Upload
lenguyet
View
227
Download
1
Embed Size (px)
Citation preview
SHORT FRONT FENDERS
K40080 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 4.75” WIDE / UN-DRILLEDK40081 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 4.75” WIDE / DRILLED (SHOWN)K40088 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 5.50” WIDE / UN-DRILLEDK40089 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 5.50” WIDE / DRILLED (SHOWN)
LONG FRONT FENDERS
K40090 FENDER/FRONT/LONG / FOR 21” WHEELS / 4.25” WIDE (STRETCHED)K40083 FENDER/FRONT/LONG / FOR 21” WHEELS / 4.75” WIDE (TRIMMED)K40091 FENDER/FRONT/LONG / FOR 21” WHEELS / 5.50” WIDE (STRETCHED)
ROUND TOP FRONT FENDERS / FOR 21” WHEELS* These heavy duty 14 gauge steel fenders are the ideal match for today’s 21” tires* They are manufactured by a deep-draw process, resulting in a single cohesive structure that’s molecularly sound and able to take the abuse of the hard-riding American biker
83
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
ROUND TOP FRONT FENDERS / FOR 21” WHEELS
K40094 FENDER/FRONT/STRETCHED . . . FOR 21” WHEELS 4.25” WIDE / SQUARE CUT-BOTTOMK40084 FENDER/FRONT/STRETCHED . . . FOR 21” WHEELS 4.75” WIDE / SQUARE CUT-BOTTOMK40095 FENDER/FRONT/STRETCHED . . . FOR 21” WHEELS 5.50” WIDE / SQUARE CUT-BOTTOM
K40092 FENDER/FRONT/BLANK . . . FOR 21” WHEELS/ 4.25” WIDE / UN-TRIMMEDK40082 FENDER/FRONT/BLANK . . . FOR 21” WHEELS / 4.75” WIDE / UN-TRIMMEDK40093 FENDER/FRONT/BLANK . . . FOR 21” WHEELS / 5.50” WIDE / UN-TRIMMED
* These heavy duty 14 gauge steel fenders are the ideal match for today’s 21” tires* They are manufactured by a deep-draw process, resulting in a single cohesive structure that’s molecularly sound and able to take the abuse of the hard-riding American biker
STRETCHED FRONT FENDERw/SQUARE-CUT BOTTOM
84
BLANK FRONT FENDERS
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
ROUND TOP FRONT FENDERS FOR 21” WHEELS
K40081 K40083
85
CUSTOM CLAW FRONT FENDER
K40086 FENDER/FRONT/CUSTOM CLAW FOR 21” WHEELS / 4.25” WIDEK40087 FENDER/FRONT/CUSTOM CLAW FOR 21” WHEELS / 5.50” WIDE
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
FENDERS / STRUTLESS FOR 180 & 230/240 SOFTAIL-STYLE FRAMES * These self-supporting 14 gauge steel beauties are, without a doubt, the cure-all for every custom builder * Fender mounting is fast...prep for painting is minimal * Fenders feature welded-in dual wiring tubes and built-in electrical boxes * Available in 9” & 11” wide versions for Softail-style Evolution frames as well as Softail-style Twin Cam 88B frames
FOR EVO SOFTAIL-STYLE FRAMES
FOR TWIN CAM 88B STYLE FRAMES
K40040 FENDER/STRUTLESS/ROUND TOP . . . 9” WIDE FOR 180 TIRE SOFTAIL STYLE FRAMESK40041 FENDER/STRUTLESS/ROUND TOP . . . 11” WIDE FOR 230/240 TIRE SOFTAIL STYLE FRAMES
K40044 FENDER/STRUTLESS/ROUND TOP . . . 9” WIDE FOR 180 TIRE SOFTAIL STYLE TC-88B FRAMESK40043 FENDER/STRUTLESS/ROUND TOP . . . 11” WIDE FOR 230/240 TIRE SOFTAIL STYLE TC-88B FRAMES
K40079 FENDER . . . 9” WIDE FOR SOFTAIL MODELS 1984 TO PRESENT AND CUSTOM APPLICATIONS
FAT BOB FENDER
This steel rear fender was designed not to split, it’s made from one piece in 0.060" (16 gauge) steel which has beenphosphate etched to help prevent corrosion and to give a good base for primers to adhere. The fender is 9" wide, has a more rounded profile across the top to match with today's lower profile tires, a rolled edge along the sides to give more stylish look and an ignition module mounting position already set in. Willaccommodate big wheel conversions with tires up to 200 wide.
