B$INTERNAL WALL FINISHES CollectionFrom Page B3.13/1 45,119.00From Page B3.13/2 2,519.00From Page B3.13/3 9,906.00To Bill No. 3 SummaryJ 19857,544.00B3.14/1Qty Unit Rate Item Description Amount B$INTERNAL FLOOR FINISHESFINISHINGSNyatohSkirtings5,400.00 m 600 A 9.00 120 x 16mm thickINTERNAL BEDS AND BACKINGSCement and sand (1:3)Screeded beds to floors15,966.00 m2 1,774 B 9.00 20mm thickScreeded backings to skirtings764.00 m 382 C 2.00 20mm thick x 100mm highWORK IN CONNECTION WITH WATERPROOFINGNotesD The Contractor is to price this section of works based on any one of the brand of materials for waterproofing stated in the item description. The contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.SIKATOP 107 / KEMSCREED BRUSHBOND / FOSROC BRUSHBOND or other equal and approved (Contractor to fill in the brand of material in the following space provided)_________________________ waterproofing; all in accordance with the manufacturer's printed instructionsMembrane to concrete surfaces under floor screeds666.00 m2 37 E 18.00 sub-base to floors; including upturn to wallsINTERNAL TILE, SLAB AND BLOCK FINISHINGSNotesF Porcelain homogenous tiles in this section is defined as ordinary porcelain homogenous tiles.To CollectionJ 19822,796.00B3.14/2INTERNAL FLOOR FINISHESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS Notes A The Contractor is to price this section of works based on any one of the brand of homogeneous tiles and laminated timber flooring stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of homogeneous tile and laminated timber flooring (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the homogeneous tiles and laminated timber flooring shall be in accordance to manufacturer's recommendation.MML (Marble Silkwinds) / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) porcelain homogeneous tiles in matt surface finish; 300 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring16,422.00 m2 391 B 42.00 generallyMML / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) porcelain homogeneous tiles; 100 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutSkirtings; projecting from wall finish2,674.00 m 382 C 7.00 100mm highTo CollectionJ 19819,096.00B3.14/3INTERNAL FLOOR FINISHESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS MML Posh'e (PP02 Bone) / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) porcelain homogeneous tiles in matt surface finish; 600 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring8,492.00 m2 193 A 44.00 generallyMML Posh'e (SP02 Bone) / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided) porcelain homogeneous tiles in polished finish; 600mm x 600mm x 8.5mm thick; white colour or other colour to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring4,872.00 m2 87 B 56.00 generallyMML Posh'e (PP01 Black) / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided)porcelain homogeneous tiles in polished finish; 300 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joint 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring3,248.00 m2 58 C 56.00 generallyTo CollectionJ 19816,612.00B3.14/4INTERNAL FLOOR FINISHESQty Unit Rate Item Description Amount B$INTERNAL TILE, SLAB AND BLOCK FINISHINGS ALOMI 8.3mm thick Heavy Duty Laminate Flooring with uniclick system and Aluminium Oxide Protective Coating including standard underlay / TATEX 11013 silver high density sponge or other equal and approved (Contractor to fill in the brand of material in the following space provided) laminated timber flooring; colour and pattern to Superintending Officer's approval; fixing with approved adhesive; secret nailing; sanding after layingFlooring1,900.00 m2 20 A 95.00 generallyFITTED CARPETINGNotesB The Contractor is to price this section of works based on any one of the brand of carpet stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation." HERITAGE ASPECT SQ / GOODRICH / FASTRACK"or other equal and approved (Contractor to fill in the brand of material in the following space provided) ____________________ tiled carpet; 500 x 500 x 5mm thick; colour and pattern to manufacturer's specification and Superintending Officer's approval; on screeded beds (measured separately)Carpeting; laying on and including supplying specified underlay24,480.00 m2 816 C 30.00 to floors; laid to