Jenx Catalogue 2011

Every position a child adopts has an effect on their development and functional movement now and in the future.

jenx.com

Catalogue 2010 / 2011 Contents © Jenx 2010

CO

NTEN

TS

1

About Jenx ...................................................................02

Seating ..........................................................................06 Junior .............................................................................10 Zeta ................................................................................14 Beta ................................................................................18 Bee .................................................................................22 Giraffe ............................................................................26 Corner Seat ..................................................................30

Design ...........................................................................34

Standing .......................................................................38 Supine Stander ...........................................................42 Prone Stander .............................................................46 Monkey .........................................................................50 Penguin .........................................................................54 Rex ..................................................................................58

Quality Assurance .......................................................64

Sleeping ........................................................................68 Dreama ..........................................................................70

Courses Overview ......................................................74

Jenx Innovation Award .............................................76

Therapy .........................................................................78 Ziggy ..............................................................................82 Nursery Table ...............................................................83 Advanced Side Lying Boards ...................................84 Mobyvent Trolley .......................................................85 Wedges, Rolls and Mats ............................................86

Research & Development ........................................88

APPROVE ......................................................................90

Common Fittings .......................................................92

Contact Us .....................................................................94

Contents

2

jenx.com/about-us

Catalogue 2010 / 2011

AB

OU

T JENX

3

About JenxJenx was founded by a paediatric physiotherapist and a product designer in 1982, with the aim of enriching lives and changing perceptions about disability.

Our innovative postural support products are developed with care and expertise to help children with special postural needs to live happy and fulfilling lives. By working closely with children, carers and therapists we create products that put people first.

For more than quarter of a century Jenx has been researching, designing and making pioneering developmental furniture that supports children as they grow.

Our products are underpinned by years of experience and commitment to helping children and families achieve greater independence and freedom. Because of this, Jenx makes a real difference to lives, enabling children to experience a wider range of activities in comfort.

Every position a child adopts has an effect on their development and functional movement both now and in the future, and we strive to provide the support children need to help them to flourish.

Over the years Jenx has become the UK’s most respected company dedicated to developmental furniture for children. Every day we apply our expertise in paediatric therapy and innovative design to finding better ways to help children with special postural support needs.

We believe in putting people first and building strong, supportive relationships with our customers. Experienced product advisers can offer information and guidance, and would be glad to visit you to discuss how the Jenx range could help you.

All our products are made in Sheffield, England, to exacting safety standards.

“ By working closely with children, carers and therapists we create products that put people first”

Catherine Jenkins, Jenx

Go to jenx.com/about-us

4

jenx.com/case-studies


“We’veseensuch developmentinEthan,his progressisfantastic,andhis smilesareevenbigger” Sue,Ethan’sMum Gotojenx.com/case-studiestoreadmore

CA

SE STUD

IES

5

For many children, sitting positions can be difficult to maintain. Jenx seats are designed to support children with all kinds of postural needs, in a wide range of situations.

Seating

6

jenx.com/products/seating


Hip position is critical as it provides the foundation upon which a child’s overall posture is based. Once the pelvis is secure, the feet can be supported, either by resting freely on the support surface or held in position with sandals. Support for the spine may be necessary and also for the head.

Jenx seating products can be adjusted easily to increase function, relaxation or activity.

Features such as Recline, where the angle at the hips is increased, or Tilt-in-Space, where the whole system is tilted in space whilst maintaining the individual joint postures, offer real flexibility for children, carers and therapists. The range of adjustment in Jenx seating provides children with a sound postural start from which functional movement can follow.

SEATING

SEATING

7

8

jenx.com/products/seating


Junior 1 - 12 years, 3 sizes .....................................................10 Comfortable contoured modular seating system.

Zeta 8 - 18 years, 2 sizes .....................................................14 Fully adjustable modular seating system.

Beta 3 - 12 years, 2 sizes .....................................................18 Fully adjustable modular abduction seating system.

Seating

SEATING

9

Bee 4 months - 5 years, 1 size ......................................... 22 Fully adjustable modular seating system.

Giraffe 9 months - 4 years, 1 size ......................................... 26 Fully adjustable seating system.

Corner Seat 6 months - 10 years ................................................... 30 Adjustable floor based seating system.

10

jenx.com/products/seating/junior


JuniorJunior offers children with a wide range of seating needs the opportunity to get active with others. Its unique design gives excellent pelvic stability, and the optional Ischial Bar helps to prevent a child from sliding down in the seat.

Comfortable contoured modular seating system. Available in three sizes to suit the needs of children aged between 1 and 12 years.

Junior is moulded in PU, which offers excellent support, easy cleaning and no issues with liquid becoming absorbed into the foam. It can be wiped down using antibacterial wipes or spray.

Junior offers conventional, reclined and Tilt-in-Space settings and has lots of adjustment to accommodate children of different sizes and proportions. It has a fabulous range of cover colour options so children can customise the look of their Junior to their own taste. Covers can be washed, and a basic PU cover is included for use while your child’s colourful favourite is being laundered.

The Y-base offers a great range of seat height options and the hydraulic system reduces the amount of work involved in making height alterations, therefore protecting carers whilst supporting children.

SEATING

11

12

jenx.com/products/seating/junior


Junior | Key Features and Benefits

• Seat contoured and moulded in PU. Unique memory foam insert for excellent pelvic positioning. Fluids cannot ingress PU; Junior is simple to keep clean.

• Y-base offers perhaps widest range of height adjustment available. All in one Tilt-in-Space facility as standard.

• Modular specification; build Junior to suit your child. Wide range of optional components lets you tailor Junior to each child’s specific needs.

• Unique padded 4-point lap strap as standard. In conjunction with seat pad, Junior offers exceptional pelvic control.

• Hip pads adjust for width and angle giving vital close-up control. Optional hip pad (OC) extensions offer support to whole upper leg.

• Supplied with reversible, washable covers. Colour options available. Simple cover supplied to use when washing reversible covers.

