View
280
Download
14
Embed Size (px)
DESCRIPTION
Construction Ideas at Work!
Citation preview
INSIDE
SALES - SERVICE - RENTALS
CONSTRUCTION IDEAS AT WORK
TOLL - FREE(800) 874-7415LOCAL(317) 684-7474FAX(317) 684-7484624 S. Missouri StreetIndianapolis, IN 46225Hours: Monday - Friday 6am - 5pm Saturdays - 7am-12pm April thru October
Concrete Accessories.............Precast Supplies....................Forming & Shoring.................Rental Advantages.................Chemicals..............................Equipment.............................Safety....................................Measuring & Layout................Super Slab Package................Decorative Concrete...............Hand Tools............................Power Tools...........................Jobsite Protection..................Water Proofing & Residential..INDOT..................................Masonry................................Partnerships..........................Fasteners & Adhesives............Everyday Jobsite Supplies.......Meet Our Sales Team.............
2-91011-1415-1617-2122-2930-3738-39, 4240-4143-4950-5556-6061-6465-6869-7071-747576-787980
Jobsite Supply Mission Statement
Jobsite Supply’s mission is to be the premier provider of innovative solutions for the construction industry. Our
passion for serving our customers builds lasting partnerships based on honesty and integrity. Our
commitment to our people creates growth and opportunities in an atmosphere of mutual respect.
And our focus on continuous improvement in everything we do drives us to consistently deliver more than expected.
www.jobsitesupply.com
Concrete AccessoriesSafety
Masonry Decorative Concrete
INDOTForming & Shoring
Visit our Web Order Pad @jobsitesupply.com
CONCRETE ACCESSORIES
Page 2 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Plastic Cone Snap Tie
Light Forming
Snap Tie Standard & Heavy
Sure-Snap Hex Head Tie
Tie HolderHair Pin
Flat Ties
Turnbuckle Form Aligner
Adjustable Kicker
Loop Panel Tie, Standard & Heavy
Gang Loop Panel Tie, Standard & Heavy
Gates D Cone Tie
Cam-Lock Bracket & 1-piece Waler Bracket
Frog Leg Bracket & Z Tie Holder
Jahn “A” Bracket
Light Forming
Jahn “C” Bracket
Scaffold Bracket
Sure Guard Rail Post System
Heavy Forming
Coil Tie
Coil Rod1/2” x 12’3/4” x 12’1” x 12’
Thread Bar
Cast Hex Nut & Steel Hex Nut
Wing Nut & Swivel Wing Nut
Hex CouplerCoil & National Course
Coil Bolt
Adjustable Coil Bolt1/2” x 18”1/2” x 24”
Heavy Forming
Flat Washer
Coil Nut & Handle Coil Nut
She Bolt
Inside Tie Rod
Thread Bar She Bolt
Taper Tie
Thread Bar Taper Tie
Heavy Forming / Form Hangers
Wing Nut
Batter Washer
Crimped Pigtail Insert
Nut Washer
Adjustable Weld Angle Bracket
Euro Rod15mm - Hot Rolled20mm - Hot Rolled
Spring Clamp
Formwork Hammer GSType TH 8012
CONCRETE ACCESSORIES
Page 3 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Inserts & Other Accessories Bridge Deck Forming Interior HangersCoil Loop Insert
Expanded Coil Insert
Loop Ferrule Insert
Thin Slab Ferrule Insert
Shelf Angle Insert
Ductile Embed
Flared Coil Loop Insert
Double Flared Coil Loop Inserts
9-Wire (9W)
Rod Clamp
Coil Half Hanger
Rock Anchor
Screw Anchor & Screw Anchor Bolt
Rebar Safety CapDisc 10
Sure Guard Rebar Protective Cap
Pres-Steel Hanger Type 1
Pres-Steel Hanger Type 2 & 7
Pres-Steel Hanger, Type 4
Pres-Steel Hanger Type 1-A
Pres-Steel Hanger
Pres-Steel Hanger Type 4-A & Type 5-A
Bridge Deck Forming Exterior Hangers
Pres-Steel Half Hangers
Adjustable Joist Hanger
Pres-Steel Hook Hanger Type 1B & Type 2B
Ty-Down Half Hanger
Exterior Half Hangers
Coil Rod Hangers
Bridge Deck Forming Exterior Hangers
Adjustable Half Hangers
Fillet Clip & Haunch Carrier
Bridge Overhang Bracket
Bridge Deck Forming
Bridge Overhang Bracket for Deep Girders
Bridge Overhang Bracket (W)
Heavy Duty Bridge Overhang Bracket
Guard Rail Speed Bracket Assembly
Pencil Rod Wedge Clamp
Tensioner for Wedge Clamp
Pencil Rod Spring Clamp
90o Hooked Dowel-In
Page 4 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
CONCRETE ACCESSORIESWire Bar Supports - Plain & Epoxy
Slab Bolster
Plastic Bar Supports (cont.) Paving
Slab Bolster Upper
Beam Bolster
Beam Bolster Upper
Continuous High Chair
Continuous High Chair Upper
Bar Chair
Individual High Chair
Plastic Bar Supports
EZ Chair
Straddle Chair
Tower Chair
Bar Chair
Continuous High Chair
Continuous High Chair - Upper
Slab Bolster Upper
Strongback Slab / Beam Bolster
Rebar Splicing
Dowel Bar Splicing System
Optional Clipped FlangeStandard Flange
Dowel Bar Splicer
Coupler with Flange
Coupler without Flange
Double Ended Dowel-In
180o Hooked Dowel-In
End Anchorage System
Dowel-In Straight
Male End Anchor
Double End Anchor
End Anchor
Wire Baskets (without Dowels)
Expansion Basket
Contraction Basket
Tie Bar Assembly
Dowel Bars
Tie Bars
Dowel Caps
Crimp Type Welded Type
1-1/4” Notch Plastic Caps
Screed Chair Bases
Standard Screed Base
Screed Base with Sand Plate
Joist Type Adjust-able Screed Base
Screed Base for Steel Deck
Screed Bases Drive Type
Cradle Heads (Pipe Holders)
Dot specified Epoxy
Plass Wheel
DSA Double Stud Anchors
CONCRETE ACCESSORIES
Page 5 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Paving (cont.)Screed Key Joint
Paving Stakes
Basket StakeMat Stake
Channel Stake
Fabric Stake
FS Stake MS Stake PS Stake
Visit jobsitesupply.com
for Standard Layouts & Instruction on
How to Build Light Formwork
34CDX 3/4x4/8 CDX Plywood (46BK)12CDX Plywood 1/2” CDX 4ply 4x8 SHT14HBSE Masonite 1/4x48x96 50/Bunk34Douglas Plywood 3/4 Class 1 Doug Fir34HDO Plywood 3/4” HDO 4x8
2416 2x4x16’ SPF #2 or better (294BK)2616 2x6x16’ SPF #2 or better (189BK)
Visit Us Online @ www.jobsitesupply.com
Stock Forming Plywood
Forming Lumber
Anchor Bolts
3/8” X 6” to 1” X 36” Plain & Galvanized Steel
*Quantity Discounts *
Gates D Cone Tie
Cam-Lock Bracket
Frog Leg Bracket
Concrete Accessories
Welded Wire FabricWelded Wire Fabric in 8’x15’ Sheets &
5’x150’ RollsSizes in-stock: 4x4 4/4, 6x6 6/6, 6x6
8/8, 6x6 10/10Call for Delivery to your Job!
Galvanized & Epoxy Coated Available - Call for Quote
Concrete Bricks
4”x1-1/4” x 8” Bricks
Tie Wire & Bar Ties
Coil wire is available in black annealed & bonded plastic coated. Bar ties available in black annealed
& bonded plastic coated.
Bar Ties4” to 12” & bundles of 5000 pieces
Accessories
Wire Reels Rachet Bars
Bar Tie Twisters
Gullwing
Sonotube® Column Forms
• Easier to handle, set, strip & discard.
• Stands strong, even in wet weather
• Superior strength-to-weight properties
• Available in diameters from 6” to 60”
Tie Breaker Tools
Other Forming Accessories
RC6 Adjustable coil tie - use with 1/2” coil rodRH6 Rebar hook for up to #6 rebarFN450 4 1/2” foam nail with metal washer - 100bxFN550 5” foam nail with metal washer - 100bxFN650 6 1/2” foam nail with metal washer - 50bx
CONCRETE ACCESSORIES
Page 6 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
STAY FORM
BT2 Break off tool for simplex/duraform tiesBT10 Tiebreaker heavy duty break off tool
WC 3/4 Wood Chamfer Strip (10)WCC Wood Chamfer CutterWCCB Wood Chamfer Cutter Replacement BladeWC1 1” Wood Chamfer (10’ Strips)WC112 1-1/2” Wood Chamfer (10’)WC12 1/2” Wood Chamfer12HR 1/2” Half Round (Drip Bead) 8’3412R 3/4” Half Round Drip Bead 8’
Wood & Rubber Chamfers
Concrete Chutes
700187 12’ Alum Concrete Chute700188 16’ Alum Concrete Chute700191 20’ Alum Concrete Chute960805 HVY DTY Slurry ChuteCC992F 12’ Concrete ChuteCC996F 16’ Concrete Chute
• Constructed of heavy gauge aluminum
• Reinforced with cross braces & flanged edges
• Durable & lightweight
Form Liners
ST08 thru ST608” thru 60” IN STOCK
Assembled Rebar Cages
*Call for pricing on assembled cages
The Diamond Dowel® System helps you:
• Collect retainage• Reduce call backs• Save labor• Optimize the amount of
steel in a project• Deliver serviceable
slabs-on-ground• Shorten construction
schedules
14DD 1/4” Diamond Dowel System38DD 3/8” Diamond Dowel System
CONCRETE ACCESSORIES
Rebar Fabrication Services @ Jobsite Supply• Custom Cuts & Bends• Custom Fabrication & Pre-Tied Cages to Your Plan Specifications
Custom Rebar Fabrication
We offer custom shapes, assemblies, cages, and
many more designs made out of rebar. Many custom
bends available!
317.684.7474
Page 7 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
One-sided forming made easy.
Loop-Coil™ Ties provide a convenient way to do one-sided forming. Secure lengths of 1/2” coil rod into drilled holes in existing wall with drop-in anchors, rock anchors, epoxy or other means. Then screw on Loop-Coil™ Ties to proper wall thickness & attach to modular panels.• Form walls as thin as 4” • No time consuming cranking out of Plylags after stripping• Leaves minimal mark in surface of wall
Modular Systems - Loop Coil™ Tie (transition tie)
Twister Bull Float Bracket
• Fits 1 3/8” & 1 3/4” push button handles• Universal mounting that fits any 2 or 4 hole bull float without adapter
Tie Wire & Contractor Wire
MMW 16 Gauge Tie Wire
MMWSSSharkskin 16 Gauge Epoxy Coated Tie Wire
Metal Imbeds
Call for Special Pricing
CONCRETE SLAB & FORMING ACCESSORIES
Under Slab Vapor BarrierVapor retarders save time, money and energy by reducing moisture migration under concrete slabs and foundations, and through inner walls and ceilings. We have a wide variety of vapor retarder products to choose from that are readily available.
Raven-10 10mil - 15x200’ Vapor BlockRaven-15 15mil-12x200’ Vapor Block
Vapor TapeFor protective sealing, hanging,
seaming, slicing & patching applications
Eliminate Ineffeciency of Wood Bracing
Steel Forms
Surfaces
Save 30-60% in Labor Costs! The Adjustable Kicker is perfect for jobs such as flyer tables for hi-rise buildings,
monolithich pours, bridge decks, slabs on grade & curbs. It works on all surfaces & can be attached to either wood or steel forms. When the job is done, it detaches & folds down easily.
Page 8 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Polyethylene Sheeting
Available in Clear, Black, Reinforced, Non-reinforced & Flame Retardant Rolls 100’ Long & 1 Mil to 10 Mil Thickness
Pallet Pricing Available
Snap Handles & Bumpcutters
701164Blade Only
1.5”x3.5x16’ Bumpcutter
700524
• 1-3/4” x 6’ aluminum snap handle• Fits bull floats, channel floats & adjustable heads
See page 50 for a full line of Marshalltown Products.
Slab Bolsters & High Chairs
Jobsite Supply stocks Slab Bolsters & High Chairs
to Suit ANY Job
Epoxy Coated Available
Visit jobsitesupply.com
Continuous &Individual
8”-16”
20” Base Length
Adjustable KickerAK-8
CURB FORMING
Page 9 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
The Only Completely Reinforced Forms• Available in sizes from 4’
to 18’ or higher• Self Aligning Forms• Applications: Edge
Forms, Footers, Industrial Slabs, Foundations,
Curbs & Gutters, & Flatwork• Made in the USA
• Tension Winch SL310Radius clips are available in flatbar, rod and PVC pipe styles. Choose from the SL 114 Flatbar, SL 115 3/8” Road, SL 118 3/4” PVC Pipe and the SL 119 1” PVC Pipe
• Stringline SL140The SL 140 stringline features diamond braided polyester with core. Available in blue, fluorescent yellow, orange or white on 1,000’ spools.
• Radius ClipsRadius clips are available in flatbar, rod and PVC pipe styles. Choose from the SL 114 Flatbar, SL 115 3/8” Road, SL 118 3/4” PVC Pipe and the SL 119 1” PVC Pipe.
• Radius MaterialThe SL 151 Flat Fiberglass Bar features no thermal expansion, excellent flex-ibility, and is made in a highly visible yellow color. Made of durable fiberglass, the SL 151 comes in 8’4” and 16’8” lengths.
SL141 Diamond Braided Polyester with Core. Yellow
SL142 Diamond Braided Polyethylene with Core. Yellow
SL143 Diamond Braided Kevlar with Core. Yellow
• Stringline Rods SL110Downward Bend Stringline Rod fetures angled entry slot. Made of cold drawn steel & is corrosion resistant.
• Clamps SL121stringline clamp features teardrop shaped holes, independent clamping capabilities, steelbox construction ALL are corrosion resistant.
MC550• Engine: 15HP
Kohler or 13 HP Honda recoil start
• Available Augers: 6” sold or hollow
• Wheels: (9) 8”x2” hard rubber
• Weight: 760 lb.
4 DEECURB DEE 4 x 10 Straight Curb Form4 DEEFLEX DEE 4 X 10 Flex Form6DEECURB DEE 6 x 10 Straight Curb Form6DEEFLEX DEE 6 x 10 Flex Form8DEECURB DEE 8 x 10 Straight Curb Form8DEEFLEX DEE 8 x 10 Flex Form
SL114 FlatbedSL115 3/8” RodSL118 3/4” PVC PipeSL119 1” PVC Pipe
SL151C Flat Fiberglass Bar ConnectorSL155 3/8” Fiberglass RodSL155C 3/8” Fiberglass Rod Connector
SL122 Clamp with Instanjust® Spring Action, Made of Heat Treated Steel. No Bolts or Wrenches.SL23 Stringline Clamp Features Precision Shaped Holes & Independent Clamping
SL111 Upward BendSL112 Threaded Line w/ Replaceable
Line Tip (SL116)SL116 Plastic Line Tip - Durable Nylon,
Self-Threading
Steel Concrete Forms Accessories
PF4 4” Board x 12PF6 6” Board x 12PFCC Camlock
• Radius Work• Straight Work• Light Weight
• No Nailing• Fast Setup• Easy Cleaning
AT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted
Inverted Spray Paint
Curb Builder
36LATH 36” pine lath stakes48LATH 48” pine lath stakes
Reusable Concrete Flatwork
Super Shim PackRL-67• 1” Thick
Econ-O-Shim®
Stack ShimSS16• For the precast/tilt-up
industry• Comprehensive strength of 10-12,000 PSI • Length 3-1/2”, Width 1-15/16”, Slot 5/8”
DDESLAURIERS
Seamless Steel Slump Cone SCSE7• 8” diameter
base, by 4” top, by 12” height clean, smooth edges
Page 10 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Coil InsertsHundreds of styles & sizes to choose from:• 2-4 Strut Inserts• Loop Inserts• “L” Leg Inserts• Open Coil Inserts• Thin Slab Inserts• Pick-up Inserts• Ductile Coil Inserts• Edge Pick-up Inserts• Locator Plugs• Coil Nut• Flat Washer• Coil Rod & Bolts
Hundreds of styles & sizes to choose from:• Ductile Ferrule Insert• Ferrule Loop Insert• Ferrule Wing Insert• Four Strut Thin Slab• NC Precast Concrete Insert• Open Ferrule insert• Plastic Insert Cup• Standard Ferrule Insert• Straight Loop Ferrule Insert• Threaded Plastic Insert Plug• Thin Slab Parallel, 2-Strut• Thin Slab Ferrule Insert, 2-4 Strut
Ring Lift SystemPopular 2-10T spall free lifting system with a variety of accessories for every application:• Two Hole Anchor• Double-Tee Anchor• Drop Forged Foot Anchor• Plate Anchor• Uni-Anchor• Wavy Tail• Bolt & Wing Nuts Assemblies• Sandwich Panels• Ring Bail or Cable Lifting Hardware• Shear Bars• 2-Hole Erection Anchor• X-Foot Erection Anchor• New Generation Erection Anchor• 22 XL Anchor
Easy Lift SystemSimple economical way to lift barriers, pipes, boxes & slab panels between 4-8” thick:• Original EASY LIFT ANCHOR• 5-Ton Foot Anchor• Foot Anchor with Snap
Wires• Easy Lift 500 Anchor• Magnets & Wet Set Plates
PRECAST PRODUCT LINESFerrule/NC Threaded Inserts
Popular 1-25T spall free lifting system with a variety of accessories for every application:• DB Anchor• DB Eye Anchor• Bolt & Wing Assembly• Face Lift Directional• Hardware• Recess Formers• Rubber Grommets• Shear Bars
DB Anchor Lift System
Pipe BraceGreat for bracing forms when stacking forms for higher walls. The Pipe Brace comes in 3 different lengths to accomodate a wide range of wall heights.
7-1/2’ to 14” Pipe Brace14’ to 23-1/2’ Pipe Brace23’ to 39’ Pipe Brace
• For the precast/tilt-up industry• Comprehensive strength of 10-
12,000 PSI • Length 3-1/2”, Width 1-15/16”,
Slot 5/8”
Many other types of straight & V-style shims are available.
Call your Jobsite Supply representative for more
information.(317) 684-7474
Econ-O-Shim®
Stack ShimSS16
Super Shiim PackRL-67• 1” Thick
FORMING
EZ-GANGFor Straight Walls & Custom ApplicationsEZGang™ is Jobsite Supply’s pre-built system for straight walls. This is a great system for repetitive pour situations where panel width & height stay the same. It is a versatile system that uses she-bolts or taper ties.
• Built To Order • Arrives At The Jobsite Ready To Use• Weighs Only 9Lbs. Per Sq/Ft• Widths Up To 12’-0”• Compatible With All Domestic Form
Systems
JS 1500• Compatible with all Handset
Systems• 1500 PSF• Birch Facing• JS 1500 Panel Makes Column
Forming Easy & Efficient
EZ-Gang Forming System Shown with Trailing Waler Assembly
Page 11 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
EZ-Gang Forming System Atlanta, GA
EZ-Gang Forming System Core Wall System
JS 1500Form Finish with She-Bolt
JS 15002 Ties Per PanelZero Lumber
EZ-RADIUS
FORMING & SHORING
CFP 2000 & UNIPLY• Hinged Corners Increase Production• Premium Birch Facing• Tieless to 36”• Superior Finish• 2000lb SF Rated
• JS MAX• EZ-Shore• Megashore• Titan HV
Page 12 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SHORING SYSTEMSDesigned to Maximize Efficiency & Reduce Materials & Labor
Jobsite Supply provides a wide range of shoring systems that are engineered precisely to your structure & load requirements. Our Systems Approach is focused on providing the most efficient & cost effective system for the job. No two jobs are alike, so our versatile systems & multiple strategic alliances allow us to provide the most suitale solution for each project.
EZ-Shore with HICO Beams
Uniply after Forms Stripped with Liner
CFP 2000Hinged Corner
Increases Production
Titan HV
Ischebeck Megashore
JS-MAX
FORMING
Page 13 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
COMPLETE JOBSITE FORMING &
SHORING SOLUTIONS
Custom Engineering and Fabrication
Precision Pre-Built Forming Systems
Modular Clamping Gang Forming Systems
Water & Sewage Treatment Plant Systems
Commercial / Industrial Structure Specialists
All panels are powder coated. In doing so, the paint is baked into the panel which allows for a long form-life & easy concrete clean up.
Exact corner joints eliminate tolerance build-up over large areas.
Angle struts are spaced on 12” centers to provide strength, uniform concrete & minimize deflection.
Handles are provided on panels for easy handling in setting and stripping forms.
1/2” plywood is riveted to angle struts. Plywood tolerance is closely maintained to assure long form life.
Side & end rails are rolled from 55,000 psi steel & welded continuously at corners for maxi-mum strength.
Rear, side & end rail dados are located at 6” on center to allow optimum accessory location.
Front & rear contact points prevent group seepage & permit true form alignment with adjacent panels.
2” wide angle strut allows for more weld for added strength
Tie Systems
SHORING EQUIPMENT
Page 14 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
EZ-SHORE FRAME - 10K/LEG
Part # Description Weight Std. Pkg.
C412400 2’x4’ “Z DIM” - Locking Spacing 3’ 37.0 25/B
C412500 2’X5’........................................4’ 45.0 25/B
C412600 2’X6’........................................4’ 58.0 25/B
C414400 4’X4’........................................3’ 46.0 25/B
C414500 4’X5’........................................4’ 54.0 25/B
C414600 4’X6’........................................4’ 67.0 25/B
EZ-SHORE FRAMES
DBL. HOLE ANGLE CROSS BRACEPart # Description Weight Std. Pkg.
C024404 3’&4’X4’...........3’&4’ Lock Spacing 11.0 100/B
C024405 3’&4’X5’...........3’&4’ Lock Spacing 13.1 100/B
C024406 3’&4’X6’...........3’&4’ Lock Spacing 15.0 100/B
C024407 3’&4’X7’...........3’&4’ Lock Spacing 16.7 100/B
C024408 3’&4’X7’...........3’&4’ Lock Spacing 18.4 100/B
C024410 3’&4’X10...........3’&4’ Lock Spacing 22.0 100/B
POST SHORES
HICO BEAMS 059, 610, 915, 1119
Part # Description Weight
C024404 3’&4’X4’...........3’&4’ Lock Spacing 11.0
C024405 3’&4’X5’...........3’&4’ Lock Spacing 13.1
C024406 3’&4’X6’...........3’&4’ Lock Spacing 15.0
C024407 3’&4’X7’...........3’&4’ Lock Spacing 16.7
4 1/2”
Cross Section Box Member
9 3/4”
3 1/2”
8 1/4”
Cross Section I Member
Part # Min. Hts Max Hts Weight
PS350 6’-5” 11’-6” 48lbs.
PS550 10’-0” 18’-0” 79lbs.
ClampC88
Screw JackC462400
Hitch PinC442310
RivetC442300
ConnectorC442310
Nail PlateC443100
U-HeadC451189
A-Clamp920
Leg PlateC471000
1’&2’ Tie Bar
Page 15 www.jobsitesupply.com (317) 684-7474 684 S. Missouri St. - Indianapolis, IN 46225
RENTAL ADVANTAGES
Many Items Listed In Our Newspaper Are Available For Rent!
Compare the cost of renting to purchasing on an hours-worked basis and you may discover that renting equipment is more COST EFFECTIVE
for your project.
JOBSITE SUPPLY Rental Advantages
• RIGHT EQUIPMENT FOR THE JOBRight Size, Right Type, Right NOW!
