JACKS - Burson Auto · PDF fileThe Liftech Airbag Jacks are pneumatic portable jacks respectively with two and three stages. These jacks are technically superior to what is currently

JACKS

72

K12051

Kincrome Hydraulic Bottle JackSafe Working Load: 4,000KgCollapsable handle for easy storage.

Specifications: • Weight: 4.0Kg • Height Open: 330mm • Height Closed: 170mm • Base Area: 169cm2 • Hydraulic Lift: 100mm • Screw Extension: 60mm • Complies with Australian

Standards AS/NZ 2693 - 2007

K12050




K12053


Specifications: • Weight: 6.0Kg • Height Open: 400mm • Height Closed: 200mm • Base Area: 136.1cm2 • Hydraulic Lift: 125mm • Screw Extension: 70mm • Complies with Australian


K12052




K12055




K12054




K12057




K12056




JACKS

73

K12059

Kincrome Squat Bottle JackSafe Working Load: 20,000KgCollapsable handle for easy storage.



K12058

Kincrome Squat Bottle JackSafe Working Load: 10,000KgCollapsable handle for easy storage.



Masada Bottle Jacks• Rigidly adheres to traditional manufacturing standards. • Masada jacks boast high quality, all welded construction, drop forged steel base. • Worldwide reputation for reliability. • Full serviceability • Wide range of capacities, ranging from 2,000Kg up to 100,000Kg. • Apart from the standard bottle jack design MASADA also have available, • Two stage telescopic jacks designed to give high lift from a low closed height. • Special purpose jacks, ranging from Toe jacks ideal for lifting loads with a low minimum jacking clearance to inverted press jacks

and mini bottle jacks. • All standard and short Masada jacks are tested to AS/NZS 2693:2003.

Model Part No.Working

Load Limit

Closed Height

LiftExtension

Screw Height

Maximum Height

Base Area Weight

Standard Type

MS-2G 2,000Kg 180mm 115mm 50mm 345mm 142mmx95mm 2.4Kg

MS-3G 3,000Kg 190mm 115mm 60mm 365mm 142mmx95mm 2.7Kg

MS-5YG 5,000Kg 200mm 120mm 70mm 390mm 142mmx95mm 3.5Kg

MH-7 7,000Kg 200mm 120mm 70mm 390mm 151mmx90mm 5.5Kg



MH-20 20,000Kg 270mm 160mm N/A 430mm 182mmx128mm 12.2Kg

Industrial type

MH-30Y 30,000Kg 280mm 160mm N/A 440mm 192mmx142mm 18.5Kg

MH-50Y 50,000Kg 305mm 170mm N/A 475mm 237mmx188mm 37Kg

MH-100Y 100,000Kg 305mm 145mm N/A 450mm 318mmx265mm 93Kg

Short Type

MS-2SG 2,000Kg 150mm 85mm 50mm 285mm 142mmx95mm 2.2Kg

MHB-10 10,000Kg 170mm 95mm 75mm 340mm 166mmx106mm 6.4Kg

MHB-15 15,000Kg 170mm 90mm 70mm 330mm 180mmx118mm 8Kg

MHB-20 20,000Kg 180mm 85mm 40mm 305mm 182mmx128mm 10.2Kg

Industrial MHB-30Y 30,000Kg 180mm 80mm 260mm 192mmx142mm 13.9Kg

Two Stage Telescopic Type

HPD-4NG 2,000Kg 150mm 160mm 30mm 340mm 110mmx130mm 4.3Kg

HFD-10F 10,000Kg 160mm 100mm N/A 260mm 118mmx180mm 8.7Kg

HFD-10 10,000Kg 170mm 180mm 70mm 420mm 118mmx180mm 8.7Kg

JACKS

74

LT150TLP

Liftech Turbo Lift Garage JackTurbo lift to load capability. Extended low entry that does not compromise lift height Complies with Australian Standards AS/NZS 2615:2004.

• Working load limit: 1,500kg• Closed height: 68mm • Lift: 432mm • Max. height: 500mm• Max. frame height: 145mm• Size: 710(L) x 390(W) mm• Net weight: 43kg

LT200TJ

Liftech Turbo Lift JackTurbo lift to load, universal joint release for trouble free operation. Flared frame for extra strength. Complies to Australian Standards AS/NZS 2615-2004

• Working load limit: 2,000kg• Closed height: 139mm • Lift: 340mm • Max. height: 470mm• Max. frame height: 162mm• Size: 340(W) mm• Net weight: 32kg

YM200FUN

Liftech Low Clearance JackFeatures:

Flared frame for extra strength. Universal joint release for trouble free operation Nylon wheels. Complies to Australian Standards AS/NZS 2615-2004.

