JUNNI Catalogue 2010 - Copy - NEXOR pipes · 9 NEXOR Hot Water Lines PPR piping system for hot water systems PN 20 pressure rating 39 TABLE OF CONTENTS Page 2 . Page 3 ... Note: We

PRODUCT CATALOGUE

2010

DESCRIPTION PAGE

NO.

COMPANY PROFILE 3

NEXOR HDPE Pressure Mains Pipe 5

NEXOR HDPE Butt Fusion Pipes 6

NEXOR HDPE Pipes for Service Connections 9

NEXOR PP Push Fit Compression Fittings 10

NEXOR PE Socket Fusion Fittings 15

Brief Company History, NEXOR, About Us, Mission

For Potable Water System.

No need to Buttweld HDPE Pipe

For Potable Water System

For Potable Water System

The easiest way to connect PE Pipes

Ideal for internal plumbing pipes

PRODUCT

LINE

1

2

3

4

5

6 NEXOR Brass Threaded PE Socket Fusion Fittings Ideal for internal plumbing pipes 17

7 NEXOR Spigot Fittings HDPE Fittings for buttwelding 19

8 NEXOR Standard G.I. Nipple Schedule 40 (HD) Standard 38

10 NEXOR Annular Corrugated Pipes For drainage, sewage & other gravity flow applications 46

9 NEXOR Hot Water Lines PPR piping system for hot water systems

PN 20 pressure rating

39

TABLE OF CONTENTS

Page 2

Page 3

COMPANY PROFILE

BRIEF COMPANY HISTORY

Junni Industries Inc. is a corporate entity, duly registered on August 1, 2003, with the Securities and Exchange Commission under and in accordance with provisions of the Corporation Code of the Philippines with Securities and Exchange Commission (SEC) Registration No. CS200317177, with domicile address at 4th Floor NEXOR Bldg., 1677 Quezon Ave., West Triangle Q.C.

The incorporators of Junni Industries Inc. are, Engr. Franklin C. Tan, President and Chairman of the Board from 2003 to present. Engr. Johannes Burke C. Tan is the General Manager and the Board’s Secretary while Ms. Katheryn T. Vallester is the Treasurer.

Technological innovations in the field of plastic piping technology and the unavailability of the use of such among pipe manufacturer in the Philippines motivated the start-up of the company.

Observing the low level of quality among pipes produced in the Philippines and the success in the local market of expensive though superior in quality of imported pipes such as Rehau and Polymutan, the company recognizes the demand for quality pipes in the local market and it is determined to fill the void.

To date, the corporation’s financial operation from 2003 to the present has been very promising, despite the fact that the Philippine economy is experiencing difficult times. Sales and profits of the corporation have remained unabated despite the downtrend in the Philippine economy. Our success is a result of our hard work, building a reputation as a reliable provider of quality products such as HDPE pipes and fittings, and winning the customer’s confidence.

Setting and maintaining a high quality standard of plastic products can be only possible through the use of the latest and modern manufacturing equipment. Junni Industries Inc. uses extruders from the renowned German company Krauss Maffei. Our technologically superior extruders guarantee superior performance. In addition, our production lines are equipped with ultrasonic thickness measuring devices, melt filtration, and gravimetric dosing units.

Junni Industries Incorporated is affiliated with Cofta Mouldings Corporation – the pioneer and still the number one manufacturer of monoblock chairs, tables, drawers, PC twin wall roofing PVC foam sheets, etc.

In January 2006, Junni Industries Inc. introduced NEXOR brand of HDPE pipes. NEXOR pipes have superior surface finish, concentric inner and outer pipe walls, and close tolerance wall thick-ness. At Junni Industries Inc., we understand that in manufacturing pipes, the slightest dip in the thickness tolerance of the pipe defines the weakest point of the entire piping system. A pipe is as good as its weakest point or its thinnest wall section. With NEXOR pipes being stringently in-spected for quality, Junni Industries aims to break in to the market by providing high quality pipes.

ABOUT US

Pipe failure goes beyond the cost of simply replacing the pipe. In most applications, the short-sighted savings incurred in using inferior pipe materials is negated by the high cost of repair and re-installation of pipes. In internal plumbing applications for instance, expensive earth movements and or building structure adjustments have to be done in order to repair faulty pipe systems. Fail-ure of pipes in agricultural applications may suspend the delivery of plant nutrients leading to poor harvests. Undetected leakage due to pipe failure is perhaps the worst with using inferior pipe. Leakage in buried pipes imposes a high tax in terms of energy costs in pumping water.

In recognition of the fact that pipe failure goes beyond the cost of simply replacing the pipe, NEXOR brand of pipes was established to stand for quality pipes at reasonable prices.

We, the makers of NEXOR pipes, are committed to practicing the highest level of engineering standards and to providing superior customer support. Should you have product inquiries or re-quirements, feel free to contact us or you may visit our website at www.nexorpipes.com for further information.

MISSION

Junni Industries Inc. envisions becoming the authority in the manufacture, design, and installation of piping systems in the Philippines for applications including potable water, drainage, sewage, gas, and others through constant investment in piping technology, practicing the highest level of engineering standards, and providing superior customer support..

Page 4

HDPE PRESSURE MAINS—For Potable Water

• SPECIFICATION : PN 10

• PRODUCT PROPERTIES & FEATURES : ● High Flow Capacity

• ● Durable » Weather Resistance

• » Chemical Resistance

• ● Safe

• ● Easy to install

• ● Economical

• SIZES AVAILABLE : 63 mm Ø x 315 mm Ø

• STANDARD COLOR : Black with blue stripes, Black or Blue

• INSTALLATION : Push Fit Type Connection. No equipment needed

• REPLACES : Class 150 uPVC Mains

6 METER LENGTHS LONG LENGTHS

OUTSIDE

DIAMETER

(mm)

LENGTH

(m)

PN 10 (150 PSI) LENGTH

(m)

PN 10 (150 PSI)

THICKNESS

(mm)

PRICE

THICKNESS

(mm)

PRICE

63 6 3.7 774.00 60 3.7 6,238.00

90 6 5.4 1,580.00 60 5.4 1,2955.00

110 6 6.6 2,360.00 50 6.6 21,608.00

160 6 9.5 not yet

available

12 9.5 not yet

available

225 6 13.4 12 13.4

280 6 16.6 12 16.6

315 6 18.7 12 18.7

Page 5

HDPE BUTT FUSION PIPES

•SPECIFICATION :