• NO WAREHOUSING OR STORAGEReturn idle equipment to our convenient
downtown location
• CONSERVATION OF CAPITALUse working capital money for more
profitable uses
• DELIVERY & PICKUP AVAILABLEKeep employees working on the job
• REDUCE MAINTENANCE COSTSJobsite Supply staffs trained mechanics
• NEW & LATE MODEL EQUIPMENTRental fleet updated yearly
• CONTROL COSTSKnow your job costs quicker &
eliminate hidden costs
• TRY NEW EQUIPMENT BEFORE BUYINGTake equipment for a “Test Drive”
EQUIPMENT RENTED BY THE DAY, WEEK OR MONTHEXPERIENCE THE RENTAL ADVANTAGE TODAY!
Page 16 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
RENTAL ADVANTAGESWE WILL MEET OR BEAT ANY COMPETITORS
PRICING ON IN FLEET ITEMSRIDING TROWELS
We Service What We Sell...
& Even What We Don’t!CONSTRUCTION IDEAS AT WORK
• In-House Repair Shop & Parts Program •
STAMPS • SCREEDS • CUT-OFF SAWS • GENERATORS • MATERIAL SPREADERS • VIBRATORS • LIGHT TOWERS • PNEUMATICS • ROTO HAMMERS • AND MANY MORE ON OUR WEBSITE
www.jobsitesupply.com
1 Day ServiceStihl Tune-Ups
INCLUDES FILTER, PLUG, FUEL FILTER, ROPE
ONLY $49.95REGULAR $69.95
BRING IN THIS COUPON FOR
10% OFF PARTS & LABOR ON YOUR NEXT VISIT
UP TO $100624 S. Missouri St. - Indianapolis - 46225
SOFF-CUT SAWS GEORGIA BUGGIES PLATE COMPACTORS
PROWLERS GRINDERS WALK-BEHIND TROWELS
CHEMICALS
PRODUCTSFORM RELEASE • JS Super2 • JS Form ReleaseCURING COMPOUNDS• White Cure WaxCURING & SEALING COMPOUNDS• JS Cure & Seal VOC• JS Cure & Seal 25 LV• JS Crystal Clear Cure & Seal-VOC• JS Crystal Clear 30%• JS Crystal Clear Matte• JS Supreme Seal 30% (Sealer Only)• JS Natural Seal • JS Salt Guard Max• JS Salt Guard Cure Seal• JS Honey BrownLIQUID/SEALERS - HARDNERS• JS Salt Guard Max• Ameripolish• Ashford Formula• Diamond Hard - Euclid• L&M - FGS/Permashine SystemCEMENTITIOUS REPAIR PRODUCTS• JS Concrete Quick Fix• JS Epoxy Crack Filler - 818• JS 110 Epoxy Mortar• JS All Patch 5 LT 5m• JS All Patch 20• JS All Patch 20 LT• JS All Patch 20 LT Silver• JS Wallcrete• JS Special Patch w/ Bonding Agent• JS Strong Bond• JS Vertical Patch• JS Quick PatchGROUTS• JS621 Construction Grout• JS1107 Precision Grout• JS 14K Structural GroutFLOOR LEVELERS• JS UniflowRETARDERS / EVAPORATION• JS Aquafilm• JS Aquafilm Concentrate• JS Surface Retarder SURFACE RETARDER• JS Cast Violet 03• JS Cast Light Blue 05• JS Cast Yellow 15• JS Cast Gray 100• JS Surface Retarder
EPOXY COATINGS • JS 015 Epoxy - Tan, Med. Gray,
LT Gray, Clear• JS 137M• JS 137MUV• JS 139 Flexible Epoxy • JS 100LVP High Build Epoxy Primer• JS 707 & 707LV High Build Epoxy• JS 380 Fast Set Epoxy Binder• JS 210 Epoxy Skidproofer• JS 357 PAVOC• Acrylic 7EPOXY SEALERS• 830 Fast Set Flexible Joint Sealant• 829 Flexible Joint Sealant• 821 Fast Set GelEPOXY REPAIR PRODUCTS • JS110 Epoxy Mortar• JS818 Epoxy Crack FillerURETHANES• Urethane Clear (1 & 5 Gallon Units)• JS 356 Pavoc Aliphatic Urethane• JS 030 Waterbased Urethane• JS 358 High Wear Urethane• JS 901 Urethane Cement
SOLVENTS/STRIPPERS• JS Citrox• JS Stripper Remover HD• JS SolventDECORATIVE CONCRETE PRODUCTS• JS Crystal Clear VOC• JS Crystal Clear VOC Matte• JS Supreme Seal VOC• JS Cure Seal VOC• JS Super Grip• JS Solvent• JS Salt Guard Max• JS Liquid Release -
“Bubblegum”• JS Wax Gloss• JS Wax Matte• JS Natural Seal• JS Honey Brown VOCSPECIALTY PRODUCTS• Aluminum Oxide• JS 820 Oil Stop Primer• JS 551 River Rock Binder• JS 901 Urethane Cement• JS Hydro Plug• JS Post Rock• JS Concrete Dressing • Torginol Flakes - 1/4” -
Wombat or Shoreline
Page 17 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
VIEW OR DOWNLOAD
PRODUCT DATA SHEETS AT
jobsitesupply.com
CHEMICALS
Page 18 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
JS Super 2• The best value form release agent anywhere!• Provides easy and clean form stripping. Produces
bright and stain-free concrete surfaces.• Minimizes bugholes and surface defects.• Protects and maximizes life of formwork.• Easy and pleasant to work with.• Prevents concrete build-up from occuring.• Reduces labor costs of form cleaning.• Protects forms from damage and rapid
deterioration.• VOC Compliant.
JS Crystal Clear Cure & Seal• Ideal curing and sealing compound for decorative
concrete to preserve natural look.• Excellent water retention.• Low viscosity for easy application.• Reduces cracking, crazing, spalling and dusting.• Insures optimum strength of cured concrete.• Non-yellowing.• One coat application. Reduces cleaning and
maintenance costs.• Quick drying.• Prevents penetration of most oils and greases.• High solids.STANDARDS• Meets AASHTO-M198, Type 1, Class A & B• Meets ASTM C-309, Type 1, Class A & B• Meets Corps of Engineers CRD-C-300, Type 1• ASTM C-1315, Type 1, Class A
JS All Patch• General purpose, non-shrink, cementitious
patching material.• Designed for horizontal and vertical appliations.• Formulated to be placed in consistencies ranging
from puttty to plastic.• Used for a variety of concrete repairs ie: colums,
beams, slabs, steps, sidewalks, driveways, concrete walls and precast members.
• Can be trowelled into place on both horizontal and vertical surfaces.
• Contains air entraining agents which make it well suited to freeze-thaw resistance.
JS Wall Crete• Resurface and repair vertical concrete
surfaces.• Very fine blend of Portland Cement,
aggregates and admixtures to leave an ultimate smooth finish.
• Light gray color to match existing concrete.
• Leaves a bondable surface for paints or coatings.
• Featheredge - 1/8” thickness.• Excellent bond strength to substrate.• Smooth and creamy workability.
JS1107• High performing precision grout.• CRD C-621; ASTM C-1107, Grade C.• Non-metalic, non-shrink.• High early strength• Placement versatility; drypack; plastic,
flowable and fluid consistencies - pump-able.
• Ideal for precise grouting applications; machinery baseplates, compressors, tanks and installation of anchors and dowels.
JS Special Patch• A two-component, polymer modified,
cementitious repair mortar.• ASTM C-928 - Rapid Hardening Mor-
tar Demonstrates high compressive strengths; ideal overlay or patch for heavy traffic areas.
• Easy-to-use system; no water or measuring needed.
• Accepts foot traffic in 1 hour, heavy traffic in 4 to 6 hours.
TAKE CARE OF YOUR CONCRETE WITH JOBSITE SUPPLY
BRAND CONCRETE CHEMICALS
CHEMICALS
Page 19 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
PARTNERSHIPS
3Mwww.3M.comAdhesives Technologywww.atc.ws
Concrete Anchoring, Epoxies, Dowing, Epoxy Bonding, Concrete Joint Filling, Epoxy Repair, Maintenance/Restoration and Other Specialty Applications.
Americrete www.americrete.com
Decorative Overlays, Water Based Stains and Sealers, Garage Floor Epoxies, Marble Tek Epoxy, Stampable Overlays for Horizontal & Vertical Applications.
Ashford Formulawww.ashfordformula.com
The world’s most widely used concrete densifier.
BASFwww.basf.comSonnebornwww.sonneborn.com
Kure & Seals, SL1, NP1, Bonding Agent, Liquid Hardener, Grout, Patching Compound, Joint Sealants, Caulks, Adhesives, Damproofing and Waterproofing Products.
Brickform a Division of Solomon Colorswww.brickform.comwww.solomoncolors.com
Decorative Products, Concrete Stamps, Color Hardeners, Release Agents, Acid Stains, Liquid Integral Colors, 300 Plus Colors in Stock for Same Day Delivery.
Carlisle Coatings & Waterproofingwww.carlisle-ccw.com
Waterproofing Products, Air and Vapor Barrier, Deck Coating Technologies.
Cetco www.cetco.com
Remedial Waterproofing Products, Waterproofing Systems, Concrete Joint Waterstops, Subsurface Drainagge Products.
Chemmaster Coating Technologieswww.chemmasters.net
DOT Approved Products, Waterproofing Prodcts for Concrete and Masonry.
Diedrich Technologieswww.diedrichtechnologies.com
Environmentally Friendly New Masonry Cleaning, Restoration and Water Repellent Products.
Euclidwww.euclidchemical.com
Curing and Sealing Compounds, Dry Shake Floor Topping, Grouts, Joint Fillers and Sealants, Floor and Deck Treatments
Hill &Griffithwww.grifcote.com
Concrete Form Release Agents, VOC Compliant
ITWwww.itwredhead.com
Concrete Anchoring Solutions, Adhesives, Mechanical, Screw Products.
Kemikowww.kemiko.com
Acid Stains, Waxes, Sealers High Gloss or Flat, “Remebrandt Polymer Stains”.
Laticretewww.laticrete.com
Adhesives, Grouts and Mortars, Waterproofing for Floors and Walls, Leveling Compounds and Wear Surfaces, Concrete Repair Materials.
L&M Chemicalswww.lmcc.com
Form Release Agents, FGS Permashine, FGS Conditioner, Evaporation Retardents, Floor Hardeners, Seal Hard.
LM Scofieldwww.scofield.com
Colored Concrete, Concrete Stain, Stamped Concrete.
Metacaulkwww.metacaulk.com
Firestop and Firestopping Products
Mapeiwww.mapei.us
Waterproofing, Concrete Restoration Systems, Patching and Shimcoating Compounds, Concrete Repair, Self-Leveling Underlayments.
Simpson Strong Tiewww.strongtie.com
Joint/Crack Fillers.
RectorSealwww.rectorseal.com
Firestop Products
Tremco Commercial Sealants & Waterproofingwww.tremcosealants.com
Joint Sealants, Glazing Sealants, Glazing TapesGlazing Extrusions, Fire Protection SystemsBelow-Grade Waterproofing MembranesAir Barriers, Drainage Mats, Deck CoatingsWide Expansion Joints, Primers
Versaflexwww.versaflex.com
Pure Polyureas, Joint Filling, Concrete, Water and Waste Waer, Rapid Curing Sealants and Coatings.
Western Materialswww.westernmaterials.com
DOT Patching Products
WR Meadowswww.wrmeadows.com
Expansion Joint Material, Moisture/Vapor Barrier Products.
Xypexwww.xypex.com
Concrete Crystallization Products, Concrete Waterproofing by Crystallization
CHEMICALS
Page 20 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
GAMMACURE• Curing agent designed
specifically for Xypex Crystaline waterpoofing products.
• May eliminate the need for water during the Xypex coating in some cases
C2000• Unique chemical treat-
ment for the water-proofing & protection of concrete
• Can seal hairline cracks up to 0.4 mm
XM50• Applied as a second
coat over Concentrate, Modified produces a harder finish
• Speeds the curing of Concentrate
XPP66• Formulated as a
crystalline, fast setting, non-shrink, high bond strength, hydraulic cement compound for concrete repairs
• Stops flowing water in seconds
A7 Adhesive Anchoring System
A7L• All weather formula,
down to 0o and below• Fast curing time, 35
min at 60oF• Works in damp holes
and underwater applications
A710• All weather formula,
down to 0o and below• Fast curing time, 35
min at 60oF• Includes nozzle and fits
A100 tool
E24XL Epoxy nozzle 1/2” use with G5 & C6 epoxyE102 Epoxy gun for C6-18oz. or G5-22oz.A100 Epoxy dispensing tool fo ruse with A7-10
Concentrate
Gamma Cure
Modified
Patch n’ Plug
#1 - Level, patch and repair as needed
#2 - Grind to your desired finish
#3 - Harden and densify your polished concrete with FGS/Hardener Plus
#4 - FGS/PermaShine polished concrete. See the results for years
to come.
Call Jobsite Supply for Certified Applicators of FGS PermaShine!
Crackbond LR321 Ultrabond HS-200 Ultrabond 1 Ultrabond 1300 Ultrabond 2100 Ultrabond 2300 Speed Set 2 Ultrabond 365
♦ Lane Tie Repairs ♦ Sound Wall Erecting ♦ Barrier Expansion ♦ Sign Installation ♦ Pile Splicing ♦ Highway Patching
♦ Highway Reflectors ♦ Light Poles ♦ Curb/Sidewalk Repair ♦ Guard Rails ♦ Bridge Construction
FOR ALL THESE APPLICATIONS AND MORE...
INDOT APPROVED EPOXIES: Repair ProductProperty Damage is
Everywhere, Fix it All with 1 Product!
• Fix Loose Rails• Repair Cracks• Bond Broken Concrete
• Repair Spalls/Holes• Fill Control Joints• Fill Bug Holes
MS-2A Patch Material (65lb Bag)MS-2C Antimocrobial Patch (65lb Bag)Plug Water Plug (50lb Pail)Epoxy Strongseal Epoxy 15 Gallon KitProfile Structural Patch (65lb Bag)QSR Hydrolic Cement (40lb Pail)Hi Per Reinforced Patch (65lb Bag)
A9-MB1350HN
Visit us online atwww.jobsitesupply.com
CHEMICALS
Page 21 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Planicrete® AC
Acrylic Latex Admixture for Mortar and Concrete. One-component, concentrated liquid latex admixture
used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, verti-cal and overhead concrete; concrete masonry units (CMU); and masonry surfaces.Packaging: Jug: 1 U.S. gal. (3,79 L)Pail: 5 U.S. gals. (18,9 L)Drum: 55 U.S. gals. (208 L)
Planicrete® UA
Universal Latex Additive.Next-generation, water-based,
one-component, concentratedliquid latex admixture used to enhance the performance of sev-eral MAPEI products, including mortar mixes. Using Planicrete UA as part of the designated design mixes willincrease product performance in the areas of bond, flexural and tensile strengths in addition to increased dura-bility and enhanced workability.
Packaging: Jug: 1 U.S. gal. (3,79 L)Pail: 5 U.S. gals. (18,9 L)
Planitop® 18Fast-Setting, Flowable, One-Component Repair
Mortarone-component, shrinkage-compensated, fast-setting,cementitious repair mortar that is suited for all interior/exterior horizontal concrete repairs, including bridgedeckoverlays, parking-garage floor repairs and varioushorizontal DOT concrete repairs.This product includes High-Hydrated Cement Technology
Packaging: Bag: 50 lbs. (22,7 kg)Pail: 50 lbs. (22,7 kg)
Admixtures
Concrete Repair Mortars
Primers for Self-Leveling
Primer L®
Advanced-Technology Acrylic Latex Primer for ConcreteA concentrated, solvent-free acrylic primer used prior to theinstallation of underlayments and top-ping materials. It isgreen for easy identification. It im-proves the bond between aproperly prepared and profiled concrete substrate, and selflevelingunderlayment or topping materials
Packaging: Pail: 5 U.S. gals. (18,9 L)Jug: 1 U.S. gal. (3,79 L)Primer WE™
Primer WE® Water-Based Epoxy Primer
A two-component, polymer-modified, solvent-freewater-based epoxy primer for enhanced adhesionto nonporous substrates prior to the applicationof MAPEI self-leveling materi-als. When mixed, it
is purple for easy identification. It improves adhesionover smooth, nonabsorbent and difficultto-bond-to substrates such as properly prepared ceramic tile, cement-basedterrazzo, old cutback adhesive residue and approved plywood subfloors.Packaging: Kit: 2 U.S. gals. (7,57 L)Part A, Pail: 5 U.S. gals. (18,9 L)Part B, Pail: 5 U.S. gals. (18,9 L)
Self-Leveling Underlayments
Novoplan® 2
Professional Self-Leveling UnderlaymentHigh-strength, self-leveling, cement-based underlaymentand repair mix for interior concrete and engineer-approvedfloors. Suited for leveling, smoothing and repairing interiorfloors before the installation of floor coverings. Ceramic tileand natural stone can be installed 24 hours after application.
Floor coverings – such as carpet, vinyl sheet goods, vinyl tile, vinyl composition tile (VCT), homogenous PVC, rubber and engineered wood plank – can be installed 1 to 3 days after application, depending upon thickness of application. Packaging: Bag: 50 lbs. (22,7 kg)
Repair ExpoxiesPlanibond® EBA
Epoxy Bonding Agent and PrimerTwo-component, multipurpose epoxy bondingagent and primer. Planibond EBA isnon-shrinking, 100% solids and moistureinsensitive. (Note: This is not a moisturereduction barrier coating.) Planibond EBAis used primarily as a primer
for MAPEI selfleveling materials, and as a bonding agent for screeds and repair mortars, with applications for cor-rosion protection and crack repair. Planibond EBA meets ASTM C881 requirements.Packaging: Kit: 2 U.S. gals. (7,57 L)Part A: 5 U.S. gals. (18,9 L)Part B: 5 U.S. gals. (18,9 L)
Patching & Skim Coating
Mapecem® Quickpatch
Interior/Exterior, Fast-Setting, High-Flow Concrete Patch Versatile, fast setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks andconcrete pads. Mapecem Quickpatch features extraordinary ease of placement, with a variable water ratioand outstanding workability. When used for horizontal substrate repair before application of self-leveling un-derlayments, Mapecem Quickpatch
sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.Packaging: Bag: 40 lbs. (18,1 kg)
Joint Filler & Repair
VersaFlex SL/75 is a self-leveling, 100% solids, flexible, 2 component, rapid curing polyurea elastomer joint filler. Designed for 10-15% movement of installed joint width.
• 100” Solids• Flexible-460-500%
Elongation• Remains Flexible in Cold• Odorless - No Toxic Vapors• USDA/FSIS/CSA Approved• CFIA Approved
SL75NOPIG600 SL 75 Cartridges - No PigmentSL75RYNO600 SL 75 Cartridges - Ryno GraySL75XNOZZ SL 75 NozzlesSL7510GLNOPIG SL 75 10 Gallon Units - No Pigment
KOLDFLO1 Kold Flo 1-Gallon BottleUPM-BLUE UPM Winter Cold Patch- 50#UPM-Green UPM Spring-Fall Cold Patch-50#UPM-Yellow UPM Summer Cold Patch 50#
Patches
Concrete Mender
• Ultra Low Viscosity in Neat Configuration Will Penetrate Concrete for Permanent Bond
• Cures in 30 Minutes for Quick Open to Traffic
• Will Cure at -30°F. • Cure Time Will Be Extended at Lower
Temperatures• Mixed with Industrial Quartz Sand will Make
a Durable Polymer Concrete
Page 22 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
EQUIPMENT
14” Cutquik® Saw EWCTS420-14
• Easy adjust-ment of water flow while cutting
• Water control remembers last setting used
12” Cutquik® Saw TS410
• 64CC engine
• 3.6” depth capacity
• Able to be mounted on cart with adapter kit
Cutquick® Cart4223007100• Specially
designed for matched cutting per-formace
• High impact resistant wheels with sealed ball bearings
INTRODUCING THE NEW Stihl TS-500i
The TS 500i Cutquik has 17% more power and 15% more cutting speed compared to the TS 420, yet weighs only 6% more.
A low-emission engine provides optimal torque throughout the rpm range and eliminates the need for a choke. The
computer-mapped fuel injection system continuously and precisely de-termines fuel mixture, injected quantity, injection and ignition timing. An electronic water control feature allows for easy and efficient water flow
adjustment while cutting.
Visit Jobsite Supply
to find out more!
42010071041 Depth wheel kit for cart
Safety Harnesses
TS 500i Cutquik®
• Low emission engine• Optimal torque throughout
the rpm range
Backpack BlowerBR550• Powerful and fuel-efficient,
low-emission engine with improved durability
• Three-position adjustable blower tube with increased wear area nozzle
• High quality, durable harness with dual adjustments and STIHL logo
• Simplified starting procedure• Single-handed operation
Blower 25.4 CC EngineBG55Power through outdoor clutter with the BG 55 STIHL HomeS-caper Series™ handheld blower. Featuring a round nozzle for increased air volume, this gas leaf blower quickly clears leaves and grass clippings from driveways and sidewalks.
MS 180 Chain Saw - 16”MS180EZ-14Features the Easy2Start™ system, making this chain saw virtually effortless to start. Perfect for cutting firewood or felling trees up to 12 inches in diameter, it is a lightweight practical chain saw with convenient features you can rely on.
MS250C-16 18” Gas Chainsaw
FCBKM Curb Lawn Edger
HTKMPole Pruner
HLKMStraight Hedge Trim Attachment
KM55RPower Head
Kombi-System with Accessories
BGKMBlower
FS-KMTrimmer
EQUIPMENT
ZP303 H 3” Centrifugal PumpZP303• 5.5 HP Honda
engine• 14,700 GPH, 25
ft. max lift, 105 ft. of head
• 3” suction & discharge
MVC-88• 4.8 HP Honda
Engine• Plate size:
19.7” x 20.7”• Centrifugal
force: 3450 lbs.
MT-75HS• 3,200 Impact, 144.OCC
Robin EC-12D/G, oil bath lubrication
MVC-82• 4.8 HP Honda Engine• plate size: 17.7” x 22”• Centrifugal force: 3080
lbs.
High Cycle VibratorMT-75-H• VA-1A Controller powers one VH-32,
42 or 52 vibrator.
NEW - HHXD5• Patented
swing-away upper frame design
• Helical gearboxes
HTX4445• 8’ Hydrostatic 2-in-1
heavy duty gear boxes with shaft driven cooling fans
Ride-On Power Trowels
HHN34TVDTCSL5• 8’ Mechanical• Twin Pitch Control
HTN28KTCSL • 34.0 HP Turbo
Van-guard diesel engine
• Non-overlapping twin 48’ blades
2’ Edging TrowelC-4-2H• 2.5 HP • Honda G100K2QA• Includes QuickPitch
handle
3’ TrowelJ336 H55• 5.5 HP • Honda GX-160 • 4 blades
Hydrostatic Ride-On Power Trowels
Walk-Behind Power Trowels
Page 23 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Concrete Vibrators
Centrifugal Pumps
Rammers
Plate Compactors
FOR SALEOR RENT!
• Laser-controlled accuracy.• Screeds to higher tolerances
than conventional methods.• Works well with various
slump and mix designs.• Better concrete
consolidation than hand-held vibratory screeds or roller screeds.
• Lightweight & easy • maneuverability.
