JIG CLAMPING AND TOOLS จิ๊ก แคล้มป์ · ตะไบ Ji Clampin Tools จิ๊ก แคล้มป์ Rer Polishin เครื่องมือยางัด

396 Mechanic Hand ToolsDesigned by JSR GROUP

Copyright © 2015 JSR GROUP, All rights reserved.ห้ามนำาไปเผยแพร่ก่อนได้รับอนุญาติจากทางบริษัท

JIG CLAMPING AND TOOLSจิ๊ก, แคล้มป์

Stamp

เหล็กตอกFilesตะไบ

Jig Clamping & Tools

จิ๊ก แคล้มป์ Rubber Polishing เครื่องมือยางขัด

Drain Cleaning And Inspection

อุปกรณ์เกี่ยวกับท่อระบายนำา้

Diamond Tools

เครื่องมือเพชร

จิ๊กบล็อกTETRAHEDRAL JIG BLOCK (for MC) Economy type

• Quality of material : FC300• Heat treatment: Annealing• Finishing: Machine finishing of floor surface and locater sureface; Machine finising of vertical surface (Self-cutting type)• Low-price type• Machine finishing of bottom surface and edge-locater part• Machining of T- groove, tapping hole etc. is enabled with User’s machine.

(Unit:mm)

Order No. A B H h Weight (g)

BSE3 3515 300 150 350 25 56

BSE4 5025 400 250 500 40 177

BSE5 5530 500 300 550 50 280

BSE6 6045 630 450 600 50 412

BSE8 8050 800 500 800 50 736

จิ๊กบล็อกDIHEDRAL JIG BLOCK (for MC) Economy type

• Quality of material : FC300• Heat treatment: Annealing• Finishing: Machine finishing of floor surface and locater sureface; Machine finising of vertical surface (Self-cutting type)• Low-price type• Machine finishing of bottom surface and edge-locater part• Machining of T- groove, tapping hole etc. is enabled with User’s machine.

(Unit:mm)

Order No. A B H h Weight (g)

BRE3 2815 300 150 280 25 67

BRE4 5025 400 250 500 40 239

BRE5 5525 500 250 550 50 327

BRE6 7025 630 250 700 50 511

BRE8 8040 800 400 800 50 822

จิ๊กบล็อกTETRAHEDRAL CROSS FORM JIG BLOCK(for MC) Standard type

• Quality of material : FC300• Heat treatment: Annealing• Finishing: Machine finishing of floor surface and locater sureface; Machine finising of vertical surface (Self-cutting type)• Machining of trihedral surface of the work is enabled with one and the same chuck.

(Unit:mm)

Order No. A B B2 H h Weight(g)

BCS4 5010 400 300 100 500 50 204

BCS4 5015 400 300 150 500 50 201

BCS5 6015 500 400 150 600 50 325

BSC5 6020 500 400 200 600 50 334

BSC6 7020 630 450 200 700 50 468

BSC6 7025 630 450 250 700 50 480

SUBTABLE (for MC) Standard type

• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing• Optimal plate as a jig for MC machining (with holes for attaching 4-M16)

(Unit:mm)

Order No. A H Weight (g)

PSS440 400 40 44

PSS450 400 50 55

PSS540 500 40 70

PSS550 500 50 87

PSS640 630 40 111

PSS650 630 50 139

SUBTABLE (for MC) Cross T-Slot type

• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing

(Unit:mm)

Order No. T-Slot A HT-SlotPitch

Weight (g)

PST 470C 18 400 70 80 61

PST 570C 18 500 70 100 99

PST 680C 18 630 80 125 194

PST 890C 18 800 90 160 364

ANGLE PLATE (for MC) T-Slot type

• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding / machine finishing (Self-cutting type)

(Unit:mm)

Order No. Finish T-Slot A H WT-SlotPitch

Weight (g)

APT 4040CS

G

18x4 400 400 290 80 92

APT 5050CS 18x4 500 500 340 100 146

APT 6363CS 18x5 630 630 390 100 228

APT 4040C

M

18x4 400 400 290 80 92

APT 5050C 18x4 500 500 340 100 146

APT 6363C 18x5 630 630 390 100 228

เซ็ตติ้งบล็อกSETTING BLOCK (for MC) Standard type

• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing• To be widely used for built-in jig, steel parallel, measurement, marking-off, etc

(Unit:mm)

Item No. W H L Weight (g)

SB 100S 100 100 150 7.0

SB 125S 125 125 200 14.5

SB 150S 150 150 250 26.0

SB 200S 200 150 300 37.5

เซ็ตติ้งบล็อกSETTING BLOCK (for MC) Thread type

• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing

(Unit:mm)

Item No. W H L SS

pitchWeight

(g)

SB 100T 100 100 150 36 30 6.2

SB 125T 125 125 200 56 30 13.0

SB 150T 150 150 250 80 30 23.3

SB 200T 200 150 300 132 30 33.1

Mechanic Hand Tools 397Designed by JSR GROUP Copyright © 2015 JSR GROUP, All rights reserved.ห้ามนำาไปเผยแพร่ก่อนได้รับอนุญาติจากทางบริษัท


Stamp

เหล็กตอก Files ตะไบ

Rubber Polishing เครื่องมือยางขัด

Drain Cleaning And Inspection อุปกรณ์

เกี่ยวกับท่อระบายน้ำา

Diamond Tools



จิ๊ก แคล้มป์

JIG PLATE T-Slot type• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing

(Unit:mm)

Order No. T-Slot W L HT-Slot Pitch

Weight (g)

PJT 3065C 18x3 300 650 70 80 85PJT 3580C 18x4 350 800 75 80 131PJT 4190C 18x5 410 900 75 80 172PJT 41110C 18x5 410 1,100 80 80 226PJT 4590C 18x5 450 900 75 80 191PJT 45110C 18x5 450 1,100 80 80 252PJT 50100C 18x5 500 1,000 80 100 257PJT 50110C 18x5 500 1,100 80 100 283PJT 55120C 18x5 550 1,200 80 100 343PJT 55130C 18x5 550 1,300 80 100 372PJT 60120C 18x5 600 1,200 80 125 378

JIG PLATE Cross T-Slot type• Quality of material: FC300• Heat treatment: Annealing• Finishing: Grinding finishing

(Unit:mm)

Order No. T-Slot W L HT-Slot Pitch

Weight (g)