• Optional Ischial Bar prevents slipping into sacral sitting. (OC)

• Interface plate allows fixing of different ranges of headrests to Junior. (OC)

• Translucent tray infill; stickers can be placed beneath surface to aid communication. (OC)

Easy-clean trayShown with Multigrip™ headrest

(OC) Optional Component

SEATING

13

Seat and back pad reversible covers

Flip away thoracic support

Translucent tray infill

• Ischial Bar

• Push handle fold-down

• Flip-away thoracics with chest strap

• Tray arms

• Grey tray with black trim

• Hip pad extensions (pair)

• Headrests

• Multigrip™ headrest

• Jenx to Stealth/Whitmeyer Interface Plates

• Zip waistcoat harnesses

• Sandals

• Shoulder protractor

Junior | Specifications

Optional Components

Technical SpecificationsJunior Units Junior 1

JUC01Junior 2 JUC02

Junior 3 JUC03

Age range (approx) mths/yrs 1 - 5 years 3 - 8 years 5 - 12 years

Max user weight kg 50kg 50kg 50kg

Back angle (Recline/Prone) degrees 15° - 15° 15° - 15° 15° - 15°

Back pad height (seat to top Min/Max) mm 300 - 420 350 - 470 400 - 520

Y-base size (Footprint) mm 780 x 650 780 x 650 780 x 650

Chest width (Min/Max) mm 185 - 280 185 - 280 185 - 280

Hip width (Min/Max) mm 170 - 330 170 - 330 170 - 330

Seat height from floor (Y-base Min/Max) mm 305 - 760 340 - 760 340 - 760

Seat depth mm 210 - 305 240 - 320 275 - 390

Lower leg length mm 175 - 280 240 - 380 270 - 420

Tilt-in-Space angle (Supine/Prone) degrees 25° - 15° 25° - 15° 25° - 15°

Go to jenx.com/products/seating/junior for colour options and further information.

14

jenx.com/products/seating/zeta


Zeta

Covers are available in a variety of colours and can be washed for freshness. And because Zeta is fully upholstered, your child can continue to use it even whilst the covers are being laundered.

Zeta is a product of choice for children between the ages of 8 and 18 years as it combines excellent function with good looks and versatility. The age appropriate colour options offer children the chance to customise their Zeta to their own taste.

Zeta is a highly adjustable seating system specifically designed to meet the needs of older children. Most adjustments on Zeta are assisted by gas springs or hydraulic systems to reduce manual handling for carers. It has a number of build options to further increase its versatility.

Fully adjustable modular seating system for 8 to 18-year-olds.

SEATING

15

16

jenx.com/products/seating/zeta


Zeta | Key Features and Benefits

• Large size to accommodate teens and young adults.

• Wide range of adjustments to support different sitting postures, conventional sitting, reclined sitting and Tilt-in-Space facility.

• Loose covers available to customise look of Zeta.

• Sturdily built to withstand the rigours of regular use by large children.

• Sturdy hydraulic adjustable height Z-base with flip-up footplate to allow self and assisted standing transfers.

• Optional push handle (OC) to ease pushing Zeta in an indoor environment.

• Modular specification with a wide range of optional components to tailor Zeta to the exact needs of each user.

Large size accommodates teens and young adults

Loose covers available to customise look of Zeta

Modular specification with a wide range of optional components


SEATING

17

Zip vest Abduction block

Knee pads Optional push handle

• Abduction blocks• Kneeblocks• Hip pads• Hip pad extensions• 15° seat wedge• Short thoracics• Flip-away short

thoracics • Thoracics with

chest strap • Flip-away thoracics

with chest strap • Elbow blocks• Shoulder protractors • Push handle• Folding push handle

• 38mm wrap-around pad for thoracic clip

• Multigrip™ headrest• Headrest• Zip waistcoat

harness• Chest strap

shoulder harness• 4-point lap strap• Arm rests• Arm rest covers• Tray• Grab bar (modular)• Activity frame• Chest pad on tray• Padding on

tray edge

Zeta | Specifications

Optional Components

Go to jenx.com/products/seating/zeta for colour options and further information.

Technical SpecificationsZeta Units Zeta 1

GC80-82Zeta 2

GC80-82

Age range (approx) mths/yrs 8 - 14 years 12 - 18 years

Max user weight kg 80kg 80kg

Back angle (Recline/Prone) degrees 30° - 10° 30° - 10°

Back pad height (seat to top Min/Max) mm 350 - 500 450 - 660

Z-base size (Footprint) mm 650 x 780 650 x 780

Chest width (Min/Max) mm 185 - 280 225 - 320

Hip width (Min/Max) mm 210 - 360 250 - 390

Seat height from floor (Z-base Min/Max) mm 485 - 670 485 - 670

Seat depth mm 360 - 450 430 - 520

Lower leg length mm 260 - 530 260 - 530

Tilt-in-Space angle (Supine/Prone) mm 20° - 10° 20° - 10°

Fully adjustable modular abduction seating system for 3 to12-year-olds.

Beta

18

jenx.com/products/seating/beta


SEATING

19

Beta is a unique seating system dedicated to those children who need or prefer to sit with their legs abducted.

Children who have high muscle tone in their legs may well find that sitting in abduction helps to reduce their tone and make sitting more comfortable.

The abduction roll on Beta is adjustable so you can choose just how much abduction your child is offered. The abduction offered can be adjusted for each leg so every child can use Beta in a way that works for them.

20

jenx.com/products/seating/beta


Beta | Key Features and Benefits

• Unique adjustable abduction roll to support abduction and provide stable sitting base. Abduction roll adjusts on each side independently to offer independent leg support. Highly effective in reducing muscle tone for children with very high tone.

• Height adjustable Y-base to raise or lower Beta to the best working height for each activity.

• Highly adjustable tray. Adjusts for distance towards the child, height and angle. Provides large, stable working surface when there is no suitable table to be used. (OC)

• Sandals are highly adjustable to enable them to be set to fully support your child’s legs. The sandals provide the leg length adjustment for Beta.

• Interface plates available to enable fitting of Stealth or Whitmeyer headrests.

• Angle adjustable hip pads to help to control hip position.

Modular design with an extensive range of optional components

Stealth/Whitmeyer Interface Plates available

Sandals

Unique adjustable abduction roll helps control extension

Y-base allows easy height adjustment


SEATING

21

Abduction roll Abduction roll expanded

Tray Y-base

• Tibia reduction bracket

• Flip-away short thoracics size 1 (pair)

• Thoracics with chest strap size 1 (pair)

• Shoulder protractors size 1

• Folding push handle• Zip waistcoat

harness• Arm rests size 1

(pair) • Tray • Full padding on tray

Beta | Specifications

Optional ComponentsTechnical SpecificationsBeta Units Beta 2

GC13-15Beta 3

GC16-18

Age range (approx) mths/yrs 3 - 8 years 5 - 12 years


Back angle (Recline/Prone) degrees 15° - 15° 15° - 15°

Back pad height (seat to top Min/Max) mm 350 - 470 400 - 520

Y-base size (Footprint) mm 780 x 650 780 x 650


Hip width (Min/Max) mm 185 - 280 185 - 280

Seat height from floor (Y-base Min/Max) mm 315 - 760 315 - 760

Lower leg length mm 240 - 370 270 - 390

Tilt-in-Space angle (Supine/Prone) mm 25° - 15° 25° - 15°

Go to jenx.com/products/seating/beta for colour options and further information.