Mini Screed C
Superior productivity and flatness with the Mini Screed™ C. Its what you have come to expect from Somero®
The CopperHead XD is the right machine for contractors who want better performace when you encounter difficult applications such as:• chaired rebar• lower slumps• poor subgrades
3.0OSCHX030
EQUIPMENT
Metal Cutting Wheels
24051• 14”x3/32”x1” iron worker
abrasive blade
20060• 4-1/3”x1/4”x7/8” metal grinding wheel• 25/Box
Tools
1-1/8”x6”x14” Moil Point1421019
1-1/8”x6”x14” Narrow Chisel1421030
3” Chisel 1-1/8” Shank1421040
5” Asphalt Cutter 1-1/8” Shank 1421045
Ground Rod Driver 1-1/18” Shank 1421806
Bushing Tool 1-1/8” Shank142848
Rivet Buster 4181 Puler
CP 1210CP 1240
CP 1230
CP 4131
Page 24 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
12” JS HD Cured* $9514” JS HD Cured* $99
22021 4-1/2”x.045x7/8 Thin Cut Off Wheel-25/bx23336 6”X.045X7/8 Thin Cut Off Wheel-25/bx23420 12”x1/8”x20mm Metal Blade-10/bx23423 12”x1/8”x20mm Concrete Blade-10/bx23455 14”x1/8”x20mm Metal Blade-10/bx23458 14”x1/8”x20mm Ductile Iron Blade-10/bx23460 12”x1/8x1” MAC Blade-10/bx
Portable or Towable Generators
Call for Sales or Rental
(317) 684-7474
CPM-10-10” Scarifier• Side loading
large drum as-sembly
• 10” wide cut - removes 3/16” per pass
• Vacuum port standard for dust-free cutting
Grind Stripper• Round shroud gets
tight against walls• Easy rolling 10” steel-
core, rubber wheels• Lifting eye for easy
loading & unloading
• Up to 8” working width• Up to 1/8” working depth per
pass• power source over drum to
eliminate vibration & maximize surface contact
CPM-8-8” Scarifier
Floor Prepping Equipment
Grind Stripper• Dual counter
rotating discs prevent maching from pulling side to side
• Includes 2 multi-accessory discs
• Includes water mist system & vacuum port
Quick Change Multi-Accessory Disc
General Purpose Grind - Removes General Purpose Epoxy, Mastics, Thinsets, Water-proofing Coatings and more. Double Diamond Dots, Single Diamond Dots & PCD Accessory available.
JS Diamond Blades - 1” Arbor w/ 20mm Bushing
Soff-Cut Diamond Blades
• Concrete Floor Saw Blades, Hi-Speed Cutoff Saw Blades, Masonry Saw Blades, Tile Saw Blades, Power Tool Blades
EQUIPMENT
6” Decorative Concrete Prowler SawX150D
• 4 1/2 HP Robin engine• A preset depth of cut• 3 different size guide wheels, for
1/8”, 1/4” & 1/2” saw joint
The ProwlerX150
• 4 1/2 HP Robin engine• Depth of Cut 1” to 1-3/16”• Light to medium duty use
Soff-Cut 2000X-2000
• 9 HP Robin engine• Depth of cut: 1.5”• Medium to heavy duty use
Soff-Cut 5000 PaverX-5000
• 27 HP Kohler engine• Depth of Cut: 2” - 4”• Heavy duty, mulit-purpose, highways, runways & paving uses
Power CuttersConcrete Saws
Page 25 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Hummer Screed 2MVPR100H• 4-stroke honda engine• Balanced for Easier Lift• Longer Life
PR 100 ScreedPR100C• Use Inside• No Start Procedure• No Gas/Oil Maintenance
Hummer Vibrator• User Friendly - Less Fatigue• Large Heads for Standard Walls• Deep Foundations
Screeds
LB104 4’ Screed BarLB110 10’ Screed BarLB112 12’ Screed BarLB114 14’ Screed Bar
FLX12-3000 12”x.120 Soffcut BladeFLX14-3000 14”x.120 Soffcut BladeXL10-2000 10”x1/8” Green BladeXL10-3000W 10” Red Blade-14” Skid PlateXL10-5000 10”x1/8” Yellow BladeXL12-2000 12”x1/8” Green BladeXL14-2000 14”x1/8” Green BladeXL14-3XX3 13-1/2”x1/8” White BladeXL14-3000 14”x1/8” Red BladeXL55-3000A 5-1/2”x.095 Red BladeXL5-R250 5/8” Radius Blade-X-50XL5-R500 3/4” Radius Blade X-50XL6-2000 X-150 6” Green Prowler BladeXL6-3000 X-150 6” Red Prowler BladeXL8-2000 8”x1/8” Green Blade
Pro 1.5+ 13 Amp Power Unit70M3• High strength cast
aluminum housing• Rugged shock absorbing
frame
70D1 1”x12” Vibrator Head70F15 1-1/2”x14” Vibrator Head70G17 1-3/4”x14” Vibrator Head70J2 2”x14” Vibrator Head70B7 7ft. Shaft for Vibrator70B10 10ft. Shaft for Vibrator70A21 21ft. Shaft for Vibrator
Concrete Vibrators - Heads & Shafts
K760 14” Power Cutter966433401• 5HP air cooled 2 cycle
motor• 14” blade capacity• 5” cutting depthBlade: in (mm) 12/14 (305 / 350) Cutting depth: in (mm) 4/5 (100 / 127) Power: hp (kW) 5 (3.7) Displacement: cu in (cc) 4.5 (74) Weight: without fuel and cutting equipment, lbs (kg) 20.7/21.6 (9.4 / 9.8)
• Construced from heavy-gauge, cold-rolled steel
• Spiral-wound wire guard meets OSHA requirements
• Rubber wheels and handle for portability
PB36D 36” Fan Direct Drive 2 SPDPB42D 42” Fan Direct Drive 1 SPD
Ventilation Fans
CDB36-D
K3000 14” Electric Power Cutter (Wet Cut)968378401• Suitable for general concrete cutting, masonry or
landscape work• 14” blade capacity
Cut-N-Break Concrete Saw968339102• 5HP, 74cc motor• Depth of cut per pas 2/5”• 9” twin blades
K3000 14” Electric Power Cutter 96837604(Dry Cut)• Vacuum Attachment (Removable) for clean, dry
cutting
For Sale or Rent!
Page 26 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
EQUIPMENT
EU1000IAN
EB Series - Industrial Generators• Commercial grade Honda Engines• 120/240V selection switch for total generator output in 120V• Full frame protection; Full GFCI protection on all outlets• Intelligent Auto Voltage Regulation (iAVR); OSHA compliant• Wheel, handle 7 hanger kit standard
For Sale or Rent! wwwjobsitesupply.com
Model Engine Wattage Max AC Output
Rated AC Output
iAVR Output
Noise Level
Fuel Ca-pacity
Run Time @ 50% Load
Dry Weight
EB4000 iGx270 OHV with Oil Alert™
4,000 120/240V 4,000W 33.3/16.7A
3,500 29.2/14.6A
5,000W for 10 sec.
71dB 6.2 gal. 16 hours 185 lbs.
EB5000 iGx390 OHV with Oil Alert™
5,000 120/240V 5,000W 41.7/20.8A
4,500W 37.5/18.8A
7,000W for 10 sec.
72dB 6.2 gal. 11.2 hours 214 lbs.
EU Series Super Quiet Generators• Inverter technology makes these generators extremely lightweight,
portable & fuel efficient• Create “clean” or stable power - ideal for sensitive electronic
equipment• Totally enclosed body, making them incredibly quiet• 8-20 hours of run time per tank, depending on model
Model Engine Wattage Max AC Output
Rated AC Output
Max DC Output
Noise Level @ Rated Load
Fuel Ca-pacity
Run Time @ 25% Load
Dry Weight
EU1000IAN GXH50 Honda OHV
1,000 120V 1,000W 8.3A
900W 7.5A 12V 96W 8.0A
59dB 0.6 gal. 8.3 hours 29lbs.
EU2000IAN1 GX100 Honda OHC
2,000 120V 2,000W 16.7A
1,600W 13.3 A
N/A 59dB 1.1 gal. 9.6 hours 46.3lbs.
EU3000IHAN GX160 Hond OHV
3,000 120V 3,000W 25A
2,600 W 21.7A
12V 100W 8.3A
65dB 1.56 gal. 7.7 hours 78lbs.
EU3000ISAN GX200 Honda OHV
3,000 120V 3,000W 25.0A
2,800W 23.3 A
12V 144W 12A
58dB 3.4 gal. 20 hours 134lbs.
EU6500ISAN GX390 Honda OHV
6,500 120/240V 6,500W 54.1/27.1A
5,500W 45.8/22.9A
N/A 60dB 4.5gal. 14 hours 253lbs.
EU2000IAN1
EB4000
EB5000
EU3000ISANEU3000IHAN Handi
EU6500ISAN
HF15 • Covers 1500 sq. ft./hr
at 1/8” thickness• Variable speed 0-2
gpm• No seals or packings• No power surge
start-up• Remote start/stop• Auto Reversing Technology• Tool tray
Spray Buddy
Power Buggies
Vibrators
Screeds
Allen Engine Driven ScreedWith engine options ranging from 5.5HP to 11HP, there’s a steel screed for every floor finishing operation.
Allen 12 HED Steel ScreedWith rotating engine shaft vibrator & manual winches.
Allen Flex Shaft VibratorAvailable in electric or gasoline powered backpack models.
AR16• 16 cu. ft. bucket• Variable speed hydrostatic pump• (2) Individual hydraulic wheel motors with a 18.7 qt.
hydraulic reservoir
AR21• 21 cu. ft. bucket• Variable speed hydrostatic pump• (2) individual hydraulic wheel motors with a 18.7 qt.
hydraulic reservoir
Hy-Flex Slinger• DC motor for
variable speeds• 30 degree upward
application to apply mortar to the under-neath surfaces
• 360 degree application
• Heavy duty electric winch with a 700 lb capacity
• Depths up to 35 ft.
Heavy Duty Orange#00007 - 4” DiameterHOL: serves with M1 Core RtgGives excellent footage & drilling speed. Designed for all types of wet drilling in applications with light to moderate steel. Wet cut core bit.Stocking 2-1/2” to 6” up to 14” available.
Heavy Duty OrangeDry Hole Saw - 2”#00011DH: Block & Soft Brick(not for use on concrete)Very high quality diamond & longer coring life
07385 7” x 5/8 - 11 Cont Rim Diamond Cup Wheel07442 7” x 5/8 - 11 Single Row Diamond Cup Wheel07429 4” x 5/8” - 11 Standard Double Row Cup Grinder07434 7” x 5/8” - 11 Standard Double Row Cup Grinder07450 7” x 5/8” - 11 Standard Single Row Cup Grinder27542 4” “V” Crack Blade 5/8” - 11 Arbor
Hoses & Accessories
DP300-50MF 3” Blue/PVC Discharge Hose & EndsDPG200-50MF 2”x50’ Discharge Hose/Screw
Designed for open end water discharge service.Construction: Homogeneous PVC tube & cover, reinforced with 3-ply polyester yarn.Temp range: 5-130 FBulk Coils: 300 ft.Available in sizes up to 16” I.D.
PVC Discharge Hose
White Cloth Discharge HoseGeneral pupose lay-flat water discharge hose. Construction: Black SBR rubber tube with white wo-ven cover 100% polyester cover.Bulk Lengths: 50 & 100 ft. through 3”
DM200-50MF 2x50 White Cloth Discharge Hose
Standard duty PVC suction has has a smooth bore allowing full flow.Construction: All PVC w/ an encapsulated rigid PVC helix for crush reistance & flexibilty.Temp Range: 0-150 F
PVC Suction Hose
SP300MF 3’ Green PVC Suction HoseSP200 2x20” Green Suction Hose
Accessories
QCA200 Male 2” ZC End w/ Female ThreadMF200-F 2” Female Thread Suctin CoupQCF200 Male 2” QC End w/ Male ThreadQCE200 Male 2” QC End w/ ShankQCA300 Male 3” QC End w/ Female ThreadQCE300 Male 3” QC End w/ ShankQCB200 Female 2” QC End w/ Male ThreadQCD200 Female 2” QC End w/ Female ThreadQCF300 Male 3” QC End w/ Male ThreadQCC200 Female 2” QC End w/ ShankMF300-F 3” Female Thread Suction CouplQCC300 Female 3” QC End w/ ShankQCB300 Female 3” QC End w/ Male ThreadQCD300 Female 3” QC End w/ Female Thread
EQUIPMENT
Page 27 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
2” Trash Pump
CWHO75-50MF 3/4 x 50 Rubber Water HoseCWHO75-100MF 3/4 x 100 Rubber Water Hose
M1 Complete Anchor Rigwith 20amp Core Bore Motor#4245055• 6” wheels for easy mobility• Dual switch/outlet control panel with amp meter• Vacuum pump for quick mounting to flat surface
without drilling an anchor hole• Anchor slot base
KTH50X• 2”NPT Inlet &
Outlet• 5.5HP GX 160
Honda Engine• 185 GPM - 26’
Maximum Lift
Semi-Trash Pump
STH50X• 2”NPT Inlet &
Outlet• 4.0HP GX 120
Honda Engine• 150 GPM - 26’
Maximum Lift
Trash Water Pumps
WT20X2 inch, 163cc 187 gal per minute Trash Water Pump
WB20X 2 inch, 118cc 152 gal per minute Centrifugal, Self-priming Water Pump
#00031 3” Dry Hole Saw#00014 3-1/2” Dry Hole Saw
*Call for availibility
Page 2 8 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
EQUIPMENT
Oil-injected Vibratory RammersBS 70 2I
Shoe Size:• 11” x 13” or 13” x 13”Operating Weight:• 164 lbPercussion Weight:• up to 700 blows/min
Electric External VibratorAR36/6/042
• Standard centrifugal force 391.2 lb.• Variable vibrations up to 6000 rpm• Operator-friendly clamping system
Walk Behind TrowelCT48-8A
Trowel Diameter• 48”Speed Range:• 60-125 rpmHorse Power• 8mph
Vibratory Plate6555 H
Operating Weight:• 1049.4 lbsBase Plate (W & L):• 21.7” x 35.4”Centrifugal Force:• 14,612.6 lb
Internal Vibrator with InverterIRFU 57
Head Diameter • 2.3 inHose Length • 16.4 ftCompaction Diameter • 33.5 in
Ride on TrowelCRT48-35V
Speed range: 25-165 rpmMax rated power: 35 hp @ 3800 rpm
Plate Compactor with Wacker EngineWP 1550Lightweight, high strength aluminum components including the engine console and beltguard have been combined for reduced weight and easy machine handling.
Straight, center-mount-ed guide handle offers superior maneuverabil-ity and can be lowered within inches of the surface to operate plate under obstacles and form work.
Centrifugal Trash PumpPT 2A
Submersible Pump 220V/60HzPS2-500
Discharge Diameter • 2 inOperating Weight • 21 lbMax Head • 39.5 ftMax Discharge • 62.4 gal/minPower • 2/3 hp
Suction & Discharge Diameter • 2 inOperating Weight • 96 lbMax Discharge • 210 gpm
Mobile Generators
Light Towers
For Sale orRental!
EQUIPMENT
Cold Water Pressure Washer
WP-3004-4MHB300PSI Cold Water Pressure WasherExternal bypass system allows more water into the system to protect from heat build-up.
Page 29 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Pervious Concrete Tools
Pervious Concrete • Placing • Jointing • Curing
BUNYANTHE WORLDS MOST EFFICIENT SCREED SYSTEM
Mortar Mixers
WM70P7 Cubic Ft Poly Drum
• Capacity: 1-1/2 to 2-1/2 bags
• 8HP Honda engine• Manual dump action
WM120SHH12 Cu. Ft. Steel Drum with Coupler
• Capacity: 3-1/2 to 4 bags• 11HP Honda engine• Cast iron paddle arms
For Sale orRental!
Test Plugs & Testing Equipment
First Aid
Fire Extinguishers
10lb Proline™ ABC Fire Extinguisher466204K• 10lb ABC Extinguisher
with Wall Hook• UL Rating - 4A:60B:C• 70/Skid
Traffic Cones
DW Series Wide Body Traffic Safety Cone 18” Orange w/Black C - 10lb Base3004023
SAFETY IDEAS AT WORK
3007773• 24” Stop/Slow Paddle• EG Reflective Plastic w/
21” Plastic Handle • 61” Handle Adapter
3013308• +2.5 Diopter Clear Lens
with Black Frame
Signs @ JOBSITE SUPPLY
Lighting
3/8”x6’ Adjustable Locking Cable
8413XDPF• Patented locking mechanism
holds the cable tight at any position
• Convenient, rekeyable cylinder• #5KA Master Lock keyed alike • Fits most portable boxes
including Greenlee, Knaack & Delta. All key codes available.
Page 30 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
46622701K 2 1/2lb Fire Extinguisher-UL Rating 1A:10B:C-144/Skid
46611201K 5lb Fire Extinguisher-UL Rating 3A:40B:C-112/Skid
466206K 20lb Fire Extinguisher-UL Rating 10A:80B:C-50/Skid
Hydration Solutions
WL175MH 175 Watts, 120 Voltage, 15, 000 Lumens - Portable Light
WL400MH 400 Watts, 120 Voltage, 40, 000 Lumens
WL85S JR 85 Watt Flourescent Wobble Light JR
3004023 18” Traffic Cone Black Base3004057 28” Traffic Cone - 7lb. Black Base3004176 28” Traffic Cone - 10lb. Black Base
Hydration Solutions & Accessories
Jobsite Supply 5 or 10 Gallon Industrial Blue Cooler
28” Lime Traffic Cone2212152
1610IS JS 10 Gal Cooler1685IS JS 5 Gal Cooler8257UN Cup Holders/4-6.5oz Cups2B4112 Paper Cups - 6.5oz164002 Mounting Brackets
FK200906 10PW Blood Pathogen Safety KitK202012 10PW GP JSI First Aid KitK202015 16PW GP JSI First Aid KitK206212 50 Man First Aid Cabinet-FAC-3K250-506 Eyewash Station 32oz BottleK401025 25 per LPEK JSI First Aid KitK401050 10PW LPEK JSI First Aid KitK401060 50 per LPek JSI First Aid Kit229-060 Eyewash Bottle 40oz250-525 Eyewash 16oz Bottle Sterile
Stocking a complete line of competetively priced First Aid Kits
that meet or exceed the ANSI Z-308.1 standard.
20 Ounce Bottles• Orignal Lemon Lime 32868• Riptide Rush 32488• Glacier Freeze Frost 32486• Orange 32867
2-1/2 GallonPowder Mixes
• Fruit Punch 33691• Orange 03970• Original Lemon Lime 03969• Glacier Freeze Frost 33677• Riptide Rush Frost 33673
Flavors
Flavors
Stop & Slow Paddles
Nemesis Glasses
3000355 Black Frame - Clear Lens3000356 Black Frame - Smoke Lens3020706 Camo Frame - Clear Lens3010707 Came Frame - Smoke Lens
10” x 14” Plastic
CONSTRUCTIONAREA
HARD HATAREA
CONSTRUCTIONAREA KEEP OUT
MEN WORKING DO NOT ENTER
DO NOT ENTER THIS AREA
OTHERS AVAILABLE!
No Set-Up - Just Plug It In• Metal Halide• Bright, Durable & Virtually Indestructible• 36” Tall• Self-Righting• Internal Ventilation System• Shock Protected Bulb
SAFETY IDEAS AT WORK
DW Series Wide Body Traffic Safety Cone 18” Orange w/Black c 3004023
Zinc plated stamped steelMeets or exceeds OSHA 1926AF77710
Double-leg with snap hook and flat steel rebar hooks at leg ends x 6 ft. (1.8m)1340161
3,600 lb Gated Hooks Meeting ANSI Z3591341001
5000 lb Anchorage PointAJ450A
5000 lb Fall Arrest2190053
DBI Sala 3590500 Rebel™ 33’ (10m) Self Retracting Lifeline3590500
DBI/Sala Glyder2™ Sliding Beam Anchorage System2104700
ZorbitT Energy Absorber for Horizontal Lifeline Systems7401013
Anchorage - Anchorage means a secure point of attachment (structure) for the fall arrest system.
Body Support - Full body harnesses a connection pointon the worker for the personal fall arrest system.
Connections - Connectors are devices used to connect the worker’s full body harness to the anchorage system. (eg. shock absorbing lanyard, self retracting lifeline, etc.)
Descent/Rescue - Rescue & retrieval of a fallen worker is a required compo-nent of any Fall Protection Program.
Page 31 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Pro™ Line Positioning Harness
6’ Lanyard w/ Shock Absorber Hook
6’ Rope Shock Absorbing Lanyard
3’ Webstrap Anchor Sling
Self Retracting Life Lines
Reusable Concrete Anchors
The Basics of Every Personal Fall Arrest System Can be Described as the ABC’s
of Fall Arrest. Fall Protection
Beamers
Temporary Horizontal System
Rebar Chain Assembly 2” Hook
Beam Anchors
DBI/Sala Glyder 2™Sliding Beam Anchorage System2104700
Visit www.jobsitesupply.com for fall protection training schedules.
NEW Nano-Lok™ System
MAINTAIN SAFE FALL DISTANCES FOR IMPROVED WORKER SAFETY Nano-Lok is ergonomically designed for ease- of-use and is ideal for direct connection to most harnesses. At only 1.6 lbs., it’s virtually unnoticeable on your back, stays out of the way and can be easily used as a lanyard replacement.
SAFETY IDEAS AT WORK
Page 32 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
• Cap Style - 6-Point Nylon Suspension With Ratchet Adjustment
• Meets ANSI Z 89.1 - Type I, Class C, E & G
• Accessory Slots• Accommodates a Wide
Variety Of Eye, Face & Hearing Products
19951 White Omega II MEGA RATCHET® Safety Helmet19952 Yellow Omega II MEGA RATCHET® Safety Helmet19953 Orange Omega II MEGA RATCHET® Safety Helmet19954 Red Omega II MEGA RATCHET® Safety Helmet19956 Blue Omega II MEGA RATCHET® Safety Helmet19957 Gray Omega II MEGA RATCHET® Safety Helmet19958 Green Omega II MEGA RATCHET® Safety Helmet19989 Hi-Viz Pink Americana® MEGA RATCHET® Safety Helmet19945 I85R Replacement Suspension19146 304 Replacement Brow Pad
• 100% polyester mesh. Zip-per front closure.
• 2 exterior waist pockets w/hook & loop closure.
• 2 interior waist pockets. • Conforms to ANSI/ISEA
107 standard. • Medium - 5XL
62136 Medium-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62137 Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62138 X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62139 2X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62140 3X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62141 4X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz 62142 5X-Large-Lime ANSI Class 3 Vest - Mesh Hi-Viz
• Zipper front closure. • 2 exterior waist pockets and 1 left chest pocket. • AwareLite reflective trim.• Conforms to ANSI/ISEA 107 standard for design,
color and reflectivity. • Medium - 5XL
61647 Medium-Hi-Viz Lime ANSI Class 2 Economy Vest61648 Large-Hi-Viz Lime ANSI Class 2 Economy Vest61649 X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61650 2X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61651 3X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61652 4X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest61653 5X-Large-Hi-Viz Lime ANSI Class 2 Economy Vest
• Woven Cotten. • 12 pockets - 2 interior waist, interior waist pen, 4
divisional right chest, double left chest - 1 open and 4 pen.
• Zipper Closure• Conforms to ANSI/ISEA 107. • Medium - 5XL.
61200 Medium-Lime ANSI Class 2 Surveyor’s Vest 61201 Large-Lime ANSI Class 2 Surveyor’s Vest61202 X-Large-Lime ANSI Class 2 Surveyor’s Vest61203 2X-Large-Lime ANSI Class 2 Surveyor’s Vest61204 3X-Large-Lime ANSI Class 2 Surveyor’s Vest61205 4X-Large-Lime ANSI Class 2 Surveyor’s Vest61206 5X-Large-Lime ANSI Class 2 Surveyor’s Vest
New Hire Kits
16913: Neatly Shrink Wrapped Inside the Helmet - New Hire Kit Includes: • 19321 - White ERB Liberty® Ratchet• 17940 - Clear IProtect® Eyewear (Clear)• 14406 - Work Gloves (Large)• 14388 - Reusable, Corded Ear Plugs
18566 Includes 19321, 17940 (Smoke) 14406, 14388
*Certified when headband is installed in reverse position.