PJTC 3065C 18x6x3 300 650 70 100x80 78PJTC 3580C 18x7x4 350 800 75 100x80 122PJTC 4190C 18x8x5 410 900 75 100x80 160PJTC 41110C 18x7x5 410 1,100 80 150x80 216PJTC 4590C 18x8x5 450 900 75 100x80 178PJTC 45110C 18x8x5 450 1,100 80 125x80 239PJTC 50100C 18x8x5 500 1,000 80 125x100 242PJTC 50110C 18x7x5 500 1,100 80 150x100 270PJTC 55120C 18x8x5 550 1,200 80 150x100 326PJTC 55130C 18x8x5 550 1,300 80 150x100 355PJTC 60120C 18x8x5 600 1,200 80 150x125 359

สเต็ปแคล้มป์ชุดSTEP CLAMP KIT

Set Contents

Order No. T-SlotedStud bolt

TS-SetStepped clamp

1 set eachStepped block

2 sets eachSet weight

(g)S1008CK 10 M8 1008TS 25S38

40S3860S38

1S2S3S

6.25S1210CK 12 M10 1210TS 7.05S1410CK 14 M10 1410TS 7.26S1412CK 14 M12 1412TS

25S1240S1260S12

8.63S1612CK 16 M12 1612TS 8.70S1614CK 16 M14 1614TS 9.90S1814CK 18 M14 1814TS 10.10S1816CK 18 M16 1816TS 25S58•40S58•60S68 11.751612CK 16 M12 1612TS 25S12

40S1260S12

4S5S6S

15.501614CK 16 M14 1614TS 15.301814CK 18 M14 1814TS 15.50

1816CK 18 M16 1816TS 25S5840S5860S58

18.10

2016CK 20 M16 2016TS 18.20

2018CK 20 M18 2018TS40S3460S3480S34

22.352218CK 22 M18 2218TS 22.502220CK 22 M20 2220TS 24.452420CK 24 M20 2420TS 24.55

เพลนแคล้มป์ชุดPLANE CLAMP KIT

Set Contents

Order No.T

SlotedStud bolt

TS-SetStepped clamp

1 set eachStepped block

2 sets eachPin wrench(2pieces)

Set weight(g)

P1210CK 12 M10 1210TS 25P38•40P38•60P38FS70S PW355

6.92

P1412CK 14 M12 1412TS 25P1240P1260P12

8.58

P1614CK 16 M14 1614TS

FS100S PW406

11.36

P1816CK 18 M16 1816TS 25P5840P5860P58

13.16

P2016CK 20 M16 2016TS 13.25

P2018CK 20 M18 2018TS 40P3460P3480P34

18.08

P2220CK 22 M20 2220TS 19.76




Stamp






Diamond Tools


ชุดน๊อตตัวที และสตัดโบลท์T-SLOT NUT AND BOLT SET

Set Contents

Order No. T-Sloted Stud bolt T-Slot nut Flange nut Coupling nutSet weight

(g)1008TS 10 M8 1008 TN 8MFN 8MCN 2.001210TS 12 M10 1210 TN 10MFN 10MCN 2.751410TS 14 M10 1410 TN 10MFN 10MCN 2.951412TS 14 M12 1412 TN 12MFN 12MCN 3.901612TS 16 M12 1612 TN 12MFN 12MCN 3.951614TS 16 M14 1614 TN 14MFN 14MCN 5.00

1814TS 18 M14 1814 TN 14MFN 14MCN 5.20

1816TS 18 M16 1816 TN 16MFN 16MCN 6.90

2016TS 20 M16 2016 TN 16MFN 16MCN 6.95

2018TS 20 M18 2018 TN 18MFN 18MCN 8.45

2218TS 22 M18 2218 TN 18MFN 18MCN 8.60

2220TS 22 M20 2220 TN 20MFN 20MCN 10.25

2420TS 24 M20 2420 TN 20MFN 20MCN 10.30

สกรูซัพพอร์ตSCREW SUPPORT (with Round nut)

• Please use support chip in working for up-down surface and different shaped.• In case of useing by accumulating support, you must ude the joint cap.

(Unit:mm)

Order No.

StrokeB ~ C

ØD ØF HAllowable load

kNWeight (kg)

(A pair)FS 50S 37 ~ 50 40 35 Tr20x3 80 0.56FS 70S 50 ~ 70 40 35 Tr20x3 80 0.78FS 100S 70 ~ 100 45 40 Tr20x3 80 1.47FS 150S 100~150 50 45 Tr25x4 150 2.65FS 250S 150~250 60 50 Tr32x5 200 5.64FS 300S 200~300 60 50 Tr32x5 200 7.17

สกรูซัพพอร์ตSCREW SUPPORT for Big machine

• It is convenient to work for clamping with big and tall work.

(Unit:mm)

Order No.

StrokeB ~ C

ØD ØF GAllowable load kN

Weight (kg)(A pair)

FS 400T 300~400 70 60 M36x4 300 6.1FS 500T 400~500 70 60 M36x4 300 6.8FS 600T 500~600 70 60 M36x4 300 8.6FS 700T 600~700 70 60 M36x4 300 9.7FS 800T 700~800 70 60 M36x4 300 10.5

สกรูซัพพอร์ตMAGNETIC SCREW SUPPORT (with Round nut)

• Meet with wide and warp knuring tools.• Because magnetic power is stayed at the bottom of the boddy, power of cutting never attach on there.• Please use support chip for working of up-down surface and different shaped.

(Unit:mm)

Order No.

StrokeB ~ C

ØD ØF GAllowable load

kNWeight (kg)

(A pair)MSS 50 40~50 45 35 Tr18x2 80 0.72MSS 65 50~65 45 35 Tr18x2 80 0.95MSS 85 65~85 45 35 Tr20x3 80 1.25MSS 110 85~110 45 40 Tr25x4 150 1.65MSS 165 110~165 50 45 Tr25x4 150 2.73MSS 265 165~265 60 50 Tr32x5 200 6.10

สกรูซัพพอร์ตSCREW JACK for Pressing machine

• The receiving flat head (ØD) is made larger for pressing machine. (FS70P is not attached with lock nuts)

(Unit:mm)

Order No.

StrokeB ~ C

ØD GAllowable load

kNWeight (kg)

(A pair)FS 70P 50~70 60 M40x4 400 0.97FS 100P 70~100 60 M40x4 400 1.40FS 150P 100~150 70 M44x4 600 2.75FS 200P 150~200 80 M52x4 800 5.20



Stamp





Diamond Tools




สกรูซัพพอร์ตSCREW SUPPORT CHIP

Order No. Applicable suppotExternal

diametersWeight

(kg)

SST1~6FS50S~FS100S • MSS50~MSS110 Ø25 250

SST7

SST10~60 FS150S~FS300S • MSS165~MSS265 Ø30 460

สกรูซัพพอร์ตSCREW SUPPORT Plain type

• The low friction caontact face obtained by setting the steel ball on the deck allows for low force smooth adjustment.

(Unit:mm)

Order No.