•PRODUCT PROPERTIES & FEATURES : - High Flow Capacity

- Durable » Weather Resistance

» Chemical Resistance

- Safe, easy to install and economical

•SIZES AVAILABLE : 63mm Ø up to 1000mm Ø

•STANDARD COLOR : Black with blue stripes, Black or Blue

•INSTALLATION : Butt Fusion (equipment and electric generator required)

Page 6

1 Meter interval

NEXOR 63mm x 3.7mm PN16 PE80 " water " 08090807 ISO 4427

D-Outside (mm)

I. STRAIGHT LENGTHS

OUTSIDE

DIAMETER

(mm)

COIL

LENGTH

SDR

17 13.6 11 9

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

75 6 4.5 1,183.00 5.6 1,449.00 6.8 1,729.00 8.4 2,085.00

90 6 5.4 1,703.00 6.7 2,080.00 8.2 2,500.00 10.1 3,008.00

110 6 6.6 2,544.00 8.1 3,077.00 10.0 3,728.00 12.3 4,480.00

125 6 7.4 3,244.00 9.2 3,971.00 11.4 4,828.00 14.0 5,793.00

Note: We produce PE 80 and PE 100 HDPE pipes


OUTSIDE

DIAMETER

(mm)

COIL

LENGTH

SDR

17 13.6 11 9

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

140 6 8.3 4,075.00 10.3 4,980.00 12.7 6,027.00 15.7 7,275.00

160 6 9.5 5,330.00 11.8 6,519.00 14.6 7,913.00 17.9 9,482.00

180 6 10.7 6,753.00 13.3 8,265.00 16.4 10,002.00 20.1 11,981.00

200 6 11.9 8,344.00 14.7 10,154.00 18.2 12,334.00 22.4 14,830.00

225 6 13.4 10,570.00 16.6 12,896.00 20.5 15,627.00 25.2 18,769.00

250 6 14.8 12,976.00 18.4 15,885.00 22.7 19,234.00 27.9 23,099.00

280 6 16.6 16,299.00 20.6 19,919.00 25.4 24,106.00 31.3 29,017.00

315 6 18.7 20,654.00 23.2 25,236.00 28.6 30,534.00 35.2 36,714.00

355 6 21.1 26,263.00 26.1 32,000.00 32.2 38,746.00 39.7 46,661.00

OUTSIDE

DIAMETER

(mm)

COIL

LENGTH

(mtr)

SDR

26 21 17 13.6

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

THICKNESS

(mm)

PRICE/

PC.

400 6 15.3 32,911.00 19.1 40,679.00 23.7 49,867.00 29.4 60,923.00

450 6 17.2 41,624.00 21.5 51,513.00 26.7 63,196.00 33.1 77,160.00

500 6 19.1 51,359.00 23.9 63,625.00 29.7 78,102.00 36.8 95,312.00

560 6 21.4 64,448.00 26.7 79,618.00 33.2 97,795.00 41.2 119,517.00

630 6 24.1 81,649.00 30.0 100,648.00 37.4 123,926.00 46.3 151,113.00

710 6 27.2 103,847.00 33.9 128,157.00 42.1 157,226.00 52.2 191,997.00

800 6 30.6 131,645.00 38.1 162,313.00 47.4 199,468.00 58.8 243,693.00

900 6 34.4 166,497.00 42.9 205,598.00 53.3 252,341.00 66.2 308,639.00

1000 6 38.2 205,437.00 47.7 253,994.00 59.3 311,915.00 72.5 375,996.00

II. STRAIGHT LENGTHS

II. STRAIGHT LENGTHS (LARGE DIAMETER)

Page 7


Page 8

A good seem with a

prominent, high bead.

Under actual site conditions, the size, shape and

evenness of the welded seam can only be checked

visually. Other methods of examination are based

on samples cut from the seam and studied in a The bead is too low

laboratory. ( not enough welding

pressure ). However a seam welded by following the instructions has been found to be reliable.

The adjacent column shows some examples of welded seams.

A deep split in the bead

Should the seam be unsatisfactory, it is cut off ( not enough heat, or

and the ends rewelded together again. transition time too long ).

The bead is too narrow

and high ( too much

pressure ).

Improper alignment. Max.

permitted deviation is 10%

of the wall thickness.

Different wall thickness.

Bevelling the thicker one

is recommended.

The welded materials have

different melting temperatures/

heating times.

WELDED SEAM

HDPE PIPES FOR SERVICE CONNECTIONS

Nominal

Size

OD

(mm)

ID

(mm)

Thk

(mm)

Coil

Length (m)

Weight

(kgs.)

PRICE

1/2” 20 16.8 1.6 150 14.1 2,111.10

1/2” 20 16.8 1.6 300 28.1 4,222.10

3/4” 25 21.8 1.6 150 17.9 2,687.90

1” 32 28.2 1.9 100 18.1 2,714.30

1 1/4” 40 35.2 2.4 60 17.0 2,544.70

1 1/2” 50 44.2 2.9 60 25.5 3,827.20

2” 63 55.6 3.7 60 41.7 6,256.30

2 1/2” 75 66.0 4.5 60 59.8 9,566.40

3 90 79.2 5.4 60 85.5 13,684.30

4” 110 96.8 6.6 50 105.8 21,164.60

SDR 17 (PN 8)

Nominal

Size

OD

(mm)

ID

(mm)

Thk

(mm)

Coil

Length (m)

Weight

(kgs.)

PRICE

1/2” 20 16.8 1.6 150 14.1 2,111.10

1/2” 20 16.8 1.6 300 28.1 4,222.10

3/4” 25 21.4 1.8 150 19.9 2,978.30

1” 32 27.2 2.4 100 22.2 3,336.40

1 1/4” 40 34.0 3.0 60 20.7 3,104.90

1 1/2” 50 42.6 3.7 60 32.5 4,880.10

2” 63 53.6 4.7 60 51.5 7,727.40

2 1/2” 75 63.8 5.6 60 72.6 11,620.55

3 90 76.6 6.7 60 105.10 16,821.65

4” 110 93.8 8.1 50 128.70 25,739.10

SDR 13.6 (PN 10)

Nominal

Size

OD

(mm)

ID

(mm)

Thk

(mm)

Coil

Length (m)

Weight

(kgs.)