Omega II Mega Ratchet® Safety Helmets
ANSI Class 3 Vest - mesh Hi-Viz Lime
ANSI Class 2 Surveyor’s Vest - Solid Woven - Hi-Viz Lime
ANSI Class 2 Vest - Mesh - Economy - Hi-Viz Lime
• ANSI Class 2 Break-Away. Polyester woven tricot• Fall Protection D-Ring slot on back. • Hook & loop front closure. 6 pockets - 2 exterior
waist, 1 exterior chest, and 2 pen. Mic tabs. • AwareLite reflective trim.• Medium - 5XL
61390 Medium-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61391 Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61392 X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61393 2X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61394 3X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61395 4X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring61396 5X-Large-Hi-Viz Lime Class 2 Vest Tricot Break-Away with D-Ring
ANSI Class 2 Vest Tricot Break-Away w/ D-Ring Slot
SEE MORE ERB SAFETY PRODUCTS ON NEXT PAGE...
Eye Protection
17940 (Clear)Lightweight 9.5 base curve with hard coated polycarbonate lens offers 99 percent UV protection. Meets ANSI Z87.1 high impact.
17941 (Smoke)9.5 base curve offers great wrap around protection. Hard coated polycarbonate lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.
SAFETY IDEAS AT WORK
Page 33 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Custom Printed Safety Protection
Logos are great for:• Corporate Identity• Work Crew
Segmentation• Ground Breaking
Ceremony• Visitor
Identification
• Choose your product & submit your logo & camera ready artwork to Jobsite Supply for your custom safety gear!
17969 Inhibitor (Clear)Frameless wraparound design fit provides optical protection. 4-position adjustable temple with non-slip rubber tips. Lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.
17970 Inhibitor (Smoke)Frameless wraparound design fit provides optical protection. 4-position adjustable temple with non-slip rubber tips. Lens offers 99% UV protection. Meets the requirements of ANSI Z87.1.
373 JacketANSI Class 3 Rain Jacket. Polyes-ter woven oxford with PU coating. 5.5mm. Snap front and wrist clo-sure. Attached hood. Oversized. No pockets. Conforms to ANSI/ISEA 107 for design, color & reflectivity. M/L - 5X/6X
373 PantsNSI Class E (ensemble) when not worn with other ANSI 107 garment. Polyester woven oxford w/PU coat-ing. 5.5mm. Pocket slits on side. Snap ankle and fly closure. Class 3 when worn with Class 2 or 3 vest. AwareLite reflective trim. MD - 5XL
S376 SweatshirtANSI Class 3 Sweatshirt. 7oz poly-ester. Attached hood with draw-string. Large pass through front pockets. 3M Scotchlite reflective trim. Conforms to ANSI/ISEA 107 for design, color and reflectivity. MD - 5XL
Low 12 Piece Minimum!
SAFETY IDEAS AT WORK
Page 34 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
• No right/no left - for no-hassle design
• Easy on/easy off - Provided by 800% elongation, and smooth, drag-free inner surface
• Lasts 4x lon-ger - Made out of Natural Latex Rubber, provid-ing enhanced material strength
17851 17” Slush boot, medium 8-1017852 17” Slush boot, large 11-12#17855 17” Slush boot, large-x-large 13-14#17853 17” Slush boot x-large 15-16
Rebar Safety Caps
#3-#8 impalement prevention with steel plate
Flashing LED Paddles deliver a bright warning for protection.• Will operate for over
20 hours continuously on 2 AA rechargeable NiMH batteries
• 18” or 24” sizes are available with any message & grade of reflective sheeting
• Optional carrying bag holds 2 paddles & all accessories including 2 5-foot staffs
• Switch can activate side A, side B or both sides
BlinkerPaddle® Safety Cans
• Galvanized steel Type-1
• Meets OSHA requirement
UI10FS 1 gallon red safety can with funnelUI20FS 2 gallon red safety can with funnelUI50FS 5 gallon red safety can with funnelUI20FSB 2 gallon blue safety can/kerosene w/ funnelUI50FSB 5 gallon blue safety can/kerosene w/ funnelUI50FSY 5 gallon yellow safety can type 1 diesel w/
funnel
LED Road Flares
6 Pack Road Flare Kit1186 An emergency flare that does
not produce a flame, smoke or harmful bi-products and does not require batteries. Recharges so that it is ready for use when needed.• 16 bright LEDs; choice of
red, blue or yellow LEDs• 9 flashing patterns includ-
ing SOS• Powerful magnet to attach
to metal surfaces• Waterproof & submersible
to 33 feet
Metacaulk®
Protective Gloves
G-Tek 3GX ANSI Level 319-D310 L-XL• Poly Coated
Nitrile Glove Gray Dip34-225 M-L-XL
Great White Cut ANSI Level 219D-622 L-XL
G-Tek 3GK ANSI Level 419-D330 L-XL-XXL• Dyneema Fiber Poly Coated
G-Tek Maxiflex Ultimate34-875• Nitrile
G-Tek Maxiflex Endurance34-845• Foam Nitrile Dotted Palm
34-800 G-Tek Maxifoam - M-L-XL95-809 Brown Jersey Glove
66302 Metacaulk - 10oz 1000 Water Based66303 Metacaulk - 30oz 1000 Water Based66382 MC150-10oz GP Intumescent
Fire Stopping Products
Slush Boots
DISC10
Small #3-#9 HI Viz Orange Mushroom Style Safety Cap
CAPMUSH25
SAFETY IDEAS AT WORK
Protective Eyewear
Sealant Products3M™ Polyurethane Sealant 540
• Bonds to a variety of materials
• Paintable• Smoke & flame
rated, 90 minute skin time
525 Polyurethane Construction Sealant (NPI)560 Polyurethane Adhesive Sealant strong 1
component, moisture curing product230 Crystal Clear Sealant (Clear)860 Tartan™ Strapping Tape 860 - black
tensilized polypropylene backing with a synthetic rubber resin adhesive.
3M™ Particulate Respirator 8511, N95Added value with bulk orders!
• 3M™ CoolFlow™ Valve
• Adjustable M nose clip• Braided head bands
and soft inner materials
• Spacious and durable• Designed to in-
crease comfort and wearability
Respirators
3M™ Particulate Respirator 8210, N95
Occupational Health & Environmental Safety Protective Clothing
Protective Coverall - 4510
• Elastic waist, ankles, and wrists for convenience and freedom of move-ment.• Two-way zipper with storm flap for convenience and to help provide ad-ditional protection.
• Anti-static coating on both sides helps reduce static build-up and prevent the risk of static discharge during use.
4520 Disposable Paint Suit4530 Blue Coverall4540 Flame Resistant Coverall Paint Suit4565 Disposable Chemical Protective Coverall
3M™ Tartan™ Masking Tape 200Utility purpose paper tape.Natural. Available in 1” x 60yd. & 2” x 60yd.
Cubitron™ II Abrasive Belts have raised the bar for grinding performance & productivity - thanks to 3M precision-shaped ceramic graintechnology.
• Average up to 30” faster cutting on hard to grind metals than the next best competitive belt
• Cuts cooler - diverts heat from the workpiece & belt to the swarf
• Helps eliminate burnishing & heat stress• Available in 3 grades: 36+, 60+ & 80+• 1/2” to 6” available
Cubitron™ II Abrasive Belts
Firestops
CP25WB
15WB 2 Hour Fire Protection Sealant3000 Fire Barrier Water Tight Sealant615 PLUS Fire Barrier Duct WrapFire Dam150
Acrylic Latex Caulk - 10oz & 24oz - Available in Blue, Red & Limestone
• 4-hour protection sealant• High performance fire protection• Through penetration
Page 35 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
3M™ Scotch Weld Products
62-4983-8030-2
62-9880-9930-5 Cylinder Adhesive Applicator STD Output *Includes 9501 Spray Tip
62-9880-8148-5 Cylinder Adhesive QSS Spray Tip62-9880-0006-3 Cylinder Adhesive 6’ Hose
Holdfast 70 Cylinder Spray Adhesive Coverage: 2,590SF @ 1 GM/SF
3M™ Fall Protection Roofing Kit20058 Portable, Convenient & Economi-
cal - this versatile fall protection kit is designed to meet most any roofing
application. Includes: • SafeLight universal size harness• 6’ shock absorbing lanyard• 50’ rope lifeline with attached manual rope grab• Reusable roof anchor in 5 gallon bucket with reusable lid• Product complies with OSHA & ANSI standards
Goggles
TEKK Protection Impact Goggles91251
91252-0000 Chemical Splash and Impact Resistant Goggle
8211 3M 8211 N95 Particulate Respirator w/ Cool Flow Exhalation Valve
07192 Dual Cartridge Respirator Assembly Medium07193 Dual Cartridge Respirator Assembly Large
3M™ Continued on Next Page...
1160-A 3M™ Duct Tape - 1.88” x 60 yards8087 3M™ Construction Seaming Tape2090 Scotch-Blue™ Painter’s Tape - Multi-Surface2060 Scotch® Masking Tape for Hard to Stick
Virtua™ V411672-0000 (Clear)• Anit-fog lenses• Extended viewing
range in every direction without distracting sideshields or brow guard
• Soft, universal fit nose bridge
11673-0000 Gray Virtua™ V4 anti-fog eyewear11674-0000 Mirrored Virtua™ V4 anti-fog eyewear
BX™ Readers with 1.5 Diopter11377-0000 (Gray Lens - Silver Frame)• Molded in magnifying
diopters• Sleek, contoured &
fully adjustable• Soft nose bridge
11378-0000 BX™ Readers w/ 2.0 Diopter11379-0000 BX™ Readers w/ 2.5 Diopter
Virtua™ Sport11384-0000 • Athletic look styling• Excellent eye cover-
age• Durable, lightweight
frame design
NEW 3M™ Particulate Respirator 8210V
• Proprietary 3M™ CoolFlow™ Valve helps keeps wearer cool
• Cushioning nose foam• Adjustable noseclip
helps provide a custom fit and secure seal
• Classic disposable N95 particulate respirator
• Welded strap at-tachment
• Cushioning nose foam
• Adjustable noseclip helps provide a custom fit
76733 - 6” x 48” 80 Grit Belt
SAFETY IDEAS AT WORK
Ear Plugs
EAR Push-In™ EAR Plug (uncorded)318-1000
318-1001 EAR Push-In™ Ear Plug (corded)312-1224 TFIT 2 Corded Ear PlugP1000 Nitro Ear PlugP2000 Notch Ear Plug
Head Gear
TuffMaster Cap Mounting Headgear 82519-0000Spring #24
TuffMaster Deluxe Headgear82501-0000Ratchet Style
TuffMaster Cap Mounting Headgear82502-0000H18 Tab/Slot
H8A Headgear / WP96 Faceshield Combo82783-0000Includes 82701 shield & 82501 headgear
Face Shields
Steel Mesh Screen82506-0000
82701 3M Easy-Change WP96 9’’ X 14 1/2’’ X .080’’ Clear
82702 3M Easy-Change WP96C 9’’ X 14 1/2’’ X .080’’ Dark Green
SafeClaw Concrete Anchors
• Rated to 5000 lbs.• Requires 3/4” Hole, 3” deep• Easy to remove and reuse
4077 SafeClaw Rated to 10,000 lbs.
Safety Harnesses
Elavation™ Harness, Fall Protection7550
Ameba™ Harness, Fall Protection1413
Apache™ 3 D-Ring Harness with 4” Back Pad, Fall Protection1711
SafeLight Series Safety Harness w/ Side & Back D-Rings & Grommets10951
10950 Safelight Safety Harness
SafeCom Polydac Blended Rope, 50’ 5/8″ w/ 2 Hooks0221-50
0221-100 SafeCom Polydac Blended Rope, 100’ - 5/8″ w/ 2 Hooks
0221-25 SafeCom Polydac Blended Rope, 25’ - 5/8″ w/ 2 Hooks
Hard Hat with Uvicator™ Sensor (Yellow)H-702R-UV
• Uvicator UV Sensor• Comfortable ratchet suspension with height
adjustment• Optional 6-point strap• ANSI/SEA compliant when worn in the forward
& reverse donning positions
H-701R-UV White - Hard Hat w/ Uvicator™ Sensor
Page 36 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
The Reload™ Retractable Lifeline Series
Smarter.• A frictionless braking system with no
moving parts that won’t go out of adjustment
• Individual components removed & re-placed in minutes due to modular design
Safer.• Constantly moving 100% reliable locking
Full Contact™ Pawl mechanism that cannot freeze, hang up or corrode
• No wet lubrication to attract dirt &/or debris
Stronger.• Case is manufactured from unique
toughened nylon to resist impact damage & protect internal chassis
• Modular chassis design & case are not integrated allowing the case to serve strictly as the protective armor
REW-7 3/4” Web 7ft 4lbs Double Lock Snap Hook
REW-12 1” Web 12ft 7lbs Double Lock Snap Hook
REW-23 1” Web 23ft 11lbs Double Lock Snap Hook
REC-23 3/16” Steel Cable (7x19)
23ft 12lbs Swivel Double Lock Snap Hook
REC-30 3/16” Steel Cable (7x19)
30ft 13lbs Swivel Double Lock Snap Hook
REC-40 3/16” Steel Cable (7x19)
40ft 15lbs Swivel Double Lock Snap Hook
REC-50 3/16” Steel Cable (7x19)
50ft 17lbs Swivel Double Lock Snap Hook
Retractable Lifelines
Uvicator™ Sensor Shows Hard Hat Status
• Red = New
• Fading to White = Worn
• White = Replace
4075 SC
Lifelines
Page 37 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SAFETY IDEAS AT WORK
Lighting & Accessories
• Polycarbonate Lens• IP44 design for dust and water resistance• Rubberized carrying handle and base• Highly polished reflector• Low energy consumption• 10-ft integrated power cord• CSA certified
The Defender LED Floor LightsPortable, lightweight, and durable, the Defender Floor Lights deliver big brightness from a small package. Heavy-duty impact resistant housing keeps them on the job. Compact size goes into tight places and stores easily. Fluorescent and LED units available.
E 709187
E 709165
Hang-a-Light®
The Hang-A-Light® temporary area work light is portable, bright and durable. It can be ceiling mounted and utilizes pulse start technology which meets new guidelines for metal halide energy efficiency. This re-usable task light emits more light and uses less energy than the traditional string lights. Now you can “go green” with durability and performance.• Modifiable for 120/208/240/277 V• Heavy- gauge steel construction• Spring-loaded steel safety hook for fast installation• 20,000-hour lamp life• NEC/OSHA compliant• UL certified - suitable for damp locations, CUL Listed, EISA Compliant
111400PS
The SmithLightThe SmithLight battery operated LED Work Light is a rugged, bright and versatile lighting solution. The rechargeable battery makes this light portable and easy to use in any situation. Ideal for night time utility work and road work, industrial and plant use, general construction or anywhere you need portable lighting.
TM120
• IP65 Rating – Water Proof• Double sided light head tilts down by up to 60°• 2 adjustable heights• Light produces no heat output• Safety flash mode feature• Up to 30 hours of battery life on single side mode• 1030 lumens per side
The Hang-A-Light™The Hang-A-Light 84 watt Fluorescent Magnetic Light is an all-around utility light that is energy efficient and waterproof. Extremely durable and light weight, this light can be moved easily and is cool to the touch. The heavy-duty, earth mag-net on the back makes this light ideal for mounting in industrial workshops, tanks or to anything metal. The attached eye hooks make hanging this light simple.
111084
E712810
Pole Attachment
Scaffold Attachment
Tripod
No Set-Up - Just Plug It In.
Wobblelight – the only patented self-righting work light, provides the most cost-effective and high performing jobsite lighting solution for the construction and industrial markets.
• Metal Halide• Bright, Durable & Virtually
Indestructible• 36” Tall• Self-Righting • Internal Ventilation System• Shock Protected Bulb
WL175MH 175 Watts, 120 Voltage, 15, 000 Lumens - Portable LightWL400MH 400 Watts, 120 Voltage, 40, 000 LumensWL85S JR 85 Watt Fluorescent Wobble Light JR
*Replacement Bulbs In-Stock*
MEASURING & LAYOUT
48” Box Frame Level37448• Removable endcaps for
scribing in corners• Rubber endcaps grip walls
& do not leave marks• Crystal clear vials
readable in any direction
35’ Powerlock® Tape Rule with Blade Armor® Coating33-835
35’ x 1-1/4” Fatmax™ Tape Rule33-735
33-725 Stanley Fatmax™ 1-1/4-inch by 25-foot Tape Rule33-730 Stanley Fatmax™ 1-14-inch by 25-foot Tape Rule34-106 Stanley 3/8” to 100-foot Steel Tape
Page 38 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Tape Measures
24” TECH Level37924• 24-inch TECH level that combines
a Stabila spirit level and a dual display electronic level
• Vial accuracy guaranteed for life; digital displays are located on the top edge and the front face for easier and faster reads
• Permanently calibrated, epoxy locked vials
78” TECH Level37978• Offers both a Stabila spirit level
with patented vial system that are guaranteed accurate for life, and a dual display electronic level
• The two digital displays are located on the top edge and the front face for easier and faster reads
• The frame is 30% stronger than previous electronic levels and all four corners have been retained on the new frame
Laser Kit with TripodLAPR-150• Set includes: LAPR 150 rotating laser, receiver
with clamp, 42” - 72” heavy-duty tripod, Hi/Lo elevation rod, target plate, hard shell carrying case, 2 “D” batteries.
Jobsite Supply is a Certified Full Line
Distributor of Stabila Products*No Minimum Order - No Freight Charges
S03601 Clear Line SaverAT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted
Inverted Spray Paint
Jobsite Supply Tape Measure JS25FT • Cushioned case• 7/8” wide, yellow coated blade• Reinforced tip• 7ft. standout
Tape Measures
35’ x 1-1/4” Fatmax™ Xtreme Tape Rule with BladeArmor Coating33-900
MEASURING & LAYOUTFlagging
Surveyors Stake Flags
60-ALQC20• 1/2 x 20 ext leg
aluminum tripod with quick clamp
• 5/8-11 THD
Accessories
37445N 8 ounce brass plumb bob37447N 16 ounce brass plumb bob37448N 24 ounce brass plumb bob37449N 32 ounce brass plumb bob14-661 12’ gammon reel with power return
Page 39 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
15901-25-21 Blue 21” w/ 2-1/2”x3” flag - 10 BDL15901-79-21 Red 21” w/ 2-1/2”x3” flag - 10 BDL15901-38-20 Green 21” w/ 2-1/2”x3” flag - 10 BDL15901-10-21 White 21” w/ 2-1/2”x3” flag - 10 BDL15901-41-21 Yellow 21” w/ 2-1/2”x3” flag - 10 BDL
15901-45-21 Orange 21” w/ 2-1/2”x3” flag - 10 BDL
65601 White flagging 1-3/16x100yds.-300 ft.65602 Red flourescent flagging 1-3/16x50yds. -150ft.65603 Pink flourescent flagging 1-3/16x50yds.-150ft.65604 Lime Green flagging 1-3/16x50yds.-150ft.65903 Blue flagging 1-3/16x100yds.-300ft.65905 Yellow flagging 1-3/16x100yds.-100ft.
Pennant Flags
14991-79• 10RL Yellow Flags/
Box
2473W100 100ft. Steel Tape - White Epoxy2473W200 200ft. Steel Tape - White Epoxy2473W330 330ft. Steel Tape - White Epoxy
Laser Levels
PLS180 • 180 degree fan angle• Plumb and level line too• Features new, unique
optic technology• Runs on 3 included AA-
batteriesPLS3 Dot Plumb Level Square Laser Tool PLS5 Laser Level Self Leveling 5 Point SystemPLS90 Self-Level Laser
LL100-2• A tripod &
grade rod is included with the la-ser & HR320 receiver in one hardshelled, portable system carrying case.
GL422 &GL412• A tripod &
grade rod is included with the laser & HR320 re-ceiver in one hardshelled, portable system carrying case.
Spectra Precision® LaserLL300• The automatic, self-leveling Spectra
Precision Laser LL300 from Trim-ble is the most rugged laser level available, tough enough to handle a wide variety of gen-eral and concrete construction applications.
Laserometer ReceiverHL700• 3yr warranty• Digital readout 2”
above & 2” below on-grade reading
• “Anti-strobe filter
CR600• High, low or on-grade
vtt1,500 ft. radius• Super bright LED
display• 5 on-grade sensi-
tivities to customize for application needs
GR151• 5 section grade rod• 10ths
• 15 feet• Aluminum
GR152• 5 section grade rod• Inches• 15 feet • Aluminum
LL500• One-person leveling
system designed for the most rugged en-vironment. Accurate, stable & reliable.
LL400• Durable, highly accurate
Laser Level • Full automatic, self-
leveling• One button operation
Tripods
Stainless Steel Tapes
Available
See Page 42 for more Measuring & Layout Supplies.
RENTALAdjustable Kicker
Copperhead Laser Screed
Compaction Equipment
Cut-Off Saws
Curb Forms
Decorative Stamp Tools
Grinders
Light Towers
Mutivibe Screed
Power Buggies
Power Tools
Pumps/Water/Grout
Rebar Cutter
Husqvarna Saws
Trowel Machines (Walk Behind & Riding)
Vibrators
Page 40 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SUPER SLAB PACKAGE CUSTOMER:
JOB:
MATERIAL CHECK LIST
Pre-Bid / Take Off Drawings Spec Book General Pricing Gas Powered Tool / Compaction / Adjustable Kicker Vapor Barrier 10 mil / 15 mil Reinforced Rebar Support / Mesh Supports / High Chair / Plastic Chairs Wire Mesh / Expansion Joints Diamond Dowels Perimeter Insulation / DOW / EPS Copperhead / MultiVibe Power Trowels (Riding Trowels) Soff-Cut Saws / Joint Prep Vacuums Curing Compound / FGS-Polishing Dry Shake Hardeners / Grouts / Patches Control Joint Material / Floor Drain “Zurn” Building Maintenance Manager (Owner) - FGS Conditioner
SUPER SLAB PACKAGE CUSTOMER:
JOB:
MATERIAL CHECK LIST
Pre-Bid / Take Off Drawings Spec Book General Pricing Gas Powered Tool / Compaction / Adjustable Kicker Vapor Barrier 10 mil / 15 mil Reinforced Rebar Support / Mesh Supports / High Chair / Plastic Chairs Wire Mesh / Expansion Joints Diamond Dowels Perimeter Insulation / DOW / EPS Copperhead / MultiVibe Power Trowels (Riding Trowels) Soff-Cut Saws / Joint Prep Vacuums Curing Compound / FGS-Polishing Dry Shake Hardeners / Grouts / Patches Control Joint Material / Floor Drain “Zurn” Building Maintenance Manager (Owner) - FGS Conditioner
SALESConcrete Chemicals
Concrete Tools & Accessories
Colored Concrete
Curb Forms
Construction Equipment
Diamond Blades
Mechanical/Electrical Tools
Fasteners
Foam Insulation
Site Tools
Masonry Tools
Power Equipment
Precast/Tiltup
Safety Products
Trench Drain
Waterproofing
Repair Department
Tool Repair• Air/Pneumatic• Gas Equipment• Electric Tools
Large Parts Inventory
MultiQuip Authorized National Service Center
Page 41 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SERVICE
Concrete Calculators
4225• Material cost &
quantity estimations• Concrete areas &
volumes• Includes: User’s guide,
protective case & long life battery
4019• Works directly in Yards,
Feet, Inches, Fractions and Meters – includ-ing Square and Cubic formats
• Quickly and accu-rately find material requirements
• Unit functions estimate material costs instantly
Material Estimator
MEASURING & LAYOUT
66401 (Red)• Ideal for lumber, concrete,
ceramics, and metal • Waterproof - Non-Toxic
Lumber Crayons & Markers
66402 Blue Lumber Crayon
66403 Green Lumber Crayon66404 Black Lumber Crayon66405 White Lumber Crayon66406 Yellow Lumber CrayonPS100 Crayon Holder
Page 42 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SF4100• 4’x100’ Orange
Safety Fence• 30lbs.• Made of durable
polyethylene• Flexible & reusable
15001SM Black - #25 Model
15002-SM Red - #25 Model
Sharpie markers are fade & water resistant. Permanent on most surfaces. Quick drying ink. AP certified non-toxic formula.