StrokeB ~ C


kNWeight (kg)

(A pair)FS 30 30~40 40 40 TM25x3 40 0.25FS 40 40~50

49 49 TM32x360 0.47

FS 50 50~62 80 0.65FS 60 60~78 100 0.73FS 80 80~105

63 63 TM40x4 160

1.60FS 90 90~125 1.80FS100 100~145 1.90FS130 130~200 2.60FS160 160~260 3.20

สกรูซัพพอร์ตSCREW SUPPORT Hatched type

• The surface of the deck is finished with deep-grooved spirals

(Unit:mm)

Order No.

StrokeB ~ C


kNWeight (kg)

(A pair)FK 30 30~40 40 40 TM25x3 40 0.25FK 40 40~50

49 49 TM32x360 0.47

FK 50 50~62 80 0.65FK 60 60~78 100 0.73FK 80 80~105

63 63 TM40x4 160

1.60FK100 100~145 1.90FK130 130~200 2.68FK160 160~260 3.28

สกรูซัพพอร์ตSCREW SUPPORT Centering type

• Convenient for centering operation for unevenly processed object such as rough surface.

(Unit:mm)

Order No.

H Stroke ØD ØF G Allowable load kN Weight (kg)

FJ 60 75~93 24 49 TM32x3 100 0.70FJ 80 100~125

30 63 TM40x4 1601.60

FJ 100 120~165 1.90

สกรูซัพพอร์ตSCREW SUPPORT Screw type

• Optimal for using with the body of uni- clamps (TPS•TPU•FGB and FPB-B).• Spherical bag-shaped surface of swivel nut enables a slant in front, back, left and right directions up to 6 degree.

(Unit:mm)

Order No. H ØD d B Allowable load kN Weight (kg)FR 10 48 35 M10 5 11 80FR 12 60 40 M12 6 16 117FR 16 78 50 M16 8 28 240FR 20 94 60 M20 10 37 445

สเต็ปบล็อคSTEPPED BLOCK (Tiered type)

• It is a convenient step to get 6 phased height by altering the vertical and horizontal direction.• The round face connected to clamping fittings enables good clamping fitness even on slightly slanted bodies.

Order No. W6-phased changeable hight dimensions Weight

(kg)h1 h2 h3 h4 h5 h6

FW 40 40 10 22 34 16 28 40 0.27

FW 50 50 13 28 43 20 35 50 0.47

FW 80 80 20 44 68 32 56 80 1.58




Stamp






Diamond Tools


สเต็ปบล็อคชุดฐานแม่เหล็กSTEPPED BLOCK with Magnet (Step type)

• Optimal for vertical- and horizontal- type jigs• The Block has a magnet built in the bottom, so it is free from accretion of swarf.

(Unit:mm)

Order No.

A B C D ~ E Allowable load kNWeight (kg)

(A pair)M1S 29 17 25 19~46 132 0.10M2S 45 27 25 28~68 210 0.27M3S 98 57 25 58~150 462 1.00M4S 59 35 38 36~90 417 0.60M5S 98 57 38 58~150 694 1.57M6S 139 81 38 82~210 990 3.08M7S 59 35 50 36~90 555 0.83M8S 98 57 50 58~150 926 2.00M9S 139 81 50 82~210 1,325 4.00

*Withstand loads are indicated for Fig.2, and are reduced by about 50% for Fig.3.

สเต็ปบล็อคSTEPPED BLOCK (Step type)

• Optimal for using in combination with stepped clamp and for adjusting the heigt with a two piece set.

(Unit:mm)

Order No.

A B C D ~ E Allowable load kNWeight (kg)

(A pair)1S 29 17 25 19~46 132 0.112S 45 27 25 28~68 210 0.273S 98 57 25 58~150 462 1.004S 59 35 38 36~90 417 0.625S 98 57 38 58~150 694 1.596S 139 81 38 82~210 990 3.097S 59 35 50 36~90 555 0.828S 98 57 50 58~150 926 2.109S 139 81 50 82~210 1,325 4.02

*Withstand loads are indicated for Fig.2, and are reduced by about 50% for Fig.3.

สเต็ปแคล้มป์STEPPED CLAMP

• The combination with a stepped block (Step type) enables easy height adjustment.

(Unit:mm)

Order No.

A B C D E F Allowable load kNWeight (kg)

(A pair)25S 38 12 25 63 10.6 18 19

M100.19

40S 38 16 25 100 10.6 25 38 0.4460S 38 19 30 150 10.6 30 50 0.9725S 12 12 32 63 14.2 20 14

M12M14

0.1940S 12 19 32 100 14.2 28 32 0.6560S 12 22 32 150 14.2 32 50 1.3625S 58 16 32 63 17 22 12

M160.31

40S 58 19 38 100 17 31 26 0.8060S 58 22 38 150 17 34 48 1.4240S 34 19 38 100 21 31 28

M18M20

0.7160S 34 25 38 150 21 38 44 1.5080S 34 25 50 200 21 40 65 2.8760S 10 30 50 150 25 43 38

M22M24

2.4080S 10 32 50 200 25 50 58 3.4710S 10 38 50 250 25 52 76 5.20

สเต็ปแคล้มป์STEPPED CLAMP

(Unit:mm)

Order No.

A B C D E F Allowable load kNWeight (kg)

(A pair)25P 38 12 25 63 10.6 18 19

M100.19

40P 38 16 25 100 10.6 25 38 0.4260P 38 19 28 150 10.6 30 50 1.0925P 12 12 32 60 14.2 20 14

M12M14

0.2540P 12 19 32 100 14.2 28 32 0.6360P 12 22 32 150 14.2 32 50 1.1725P 58 16 32 63 17 22 12

M16

0.3140P 58 19 38 100 17 31 26 0.7760P 58 22 38 150 17 34 48 1.4080P 58 25 50 200 17 48 58 2.9140P 34 19 38 100 21 31 28

M18M20

0.7160P 34 25 38 150 21 38 44 1.4780P 34 25 50 200 21 40 65 2.7910P 34 38 50 250 21 52 76 5.3760P 10 30 50 150 25 43 38

M22M24

2.3280P 10 32 50 200 25 50 58 3.3710P 10 38 50 250 25 52 76 5.09



Stamp





Diamond Tools




สเต็ปแคล้มป์STEPPED CLAMP with Thread hole

(Unit:mm)

Order No. A B C D E GAllowable

bolt

K Applicableswivel bolt

Weight (kg)