Bee

22

jenx.com/products/ seating/bee


Bee helps your child get busy – busy sitting well, joining in, playing and creating. Young children flourish in an environment where they can choose to take part in different activities, or where they can watch as others introduce them to a new interest.

Fully adjustable modular seating system for young children aged between 4 months and 5 years.

SEATING

23

For children who have difficulty sitting, Bee overcomes that barrier to joining in. It is a seating system designed to support young children from four months to five years as they learn to sit. Bee offers conventional sitting, reclined sitting, Tilt-in-Space sitting and, by adding the Long Leg Conversion, it allows long leg sitting too.

Bee can be specified to your child’s needs so you can choose the optional components that will make sitting a favourite activity. Bee supports functional growth whilst helping children do what they want and need to do.

Bee has a large height range so your child can reach every activity on offer, whether it is sitting near the floor with brothers and sisters to watch TV or joining the family at the dinner table or breakfast bar. Bee has been designed to enliven every part of a child’s waking day and to offer carers the chance to engage with their child literally at every level.

24

jenx.com/products/seating/bee


Bee | Key Features and Benefits

• Child-friendly design makes Bee an ideal first seating system for children from 4 months to 5 years.

• Large range of adjustment means that Bee lasts and lasts.

• Extensive range of optional components allows you to specify Bee exactly your way. This ensures that each child is fully and appropriately supported at all times.

• Range of sitting position options including conventional, long leg sitting and Tilt-in-Space.

• Simple to use, proven design. Supporting lots of very young children all around the world.

Bee showing Y-base, Multigrip™ headrest, Multigrip™ shoulder protractor, knee blocks and sandals

Bee with X-baseBee with X-base, long leg conversion and bootees

SEATING

25

Child friendly design

Long leg conversion

Nursery tray Bootees

• Short fixed thoracics• Flip-away thoracics with chest strap• Long leg conversion• Arm rests• Nursery tray• Activity frame• Knee blocks• Footplate pad • Bootees• Sandals• Abduction block • Multigrip™ shoulder protractor

Bee | Specifications

Optional Components

Go to jenx.com/products/seating/bee for further information.

Technical SpecificationsBee Units Bee

NC01/NC12

Age range (approx) mths/yrs 4 mths - 5 years

Max user weight kg 25kg

Back angle (Recline/Prone) degrees 10° - 15°

Back pad height (seat to top Min/Max) mm 270 - 360

X-base size (Footprint) mm 600 x 615

Y-base size (Footprint) mm 650 x 780

Chest width (Min/Max) mm 150 x 270

Hip width (Min/Max) mm 130 - 250

Seat height from floor (X-base Min/Max) mm 340 - 510

Seat height from floor (Y-base Min/Max) mm 285 - 750

Seat depth mm 110 - 350

Lower leg length mm 95 - 345

Depth with leg conversion (Min/Max) mm 370 - 560

Tilt-in-Space angle (Supine/Prone) degrees 25° - 5°

Adjustable seating system for young children between 9 months and 4 years.

Giraffe

26

jenx.com/products/seating/giraffe


SEATING

27

Giraffe is an ideal first seat for young

children. It can fully support your child as he or she learns

to sit and offers numerous features to encourage new skills.

Sitting opens up lots of opportunities for tray or table-based activities and Giraffe can be adjusted to suit most children and their chosen interests.

Giraffe offers conventional, reclined and Tilt-in-Space sitting. There are a number of optional components for the sturdy tray, including grab bars, tray padding and an activity frame. Giraffe becomes your child’s close friend and will suit children from approximately nine months old to about four years old. A great investment.

28

jenx.com/products/seating/giraffe


Giraffe | Key Features and Benefits

• Delightful, simple yet effective first seating system for very young children 9 months to 4 years. Blends well into the nursery or home environment.

• Adjusts to offer a variety of sitting positions including long leg sitting. Sitting position is very important to help children to learn sitting balance, to introduce them to various sitting based activities and to offer a seated perspective on life.

• Multi-adjustable knee blocks offer support to maintain abduction, prevent external rotation and correct windswept posture.

• Ease of use. Makes life easier for everyone and encourages regular changes of posture which in turn prevent a child sitting in one position for extended periods of time.

• Excellent range of adjustment to offer customised support to each child.

• High specification as standard. Giraffe suits a very wide range of children.

Blends well into a nursery environment

Multigrip™ headrest

Knee blocks

Locking castors

SEATING

29

Adjustment range

Multi- adjustable knee blocks

Tray Sandals

• Zip waistcoat harness

• Activity frame• Grab bar

Giraffe | Specifications

Optional Components

Technical SpecificationsGiraffe Units Giraffe

NR10

Age range (approx) mths/yrs 9 mths - 4 years


Back angle (Recline/Prone) degrees 10° - 15°

Back pad height (seat to top Min/Max) mm 270 - 360

Base size (Footprint) mm 630 x 460

Chest width (Min/Max) mm 135 - 360

Hip width (Min/Max) mm 130 - 250

Seat height from floor mm 400

Seat depth mm 150 - 310

Lower leg length mm 120 - 350

Tilt-in-Space angle (Supine/Prone) degrees 30° - 5°

Go to jenx.com/products/seating/giraffe for further information.

30

jenx.com/products/seating/corner-seat


Adjustable floor based seating

system for infants and young children.

Corner Seat

The Corner Seat is available in three sizes to suit children from six months to approximately 10 years.

It offers children support in long sitting, which is children’s usual first sitting position. Long sitting, with the legs stretched out in front, helps to maintain the length of the muscles behind the knee.

SEATING

31

The Corner Seat has an adjustable height back and can be used with or without the upper back support. An abduction block is used to help keep your child well positioned, with their hips neatly back into the seat. The corner shape helps to maintain your child in midline and, if you prefer to have a flat back with wings at the side, there are small triangular cushions available to place at the back to provide this setting.