PRICE

1/2” 20 16.4 1.8 150 10.4 1,555.80

1/2” 20 16.4 1.8 300 15.6 2,333.70

1/2” 20 16.4 1.8 300 31.1 4,667.30

3/4” 25 20.4 2.3 150 16.4 2,453.80

3/4” 25 20.4 2.3 150 24.5 3,680.60

1” 32 26.0 3.0 100 27.0 4,053.00

1 1/4” 40 32.6 3.7 60 25.5 3,821.50

1 1/2” 50 40.8 4.6 60 39.3 5,889.00

2” 63 51.4 5.8 60 61.9 9,283.00

2 1/2” 75 61.4 6.8 60 87.2 13,957.90

SDR 11 (PN 12.5)

3” 90 73.6 8.2 60 125.40 20,057.10

4” 110 90.0 10.0 50 154.9 30,970.90

Nominal

Size

OD

(mm)

ID

(mm)

Thk

(mm)

Coil

Length (m)

Weight

(kgs.)

PRICE

1/2” 20 15.4 2.3 150 19.1 2,866.30

1/2” 20 15.4 2.3 300 38.2 5,732.70

3/4” 25 19.4 2.8 150 29.0 4,349.00

1” 32 24.8 3.6 100 32.3 4,847.80

1 1/4” 40 31.0 4.5 60 30.0 4,503.40

1 1/2” 50 38.8 5.6 60 46.4 6,958.50

2” 63 48.8 7.1 60 74.5 11,167.90

2 1/2” 75 58.2 8.4 60 104.4 16,700.30

3 90 69.8 10.1 60 151.1 24,168.50

4” 110 85.4 12.3 50 186.3 37,268.10

SDR 9 (PN 16)

Page 9

Straight Coupler

PP PUSH FIT COMPRESSION FITTINGS

Description Price

20mm x 1/2” 27.00

25mm x 3/4” 37.00

32mm x 1” 53.00

40mm x 1 1/4” 124.00

50mm x 1 1/2” 151.00

63mm x 2” 222.00

75mm x 2 1/2” 466.00

90mm x 3” 908.00

110mm x 4” 1,261.00

Description Price

20mm x 1/2” 27.00

25mm x 3/4” 41.00

32mm x 1” 62.00

40mm x 1 1/4” 97.00

50mm x 1 1/2” 181.00

63mm x 2” 312.00

75mm x 2 1/2” 528.00

90mm x 3” 1,255.00

Description Price

20mm x 20mm 50.00

25mm x 25mm 64.00

32mm x 32mm 76.00

40mm x 40mm 185.00

50mm x 50mm 239.00

63mm x 63mm 393.00

75mm x 75mm 816.00

90mm x 90mm 1,275.00

110mm x 110mm 3,932.00

NEXOR PP compression fittings are the easiest way to connect PE pipes. No equipment is necessary, just simply insert and twist to connect pipes. Twisting

action compresses clinching ring which buries itself into the pipe for a secure fit.

