k. stand - knoll.comPLKS0319) 2.pdf · 509 Cherry 512 Medium Walnut 513 Medium Teak 514 Espresso 637 Natural 644 Light Walnut 645 Dove Grey ... 90° Corner Base Adjustable-width base

PLKS0319 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains

50% recycled content and 15% post consumer waste.

Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041

knoll.com

Price ListMarch 2019

k. stand

Table of Contents

Introduction Knoll and Sustainable Design 2GREENGUARD Certified� 3Finish Options 4k.™ stand Height Adjustable Tables 6

Bases Standard Electric 7Extended Electric 8

Tops Antenna Workspaces Worksurfaces 9Reff Profiles Worksurfaces 11Dividends Horizon Worksurfaces 13Postform Worksurfaces 14AutoStrada Worksurfaces 15

Accessories Accessories 16

Alpha-Numeric Index 18

Selling Policy 19

General Ordering Information 21

k.™ stand

PLKS07191

Copyright � 2019 Knoll, Inc.All rights reserved.All prices effective 03/15/2019.

Knoll and Sustainable Design

Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.

Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level�certification from Scientific Certification Systems (SCS).

In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.

Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement

solutions to some of the world’s most pressing challenges, including environmental change.

• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.

Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw

materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.

Setting Industry Standards• Knoll partners with MTS (The Institute for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable

Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.

• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level� sustainabilitystandards for the contract furniture industry.

• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.

• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.

• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.

For more information about Knoll and sustainable design, visit knoll.com/environment.

2

GREENGUARD Certified�

A natural extension of the Knoll commitment toprotect the biosphere, conserve natural resourcesand reduce waste, k. stand Height-AdjustableTables are environmentally responsible inmanufacturing process and materials.

k.™ stand Height-Adjustable Tables areGREENGUARD certified. VisitGREENGUARD.org for more information and tofind printable certificates for Knoll products thatcan be used for verification and LEEDsubmission. GREENGUARD provides the onlyguide to certified low-emitting interior productsand building materials. Its goal is to help buildingowners and managers, architects, interiordesigners and product specifiers build andfurnish healthier offices, hospitals, schools andhomes by providing a register of tested andcertified low-emitting products and materials.

The GREENGUARD Certification Program(formerly known as GREENGUARD Indoor AirQuality Certification) gives assurance thatproducts designed for use in indoor spaces meetstrict chemical emissions limits, which contributeto the creation of healthier interiors. AchievingGREENGUARD Certification gives credence tomanufacturers’ sustainability claims, backingthem with empirical scientific data from anunbiased, third-party organization.

GREENGUARD Certification emissions limitswere first used as purchasing specifications forthe US EPA and the State of Washington forfurniture and commercial building products.GREENGUARD Certification criteria have beenthe basis for the LEED credit for low-emittingfurniture since 2002. Office furniture productsthat are GREENGUARD Certified are alsocompliant with the BIFMA X7.1 standard andBIFMA e3 credit 7.6.1.

The GREENGUARD Gold Certificationrequirements comply with the State of California’sDepartment of Public Health Services StandardPractice for Specification Section 01350(California Section 01350) for testing chemicalemissions from building products used in schoolsand other environments. As such,GREENGUARD Gold Certified products can beused to earn valuable credits in the CHPS BestPractices Manual for K-12 schools, the US GreenBuilding Council’s LEED� Green BuildingRating Systems, the Green Guide for Healthcare,the NAHB Green Building Guidelines, GreenGlobes, Regreen and many other building codes,standards and specifications.

GREENGUARD Gold Certification standardincludes health based criteria for additionalchemicals and also requires lower total VOCemissions levels to ensure that products areacceptable for use in environments such asschools and healthcare facilities. In addition tolimiting emissions of more than 360 VOCs andtotal chemical emissions, office Furnitureproducts that are GREENGUARD Gold Certifiedare also compliant with the BIFMA X7.1 standardand BIFMA e3 credits 7.6.1, 7.6.2, and 7.6.3.

k. stand environmentally responsiblemanufacturing processes and materials include:

FSC-CertifiedWood components are standard FSC-certifiedwith North American hardwood veneers.

Recovered Particleboardk. stand tops have FSC certified, 90% recoveredparticleboard cores.

VOC-Free FinishesWater-based wood stains and UV-curedpolyurethane wood top coats are virtuallyVOC-free.

VOC-Free AdhesivesWater-based adhesives used to adhere laminateand veneer to substrate are 99% VOC-free.

k.™ stand

3

Finish Options

k.� stand Paint Finish

B BlackW WhiteG Grey

Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.

Code V1 TECHWOOD

638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey

Code V2 PREMIUM TECHWOOD

647 White Pine640 Ebony642 Grigio

V2 NATURAL VENEER020 Natural Oak038 Rustic Walnut *017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch

Code V3 PREMIUM VENEER

039 Pippy Oak *044 Figured Sycamore

Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore

D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore

Edge Options for VeneersWOOD Complementary WoodSYN Complementary SyntheticWPLY Wood Ply Edge *SPLY Synthetic Ply Edge *

* Ply Edge available on Birch (037) worksurfaces.