The corner seat is an ideal first seat for any child, and can be used with the Jenx Nursery Table. Small touch and close tape straps are used to keep the two products safely connected to each other whilst in use.

32

jenx.com/products/seating/corner-seat

Catalogue 2010 / 2011 (OC) Optional Component

Corner Seat | Key Features and Benefits

• Simple first seat to introduce children to floor sitting.

• Available in 3 sizes to suit children between 6 months and 10 years.

• Adjustable upper support can be used to support head or shoulders.

• Sturdy ‘wings’ and corner design help to maintain symmetry of your child’s spine.

• Can be used with Jenx Nursery Table to create a great working space for lots of fun things including working with other children across the table. (OC)

Jenx Nursery Table is the perfect accessory for Corner Seat (see page 83)

Corner Seat shown with Abduction Block and optional corner seat wedges

SEATING

33

Corner Seat | Specifications

Safety buckle Chest strap

Abduction block

Top removed Adjustable Nursery Table

• Nursery Table• Corner seat wedge

Optional Components

Technical SpecificationsCorner Seat Units Corner Seat 1

NR41Corner Seat 2

NR42Corner Seat 3

NR44

Age range (approx) mths/yrs 6 mths - 2 years 1 - 6 years 4 - 10 years

Max user weight kg 25kg 35kg 50kg

Back pad height (seat to top Min/Max) mm 315 - 425 440 - 620 500 - 680

Base size (Footprint) mm 490 x 500 520 x 540 600 x 630

Seat depth mm 350 370 465

Go to jenx.com/products/seating/corner-seat for further information.

34

jenx.com/innovation-knowledge


Design

When a new product idea is initiated, wide ranging consultation leads to the creation of a detailed product brief that outlines a clear set of objectives. The next stage is to develop and evaluate a series of concept sketches before taking the most successful ideas through to the prototype stage.

Designs are developed using CAD and prototypes are created in our development workshops. At various stages, prototypes

are tested internally for strength and stability and externally for fitness for purpose and other considerations. This process continues until we have a model that meets all the objectives of the development brief.

The model is now brought into production. This involves another series of tests and verification procedures to ensure that we now have an exceptional quality Jenx product ready to launch.

Every Jenx product is the outcome of a thorough design process, which draws on input from therapists, carers, our own experts and wider research developments in the field.

DESIG

N

35

“Innovation, research and development is fundamental to Jenx” Clive Jenkins, Jenx Go to jenx.com/innovation-knowledge to read more

36



Design | The Design Process

Initial ideas for a new product come from working closely with parents, therapists and children themselves

A detailed product brief is written after wide ranging consultation and research

Preliminary sketches are made and evaluated against the product brief; the most successful concepts are further developed

The first prototype is made then tested and evaluated at our innovation centres

The design is refined and developed, and new prototypes made, until the product meets the exacting requirements of the brief

Final testing. Special moulds and tools are created, the product is tested again and production begins

Product launch!

37

DESIG

N

38

jenx.com/products/standing


Standing

Children gain huge psychological benefits from standing, as well as important physical and developmental advantages. So standing plays a crucial role in therapy programmes for children with many kinds of developmental needs.

There’s no such thing as standing still. To achieve balance and stability while standing requires tiny movements of all the main joints of the foot, leg, hip and spine. It requires control of lots of different areas of the body, and takes time and practise to achieve.

The Jenx range of standing frames offers a wide variety of standing positions to address every child’s needs. And because standing is such a dynamic process, our products are designed to support standing by allowing joints to be mobile in order to help to train balance and encourage development.

STAN

DIN

G

39

40

jenx.com/products/standing


Supine Stander 9 months - 11 years, 2 sizes .................................... 42 Supported supine standing system.

Prone Stander 3 - 14 years, 2 sizes ..................................................... 46 Supported prone standing system.

Standing

STAN

DIN

G

41

Monkey 9 months - 4 years ...................................................... 50 Prone to upright adjustable standing system.

Penguin 18 months - 4 years ................................................... 54 Flexible upright standing system.

Rex 3 - 7 years .................................................................. 58 Flexible upright standing system.

42

jenx.com/products/standing/ supine-stander


Supine StanderSupported supine standing for children from 9 months to 11 years old.

STAN

DIN

G

43

Supine Stander is a robust standing support that offers children comfort and safety whilst standing. Children are supported at the back, leaving their hands free to access items on a tray or table in front of them. Free from the work of standing, your child can devote his or her attention to the activities they wish to take part in, while their whole body posture is protected by comfortable straps and supports.

In order to reduce manual handling, children can be hoisted onto Supine Stander and the supports put in place before the stander is brought into a more upright position. Children often tolerate this mode of standing well and can enjoy activities that are difficult for them to access in sitting.

In the therapy situation, Supine Stander offers support for many function enhancing therapy activities such as standing balance and weight transfers.

44

jenx.com/products/standing/supine-stander


Supine Stander | Features and Benefits

• Adjusts to horizontal for ease of hoisting user onto surface.

• Support boards fully moulded in comfortable, easy to clean PU padding to improve ease of cleaning and prevent ingress of fluids into padding.

• Removable sections make it easy to alter the height of Supine Stander.

• Unique rotation control knee supports help to improve standing position and adjust weight bearing.

Supine Stander with Multigrip™ headrest

STAN

DIN

G

45

Tray with bowl insert

Sandals Safety straps De-rotational knee positioning straps

• Tray with bowl• Head positioning

cushion• Multigrip™ headrest• Positioning pads• Thin thoracic pads• Sandals

Supine Stander | Specifications

Optional ComponentsTechnical SpecificationsSupine Stander Units Supine Stander 1

SUC03Supine Stander 2

SUC04

Age range (Approx) mths/yrs 9 months - 4 years 3 - 11 years

Angle range (0° = upright) degrees 10° - 90° 10° - 90°

Base size mm 575 x 660 650 x 995


Hip pads width (Min/Max) mm 130 - 310 130 - 310


Max user height (Supine) mm 660 - 1000 820 - 1270

Tray depth to cutout mm 370 370

Tray width mm 680 705

Go to jenx.com/products/standing/supine-stander for colour options and further information.

46

jenx.com/products/standing/prone-stander


Prone Stander

Supported prone standing for children from 3 to 14 years old.