TPS 103 19 38 100 25 22 14.2 M12M14

CHS5000 0.43TPS 104 19 38 150 25 38 14.2 CHS5000 0.67TPS 105 25 50 100 30 22 17

M16CHS6000 0.75

TPS 106 25 50 150 36.5 32 17 CHS6000 1.18TPS 107 25 50 175 36.5 38 17 CHS6000 1.41TSP 108 30 50 150 39 25 21

M18M20

CHS7000 1.37TSP 109 30 50 175 39 32 21 CHS7000 1.63TSP 110 30 50 200 39 38 21 CHS7000 1.88TSP2420 38 50 200 50 43 25

M22M24

CHS8000 2.20TSP2425 38 50 250 50 70 25 CHS8000 2.74TSP2430 38 50 300 50 93 25 CHS8000 3.38

ยูแคล้มป์U-CLAMP with Thread hole

(Unit:mm)

Order No. A B C D FAllowable

bolt

K Applicableswivel bolt

Weight (kg)

TPU200 19 38 100 60 14.2 M12M14

CHS4000 0.40TPU202 19 38 150 88 14.2 CHS4000 0.59TPU204 25 50 100 60 17

M16CHS6000 0.69

TPU206 25 50 150 87 17 CHS6000 1.10TPU208 30 50 150 88 21 M18

M20CHS7000 1.20

TPU210 30 50 200 125 21 CHS7000 1.62TPU2420 45 60 200 93 25

M22M24

CHS8000 3.16TPU2425 45 60 250 120 25 CHS8000 3.99TPU2430 45 60 300 143 25 CHS8000 4.87

ยูแคล้มป์U-CLAMP (U-shaped type)

(Unit:mm)

Order No. Applicable bolt b T L B Weight (kg)

FUB12B M12 13 20 100 87 40 0.37FUB16B M16 17 23 150 134 50 0.75FUB20B M20 21 27 200 181 60 1.41FUB24B M24 26 32 250 228 70 2.33

ยูแคล้มป์U-CLAMP (Plain type)

• It is combination to use the screw support (FR 10~20) with the screw hole on the rear part.

(Unit:mm)

Order No.Applicable

boltb d T L 1 2 B

Weight (kg)

FPB10B M10 10.5 M10 13 80 15 30 30 0.15FPB12B M12 13 M12 15 100 21 40 40 0.34FPB16B M16 17 M16 20 125 26 45 50 0.66FPB20B M20 21 M20 25 160 30 60 60 1.21

ยูแคล้มป์U-CLAMP (Flexible type)

• Round shape of the washer and the body face enables firm tightening of products.

(Unit:mm)

Order No.Set contents

Hex.nutBody and

flex.washerStud bolt T-slot nut

Set weight (kg)

FT 10 FTU 10 FTBZ 10 FTN 10100 FTS 1012 0.27FT 12 FTU 12 FTBZ 12 FTN 12125 FTS 1214 0.50FT 14 FTU 14 FTBZ 14 FTN 14150 FTS 1416 0.86FT 16 FTU 16 FTBZ 16 FTN 16150 FTS 1618 0.93FT 18 FTU 18 FTBZ 18 FTN 18175 FTS 1820 1.92FT 20 FTU 20 FTBZ 20 FTN 20180 FTS 2022 2.05FT 22 FTU 22 FTBZ 22 FTN 22200 FTS 2226 3.62FT 24 FTU 24 FTBZ 24 FTN 24250 FTS 2428 4.02

ยูแคล้มป์U-CLAMP

(Unit:mm)

Order No.

A B C F G H Allowable load Weight (kg)

(A pair)

UC 4 19 45 114 77.5 Ø14 17 M14 • M16 0.78UC 6 22 50 167 125 Ø17 17 M16 1.50UC 8 28 60 221 170 Ø21 21 M18 • M20 3.02UC 10 32 70 274 215 Ø24 25 M22 • M24 5.32




Stamp






Diamond Tools


แคล้มป์ 2อันชุดSWIVEL NEW CLAMP

• Free adjustable on the hight of clamp.• Damage of table by machine can be protected by swibel pad on the both edges of clamp.

(Unit:mm)

Order No.

A B C D E F G HT-sloted

bolt JFlange

nut

Weight (kg)

(A pair)NC 50 75 17 114 36.5 47.5 84 42 46.5 TBM12125 12MFN 1.57NC 60 85 20 146 32 78 110 49 54.5 TBM16150 16MFN 2.68NC 80 105 25 189 48 109 157 55 61.5 TBM20175 20MFN 4.99

แคล้มป์พร้อมแหวนBODY and FLEX. WASHER

(Unit:mm)

Order No.Applicable

boltSet weight

(kg)FTBZ 10 M10 0.18FTBZ 12 M12 0.35FTBZ 14 M14 0.62FTBZ 16 M14 • M16 0.61FTBZ 18 M18 1.43FTBZ 20 M18 • M20 1.42FTBZ 22 M22 2.78FTBZ 24 M24 2.76 FTBZ 4.5 M14 • M16 0.33

แคล้มป์ 2อันชุดTWIN CLAMP

• Secure clamping is available even if the main body is slanted sideways (max. 30 degrees).• Washer is ball-shaped to fit in the main body. Washer (bolt) can be set at two positions, gaining four different dimensions from the end of the main body.• The main body and washer are forged to be robust.

(Unit:mm)

Order No.

BodyFlex.

washerHeavy

nutT-Slot bolt H

Weight (kg)(A pair)

TW12 FQB12 FQZ12 12MHN TBM12125 0~43 1,12TW16 FQB16 FQZ16 16MHN TBM16150 0~53 2,22TW20 FQB20 FQZ20 20MHZ TMB20175 0~71 4,77

แคล้มป์CLAW CLAMP (for Injection machines)

• This product is manufactured and designed as optimal clamp to specially install the molds for injection machines. • Also it is possible to use as a clamping fitting for press.

(Unit:mm)

Order No.

dStroke

HB B1 D L L1 S

Weight (kg)

FL 12 M12 15~35 38 13 39 100 48 75 19 0.75FL 16 M16 18~42 45 17 39 125 69 90 24 1.10FL 20 M20 22~50 56 21 48 160 90 110 30 2.13

ยูนิแคล้มป์UNI-CLAMP (Duck shaped type)

(Unit:mm)

Order No.

b d H T L B Allowable load Weight

(kg)FGB 12 13 M12 32 17 125 63 36 M12 0.38FGB 16 17 M16 40 21 160 80 48 M14•M16 0.88FGB 20 21 M20 50 26 200 100 59 M18•M20 1.65FGB 24 26 M24 63 33 250 125 70 M22•M24 2.90



Stamp





Diamond Tools




สตัดโบลท์STUD BOLT

(Unit:mm)

Order No. ØD LWeight

(g)Remark

SBM 850

M8P=1.25

50 22 18860 60 22 22870 70 30 23875 75 30 248100 100 32 368125 125 32 458150 150 32 548175 175 32 638200 200 32 72