Page 10

Male Threaded Adaptor

Female Threaded Adaptor


Reducing Coupler

Equal Tee

Reducing Tee

Description Price

20mm x 20mm 69.00

25mm x 25mm 93.00

32mm x 32mm 126.00

40mm x 40mm 360.00

50mm x 50mm 435.00

63mm x 63mm 578.00

75mm x 75mm 1,426.00

90mm x 90mm 2,535.00

110mm x 110mm 3,411.00

Description Price

25mm x 20mm 58.00

32mm x 20mm 87.00

32mm x 25mm 87.00

40mm x 20mm 151.00

40mm x 25mm 160.00

40mm x 32mm 173.00

50mm x 20mm 192.00

50mm x 32mm 195.00

50mm x 40mm 222.00

63mm x 32mm 263.00

63mm x 40mm 301.00

63mm x 50mm 337.00

75mm x 50mm 598.00

75mm x 63mm 610.00

90mm x 63mm 1,208.00

90mm x 75mm 1,270.00

110mm x 90mm 2,138.00

50mm x 25mm 195.00

63mm x 25mm 283.00

75mm x 40mm 683.00

Description Price

25mm x 20mm 89.00

32mm x 20mm 115.00

32mm x 25mm 116.00

40mm x 25mm 287.00

40mm x 32mm 342.00

50mm x 25mm 370.00

50mm x 32mm 373.00

50mm x 40mm 373.00

63mm 32mm 635.00

63mm x 40mm 635.00

63mm x 50mm 547.00

75mm x 40mm 1,367.00

75mm x 50mm 1,367.00

75mm x 63mm 1,367.00

90mm x 63mm 1,441.00

90mm x 75mm 1,441.00

Page 11

Page 12


Female Tee

Male Tee

Equal Elbow

Description Price

20mm x 1/2” 57.00

25mm x 3/4” 61.00

32mm x 1” 99.00

40mm x 1 1/4” 200.00

50mm 1 1/2” 329.00

63mm x 2” 470.00

75mm x 2 1/2” 1,038.00

90mm x 3” 2,387.00

Description Price

20mm x 1/2” 55.00

25mm x 3/4” 61.00

32mm x 1” 99.00

40mm x 1 1/4” 238.00

50mm 1 1/2” 349.00

63mm x 2” 427.00

75mm x 2 1/2” 1,086.00

90mm x 3” 2,328.00

Description Price

20mm x 20mm 49.00

25mm x 25mm 72.00

32mm x 32mm 100.00

40mm x 40mm 233.00

50mm x 50mm 313.00

63mm x 63mm 404.00

75mm x 75mm 990.00

90mm x 90mm 1,838.00

110mm x 110mm 2,391.00

Page 13


Female Elbow

Male Elbow

End Cap

Description Price

20mm x 1/2” 36.00

25mm x 3/4” 50.00

32mm x 1” 75.00

40mm x 1 1/4” 150.00

50mm 1 1/2” 216.00

63mm x 2” 333.00

75mm x 2 1/2” 654.00

90mm x 3” 1,644.00

Description Price

20mm x 1/2” 35.00

25mm x 3/4” 48.00

32mm x 1” 63.00

40mm x 1 1/4” 147.00

50mm 1 1/2” 208.00

63mm x 2” 333.00

75mm x 2 1/2” 555.00

90mm x 3” 1,644.00

Description Price

20mm 23.00

25mm 28.00

32mm 40.00

40mm 124.00

50mm 172.00

63mm 188.00

75mm 492.00

90mm 908.00

110mm 1,446.00


Page 14

Clamp Saddle

Tapping Ferrule

Description Price

32mm x 1/2” 122.00

32mm x 3/4” 122.00

32mm x 1” 122.00

40mm x 1/2” 128.00

40mm x 3/4” 128.00

40mm x 1” 128.00

50mm x 1/2” 94.00

50mm x 3/4” 124.00

50mm x 1” 128.00

63mm x 1/2” 138.00

63mm x 3/4” 152.00

63mm x 1” 152.00

63mm x 1 1/4” 213.00

75mm x 1/2” 293.00

75mm x 3/4” 308.00

75mm x 1” 306.00

75mm x 1 1/4” 340.00

75mm x 1 1/2” 352.00

75mm x 2” 350.00

90mm x 1/2” 348.00

Description Ferrule

1 1/4” x 25mm 640.00

1 1/4” x 32mm 640.00

90mm x 3/4” 396.00

90mm x 1” 396.00

90mm x 1 1/4” 463.00

90mmx 1 1/2” 413.00

90mm x 2” 397.00

110mm x 1/2” 439.00

110mm x 3/4” 491.00

110mm 1” 491.00

110mm x 1 1/4” 594.00

110mm x 1 1/2” 541.00

110mm x 2” 624.00

160mm x 1/2” 733.00

160mm x 3/4” 915.00

160mm x 1” 915.00

160mm x 1 1/4” 979.00

160mm x 1 1/2” 985.00

160mm x 2” 1,028.00

225mm x 3/4” 2,323.00

225mm x 1” 2,323.00

225mm x 2” 2,323.00

Description Price

Page 15

SPIGOT FITTINGS

NEXOR Spigot Fittings are HDPE fittings for butt welding. Injection

moulded and fabricated types available.

Product Features:

• Made of PE 100

• Better hydraulic flow than mitered fittings

• Better pressure holding capacity than mitered fitting

• Does not rely on the skill of personnel fabricating mitered fittings

NEXOR Equal Tee (Segmented) Spigot Fittings

INSTALLATION: Butt fusion (equipment and

electric generator required)

NOTES : Difficult to install in challenging

terrain, poor weather condition

DELIVERY : Usually takes 1 to 3 weeks

Page 16

NEXOR Equal Tee (Segmented) Spigot Fittings

SPIGOT FITTINGS

The pipes used for manufacturing these fittings shall be in

accordance with ISO 4427-2, and the butt fusion machine

shall be in accordance with ISO 12176-1.

LEGEND:

OD nominal outside diameter

L tubular length of fitting

L1 nominal lengths of fitting branch to axis

α nominal angle of fitting (+ 2o)

For tees fabricated out of pipe segments, the following

derating rules for the calculation of the PN shall apply:

PN = ƒT x PNpipe

where:

ƒT = derating factor for tee having a value of 0.5

PNpipe = nominal pipe pressure

L1 L1

L1 α

OD

OD

L

Segmented Tees

90 degrees

OD L L1

90 430 215

110 670 335

125 686 343

160 720 360

200 800 400

225 826 413

250 850 425

315 916 458

355 1156 578

400 1200 600

450 1750 875

500 1800 900

560 1860 930

630 1930 965

710 2610 1305

800 2700 1350

900 2800 1400

1000 3000 1500

I. Material:

a.) Base Compound:

- Material designation : HDPE

- Minimum Required Strength (MRS): 10 MPa at 50 years and 200C

- Maximum allowable hydrostatic design stress: 8 MPa

b.) Extrusion Compound Properties:

- Melt Flow Rate (MFR): - shall range from 0.2g/10min to 1.3g/10min

- Minimum Density: 0.95 g/ml

- Minimum Tensile Strength at Break : 34 MPa

- Minimum Elongation at Break: 350%

II. Prior to acceptance and delivery, fittings and gasket shall pass the required

test as PNS specifications.

SPIGOT FITTINGS

Page 17

NEXOR Equal Tee (Moulded) Spigot Fittings

L L1

ODm

L1

ODb

L1

L2

LEGEND:

ODm = Outside diameter main

ODb = Outside diameter branch

L = Length moulded block

L1 = Length of pipe

L2 = Radius of moulded block

INSTALLATION : Butt fusion (equipment and





TEE 90°, EQUAL

MAIN L L1 L2

90 130 107.5 65

110 150 167.5 75

125 165 171.5 82.5

160 200 180 100

200 240 200 120

225 265 206.5 132.5

250 290 212.5 145

315 355 220 177.5

355 395 229 197.5

400 440 289 220

450 490 437.5 245

500 540 450 270

560 600 465 300

630 670 482.5 335

710 750 652.5 375

800 840 675 420

900 940 700 470

1000 1040 750 520

I. Material:

a.) Base Compound:











Page 18

SPIGOT FITTINGS

NEXOR Tee Reducer (Branch Type) Spigot Fittings






L

ODm

L ı

ODb

I. Material:

a.) Base Compound:









II. Prior to acceptance and delivery, fittings and gasket shall pass the

required test as PNS specifications.

LEGEND:

ODm = Outside diameter main pipe.

ODb = Outside diameter branch pipe.

L = Length of main pipe.

Lı = Length of branch pipe.

SPIGOT FITTINGS

Page 19

TEE 90°, REDUCER

Main Branch L L1 Main Branch L L1 Main Branch L L1

90 32 282 100-150 630 315 565 100-150 900 110 360 100-150

110 32 282 100-150 630 280 530 100-150 900 63 313 100-150

160 63 313 100-150 630 250 500 100-150 900 32 282 100-150

160 32 282 100-150 630 225 475 100-150 1000 500 750 100-150

225 110 360 100-150 630 160 410 100-150 1000 450 700 100-150

225 63 313 100-150 630 110 360 100-150 1000 400 650 100-150

225 32 282 100-150 630 63 313 100-150 1000 355 605 100-150

250 110 360 100-150 630 32 282 100-150 1000 315 565 100-150

250 63 313 100-150 710 355 605 100-150 1000 280 530 100-150

250 32 282 100-150 710 315 565 100-150 1000 250 500 100-150

280 110 360 100-150 710 280 530 100-150 1000 225 475 100-150

280 63 313 100-150 710 250 500 100-150 1000 160 410 100-150

280 32 282 100-150 710 225 475 100-150 1000 110 360 100-150

315 110 360 100-150 710 160 410 100-150 1000 63 313 100-150

315 63 313 100-150 710 110 360 100-150 1000 32 282 100-150

315 32 282 100-150 710 63 313 100-150

355 160 410 100-150 710 32 282 100-150

355 110 360 100-150 800 400 650 100-150

355 63 313 100-150 800 355 605 100-150

355 32 282 100-150 800 315 565 100-150

400 160 410 100-150 800 280 530 100-150

400 110 360 100-150 800 250 500 100-150

400 63 313 100-150 800 225 475 100-150

400 32 282 100-150 800 160 410 100-150

450 225 475 100-150 800 110 360 100-150

450 160 410 100-150 800 63 313 100-150

450 110 360 100-150 800 32 282 100-150

450 63 313 100-150 900 450 700 100-150

450 32 282 100-150 900 400 650 100-150

500 250 500 100-150 900 355 605 100-150

500 225 475 100-150 900 315 565 100-150

500 160 410 100-150 900 280 530 100-150

500 110 360 100-150 900 250 500 100-150

500 63 313 100-150 900 225 475 100-150

500 32 282 100-150 900 160 410 100-150

Page 20

MOULDED SPIGOT FITTINGS

NEXOR Tee Reducer (Moulded) Spigot Fittings

L LM

ODm

LB

ODb

LM

L1

LEGEND:

ODm = Outside diameter main

ODb = Outside diameter branch

L = Length moulded block

LM = Length main pipe

LB = Length of reduced pipe

L1 = Radius of moulded block






Page 21

I. Material:

a.) Base Compound:











TEE 90°, REDUCER

MAIN BRANCH L LM LB L2 MAIN BRANCH L LM LB L2

110 63 103 167.5 107.5 75 450 225 265 437.5 206.5 245

110 90 130 167.5 107.5 75 450 250 290 437.5 212.5 245

160 90 130 180 107.5 100 450 280 320 437.5 245

160 110 150 180 167.5 100 450 315 355 437.5 220 245

225 110 150 206.5 167.5 132.5 450 355 395 437.5 229 245

225 160 200 206.5 180 132.5 450 400 440 437.5 289 245

250 160 200 212.5 180 145 500 250 290 450 212.5 270

250 225 265 212.5 206.5 145 500 280 320 450 270

280 160 200 180 160 500 315 355 450 220 270

280 225 265 206.5 160 500 355 395 450 229 270

280 250 290 212.5 160 500 400 440 450 289 270

315 160 200 220 180 177.5 500 450 490 450 437.5 270

315 225 265 220 206.5 177.5 560 280 320 465 300

315 250 290 220 212.5 177.5 560 315 355 465 220 300

315 280 320 220 177.5 560 355 395 465 229 300

355 160 200 229 180 197.5 560 400 440 465 289 300

355 225 265 229 206.5 197.5 560 450 490 465 437.5 300

355 250 290 229 212.2 197.5 560 500 540 465 450 300

355 280 320 229 197.5 630 315 355 482.5 220 335

355 315 355 229 220 197.5 630 355 395 482.5 229 335

400 225 265 289 206.5 220 630 400 440 482.5 289 335

400 250 290 289 212.5 220 630 450 490 482.5 437.5 335

400 280 320 289 220 630 500 540 482.5 450 335

400 315 355 289 220 220 630 560 600 482.5 465 335

400 355 395 289 229 220

MOULDED SPIGOT FITTINGS

Page 22

SPIGOT FITTINGS

NEXOR Reducer Spigot Fittings

D1D2

L

L/3 L/3

L/3

LEGEND:

D1 Outside diameter main pipe

D2 Outside diameter reduced pipe

L Length of reducer

All units of measurements are in mm.

I. Material:

a.) Base Compound:
















Page 23

REDUCER

D1 D2 L D1 D2 L D1 D2 L

63 32 45 280 180 115 560 315 160

75 32 45 280 200 115 560 355 160

75 63 45 280 225 115 560 400 160

90 63 45 280 250 115 560 450 160

90 75 45 315 180 125 560 500 160

110 63 50 315 200 125 630 400 160

110 75 50 315 225 125 630 450 160

110 90 50 315 250 125 630 500 160

125 75 50 315 280 125 630 560 160

125 90 50 355 200 135 710 400 170

125 110 50 355 225 135 710 450 170

160 90 65 355 250 135 710 500 170

160 110 65 355 280 135 710 560 170

160 125 65 355 315 135 710 630 170

180 110 75 400 225 145 800 450 170

180 125 75 400 250 145 800 500 170

180 160 75 400 280 145 800 560 170

200 125 85 400 315 145 800 630 170

200 160 85 400 355 145 800 710 170

200 180 85 450 250 155 900 500 170

225 125 95 450 280 155 900 560 170

225 160 95 450 315 155 900 630 170

225 180 95 450 355 155 900 710 170

225 200 95 450 400 155 900 800 170

250 160 105 500 280 160 1000 560 170

250 180 105 500 315 160 1000 630 170

250 200 105 500 355 160 1000 710 170

250 225 105 500 400 160 1000 800 170

500 450 160 1000 900 170

SPIGOT FITTINGS

Page 24

STUB FLANGE—SPIGOT FITTINGS

HDPE Stub End

D

H

L

OD

I. Material:

a.) Base Compound:











LEGEND:

D Outside diameter main pipe

OD Outside diameter of stub end

L Length of stub end


INSTALLATION : Bolts and nuts.

Use of allen wrench

STUB END MATERIAL : Polyethylene

FLANGE MATERIAL : Galvanized Mild Steel

GASKET MATERIAL : Natural Rubber

SPIGOT FITTINGS

Page 25

STUB END

D OD H L

20 45 10 25

25 58 10 25

32 68 10 25

40 78 11 25

50 84 12 30

63 100 14 35

75 120 16 35

90 130 17 40

110 155 18 45

125 155 25 45

160 212 25 65

200 265 32 75

225 265 32 75

250 320 35 90

280 320 35 90

315 370 35 95

355 415 40 95

400 480 46 95

450 585 60 120

500 585 60 120

560 685 60 120

630 685 60 120

710 800 60 120

800 905 60 120

900 1005 60 120

1000 1110 60 120

Galvanized Flange

Page 26


PCD

ID

OD

d

H

INSTALLATION : Bolts and nuts.