*Note:-Synthetic Edge option is available on worksurfaces, only.-Finishes with * are available on worksurfaces only.For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com

k.™ stand

4

Finish Options

Laminate Finishes Impact Resistant Laminate

Core LaminateSurface / Edge111 Jet Black**114 Folkstone Grey**115 Medium Grey**117 Soft Grey**118 Bright White**119 Pumice**121 Micro Grey *122 Brushed Sand *123 Brushed Grey *128 Fog**129 Micro Sand **121, 122, 123, 129 Not available withmatching edge option, and only available onworksurfaces.**Melamine worksurface finish, excludingAutoStrada, and Currents.

Note: All core Laminate worksurfaces areavailable with matching and non matchingedges. ie; A worksurface in 118, can have 139edge finish.

Wood Grain LaminatesSurface / Edge124 Medium Chery**125 Natural Maple**126 Natural Cherry**127 Walnut**139 Light Ash**140 Warm Ash**141 Whitened Ash**142 Grey Ash**143 Classic Oak**144 Graphite Pear**145 Zebra147 Silverwood**148 Smokewood**149 Barnwood**

Additional Edge Options forLaminate worksurfaces (only):WPLY Ply Edge - Wood (V1

Pricing)SPLY Ply Edge - Synthetic (L Pricing)

Core & Wood Grain LaminatesSurface / Edge911 Jet Black914 Folkstone Grey917 Soft Grey918 Bright White919 Pumice924 Medium Cherry925 Natural Maple926 Natural Cherry927 Walnut928 FogNote: The Rules of Wood Grain Laminates,applies to the Impact Resistant Laminates.25% Upcharge applies to the laminate pricingfor the Impact Resistant Laminates.

Note: For Tone Profiles, AutoStrada and Antenna / Telescope you can chose from V1, V2 and V3.For Dividends Horizon you can chose from V1 only.Please refer to individual price lists for detailed information on finish options.

k.™ stand

5

k.™ stand Height Adjustable TablesBase Types and Height Ranges

k.™ stand is available in Electric or Extended Electric base styles only. k.™ stand bases are adjusted with button controls mounted along the front edge of thetop. There are two switch options; a Standard Switch and Digital Switch. The Standard Switch features Up and Down buttons only. The Digital Switch includesUp and Down buttons a digital read out, and a programmable upper and lower limit.

Power Requirements Per k.™ stand Table: 120-240V at 50-60 Hz, 3.2A at 120V running drawStart Up Draw: ≤ 4ARunning Draw: ≤ 3.2AStandby Draw: <0.2W

Base Type k.� stand Standard Electric k.� stand Extended Electric

Height Range 27.6 - 46.1� 24.4 - 50�

Adjustment 1-2� per second 1-2� per secondLoad Capacity 265 lbs 265 lbs

*Height ranges shown do not include top thickness

Published heights are measured to the underside of the worksurface. When planning with storage or other object under the desk, account for 21/2� of base structure.Do not specify items that interfere with the travel of the table.

Casters raise the overall height of the table 11/2�.

k.™ stand

6

Standard ElectricAdjustable Width Base

description type w d pattern no. List Price

24� Deep C-Leg Bases Adjustable-width base for use with tops42 - 84�W

41 - 591/2�� 213/4� KHATB2CEA24G( )( ) $1,993.


41 - 591/2� 273/4� KHATB2CEA30G( )( ) 1,993.

30� Deep T-Leg Base Adjustable-width base for use with tops42 - 84�W

41 - 591/2� 273/4� KHATB2TEA30G( )( ) 1,993.

90° Corner Base Adjustable-width base for use withrectangular worksurfaces withperpendicular returns. Supports47� - 78� per side.

Side A: 461/2� - 65�Side B: 461/4� - 641/2�

213/4� KHATB2KEA24G( )( ) 3,030.

120° Corner Base For use with 48�, 54� and 60�W120° Tops

Side A: 451/4� - 631/2�Side B: 431/4� - 613/4�

213/4� KHATB2VEA24G( )( ) 3,030.

Order Code

C-Leg Bases

Example: KHATBCEA24GS, W

KHATB2 k.™ stand baseC C-LegE ElectricA Adjustable Width24 DepthG GlidesS Standard SwitchW White Finish

Specification Information

1. Switch Style:‘‘D’’ specifies the Digital Switch,which includes digital displayand two programmable heightsettings. Add $50 list for theDigital Switch.‘‘T’’ specifies the red ToggleSwitch. Add $35 list for theToggle Switch.

2. Base Finish:Available in fully painted Black,White or Grey

Application Notes

Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.

Base comes with worksurfacemounting hardware.

Maximum of 15� worksurfaceoverhang on one or both sidespermitted.

Corner base max per side dimensionis measured along back edge of topand includes depth of attached top.

Notes

When planning with objects, likestorage under the table, a DigitalSwitch must be specified and thelower limit must be set to preventcollisions.

Casters cannot be used onrectangular 24�D C-Leg bases.Casters cannot be used on any tablewith privacy screens or modesties.