Paint Markers
96820 White Paint Marker 48/CAS96821 Yellow Paint Marker 48/CAS96822 Red Paint Marker96823 Black Paint Marker96827 Gold Paint Marker
• New and improved specially formulated paint for industrial
applications• Faster drying paint reduces
smears and removes marks while allowing almost
immediate handling of marked items
AT3701 Flourescent Orange93900 White InvertedETBL2D Blue InvertedSO3641 Flourescent Green Inverted03622 Hot Pink Inverted
Spray Paint
36LATH 36” pine lath stakes48LATH 48” pine lath stakes
Pine Lath Stakes in 36” & 48”
Layout NecessitiesStrait-Line®
Marking Chalk65105
Strait-Line®
Caution Tape662311000ft x 3”
Speed LineLumber Crayon66406Yellow - 12 pieces
Safety Fence
JS25 25ft TapePG1816 6ft Tape MeasurePG1825 25ft Tape MeasurePG1830RG 30ft Tape MeasureTM200 Tally Counter
MP301Keson 36” Steel Single Wheel w/ Folding Handle
MP401EElectronic Counter & 4’ Wheel
Chalk Box - Tape Measures
G10015oz Giant Chalk Box
G3X100Giant Chalk Box3x1 Fast Retrieve
DECORATIVE CONCRETE
Page 43 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Stamp Overlay, Spray Texture & Sealer Colors
SureStamp - Decorative Concrete Stamp OverlaySureStamp is a single component, (just add water) stam-pable cementitious coating, designed for the beautifying of both interior & exterior concrete surfaces.
SureSpray - Decorative Concrete Thin OverlaySureSpray is a single component, troweable or sprayable, cementitious coating for texturing both interior & exterior concrete surfaces. Each design contributes to a non skid cementitious surface.
Micro Topping - Decorative Concrete Micro ToppingSureCrete’s MicroTopping is an extremely versatile & durable cementitious topping for both interior & exterior concrete surfaces. It’s designed for horizontal surfaces, but may be used on vertical surfaces to create a faux Venetian plaster look.
Micro Spray - Decorative Concrete Sprayable Micro ToppingMicro Spray is an extremely versatile & durable single component, cementi-tious coating for both interior & exterior concrete surfaces. It can bring a new consistent & predictable surface to begin staining.
Xtreme Series PreCast MixXtreme Series PreCast Mix is a hybrid GFRC, dual component, pourable con-crete bag mix. An excellent choice for concrete countertops, fireplaces, wall panels & other designs. The high early strength & 6-12 hour cure time allows to fast production & turnaround.
Xtreme Series GFRC Face MixXtreme Series GFRC Face Mix is a hybrid GFRC, dual component bag mix. It is ideal for precast concrete applications that require longer, thin-ner, more flexible & lighter pieces that are not easily accomplished through traditional poured concrete applications. It is sprayed at 1/16” - 1/8” thich & is used in combi-nation with teh Xtreme Series Backer Mix at 1/4” - 1/2” thick. No polymers & no acrylics.
Xtreme Series Backer MixXtreme Series Backer Mix is a high fiber, hybrid GFRC, dual component pre-blended bag mix. This high early strength, intense load of Glass AR fiber adds immediate structuralintegrity to any precast concrete such as Xtreme PreCast, Xtreme GFRC Face. Use of Xtreme Backer Mix is ideal for ap-plications that require longer, thinner, and reduction of weight.
SureSeal Pigmented SealerA 30% solids solvent based acrylic sealer for vrtical or horizontal cementitious surfaces. This product contains a hybrid, self cross linking, acrylic resin with built-in water repellence & tenacious penetration & adhesion. 30 standard colors available. Also available in 5 gallon pail or 55 gallon drum.
CTF-32-CS Capstone Countertop FormCTF-32-OG OG Countertop FormCTF-32-RG Regular Countertop Form
Project using SureSpray - Decorative Concrete Thin Overlay
Projects using SureStamp - Decorative Concrete Stamp Overlay
DECORATIVE CONCRETE
Page 44 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Liquid Integral Color
SOLOMONCOLORS, INC.
This chart is only a guideline. It is strongy recommended that a test slab be poured & approved prior to the start of a job.
Antique Release Agents & Hardners
This chart is only a guideline. It is strongy recommended that a test slab be poured & approved prior to the start of a job.
• Non-fading• Denser, more durable
surface• Improves abrasion
resistance• Can be antiqued and
stained
• Richly pigmented colors• UV-resistant• Use to antique & marbelize• Suitable for all cementitious surfaces
All ColorsIn-Stock
Visit us onfor instructional videos & demos!
jobsitesupply.com
DECORATIVE CONCRETE
Page 45 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
For use in new curb ramps or new construction.Pressed into place in freshly poured concrete Cast-In-Place Tiles have a 1/4” nominal thickness and feature embedment ribs 3” on center through entire length of tile. Plastic sheeting protection covers entire surface of Cast-In-Place Tile.
Surface Applied Truncated Dome Detectable Waring
Systems
ADA Solutions 2’x4’ Cast in Place Panel Detectable Warning Systems
ADA Solutions, Inc. has been the leading supplier of detectable warning surfaces for nearly 15 years.
1STP40 Steg Step Liner 4’ Regular17STP40 Step Liner 4’ Sandstone 28’ BX2STP40 Steg Step Liner 4’ Intermediate9STP40 Steg Step Liner 4” Capstone
• Foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires.• Set up time is minimal (usually the morning of the pour) and they may beremoved early while the concrete is still wet enough to “slick finish” with afoam profile edging tool.• The tie wires are positioned approximately 14” apart with 2” break back.
Poured in Place “Cantilever Forms”
D26 10’ Gray Deck DrainD2T 10’ Tan Deck Drain
Deck Drains
Double wall bonded P.V.C. drain system which remains straighter while concrete is being poured. The .100 thousandths thick top cap is half-lapped and runs continuously across fittings and short sections of base to keep straight lines.The snug fit top cap can easily be removed at cleaning time or be replaced when damaged due to ultraviolet sun rays.
Deck Joint
Provides the necessary crack control, but not sodeep as to interfere with steel placement. In addition to control, it adds a beautifulfinished look.It is cost effectively, durable, and easy to install.With the “T” member ears embedded in concrete, surface water seepage is kept from subsoil.
CS1225 Cs Unitec Wet/Dry Vacuum CleanerEHR20S EHR 20 S Mixer (R)MG 140 5” High Viscosity Mixing Paddle25 GP-WD Portable Mixing Stand Works w/ 5gal BucketEBS 125D Concrete Grinder w/ Dust Extraction253.115 5” Diamond Wheel for EBS 125DBF5-EBS Walk Behind Cart for EBS 125DMG235 9-1/4” Mortar PaddleMH220 9-1/4” Mix & Fold Paddle4CB052GF Core Bit 2” DIA x 12” Depth (R)4CB078UF Core Bit 3” DIA x 12” Depth (R)4CBB102UF Core Bit 4” DIA x 12” Depth4CB152UF Core Bit 6” DIA x 16” Depth4CB204UF Core Bit 8” DIA x 16” Depth
Portable Mixing Stations, Paddles & Accessories
Variable-speed • High-torque • Powerful • Fast
Electric and Pneumatic Portable Hand-held Mixers and Mixing
Stations
LThe ORIGINAConcrete Color
Maintenance System
Original Solid Color Stains Translucent Enhancers
Caramel ORIGINAL Solid Color Stain with Cowboy Dust Translucent color Enhancer
Sierra Caramel Cowboy Dust
Beach House Moonrock Light Gray
PHOTO CREDIT: Staintec
Buffalo Brown Medium Gray
Before After
Moonrock ORIGINAL Color Stain
All colors shown are approximate and, as close as possible, represent concrete with a flat-troweled finish. Jobsite Supply & NewLook International, Inc.™ cannot control (and are not responsible for) application methods, jobsite conditions, finishing techniques, cannot guarantee the final appearance, adhesion or an exact color match. Texturing or finishing techniques, such as brooming or troweling, the use of sealers and slight color drifts in raw materials can produce variations in color. Jobsite Supply and NewLook International, Inc.™ strongly recommend representative jobsite samples (mock-ups) prior to project installation.
Concrete Solid Color Stains & Translucent Color Enhancer
DECORATIVE CONCRETE
Page 46 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Malay Tan StainBuckskin Suede Tone with Carmel Marbling
Cola StainReddish Brown Resem-bling Old Leather
English Red StainTerra Cotta with Rust and Soft Brown Hues
Black StainTortoise Shell Black with Brown Marbling
Aqua Blue StainSoft Blue Patina with Undertones of Green
Golden Wheat Stain Amber hued undertones
Green Lawn StainSoft Grey Green Re-sembling Aged Italian Marble
Vintage Umber Stain Rich Earthy Brown
Acid Stains
SOY • Gel™ S616Removes:• Epoxies, Acrylics,
Urethanes• 100% Biodegradable• Non-Caustic &
Non-Hazardous• Virtually No Odor• Made with 100%
American Grown Soybeans
BEAN•e•doo®M156Removes:• Asbestos Mastic• Carpet & Tile
Mastics• Made with 100%
American Grown Soybeans
Cleaning Solutions
EmergeE1GRemoves: to clean hard surfaces, parts and tools, or as a parts washer solution. Removes dirt and grime easily.
Remove asbestos mastic
Remove carpet & tile mastic
DECORATIVE CONCRETE
DECORATIVE IDEAS AT WORK
STAMP RENTAL
IN STOCK
SEE jobsitesupply.com
FOR STAMPINGACCESSORIES
& TOOLS
Page 47 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
15 Gallon Mixing Barrel46250
Mixing Paddle47405
Spike Shoes46106
Magic Trowel47415
Decorative Overlay Gauge Rake w/ Adjustable Cams57001
Microtopping/Overlayment Squeegee78126
Decorative Stamps
Roman Slate
Italian Stone
Old Granite
Texture Skins
Bill Banger
Texture Strip
S-Curve Tool
DECORATIVE CONCRETE
Lithochrome® Color Hardener
FOR PROFESSIONAL USE ONLY
C o l o r S e l e c t i o n C h a r t A – 1 3 2 . 0 2
www.scofield.com
LITHOCHROME® Color Hardener,LITHOCHROME® Antiquing Release & SCOFIELD® Texturetop®
COVERAGE RATE FOR COLOR HARDENER: Coverage rates vary with intended use and application. LITHOCHROME Color Hardener should be applied at a rate of 60 lb (1 bag) per 100 ft2 (3.0 kg/m2), except where indicated by an asterisk(*). *Denotes colors requiring a higher coverage rate, where Scofield recommends 90–120 lb per 100 ft2 (4.5–6.0 kg/m2). See reverse for more information.+$$ = Check current market price.Colors are approximate and best viewed in daylight. Colors shown represent the use of LITHOCHROME Color Hardener with a flat-troweled finish which has been cured with color-matched LITHOCHROMEColorwax or COLORCURE Concrete Sealer.
L. M. Scofield Company 1 800 800 9900
A-24 Russet*
A-21 Deep Charcoal*
A-59 Beige Cream*
0568 Blush Beige* *
4948 Smoke Beige**
A-33 Classic Gray*
A-57 Platinum Gray*
A-25 La Crescenta Brown*
0266 Ash White*
1139 Burberry Beige*
4471 Saddle Brown*A-55 Pecan Tan*
A-28 Tile Red *
A-27 Dark Red *
A-51 Steadman Buff*
1138-S Blue Smoke+$$
A-26 Brick Red*
3611 Oyster White*
A-50 Slate Gray*
A-53 Arizona Tan* �
5183 Stone Gray*
A-29 Terra Cotta* 5921 Walnut 5758 Weathered Sage*
PRODUCT DESCRIPTIONS:
LITHOCHROME® ColorHardener is a dry-shakecolored hardener formulatedto be easily incorporated intothe surface of freshly placedconcrete.
LITHOCHROME® AntiquingRelease is a powdered,colored bond breaker usedwhen imprinting with mat-typetexturing skins or stampingtools.
SCOFIELD® Texturetop® is atrowelable cementitioustopping for resurfacing andtexturing nonmoving, interioror exterior concrete floors orhardscapes.
LITHOCHROME® ColorwaxTM &COLORCURE® Concrete Sealerare available in matchingcolors.
Additional colors available:A-11 Concrete Gray, 6016
White, 0510 Black.
Review Tech-Data Bulletinsand MSDS before use.Visit www.scofield.com for themost current versions.
• BETTER COVERAGE RATES RESULT IN REDUCED INSTALLATION COSTSBy using properly graded aggregates in our colorhardener we are able to extend our surface coverage rates. Most manufacturers recommend using 60 pounds per every 100 square feet. Our color hardener recommendation is for 50 pounds per every 100 square feet. For this reason we have gone to 50-pound packaging for convenience and to help reduce the freight costs of transporting material. The reduced weight per package also helps to reduce the likelihood of employee injuries on site.
Typical aggregate size
distribution
Gap-graded or “well graded” aggregates
reduce voids & increase strength
LITHOCHROME Color Hardener is manufactured withwell-graded aggregates resulting in better suspension atthe surface of the concrete in its plastic state, allowingfor complete coverage using less material.
Based on 2”x2” cube compressive test, Lithochrome Color Hardener provided superior compressive strength after 31 days over competing color hardener products.
PRODUCT DESCRIPTIONS:
CHROMIX® Admixtures For Color-Conditioned®
Concrete
Add strength and beauty to both vertical and horizontal construction projects withCHROMIX Admixtures. The reliable, nonfading and consistent coloring admixturesfor cast-in-place and precast concrete have been proven tostand the test of time.
Available in three convenientforms:� CHROMIX P (powdered)� CHROMIX ML (mixed liquid)
in buckets and totes� CHROMIX L (liquid) available
through selected ready-mix suppliers
The most popular colors areshown on this color chart. Morethan 400 color formulations arereadily available, in addition toour custom matching service.
Beauty, Durability and ValueCHROMIX Admixtures providestreak-free color-conditioning and performance characteristicssuperior to concrete colored with raw pigments.
LITHOCHROME® Colorwax™ and COLORCURE® Concrete Sealerare available in matching colors.
SCOFIELD® Texturetop® is alsoavailable in colors to approximatethose shown.
Review Tech-Data Bulletinsand MSDS before use.
Visit www.scofield.com forthe most current versions.
* Porcelain Gray and Shadow Slate are only available in CHROMIX P (powdered) form.Colors shown approximate the color of broom-finished concrete flatwork made with a medium-gray cement and curedwith LITHOCHROME Colorwax or COLORCURE Concrete Sealer in the matching color. Concrete not so cured will haveless brilliance.Concrete should be batched and placed in accordance with Tech-Data Bulletins.Concrete color is altered by many factors, including cement and aggregate color, slump, finishing practices, and curingmethod. Using the contemplated materials and construction techniques, representative samples should be cast forapproval, especially when exact color matching is important.
C o l o r S e l e c t i o n C h a r t A – 3 1 2 . 1 5
www.scofield.com
CHROMIX® Admixturesfor Color-Conditioned® Concrete
L. M. Scofield Company 1 800 800 9900 FOR PROFESSIONAL USE ONLY© L. M. Scofield Company 2009 – All rights reserved. CHROMIX, COLORCURE, LITHOCHROME, SCOFIELD, , Color-Conditioned, Colorwax, and Texturetop are trademarks of L. M. Scofield Company.
SA-CA-09
C-27 Westwood Brown
0288 Autumn Beige
C-26 Antique Cork
3987 Porcelain Gray*
C-25 Sombrero Buff
5234 Summer Beige
C-20 Limestone
5059 Sorrento Red
5238 Sunbaked Clay
C-32 Quarry Red
C-15 Coachella SandC-14 French Gray
C-12 Mesa Beige*
1266 Cool Gray
1017 Barcelona Brown
C-22 Coral Red
6063 Winter Beige
5130 Spring Beige
C-24 Charcoal
C-31 Shadow Slate*�
C-11 Desert Sand
C-34 Dark Gray 1010 Brownstone C-21 Adobe Tan
Chromix® Integral Colors
Page 48 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
#1 - Level, patch and repair as needed
#2 - Grind to your desired finish
#3 - Harden and densify your polished concrete with FGS/Hardener Plus
#4 - FGS/PermaShine polished concrete. See the results for years
Call Jobsite Supply for Certified Applicators of FGS PermaShine!
DECORATIVE CONCRETEPolished Concrete
Step 1Choose Grade
• Grade I - Cream Finish
• Grade II - Salt & Pepper Finish
• Grade III - Aggregate Finish
Step 2Choose Class
• Class I - Low Reflectivity, 400 Grit
• Class II - Medium Reflectivity, 800 Grit
• Class III - High Reflectivity, 1500 Grit
Step 3Choose Color
Color that Sticks to Its Mission.Get color into polished concrete...and keep it there.
Page 49 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
HAND TOOLS
Page 50 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
213-9ST 9” Ironworker PliersD2000-7CST 7” Ironworkers PliersD2000-9NE 9” High Leverage Side Cutting PliersD2000-9ST 9” High Leverage Ironworkers PliersD201-7CST 7” Side Cutting PliersD213-9NE 9” High Leverage Side Cutting PliersD213-9ST 9” High Leverage Ironworkers Pliers
32477 10-in-1 Screwdriver/Nut Driver
5459T Leather Erection Wrench Holder5417 Leather Bull Pin Holder with Tunnel Loop
3262 15/16” Barrel Type Drift Pin3255 1-1/4” Broad Head Bull Pin3256 1-1/6” Broad Head Bull Pin3246 7/8”x36” Round Connecting Bar3210 1/2” Erection Wrench for US Heavy Nut3212 3/4” Erection Wrench for US Heavy Nut3222 3/4” Erection Wrench for US Regular Nut3239 Adjustable Head Construction Wrench
70050614” Long Handle Floor Scraper
147751-1/2” x 3 - 1/2” x 16’ Screed
7002273-1/2” x 16” Mini Slick Magnesium Float
700524 1-3/4 x 6’ Snap Handle38 Red Rubber Float145 16x3 Magnesium Float Wood Handle148 16 x3-18” Magnesium Float SF Handle840 6 x 3 x 1 Rub BrickMXS56D Xtralite Finish TrowelMXS66RED 16 x 4 Finish Tri-RND FE CurvMXS81RE 18” x 4” Finish Trii-Fully RD WoodRL6 Leveler Bullfloat BracketSP16 16 x 3-1/2 Pool Trowel CH145D 16 x 3 Magnesium Float Dura-Soft Handle148D 16 x 3-1/8 Magnesium Float w/ Dura-Soft Handle16-MRL Large Mini Rock-It 1-3/4 Adapter16-RKT-N Rock-It Adj Bull Float Bracket
17-8ASU JS-Blue Snap Handle 1-3/4” x 6’700780 48” Cleform Weighlite Broom
BFKIT5Complete Bull Float Kit
OAP927All Aluminum, Red HDL Kumalong
7007124526D 16” Canvas Resin Float
700820 #14572 4” x 24” Unimixer701037 1” x 2” x 10’ Aluminum Straight Edge701048 HWY Lute Socket for 702366702366 30 x 3 x 1” Lip HWY Lute Blade704419 #13987 4’ Big Blue Float704559 Open Style Rebar Cutter/Bender704639 #7239 Rebar Hickey Bender704801 #7259 3’ x 3-1/2” Resin Darby704858 Cleform Wizard Bar 48” x 7/8”704870 T-Probe Steel790270 4’ Round End Channel Float8043872 6’ Post Hole Tamping Bar
70226548” R/E Bull Float Blade
706164148LRWThinline Float
700524M1 x 3/4 x 6’ Lightweight Magnesium Snap Handle
693SharpShooter I Hopper Gun
Tools
Tie Wire & Contractor Wire
MMW 16 Gauge Tie Wire
MMWSSSharkskin 16 Gauge Epoxy Coated Tie Wire
6051569 18” Bolt Cutter6051577 24” Bolt Cutter6059884 36” Bolt Cutter
• Rubber Handles
• Chrome Vanadium Steel
Drillco Cutting Tools
Stocking a wide range of cutting tools:
General Purpose HSS Jobber Length Drill Bits
• Fractional 1/16 to ½” 118 degree black
Nitro Heavy Duty Mechanic Length
• 1/16” to ½” with 3 milled flats• Black and Gold Surface Treatment• Used on Hard Metals and Stainless Steels• Also available in Stubby Lengths
HSS Hand Taps-Plug Style
Sizes:• 6-32,8-32,10-24,12-24,1/4-20 and 3/8-16• Other sizes available upon request
Silver & Deming Bits
• 1/2” to 1-1/2” with 1/2” Shank
Fiberglass Extension LaddersD6200 Series - Type 1A - 300lb. Rated• Base & fly separate to use base as separate ladder• Slip resistant Traction-Tred® D-rungs• Heavy duty pulley with rope; Rope clamp ties rope
to rung• Compliance: ANSI A14.5/OSHA
Fiberglass Step Ladders6200 Series - Type 1A - 300lb. Rated• Fiberglass rails with pinch
proof spreaders• Double riveted Traction-
Tred® steps• Compliance ANSI A14.5/
OSHA
Model Size Bottom Width Spread6204 4’ 19-7/8” 29”6205 5’ 21-5/8” 35-1/8”6206 6’ 23-3/8” 41-1/4”6208 8’ 26-7/8” 53-5/8”6210 10’ 30-3/8” 65-7/8”6212 12’ 33-7/8” 78-1/4”
Model Size Standing Level
Bottom Width
Weight
D6216-2 16’ 13’ 19” 36D6220-2 20’ 17’ 19” 44D6224-2 24’ 21’ 19” 52D6228-2 28’ 25’ 19” 59D6232-2 32’ 29’ 19” 71D6236-2 36’ 32’ 19” 84D6240-2 40’ 35’ 19” 92
Page 51 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Re-Chargeable Battery Operated Re-Bar Tying Tools
RB397• 5 times faster than hand
tying• Lithium-ion battery• Approx. 2,000 ties per
charge• Applications: Building
foundations, precast concrete products, floors & walls, retaining walls & swimming pools
MAX RE-Bar-Tier™
Large Capacity Re-Bar Tool
RB655• Makes ties in approx 1
second with consistent tie strength
• High speed saves you time & money
• Wire usage is regulated automatically
• Applications: Commercial building, road & bridge construction, foundations, precast plants, radiant heating tubes, electrical conduits
Sprayer AccessoriesNozzles - Repair Kits - Extensions
JS1993 3.5 Gallon Sprayer• NEW Holster for wand & nozzle
storage• NEW Metal Ergo pump handle• Fremale brass fan nozzle at-
taches directly to shut-off or extension (.5gpm & 1.0gpm included)
• 14” Heavy duty hose• Wide mouth opening for easy
filling/cleaning• Tri-poxy® coated steel tank
rinse cleaner• Shut-off with lock-on spraying
feature
HAND TOOLSChapin Xtreme Sprayer
Sprays up to 30- 35% Solids
6-600 Adjustable brass nozzle for sprayers6-5797 Brass fan nozzle for 1949-male thread1-5943 1GPM brass fan nozzle - female thread6-7703 24” brass curved extension with male
end for 1954 sprayer6-7704 24” brass urved extension with female
ends for 1949 sprayer6-7711 18” curved extension male end for
1954 sprayer6-4627 Repair kit for 1954 sprayer - also fits
1280 & 2123 sprayers6-6091 48” hose assembly for 1954 sprayer6-613 42” nylon reinforced hose with
connector & clamp
Tie Wire
For use with Max Tools 14.4 Volt Re-Bar Tying Tool
MAXTW1525 Max 16 Gauge Tie Wire (RL)MAXTW897 Max 21 Gauge Tie Wire (RL)
The Lock-In Accessory System lets you customizeyour ladder top and safely secure your tools.