pattern" HERITAGE DC10 Discovery / GOODRICH / FASTRACK"or other equal and approved (Contractor to fill in the brand of material in the following space provided) ____________________ rolled carpet with underlay; colour and pattern to manufacturer's specification and Superintending Officer's approval; on screeded beds (measured separately)Carpeting; laying on and including supplying specified underlay8,320.00 m2 208 D 40.00 to floors; laid to patternTo CollectionJ 19834,700.00B3.14/5INTERNAL FLOOR FINISHESQty Unit Rate Item Description Amount B$INTERNAL PAINTINGPreparing; priming only backs of woodwork before fixingSkirtings and the like900.00 m 600 A 1.50 100mm - 200mm girthNotesB The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The contractor is required to specify, initial and stamp chop the brand of painting (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Decolux / ICI DULUX / JOTUN or other equal and approved painting (Contractor to fill in the brand of material in the following space provided) Preparing; priming; applying one ________________________ undercoat; two finishing coats of ________________________ paint on wood work all as per manufacturer's specifications and colour to Superintending Officer's approvalSkirtings and the like1,800.00 m 600 C 3.00 100mm - 200mm girthTo CollectionJ 1982,700.00B3.14/6INTERNAL FLOOR FINISHESQty Unit Rate Item Description Amount B$INTERNAL FLOOR FINISHES CollectionFrom Page B3.14/1 22,796.00From Page B3.14/2 19,096.00From Page B3.14/3 16,612.00From Page B3.14/4 34,700.00From Page B3.14/5 2,700.00To Bill No. 3 SummaryJ 19895,904.00B3.15/1Qty Unit Rate Item Description Amount B$INTERNAL CEILING FINISHESINTERNAL SHEET FINISHINGS AND DRY LININGSNotesA Rates for suspended ceiling systems are deemed to be include raking and circular cutting, forming openings for fittings, diffusers, light fittings, speakers and the like, small areas, narrow widths and any purpose made trim at ceiling edgesB Rates for ceiling are deemed to include for hangers of any length and fixing hangers to concrete, brickwork, timber or structural steelwork9mm thick gypsum boards; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit3,780.00 m2 210 C 18.00 ceilings; to finish not exceeding 3.50m above floor1,782.00 m2 99D18.00sloping ceilings; to finish not exceeding 3.50m above floor3,042.00 m2 169 E 18.00 ceiling bulkheads; not exceeding 3.50m above floor9mm thick plaster glass; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit5,320.00 m2 190F28.00sloping ceilings; to finish not exceeding 3.50m above floor210.00 m2 6G35.00curved ceilings; to finish not exceeding 3.50m above floor31,724.00 m2 1,133 H 28.00 ceiling bulkheads; not exceeding 3.50m above floor1,015.00 m2 29I35.00curved ceilings; suspended average 1500mm approximately below structural soffits; to finish 5.00m - 6.50m above floorTo CollectionJ 19846,873.00B3.15/2INTERNAL CEILING FINISHESQty Unit Rate Item Description Amount B$INTERNAL SHEET FINISHINGS AND DRY LININGS 6mm thick fibre cement boards; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit1,702.00 m2 74 A 23.00 ceilings; to finish not exceeding 3.50m above floor3,220.00 m2 140 B 23.00 ceiling bulkheads; not exceeding 3.50m above floor6mm thick MDF boards; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit1,216.00 m2 38C32.00curved ceilings; to finish not exceeding 3.50m above floor1,248.00 m2 39 D 32.00 ceiling bulkheads; not exceeding 3.50m above floor6mm thick MDF boards; including aluminium support system complete with hangers, edge trim and necessary accessories; jointing and finishing to give a flush seamless surface ready for decoration; all as shown in Architect's Drawings No. AGA/034/09/A31/5Steps ceiling at Info Counter320.00 m2 10 E 32.00 ceiling bulkheads; not exceeding 3.50m above floor6mm thick MDF boards; including aluminium support system complete with hangers, edge trim and necessary accessories; including 6mm thick bronze mirror glass; jointing and finishing to give a flush seamless surface ready for decoration; all as shown in Architect's Drawings No. AGA/034/09/A31Steps ceiling at lecture theatre entry1,056.00 m2 33 F 32.00 ceiling bulkheads; not exceeding 3.50m above floorTo CollectionJ 1988,762.00B3.15/3INTERNAL CEILING FINISHESQty Unit Rate Item Description