A stiffener is recommended on allworksurfaces.A stiffener is required onrectangular worksurfaces 72�(nominal)or wider on all returns on90° Corner Bases.

k.™ stand

7

Extended ElectricAdjustable Width Base

description type w d pattern no. list


41 - 591/2� 213/4� KHATB2CEXA24G( )( ) $2,278.


41 - 591/2� 273/4� KHATB2CEXA30G( )( ) 2,278.

30� Deep T-Leg Base Adjustable-width base for use with tops42 - 84�W

41 - 591/2� 273/4� KHATB2TEXA30G( )( ) 2,278.

90° Corner Base Adjustable-width base for use withrectangular worksurfaces withperpendicular returns. Supports47� - 78� per side

Side A: 461/2� - 65�Side B: 461/4� - 641/2�

213/4� KHATB2KEXA24G( )( ) 4,100.

120° Corner Base For use with 48�, 54� and 60�W120° Top

Side A: 451/4� - 631/2�Side B: 431/4� - 613/4�

213/4� KHATB2VEXA24G( )( ) 4,100.

Order Code

C-Leg Bases

Example: KHATBCEA24GS, W

KHATB2 k.™ stand baseC C-LegE ElectricA Adjustable Width24 DepthG GlidesS Standard SwitchW White Finish


1. Switch Style:‘‘D’’ specifies the Digital Switch,which includes digital displayand two programmable heightsettings. Add $50 list for theDigital Switch.‘‘T’’ specifies the red ToggleSwitch. Add $35 list for theToggle Switch.

2. Base Finish:Available in fully painted Black,White or Grey

Application Notes

Bases are designed for use withcorresponding worksurfaces tocreate freestanding tables.Worksurfaces must be specifiedseparately.

Base comes with worksurfacemounting hardware.Maximum of 15� worksurfaceoverhang on one or both sidespermitted.

Corner base per side dimension ismeasured along back edge of topand includes depth of attached top.

Notes

When planning with objects, likestorage under the table, a DigitalSwitch must be specified and thelower limit must be set to preventcollisions.

Casters cannot be used onrectangular 24�D C-Leg Bases.Casters cannot be used on any tablewith privacy screens or modesties.

A stiffener is recommended on allworksurfaces.A stiffener is required onrectangular worksurfaces 72�(nominal) or wider and all returns on90° Corner Bases.

k.™ stand

8

Antenna Workspaces WorksurfacesTops for C-Leg and T-Leg Bases24�, 30� and 36� Deep Rectangular

description type w* w d h pattern no. laminate (L) Mixed(M) V1(V) V2(V) V3(V)

Antenna C-Leg Tops, 24� Deep For 24�D C-Leg Base 48� 45� 24� 11/4� KHATTYR4524( ) $336. $579. $579. $666. $902.For 24�D C-Leg Base 54� 51� 24� 11/4� KHATTYR5124( ) 364. 618. 618. 711. 961.For 24�D C-Leg Base 60� 57� 24� 11/4� KHATTYR5724( ) 392. 657. 657. 758. 1,024.For 24�D C-Leg Base 66� 63� 24� 11/4� KHATTYR6324( ) 424. 685. 685. 787. 1,063.For 24�D C-Leg Base 72� 69� 24� 11/4� KHATTYR6924( ) 441. 710. 710. 820. 1,104.For 24�D C-Leg Base 78� 75� 24� 11/4� KHATTYR7524( ) 476. 744. 744. 857. 1,156.

Antenna C-Leg and T-Leg Tops,30� Deep

For 30�D C-Leg & T-Leg Bases 48� 45� 30� 11/4� KHATTYR4530( ) 392. 652. 652. 751. 1,011.For 30�D C-Leg & T-Leg Bases 54� 51� 30� 11/4� KHATTYR5130( ) 445. 692. 692. 794. 1,072.For 30�D C-Leg & T-Leg Bases 60� 57� 30� 11/4� KHATTYR5730( ) 490. 730. 730. 838. 1,134.For 30�D C-Leg & T-Leg Bases 66� 63� 30� 11/4� KHATTYR6330( ) 547. 744. 744. 857. 1,156.For 30�D C-Leg & T-Leg Bases 72� 69� 30� 11/4� KHATTYR6930( ) 566. 770. 770. 885. 1,196.For 30�D C-Leg & T-Leg Bases 78� 75� 30� 11/4� KHATTYR7530( ) 606. 802. 802. 921. 1,247.

Antenna T-Leg Tops, 36� Deep For 30�D T-Leg Base 48� 45� 36� 11/4� KHATTYR4536( ) 430. 704. 704. 811. 1,093.For 30�D T-Leg Base 54� 51� 36� 11/4� KHATTYR5136( ) 488. 744. 744. 857. 1,156.For 30�D T-Leg Base 60� 57� 36� 11/4� KHATTYR5736( ) 540. 783. 783. 901. 1,215.For 30�D T-Leg Base 66� 63� 36� 11/4� KHATTYR6336( ) 601. 823. 823. 944. 1,274.For 30�D T-Leg Base 72� 69� 36� 11/4� KHATTYR6936( ) 622. 861. 861. 990. 1,337.For 30�D T-Leg Base 78� 75� 36� 11/4� KHATTYR7536( ) 664. 901. 901. 1,036. 1,397.