STAN

DIN

G

47

Prone Stander is dedicated to assisted prone standing – child supported at the front, and offers a continuous range of angles so the optimum position for each child can be achieved.

Prone Stander has good looks and sound functions to make standing enjoyable and practical for your child, and simple for you to achieve. The individual support pads can be adjusted in relation to each other to ensure every child can be properly supported. Children with longer bodies and shorter legs can be just as comfortable as those with shorter bodies and longer legs. Prone Stander is great for every child.

The sturdy hip and chest straps are closed in the centre and then adjusted by pulling from either side. This feature, common to many Jenx Products, encourages symmetry. Once the straps are secured, the integral safety strap is fastened to complement the postural support. This helps to prevent other children suddenly releasing a strap. It is important always to use the safety strap and to fasten it as far as possible to maximise its usefulness.

48

jenx.com/products/standing/prone-stander


Prone Stander | Features and Benefits

Prone Stander showing tray with bowl

Prone Stander with tray removed

• Low foot plate to aid standing transfers.

• Bright frames with easy-read height and angle indicators.

• Continuous, smooth hand operated angle adjustment means that adjustments can be made while your child is standing.

• Removable, adjustable tray with bowl and full tray infill.

• All support surfaces adjust so setting Prone Stander up for the proportions of your child is simple. Knee cups adjust independently.

• Range of optional components available.

STAN

DIN

G

49

Flip-up footplate

Tray Height indicator

Angle adjustment winder

Prone Stander | Specifications

Optional Components

Go to jenx.com/products/standing/prone-stander for colour options and further information.

Technical SpecificationsProne Stander Units Prone Stander sz1

PS01Prone Stander sz2

PS02

Age range (Approx) mths/yrs 3 - 7 years 6 - 14 years

Angle range (0° - upright) degrees 0° - 40° 0° - 40°

Base size mm 900 x 650 1200 x 710

Chest height from footplate (Min/Max) mm 660 - 1000 820 - 1270


Hip pads width (Min/Max) mm 190 - 290 230 - 350


Tray depth to cutout mm 460 480

Tray width mm 620 700

• Chest wedges• Bibs, 3 Pack• Tray wings• Sandal raising

spacers• Tray no cut-out

50

jenx.com/products/standing/monkey


Monkey is a popular choice because it answers the standing needs of so many young children, whilst looking good and being extremely easy to use.

MonkeyProne to upright adjustable standing system for children aged 9 months to 4 years.

STAN

DIN

G

51

Monkey offers prone standing – standing supported in front – with a continuous range of standing angle adjustment of between 20 degrees from the horizontal to upright. Because children often have quite subtle reactions to standing angle, we have designed Monkey to allow the angle to be adjusted smoothly and simply, even whilst your child is using the product. This enables you to ensure the best standing angle each time your child chooses to stand.

Monkey’s chest and hip supports can be adjusted independently of each other. This means that not only can Monkey be adjusted to precisely suit each child’s proportions, but also that the two pads can be adjusted to leave space between them to accommodate a feeding button, for instance, and prevent pressure over it whilst standing – an important consideration for your child’s wellbeing and comfort. Side supports are adjustable in many different directions to exactly match a child’s needs, improving comfort and the efficacy of his or her standing. So no monkey business, just great function-enhancing performance.

52

jenx.com/products/standing/monkey


Monkey | Features and Benefits

Monkey in low angle position

• Ideal first stander. Offers range of standing angles from 20 degrees to upright with continuous adjustment between.

• Side pads for hips and chest have wide range of width and angle adjustment so you can contour support precisely for each child.

• All adjustments are simple and quick so Monkey can be used for a number of children at one location, changing from one to another with very little work.

• Angle adjustable tray with bowl infill and insert to encourage tray based messy play, art and ease of access for school work.

• Suits children from 9 months to 4 years so everyone gets used to Monkey and it provides very good value for money.

• Strong hip and chest straps have integral safety strap feature.

Monkey featuring bowl inset

STAN

DIN

G

53

Monkey | Specifications

Optional Components

Go to jenx.com/products/standing/monkey for colour options and further information.

Technical SpecificationsMonkey Units NR50

Age range (Approx) mths/yrs 9 months - 4 years

Angle range (0° = upright) degrees 0° - 20°

Base size mm 880 x 575

Chest height from footplate (Min/Max) mm 510 - 750


Hip pads width (Min/Max) mm 150 - 235


Tray depth to cutout mm 360

Tray width mm 530

• Activity frame• Grab bar

Sandals Support straps


Adjustment angle

54

jenx.com/products/standing/penguin


Assisted upright standing is a way for children with moderate ability to experience standing and to improve muscle strength.

PenguinUpright adjustable standing system for children aged 18 months to 4 years.

STAN

DIN

G

55

In order to be effective, standers must have the capacity to adjust in the correct way to offer children true upright standing. This means the stander needs to have adjustment in three planes to ensure that the support it gives encourages an efficient standing position.

Penguin has been designed to offer excellent support for children in upright standing, and the range of support and adjustment options available creates products that are suitable for children aged between 18 months and 4 years old.

56

jenx.com/products/standing/penguin


Penguin | Features and Benefits

Penguin with tray and bowl insert

Safety lockable castors

• Smart upright standers on a base with lockable castors.

• Hip and knee supports adjust for height, forwards and backwards and for angle to support each child in the best possible position to increase efficiency in standing.

• Sandals can be moved almost anywhere on the footplate to improve posture and promote efficient standing.

• Angle adjustable tray can be removed so Penguin can get close up to tables, sand trays or other work surfaces.

STAN

DIN

G

57

Penguin | Specifications

Go to jenx.com/products/standing/penguin for colour options and further information.

Technical SpecificationsPenguin Units NR55

Age range (Approx) mths/yrs 18 months - 4 years

Angle range (0° - upright) degrees 0° only







Tray width mm 530


Support straps

Knee supports


Optional Components• Activity frame• Grab bar

58

jenx.com/products/standing/rex


Assisted upright standing is a way for children with moderate ability to experience standing and to improve muscle strength.

RexFlexible upright standing system for young children aged 3 to 7 years.

STAN

DIN

G

59

In order to be effective, standers must have the capacity to adjust in the correct way to offer children true upright standing. This means the stander needs to have adjustment in three planes to ensure that the support it gives encourages an efficient standing position.

