Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
JS1000
SYSTEM
JS1000
SYSTEMPLATING
®
Indented Hex Washer HeadSelf-Drillers. Serrated Heads14-14 x 7/8”, 5/16-18 X 1- 1-1/4 - 1-1/2” SD35/16”, 7/16” & 3/8” Across Flats Stitch Point - #2 self drill
Indented Hex Washer HeadMachine Screws - Plain &Serrated Heads1/4 - 5/16 - 3/8” - 1/2” dia. up to 3”
Indented Hex Washer HeadSerrated Self-Drillers14-20 x 5/8” to 1”3/8” & 7/16” Across Flats#2 & #3 self-drill
Indented Hex Washer Head Serrated14-10 x 3/4”, 1”, 1-1/4”, 1-1/2” Type A1/4-14 x 3/4” Type ABBoth 3/8” or 7/16” Across Flats14-8 x 1” Low Root
Pan Socket Type A - ABTapping Screws6 x 5/8”, 8 x 3/4”, & 10 x 3/4”Other Sizes Available
Pan Head QuadrexSelf-Drillers8-18 x 1/2” #2 self-drill & #310-16 x 3/4” #3 self-drillOther Sizes Available
Indented Hex Washer Head(Lag Screw) Type A(5/16) 18-9 x 1-5/8”, 2”, 2-1/2”, 3”, 4”7/16” or 1/2” Across FlatsUnhardenedExtra high head available for special applications
Carriage bolts1/4-20 x 1/2”, 5/8”, 3/4”, 1”5/16-18 x 3/4”, 1”, 1-1/2”, 2”Other Sizes Available
Indented Extra High Hex Washer Head (Lag Screw) Type A20-9 x 1-3/4”, 2”, 3-1/4” (7/16” Across Flats)Unhardened, High-Head
Flat Head Carriage Bolts1/4-20 x 1-7/8”, 2”, 2-1/4”, 2-1/2”& 5/16-18 x 3/4” & 1” low profile3/8-16 x 1”
Knurled Track Bolts1/4-20 x 3/4” Flat Head5/16-18 x 3/4” Pan Head Phillips1/4-20 x 5/8”, 3/4” Truss Head3/8” x 3/4” & 1” Pan (Flat) Head
Short Neck Carriage Bolts1/4-20 x 1/2”, 5/8”, 3/4”5/16-18 x 3/4”, 1”3/8-16 x 7/8”
Flat Head, Round Head &Shoulder Rivets1/4”, 5/16”, 3/8” Diameter
Special Low ProfileCarriage Bolts5/16-18 x 3/4”,3/8-16 x 1”
UNC Finished Hex Nuts1/4”, 5/16”, 3/8”
Hex Washer Head Machine Screws1/4” - 5/16” - 3/8” to 3” long
Flat Washers - Lock Washers1/4”, 5/16”, 3/8”, 7/16”, 1/2” (Available from Leland Industries Inc.)
Serrated Flange Locking Nuts1/4”, 5/16”, 3/8” GR5
* NOTE: USING SERRATED HEX WASHER HEAD SCREWS & SERRATED HEX FLANGE LOCKING NUTS ELIMINATES THE NEED FOR FLAT & LOCK WASHERS. FASTENER HEADS CAN BE POWDER COATED RED FOR HIGH-STRESS OR DANGEROUS AREAS OF THE DOOR.
Guaranteed to outperformother premium coatings...at a fraction of the cost!
Master Overhead GaraGe dOOr
A Complete Line of Garage Door Fasteners • Expanded bolt offering up to 3/4” dia. x 6”
POINT-OF-PURCHASE DISPLAYS available for installers.KITS – 50 Pieces/Bag, 20 Bags/Sleeve.
Demand Leland “NF” & “L” head markings that guarantee 100% North American manufactured
fasteners made with North American steel.
All product is manufactured by Leland Industries Inc. with the exception of Flat and Lock Washers.
Red powder coated fasteners are available to define high stress areas.
YOUR
GUARANTEE OF HIGHEST QUALITY
100% MANUFACTURED IN NORTH AM
ERIC
ADT1700
SYSTEM
DT1700
SYSTEMLONGLIFE
®
ENHANCEDANTI-CORROSION
PROTECTION SYSTEM THATIS APPLIED TO ALL LELAND FASTENERS
1000 HOURS SALT SPRAY LIFE
SPECIALANTI-CORROSION
PROTECTION SYSTEM FOR ACQ
MATERIALS
1700 HOURS SALT SPRAY LIFE18 CYCLES
SO2 KESTERNICH
THE ULTIMATE CORROSION PROTECTION
SYSTEM. NO RISK OF HYDROGEN
EMBRITTLEMENT
PROVIDES UP TO 3000 HOURS OF RUST-FREE
PERFORMANCE IN SALT-SPRAY TESTS
POWDER COATING
THAT LASTS THE LIFE OF THE DOOR!
HIGH LUBRICITY ANTI-CORROSION
PROTECTION SYSTEM FOR
STAINLESS STEEL
Fasteners YOUR
GUARANTEE OF HIGHEST QUALITY
100% MANUFACTURED IN NORTH AM
ERIC
A
ACCREDITED
ACCREDITATION TO ISO / IEC – 17025SCOPE: MECHANICAL CERTIFICATION NUMBER: 1053.01
THERE ARE INTERNATIONAL AGREEMENTS OF MUTUAL RECOGNITION WITH EUROPE, THE AMERICAS AND PACIFIC RIM COUNTRIES
The ISO/IEC 17025 accreditation applies to mechanical testing and does not imply certification/approval of the products described. See the lab scope on our website for the specific tests covered by the accreditation.
This accreditation is restricted to the quality assurance laboratory located at the manufacturing plant and head office in Toronto, Ontario, Canada.
TESTING LABORATORY
EQUIPMENT• ACCREDITED TESTING LAB• ASSEMBLY• BOLT MAKERS• HEADING• NUT FORMING• NUT TAPPING• POINTING• POWDER COATING• SHANK SLOTTING• THREAD ROLLING• TOOL ROOM• TRIMMING• IN-HOUSE NZF3000 SERIES COATING LINE
BC, Port Coquitlam (604) 472-1041, Fax (604) 472-1051ALBERTA, Calgary (403) 252-4414, Fax (403) 259-8876 ALBERTA, Edmonton (780) 453-2766, Fax (780) 455-8261 QUEBEC, Joliette (450) 756-1441, Fax (450) 756-1678
1-800-263-3393, North America Wide www.lelandindustries.com
HEAD OFFICE (416) 291-5308 • FAX (416) 291-0305 • 95 COMMANDER BOULEVARD, TORONTO, ON, M1S 3S9, CANADA
FOR CANADIAN THREADALL: (519) 576-3360 • TOLL FREE: 1-877-777-2612 • FAX (519) 576-3991 • 130 TURNBULL COURT, CAMBRIDGE, ON, N1T 1J2, CANADA • www.threadall.com
BRANCHES
APRIL 2019
KANSAS, Shawnee (888) 292-6166, Fax (888) 292-6228MINNESOTA, Maplewood (651) 483-9990, (800) 388-3043, Fax (651) 484-2778 OKLAHOMA, Tulsa (918) 949-4023, (844) 260-2438, Fax (918) 949-4024