Ladders
Molded rung braces
Rope clamp ties rope to rung
Rugged gravity spring locks operate smoothly
Slip-resistant Traction-Tred® D-rungs
Heavy duty pulley with rope
Direct rung to rail connections
External guides at top of base section securely interlock rails
Interlocking side rails
Base & fly separate easily to use base section as single ladder
Internal guides on bottom of fly section securely interlock rails
Durable rail shield bracket & shoe with Shu-Lok®, slip resistant pad & spur plate
E3-16C
E3-16C 16oz Curved Claw HammerE3-165 16oz Straight Claw HammerE3-205 20oz Straight Claw HammerE3-245 24oz Straight Claw Hammer
Hammers & Pry Bars
JS1993 Sprayer
Page 52 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Groovers & Trowels
HAND TOOLS
www.jobsitesupply.com TOLL FREE 1-800-874-7415
CF216C 14”x3” CB trowelCF304 10”x14” float trowel blade (slip on)CC275-01 10”x18” HD float trowel blade (slip on)CC380 9x12 Power Groover - 3/4” BITBRKT
CF141 6”x3”1/4”R Curved end edger w/ wood handles SS
CF146 6”x4”1/2”R Outside curb & sidewalk tool SSCF149 6”x8” Edger/grooverCF165 6”x4-1/2” Stainless EdgerCF165PF 6”x4”x1/2” RAD Edger PF HandleCF166 8”x4”1/2”R Cement edger w/ wood handle
SS
Stainless Steel Edgers
CC152• Stainless Steel• Extra smooth
Denver Slider Knee Boards
EZY-Tilt II Float Bracket 6 Hole
CC294• Made of rugged
lightweight aluminum• One to one turning ratio
of handle and pitch of blade
CC296 KnuckleHead II Bullfloat Bracket
Concrete Chutes
CC992F• Constructed of
heavy gauge aluminum
• Reinforced with cross braces & flanged edges
Chamfer Hand Edger
14816-34• For 16” form tube • Made of long wearing
bronze with 1” lip• Belt polished surface
for clean, smooth edges
Buckaroo with Level - Handle
CC421L 4” Buckaroo w/ Level Vial
4’ x 7-1/4” Wood Bullfloat
CC782-01• Long lasting, laminated float with bracket• Brass threaded inserts for superior strength
48” Fresno Trowel
CC834-01• All angle steels • Available in round or square end• Fitted with 360 degree all angle bracket
Magnesium Float w/ Handle
CF016PF• Superb floating action• Soft textured ProForm handle with special
ribbing for that “Great Grip”• Tough durable Extru-Lite Magnesium blade
CF194 Gutter Tool 3” RadiusCF385 Sonotube EdgerGG432 MSN 5”x2” Margin TrowelWL088 1” DBL Felt Leather Knee PadGG630 Big John HD Pry Bar 56” 14”WL069 EZ Kneeler Kneeboard
Other Items
Tools
Vari-Strut Door Buck Brace11-129• Adjustable from 5’ 9”
to 10’ 6”• Plated throughout to
resist rust• Brace struts to floor or
ceiling
Handicap Float12-517-B8• 42” long - 8” wide• Makes 3/8” deep
by 3/8” wide penetrations on 2” centers
• Meets the handicap ramp specifications of many states
11-305B5 Brick Tile Wheebarrow11-890 Adjustable Backer Rod Tool12516B6 Handicap Ramp Hand Float 10x812564B6 Single Cutter Handi Ramp Float12-864-B9 6”x6”x45 Chamfer Edger14-487 Band Tightener-Tensioner14-660 6-1/2’ Gammon Reel14712B10 8” Razor Scraper 39-59” Adjust19-113-B7 Crack Filler/Pouring Pot22556B6 Handicap Walking Groover
Grease Guns
NATIONAL SPENCER
Zinc Plated Pistol Grip Grease Gun with 12” HoseHD4A• Lever Style Grease Gun with variable stroke
Drum Pumps
Drum Pump381-4• Fits 15 through 55 gallon drums with 2” opening• Dispences approximately a pint per stroke
Page 53 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
HAND TOOLS• For use on walk-behind & ride-on
power trowels• Silver polished blade gives maximum
flext to ensure a smooth finish.
WX1014FO 10”x14” float trowel blade (slip on)WX1018HD 10”x18” HD float trowel blade (slip on)WX614F 6”x14” finish trowel blade (bolt on)WX618F 6”x18” finish trowel blade (bolt-on)
WX Series Blades
C6TC14
Wheelbarrow
• 6 cubic foot seamless steel tray
• Total control grips are injec-tion molded from tough, lightweight polypropylene for maximum performance and durability • 6 cubic foot seamless steel tray
Available Through Jobsite Supply!
• 6 Cubic Foot Capacity Steel Tub• Steel Handles with Rubber Grips• Foam Filled “No Flat” Tire
• 6 Cubic Foot Capacity Steel Tub• Hard Wood Handles• Pneumatic 2-ply Rubber Tire
Wheelbarrow
Shovels
Seymour SV-DR42 28” Round Point Shovel W/ Fiberglass Handle, Poly D Grip, #2 Front Turn Step & 8.8” x 11.5” Head
Seymour SV-DS43 28” Square Point Shovel W/ Fiberglass Handle, Poly D Grip, @3 Front Turn Step & 9.7” x 11.5” Head
Seymour SV-DD46 28” Drain Spade W/ Fiberglass Handle, Poly D Grip, Front Turn Step & 5.5” x 16” Head
WB-6SHDS
WB-6S
M6
BP8
• 6 cu.ft. capacity• 16 guage seamless
tray• 16” wheel assembly
with pneumatic• 2-ply tire and ball
bearings
• 8 cu.ft. capacity• Corrosion proof poly
tray• Two 16” pnuematic
tires
SV-DR42
SV-DD46
SV-DS43
77315Wheelbarrow from Orgill
IN STOCK
1328400Jackson #2
Asphalt ScoopSV-LS31 Long Handle Square Point - WoodSV-LS41 Long Handle Square Point - FiberglassSV-LS-11 Long Handle Square Point - PromoSV-LR30 Long Handle Round Point - WoodSV-LR40 Long Handle Round Point - FiberglassSV-LR10 Long Handle Round Point - Promo
HAND TOOLS
AviationSnips - 10”• Have multiple pivot pins that providecompound cutting action
• Hot drop forged steel blades providemaximum strength
PART NO. Cutting Pattern2073111 Cuts left and straight2073112 Cuts right and straight2073113 Cuts left and straight
IRWIN®Bi-MetalUtilityBlades• Welded Bi-Metal for sharp edge andflexible body• Stay sharper3X longer thantraditionalcarbon blades
PART NO. Description2084400 100 pack
FoldingUtilityKnife• Compact rugged design• Quick-Change Button™ for easyblade changes
Part No. 2089100
100’Speed-LineChalkReel• Locking metal handleminimizes tangles
Part No.64310
QUICK-GRIP®BarClamps• 24” length, 3-1/8” throat depth• I-beam bar reduces flexing and bowing
Part No. 223124
StandardRetractableUtilityKnife• Includes 1 IRWIN BLUE BLADEBI-Metal utility blade
Part No. 2082101
15”ProTouchSaw• 9 point tooth count
Part No. 2011201
STRAIT-LINE®Caution Tape• 1000 ft. x 3”
Part No. 66231
VISE-GRIP®Curved JawLockingPliers• 10” length, 1-7/8” jaw capacity
Part No. 4935576
Speed-Line LumberCrayon• Yellow, 12 pieces
Part No. 66406
VISE-GRIP®11”LockingC-ClampwithRegular Tips• 10” length, 1-7/8” jaw capacity
Part No. 19
STRAIT-LINE®MarkingChalk• 5 lb. orangehi-vis
Part No.65105
IRWIN®ClassicSawBlade• 7-1/4” x 24T, ATB• For Framing/Ripping/Decks
Part No. 25130
MARATHONSawBlade• 7-1/4” x 24T, ATB• FASTEST FRAMINGBLADE EVER™
Part No. 24030
IRWIN®MetalCuttingSawBlade• 7-1/4” x 48T, MATB• For steel/thin steel
Part No. 4935555
Page 54 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
MFG# Twister-XL28-15• High performance in both
fixed & portable drilling • NOMO (Nitride on Margin
Only) increases surface hardness & extends tool life
• Recommended for tough applications & materials including stainless steel
MFG# XLUB16• Formulated to extend tool life
& reduce chip welding• Provides a precision finish
with closer tolerances on finished work
• Clings to tools for a continu-ous shield against friction & heat
• Effective on stainless steel, aluminum & exotic alloys
XL86 & HX80• Designed for aligning &
enlarging holes in structural steel, bridge & ship building
• Hex Shank is engineered to enable use in impact socket
• heavy duty reaming of off-size, misshapen & misaligned holes
HSS Annual Cutters• High speed annual cut-
ters (M2) which features Champion’s exclusive Plus 20 surface treatment
• Provides cleaner cuts• Positive slug ejection &
longer tool life
Your Source for Innovative Cutting Tools
HX80-13/16 Hex Car Reamer 13/16” Straight HX80-15/16 Hex Car Reamer 15/16” StraightHX80-1-1/16” Hex Car Reamer 1-1/16” Straight Twister XL28-15 Twister 15 Pc Mechanical Drill SetUS5-10 #10 HSS Jobber Drill Bit 118*US5-11 #11 HSS Jobber Drill Bit 118*US5-20 #20 HSS Jobber Drill Bit 118*US5-3 #3 HSS Jobber Drill 118*US5-42 #42 HSS Jobber Drill 118*US5-47 #47 HSS Jobber Bit 118*XLUB-WAX16 17oz Brute Lube Cutting WaxXLUB-16 Brute Lube Cut & Tap Fluid 16ozXL200P Pilot Pins for XL200 CutterXL200-1 1”x2” Annular Cutter HSSXL200-13/16 13/16”x2” Annular Cutter HSSXL200-15/16 15/16”x2” Annular Cutter HSSXL200-1-1/16 1-1/16”x2” Annular Cutter HSSXL300P Pilot Pin for XL300 CutterXL300-13/16 13/16”x3” Annular Cutter HSSXL300=15/16 15/16”x3” Annular Cutter HSSXL300-1-1/16 1-1/16”x3’ Annular Cutter HSSXL86-13/16 Hex Bridge Reamer 13/16” SpiralXL86-15/16 Hex Bridge Reamer 15/16” SpiralXL86-1-1/16 Hex Bridge Reamer 1-1/16 Spiral405-F Letter F HSS Drill 118 Bright
HAND TOOLS
PFE-69846 4-1/2” x.045x7/8”Cutting for Metal Type 1PFE-63162 4-1/2”x.045x7/8” Cutting for Metal Type27PFE-63114 4-1/2”x3/32”x7/8”Cutting for MasonryPFE-61038 4-1/2”x1/4”x5/8-11”Grinding for MetalPFE-61026 4-1/2”x1/4”x7/8” Grinding for MetalPFE-61042 6”x1/4”x5/8-11 Grinding for MetalPFE-69865 6”x.045x7/8” Cut-off for Metal Type 1PFE-63164 6”x.045x7/8” Cut-off for Metal Type 27PFE-61006 7”x1/4”x5/8-11 Grinding for Metal
Grinding & Cutting Wheels
Chop Saw BladesPFE-64502 14”x3/32”x1” Chop Saw Blade
PFE-64014 12”x1/8x1 Blade for MetalPFE-64012 12”x1/8x20mm Blade for MetalPFE-64402 14”x1/8x1 Blade for MetalPFE-64236 14”x1/8”x20mm Blade for MetalPFE-64232 12”x1/8”x20mm Blade for ConcretePFE-64234 12”x1/8”x1” Blade for ConcretePFE-64016 14”x1/8”x20mm Blade for ConcretePFE-64238 14”x1/8”x1” Blade for ConcretePFE-64018 14”x3/16”x1” Blade for Concrete
Blades
2218 18” Medium Brown Plastic2224 24” Medium Brown Plastic2236 36” Medium Brown Plastic
No. 21 Concrete Finishing BrushesStaple set in clear lacquered hardwood block with one threaded handle hole. Three rows of filling material.
No. 22 Line Garage BrushesCoarse Brown Plastic. Staple set in clear lacquered hard-wood block. Will not soften when exposed to water, oils
or greases
2124 24” Finish Black Poly2136 36” Finish Black Poly2148 48” Finish Black Poly2124-22 24” Finish Broom Red Bristle2136H 36” Horsehair Finish Broom2136-22 36” Finish Broom Red Bristle2148H 48” Horsehair Finish Broom2148-22 48” Finish Broom Red Bristle
Brushes, Brooms & Accessories
232 1-1/2” Chip Brush233 2” Chip Brush234 2-1/2” Chip Brush235 3” Chip Brush236 4” Chip Brush
Chip Brushes100% White bristles. Single thickness. Smooth sanded
handle with tin ferrule. Length of Trim: 1½ inches.
Made of best quality selected broom corn and fibre. Sewed 4 times and
reinforced with a wire band.
Counter Duster: Filling material is staple set in clear lacquered hardwood block. Hang up hole in handle. Brush face length: 9 inches. Overall length: 13½ inches.
Wax Applicator: Two piece clear lacquered hardwood block, plated bolts and wing nuts.
Pad is made of synthetic lambs wool.
2124TPN 24” Straight Squeegee2136TPN 36” Straight Squeegee
4630TPN 30” Curved Squeegee4636TPN 36” Curved Squeegee
Other Products & Accessories
7SC Wire Brush Curved with Scraper9SCO25 1/4” Roller Cover 9”9SC038 3/8” Roller Cover 9”9SC075 3/4” Roller Cover 9”900-516 9” Roller Frame561 Water Brush/Red HandleMET-100 9” Metal Roller Paint Tray18SC038 18” Roller Cover 3/8” NAP18SC075 18” Roller Cover 3/4” NAP1800-112CAP 18” Roller Frame Caps1800-112 18” Roller Frame
54
2210N
Warehouse Corn Broom5032
Squeegees
Page 55 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
HAND & POWER TOOLS
Page 56 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
ALSO AVAILABLE
FROM
Page 57 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
POWER TOOLS
* Maximum initial battery pack voltage (measured without a workload) is 12 volts. Measure under a workload, nominal voltage is 10.8.
See the Next Page for Corded Power Tools &
Accessories from
POWER TOOLS & ACCESSORIES
See Page 56 for Additional Hand Tools from
* With respect to 12V Max*, maximum inital battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8.* With respect to 20V Max *, maximum inital battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.Speed and runtime claims are versus leading 18 volt lithium ion tools. Weight blaim is versus DC9096. Copyright ©2012 DeWALT. The following are trademarks for one or more DeWALT power tools and accessories: the yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tools.
Page 58 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
1/2” Magnum Drill with Keyed Chuck0299-20• 8.0 amp motor, 0-850 RPM• Variable speed control• 360 locking side handle
13 Amp Super Sawzall Reciprocating Saw6536-21• 0-2800 SPM variable
speed trigger• Quik-Lok blade clamp
14” Abrasive Chop Saw6180-20• 15 amp, 5.4 max HP motor• 10,000 RPM• Quick change abrasive wheel
system
Deep Cut Portable Band Saw632-6N• 10.5 amp motor• Trigger speed control: 0-420
sfpm• 4-7/8” Cutting Capacity
Tilt-Lok 7-1/4” Circular Saw6390-21• 15.0 amp motor, 5,800 rpm• Tilt-Lok main handle adjusts
to the work• Superior blade visibility from
either side
POWER TOOLS
Page 59 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
11 Amp Sawzall Reciprocating Saw6509-31• 11.0 amp Milwaukee-built
motor • 0-2800 SPM variable speed
trigger
2601-22 18V 1/2” Compact Driver Drill Kit
Bi-Metal Reciprocating Saw Blades• Long Life - patented tooth design provides long blade life• Efficient Cutting - optimized for specific applications• Durable Construction - shatter resistant, bi-metal designprovides the flexibility and durability single-metal blades can’t
Part No. TPI Length x Width x Thickness Pack22754OSB818R 18 8 x 3/4 x .035 5022751OSB618R 18 6 x 3/4 x .035 5022758OSB110R 10/14 12 x 3/4 x 1.3 5022756OSB614R 14 6 x 3/4 x .035 5022757OSB624R 24 6 x 3/4 x .035 5022750OSB656R 6 6 x 3/4 x .050 5022753OSB810R 10 8 x 3/4 x .050 5022755OSB156R 6 12 x 3/4 x .050 5022761OSB610R 10 6 x 3/4 x .035 50
Gold® Reciprocating Saw Blades• Extended Blade Life - reinforced tooth design and precisionapplied titanium coating dissipate heat• Faster Cuts - titanium coating makes teeth more wear resistantso they stay sharp for quicker cuts• Durable Construction - Bi-metal design stands up to the mostdemanding applications
Part No. TPI Length x Width x Thickness Pack21070818GR 18 8 x 3/4 x .035 521067614GR 14 6 x 3/4 x .035 521069618GR 18 6 x 3/4 x .035 521062956GR 6 9 x 3/4 x .050 521064610GR 10 6 x 3/4 x .035 521065810GR 10 8 x 3/4 x .050 521072624GR 24 6 x 3/4 x .035 521061156GR 6 12 x 3/4 x .050 5
Bi-Metal Hole Saws• Durable - TUFF TOOTH design is reinforced to cutstronger and last longer• Long Lasting - Patented VARI-TOOTH® design resiststooth strippage• Stays Sharp - high speed steel teeth resist breakingand offer extended life• Withstands High Torque - thick backing plate with holesfor drive pins resists damage due to high torque
Part No. Diameter Pack3001212L 3/4” 13001616L 1 13002020L 1-1/4” 13002828L 1-3/4” 13003434L 2-1/8” 13004040L 2-1/2” 13004444L 2-3/4” 13004848L 3” 13005656L 3-1/2” 13007272L 4-1/2” 13008080L 5 13009696L 6 1
Metal Cutting Circular Saw Blades• Extended Life - titanium carbide tipped resistsmaterial build-up on teeth• Clean, Cool Cuts - less burr than abrasive bladesno need for secondary grinding• Modified Triple Chip Grind -for added durability• Resharpenable
Part No. Description21885ST900048CT 9” x 48T21884ST800050CT 8” x 50T
WOLF-BAND® Band Saw Blades• Long Lasting - high speed steel teeth providea strong, long lasting cutting edge• Shatter Resistant - Bi-metal blades bend andresist breaking and extend blade life• Exceptional Value - professional performanceand competitive pricing provide extraordinarycost-per-cut value
Part No. Description800938PW14185 7/8 x 1/2 x .020 14/18 TPI
9 Piece General PurposeHole Saw Kit• Includes: 7/8”, 1”,1-1/4”, 1-3/8”,1-1/2”, 1-3/4”,2-1/8” hole saws;SNAP-BACK arbors:5L, 6L; and moldedcase
Part No. 30807700G
Aviation Snips Straight• Long Blade Life - precision-formed blades• Comfortable Grips - over-molded handleswon’t slip or twist
Part No. 22103103
Gripple Cable Hanger System
The Original Metal Framing System
*Call for availability
*Call for availability
Chop Saw
Corded & Cordless Drills
Corded Saws
Sawzalls
www.jobsitesupply.com
POWER TOOLS
3/8” Right-Angle Drill1132VSR• 3.8 amp all ball bearing
motor, 0-1100 RpM• Variable speed dial• Ideal for drilling in tight
spaces
14.4 V Brute Tough™1/2” Drill/Driver35614• 550 in. lbs. torque &
0-500/0-1700 RPM• 25 position clutch• 2-speed gearbox
18V Litheon Brute Tough™ Drill/Driver37618-01• 2X battery life• High torque mode produces
over 650 in. lbs.• High speed mode produces
1,800 RPM
18V Litheon 1/2” Hammer Drill Driver17618-01• 2X battery life• High torque mode produces
over 650 in. lbs.• High speed mode produces
2,050 RPM
36V Litheon Bosch Brute Tough™ 1/2” Drill/Driver38636-01• Performs after repeated
1-story drops• 600 in. lbs. of torque• 15 position clutch
18V Impactor™ Cordless Fastening Driver• Delivers up to 1,350 in/lb of
torque• Category best 3,200 BPM &
2,800 RMP• 1/4” hex drive with quick release
12V Max Pocket Driver™PS20-2A• 100 in. lbs. of torque• Variable speed trigger• 500 RPM
1-3/4” SDS-Max®
Rotary Hammer11263EVS• 13.5 amp• 2 modes of operation,
rotary hammer & hammer only mode
• Variable speed dial
1-9/16” SDS Max®Combination Hammer11240• 10.0 amp• 2 modes of opera-
tion, rotary hammer & hammer only mode
• Vario-Lock™ positioning
SDS-Plus® Chipping Hammer11320VS• 6.5 amp, 0-3500 RPM• Vario-Lock™ positioning• Bit can be angled in any
12 positions• Variable speed trigger
14” Abrasive Cutoff Machine1365• 15 amps, 4,300 RPM• Wrap around side handle
mounts left or right• Wheel rotation carries
sparks, dust & debris away from operator
Top Handle Jig Saw with L-BOXX1590OEVSL• 6.4 amps, 2,800 SPM• 4-position orbital
control• Variable speed dial
5” Tuckpoint Grinder• 10 amps 11,000 RPM• Lock on/off switch• Perfect for concrete
surfacing such as de-burring & refurbishing
7-1/4” Circular Saw with Built-In Rafter HookCS10• 15 amp motor• Adjustable bevel &
depth levers• Soft grip handle
7-1/4” Worm Drive Construction Saw1677M• 15 amp motor• 50” bevel capacity with
positive stop at 45o
• Built-in saw hook
2” SDS-Max® Combination Hammer11245EVS• 14.0 amp• 2 modes of operation,
rotaryhammer & ham-mer mode only
• Variable speed dial
Brute™ Breaker HammerBH2760VCD• 15.0 amp• 43 ft. lbs. impact energy• No load BPM 1400
7-1/4” Magnesium Worm Drive SawSHD77M• Magnesium die-cast
housings make this saw 2 lbs lighter than aluminum models
• 15-amp motor deliv-ers the power to rip through more lumber in less time
• Tough worm drive gearing lasts 5 times longer than hypoid gears
Page 60 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
35-Pound 1-1/8-Inch Jack Hammer Kit11335K• 1300 BPM for breaking
concrete and asphalt, bushing, driving ground rods, scraping floors, digging and tamping
Corded & Cordless Drills
Corded & Cordless Drills
Rotary Hammers
Saws
Grinders
Worm Drive Saw
JOBSITE PROTECTION
Page 61 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Dust ControlCONTROLS DUST
INSTALLS IN MINUTES!• Floor Finishing
• Painting• Demolition
• Window Installation
Wet/Dry Vacuum Cleaner
• 12-Gallon • 5-Horsepower wet/dry vacuum built for
jobsite or garage• Single-stage bypass motor with super
quiet operation• 3-Level filtration system
962-1200
Floor Protection
Builder Board
38”x100’ Heavy Duty Floor Protection
• 38” x 100’ • 48Mil Thick • 100% Recyclable • Heavy Duty
Construction Board For Temporary Surface Protection
Dustless® Wet/Dry Vacuum16003
• Better than a shop vacuum• Switch from wet to dry vacuuming without
changing filters• Designed specifically to capture extra fine
dust• Excellent for drywall, concrete, stone &
fiberglass
Dustless® HEPA Vacuum16006
• Certified to meet EPA Lead-Safe standards• Switch
between wet & dry without stopping• Interior baffle/
wall keeps the HEPA filter dry at all times• Captures particles
down to 0.3 micron• Maintains suction
after ingesting 40lbs of fine dust
13001 Filter Pack Wet/Dry Dustless13141 Pre-Filer Bag Pack of 2 Dustless13201 Dustless Hepa Replacement Filter 1600613301 Dustless Hepa Filter Cover14172 Y Connector 2” Dustless14291 25’ x 1-1/2” Hose Dustless
Work Wear
Protective Work Gloves
34-800 G-Tek Maxifoam- M-L-XL95-809 Brown Jersey Glove34-875 G-Tek Maxiflex Ultimate19D-622 Great White Cut ANSI Level 2 - L-XL19-D330 G-Tek 3GK ANSI Level 4 - L-XL-XXL
• Full cut sizes to fit over clothing
• Constructed with heavy weight PVC
• Jacket, bib pants, detachable hood
• Fits over most work shoes & boots
• High chemical resistance
• 5 buckle available in most sizes
• Slush Boot has no right/no left for a no hassle design
• Sizes Available: 8-16
• Rubber soles
Knee Pads• G340 - Gel Pro with
Velcro• G351 Gel Pro with
Snaps
Slush Boot 5-Buckle Boot
Rain Gear
• Allows Moisture And Vapors To Escape For Curing
• Non-Staining• Re-Usable
www.jobsitesupply.com
G-Tek 3GX ANSI Level 319-D310 L-XL• Poly Coated
Nitrile Glove Gray Dip34-225 M-L-XL
G-Tek Maxiflex Endurance34-845• Foam Nitrile Dotted Palm
JOBSITE PROTECTION
Page 62 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Step n’ Peel Clean Mat
Clean MatsCarpet Shield
Plastic Shoe Covers
Carpet Shield Clear, self-adhering film protects all types of carpeting for up to 30 days without leaving any adhesive residue. Highly resistant to tears or punctures. Ideal for remodeling, painting & moving. Helps minimize clean-up time and damage. (Rev Wound)
CS24200L Carpet Shield 3MIL 24”x200’ CS 30200 Carpet Shield 30” x 200’ 3MIL CS 36200 Carpet Shield 36” x 200’ 3MIL
Clean Mats The Clean Mat is a polyethylene film mat with a tacky surface that removes dust & dirt from footwear & prevents it from being tracked throughout the work area. Each mat contains 30 sheets which are tabbed for easy removal of each layer. Stays firmly in place & is easy to dispose of.