Order Code

Antenna Tops

Example: KHATTYR5130L, 118,118

KHATT k.™ stand topY Antenna StyleR Rectangular Top51 Width30 DepthL Laminate118 Bright White Laminate118 Bright White Edge


Antenna Tops

To order, specify:1. Pattern number2. Top Finish3. Edge Finish

(laminate and mixed tops only)

Application Notes

Antenna Tops

Worksurfaces are pre-drilled withpilot for use with wood screws.

Actual worksurfaces are undersizedby 11/2� on each side edge.

A stiffener is recommended on allworksurfaces. A stiffener is requiredon rectangular worksurfaces 72�(nominal) or wider and on all returnson 90° Corner Bases.

Options

Antenna Tops

Top Finish Options:Add an (L) for laminate,(V) for veneer suffix or(M) for mixed (laminate with woodedge) suffixto pattern number.

k.™ stand

9

Antenna Workspaces WorksurfacesTops for 90 Degree and 120 Degree Bases24� and 30� Deep

description type w* w d h pattern no. laminate (L) Mixed(M) V1(V) V2(V) V3(V)

Antenna Top for Corner Bases,24� Deep

Primary top for 90° Corner Base.To be used with perpendicular return.

47� 47� 24� 11/4� KHATTYR4724( ) $336. $579. $579. $666. $902.

Antenna Top for Corner Bases30� Deep

Primary top for 90° Corner Base.To be used with perpendicular return.

47� 47� 30� 11/4� KHATTYR4730( ) 392. 652. 652. 751. 1,011.

Antenna 120° Top24� Deep

For use with 24�D 120° Bases 48� 47� 24� 11/4� KHATTYV4724( ) 861. 1,899. 1,899. 2,184. 2,839.For use with 24�D 120° Bases 54� 53� 24� 11/4� KHATTYV5324( ) 918. 2,007. 2,007. 2,310. 3,001.For use with 24�D 120° Bases 60� 59� 24� 11/4� KHATTYV5924( ) 1,062. n/a n/a n/a n/a

Antenna 120° Top30� Deep

For use with 24�D 120° Bases 48� 47� 30� 11/4� KHATTYV4730( ) 888. 1,961. 1,961. 2,221. 2,887.For use with 24�D 120° Bases 54� 53� 30� 11/4� KHATTYV5330( ) 1,096. n/a n/a n/a n/aFor use with 24�D 120° Bases 60� 59� 30� 11/4� KHATTYV5930( ) 1,161. n/a n/a n/a n/a

Order Code

Antenna Tops

Example: KHATTYR5130L, 118,118

KHATT k.™ stand topY Antenna StyleR Rectangular Top51 Width30 DepthL Laminate118 Bright White Laminate118 Bright White Edge


Antenna Tops



Application Notes

Antenna Tops


Actual worksurfaces are undersizedby 11/2� on each side edge.


Options

Antenna Tops


k.™ stand

10

Reff Profiles WorksurfacesTops for C-Leg Tables24�, 30� and 36� Deep Rectangular

description type w* w d* d h pattern no. laminate (L) Mixed(M) V1(V) V2(V) V3(V)

Reff Profiles C-Leg Tops,24� Deep

For 24�D C-Leg Base 48� 46� 24� 23� 11/4� KHATTRR4623N $493. $535. $535. $613. $826.For 24�D C-Leg Base 54� 52� 24� 23� 11/4� KHATTRR5223N 527. 568. 568. 655. 883.For 24�D C-Leg Base 60� 58� 24� 23� 11/4� KHATTRR5823N 571. 610. 610. 698. 945.For 24�D C-Leg Base 66� 64� 24� 23� 11/4� KHATTRR6423N 584. 628. 628. 724. 976.For 24�D C-Leg Base 72� 70� 24� 23� 11/4� KHATTRR7023N 615. 657. 657. 758. 1,023.For 24�D C-Leg Base 78� 76� 24� 23� 11/4� KHATTRR7623N 641. 687. 687. 795. 1,070.

Reff Profiles C-Leg andT-Leg Tops,30� Deep

For 30�D C-Leg & T-Leg Bases 48� 46� 30� 29� 11/4� KHATTRR4629N 561. 600. 600. 688. 931.For 30�D C-Leg & T-Leg Bases 54� 52� 30� 29� 11/4� KHATTRR5229N 607. 650. 650. 744. 1,004.For 30�D C-Leg & T-Leg Bases 60� 58� 30� 29� 11/4� KHATTRR5829N 628. 671. 671. 771. 1,043.For 30�D C-Leg & T-Leg Bases 66� 64� 30� 29� 11/4� KHATTRR6429N 640. 686. 686. 794. 1,069.For 30�D C-Leg & T-Leg Bases 72� 70� 30� 29� 11/4� KHATTRR7029N 659. 705. 705. 808. 1,091.For 30�D C-Leg & T-Leg Bases 78� 76� 30� 29� 11/4� KHATTRR7629N 689. 736. 736. 848. 1,143.