Rex has been designed to offer excellent support for children in upright standing, and the range of support and adjustment options available creates products that are suitable for children aged between three and seven years.

60

jenx.com/products/standing/rex


Rex | Features and Benefits

Safety lockable castors

• Smart upright stander on a base with lockable castors.

• Hip and knee supports adjust for height, forwards and backwards and for angle to support each child in the best possible position to increase efficiency in standing.

• Sandals can be moved almost anywhere on the footplate to improve posture and promote efficient standing.

• Angle adjustable tray can be removed so Rex can get close up to tables, sand trays or other work surfaces.

Sandals

STAN

DIN

G

61

Rex | Specifications

Go to jenx.com/products/standing/rex for colour options and further information.

Technical SpecificationsRex Units DNR55

Age range (Approx) mths/yrs 3 - 7 years

Angle range (0° - upright) degrees 0° only







Tray width mm 600

Optional Components• Activity frame• Grab bar


Chest pad Adjustable supports

Knee supports

62

jenx.com/case-studies


CA

SE STUD

IES

63

“Teachersareabletofocus onchildrens’learning,play anddevelopmentatschool, whilstJenxproductstakecare oftheirpostureandsupport” MrsWilson,Headmistress Gotojenx.com/case-studiestoreadmore

64



Quality underpins everything that we do at Jenx and this is reflected in the high standard of our products and the dedication of our workforce.

Quality Assurance

65

QUA

LITY ASSURA

NC

E

66



Quality Assurance

All our working practices adhere to strict quality systems. Every time a process is initiated – whether it is in manufacturing, sales or administration – a written procedure is created for all team members to follow. Each procedure is audited regularly and the results are carefully evaluated and acted upon.

In a changing environment, this approach ensures that Jenx remains efficient, effective

and relevant, and provides our customers with peace of mind that every order will be fulfilled on time and made to the same exacting standards.

The Post Sales Vigilance Process allows us to analyse the performance of a product and feed that information back into the design process. This ensures that our products are constantly being improved in a very real way.

All Jenx products are manufactured in Sheffield, England, and we have been awarded the right to use the prestigious ‘Made in Sheffield’ mark, which is internationally recognised as a stamp of exceptional quality.

Jenx holds ISO 9001:2008 certification.

67

QUA

LITY ASSURA

NC

E

Sleeping

68

jenx.com/products/sleeping


Lying is usually how we like to rest, and Jenx has designed a range of products that offer children optimum postural support while they relax or sleep in comfort.

Each product allows the child to experience better quality rest by reducing the unwanted action of postural reflexes and asymmetrical muscle tone. Each lying posture or attitude – whether that is on his or her front (prone), back (supine) or side – will affect a child’s level of relaxation and potential for movement.

Jenx products are designed to enhance the lives of children by supporting postures that enable function now, whilst preventing or delaying loss of functional movement in the future. We are committed to helping children fulfill their whole potential as they grow into adults.

SLEEPING

69

Dreama

70

jenx.com/products/sleeping/dreama


We probably spend more time in our sleeping position than we do in any other. Children need appropriate support at rest in order to sleep well and wake refreshed. For carers, the knowledge that a child

is safe and comfortable enables them to relax and get a good night’s sleep themselves. Dreama has been designed to address these two fundamental needs and to provide so much more.

A pressure relieving mattress and posture support system combined. Suitable for all ages.

Dreama is the only fully-fashioned, pressure relieving mattress available that also offers postural support in prone, supine and side lying. Its simple design means Dreama requires no difficult fastening, no nuts and bolts, no noisy touch and close tape and no extra overlays.

It simply changes the lives of children and their families for the better.

Dreama can be used on any bed that is at least 90cm (3’) wide. The base is flexible to allow it to be contoured to support partial sitting or raising of feet, for example.

The individual cushions are pressure relieving and covered with welded PU material to prevent liquid being absorbed into the foam. The PU fabric is two-way stretch, which enhances the pressure relieving quality of the foam, and is also water resistant and antibacterial.

Carers and users have praised Dreama for the exceptional difference it has made to their sleep experience.

It is much-loved for offering comfort beyond expectations, security of supports, versatility of use and for its sheer simplicity. Sleep should be one of the most relaxing times of the day for everyone in the family and Dreama can help it to become just that.

SLEEPING

71

72

jenx.com/products/sleeping/dreama


Dreama | Features and Benefits

• Unique fully-fashioned pressure relieving mattress with exceptional postural support facility.

• Most advanced resting postural support (sleep system) available. Wide range of supports to enhance user experience and benefit.

• Flexible aluminium base copes with fluids and also contours easily on profiling bed base or by using rolls or similar to create the contours.

• Glide-lock™ supports require no fixings so no noise or disturbance when adjusting support.

• No fiddly overlays, the mattress unit is undisturbed by using supports; change position without user having to be taken out of bed.

• Hundreds of individual specifications can be accommodated.

SLEEPING

73

Inserting Glide-lock™ supports

Aids to transfer

Position hoops

Fitting cushions

• Positioning pads• Positioning pads with

memory foam• Positioning hoops• Leg supports• Height adjustable

T-roll• Side lying board • Angle adjustable

footrest• Abduction blocks• Locking stops

Dreama | Specifications

Optional Components

Go to jenx.com/products/sleeping/dreama for colour options and further information.

Technical SpecificationsDreama Units Cot

DC04-06Single Bed DCO01-03

Age Range (Approx) Month / Years up to 4 years -

Base size mm 560 x 1200 900 x 1900

Height overall mm 170 170

Double mattress unit size (length x width x depth)

mm 560 x 195 x 150 1200 x 195 x 150

Single mattress unit size (length x width x depth)

mm 560 x 95 x 151 1200 x 95 x 151

Number of mattress units supplied (single:double)

- 8:2 15:2

Max user weight kg 80 110

Glide-lockTM

supports

74 Catalogue 2010 / 2011

jenx.com/training

Courses and TrainingJenx offers training courses throughout the year at the head office in Sheffield, England. These one-day sessions provide training in a wide range of skills that are appropriate to the needs of parents and professionals working with children or with medical devices.

The Jenx Product Course is a free one-day course and covers basic child development and the ways in which Jenx 24-hour positioning products are designed to promote better posture and function throughout the day.

The morning session covers basic child development and posture while the afternoon is given to hands-on learning about the Jenx range. We look at how the products are adjusted and used to give a secure starting position for functional movement as part of a child’s therapy programme.