Use of allen wrench

STUB END MATERIAL : Polyethylene

FLANGE MATERIAL : Galvanized Mild Steel

GASKET MATERIAL : Natural Rubber

LEGEND:

OD outside diameter

ID inside diameter

H height of flange

d diameter for bolts & nuts

PCD parallel distance between bolts



Page 27

GALVANIZED Bolts

Pipe Size OD ID PCD H d thread size number

20 95 31 65 14 14 M12 4

25 105 36 70 16 14 M12 4

32 115 43 85 16 14 M12 4

40 140 53 100 16 18 M16 (5/8'') 4

50 150 64 110 16 18 M16 (5/8'') 4

63 165 78 125 16 18 M16 (5/8'') 4

75 185 91 145 18 18 M16 (5/8'') 4

90 200 108 160 18 18 M16 (5/8'') 8

110 220 128 180 20 18 M16 (5/8'') 8

125 220 135 180 20 18 M16 (5/8'') 8

160 285 178 240 22 22 M20 (3/4'') 8

200 340 235 295 24 22 M20 (3/4'') 8

225 340 238 295 24 22 M20 (3/4'') 8

250 395 288 350 26 22 M20 (3/4'') 12

280 395 294 350 26 22 M20 (3/4'') 12

315 445 338 400 26 22 M20 (3/4'') 12

355 505 376 460 26 22 M20 (3/4'') 16

400 565 430 515 26 26 M24 (1'') 16

450 670 517 620 28 26 M24 (1'') 20

500 670 533 620 28 26 M24 (1'') 20

560 780 618 725 34 30 M27 (1 1/8") 20

630 780 645 725 34 30 M27 (1 1/8") 24

710 895 740 840 38 30 M27 (1 1/8") 24

800 1015 843 950 42 33 M30( 1 1/4") 24

900 1115 947 1050 46 33 M30( 1 1/4") 28

1000 1230 1043 1160 52 36 M33 (1 3/8") 28

Page 28

SPIGOT FITTINGS

HDPE End Cap

D

d

L

LEGEND:

D Outside diameter of pipe

d Depth of end cap

L Length of end cap


Used for non pressurized system.

I. Material:

a.) Base Compound:





- Melt Flow Rate (MFR): - shall range from 0.2g/10min to

1.3g/10min




II. Prior to acceptance and delivery, fittings and gasket shall pass the re-

End Cap

D L d

20 32 10

25 32 10

32 32 10

40 32 10

50 32 10

63 32 10

75 32 10

90 32 10

110 32 10

125 32 10

160 32 10

HDPE Transition Fitting

SPIGOT FITTINGS

315 mm NEXOR PIPE

S

tS

SDR

L =

L1

tS

LEGEND:

D Outside diameter of pipe

d Depth of end cap

L Length of end cap


Used for non pressurized system.

I. Material:

a.) Base Compound:


- Minimum Required Strength (MRS): 10 MPa at 50 years and 200 C









Page 29

HDPE Segmented Elbow

Page 30

SPIGOT FITTINGS

ELBOW Bends (degrees)

OD

30 90

L L1 L L1 L L1

63

75

90 182 0 182 135 182 135

110 295 0 295 139 295 139

125 297 0 297 144 297 144

160 302 0 302 152 302 152

200 327 0 327 194 327 194

225 330 0 330 201 330 201

250 334 0 334 206 334 206

280 338 0 338 223 338 223

60

Page 31

SPIGOT FITTINGS

α

L

L

O

α

L

L

60 degree 90 degree

30 degree

L

α

OD

OD

Page 32 Page 32

SPIGOT FITTINGS

HDPE Segmented Elbow

ELBOW Bends (degrees)

OD

22.5 45 90

L L1 L L1 L L1

355 448 279 448 279

400 454 314 454 314

450 711 353 711 353

500 718 393 718 393

560 726 440 726 440

630 735 495 735 495

710 1046 557 1046 557

800 1058 628 1058 628

900 1072 707 1072 707

1000 1135 785 1135 785

SPIGOT FITTINGS

Page 33

L

α

OD

α

L

L1

45 degree

OD

α

L

L1

90 degree

22.5 degree

OD

G.I. Nipple

Page 34

STANDARD G.I. NIPPLE

Product Features:

Material : Schedule 40 (HD) Standard

Thread : ISO 7

Packaging : Threads with plastic wrap, packaged in boxes

TOTAL

LENGTH

INCH mm 1/2” MIN.

QTY.

3/4” MIN.

QTY.

1” MIN.

QTY.

1-1/4” MIN.

QTY.

1-1/2” MIN.

QTY.

2” MIN.

QTY.

close 31.75 9.47 500 12.63 400 18.83 300 26.54 200 30.31 200 N/A

1 1/2 38.10 10.42 400 13.90 300 20.72 200 29.31 200 33.78 200 N/A

2 50.80 12.41 400 16.55 300 24.66 200 35.11 200 41.03 100 46.89 100

2 1/2 63.50 14.31 300 19.08 300 28.41 200 40.63 100 47.94 100 55.17 80

3 76.20 16.31 300 21.75 200 32.38 200 46.48 90 55.24 80 63.91 70

3 1/2 88.90 18.38 300 24.50 200 36.47 200 52.50 80 62.77 70 72.93 60

4 101.60 20.39 200 27.19 200 40.46 100 58.37 70 70.10 60 81.72 50

4 1/2 114.30 22.32 200 29.77 200 44.29 100 64.00 70 77.14 60 90.15 50

5 127.00 24.33 200 32.44 200 48.26 90 69.84 60 84.44 50 98.90 50

5 1/2 139.70 26.28 200 35.05 200 52.13 80 75.54 60 91.57 50 107.44 40

6 152.40 28.66 200 38.22 200 56.84 80 82.47 50 100.23 40 117.81 40

7 177.80 32.47 200 43.29 100 64.38 70 93.57 50 114.11 40 134.44 30

8 203.20 36.50 200 48.66 90 72.35 60 105.31 40 128.78 40 152.01 30

9 228.60 40.36 100 53.82 80 80.00 50 116.57 40 142.86 30 168.88 30

10 254.00 45.28 90 60.38 70 89.74 50 130.91 40 160.78 30 190.35 30

12 304.80 51.76 80 69.01 60 102.56 40 149.77 30 184.36 30 218.60 20

14 355.60 60.66 70 80.88 50 120.18 40 175.71 30 216.79 20 257.45 20

16 406.40 68.71 60 91.61 50 136.13 30 199.18 30 246.12 20 292.59 20

18 457.20 79.45 60 105.93 40 157.39 30 230.48 20 285.24 20 339.45 20

20 508.00 86.28 50 115.04 40 170.92 30 250.39 20 310.13 20 369.27 20

22 558.80 94.48 50 125.97 40 187.15 30 274.29 20 340.00 20 405.06 10

24 609.60 104.50 40 139.33 30 206.99 20 303.49 20 376.51 20 448.79 10

PRICE

PRODUCT STRAIGHT LENGTHS FOR INTERNAL PLUMBING INSTALLATION USE SOCKET FUSION FITTINGS

NOTES NEED TO USE SOCKET FUSION WELDER

LENGTH 4 METERS

SDR Standard

Dimension

Ratio

Nominal

Size

Outside Diameter

(mm)