Reff Profiles T-Leg Tops,36� Deep

For 30�D T-Leg Base 48� 46� 36� 35� 11/4� KHATTRR4635N 653. 702. 702. 809. 1,086.For 30�D T-Leg Base 52 54� 36� 35� 11/4� KHATTRR5235N 713. 765. 765. 876. 1,177.For 30�D T-Leg Base 58� 60� 36� 35� 11/4� KHATTRR5835N 723. 775. 775. 889. 1,200.For 30�D T-Leg Base 64� 66� 36� 35� 11/4� KHATTRR6435N 749. 801. 801. 925. 1,247.For 30�D T-Leg Base 70� 72� 36� 35� 11/4� KHATTRR7035N 775. 830. 830. 955. 1,290.For 30�D T-Leg Base 76� 78� 36� 35� 11/4� KHATTRR7635N 825. 885. 885. 1,018. 1,375.

Reff Profiles Top for CornerBases 24� Deep

Primary top for 90° DegreeCorner Base. To be used withperpendicular return.

47� 47� 24� 23� 11/4� KHATTRR4723N 493. 535. 535. 613. 826.

Order Code

Reff Profiles Tops

Example: KHATTRR5229NL, 118

KHATT k.™ stand topR Reff Profiles TopR Rectangular Top52 Width29 DepthN No GrommetL Laminate118 Bright White Laminate118 Bright White Edge


Reff Profiles Tops



Application Notes

Reff Profiles Tops


Actual worksurfaces are undersizedby 1� on each side edge and by 1�on the back side.


Options

Reff Profiles Tops


k.™ stand

11

Reff Profiles WorksurfacesTops for C-Leg Tables24�, 30� and 36� Deep Rectangular

description type w* w d* d h pattern no. laminate (L) Mixed(M) V1(V) V2(V) V3(V)

Reff Profiles Top for CornerBases, 30� Deep


47� 47� 30� 29� 11/4� KHATTRR4729N $561. $600. $600. $688. $931.

Order Code

Reff Profiles Tops

Example: KHATTRR5229NL, 118

KHATT k.™ stand topR Reff Profiles TopR Rectangular Top52 Width29 DepthN No GrommetL Laminate118 Bright White Laminate118 Bright White Edge


Reff Profiles Tops



Application Notes

Reff Profiles Tops




Options

Reff Profiles Tops


k.™ stand

12

Dividends Horizon WorksurfacesTops for C-Leg Tables24� and 30� Deep Rectangular

description type w* w d* d h pattern no.Laminate

w/ ABS edge

Laminatewith woodgrain

edge

Techwoodw/ Techwood

Edge

Dividends Horizon C-LegTops, 24� Deep

For 24�D C-Leg Base 48� 46� 24� 23� 11/4� KHATTDR4623N $336. $372. $606.For 24�D C-Leg Base 54� 52� 24� 23� 11/4� KHATTDR5223N 366. 402. 639.For 24�D C-Leg Base 60� 58� 24� 23� 11/4� KHATTDR5823N 397. 434. 670.For 24�D C-Leg Base 66� 64� 24� 23� 11/4� KHATTDR6423N 425. 468. 698.For 24�D C-Leg Base 72� 70� 24� 23� 11/4� KHATTDR7023N 444. 491. 729.For 24�D C-Leg Base 78� 76� 24� 23� 11/4� KHATTDR7623N 478. 524. 764.

Dividends Horizon C-Leg &T-Leg Tops, 30� Deep

For 30�D C-Leg & T-Leg Bases 48� 46� 30� 29� 11/4� KHATTDR4629N 397. 434. 667.For 30�D C-Leg & T-Leg Bases 54� 52� 30� 29� 11/4� KHATTDR5229N 448. 492. 696.For 30�D C-Leg & T-Leg Bases 60� 58� 30� 29� 11/4� KHATTDR5829N 493. 544. 726.For 30�D C-Leg & T-Leg Bases 66� 64� 30� 29� 11/4� KHATTDR6429N 548. 604. 754.For 30�D C-Leg & T-Leg Bases 72� 70� 30� 29� 11/4� KHATTDR7029N 570. 624. 781.For 30�D C-Leg & T-Leg Bases 78� 76� 30� 29� 11/4� KHATTDR7629N 608. 674. 820.

Dividends Horizon T-LegTops, 36� Deep

For 30�D T-Leg Base 48� 46� 36� 35� 11/4� KHATTDR4635N 518. 556. 791.For 30�D T-Leg Base 54� 52� 36� 35� 11/4� KHATTDR5235N 572. 616. 821.For 30�D T-Leg Base 60� 58� 36� 35� 11/4� KHATTDR5835N 631. 694. 861.For 30�D T-Leg Base 66� 64� 36� 35� 11/4� KHATTDR6435N 697. 770. 891.For 30�D T-Leg Base 72� 70� 36� 35� 11/4� KHATTDR7035N 770. 848. 924.For 30�D T-Leg Base 78� 76� 36� 35� 11/4� KHATTDR7635N 820. 870. 931.

Dividends Tops for CornerBases, 24� Deep


47� 47� 24� 23� 11/4� KHATTDR4723N 336. 372. 606.