• Working load limit: 2,000kg • Closed height: 90mm• Lift: 410mm • Max. height: 500mm • Max. frame height: 160mm • Size: 400(W) mm• Net weight: 44kg

LFJ5000

Liftech Forklift JackThis jack is designed for the servicing of forklift trucks and machinery. Two alternate lifting positions allowing a wider range of lifting capabilities, i.e. forklifts and machinery, also two saddle positions on the toe to suit battery or internal combustion forklift trucks. Sturdy construction with four wheels for easy maneuverability.

• Working load limit: 5,000kg• Closed height: 65mm • Lift: 432mm • Maximum height (toe): 430mm • Closed height (top of RAM): 430mm • Maximum height (top of RAM): 760mm • Overall length: 770mm • Net weight: 46.5kg

LTABJ2 / LTABJ3 / LTABJ2H

Liftech Airbag JacksThe Liftech Airbag Jacks are pneumatic portable jacks respectively with two and three stages. These jacks are technically superior to what is currently in the market. They have a telescopic stabilizer and are characterized by reduced dimensions and by a solid and reliable structure. Both jacks are equipped with a safety valve and a stroke limiting device. Rubber head cap comes as a standard extra. LTABJ2H comes with a two position lock handle for ease of maneuverability. Made in Italy.

Part NumberWorking

Load Limit.Closed Height

Maximum Height

LTABJ2 2,000kg 163mm 326mm

LTABJ3 2,000kg 220mm 490mm

LTABJ2H 2,000kg 163mm 326mm

JACKS

75

LT Series

Liftech Air Over Hydraulic Truck JacksA jack for all types of heavy vehicles. These high quality European jacks are designed to service very low profile buses and trucks. Operated by an air hydraulic pump. When released the rams retract automatically at a controlled speed. These jacks conform to the Machine Directive 98/37/CE and are type-approved according to the European Standard EN1494. Each model has 3 height adaptors available – 120mm, 70mm, 10mm. Made in Italy.

Part NumberWorking

Air PressureNumber

of StagesWorking Load

Limit. per StageClosed Height

Height per stage

Maximum Height w/o adaptors

3 Adaptors Height’s

Net Weight

LT215-N 8-12 bar 2 30,000/15,000Kg 150mm 72/78mm 300mm 120/70/10mm 39Kg



LT318-N 8-12 bar 360,000/30,000Kg

18,000Kg180mm

75/72 81mm

408mm 120/70/10mm 69Kg

LT415-N 8-12 bar 470,000/43,000Kg 23,000/13,000Kg

150mm60/68

56/66mm400mm 120/70/10mm 74Kg

YM500D / YM1000D

Liftech Heavy Duty Garage JackQuick and Safe operation, with an mechanical quick lift device allowing you to raise the jack saddle up to the loading point very quickly with one movement of the jack handle. Both the YMA500D and YMA1000D can be operated manually without air. Light and Compact design facilitates an easy and efficient operation even in a limited area. Rear wheels (casters) fixed in a location as to balance the total weight of the jack and enable the operator to move the jack in any direction easily by stepping on the foot plate provided on the rear end of the jack. Built in automatic safety valve prevents overloading Frame designed for strength and safety. Service and parts back-up Australia wide. Sold in Australia for over 30 years.

Part NumberWorking

Load Limit.Closed Height

LiftMaximum

HeightOverall Length

Overall Width

Net Weight

YM500D YMA500D

5,000Kg 150mm 536mm 686mm 1575mm 428mm 110Kg

YM1000D YMA1000D

10,000Kg 160mm 526mm 686mm 1740mm 528mm 150Kg

76

YHUJ1500CN

Liftech Transmission Jack(under vehicle)The YHUJ1500CN has a wide chassis with an open front providing a wider opening for saddle and transmission to come lower to the ground for easy removal.

Features include: Efficient load distribution and stability; easy access to saddle tilt knobs; fully adjustable universal saddle with adjustable arms to position the transmission; heavy duty chain with convenient chain tensioner secures load to saddle; full 360o rotating handle operates in any position; four full-swivel ball bearing caster wheels for easy positioning.

Working Load Limit: 1,500kgClosed Height: 200mmMaximum Height: 910mm

YCJ300

Liftech Clutch JackSpecifically designed to lift in and out clutches and flywheels without the physical danger of carrying out the job without mechanical assistance. Special input shafts in the most popular sizes makes for easy removal and replacement of clutches and flywheels of most models.

Working Load Limit: 150kgClosed Height: 280mmMaximum Height: 960mm

YHMJ450TWC

Liftech Transmission Jack(under hoist)Telescopic two-stage hydraulics for greater lifting range, precise load control and rapid lift. Convenient foot operated pump system for raising and lowering allows operator to have both hands free to position and align cradle with transmission. Wide base with four swivel ball bearing rubber wheels provides better stability and easy maneuverability. Two way tilt cradle, safety chain fitted. Built to comply with work place safety requirements.

