Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
JCB Electromecánica
Narcís Clavell
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
JCB: Profile and Areas of Expertise
– Electromechanical engineering company established in 1999 in Girona, Spain
– Focus on customized industrial solutions
– Signal processing and instrumentation
– Piezoelectric sensors and transducers
– Optical sensors and spectroscopy
– Wireless communications
– Process engineering
– Bought in 2006 by CRIC to become a business incubator for start-ups
JCB Experience in FP7 Projects: R4SME
DEVELOPMENT OF A FAST AND RELIABLE FRYING OIL/FAT SENSOR FOR
THE FOOD SERVICE INDUSTRY
(OILFAT)
During frying, the frying oil undergoes hundreds of
chemical reactions giving rise to about 400 various
chemical compounds. Many of the degradation products
formed are toxic to human health. Therefore, frying oils
should be discarded when they have been used for a
certain period of time.
This project developed an on-line frying oil/fat sensor
which measures the quality of frying oils/fats and
determines the time to discard the oil/fat.
JCB Experience in FP7 Projects: R4SMEOILFAT achievements
Viscosity proved to be an adequate method of differentiating between
acceptable and unacceptable frying media. A sensor was developed based
on viscosity.
JCB Experience in FP7 Projects: R4SME
DEVELOPMENT OF AN ULTRASONIC RHEOLOGICAL SENSOR FOR NON-
INVASIVE AND NON-DESTRUCTIVE EVALUATION OF DOUGH
(RHEODOUGH)
The objective of this project was to provide SME millers with
a rapid means of detecting major flour defects and poor
dough quality.
A non-invasive, non-destructive sensor was developed using
ultrasound technology.
Dough waste was reduced by at least 80% and the
requirement for skilled operators for manual assessment of
dough was minimised.
JCB Experience in FP7 Projects: R4SME
RHEODOUGH achievements
The product is currently being
commersialised
JCB Experience in FP7 Projects: R4SME
LOW COST WIRELESS METROPOLITAN NETWORK LOCATION AND
CITIZEN SERVICES
(CITYBEE)
CityBee is a metropolitan network focused
on providing various services to citizens.
CityBee is based on a ZigBee wireless technology.
JCB patented a Voice-Over-Zigbee Technology
Some of the different services that CityBee offers:
•Location Service
•Emergency Service
•Information Service
•Message Service
JCB Experience in FP7 Projects: R4SME
Q-MEAT
HELPING EU PROCESSORS BECOME COMPETITIVE USING AUTOMATED
AND NON-CONTACT PIGMEAT PIECE QUALITY CLASSIFICATION
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
LENZ INSTRUMENTS – A start-up company (2011)
offering products and services for industrial monitoring
applications, particularly targeted to the food industry
Starting commercialization of fat analyzers for meat
pieces, based on inductive sensor technologies.
http://www.lenz-instruments.com
JCB is committed to promoting market uptake of project results
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
FP7– Research for the Benefit of SMEs
EPISOS
Objectives:
Epilepsy affects about 50 million people worldwide and 6 million in Europe.
In order to reduce the number of deaths caused by absence of aid during
tonic-clonic epileptic seizures, it is very important to continuously monitor
the epileptic patient’s state.
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
FP7– Research for the Benefit of SMEs
EPISOS
The EpiSOS system is an intelligent bracelet that will allow detection of tonic-
clonic epilectic seizures.
The system integrates the following devices:
1. a monitoring device to evaluate an epileptic event;
2. a sensor for detecting patient falls and seizures;
3. a Bluetooth module to communicate with a mobile phone.
In the event of a seizure, the device will send a signal to a smartphone
that will notify a patient’s relative or caretaker with the coordinates of
the patient by SMS.
To determine the patient’s location, both the GPS and GSM modules of
the smartphone could be used.
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
Consortium - profile of known partners
No Partner Name Type Country Role in the Project
01 CRIC RTD SpainProject coordinator,
Instrumentation and software
02 UPC RTD Spain Sensor design
03 Högskolan i Borås RTD Sweden Bracelet design
04 Akern S.R.L SME ItalyInstrumentation and
West European country distribution
05 JCB SME Spain System integration
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
Consortium - required partners
No Expertise Type Country Role in the project
01 SME Textile electrodes design
02 SME Printed electronics
03 SME East European country distributor
TurKey Enabling Technologies 2012
25 May 2012 – Istanbul
JCB Electromecánica
Narcís Clavell
www.jcb-sl.com
+34 932049922