Jason E. Wyatt

2120 Old Sterlington rd. Sterlington, La. 71280 Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com

ObjectiveTo obtain a leadership position utilizing my vast technical experience with a company that offers growth potential and challenge in exchange for proven performance and job dedication.

Profile Safety focused, quality-conscious and team oriented 4 years Offshore electronics and electrical experience on a DP2 class deep water rig from shipyard build to deep water

working vessel 18+ years’ experience in a progressive manufacturing environment with extensive knowledge of manufacturing processes,

machinery, and equipment from plant start-up to mass production Demonstrated abilities in installation, maintenance, repair, troubleshooting, and preventive maintenance of equipment and

machinery including hydraulics, pneumatics, electrical, electronics, motor controls and safety systems Well-developed verbal and technical writing skills Strong ability to work independently with minimal assistance with a self-disciplined attitude and solid work ethic and excellent

attendance record 9+ years’ experience with multi-axis robots

Areas of Expertise PLC:

Allen Bradly SLC/500, Compact Logix, RSLogix 5000SIEMENS: S7GE: 90-70 , 90-30 remote IO

Hydraulic /Pneumatic Components and Controls

Electrical power production and distribution (4160 Volt generator down to intrinsically safe controls)

RADAR principles and Controls

Robotic Electrical / Mechanical Troubleshooting

Industrial Networking Systems (Ethernet/IP, Profibus, DeviceNet, ModBus, ControlNet, etc)

Amphion Drilling Controls Dynamic Positioning Controls PM and

troubleshooting Vessel power management systems HSE Management Systems and

continuous improvement Licensed HVAC Technician Communication Systems (CCTV, LAN etc)

Basic Welding and Soldering Basic Machine Shop Skills CPR / Emergency Response HMI Software Microsoft Office Suite Proficient Proficient at reading electrical, mechanical,

pneumatic and hydraulic blueprints and schematics

Experienced in various types of maintenance management systems (SAP, PeopleSoft, CMMS, etc.)

Technical procedure writing

Professional Experience

WAYNE TRAIL (LINCOLN ELEC CO) FORT LORAMIE, OH APR. 2015 – OCT. 2015

Electrical Controls Engineer Developed and verified transfer systems to interface with customer equipment. Responsible for the Program, Design, Debug, Install and Start up of PLCs, HMIs, Motion Control Servo Drives and all

Integrated Systems. Worked with the customer on site to maximize the efficiency of equipment to meet production needs. Provide assistance to the Sales, Product Development, and Service departments to resolve customer concerns as well as to

answer technical questions when assisting the customer and maintenance staff in troubleshooting issues with their equipment.

Assisted in the development of equipment modifications and improvements to better meet costumer needs.

ENSCO INTERNATIONAL GULF OF MEXICO 2011 - 2015

Electronics Technician Responsible for the effective preventive maintenance, troubleshooting and repair of all Rig Automation, Controls and

Instrumentation Systems Main Systems Experience:

Power Generation and Distribution Controls (4160 Volt generator down to intrinsically safe controls) Power management, Vessel management, Dynamic Positioning Systems Dynamic Positioning Reference Sensors Fire & Gas Systems Drilling Control Systems Automation & PLC’s: Trained and Experienced with PLC Controls

Jason E. Wyatt – Page 2 Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com

Drilling and Thruster VFD’s BOP Controls Electrical controls for proportional hydraulics, Cranes, Pipe Handling, etc… PAGA Systems Other Marine & Navigation Equipment, Level Gauging, UPS’s, etc…

NISSAN MOTOR CORPORATION MADISON, MS 2002- 2011

Automation Maintenance Technician Worked as experienced and skilled technician with a broad knowledge in the repair, maintenance and preventive

maintenance of all equipment and machinery in the automotive manufacturing areas. Assisted contractors for the initial plant start up and launch of the facility and continued with the training of new technicians to

the department. Subject Matter Expert for the paint maintenance department to develop and optimize their PM tasks and scheduled

frequencies.

J.E. MERRIT CONSTRUCTION - COLUMBUS, MSKerr McGee – Hamilton, MS Dow Chemical – Kenner, LA

2001-2002

A-Class JourneymanResponsibilities include cable tray, conduit, flex; variable sizes of each, including plaster bond and aluminum. Terminations of variable speed drives, PLC’s, switch gear, etc. Heat tracing and various other industrial electrical duties. High voltage work to include termination and stress cones of 15 to 75 KVA transformers.

WEYERHAEUSER (CMF) – COLUMBUS, MS 1999-2001

TechnicianResponsibilities included; operation, repair, maintenance, troubleshooting and preventive maintenance of all plant machinery and equipment. Excelled in Mastry program in AC/DC, flow controls, fluid measurement devices, basic bearings, basic hydraulic systems, air compressor systems and pneumatic controls. In charge of all environmental operations within my team.

HUNTER DOUGLAS – SHANNON, MS 1995-1999

Maintenance Technician Responsibilities consisted of repair, maintenance, troubleshooting, and preventive maintenance on plant machinery and equipment. Maintained and calibrated all plant measuring devices for ISO9000. Also, was responsible for all grinding operations of slitter knives for slat line production and building maintenance. This position required extensive knowledge of shop equipment, hydraulics, pneumatics, commercial and industrial wiring, AC and DC electricity, single- and three-phase wiring, and light welding/soldering. Also was responsible for setting dies for metal stamping operations.

MS ARMY NATIONAL GUARD - TUPELO, MS 1995-1997

Aviation Electronics TechniciansWas responsible for troubleshooting and repairing all electrical and electronics malfunctions on the OH-58D helicopter.*Assisted the 1/185th Aviation group in becoming the first combat certified OH-58D helicopter unit in the U.S. National Guard.

U.S. AIR FORCE – SEYMORE JOHNSON AFB, NC 1991-1995

F-15-E Attack Controls System Specialist 0 A5 Level (AFC-45251A)Was responsible for troubleshooting and repairing all integrated avionics systems for the F-15E aircraft Graduated in top 10% of class at Lowery Air Force Base in Colorado Served as a member of the 335th Fighter Squadron that was recognized as “Top Fighter Squadron of the Year” for 2

consecutive years. Received an Accommodation Medal for Outstanding Service during Desert Storm Yearly training in Chemical War Fare and Response

Jason E. Wyatt – Page 3 Mobile: (601) 668-0720 E-mail: jasonwyatt1971@gmail.com

Education & Professional CertificationsAssociate’s Degree Electronics Curriculum & Training 1995Community College of the US Air Force

Basic Electricity 1999East Mississippi Community College

Basic Heat Tracing 1999Weyerhaeuser

Certified Industrial Electrician 2002National Center for Construction Education and Research

TRP502, PPH607, Aquabell, Accustat, GN4002, GNM100 Power Supplies, BS Speed Card and Safety 2003Sames

Allen Bradly PLC (Maintenance and Troubleshooting) 2010Intellect Controls Group

SCR Maintenance – Ross Hill Intermediate (SCR Controls) 2012NOV

Barracuda Rugged Computer Technical Training 2012AZONDIX

PLC for RIG Systems – Applications of Siemens 2012NOV

Basic Rigging and Fall Protection 2013SMS Training Academy

Top Drive Systems – AC Top Drive Electrical Systems 2013Nance HVACR Technical School

AC Drive Fundamentals & Maintenance 2013NOV

Amphion Maintenance for Rig Electrician and ET 2013NOV

HVACR 2014Nance HVACR Technical School

Hazardous Area Electrical Training 2014IADC