SBM 1050

M10P=1.5

50 22 271060 60 22 321070 70 30 371075 75 30 401090 90 32 4810100 100 32 5310120 120 32 6310125 125 32 6610150 150 32 8010175 175 32 9310200 200 32 106

SBM 1250

M12P=1.75

50 22 381260 60 22 461270 70 30 521275 75 30 561280 80 30 601290 90 30 6812100 100 38 7512110 110 38 8312120 120 38 9012125 125 38 9412140 140 38 10812150 150 38 11312160 160 38 12112175 175 38 13112200 200 38 150

SBM 1450

M14P=2.0

50 22 481475 75 30 7514100 100 38 10114125 125 38 13014150 150 38 16014175 175 38 19014200 200 38 21714225 225 50 24614250 250 50 27414300 300 50 33514350 350 50 39514400 400 50 45514450 450 50 52414500 500 50 576

SBM 1650

M16P=2.0

50 22 681660 60 22 821670 70 30 941675 75 30 1011680 80 30 1081690 90 30 12216100 100 38 13516110 110 38 14916120 120 38 16216125 125 38 16916130 130 38 17616140 140 38 18916150 150 38 20316160 160 38 21716170 170 38 22916175 175 38 236

(Unit:mm)


(g)Remark

SBM 16180

M16P=2.0

180 38 24316190 190 38 25716200 200 38 27016225 225 50 30416250 250 50 33816275 275 50 37116300 300 50 40516350 350 50 42316400 400 50 54016450 450 50 60816500 500 50 675

SBM 1875

M18P=2.5

75 30 13518100 100 38 18018125 125 50 22518150 150 50 27018175 175 50 31518200 200 50 36018225 225 50 40518250 250 50 45018300 300 50 54018350 350 50 63018400 400 50 72018450 450 50 81018500 500 50 900

SBM 2075

M20P=2.5

75 30 15820100 100 38 21020120 120 50 25220125 125 50 26320130 130 50 27420150 150 50 31520170 170 50 35720175 175 50 36820180 180 50 37820200 200 50 42020225 225 50 47320250 250 50 52520275 275 50 57820300 300 50 63020350 350 50 73520400 400 50 84020450 450 50 94520500 500 50 1,050

SBM 2275

M22P=2.5

75 30 19522100 100 38 26022125 125 50 32522150 150 50 39022175 175 50 45522200 200 50 52022225 225 50 58522250 250 63 65022300 300 63 78022350 350 63 91022400 400 63 1,04022450 450 63 1,17022500 500 63 1,300

SBM 2475

M24P=3.0

75 30 20324100 100 38 27024125 125 50 33824150 150 50 40524175 175 50 47324200 200 50 54024225 225 50 60824250 250 63 67524300 300 63 81024350 350 63 945

(Unit:mm)


(g)Remark

SBM 24400 M24P=3.0

400 63 1,08024450 450 63 1,21524500 500 63 1,350

SBM 30200

M30P=3.5

200 50 1,17030225 225 50 1,31630250 250 63 1,30030275 275 63 1,43030300 300 63 1,56030350 350 63 1,82030400 400 63 2,08030450 450 63 2,34030500 500 63 2,600




Stamp






Diamond Tools


(Unit:mm)

Order No. ØD L 2

Weight(g)

Remark

FTN 850

M8P=1.25

50 25

10.5

16875 75 45 248100 100 60 338125 125 75 428150 150 80 518175 175 100 598200 200 100 69

FTN 1050

M10P=1.5

50 25

12.5

251075 75 45 381090 90 50 46

• 10100 100 60 5110115 115 60 5910125 125 75 6510140 140 75 7410150 150 80 8010175 175 100 9310200 200 100 107

FTN 1250

M12P=1.75

50 22

14.5

361265 65 30 481275 75 45 541280 80 45 5912100 100 60 75

• 12125 125 75 9412150 150 80 11612175 175 100 13212200 200 100 155

FTN 1450

M14P=2.0

50 22

16.5

501475 75 45 7414100 100 60 10014125 125 75 127

• 14150 150 90 15314175 175 90 18114200 200 100 21114225 225 100 24214250 250 100 27314300 300 100 33514350 350 100 39814400 400 100 461

FTN 1675

M16P=2.0

75 45

18.0

9816100 100 60 13216125 125 75 167

• 16150 150 90 20516175 175 90 24316200 200 100 28016225 225 100 31916250 250 100 35816300 300 100 43816350 350 100 51616400 400 100 59316450 450 145 67216500 500 145 750

FTN 1875

M18P=2.5

75 35

22.0

12518100 100 60 16618125 125 75 21018150 150 90 265

• 18175 175 90 31018200 200 100 34918225 225 100 40018250 250 100 44818300 300 120 53918350 350 120 63418400 400 120 73018450 450 145 82518500 500 145 924

สตัดโบลท์STUD BOLT

(Unit:mm)

Order No. ØD L 2

Weight(g)

Remark

FTN 2075

M20P=2.5

75 35

26.0

15420100 100 60 20820125 125 75 26120150 150 90 31820175 175 90 37820180 180 110 38420200 200 120 42720225 225 145 48420250 250 145 54020300 300 145 66220350 350 145 78420400 400 145 90720450 450 145 1,03020500 500 145 1,155

FTN 2275

M22P=2.5

75 30

29.5

19522100 100 55 26022125 125 75 32522150 150 100 39022175 175 100 45522200 200 120 52022250 250 145 65022300 300 145 780

• 22350 350 145 91022400 400 145 1,04022450 450 145 1,17022500 500 145 1,300

FTN 2475

M24P=3.0

75 30

33.5

21824100 100 55 29424125 125 75 37024150 150 100 450

• 24175 175 100 53324200 200 120 61024225 225 145 68224250 250 145 77424300 300 145 94824350 350 145 1,12024400 400 145 1,30024450 450 145 1,47524500 500 145 1,653



Stamp





Diamond Tools




น๊อตตัวทีT-SLOTED BOLT

(Unit:mm)

Order No.T-

SlotedScrew

diameterA B C D E F G H

Weight(g)

Remark

TBM 1250 12

M12P=1.75

12 12 26 22 7 6 13 50 721275 12 12 12 26 22 7 6 13 75 9012100 12 12 12 26 22 7 6 13 100 10012125 12 12 12 26 22 7 6 13 125 12612150 12 12 12 26 22 7 6 13 150 14212175 12 12 12 26 22 7 6 13 175 16012200 12 12 12 26 22 7 6 13 200 180

TBM 1650 16

M16P=2.0

16 16 32 27 8 8 16 50 1281675 16 16 16 32 27 8 8 16 75 16016100 16 16 16 32 27 8 8 16 100 19216125 16 16 16 32 27 8 8 16 125 22616150 16 16 16 32 27 8 8 16 150 26016175 16 16 16 32 27 8 8 16 175 29416200 16 16 16 32 27 8 8 16 200 328

• It is special bolt made by forging precisly with the best selected carbon material.