CM2436B4 Clean Mat 24 x 36” Blue 30 SheetsCM3636B4 Clean Mat 36 x 36” Blue 30 Sheets
Plastic Shoe Covers Plastic Shoe Covers are the perfect choice for protection from mud, moisture, scuffs & heel marks. Show your customers that you care by wearing these waterproof, disposable shoe covers.
SC3001PB Shoe Cover Disposable 10PR/BG
Step n’ Peel Clean Mat The Step n’ Peel clean mat is a polyethylene film mat with a tacky surface to remove dust & dirt from footwear. This unique product features a sturdy, reusable platform constructed of rigid polystyrene, available with a nonskid backing that holds it securely to floor surfaces such as carpeting, tile, concrete etc. Containing 30 tabbed layers of film mounted on a black frame.
ADDITIONAL ITEMS
DSPR02 Dust Shield Pro Pole 12’ 2/PKFS24200 Floor Shield 24” x 200’ ClearPS3250 Pro Shield 32” x 50’ Gray 3 MILQS9100 Quick Shield 9” x 100’ RollW3C24600 Window Shield 24” x 600’ MED DUTZU02 Dust Shield Zipper 2PK 3” x 7’
• 32” Inside Diameter• Thicker, More Resilient
HDPE• Complete System for Your
Every Need• All Harware is Galvanized • Sections are Telescopic for
Ease of Storage• Complies with OSHA per
1926.252• Can Be Used For: Roof-
ing, Renovation, New Construction
External Chutes
Internal ChutesLinen Chute
Trash Chute
DURACHUTE™
DURAFLAT™• Economical, Light-Duty Flat Chute
System• Stores & Ships Flat• Easily Assembled Using Standard
Hand Tools• Sections are 4’ in Height (3’6” useable
chute), 1/8” Thick, 30” Wide & Weighs 28lbs each
Our Trash & Linen Chutes are better looking, longer lasting, easier to clean, and require less maintenance. Our trash chutes are also outfitted with the only intake door on the market with both front and back stainless panels and skirts.
*SEE PREVIOUS PAGE FOR JOBSITE SUPPLY BUILDER BOARD & ZIPWALL DUST
CONTAINMENT *
2700-34 3/4” Orange Polystrap 1650 ft.2700-34-250 3/4” Polystrap 250 ft. Roll
JOBSITE PROTECTION
This self contained strapping system weighs only 17 lbs. and packs the power of steel strapping but with the portability of a lunch box. Safely
strap-up jobsite materials for transport with nearly 3000 lbs. of breaking strength.
Features & Benefits• Coil weighs 1/4 the weight of steel
strap coils.• Reduced failure rate compared to steel
strap.• Ease of disposal.• Will not rust, stain or damage product.• Virtually eliminates worker compissues
related to back injuries or skin lacera-tions.
• Strap stays tight and does not loosen.• Ability to retension strap and reuse
strap.• Polyester strap shrinks or expands with
loads.EZ-SK DF-1
Forklift Mounted Dispenser
M370 ORS1100
RBT1000
Round Bundle Tensioner
PLT
Pallet Feeder Tool
MT1
Leverage Tensioning Bar
SBStrap Bean Bag
Page 63 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
JOBSITE PROTECTIONRotomolded Tilt Trucks• Manufactured with traditional rotational molding technology• Easy to handle and maneuver•Forkliftablemodel fully compatiblewith forklifts andmanyautomated lifters• Towable/Trainable models wit pneumatic wheels for smoothmovement over a variety of surfaces (5 mph maximum)
Rotational Molded Tilt TrucksPart No. Usage Type Size CapacityFG130400BLA Utility Duty (RM) 1/2 cu yd 450 lb.FG130500BLA Standard Duty (RM) 1/2 cu yd 850 lb.FG131400BLA Utility Duty (RM) 1 cu yd 850 lb.FG131500BLA Standard Duty (RM) 1 cu yd 1,250 lb.
BRUTE® Round Containers & Lids• All-plastic, professional-grade construction will not rust,chip, or peel and resists dents• Strong, snap-on lids provide secure, stable stacking• Gray, white, and yellow are USDA Meat & PoultryEquipment Group Listed and assist incomplying with HACCP guidelines
BRUTE® Round Containers & LidsPart No. DescriptionFG263200GRAY BRUTE® Container without Lid - 32 gallonFG264300GRAY BRUTE® Container without Lid - 44 gallonFG265400GRAY Lid for 2655 BRUTE® ContainerFG265500GRAY BRUTE® Container without Lid - 44 gallonFG264000BLA BRUTE® Dolly for FG2632, FG2643,
FG2655 ContainersFG265000BLA Universal drum dolly for FG2655
Heavy-Duty Utility Carts• Versatile accessories include full andhalf extension drawers, pneumatic wheels,and bins and hooks
• 500 pound capacity• Black finish• Ergonomically designed handle
Contractor Wheelbarrow• All-plastic, seamless pan resists leaking and cracking• Long-lasting hardwood handles for added handlingstrength and sure movement
Part No. DimensionsFG565861BLA 27-1/2” height, 60” length, 27” width
Structural Foam Tilt Trucks• Durability of modern structural foam technology• Ergonomic “steering wheel” handle forbetter handling• Non-marking casters(FG1011, FG9T15 only)• Fits through standard commercialdoorways and onto elevators easily
• Optional hinged domed lid available• Available in 1/2, 3/4 and 1 cu yd sizes
Structural Foam Tilt TrucksPart No. Usage Type Size CapacityFG9T1400BLA Standard Duty 1/2 cu yd 850 lb.FG101100BLA Utility Duty 3/4 cu yd 600 lb.FG9T1500BLA Standard Duty 1 cu yd 1,250 lb.FG131700BLA Lid for FG9T1500BLA
Part No. Description DimensionsFG450088BLA 2-shelf 39-1/4” l x 17-1/8” w x 33-1/4” h
utility cartFG452088BLA 2-shelf 45-1/4” l x 25-7/8” w x 33-1/4” h
utility cart
Page 64 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Corrugate Washout
1 2 3
Concrete Washouts• Outpak Washout is a universal portable washout for concrete, stucco, mortar, paint, drywall mud & more• Compliant• Highly portable• Easy setup & removal
Trash Bags
• 3 Mil Thick• 20 Per Box• Twist Tie Closure
42 Gallon Trash BagsHK42020B
Sweeping Compounds
1013350050# Wax Based Sweeping Compound
SC100# Oil Sweeping Compound
945-1234044’x4’x14” Corrugate Washout
Rotomolded Tilt Trucks• Manufactured with traditional rotational molding technology• Easy to handle and maneuver• Forkliftable model fully compatible with forlifts and many automated lifters• Towable/Trainable models with pneumatic wheels for smooth movement over a variety of surfaces (5 mph maximum)
Page 65 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
WATERPROOFING
Expanding Waterstops for Concrete Construction Joints
RX 101 - 3/4” x 1”Designed for vertical & horizontal concrete 8” thick or greater.
RX 101T - 1-1/4” x 1/2”Reinforced trapezoidal designed for shotcrete, extreme hot weather & difficult applications.
RX 102 - 3/8” x 3/4”Designed for vertical & horizontal concrete 5”-8” thick.
Voltex®
Voltex Voltex 4’x15’ Voltex DS Voltex DS 4’x15’-5”Seam Tape Seam Tape 3”x50’ (8 rolls per box)
Swelltite®
Pavers Grout or Sand Setting Bed
Aqua DrainSwelltite®
Structural Deck
Swellt SwellTite 40”x37’ (125 SF roll)
UltraSeal®
Ultraseal BT Ultraseal (BT) 4’x25’ RL (100SP) - 30lbsUltraseal SP Ultraseal (SP) 4’ x 25’ RL (100SP)
• Waterproofing• Air & Vapor Barriers• Deck Coatings• Miradrain Technology
PVC Waterstops
Available in several styles & sizes!
• Waterproofing• Joints • Masonry
• Peel & Stick Teflon Cover
• 100% Factory Tested• 8 Ft. Grounded Cord
Waterstop Splicing Iron
CETSEALTUBE• Required for adhering/sealing RX 101 & 102 Waterstops• Caulking Tube available in 20 foil pack for bulk tools• One tube covers 20 LF using 1/4” bead
Product Size Shape LN FT/Carton
RX-101 1”x3/4”x16’x8” Rectangle 100lf. (30.4m)
RX-101T 1-1/4” x 1/2” x 20’
Trapezoid w/ Poly Scrim Reinforcement
120lf. (36.5m)
RX-102 3/4” x 3/8”x33’4”
Half Circle 200lf. (61m)
Waterstop RX Product Table
•10 Times Faster•Lowest Cost per Test•Simplest to Use
Moisture Measurment
880 Rapid RH Kit - 01
Moisture Control
Foundation Protector
WATERPROOFING
Double Leakage Protection for:• Block walls• Poured Concrete Walls• Permanent Wood (PWF)• Insulated Concrete Forms• Existing Foundations
Easy to install
XSM2070 6’9” RollXSM2440 8’ Roll
4028330• 1.9 or 2.5 Amps (Low/ High), 110 V• Airflow: 3000 CFM• Width: 19.125” x 19.5” x 15.2”
Z886 Perma-Trench Draining System• 80” Modular Channel Sections with 20”
Grates• .75% Built-In Slope - Handles greater
flows, uniform slope• Radiused Bottom, Better flow rate, less
solids build-up• Smooth High Density Polyethylene • Structural Composite Interior - 0% water absorption
Trench Drain Components
Z880 Trench Drain - 2-1/2” Wide System
Z884 Perma-Trench 4-3/4” Wide Shallow Trench
Page 66 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
• 7.5 Amps• 140 Pints/Day at AHAM • Multiple Ducting Options• Ability to Perform in Temps Above 90F
The 200HT Pheonix 200 LGR
DehumidifierThe Phoenix Hepa
Air Scrubber
• 2-Speed operation • Multiple ducting options• Built-in manometer• Only 12 amps
The Phoenix Axial Air Mover w/ Focus
• 3000 cfm (High Speed)• Greater air velocities than competitive products• Focused velocities 0 to over 23.5 feet
RESIDENTIAL
Page 67 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
• Scaffold Bracket
• Standard Wedge Bolt
• Waler Bracket
• Heavy Duty Loop Tie
• Standard Wall Tie• Z-Tie Holder
• Turnbuckle
• A full 2” angle cross member assures unsurpassed frame strength & plywood support
• No special tools required; fits most other systems
• Wedgebolt/accessory slots located at 6” on center
Contractor Accessories
16-Gauge Rebar Tie Wire
16-Gauge Black Annealed Bar Ties
Wire Reel
Hand Twist Tools for Bar Ties
Multi-Purpose Stake Puller
Aluminum Chutes
Slurry Chutes
Scaffold Tie (for block or masonry applications)
22 Gauge Brick Anchor
Anchor StrapsNail Steel Stake
Anchor Bolts
Aluminum Forming System
90oAngle Clip
45oAngle Pin
“Silver Bullet”Base Pin
Round Head Pin
Flat Head Pin
Combo Filler Pin
Narrow Curved Hard Wedge
Curved Wedge
Flat Wedge
Smooth/Brick Face Waler Bracket
Scaffold Bracketfor aluminum forming system
Coil Tie
Uniply Forming System
• Window Frames• Class Inserts - Single and Double
Insulated• Straight Back Window Wells• Metal Grates & Escape Ladders• Plastic Covers for Metal Grates• Accessories • And More...
Complete Residential Window Systems
Page 68 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
RESIDENTIAL
CellofoamCavity Wall
CellofoamSub-SlabInsulationCellofoam
PerimeterInsulation
Warm up Masonry Walls & Floors
Cellofoam EPS Insulation has the compressive strength & the moisture resistance for unequalled long-term performance in demanding
below-grade applications such as sub-slab & perimeter foundations. Cellofoam EPS significantly reduces heat loss through concrete floors & walls. Cellofoam EPS is resistant to common soil
acids & deay & is easily installed with spot adhesives, fastners or wall ties. Cellofoam EPS resists moisture & increases thermal performance
in cavity wall applications while reducing basement heating requirements.
R10248 2-1/2” R10 4’x8’ Beveled & Scored / SheetR102x8 2-1/2” R10 2’x8’ Non Scored / Sheet
We have everything you need to create and maintain your concrete.
Chemicals - Patch Repair Products & Garage Floor Epoxies - Curing & Sealing
for Sidewalk & Driveway Repair
CONSTRUCTION IDEAS AT WORK
Before After
JS Salt Guard Max
The ultimate driveway, garage & sidewalk
cure & seal.
Before After
VOC
Sealed with JS Honey Brown
Call us for yourVOC
CompliantProducts!
• Curing• Concrete• Finishing• Sealing
• Specially formulated to seal stamped & decorative concrete• Non-bubbling formula - Does not create bubbles from fast evaporating solvents• Slower evaporating than traditional low-VOC products• Less prone to blushing & whitening from over-application• VOC compliant
INDOT APPROVED
Page 69 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
GEOTEX® NONWOVEN GEOTEXTILES
1008170 Propex GeoTex 801 - 15’x300’1004840 Propex GeoTex 311 - 15’x300’
1327.05 Silencure A
Bridge Deck Forming
Heavy Duty Bridge Overhang Bracket
Pres-Steel Hanger Types 1, 2 & 7
Filter Fabric
CUSTOM CUTSAVAILABLE
Anchors
Wire Bar Supports - Plain & Epoxy
Slab Bolster
Slab Bolster Upper Beam Bolster
Beam Bolster Upper Continuous High Chair
Continuous High Chair Upper
Bar Chair
Individual High Chair
Paving
Wire Baskets (without Dowels)
Expansion Basket
Contraction Basket
Tie Bar Assembly
See pages 2-5 for more Concrete Accessories
1404 Dow 3”x4’x8’ Blueboard Scored1578 Dow 2”x4’x8’ Blue Board Scored
Jobsite Supply Carries All PreCast Accessories for:
• MSE Walls• Sound Walls• Form Liners with Formwork
Jobsite Supply Carries:• Full Line of Anchors• Structural Steel• All Bar Supports & High Chairs (Continuous & Individual) - Epoxy Coated Available
Jobsite Supply Carries:
• White Wax Curing Compound• VOC Compliant Road & Bridge• Road Fabric & Plastic• Portland Cement• Aspahlt Cold & Winter Patch
Jobsite Supply Carries:
• Column Forms• Bridge Pier Forms• Bar Supports• Hangers & all of your concrete accessory needs.
A710 A7 EpconC6-18 Epcon C6A7L Epcon Acrylic 28oz Cartridge
ACC2448-R-BR 2x4 Access Tile Cast in PlaceADA-S2448RD Surf Applied 2x4 ADA Pane RDARMTIL 2x3Panel Armtle 2x3 Panels Brick RedvtARMTILE2x4 Armtle 2x4 Cast PLC ADA RedTBS-101 Adhesive for ADA Retro Panels
890 SL Dow Corning Silicon 5 Joint Sealant888 Hiway Joint Sealant
Products Specification - CategoryEnviroseal 20 909.10 Portland Cement Concrete Sealer -
9551 Material Code - 9554 Source CodeEnviroseal 40 909.10 Portland Cement Concrete Sealer -
9551 Material Code - 9554 Source Code10-60 Rapid Mortar
901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code
10-61 Rapid Mortar
901.07 Rapid SEtting Patch Material - 1097 Material Code - 9554 Source Code
Set 45 901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code
Set 45 HW 901.07 Rapid Setting Patch Material - 1097 Material Code - 9554 Source Code
INDOT APPROVED
Crackbond LR321 Ultrabond HS-200 Ultrabond 1 Ultrabond 1300 Ultrabond 2100 Ultrabond 2300 Speed Set 2 Ultrabond 365
♦ Lane Tie Repairs ♦ Sound Wall Erecting ♦ Barrier Expansion ♦ Sign Installation ♦ Pile Splicing ♦ Highway Patching
♦ Highway Reflectors ♦ Light Poles ♦ Curb/Sidewalk Repair ♦ Guard Rails ♦ Bridge Construction
FOR ALL THESE APPLICATIONS AND MORE...
INDOT APPROVED EPOXIES: • Crackbond LR321• Ultrabond HS-200• Ultrabond 1• Ultrabond 1300• Ultrabond 2100• Ultrabond 2300• Speed Set 2• Ultrabond 365
Page 70 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Concrete Sealers & Patch Materials
Joint Sealants
INDOT Approved Epoxies
UPM-BLUE UPM Winter Cold Patch- 50#UPM-Green UPM Spring-Fall Cold Patch-50#UPM-Yellow UPM Summer Cold Patch 50#
Patches
Sealing transverse contraction & expansion joints, longitudinal, center line & shoulder joints in Portland
Cement concrete.
Cast In Place Systems
• certified to meet ADA and State requirements
• integral embedment flanges are the complete anchoring system
• sustains dynamic vehicle loading, AASHTO HS20-44 wheel load test
Support in Partnership with
Jobsite Supply Carries:
• Full Line of High-Vis Class 2 & 3 DOT Gear• LED Magnetic Flares & Signs• Personal Protection Lines• Marking & Measuring Tools• Flagging & Temporary Marking Tape• OSHA Compliance Training
MASONRY SUPPLIES
163458 Dow W. Mate 9x100’ Housewrap1404 Dow 3”x4’x8’ Blueboard Scored1578 Dow 2”x4’x8’ Blue Board Scored263104 1/4”x2’x4’ Fanfold - 200SF BDLAF12 1/2” Blue Perimeter InsulationD11248U 1-1/2”x4’x8’ Blue Utility ScoredD148U 1”x4’x8’ Blue Utility Fit ScoredD228HILOAD60 2”x4’x8’ Hiload 60 DOWD248HILOAD40 2”x4’x8’ Sheets Hiload 40 INSUD248U 2”x4’x8’ Blue Utility Fit Scored
Scaffolding
• Extra Coupling Pins
• Extra Toggle Pins
• Adjusting Screw
• Extra Spring Clips for Coupler
• Swivel Caster w/ Bracket• Base Plate
• Scaffold Brace
• Rolling Tower
1001 GR7 Guard Rail 7’1004 GR5 Guard Rail 5’3004 B7H48 7’x48” Cross Brace6010 1/2” Scaffold Wing Nut23001 C-LJR 1.69 Level Jack Rigid26012 C-CP81.69 8” Plastic Caster35021 SH1 19x7 Aluminum/Plywood WalkboardBP1 Base Plate for Scaffold (1.9”)CP Coupling Pin - ScaffoldSP-P6 Walk Plank - Alum & Wood10002-01ASSY 5’x5’ Step Frame w/ Rivet/COLLR16001-01ASSY Open End Frame w/ Rivet/COLLR20060-01 C-GRP4D 1.69 Guard Rail Post25001-02 C-OR 1.69 Outrigger 30”27027-01 C-SB20H 1.69 Side Bracket 20”
• Aluminum/Plywood Walkboards
We can refurbish your
old frames!
Drainage Systems
Pos-I-Tie Veneer AnchorsStone & Masonry AnchorsConcrete Anchors
Masonry AnchorsBlueboard & Other DOW Products
DOW Cavitymate™ UltraMoisture resistant, durable & lightweight extruded polystyrene foam specifically designed for use in wet cavity wall environments. High R value of 5.6 per inch with a comprehensive strength of 25 psi. Ultra has a unique, patented carbon black technology.
DOW Styrofoam™ SM/SBStyrofoam™ Brand Scoreboard Insulation has a high density, smooth extruded skin & square edges on four sides so it fits snuggly against framing. It is scored longitudinally on 16”x24” centers.
DOW Cavitymate™
Page 71 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
*Safeway Compatible*
Insulation Tape
MASONRY SUPPLIES
Page 72 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Accessories
• 22 gauge x 10’• Filled w/
polyurethane as rolled formed
• Foam stops concrete grout from entering the slot
Mortar Mixers
7 Cu. Ft. Poly Drum
• Capacity: 1-1/2 to 2-1/2 Bags• 8HP Honda Engine• Manual Dump Action
12 Cu. Ft. Steel Drum w/ Coupler
• Capacity: 3-1/2 to 4 bags• 11HP Honda engine• Cast iron paddle arms
Hohmann & Barnard offers a diverse selection of high quality construction product for the building envelope, many of which qualify as sustainable building materials due to recycled content & help achieve LEED certification.• Masonry Joint Reinforcement• Ladder Joint Reinforcement• Seismic Reinforcement Systems• Truss Joint Reinforcement• Moisture Control Systems (Flashing)• Air & Vapor Barriers• Flashing/Weeps/Drainage• Masonry & Concrete Accessories (Bearing Pads,
Rebar Positioners, Expansion Joints/Control Joints• Anchors & Ties (Masonry & Stone)
ASP-1HD ASPIR-SOLVE - 1galENVIRO1 Envirestore 100 - 1galENVIR05 Envirestore 100 - 5gal101G-5 101G Cleaner - 5gal pail101-5 101 Masonry Restorer - 5gal pail202V-1 202V Vanastop Masonry Cleaner 1gal202V-5 202V Vanastop Masonry Cleaner 5gal pail
202-1 202 New Masonry Detergent - 1gal202-5 202 New Masonry Detergent - 5gal303WB7%-5 303WB Water Repel//Silsilox - 5gal pail333-E5-VOC250
333E Omegaseal - 10% Super Heavy
505-1 505 Coating Stripper - 1gal505-5 505 Coating Stripper - 5gal 707N-5 707N Limestone Neutralizer - PL707X-5 707X Limestone Cleaner - PL900X-1 900X Degrease & Etch - 1gal940-1 940 Iron/Manganese Remover - 1gal
Foamtastic®
22 Gauge Brick Anchor
Scaffold Tie (for block or masonry applications)
Masonry & Brick Chisels
Concrete Repair Restoration
1159 Tube Sand 60lb Poly Cover 42/P115150 Pea Gravel (56/Skid)196156 Mason Sand - 50# Bag
WM70P
WM120SHH
MASONRY SUPPLIES
Page 73 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
12” Cutquik® Saw TS410
• 64CC engine• 3.6” depth capacity• Able to be mounted on cart with
adapter kit
12” JS HD Cured* $9514” JS HD Cured* $99
JS Diamond Blades
Tilematic TS 250 X3
• 1.5 HP Baldor Motormax
• Max cutting depth 3.75”
• Max cutting length 24”
Level Eye LadderHook & Eye
• Ladder Style Adjustable Joint Reinforcement with “Lollipop” style Eyelets & Pintles.