Inside Diameter

(mm)

Thick-ness

(mm) Weight (kg) Price

13.6 Pressure

Rating

128psi

1/2" 20 16.8 1.6 0.4 -

3/4" 25 21.4 1.8 0.5 82.6

1" 32 27.2 2.4 0.9 140.5

1 1/4" 40 34.0 3 1.4 219.5

1 1/2" 50 42.6 3.7 2.1 338.8

2" 63 53.6 4.7 3.4 541.9

2 1/2" 75 63.8 5.6 4.8 768.6

3" 90 76.6 6.7 6.9 1,103.8

4" 110 93.8 8.1 10.2 -

9 Pressure

Rating

230psi

1/2" 20 15.4 2.3 0.5 80.50

3/4" 25 19.4 2.8 0.8 122.90

1" 32 24.8 3.6 1.3 202.20

1 1/4" 40 31.0 4.5 2.0 315.90

1 1/2" 50 38.8 5.6 3.1 491.70

2" 63 48.8 7.1 4.9 784.90

2 1/2" 75 58.2 8.4 6.9 1,106.40

3" 90 69.8 10.1 10.0 1,596.00

4" 110 85.4 12.3 14.9 -

Page 35

PIPES FOR INTERNAL PLUMBING

PE SOCKET FUSION FITTINGS

Page 36

NEXOR PE Socket fusion fittings are ideal for internal plumbing pipes. Socket fusion fittings are recommended for making straight length pipe connections. Socket fusion fittings and pipes are joined by simultaneously heating the external surface of the

pipe and the internal surface of the fitting.

Equal Tee

Description Price

20mm 31.00

25mm 36.00

32mm 83.00

50mm 174.00

63mm 188.00

Equal Elbow

Description Price

20mm x 20mm 25.00

25mm x 25mm 31.00

32mm x 32mm 62.00

50mm x 50mm 209.00

63mm x 63mm 228.00

Description Price

20mm x 20mm 25.00

25mm x 25mm 31.00

32mm x 32mm 42.00

50mm x 50mm 47.00

63mm x 63mm 82.00

Straight Coupler

Page 37

PE SOCKET FUSION FITTINGS

Reducing Coupler

Description Price

25mm x 20mm 31.00

32mm x 20mm 46.00

32mm x 25mm 42.00

50mm x 32mm 45.00

63mm x 32mm 69.00

63mm x 50mm 65.00

End Cap

Pipe Stiffener

Reducing Tee

Description Price

20mm 20.00

25mm 25.00

32mm 36.00

Description Price

20mm 2.00

25mm 2.00

Description Price

25mm x 20mm 65.00

32mm x 20mm 117.00

32mm x 25mm 110.00

Page 38

BRASS THREADED PE SOCKET FUSION FITTINGS

NEXOR Brass threaded PE Socket fusion fittings are ideal for internal plumbing pipes. Socket fusion fittings are recommended for making straight length pipe connections. Socket fusion fittings and pipes are joined by simultaneously heating the external surface of the pipe and

the internal surface of the fitting.



Female Tee

Description Price

20mm x 1/2” 127.00

25mm x 1/2” 143.00

25mm x 3/4” 157.00

32mm x 3/4” 204.00

32mm x 1” 215.00

Description Price

20mm x 1/2” 106.00

25mm x 1/2” 127.00

25mm x 3/4” 139.00

32mm x 3/4” 150.00

32mm x 1” 181.00

Description Price

20mm x 1/2” 121.00

25mm x 1/2” 142.00

25mm x 3/4” 180.00

32mm x 3/4” 215.00

32mm x 1” 325.00

BRASS THREADED PE SOCKET FUSION FITTINGS

Page 39

Female Elbow

Male Tee

Male Elbow

Description Price

20mm x 1/2” 166.00

25mm x 1/2” 177.00

25mm x 3/4” 192.00

32mm x 3/4” 243.00

32mm x 1” 335.00

Description Price

20mm x 1/2” 172.00

25mm x 1/2” 196.00

25mm x 3/4” 195.00

32mm x 3/4” 226.00

32mm x 1” 346.00

Description Price

20mm x 1/2” 121.00

25mm x 1/2” 136.00

25mm x 3/4” 142.00

32mm x 3/4” 187.00

32mm x 1” 197.00

Pipe (PN 20)

Page 40

HOT WATER LINES

Product Features:

• PPR Piping System for hot water systems PN 20 Pressure Rating

• For hot water up to 90 degree Celcius

• Long Service Life

• Hygenic

Elbow 90o

Elbow 45o

Description Price

20mm x 3.4mm 189.00

25mm x 4.2mm 296.00

32mm x 5.4mm 480.00

40mm x 6.7mm

50mm x 8.4mm

63mm x 10.5mm

Description Price

20mm 27.00

25mm 46.00

32mm 75.00

40mm 154.00

50mm 260.00

63mm 473.00

Description Price

20mm 40.00

25mm 62.00

32mm 96.00

40mm 181.00

50mm 298.00

63mm 479.00

Page 41

HOT WATER LINES

Equal Tee

Reducing Tee

Description Price

20mm 32.00

25mm 55.00

32mm 94.00

40mm 181.00

50mm 300.00

63mm 557.00

Description Price

25mm x 20mm 59.00

32mm 20mm 103.00

32mm 25mm 113.00

40mm x 20mm 165.00

40mm x 25mm 170.00

40mm x 32mm 190.00

50mm x 20mm 245.00

50mm x 25mm 250.00

50mm x 32mm 275.00

50mm x 40mm 299.00

63mm x 20mm 373.00

63mm x 25mm 412.00

63mm x 32mm 476.00

63mm x 40mm 498.00

63mm x 50mm 563.00

Page 42

HOT WATER LINES

Straight Coupler

Reducer

Description Price

20mm 16.00

25mm 28.00

32mm 45.00

40mm 85.00

50mm 131.00

63mm 239.00

Description Price

25mm x 20mm 30.00

32mm x 20mm 46.00

32mm x 25mm 53.00

40mm x 20mm 73.00

40mm x 25mm 91.00

40mm x 32mm 108.00

50mm x 20mm 138.00

50mm x 25mm 152.00

50mm x 32mm 170.00

50mm x 40mm 192.00

63mm x 20mm 243.00

63mm x 25mm 258.00

63mm x 32mm 280.00

63mm x 40mm 305.00

63mm x 50mm 327.00

Page 43

HOT WATER LINES

End Cap

Cross

Long Syphon

Description Price

20mm 17.00

25mm 30.00

32mm 48.00

40mm 97.00

50mm 121.00

63mm 246.00

Description Price

20mm 69.00

25mm 98.00

32mm 170.00

40mm 250.00

50mm -

63mm -

Description Price

20mm 235.00

25mm 366.00

32mm 476.00

40mm

50mm

63mm

Page 44

HOT WATER LINES

Bypass Bend

Reducing Elbow


Description Price

20mm 54.00

25mm 91.00

32mm 150.00

40mm

50mm

63mm

Description Price

25mm x 20mm 45.00

32mm x 20mm 68.00

32mm x 25mm 88.00

Description Price

20mm x 1/2” 240.00

20mm x 3/4” 292.00

25mm x 1/2” 242.00

25mm x 3/4” 300.00

32mm x 1/2” 288.00

32mm x 3/4” 308.00

32mm x 1” 704.00

40mm x 1 1/4” 1,131.00

50mm x 1 1/2” 1,470.00

63mm x 2” 2,161.00

Page 45

HOT WATER LINES

Female Threaded Tee

Female Threaded Elbow


Description Price

20mm x 1/2” 252.00

25mm x 1/2” 285.00

25mm x 3/4” 376.00

32mm x 1/2” 426.00

32mm x 3/4’ 469.00

32mm x 1” 756.00

Description Price

20mm x 1/2” 248.00

25mm x 1/2” 253.00

25mm x 3/4” 319.00

32mm x 1/2” 376.00

32mm x 3/4” 391.00

32mm x 1” 660.00

Description Price

20mm x 1/2” 301.00

20mm x 3/4” 380.00

25mm x 1/2” 307.00

25mm x 3/4” 386.00

32mm x 1/2” 368.00

32mm x 3/4” 449.00

32mm x 1” 902.00

40mm x 1 1/4” 1,285.00

50mm x 1 1/2” 1,941.00

63mm x 2” 2,816.00

Page 46

HOT WATER LINES

Male Threaded Tee

Male Threaded Elbow

Low Footed Clamp

Welding Machine Pipe Cutter/Scissors

Description Price

20mm x 1/2” 319.00

25mm x 1/2” 334.00

25mm x 3/4” 414.00

32mm x 1/2” 491.00

32mm x 3/4’ 499.00

32mm x 1” 938.00

Description Price

20mm x 1/2” 312.00

25mm x 1/2” 336.00

25mm x 3/4” 407.00

32mm x 1/2” 439.00

32mm x 3/4” 451.00

32mm x 1” 931.00

Description Price

20mm 25.00

25mm 30.00

32mm 53.00

40mm 65.00

50mm 82.00

63mm 107.00

Description Price

20mm to 40mm 2,468.00

20mm to 63mm 7,473.00

50mm to 125mm 20,288.00

Description Price

20mm to 63mm 11,100.00

75mm to 110mm 40,600.00

Page 47

ANNULAR CORRUGATED PIPES

• ADVANTAGES

Ecpnomical, easy to use, flexible, impact resistant, corrosion free, UV resistant, high load capacity

OPTIONS

•LOAD BEARING CAPACITY

1. Single WALL— Economical, ideal for foot traffic or light loads. (Golf courses, gardens, etc.)

2. Double Wall—High load bearing capacity, ideal for roads and other demanding applications

•PERFORATION

1. Non-perforated pipes

2. Perforated pipes—for subsurface water collection, drainage, etc.

•JOINTS/CONNECTIONS

1. Non-water tight—use of split couplers, economical

2. Water tight—bell ends with rubber rings, or couplers with rubber rings

FOR DRAINAGE, SEWAGE, AND OTHER GRAVITY FLOW APPLICATIONS

I. COILED ANNULAR CORRUGATED PIPES (LONG LENGTHS)

Size

SINGLE WALL

Non-Perforated Perforated

110 OD 30.0 3,300.00 3,712.50

160 OD 30.0 5,100.00 5,737.50

Length (m)

Page 48

ANNULAR CORRUGATED PIPES

II. ANNULAR CORRUGATED PIPES WITH SPLIT COUPLER ENDS (NON-WATER TIGHT)

III. ANNULAR CORRUGATED PIPES WITH BELL ENDS (W/ RUBBER RING—WATER TIGHT)

SINGLE WALL

Size Length (m) Non-Perforated Perforated Non-Perforated Perforated

110 OD 5.8 N/A N/A 960.00 1,080.00

160 OD 5.8 N/A N/A 1,620.00 1,822.50

250 ID 5.8 3,480.00 3,915.00 5,160.00 5,805.00

300 ID 5.8 3,600.00 4,050.00 5,400.00 6,075.00

400 ID 5.8 4,800.00 5,400.00 7,200.00 8,100.00

500 ID 5.8 7,200.00 8,100.00 10,800.00 12,150.00

600 ID 5.8 10,800.00 12,150.00 16,200.00 18,225.00

800 ID 5.8 20,040.00 22,545.00 30,000.00 33,750.00

DOUBLE WALL

DOUBLE WALL

Size Length (m) Non-Perforated Perforated

110 OD 5.8 1,080.00 1,200.00

160 OD 5.8 1,822.50 2,025.00

250 ID 5.8 5,805.00 6,450.00

300 ID 5.8 6,075.00 6,750.00

400 ID 5.8 8,100.00 9,000.00

500 ID 5.8 12,150.00 13,500.00

600 ID 5.8 20,250.00 22,275.00

800 ID 5.8 37,500.00 41,250.00

NOTES:

1. Split coupler end is for not so water tight applications such as

irrigation, rain water collection, perforated systems, etc.

Phone: (02) 927-5441 • 386-5086 • 410-4288 TeleFax: (02) 415-0143

E-mail: [email protected] Website: www.nexorpipes.com

Plant Address: Sitio Rizza, Brgy. Pinugay, Antipolo City

Office Address:

4th Floor NEXOR Bldg., 1677 Quezon Ave., West Triangle, Quezon City

Documents

JUNNI Catalogue 2010 - Copy - NEXOR pipes · 9 NEXOR Hot Water Lines PPR piping system for hot water systems PN 20 pressure rating 39 TABLE OF CONTENTS Page 2 . Page 3 ... Note: We