(Unit:mm)

Order No.T-

SlotedScrew

diameterA B C D E F G H

Weight(g)

Remark

TBM 1875 18

M18P=2.5

18 18 40 30 11 11 22 75 24818100 18 18 18 40 30 11 11 22 100 29418125 18 18 18 40 30 11 11 22 125 33218150 18 18 18 40 30 11 11 22 150 37418175 18 18 18 40 30 11 11 22 175 41218200 18 18 18 40 30 11 11 22 200 458

TBM 2075 20

M20P=2.5

20 20 40 34 11 11 22 75 27820100 20 20 20 40 34 11 11 22 100 34220125 20 20 20 40 34 11 11 22 125 38820150 20 20 20 40 34 11 11 22 150 44220175 20 20 20 40 34 11 11 22 175 49020200 20 20 20 40 34 11 11 22 200 542

TBM 22100 22

M22P=2.5

22 22 40 38 14 13 27 100 44422125 22 22 22 40 38 14 13 27 125 50622150 22 22 22 40 38 14 13 27 150 57622175 22 22 22 40 38 14 13 27 175 64222200 22 22 22 40 38 14 13 27 200 698

TBM 24100 24

M24P=3.0

24 24 50 44 16 15 31 100 61624125 24 24 24 50 44 16 15 31 125 68824150 24 24 24 50 44 16 15 31 150 76624175 24 24 24 50 44 16 15 31 175 84424200 24 24 24 50 44 16 15 31 200 922

น๊อตตัวทีT-SLOTED NUT

(Unit:mm)

Order No.T-

SlotedScrew

diameterA B C T L

Weight(g)

Remark

1008TN 10 M 8 16.0 6.0 12.0 9.8 23 221210TN 12 M 10 18.0 7.0 14.0 11.7 23 291410TN

14M 10 22.3 8.8 15.9 13.8 28 54

1412TN M 12 22.3 8.8 15.9 13.8 28 501612TN

16M 12 25.5 8.8 15.9 15.9 28 61

1614TN M 14 25.5 8.8 15.9 15.9 28 571814TN

18M 14 28.6 11.1 19.1 17.6 30 85

1816TN M 16 28.6 11.1 19.1 17.6 30 792016TN

20M 16 31.8 11.8 19.1 19.1 30 92

2018TN M 18 31.8 14.1 25.5 19.8 38 155

(Unit:mm)

Order No.T-

SlotedScrew

diameterA B C T L

Weight(g)

Remark

2216TN22

M16 36.1 14.1 25.5 21.8 38 1872218TN M18 36.1 14.1 25.5 21.8 38 1792220TN M20 36.1 14.1 25.5 21.8 38 1672418TN

24M18 38.3 14.1 25.1 23.6 38 192

2420TN M20 38.3 14.1 25.1 23.6 38 1812620TN

26M20 41.3 16.1 25.5 24.8 44 250

2622TN M22 41.3 16.1 25.5 24.8 44 2372822TN

28M22 41.3 17.4 28.5 26.8 50 318

2824TN M24 41.3 17.4 28.6 26.8 50 3053630TN 36 M30 50 22.2 44 35.6 60 688




Stamp






Diamond Tools


น๊อตหน้าแปลนSPHERCAL FLANGED NUT

(Unit:mm)

Order No. A B C D E FWeight

(g)8MSFN M8 19 13 11.5 2 4.5 20

10MSFN M10 22 17 12 2 5 3012MSFN M12 28 19 16 3 6 5414MSFN M14 28 22 16 3 6.5 6316MSFN M16 35 24 18.5 3.5 7 9618MSFN M18 35 27 19 4 7.5 10620MSFN M20 40 30 23.5 4.5 8.5 16122MSFN M22 45 32 27 5 9 20824MSFN M24 45 36 27.5 5.5 9.5 270

น๊อตตัวทีROTARY T-SLOTED NUT

• This nut can be set from the top of T-groove without disturbing the setting of the stud bolt.

(Unit:mm)

Order No.T-

SlotedScrew

diameterA B C T L

Weight(g)

Remark

1208RTN 12 M8 17.5 5.5 12.7 10.8 11.5 141410RTN 14 M10 22.2 8.7 15.8 13.8 13.5 251612RTN

16M12 25.4 8.7 15.8 15.8 15.5 33

1614RTN M14 25.4 8.7 15.8 15.8 15.5 281814RTN

18M14 28.5 11.1 19.0 17.5 17.5 50

1816RTN M16 28.5 11.1 19.0 17.5 17.5 432016RTN 20 M16 31.7 11.9 19.0 19.0 19.5 622218RTN

22M18 36 13.8 25.4 21.7 21.5 97

2220RTN M20 36 13.8 25.4 21.7 21.5 872418RTN

24M18 38.2 14.0 25.4 23.5 23.5 123

2420RTN M20 38.2 14.0 25.4 23.5 23.5 1132622RTN 26 M22 41.3 15.8 25.4 24.7 25.5 1342824RTN 28 M24 41.3 17.5 28.5 26.9 27.5 163

น๊อตหน้าแปลนFLANGED NUT

(Unit:mm)

Order No. A B C D EWeight

(g)Remark

8MFN M8 19 13 12 3 1010MFN M10 22 17 13 3 2112MFN M12 28 19 17 4 3514MFN M14 28 22 17 4 4116MFN M16 33 24 20 5 6018MFN M18 35 27 20 5 7120MFN M20 40 30 25 6 11222MFN M22 45 32 28 6 14724MFN M24 47 36 28 6 17630MFN M30 56 46 30 6 307

หัวน๊อต 6 เหลี่ยมCOUPLING NUT

(Unit:mm)

Order No.

A B CWeight

(g)8MCN M8 13 22 17

10MCN M10 17 25 3412MCN M12 19 29 4714MCN M14 22 32 6816MCN M16 24 36 8418MCN M18 27 41 12620MCN M20 30 45 17222MCN M22 32 48 20024MCN M24 36 57 317Inch size

12CN W1/2 22 32 9058CN W5/8 27 41 16034CN W3/4 32 48 245

Long type(Unit:mm)

Order No.