There are spaces for up to 20 people per session to allow plenty of time for individual questions and to offer everyone a chance to get their hands on the products.

Registration takes place between 9am and 9.30am, when drinks and snacks will also be available. The course itself runs between 9.30am and 4.30pm. A light buffet lunch and refreshments will be provided.*

This course is free but we do request a £25 deposit to secure your place, which will be refunded when you attend. Unfortunately we are unable to refund deposits unless we receive notice of non-attendance of at least five working days. Course packs are sent out before the day and include a Case Study Form that should be filled in and brought to the session.

To book your place please download a booking form from our website or contact The Customer Support Team on Tel: +44 (0) 114 285 3376 or email: [email protected]

* Please let us know of any special dietary requirements at least 14 days prior to the course.

Jenx One-Day Product Course

75

CO

UR

SES

The Technical User Course is designed to teach the basic skills needed for inspection, service and re-issue of the Jenx product range. Sessions include: Introduction to the Care and Control of Medical Devices, Adverse Incident Reporting, Policy and Procedure Requirements for Safe Handling of Medical Devices, Maintenance Records, and practical sessions on fault identification and rectification.

By the end of the day delegates should be able to:

• identifyfaults

• setupasafemanagementprocedure

• workwithintherequirementsofthe MHRA guidelines with regard to device management

• sourcesparepartsandidentifythose they are competent to fit.

The day closes with a test to assess the level of understanding each candidate has gained during the session.

There is a fee of £100 per delegate for this course, which includes a light lunch and refreshments throughout the day.* A certificate of attendance showing the mark achieved in the test will be given to each delegate.

To book your place please download a booking form from our website or contact The Customer Support Team on Tel: +44 (0) 114 285 3376 or email: [email protected]

* Please let us know of any special dietary requirements at least 14 days prior to the course.

Technical User Course

76 Catalogue 2010 / 2011

The Jenx Innovation Awards have been running since 1994 in recognition of the vast range of creative, inventive and inspirational work we see every day in schools, hospital departments and other settings.


77

AWA

RD

S

The therapists we come into contact with are an innovative lot and we are consistently amazed by the new ideas we see in action. These might be ways to treat more children with a dwindling budget or to speed up waiting times, or new treatment practices and other innovations that improve the lives of children, families and carers.

Over the years entries have ranged from sessions that help teaching staff identify

children with dyspraxia and gain the correct professional interventions, to systems for evaluating the efficacy of a particular treatment or therapy in a target group.

To enter, the innovation should be described in 1,000 words or less with back up materials attached if necessary. The prize is £1,500 to spend on taking the idea further.

Each year we offer one award to paediatric physiotherapists and one to paediatric occupational therapists.

For more information please contact The Customer Support Team, Jenx Limited, Wardsend Road, Sheffield S6 1RQ, United Kingdom. Tel: +44 (0) 114 285 3376 or email: [email protected]

Therapy

Jenx therapy items are bright, easy-to-use therapy aids that children can quickly start to benefit from without undergoing formal assessment.

78

jenx.com/products/therapy


The range includes soft products such as wedges and rolls, which help with support or specific therapy treatment such as postural drainage or prone lying.

Other items in the range are used as part of regular therapy programmes.

Because of their simple designs, they can offer benefits for a number of children within a department rather than after assessment for an individual child. The Jenx therapy range is simple, flexible and pleasurable to use for children with all kinds of developmental needs.

THER

APY

79

80

jenx.com/products/therapy


Ziggy Suitable for all ages .................................................. 82 Soft, adaptable, flexible therapy tool ideal to aid support, positioning and comfort.

Nursery Table 9 months - 6 years, 3 sizes ....................................... 83 Highly adjustable table, ideal for use alongside Jenx Corner Seat (page 30).

Therapy

THER

APY

81

Advanced Side Lying Boards 1 year - young adult, 3 sizes .................................... 84 Therapy aid for all ages.

Mobyvent Trolley For use with certain Jenx products ....................... 85 Clip on accessory trolley with shelves to support ventilator or suction apparatus.

Wedges, Rolls & Mats Suitable for all ages ................................................... 86 Bespoke therapy aids for all ages.

82

jenx.com/products/therapy/ziggy


Ziggy | Features and Specifications

Technical SpecificationsZiggy Units Size 1

ZM01Size 2 ZM06

Length mm 1200 1200

Height mm 100 150

Width mm 100 150

Ziggy offers a unique experience in positioning. This highly adaptable long, soft and flexible product is square in cross section and can be bent at a number of points to create many different shapes.

Go to jenx.com/products/therapy/ziggy for further information.

Ziggy is a real one-off that can be used for positioning, support, comfort and so much more.

If you are away from home and need a corner seat to support a young child, simply bend Ziggy round into a ‘U’ shape and place on the floor – an instant corner seat. If you want to place your child prone with shoulders raised, but you don’t have a wedge, simply place him or her in position over Ziggy and bend the product around their hips to keep your child in midline.

Everyone can find a use for Ziggy. When reading, knitting or doing a crossword in a chair with low armrests or no armrests at all, your arms can become tired. Try wrapping Ziggy around your waist as you sit – you’ll find it offers wonderful, soft support for your elbows. The question is: how many uses for Ziggy can you come up with?

jenx.com/products/therapy/nursery-table THER

APY

83

Nursery Table | Features and Specifications

Technical SpecificationsNursery Table Units Size 0

NR64Size 1 NR65

Size 2 NR66

Angle range from horizontal

Degrees +40° to -40° +40° to -40° +40° to -40°

Base size mm 600 x 380 600 x 380 700 x 420

Table height (Min/Max) mm 190 - 280 245 - 345 245 - 400

Table top size mm 620 x 520 620 x 520 700 x 520

Nursery Table is fully compatible with Jenx Corner Seat. See page 30 for more information.

The Jenx Nursery Table is available in three sizes to suit children from nine months to six years old. Each table is height and angle adjustable to suit a range of activities and is ideal for use with the Jenx Corner Seat. It has a smooth, wipe-clean laminate surface that will receive suction prompts or toys. It is cut out to one side to allow the child to get really close to his or her table-top activities, and has edging around the remainder of surface to reduce the risk of objects sliding off. The Jenx Nursery Table is cheerful and adaptable, and can even be used as an easel.

Go to jenx.com/products/therapy/nursery-table for further information.