• Eyes are double welded on to side wires to provide maximum strength & durability.
• Level Eyes make it easier to maintain 3/8” mortar joint.
• Eliminates weld points that are too thick.
Truss 2 Wire Mesh Reinforcement
• 16” O.C. Truss design positions cross rods on web of block to allow core clearance.
• Simplifies rebar installatino; centering utilizes strength of grout.
• Allows unrestricted flow of grout or loose fill insulation into CMU cells.
• Improves resistance to shrinkage cracking.
Stainless Steel Stone Anchors
Split Tail
Z Bend
L Anchor
L Anchor with Dowel
Dowels
U Anchor
Grout Grunt II
New & Improved!
• Higher Capacity• Faster Pours• Easy to Clean• Rugged
Durability• Lightweight
Scoop - Pass - Pour!
AHD 1616 16in. x 16in.AHD 1818 18in. x 18in.AHD 2424 24in. x 24in.AHD 2436 24in. x 36in.CTR 1616 16in x 16in CTR Access Door w/ Hidden FlangeCTR 1818 18in x 18in CTR Access Door w/ Hidden FlangeCTR 2424 24in x 24in CTR Access Door w/ Hidden Flange
AHD General Purpose Access Doors
The AHD is designed for a quick and easy installtion on non-rated vertical &horizontal surfaces made of drywall or any other type of material.
For All Surface Types
Ladder Wires
24010 24” Level48010 48” Level
MASONRY SUPPLIES
Page 74 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
BL147MSN Adjustable Line Stretcher•Adjustable from 4in to 12in line stretchers•Work on various size blocks from 4” - 12”•2 popular styles to chose from
BL156Snap-Over Line Twigs/Trigs 14/PK
BL348MSN 4-1/4” Tenite Line Blocks
BL210MSN Skate Wheel Joint Raker
“The Original” Hubbard JointerBL280Jointer w/ 1/2”, 5/8”, 3/4”, 7/8” Blades
BL2603/8”x1/2” Brick JointerBL262 5/8”x3/4”BL264 3/4”x7/8”
Cone Shaped Heavy Duty Vinyl Grout BagWL01310-1/2”x24” Large
Finger Tape504-0291”x30 ydGreen
Bonded Braided Nylon LineBC354 - G/BBC352 - W/BBright flourescent ultra strong bonded line. Special bonding process adds extra abrasion & alkali resistance.
Yellow Brick TongsBC380Heavy-duty quick adjustable tong (6-10 bricks)
BL526This red handle utility brush is a must for any professional. Long wearing, white tampico fibers can be used on masonry, brick, tile & stone.
Masonry BrushesJumbo Utility Brush
Polyethylene MortarPanBC49230”x30”
Mortar StandBC293Use on scaffold or ground. made from tubular steel, 30” tall or 19” laying on side.
Brick HammerBL15232oz Brick HammerBL15524oz Brick Hammer
16oz Bricklayer HammerBL255
London Pattern Brick Trowels
• Meticulously hand crafted with a special tool steel• Blades are forged and perfectly heat tempered• The blade, ferrule and tang are bound as one piece
Lufkin Wood Spacing RuleBL167
PARTNERSHIPSA Network Of Select Construction and Indus-trial Supply Distributors and Leading ManufacturersWe are proud to be members of The Evergreen Supply Network. Evergreen is a group of focused industrial and construction distributors serving the United States and Canada that provides you with:• leading products• competitive prices• cutting edge product & application knowledge• superior customer service• highly trained sales professionals
When you work with a member of the Evergreen Supply Network, you are working with a business that is committed to providing you with:• high-quality, name-brand products• exceptional customer service and value-added support• in-depth product and application knowledge
Evergreen members have invested for the long run in their people and their ability to serve you by joining the Evergreen Network.Distributors who are part of Evergreen offer you more than just tools and supplies. They offer you a relationship with a network of the finest construction and industrial distributors and manufacturers across North America.
Page 75 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
SEE FOR YOURSELF!
ONE COMPONENT FOAM SEALANTS & ADHESIVES
• Sealandfillsmallgapsandcracks• Straworgunfoamoptionsavailable• Varietyofformulationsandsizestomeet
manyapplicationneeds
• Designedtofillandinsulatelargevoidsandsurfaces
• Availableinavarietyofsizesincludingsmalldisposablekitsfrom12to605boardfootsizesandlargerefillablesystems
• Severalformulationstofitspecificapplicationneeds
LOW PRESSURE SPRAY POLYURETHANE FOAM
SEE FOR YOURSELF!
ONE COMPONENT FOAM SEALANTS & ADHESIVES
• Sealandfillsmallgapsandcracks• Straworgunfoamoptionsavailable• Varietyofformulationsandsizestomeet
manyapplicationneeds
• Designedtofillandinsulatelargevoidsandsurfaces
• Availableinavarietyofsizesincludingsmalldisposablekitsfrom12to605boardfootsizesandlargerefillablesystems
• Severalformulationstofitspecificapplicationneeds
LOW PRESSURE SPRAY POLYURETHANE FOAM
P30101 20oz Expanding Straw FoamP10141 24oz Window/Door Straw FoamP10115 24oz Pro Gun Foam
P10131 24oz Pro Gun Window/Door FormulaP10726 2 Component Spray Foam E-84 205 Board ft. Kit
One & Two Component Foam Sealants & Adhesives• Seal & fill small gaps & cracks• Straw or gun foam options available• Variety of formulations & sizes to meet many application needs
Low Pressure Spray Polyurethane Foam• Designed to fill & insulate large voids & surfaces• Available in a variety of sizes including small disposable kits from 12 to 605 boardfoot sizes & large refillable systems• Several formulations to fit specific application needs
8178Inverted Foam/Concrete Adhesive Formulated for Fiber & Foam Expansions
Adhesives
Loctite Adhesives
Available in Pint & Quart Tubes!
PL200 General Purpose AdhesivePL300 Foam BoardPL400 Subfloor Construction
ADHESIVES
Page 76 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Spray Adhesive
APC79 Spray Aerosol AdhesiveWeb Pattern
Adhesive Solutions
3M™ Scotch-Weld™ HoldFast 70 Cylinder Spray Adhesive creates quick permanent bonds on many substrates, including polystyrene, drainboard, FRP pales, insulation, foams and fabrics. Packaged in pre-pressurized canister for an easy to use, maintenance free delivery system.
Benefits and Features:• Very fast tacking• Unique wide web spray pattern with heavy body and low soak-in• Extremely versatile adhesive, bonds polystyrene without degrading surface
62-4983-8030-2Holdfast 70 Cylinder Spray
62-9880-006-3Holdfast 70 12ft. Hose Assembly
62-9880-8148-5Holdfast 70 Spray Tips
62-9880-9930-5Holdfast 70 Applicator
Page 77 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
FASTENERS
Crack Repair
Tapper + Concrete Screw System
Packaged Fasteners
AC100+ Gold
Concrete Block Brick
Power-Stud™Wedge Type Expansion Anchor
Smart Dropin™
Strap-Toggle™Hollow Wall Anchor
Zip-It® & Zip-It® Jr.Wallboard Anchor
P3500 - low velocity, semi-automatic .27 caliber tool
Head Drive Pins Threaded Rods
We Stock & Cut
Threaded Rod
The Power-Stud+ SD1 anchor is fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in cracked & uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete & concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body & expansion clip. Nut & washer are included.
Fastening Solutions
Wedge-Bolt+®
CPH09KTFlex H20 Crack Repair Kit
ETIPACKKT-Kit
Page 78 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
ADHESIVE SYSTEMS
Base Material
Anchor Diameter
Head StyleWorking
Load(Concrete)
Coating / Material Approvals
Similar Anchoring Products
Conc
rete
Ligh
twei
ght C
oncr
ete
Hollo
w C
ore
Plan
k
Gro
ut-fi
lled
Conc
rete
Mas
onry
Hollo
w C
oncr
ete
Mas
onry
Solid
Bre
ak
Hollo
w B
rick
Unre
info
rced
Mas
onry
Stee
l
Dryw
all
Stud
Fini
shed
Hex
Hea
d
Roun
d / A
corn
Nut
Flat
Hea
d (c
ount
ersu
nk)
Mus
hroo
m H
ead
Tie-
Wire
Hea
d
Fem
ale
/ Rod
Cou
pler
Flus
h M
ount
Unde
r 500
lbs.
500
lbs.
to 5
,00
lbs.
Ove
r 5,0
00 lb
s.
Zinc
Pla
ted
Carb
on S
teel
Gal
vani
zed
Stee
l
Type
303
/304
Sta
inle
ss S
teel
Type
316
Sta
inle
ss S
teel
Type
410
Sta
inle
ss S
teel
Zam
ac A
lloy
Perm
a-Se
al C
oate
d
Nylo
n / P
last
ic
Lead
1. ICC-ES2. FM3. UL4. COLA5. Miami-Dade6. NSF 61
PE1000+ 3-to-1 Cartridge - Epoxy Anchor ■ □ □ ■ □ ■ □ □ 3/8” - 1-1/4”
#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 4, 6 Hilti RE 500-SD
AC100+ Gold 10-to-1 Cartridge - Vinylester Anchor ■ □ □ ■ ■ ■ ■ 3/8” - 1-1/4”
#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 4, 6Hilti HY 200/ HY 150 MAXSimpson AT - XPRed Head Epcon A7
Pure110+ 1-to-1 Cartridge - Epoxy Anchor ■ □ □ □ □ □ □ □ 3/8” - 1-1/4”
#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 1, 6Simpson SET-XPRed Head Epcon G5
Pure50+ 1-to-1 Cartridge - Epoxy Anchor ■ □ □ ■ ■ ■ □ □ 3/8” - 1-1/4”
#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 6, 1-PendingHTE 50Simpson SET, ET or EDOTRed Head Epcon C6
T308+ 1-to-1 Cartridge - Epoxy Anchor ■ □ ■ ■ ■ □ ■ 3/8” - 7/8”
#3 - #7 Rebar ■ ■ ■ ■ ■ ■ ■ ■ 6HTE 50Simpson SET, ET or EDOTRed Head Epcon C6
AC50 Silver 10-to-1 Cartridge - Vinylester Anchor ■ □ □ ■ ■ ■ ■ 3/8” - 1”
#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ Simpson ATRed Head Epcon A7
Hammer-Capsule Glass Capsule - Hammer Type Anchor ■ □ □ □ 3/8” - 1”
#3 - #8 Rebar ■ ■ ■ ■ ■ ■ ■ ■ Simpson VGC Capsule ITW Chemset Hammer Cpsl.
Chem-Stud Glass Capsule - Spin Type Anchor ■ □ □ □ 3/8” - 1-1/4”
#3 - #10 Rebar ■ ■ ■ ■ ■ ■ ■ ■ ■ Hilti HVU Capsule ITW Maxima 7 Spin Capsule
HEAVY DUTYAtomic+ Undercut Undercut Anchor ■ ■ 5/8” - 1-1/8”
(nom 3/8” - 3/4”) ■ ■ ■ ■ ■ ■ ■ 1 Hilti HDA Undercut
Power-Bolt+ Heavy Duty Sleeve Anchor ■ ■ ■ □ 1/2” - 5/8” ■ ■ ■ ■ ■ 1 Hilti HSL-3
Power-Bolt Heavy Duty Sleeve Anchor ■ ■ □ ■ □ ■ □ 1/4” - 3/4” (CS)
1/4” - 1/2” (SS) ■ ■ ■ ■ ■ ■ ■ 2, 3 Hilti HSL
MEDIUM DUTYPower-Stud+ SD1 Expansion Anchor ■ ■ ■ 1/4” - 1-1/4” ■ ■ ■ ■ ■ ■ 1, 2, 3, 4
Hilti Kwik Bolt 3 (KB3)Simpson Strong-BoltRed Head Trubolt
Power-Stud+ SD2 Expansion Anchor ■ ■ ■ 3/8” - 3/4” ■ ■ ■ ■ ■ 1, 2, 3, 4
Hilti Kwik Bolt TZSimpson Strong-Bolt 2Red Head Trubolt+
Power-Stud+ SD4/SD6 Expansion Anchor ■ ■ ■ 1/4” - 5/8” ■ ■ ■ ■ ■ ■ 1
Hilti Kwik Bolt 3 (KB3)Simpson Strong-BoltRed Head Trubolt
Power-Stud HD5 Expansion Anchor ■ ■ ■ 1/2” - 5/8” ■ ■ ■ ■ ■ Hilti Kwik Bolt 3 (KB3) HDG
Red Head Trubolt
Power-Stud (MG, SS) Expansion Anchor ■ ■ □ 1/2” - 1” (MG)
1/4” - 1” (SS) ■ ■ ■ ■ ■ ■ ■ 2, 3Hilti Kwik Bolt 3 (KB3)Simpson Wedge-All
Lok-Bolt AS Sleeve Anchor ■ ■ □ ■ ■ ■ □ 1/4” - 3/4” (CS)
1/4” - 5/8” (SS) ■ ■ ■ ■ ■ ■ ■ ■ ■Hilti HLCSimpson Sleeve-AllRed Head Dynabolt
Wedge-Bolt+ Screw Anchor ■ ■ □ ■ □ ■ 1/4” - 3/4” (CS)
3/8” - 3/4” (MG) ■ ■ ■ ■ ■ ■ 1, 2, 4Hilti Kwik HUS / HUS-EZSimpson Titen HDRed Head Large Dia. Tapcon (LDT)
Wedge-Bolt (SS) Screw Anchor ■ ■ ■ ■ 1/4” - 1/2” ■ ■ ■ ■ ■ ■ No Similar Product
Snake+ Rod Hanger / Screw Anchor ■ ■ □ □ 1/4” - 1/2” ■ ■ ■ ■ 1, 2, 4 No Similar Product
Vertigo+ (Concrete) Rod Hanger / Screw Anchor ■ ■ 1/4” - 1/2” ■ ■ ■ ■ 1, 2
Simpson Titen HD Rod Hanger Hilti HUS-EZ I
Vertigo (Steel / Wood) Rod Hanger / Screw Anchor ■ ■ ■ ■ 1/4” - 1/2” ■ ■ ■ ■ 2, 3 ITW Sammy
Bang-It / Wood-Knocker Speciality Cast-In-Place ■ ■ 1/4” - 3/4” ■ ■ ■ ■ ■ ■ 2, 3
Hilti HCI-WF / HCI-MDSimpson Blue Banger
Smart DI+ Dropin Anchor ■ □ 1/4” - 3/4” ■ ■ ■ ■ 2, 3
Hilti HDI Drop-InRed Head RL Drop-In
Steel Dropin Dropin Anchor ■ ■ 1/4” - 3/4” ■ ■ ■ ■ ■ ■ 2, 3
Hilti HDI Drop-InRed Head RL Drop-In
Mini Dropin Dropin Anchor ■ ■ ■ □ 1/4” - 1/2” ■ ■ ■ ■ 2
Hilti HDI-P Short Drop-InRed Head RX Drop-In
Hollow- Set Dropin Dropin Anchor ■ ■ ■ ■ ■ ■ □ 1/4” - 5/8” ■ ■ ■ ■ ■ ■ 2, 3 No Similar Product
Double Bolt/Shield Anchors ■ ■ ■ ■ ■ 1/4” - 3/4” ■ ■ ■ ■
Single Bolt/Shield Anchors ■ □ □ □ 1/4” - 5/8” ■ ■ ■
LIGHT DUTYTapper+ Screw Anchor ■ ■ ■ ■ ■ ■ □ 3/16” - 5/16” ■ ■ ■ ■ ■ 1, 5
Hilti Kwik-Con IISimpson Titen / Titen HD Redhead Tapcon
Tapper (SS) Screw Anchor ■ ■ ■ ■ 3/16” - 1/4” ■ ■ ■ ■ ■ 5Hilti Kwik-Con IISimpson TitenITW Tapcon
Safe-T+Pin Pin / Nail Anchors ■ ■ ■ ■ 8mm ■ ■ 1 No Similar Product
Spike Pin / Nail Anchors ■ ■ ■ □ 3/16” - 1/2” (CS)3/16” - 3/8” (SS) ■ ■ ■ ■ ■ 2
Simpson CrimpRed Head Redi-Drive
Drive Pin / Nail Anchors ■ □ □ □ 3/16” - 1/2” ■ ■ ■ ■ ■ 3 Simpson MSD/CSD/DSD
Zamac Hammer ScrewPin / Nail Anchor ■ □ □ ■ ■ ■ □ 3/16” - 1/4” ■ ■ ■ ■ ■ No Similar Product
Zamac or Nylon Nailin Pin / Nail Anchors ■ □ □ ■ ■ ■ □ 3/16” - 1/4” ■ ■ ■ ■ ■ ■ ■Calk-In Bolt/Shield Anchors ■ □ ■ □ ■ #8-32 - 1/2” ■ ■ ■ ■ ■Toggle-Bolt Hollow Walll Anchor □ ■ ■ 1/8” - 1/2” ■ ■ ■ ■ ■ ■Strap-Toggle Hollow Walll Anchor □ ■ ■ 3/16” - 1/2” ■ ■ ■ ■ Hilti HTB Toggler Bolt
Zamac or Nylon Zip-It Drywall Anchor ■ ■ #10, 6, 8 Screw ■ ■ ■ ■ ITW EZ
Wall Dog Drywall Anchor ■ ■ ■ ■ ■ ■ ■ 3/16” ■ ■ ■ ■ No Similar Product
■: Suitable □: May Be Suitable Indicates a Code Listed Product Simpson is a registered trademark of Simpson Strong-Tie Company, Inc Hilti is a registered trademark of Hilti Corp. ITW and Redhead are registered trademarks of Illinois Tool Works, Inc
For technical support please contact a Powers Product & Code Expert at 914-235-6300 of visit our website at www.Powers.comVerify scope of approval relative to intended application. The information and data contained within this document is current as of October 1, 2013 and is subject to change after such date. Powers Fasteners, Inc. reserves the right to change the designs, materials and specifi cations of the products in this document without notice and shall have no liability with respect to such changes. Please contact Powers Fasteners for the most current and up to date information and data or refer to our website at www.powers.com
Powers USA: (800) 524-3244 or (914) 235-6300 Canada: (905) 673-7295
Anchor Selection Chart
Powers Fasteners, Inc.
Epoxy Guns & Accessories
EVERYDAY SUPPLIES
Multi-Purpose
10000 WD40 Trigger Sprayer for Bulk Product10152 WD40 11oz Aerosol Spray w/ Smart Straw287995 WD40 1 Gallon Unit
01912 EN22 Industrial 9V Battery01919 EN91 Industrial AA Battery01920 EN92 Industrial AAA Battery01921 EN93 Industrial C Battery01922 EN95 Industrial D Battery05543 Duracell Industrial 6V Battery
Batteries
• Clear molded plugs with power-indicator light in female end
• Reinforced blades help prevent accidental bending or breaking
• UL listed / CSA Certified / Meets OSHA requirements for outdoor use
• Other color combinations available!
025490052 12/3 100’ Green/Yellow025490077 12/3 100’ Pink/Green02548USA1 12/3 50’ Red/White/Blue025449USA1 12/3 100’ Red/White/Blue
07775 Coleman Cable Luma-Site™ Halogen Lighting07880 500W Replacement Halogen Bulbs07776 1000 Watt Dual Head Light w/ Tripod Stand
Outdoor Extension Cords
Flashlights & Headlights
TUF2AAPE• Flashlight LED 2AA w/
Battery Pouch
TUF2DPE• Flashlight 2D LED
w/BAT
TUF4D1E• Hardcase 4D Lantern w/
BAT
TUFHD31PE• Head Light 4LED Tufcase
515• 20:1 Thrust Ration• Built-in Static Mixer Cutter• Cartridge Retaining Bars
750-XSP• 26:1 Thrust Ration• Extra Durable Heated Treated Piston Rod• Side by Side Epoxy Applicator
250• 18:1 Thrust Ration • 1/10 Gallon Industrial Smooth Rod Caulking Gun w/ Revolving Barrel• Zinc Alloy Handle
215 Quart Rachet Caulk Gun624 Bulk Gun
Nylon Lifting Slings
EE2-802-10 2”X10’ Nylon SlingEE2-802-12 2”X12’ Nylon SlingEE2-802-14 2”X14’ Nylon SlingEE2-802-16 2”X16’ Nylon SlingEE2-802-20 2”x20’ Nylon SlingEE2-802-6 2”x6’ Nylon Sling
A-Slick-1• Caulking Tool Finishing Set-Includes 3” Tapered & 3”,4”,8” Straight Stainless “Spatula” Style Blades
SPT-3PT• Offset Spatula Finishing Tool - 3” Long & 1/2” Wide
PC-58 (Green)PC-620 (Yellow)• Plastic Tapered Nosecones
02832• 12/3 2ft. SJTW Right Angle GFCI w/ Tri-Source
07765• 500W Heavy Duty Hand-Held Halogen
02589• 12/3 SJTW Yellow Vinyl Extension Cord w/ Lighted End
02588• 12/3 SJTW Yellow Vinyl Extension Cord w/ Lighted End
05984 & 05985• 15A/125V NEMA 5-15 Yellow Vinyl Male Plug & Female Connector
Page 79 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Get to know Jobsite Supply
- Community Involvement -
Jobsite Supply proudly supports Anna’s Celebration of Life Foundation.
Helping kids with special needs receive the therapy devices they need to thrive.
For more information, visit annascelebrationoflife.org.
Page 80 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225
Customer Sales& Rental Group
317-684-7474800-874-7415
Fax: 317-684-7484www.jobsitesupply.com
Customer Account ManagersForming & Shoring
Scott HallCell: 317.281.6377
Decorative Concrete & Restoration SpecialistRyan McCreery
Cell: [email protected]
Concrete Slab SpecialistMike Kamm
Cell: [email protected]
Safety SpecialistTrevor Osborn
Cell: [email protected]
INDOT SpecialistBuck Quigley
Cell: [email protected]
Industrial Supplies & Fastening SpecialistDon Toon
Cell: [email protected]
Senior Customer Support Team MemberJerry Becher
Cell: [email protected]
Customer Support Team MembersRyan Hall
Sean [email protected]
Kevin [email protected]
Jon Quearry Cell: 317.710.8982
Tim Waddell Cell: 317.710.1049
Customer Sales ManagerPete Molloy
Cell: [email protected]
Customer ServiceReception
Courtni [email protected]
Customer EquipmentRental & Service Associate
Tony WeiskeCell: 317.514.9794
Customer ServiceMechanic
Chuck Burris Cell: 317.710.5572
Customer Purchasing ManagerBrian Myers
Cell: [email protected]
Customer Support Team LeaderMylissa McCoy
Cell: [email protected]