A B CWeight

(g)FCU8 M8 13 24 18

FCU10 M10 17 30 41FCU12 M12 19 36 57FCU14 M14 22 42 88FCU16 M16 24 46 113FCU18 M18 27 54 165FCU20 M20 30 60 226FCU22 M22 32 66 273FCU24 M24 36 72 392

น๊อต 6 เหลี่ยมHX. NUT

(Unit:mm)

Order No. A B CWeight

(g)FTU8 M8 13 6.5 5

FTU10 M10 17 8 10FTU12 M12 19 10 16FTU14 M14 22 11 23FTU16 M16 24 13 30FTU18 M18 27 15 46FTU20 M20 30 16 58FTU22 M22 32 18 74FTU24 M24 36 19 100



Stamp





Diamond Tools




หัวน๊อต 6 เหลี่ยมSPHERCAL HX. NUT

(Unit:mm)

Order No. A B C RWeight

(g)FBU8 M8 13 12 12 9

FBU10 M10 17 15 15 19FBU12 M12 19 18 17 28FBU14 M14 22 21 20 46FBU16 M16 24 24 22 55FBU18 M18 27 27 25 81FBU20 M20 30 30 27 109FBU22 M22 32 33 30 132FBU24 M24 36 36 32 191

น๊อตHEAVY NUT

(Unit:mm)

Order No. A B CWeight

(g)10MHN M10 17 10 1412MHN M12 19 12 1914MHN M14 22 14 3016MHN M16 24 15 3618MHN M18 27 18 5520MHN M20 30 20 7422MHN M22 32 22 8924MHN M24 36 24 13130MHN M30 46 30 278

แหวนรูเหลี่ยมLARGE SPHERCAL WASHER

(Unit:mm)

Order No. A B CApplicable

boltWeight

(g)FXZ8 23 9.5 3.2 M8 7

FXZ10 28 12 4 M10 13FXZ12 35 14.2 5 M12 28FXZ14 45 16 6 M14 39FXZ16 45 19 6 M16 56FXZ18 45 21 8 M18 70FXZ20 50 23.2 8 M20 87FXZ22 55 25.5 10 M22 119FXZ24 60 28 10 M24 163

แหวนFLAT WASHER

(Unit:mm)


boltWeight

(g)10MFW 22 11 3 M10 712MFW 25 13 3 M12 914MFW 28 15 3 M14 1016MFW 35 17 3 M16 1618MFW 38 19 3.5 M18 2320MFW 40 21 4 M20 2722MFW 44 23 4 M22 3424MFW 50 27 5 M24 5330MFW 60 32 8 M30 122

แหวนFLAT WASHER (Large diameter)

(Unit:mm)


boltWeight

(g)FYZ8 23 8.4 3.2 M8 8

FYZ10 28 10.5 4 M10 15FYZ12 35 13 5 M12 30FYZ14 39 15 6 M14 43FYZ16 45 17 6 M16 61FYZ18 45 19 8 M18 77FYZ20 50 21 8 M20 94FYZ22 55 23 10 M22 144FYZ24 60 26 10 M24 163

แหวนSPHERCAL WASHER

(Unit:mm)


boltWeight

(g)10MSW 22 10.5 7 M10 1612MSW 28 13 9 M12 3314MSW 28 15 9.5 M14 3016MSW 35 17 10.5 M16 5718MSW 35 19 11.5 M18 5320MSW 40 22 13 M20 8424MSW 48 26 15 M24 13530MSW 60 32 18 M30 272

แคล้มป์HOOK CLAMP

A-TYPE• Hook can be automatically raised when the clamp with a spring inside is loosened.

(Unit:mm)

Order No. A B C E F G ØN +0-0.05

StrokeH

Stud boltHeavy

nutWeight

(g)Remark

HCA 1 12 12 23 13 12 20 16 6 SBM850 8MHN 80HCA 2 16 16 31 16 15 39 22 6 SBM12100 12MHN 250HCA 3 17 23 42 22.5 21 58.5 28 7 SBM16125 16MHN 570HCA 4 20 35 50 29 20 59 28 7 SBM16150 16MHN 740




Stamp






Diamond Tools


B-TYPE• Hook can be automatically raised when the clamp with a spring inside is loosened.

(Unit:mm)

Order No. A B C E F G ØN +0-0.05

StrokeH

Cap screwWeight

(g)Remark

HCB 1 12 12 23 13 12 20 16 6 M8x40 100HCB 2 16 16 31 16 15 39 22 6 M12x70 210HCB 3 17 23 42 22.5 21 58.5 28 7 M16x90 500HCB 4 20 35 50 29 20 59 28 7 M16x100 640

C-TYPE• Hook can be automatically raised when the clamp with a spring inside is loosened.

(Unit:mm)

Order No. A B C D E F G ØN +0-0.05

StrokeH

Cap screwWeight

(g)Remark

HCD06 10 13.2 18 18 18 11 19.2 14 7 M6x45 60HCD08 12 14.1 20 20 22 13 20.1 16 7 M8x50 100HCD10 14 17.5 25 24 26 15 29.3 20 7 M10x65 190HCD12 16 22.5 30 28 32 20 39.1 22 7 M12x80 300HCD16 18 29.1 40 36 43.5 25.5 58.7 28 7 M16x110 710

แคล้มป์ชุดHOOK CLAMP STAND SET

B-TYPE SET

D-TYPE SET

(Unit:mm)

Order No. A C D E NStroke

HHook clamp

Weight(g)

HCBS210012 30 16

M12(1.75)

24 22 96~102

HCB2

0.61HCBS211012 30 16 24 22 106~112 0.66HCBS212012 30 16 24 22 116~122 0.72HCBS213012 30 16 24 22 126~132 0.76HCBS214012 30 16 24 22 136~142 0.83HCBS215012 30 16 24 22 146~152 0.88HCBS310012 38 23

M12(1.75)

24 28 97.5~104.5

HCB3

1.10HCBS311012 38 23 24 28 107.5~114.5 1.16HCBS312012 38 23 24 28 117.5~124.5 1.22HCBS313012 38 23 24 28 127.5~134.5 1.28HCBS314012 38 23 24 28 137.5~144.5 1.37HCBS315012 38 23 24 28 147.5~154.5 1.40

(Unit:mm)


HHook clamp

Weight(g)

HCBS210016 30 16

M16(2.0)

28 22 96~102

HCB2

0.63HCBS211016 30 16 28 22 106~112 0.68HCBS212016 30 16 28 22 116~122 0.74HCBS213016 30 16 28 22 126~132 0.79HCBS214016 30 16 28 22 136~142 0.85HCBS215016 30 16 28 22 146~152 0.90HCBS310016 38 23

M16(2.0)

28 28 97.5~104.5

HCB3

1.04HCBS311016 38 23 28 28 107.5~114.5 1.09HCBS312016 38 23 28 28 117.5~124.5 1.15HCBS313016 38 23 28 28 127.5~134.5 1.20HCBS314016 38 23 28 28 137.5~144.5 1.26HCBS315016 38 23 28 28 147.5~154.5 1.31

(Unit:mm)


HHook clamp

Weight(g)