Dividends Top for CornerBases,30� Deep


47� 47� 30� 29� 11/4� KHATTDR4729N 397. 434. 667.

Order Code

Dividends Horizon Tops

Example: KHATTDR5429N, L 118

KHATT k.™ stand topD Dividends Horizon TopR Rectangular Top54 Width29 DepthN No GrommetL Laminate118 Bright White Laminate118 Bright White Edge




(laminate tops only)

Application Notes



Actual worksurfaces are undersizedby 1 ‘‘ on each side edge and by 1�on the back side.


Options


Top Finish Options:Add an (L) for laminate to patternnumber.

k.™ stand

13

Postform WorksurfacesTops for C-Leg Tables24�, 30� and 36� Deep Rectangular

description type w* w d* d h pattern no. L V1 V2

Postform C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 48� 46� 24� 23� 11/4� KHATTMR4623( ) $485. $799. $1,254.For use with 30�D T-Leg Base 54� 52� 24� 23� 11/4� KHATTMR5223( ) 532. 898. 1,372.For use with 24�D C-Leg Base 60� 58� 24� 23� 11/4� KHATTMR5823( ) 574. 941. 1,441.For use with 24�D C-Leg Base 66� 64� 24� 23� 11/4� KHATTMR6423( ) 621. 1,039. 1,594.For use with 24�D C-Leg Base 72� 70� 24� 23� 11/4� KHATTMR7023( ) 665. 1,108. 1,746.For use with 24�D C-Leg Base 78� 76� 24� 23� 11/4� KHATTMR7623( ) 708. 1,143. 1,821.

Postform C-Leg & T-Leg Tops,30� Deep

For use with 30�D C-Leg & T-Leg Bases 48� 46� 30� 29� 11/4� KHATTMR4629( ) 553. 894. 1,368.For use with 30�D C-Leg & T-Leg Bases 54� 52� 30� 29� 11/4� KHATTMR5229( ) 595. 992. 1,492.For use with 30�D C-Leg & T-Leg Bases 60� 58� 30� 29� 11/4� KHATTMR5829( ) 640. 1,061. 1,617.For use with 30�D C-Leg & T-Leg Bases 66� 64� 30� 29� 11/4� KHATTMR6429( ) 684. 1,127. 1,763.For use with 30�D C-Leg & T-Leg Bases 72� 70� 30� 29� 11/4� KHATTMR7029( ) 750. 1,220. 1,884.For use with 30�D C-Leg & T-Leg Bases 78� 76� 30� 29� 11/4� KHATTMR7629( ) 797. 1,284. 1,982.

Postform T-Leg Tops,36� Deep

For use with 24�D C-Leg Base 48� 46� 36� 35� 11/4� KHATTMR4635( ) 621. 989. 1,483.For use with 24�D C-Leg Base 52� 54� 36� 35� 11/4� KHATTMR5235( ) 657. 1,090. 1,614.For use with 24�D C-Leg Base 58� 60� 36� 35� 11/4� KHATTMR5835( ) 709. 1,183. 1,792.For use with 24�D C-Leg Base 64� 66� 36� 35� 11/4� KHATTMR6435( ) 742. 1,216. 1,932.For use with 24�D C-Leg Base 70� 72� 36� 35� 11/4� KHATTMR7035( ) 883. 1,332. 2,020.

Postform Top for Corner Base24� Deep

Primary top for 90° Degree Corner Base.To be used with perpendicular return.

47� 47� 30� 29� 11/4� KHATTMR4723( ) 485. 799. 1,254.

Postform Top for Corner Base30� Deep

Primary top for 90° Degree Corner Base.To be used with perpendicular return.

47� 47� 30� 29� 11/4� KHATTMR4729( ) 553. 894. 1,368.

Order Code

Postform Tops

Example: KHATTMR5229L, 118

KHATT k.™ stand topM Postform TopR Rectangular Top52 Width29 DepthL Laminate118 Bright White Laminate


Postform Tops

To order, specify:1. Pattern number2. Top Finish

Application Notes

Postform Tops




Options

Postform Tops

Top Finish Options:Add an (L) for laminate,(V) for veneer suffix to patternnumber.

k.™ stand

14

AutoStrada WorksurfacesTops for C-Leg Tables30� Deep Rectangular

description type w* w d* d h pattern no. laminate (L) Mix V1(V) V2(V) V3(V)

AutoStrada C-Leg Tops, 24� Deep For use with 24�D C-Leg Base 48� 46� 24� 23� 11/4� KHATTAR4623( )N $577. $751. $823. $869. $1,130.For use with 24�D C-Leg Base 54� 52� 24� 23� 11/4� KHATTAR5223( )N 582. 801. 879. 931. 1,210.For use with 24�D C-Leg Base 60� 58� 24� 23� 11/4� KHATTAR5823( )N 611. 858. 940. 995. 1,292.For use with 24�D C-Leg Base 66� 64� 24� 23� 11/4� KHATTAR6423( )N 662. 890. 976. 1,027. 1,337.For use with 24�D C-Leg Base 72� 70� 24� 23� 11/4� KHATTAR7023( )N 681. 927. 1,016. 1,077. 1,401.For use with 24�D C-Leg Base 78� 76� 24� 23� 11/4� KHATTAR7623( )N 701. 969. 1,063. 1,130. 1,469.