Amount B$INTERNAL SHEET FINISHINGS AND DRY LININGS 12.5mm thick 'ELEPHANT' Echo Bloc R-1 or equal and approved acoustic ceiling with 3mm thick plywood backings; fixing in accordance to manufacturer's specification and Architect's approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit1,932.00 m2 69 A 28.00 ceilings; to finish not exceeding 3.50m above floorDecorative plasterglass cornice to Architect approvalCornices340.00 m 85 B 4.00 20mm thick x 50mm high1,984.00 m 496 C 4.00 25mm thick x 50mm high624.00 m 156 D 4.00 40mm thick x 50mm high216.00 m 54 E 4.00 45mm thick x 50mm high108.00 m 27 F 4.00 50mm thick x 50mm high16.00 m 4 G 4.00 50mm thick x 75mm high88.00 m 22 H 4.00 75mm thick x 75mm high68.00 m 17 I 4.00 45mm thick x 90mm high28.00 m 4 J 7.00 100mm thick x 100mm highINTERNAL SUSPENDED CEILINGS AND SUPPORT WORKNotesK The Contractor is to price this section of works based on any one of the brand of materials for suspended ceilings stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.To CollectionJ 1985,404.00B3.15/4INTERNAL CEILING FINISHESQty Unit Rate Item Description Amount B$INTERNAL SUSPENDED CEILINGS AND SUPPORT WORK " OWA"'Finetta' Exposed Square Edge / USG RADAR Clima Plus / OWACOUSTIC constellation S3 square edge or equal and approved (Contractor to fill in the brand of material in the following space provided) __________________________________________________mineral fibre board suspended ceiling system complete with hangers and necessary accessories in accordance with manufacturer's instruction and Architect's approval15mm Thick linings; 600 x 600mm; including exposed metal support system6,425.00 m2 257 A 25.00 not exceeding 3.50m above floor" OWA"'Spectra-Satino' or other equal and approved acrylic glass tiles suspended ceiling system complete with hangers and necessary accessories in accordance with manufacturer's instruction and Architect's approval3mm Thick linings; 600 x 600mm; including beveled edge support system1,050.00 m2 5B210.00curved ceilings; to finish not exceeding 3.50m above floor4mm thick approved acrylic sheet suspended ceiling system complete with hangers and necessary accessories in accordance with manufacturer's instruction and Architect's approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit2,925.00 m2 5 C 585.00 ceilings; to finish not exceeding 3.50m above floorLinings; including aluminium support system suspended approximately 1000mm below concrete soffit2,925.00 m2 5 D 585.00 sloping ceilings; to finish 3.50m - 5.00m above floor6mm thick approved acrylic sheet suspended ceiling system complete with hangers and necessary accessories in accordance with manufacturer's instruction and Architect's approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit6,230.00 m2 10 E 623.00 ceilings; to finish not exceeding 3.50m above floorTo CollectionJ 19819,555.00B3.15/5INTERNAL CEILING FINISHESQty Unit Rate Item Description Amount B$INTERNAL PAINTINGNotesA The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The contractor is required to specify, initial and stamp chop the brand of painting (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Biofine Intermatt / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of material in the following space provided) Preparing; applying one coat_______________________sealer; two coats______________________ emulsion paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalGypsum and similar board surfaces6,944.00 m2 1,736 B 4.00 ceilings and beams; not exceeding 3.50m high116.00 m2 29 C 4.00 ceilings and beams; 5m - 6.5m highCornices and the like581.00 m 581 D 1.00 not exceeding 100mm girth568.00 m 284 E 2.00 100mm - 200mm girthSKK / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of material in the following space provided) Preparing; applying one coat_______________________sealer; two coats______________________ glossy spray paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalGypsum and similar board surfaces2,280.00 m2 120 F 19.00 ceilings and beams; not exceeding 3.50m highTo CollectionJ 19810,489.00B3.15/6INTERNAL CEILING FINISHESQty Unit Rate Item Description Amount B$INTERNAL CEILING FINISHES CollectionFrom Page B3.15/1 46,873.00From Page B3.15/2 8,762.00From Page B3.15/3 5,404.00From Page B3.15/4 19,555.00From Page B3.15/5 