HCDS210012 30 15

M12(1.75)

24 22 96.1~103.1

HCD12

0.70HCDS211012 30 15 24 22 106.1~113.1 0.75HCDS212012 30 15 24 22 116.1~123.1 0.81HCDS213012 30 15 24 22 126.1~133.1 0.86HCDS214012 30 15 24 22 136.1~143.1 0.92HCDS215012 30 15 24 22 146.1~153.1 0.97HCDS310012 38 21

M12(1.75

24 28 97.7~104.7

HCD16

1.31HCDS311012 38 21 24 28 107.7~114.7 1.37HCDS312012 38 21 24 28 117.7~124.7 1.43HCDS313012 38 21 24 28 127.7~134.7 1.49HCDS314012 38 21 24 28 137.7~144.7 1.58HCDS315012 38 21 24 28 147.7~154.7 1.61

(Unit:mm)


HHook clamp

Weight(g)

HCDS210016 30 15

M16(2.0)

28 22 96.1~103.1

HCD12

0.72HCDS211016 30 15 28 22 106.1~113.1 0.77HCDS212016 30 15 28 22 116.1~123.1 0.83HCDS213016 30 15 28 22 126.1~133.1 0.88HCDS214016 30 15 28 22 136.1~143.1 0.94HCDS215016 30 15 28 22 146.1~153.1 0.99HCDS310016 38 21

M16(2.0)

28 28 97.7~104.7

HCD16

1.25HCDS311016 38 21 28 28 107.7~114.7 1.30HCDS312016 38 21 28 28 117.7~124.7 1.36HCDS313016 38 21 28 28 127.7~134.7 1.41HCDS314016 38 21 28 28 137.7~144.7 1.47HCDS315016 38 21 28 28 147.7~154.7 1.52

แคล้มป์HOOK CLAMP



Stamp





Diamond Tools




สไลด์แคล้มป์ 2 อันชุดSLIDE CLAMP (A- type)

• The clamp body included is finished by heat, so very durable.• The edge of jaw is cut, and you push down work to clamp.• Steering way is to push into wrench and screw up, then clamp head is slided by 45 degree to clamp work.

AccessoriesHexagonal key wrench ....................1PCap screw ........................................2PT-sloted nut ......................................3P

Difference :Drive and screw in squeezingsteers stay inside the jaw of the edge.

Order No.Squeezecapacity

Applicable bolt

A B C D E F G H J L M NWeight (kg)

(A pair)Remark

TC 1A 7 M12 22 36 9 28 16 14.5 22 12 11 103 8 6 1.00TC 2A 8 M16 22 36 9 47 28.5 16.5 25 12 11 143 9 6 1.54TC 3A 10 M20 24 46 12 60 35.5 20.5 31 14 12 180 10 8 2.88

สไลด์แคล้มป์ 2 อันชุดSLIDE CLAMP (B- type)

• Please use in case that the height of wirk is too low in side type A and too high in free vise (FV)• Structure and ability are meeting with slide clamp. (A-Type)

AccessoriesHexagonal key wrench ....................1PCap screw ........................................2PT-sloted nut ......................................2P

Never broken due to very strong.Capability enough.


Applicable bolt

A B C D E F G H J L NWeight (kg)

(A pair)Remark

TC 1B 7 M12 22 36 27 28 16 14.5 22 12 11 103 6 1.18TC 2B 8 M16 22 36 30 47 28.5 16.5 25 12 11 143 6 1.67TC 3B 10 M20 24 46 36 60 35.5 20.5 31 14 12 180 8 3.14

ปากกาเลื่อนได้ 2 อันชุดFREE VISE

• In case that work is too big to fix due to vise, please use the free vise.• The bottom of bidy can be used by step key to finish by key pitch.

AccessoriesRound space mouth piece (FVJ) .....A pairFrenge nut (SFN) .............................4PT-sloted bolt (TBM)...........................4PStepped key (FKY) ...........................2PCap screw ........................................2P


Applicable bolt

Applicablekey

A B C D E F G H I J K L WWeight (kg)

(A pair)Remark

FV350 23 M12 FKY16 126 70 70 14.5 29 55 25 6 4.5 5 82 10 19 6.8FV450 28 M16 FKY18 180 85 85 17 36 92 30 8 6 5 98 12 24 13.0FV550 38 M20 FKY20 190 110 105 21 42 89.5 36 10 8 7 125 13 30 21.0




Stamp






Diamond Tools


แคล้มป์PARALLEL TOE CLAMP

• Hook-type clamp with parallel base.• You can clamp while keeping the height of work.• You can do the both way of a head process and a tail process.

(Unit:mm)

Order No.

Squeeze capacity

kNStroke

Cap screw

A B C E G I JWeight

(kg)

TC 30 10 4 M12x55 22.5 15 30 15 50 30 135 1.10TC 40 12 6 M16x65 31.5 24 40 25 63 40 170 2.52TC 50 14 8 M16x70 34.5 27 46 25 63 50 175 3.80

แคล้มป์REVERSE CLAMP

• Hook-type clamp with parallel base.• The most work clamp inside the table is possible. You can clamp to keep the height of work.• You can make the both proscess.

(Unit:mm)

Order No.

Squeeze capacity

kN

StrokeN

Cap screw A B D F G H I J K 0.01 LHB Weight

(kg)

RTC45 10 4 M12 15 16 50 67.5 49 30 22.5 135 45 18 1.05RTC55 12 6 M16 24 17 50 86.5 60 40 31.5 155 55 20 2.26RTC65 14 8 M16 27 20 50 99.5 65 46 34.5 165 65 20 3.16

แคล้มป์PARALLEL WORK STOPPER

• The head is rotating freely to clamp work in any type.• You can use parallel to clamp at the same time.

(Unit:mm)

Order No.

Cap screw

A B D H I J KWeight

(kg)

TC 30S M12x55 15 30 50 15 30 36 135 1.04TC 40S M16x65 24 40 63 25 40 48 170 2.45TC 50S M16x70 27 50 63 25 46 54 180 3.79

แคล้มป์REVERSE WORK STOPPER

• The head is rotating freely, so ,to be able to clamp any shaped of work.• With reverse clamp, the most work clamp inside the table is possible.

(Unit:mm)

Order No.

Cap screw

A B D F H I J K LHB Weight (kg)

RTC 45S M12 15 16 50 60 30 36 125 45 18 0.95RTC 55S M16 24 17 50 79 40 48 150 55 20 2.09RTC 65S M16 27 20 50 92 46 54 160 65 20 2.97

Documents

JIG CLAMPING AND TOOLS จิ๊ก แคล้มป์ · ตะไบ Ji Clampin Tools จิ๊ก แคล้มป์ Rer Polishin เครื่องมือยางัด