AutoStrada C-Leg Tops, 30� Deep For use with 30�D C-Leg Base 48� 46� 30� 29� 11/4� KHATTAR4629( )N 591. 845. 926. 983. 1,280.For use with 30�D C-Leg Base 54� 52� 30� 29� 11/4� KHATTAR5229( )N 607. 912. 1,001. 1,060. 1,379.For use with 30�D C-Leg Base 60� 58� 30� 29� 11/4� KHATTAR5829( )N 645. 947. 1,039. 1,098. 1,427.For use with 30�D C-Leg Base 66� 64� 30� 29� 11/4� KHATTAR6429( )N 693. 968. 1,062. 1,124. 1,462.For use with 30�D C-Leg Base 72� 70� 30� 29� 11/4� KHATTAR7029( )N 715. 994. 1,090. 1,153. 1,499.For use with 30�D C-Leg Base 78� 76� 30� 29� 11/4� KHATTAR7629( )N 741. 1,038. 1,139. 1,209. 1,569.

AutoStrada C-Leg & T-Leg Tops,36� Deep

For use with 30�D T-Leg Base 48� 46� 36� 35� 11/4� KHATTAR4635( )N 639. 955. 1,045. 1,111. 1,446.For use with 30�D T-Leg Base 54� 52� 36� 35� 11/4� KHATTAR5235( )N 659. 1,049. 1,149. 1,206. 1,568.For use with 30�D T-Leg Base 60� 58� 36� 35� 11/4� KHATTAR5835( )N 665. 1,052. 1,153. 1,213. 1,576.For use with 30�D T-Leg Base 66� 64� 36� 35� 11/4� KHATTAR6435( )N 737. 1,056. 1,159. 1,232. 1,600.For use with 30�D T-Leg Base 72� 70� 36� 35� 11/4� KHATTAR7035( )N 762. 1,087. 1,192. 1,262. 1,642.For use with 30�D T-Leg Base 78� 76� 36� 35� 11/4� KHATTAR7635( )N 798. 1,110. 1,217. 1,295. 1,683.

AutoStrada Top for Corner Base,24� Deep


47� 47� 24� 23� 11/4� KHATTAR4723( )N 577. 751. 823. 869. 1,130.

AutoStrada Top for Corner Bases30� Deep


47� 47� 30� 29� 11/4� KHATTAR4729( )N 591. 845. 926. 983. 1,280.

Order Code

AutoStrada Tops

Example: KHATTAR5229( )N, 118

KHATT k.™ stand topAR AutoStrada TopR Rectangular Top52 Width29 DepthL LaminateN No Grommet118 Bright White Laminate118 Bright White Edge


AutoStrada Tops



Application Notes

AutoStrada Tops



A stiffener is required onworksurfaces that are 72� (nominal)or wider and all returns on 90°corner bases.

Options

AutoStrada Tops

Top Finish Options:Add an (L) for laminate,(V) for veneer suffix or(M) for mixed suffixto pattern number.

k.™ stand

15

Accessories

description type w d h pattern no. list

Digital Switch For k.stand Electric and Extended Electric,Generation 2

41/2� 11/4� KHATA2DS $250.

k.stand Casters, Kit of 4 2 locking, 2 non-locking 2� 11/2� 11/2� KHATA2CAS2 106.

k.stand Casters, Kit of 5 3 locking, 2 non-locking 2� 11/4� 11/2� KHATA2CAS3 137.

Power Strip For use on Tone and k.stand Height AdjustableTables

243/4� 2� 2� TBPS24 398.

Cleat Plate For use on Tone and k.stand Height AdjustableTables

25� 33/4� 21/4� TBCP 129.

Vertical Wire Manager For use on Tone and k.stand Standard Electric 1� 3/4� 161/2� TBVWMES 32.For use with Tone and k.stand Extended Electric 1� 3/4� 20� TBVWMEX 32.

Worksurface Reinforcement 54� 4� DB1WR54 75.60� 4� DB1WR60 76.66� 4� DB1WR66 79.72� 4� DB1WR72 82.

Flat Brackets (Single Pack) For 24�D Worksurface 33/4� 145/8� DB1F24SP 32.For 30�D Worksurface 33/4� 2015/16� DB1F30SP 37.

Order Code

Digital Switch

Example: KHATDS

KHAT k.™ standDS Digital Switch


1. Digital Switch ships with cord.2. Casters cannot be used on 24�D

k.stand nor on k.stand with deskmounted privacy screens ormodesty panels. Casters raise theoverall height of the table 11/2�.

3. A stiffener is required onworksurfaces that are 72�(nominal) or wider and on allreturns on 90° corner bases.A stiffener is recommended onall worksurfaces.

Notes:Extended Electric Z-Manager isonly compatible with StandardElectric k.™ stand bases. Foot ispre-drilled to accept the Z-Manager.

k.™ stand

16

Accessories

description type w d h pattern no. list

Flat Brackets (Pack of 10) For 24�D Worksurface 33/4� 145/8� DB1F24TP $258.For 30�D Worksurface 33/4� 2015/16� DB1F30TP 296.

