3
Joshua Chambers 11/4 Pine Street, Randwick, NSW 2031 Phone: 0451 653 839 E-Mail: [email protected] Objective My objective is to obtain a graduate engineering position where I can use and develop my engineering and critical thinking skills. I am seeking interesting and challenging engineering work in an energetic and professional working environment that also provides opportunities to continue my professional and academic development. Education Bachelor of Engineering (Chemical) (WAM 82.00) 2013 - 2015 University of New South Wales, Kensington, NSW Bachelor of Engineering (1 st Year – Part Time) 2011 - 2012 University of Wollongong, Wollongong, NSW Higher School Certificate (ATAR 95.35) 2010 Avondale School, Cooranbong, NSW Professional Experience Chemical Engineering Cadet January 2011 - Present BlueScope Steel - Port Kembla Steelworks (PKSW), NSW Gas Processing Operations (Nov 2014 – Feb 2015) Developed and presented a re-commissioning scope for plant equipment in an effort to limit ongoing maintenance costs and promote plant efficiency. Designed and initiated the implementation of a continuous overflow system to improve the safety of current operating practices. Hot Mills Engineering (Nov 2013 – Feb 2014) Developed 2 nd Cycle Energy Efficiency Opportunities (EEO) reports for both the Hot Strip Mill and Plate Mill to meet Federal Government requirements. This involved assessing current plant efficiency against previous plant efficiency, and performing meetings with key personnel to identify opportunities for improvements. Findings were presented to managers and other key personnel. Energy Services Operations (Jul 2012 – Feb 2013) Safely performed isolations of equipment and supervised work being performed to ensure a safe atmosphere was maintained.

JChambers CV

Embed Size (px)

Citation preview

Page 1: JChambers CV

Joshua Chambers11/4 Pine Street, Randwick, NSW 2031Phone: 0451 653 839 E-Mail: [email protected]

Objective

My objective is to obtain a graduate engineering position where I can use and develop my engineering and critical thinking skills. I am seeking interesting and challenging engineering work in an energetic and professional working environment that also provides opportunities to continue my professional and academic development.

Education

2013 - 2015

University of New South Wales, Kensington, NSW

2011 - 2012

University of Wollongong, Wollongong, NSW

2010

Avondale School, Cooranbong, NSW

Professional Experience

January 2011 - Present

BlueScope Steel - Port Kembla Steelworks (PKSW), NSW

Gas Processing Operations (Nov 2014 – Feb 2015) Developed and presented a re-commissioning scope for plant equipment in an effort to limit

ongoing maintenance costs and promote plant efficiency. Designed and initiated the implementation of a continuous overflow system to improve the

safety of current operating practices.

Hot Mills Engineering (Nov 2013 – Feb 2014) Developed 2nd Cycle Energy Efficiency Opportunities (EEO) reports for both the Hot Strip Mill and

Plate Mill to meet Federal Government requirements. This involved assessing current plant efficiency against previous plant efficiency, and performing meetings with key personnel to identify opportunities for improvements. Findings were presented to managers and other key personnel.

Energy Services Operations (Jul 2012 – Feb 2013) Safely performed isolations of equipment and supervised work being performed to ensure a safe

atmosphere was maintained. Performed meetings with key personnel to review monthly alarms and alarm philosophy, and

identify nuisance alarms for removal. Performed risk assessments and updated the dangerous goods stores register to ensure

compliance with government regulations.

Page 2: JChambers CV

Joshua Chambers Page 211/4 Pine Street, Randwick, NSW 2031Phone: 0451 653 839 E-Mail: [email protected]

Environmental Engineering (Jun 2012 – Aug 2012) Updated waste management records for departments across PKSW to assist in the generation of

yearly waste reports for the Environmental Protection Agency (EPA). Reviewed atmospheric emissions figures to ensure compliance with regulations imposed by the

EPA.

Ironmaking Engineering (Feb 2012 – Jul 2012) Communicated between departments and companies to manage a small project involving the

Lime Kiln and Gypsum Plant. A pre-feasibility study was completed to identify potential benefits, and actions required for its implementation.

Reviewed the condition of the de-dusting systems in the Sinter Plant, and Ore Preparation Department, and developed reports to assist with the development of a maintenance plan.

Hot Mills Engineering (Jul 2011 – Feb 2012) Reviewed ladder logic for the furnace Coke Ovens Gas control system to identify its function and

update the incomplete Functional Design Specification for the system.

Slabmaking Engineering (Jan 2011 – Jul 2011) Performed condition monitoring and observed key trends to identify potential issues arising. Completed gas safety training and assisted in isolation of gas systems and equipment.

General Responsibilities Performed audits to ensure compliance with safety and environmental policies.

September 2013 - Present

Town and Country Hotel – St Peters, NSW

Responsibilities Manage small bar (up to 40 patrons) and provide service to customers, typically without

assistance. Provide training and supervision for new employees.

Extra Curricular/Interests

June 2014 - Present

Rifleman, 4/3 RNSWR, Delta Company, Holsworthy

Sporting Licence Member, Certificate C

CMAS 1 Star Diver

Page 3: JChambers CV

Joshua Chambers Page 311/4 Pine Street, Randwick, NSW 2031Phone: 0451 653 839 E-Mail: [email protected]

Professional References

Stephen Brell

Senior Process Engineer/Chemical Engineering Cadet CoordinatorBlueScope Steel, SlabmakingPh: 4275 3339Mob: 0407 711 128

Ruwan Brell

Process SpecialistBlueScope Steel, Gas ProcessingPh: 4275 3501Mob: 0481 438 075