JC Equipments Pvt. Ltd Heat Exchanger Manufacturers

Off Ph : +91 422 2679787 , +91 422 2670868

Tele Fax : +91 422 2679797

http://www.heatexchangersindia.com

Administrative Office:

6 J/2, Palaniyappa Layout,

Madukkarai Road, Near Old Dinamalar Office,

Sidco (PO), Coimbatore - 641 021.

Tamilnadu. INDIA

Plate Heat Exchangers Manufacturers INDIA

We are the leading manufacturers of Plate heat exchanger in India.

We manufacture and supply highest quality range of plate heat exchanger using the most advanced technology for a wide series of heat transfer applications used in various industries such as chemical industry, offshore, oil and gas, petrochemicals power plants, pulp and paper, steel, zinc and aluminium, sugar, vegetable oil, breweries / distilleries, dairy / beverages and others.

The difference lies at plate design, sealing technology, capacity range, product range etc. We always continue to improve our Plate heat exchanger to give total customer's satisfaction.

JC Equipments Pvt. Ltd Heat Exchanger Manufacturers

Plate Heat Exchangers Manufacturers INDIA

Plate Heat Exchanger Features

•High heat transfer coefficients•Optimized heat recovery•Compact constructions•No mixing of product•Flexibility to change plate arrangement and to add / remove plate•Easy maintenance and suitable for CIP, plate pack easily accessible

Plate Heat Exchanger

A plate type heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates.

Plate Heat Exchangers Manufacturers INDIA

This facilitates the transfer of heat, and greatly increases the speed of the temperature change. It is not as common to see plate heat exchangers because they need well-sealed gaskets to prevent the fluids from escaping, although modern manufacturing processes have made them feasible.

The concept behind a plate heat exchanger is the use of pipes or other containment vessels to heat or cool one fluid by transferring heat between it and another fluid. In most cases, the exchanger consists of a coiled pipe containing one fluid that passes through a chamber containing another fluid.

The walls of the pipe are usually made of metal, or another substance with a high thermal conductivity, to facilitate the interchange, whereas the outer casing of the larger chamber is made of a plastic or coated with thermal insulation, to discourage heat from escaping from the exchanger. The plate heat exchanger (PHE) s was invented by Dr Richard Seligman in 1923 and revolutionized methods of indirect heating and cooling of fluids.

Plate Heat Exchangers Manufacturers INDIA

Plate type heat exchanger one is composed of multiple, thin, slightly-separated plates that have very large surface areas and fluid flow passages for heat transfer. This stacked-plate arrangement can be more effective, in a given space, than the shell and tube heat exchanger.

Advances in gasket and brazing technology have made the plate type heat exchanger increasingly practical. In HVAC applications, large heat exchangers of this type are called plate-and-frame; when used in open loops, these heat exchangers are normally of the gasket type to allow periodic disassembly, cleaning, and inspection. There are many types of permanently-bonded plate heat exchangers, such as dip-brazed and vacuum-brazed plate varieties, and they are often specified for closed-loop applications such as refrigeration.

Plate heat exchangers also differ in the types of plates that are used, and in the configurations of those plates. Some plates may be stamped with "chevron" or other patterns, where others may have machined fins and/or grooves.

Plate Heat Exchangers Manufacturers INDIA

The plate heat exchanger sare available in herring bone, free flow and semi welded construction and depending on application respective plates are selected.

Plate heat exchangers - Bolted design (plate and frame)

Heat transfer plates are characterized by optimum embossing resulting in high heat transfer coefficients. This permits low-cost and optimum adoption to the respective application conditions Our product range includes single-pass and multi-pass plate heat exchangers with heat exchange surface up to 1500 m².

Plate Heat Exchanger Technical data: heat exchange surface per plate: 0,04 - 2,50 m²max. design pressure: 25 barmax. design temperature: 170°C

Plate Heat Exchangers Manufacturers INDIA

Plate Heat Exchanger Safety:

Our plates are provided with double gaskets at the inlet and outlet which prevent mixing of the two media. If designed as safety heat exchanger, double plates are provided with a special sealing system.Plate material: standard: stainless steel 1.4301/AISI 304, 1.4401/AISI 316optionally: 1.4539, 254 SMO, titanium

Gasket material: NBR (nitrile-rubber)EPDM (ethylene-propylene-rubber)Viton (fluorine-rubber)Further materials on request

Plate Heat Exchangers Manufacturers INDIA

Special series: •Safety heat exchangers (FPSS)•Stainless steel design for food and FDA applications•Compact double PHE-units including cocks and valves•Design with welded cassettes (FPG) Click the below links for more information about the Plate Heat ExchangerPlate Frame Heat Exchanger ApplicationPlate Frame Heat Exchanger CleaningPlate and Frame Heat Exchangers AnimationPlate and Frame Heat Exchanger ApproachPlate finned type Heat ExchangerBrazed Plate Heat ExchangersPlate Heat Exchanger Videos