Tone Hinged Wire cover For k.™ stand Adjustable-Width Bases 28� 71/2� 2� TBHCPC 135.

Tone Z-Manger For use on k.™ stand Standard Electric Baseonly

TBZEX 212.

Order Code

Digital Switch

Example: KHATDS

KHAT k.™ standDS Digital Switch


1. Digital Switch ships with cord.2. Casters cannot be used on 24�D

k.stand nor on k.stand with deskmounted privacy screens ormodesty panels. Casters raise theoverall height of the table 11/2�.

3. A stiffener is required onworksurfaces that are 72�(nominal) or wider and on allreturns on 90° corner bases.A stiffener is recommended onall worksurfaces.

Notes:Extended Electric Z-Manager isonly compatible with StandardElectric k.™ stand bases. Foot ispre-drilled to accept the Z-Manager.

k.™ stand

17

pattern no. page

DB1F24SP 16

DB1F24TP 17

DB1F30SP 16

DB1F30TP 17

DB1WR54 16

DB1WR60 16

DB1WR66 16

DB1WR72 16

KHATA2CAS2 16

KHATA2CAS3 16

KHATA2DS 16

KHATB2CEA24G 7

KHATB2CEA30G 7

KHATB2CEXA24G 8

KHATB2CEXA30G 8

KHATB2KEA24G 7

KHATB2KEXA24G 8

KHATB2TEA30G 7

KHATB2TEXA30G 8

KHATB2VEA24G 7

KHATB2VEXA24G 8

KHATTAR4623 15

KHATTAR4629 15

KHATTAR4635 15

KHATTAR4723 15

KHATTAR4729 15

KHATTAR5223 15

KHATTAR5229 15

KHATTAR5235 15

KHATTAR5823 15

KHATTAR5829 15

KHATTAR5835 15

KHATTAR6423 15

KHATTAR6429 15

KHATTAR6435 15

KHATTAR7023 15

KHATTAR7029 15

KHATTAR7035 15

KHATTAR7623 15

KHATTAR7629 15

KHATTAR7635 15

KHATTDR4623N 13

KHATTDR4629N 13

KHATTDR4635N 13

KHATTDR4723N 13

KHATTDR4729N 13

KHATTDR5223N 13

KHATTDR5229N 13

KHATTDR5235N 13

KHATTDR5823N 13

KHATTDR5829N 13

KHATTDR5835N 13

KHATTDR6423N 13

KHATTDR6429N 13

KHATTDR6435N 13

KHATTDR7023N 13

KHATTDR7029N 13

KHATTDR7035N 13

KHATTDR7623N 13

KHATTDR7629N 13

KHATTDR7635N 13

pattern no. page

KHATTMR4623 14

KHATTMR4629 14

KHATTMR4635 14

KHATTMR4723 14

KHATTMR4729 14

KHATTMR5223 14

KHATTMR5229 14

KHATTMR5235 14

KHATTMR5823 14

KHATTMR5829 14

KHATTMR5835 14

KHATTMR6423 14

KHATTMR6429 14

KHATTMR6435 14

KHATTMR7023 14

KHATTMR7029 14

KHATTMR7035 14

KHATTMR7623 14

KHATTMR7629 14

KHATTRR4623N 11

KHATTRR4629N 11

KHATTRR4635N 11

KHATTRR4723N 11

KHATTRR4729N 12

KHATTRR5223N 11

KHATTRR5229N 11

KHATTRR5235N 11

KHATTRR5823N 11

KHATTRR5829N 11

KHATTRR5835N 11

KHATTRR6423N 11

KHATTRR6429N 11

KHATTRR6435N 11

KHATTRR7023N 11

KHATTRR7029N 11

KHATTRR7035N 11

KHATTRR7623N 11

KHATTRR7629N 11

KHATTRR7635N 11

KHATTYR4524 9

KHATTYR4530 9

KHATTYR4536 9

KHATTYR4724 10

KHATTYR4730 10

KHATTYR5124 9

KHATTYR5130 9

KHATTYR5136 9

KHATTYR5724 9

KHATTYR5730 9

KHATTYR5736 9

KHATTYR6324 9

KHATTYR6330 9

KHATTYR6336 9

KHATTYR6924 9

KHATTYR6930 9

KHATTYR6936 9

KHATTYR7524 9

KHATTYR7530 9

KHATTYR7536 9

KHATTYV4724 10

KHATTYV4730 10

pattern no. page

KHATTYV5324 10

KHATTYV5330 10

KHATTYV5924 10

KHATTYV5930 10

TBCP 16

TBHCPC 17

TBPS24 16

TBVWMES 16

TBVWMEX 16

TBZEX 17

Alpha-Numeric Index k.™ stand

18

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.

Selling Policy

19June 15, 2019

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable

warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

20June 15, 2019

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

21

Documents

k. stand - knoll.comPLKS0319) 2.pdf · 509 Cherry 512 Medium Walnut 513 Medium Teak 514 Espresso 637 Natural 644 Light Walnut 645 Dove Grey ... 90° Corner Base Adjustable-width base