84

jenx.com/products/therapy/advanced-side-lying-board


Advanced Side Lying Boards | Features and Specifications

Side Lying Boards offer supported comfort to children while resting or during play activities. Side lying is a great position in which to recharge and also for joining in with classroom activities. Side lying takes away the worry that children with low muscle tone may rest with their spine curved. In this position your child’s spine is fully supported.

The Jenx Advanced Side Lying Board has a number of standard components that help to improve your child’s posture even more. Your child’s top leg can be supported by a bridge that allows the lower leg some movement while keeping the upper hip in a neutral or abducted position.

This product comes on a plinth to bring it up to waist height, which means ease of hoisting and less manual handling for carers.

Technical SpecificationsSide Lying Boards Units Size 2

SL2PSize 3 SL3P

Size 4 SL4P

Age range (Approx) Mths/years 9 mths - 4 years 3 - 9 years 8 - 18 years

Base size mm 1334 x 480 1634 x 580 1934 x 680

Height overall mm 950 1000 1050

Max user weight kg 80 80 80

Side lying surface (Height from floor)

mm 650 650 650

Go to jenx.com/products/therapy/advanced-side-lying-board for further information.

Advanced Side Lying Board shown with standard blocks, straps and pad.

jenx.com/products/therapy/mobyvent THER

APY

85

Mobyvent | Features and Specifications

Technical SpecificationsMobyvent Units MV1


Height overall mm 720

The Mobyvent is designed to clip on to the base frame of Jenx furniture to ensure proximity and therefore connection of tubes is maintained. It features two easy-clean shelves that will carry apparatus securely, comfortable handgrips for pushing along and a holder for an oxygen cylinder.

* Only certain makes and sizes of apparatus are suitable for use with Mobyvent. Please contact Jenx for more details about compatibility.

The Mobyvent is a handy trolley with shelves to support ventilator, oxygen bottle, suction apparatus or similar so children can bring essential items with them when they want to change rooms.*

Go to jenx.com/products/therapy/mobyvent for further information.

86

jenx.com/products/therapy/wedge


Wedges, Rolls & Mats | Features and Specifications

Jenx offers a range of soft, colourful, comfortable supports in various shapes and sizes, which can be used to create play opportunities and for specific therapy treatments. As well as our standard range of wedges, rolls and mats, we can also custom make other soft therapy products to create the precise support you are looking for.

Please contact our Customer Support Team on +44 (0) 114 285 3376 for more information.

A range of accessories, including straps, side walls and abduction blocks is also available.

(c)

(b) (a)

(d)

(c)

(a)

(b)

THER

APY

87

Technical SpecificationsRolls Units Roll Size 1

RL1Roll Size 2

RL2Roll Size 3

RL3Roll Size 4

RL4Custom

Roll

Length (a) mm 600 900 1200 900 max 1800

Height (b) roll = diameter mm 300 300 300 350 max 500

Wedges Units Wedge Size1WG1

Wedge Size 2WG2

Wedge Size 3WG3

Wedge Size 4WG4

Wedge Size 5WG5

Custom Wedge

Length (a) mm 600 500 1200 920 600 max 1800

Height (b) mm 190 150 350 300 210 max 400

Width (c) mm 600 500 600 600 600 max 800

Cut off height (d) mm 20 20 20 20 50 min 20

Wedge Custom Mat

(a)

(b) Diameter

Roll

Go to jenx.com/products/therapy/wedge jenx.com/products/therapy/roll jenx.com/products/therapy/mat for further information.

88 Catalogue 2010 / 2011


The Jenx product development process is underpinned by the latest research, conducted both within the company and by other experts internationally.

Jenx team members regularly attend conferences, exhibitions and courses in order to keep up-to-date with the latest developments in the field.

Every potential new product undergoes a period of rigorous consultation and research that directly informs the design process.

Research & Development

We work closely with carers, therapists, other professionals and of course children themselves so Jenx products are developed in response to real practical need.

89

RESEA

RCH

90

jenx.com/approve


A step-change in equipment provision that reduces costs and improves service...

...Welcome to APPROVE

Reducing the number of therapist visits

Replacing the need to buy equipment

Replacing equipment covered by the scheme when a child’s needs change

Offering constant, immediate provision to precisely meet a child’s needs at a given point in their development

Ensuring all children have recently-inspected, safe and sound equipment

Offering full training to all professionals at the start of the provision

Eliminating the need for costly storage and decontamination facilities

APPRO

VE

Contact Jenx to see how APPROVE can save you time and money

email: [email protected] web: jenx.com/approve

91

92

jenx.com/products/common-fittings


Common Fittings

A Black wing-nut Shaft lengths: 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 65mm

B Blue female wing-nut

C Yellow wing-nut Shaft lengths: 25mm, 30mm

D Red wing-nut Shaft length: 50mm

E Diamond wing-nut Shaft length: 25mm

F Scallop hand wheel Size: small and large

G Flathead screw Shaft lengths: 15mm, 20mm, 25mm, 30mm, 35mm, 40mm,45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 90mm, 100mm

H Cap screw

I Counter-sink screw Shaft lengths: 20mm, 25mm, 30mm, 35mm

J Cheese head bolt Shaft length: 25mm

K Barrel nut Lengths: 12mm, 16mm, 30mm

L T-nut

M Insert nut Lengths: 10mm, 13mm

A B C D

E F G H I

J K L M

Jenx products use a range of common

fittings. Here is a quick reference guide should

you need to re-order any lost pieces.

CO

MM

ON

FITTING

S

93

N Nyloc nut

O Lock nut

P Nylon spacer Lengths: 5mm, 7.5mm, 10mm, 15mm, 20mm, 25mm, 30mm

Q Plastic washer Hole size: small 6mm, large 6mm, 8mm

R Metal washer Hole size: 6mm and 8mm hole

S Cam lock

T Turn button, tray

U Tri-glide Size: small and large

V Round internal end cap

W Square internal end cap

X External end cap

Y Two port external end cap

Z Plastic foot

N O P Q R

S T U V

W X Y Z

94

jenx.com/contact-us


Contact Us

Jenx Limited Wardsend Road Sheffield S6 1RQ United Kingdom

tel: +44 (0) 114 285 3376 email: [email protected] jenx.com

For your local Product Advisor go to jenx.com/contact-us/product-advisors

Printed on Recycled Paper

Working Towards ISO14001

jenx.com 2010 / 2011

Documents

Jenx Catalogue 2011