Working Load Limit: 450kg Closed Height: 825mm Maximum Height: 1841mm

60020B

Liftech Transmission Jack(under vehicle)This under vehicle transmission jack has a full 360o rotating pump handle that allows the operator to use the jack in any position with either hand, by-pass system prevents over extension of ram stroke. Saddle has four way tilt adjustment with adjustable rails and safety chain.

Working Load Limit: 1,000kgClosed Height: 197mmMaximum Height: 740mm

JACKS

755A

Liftech Under HoistTransmission JackFoot pump to raise the jack and a foot release to lower. Two way tilt saddle, with safety chain to secure the transmission.Parts and service available Australia wide.

• Capacity: 500 kg. • Maximum Height: 1780 mm • Minimum Height: 1075 mm

77

JACKS

2003

Tradequip Air Hydraulic Jack• 20,000kg safe working capacity• Complete with 4 inter-changeable saddles• Hydraulic lift: 120mm• Adjustable height: 80mm• Minimum height: 230mm• Maximum height: 430mm• Overall dimensions:

500(L) x 1275(H) x 320(W) mm• Nett weight: 41.4kg

NOTE: Use hydraulic fluid ISO68

NAS/NZS: 2693:1993 VFN02-4200/1

RWP12M / RWP20

RitchTM HydraulicPressFabricated in Australia from high quality steel. Powder coated for durability. Powered by a top quality inverted jack. Fitted with a sliding head assembly. Pump action across press. Knurled release knob. Supplied with bed blocks. Screw down extension on ram. Wide easy adjustable bed. (Also available custom built presses to your specifications)Working Load Limit: 12,000kg / 20,000kg

RMP150

RitchTM Coil SpringCompressorThe coil spring compressor is air operated and uses a clear hardened Perspex guard to protect from top hats or springs becoming projectiles around the workshop. The strut assembly is held in a vice like clamp. The compression of the spring is achieved by using powerful pneumatic cylinder and a specially designed pivoting arm with adjustable sliding fingers to hold down the top hat and spring whilst the strut is being released.

LT1108

Liftech - 2500Kg Portable Mid-Rise LiftAutomatic double safety locks system with air lock release. 240V 110mm drive over height. Maximum lift 995mm, Rubber riser blocks. Portable control console. Easy to relocate, Wheel kit with towing handle.

MOBILE72WB

Stenhoj ElectroHydraulic MobileHoist7,200kg per post.Battery operated allows the hoist to be used indoors or outdoors.Wireless inter-post communicationReliable maintenance free hydraulic drive.Maximum safety-Hydraulic check valve and mechanical locking systemOperation from any postAdjustable forks to suit different size wheels.

78

2002

Tradequip TelescopicTransmission Jack• 500kg safe working capacity• Complete with safety chains• 2 stage lift• 2 way tilt• Maximum height: 1850mm• Base dimensions: 810 x 810mm• Minimum height: 870mm• Nett weight: 84kg

AS/NZS: 2693:1993 VFN02-4104/2

N

1054

Tradequip Vehicle PositioningJack - 450Kg Capacity• Steel Construction with Metal Rollers• Quality 100mm Swivel Castors• Maximum Tyre Width: 210mm• Nett Weight: 38kg (pair)• Maximum Length: 850mm

2052

Tradequip 500Kg TransmissionJack with Double Tilt Head• 500kg Safe Working Capacity• Complete with Safety Chains• Saddle Forward Tilt: 23º• Saddle Backward Tilt: 16º• Saddle Lateral Tilt: 7º• Maximum Height: 1860mm• Minimum Height: 1110mm• Stroke: 905mm• Nett Weight: 63kg

JACKS

2800

Tradequip Heavy Duty High Lift & Low Profile Jack• Lifting Capacity: 2000kg • Minimum Height: 120mm• Maximum Height: 620mm• Nett Weight: 67kg

2801

Tradequip Heavy Duty Garage Jack• 2000kg Safe Working Capacity• Professional Quality• Low Profile • Minimum Height: 110mm• Maximum Height: 510mm• Nett Weight: 47kg

2802

Tradequip Full AluminiumTrolley Jack• 1600KG Working load limit• Professional quality• Low profile with dual pump (6.5 strokes to full height)• Minimum height: 95mm• Maximum height: 490mm• Overall length: 670mm• Overall width: 320mm• 26kgs

Documents

JACKS - Burson Auto · PDF fileThe Liftech Airbag Jacks are pneumatic portable jacks respectively with two and three stages. These jacks are technically superior to what is currently