10,489.00To Bill No. 3 SummaryJ 19891,083.00B3.16/1Qty Unit Rate Item Description Amount B$EXTERNAL WALL FINISHESEXTERNAL INSITU FINISHINGSPlastering in cement and sand (1:3) gauged with plasticiser20mm To walls14,728.00 m2 1,841 A 8.00 generallyForming groove lines in plastered wall18.00 m 6 B 3.00 20mm wide x 6mm deep2,406.00 m 401 C 6.00 20mm wide x 12mm deepEXTERNAL PAINTINGNotesD The Contractor is to price this section of works based on any one of the brand of painting stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Application of painting shall be in accordance to manufacturer's recommendation.SKK Biofine Satin / ICI DULUX / JOTUN or other equal and approved (Contractor to fill in the brand of material in the following space provided) Preparing; applying one coat_____________________________sealer; two coats________________________________emulsion paint in accordance to manufacturer's printed instructions; colour and pattern to Architect's approvalPlastered surfaces7,432.00 m2 1,858 E 4.00 walls and columnsTo CollectionJ 19824,584.00B3.16/2EXTERNAL WALL FINISHESQty Unit Rate Item Description Amount B$EXTERNAL WALL FINISHES CollectionFrom Page B3.16/1 24,584.00To Bill No. 3 SummaryJ 19824,584.00B3.17/1Qty Unit Rate Item Description Amount B$EXTERNAL FLOOR & CEILING FINISHESEXTERNAL BEDS AND BACKINGSCement and sand (1:3)Screeded beds to floors2,826.00 m2 314 A 9.00 20mm thickEXTERNAL TILE, SLAB AND BLOCK FINISHINGSNotesB Porcelain homogenous tiles in this section is defined as ordinary porcelain homogenous tiles.C The Contractor is to price this section of works based on any one of the brand of materials for homogeneous tiles stated in the item description. The Contractor is required to specify, initial and stamp chop the brand of material (upon which his rates and prices are based on) for the particular item of works in the space provided. Fixing of the materials shall be in accordance to manufacturer's recommendation.MML Starcrest / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided)porcelain homogeneous tiles; 600 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring3,388.00 m2 77 D 44.00 generallyMML Posh'e / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided)porcelain homogeneous tiles in rough finish; 600 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring5,104.00 m2 116 E 44.00 generallyTo CollectionJ 19811,318.00B3.17/2EXTERNAL FLOOR & CEILING FINISHESQty Unit Rate Item Description Amount B$EXTERNAL TILE, SLAB AND BLOCK FINISHINGS MML Posh'e (SP04 White) / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided)porcelain homogeneous tiles; 600 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring1,452.00 m2 33 A 44.00 generallyMML Starcrest / SEACERA / KIMGRES or other equal and approved (Contractor to fill in the brand of material in the following space provided)porcelain homogeneous tiles; 300 x 600mm x 8.5mm thick; colour and pattern to Superintending Officer's approval; laying with joints 3mm wide; fixing with Dribond (Kemgrip) or other equal and approved adhesive; on screeded beds or backings (measured separately); pointing using matching colour groutFlooring3,471.00 m2 89 B 39.00 generallyEXTERNAL SHEET FINISHINGS AND DRY LININGSNotesC Rates for suspended ceiling systems are deemed to be include raking and circular cutting, forming openings for fittings, diffusers, light fittings, speakers and the like, small areas, narrow widths and any purpose made trim at ceiling edgesD Rates for ceiling are deemed to include for hangers of any length and fixing hangers to concrete, brickwork, timber or structural steelworkTo CollectionJ 1984,923.00B3.17/3EXTERNAL FLOOR & CEILING FINISHESQty Unit Rate Item Description Amount B$EXTERNAL SHEET FINISHINGS AND DRY LININGS 9mm thick gypsum boards; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit396.00 m2 22A18.00sloping ceilings; to finish not exceeding 3.50m above floor9mm thick plaster glass; jointing and finishing to give a flush seamless surface ready for decoration; all as per Architect's drawings and approvalLinings; including aluminium support system suspended approximately 500mm below concrete soffit3,180.00 m2 106 B 30.00 sloping ceilings; to finish 3.50m - 5.00m above floor2,820.00 m2 94 C 30.00 sloping ceilings; to finish 6.50m -