FOR SOFTAIL MODELS 1984 TO PRESENT AND CUSTOM APPLICATIONS
86
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
87
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
K40101 12-1/2” WIDE ROUND TOP STRUTLESS FENDER FOR 280 TIRE TC 88B STYLE FRAMESK40103 13-1/2” WIDE ROUND TOP STRUTLESS FENDER FOR 300 TIRE TC 88B STYLE FRAMES
Fenders / Struts
WIDE ROUND TOP STRUTLESS FENDERS FOR 280, 300 & 330 WIDTH TIRES FOR 280, 300 & 330 TIRE SOFTAIL-STYLE FRAMES
K40100 12-1/2” WIDE ROUND TOP STRUTLESS FENDER FOR 280 TIRE EvO STYLE FRAMESK40102 13-1/2" WIDE ROUND TOP STRUTLESS FENDER FOR 300 TIRE EvO STYLE FRAMESK40104 14-1/4" WIDE ROUND TOP STRUTLESS FENDER FOR 330 TIRE EvO STYLE FRAMES
* These self supporting 14 guage steel beauties are, without a doubt, the cure-all for every custom builder
* Fender mounting is fast. . .prep for painting is minimal
* Fenders feature welded-in dual wiring tubes and built-in electrical boxes
FOR EVO SOFTAIL-STYLE FRAMES
FOR TWIN CAM 88B STYLE FRAMES
88
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
FENDERS w/EXTERNALLY WELDED STRUTSFOR 180/200 & 230/240/250 SOFTAIL-STYLE FRAMES
K40037 FENDER . . . EXTERNALLY WELDED STRUTS / 9” WIDE FOR 180/200 TIRE SOFTAIL-STYLE FRAMES
K40038 FENDER . . . EXTERNALLY WELDED STRUTS / 11” WIDE FOR 230/240/250 SOFTAIL-STYLE FRAMES
* Heavy duty 14 gauge steel fenders featuring externally welded struts, providing substantial strength with clean, flowing lines * These one-piece, round top fenders eliminate the need for drilling and time consuming fitment of the fender to the frame * 9” and 11” wide versions available * Mounting hardware is included
K40039 FENDER . . . EXTERNALLY WELDED STRUTS / 9” WIDE FOR 180/200 TIRE TC 88B SOFTAIL-STYLE FRAMES
Fenders / Struts
89
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
ROUND TOP REAR FENDERS FOR WIDE TIRE SOFTAIL-STYLE FRAMES* These top quality fenders have been manufactured from thick 14 gauge steel using a deep-draw process that delivers a single, strong one-piece fender. . .you won’t find any welded-together fenders here.* Each of the trimmed models have been engineered to follow the radius of today’s lower profile tires resulting in the most effective coverage without sacrificing design harmony* Available in trimmed versions, with additional reinforcement at the fender tip or full, un-trimmed versions for your custom design applications * Choose from fender widths of 9” (for 180/200 tires & frames), 11” (for 230/240/250 tires & frames), 12-1/2” (for 280 tire & frame) and 13-1/2” (for 300 tire & frame)
K40051 FENDER/REAR/ROUND TOP . . . 9” WIDE FOR SOFTAILS / TRIMMED MODELK40053 FENDER/REAR/ROUND TOP . . . 11” WIDE FOR SOFTAILS / TRIMMED MODEL
9” & 11” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
K40050 FENDER/REAR/ROUND TOP . . . 9” WIDE FOR SOFTAILS / UN-TRIMMED MODELK40052 FENDER/REAR/ROUND TOP . . . 11” WIDE FOR SOFTAILS / UN-TRIMMED MODEL
12-1/2” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
13-1/2” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
K40060 FENDER/REAR/ROUND TOP . . . 12-1/2” WIDE FOR SOFTAILS UN-TRIMMED MODEL
K40061 FENDER/REAR/ROUND TOP . . . 12-1/2” WIDE FOR SOFTAILS TRIMMED MODEL
90
K40064 FENDER/REAR/ROUND TOP . . . 13-1/2” WIDE FOR SOFTAILS UN-TRIMMED MODEL
K40065 FENDER/REAR/ROUND TOP . . . 13-1/2” WIDE FOR SOFTAILS TRIMMED MODEL
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
91
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
ROUND TOP REAR FENDERS FOR RIGID FRAMES
ROUND TOP REAR FENDERS FOR RIGID SPORTSTER FRAMES
* Wide & stylish rigid frame fenders offered in five widths . . . 9”, 11”, 12-1/2”, 13-1/2” and 14-1/4" wide* These round top fenders are made from thick 14 gauge steel, deep-drawn, resulting in a single formed shape* Yes, thick, wide one-piece fenders. . .these are not your ordinary welded down-the-middle fenders, destined to break over time* All of these fenders feature a reinforced tip area for taillight and/or license plate mounting* Available in full un-trimmed versions or ready-to-mount trimmed models
* Stylish Sportster Rigid frame fender offered in 9" width* This round top fender is made from thick 14 gauge steel, deep-drawn, resulting in a single formed shape* One-piece fenders. . .these are not your ordinary welded down-the-middle fenders, destined to break over time* All of these fenders feature a reinforced tip area for taillight and/or license plate mounting
K40054 FENDER/REAR/ROUND TOP / 9” WIDE FOR RIGID FRAMES / UN-TRIMMED MODEL
K40056 FENDER/REAR/ROUND TOP / 11” WIDE FOR RIGID FRAMES / UN-TRIMMED MODEL
K40055 FENDER/REAR/ROUND TOP / 9” WIDE FOR RIGID FRAMES / TRIMMED MODEL FEATURES LEFT SIDE CUTAWAYK40057 FENDER/REAR/ROUND TOP / 11” WIDE FOR RIGID FRAMES / TRIMMED MODEL FEATURES LEFT SIDE CUTAWAY
K40096 FENDER/REAR/ROUND TOP / 9” WIDE FOR RIGID FRAMES / TRIMMED / NO BELT CUT OUT
9” & 11” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
K40098 FENDER/REAR/ROUND TOP / 9” WIDE FOR RIGID SPORTSTER FRAMES / TRIMMED / RIGHT-SIDE BELT CUT OUT
92
K40059 FENDER/REAR/ROUND TOP / 12-1/2” WIDE FOR RIGID FRAMES w/280 TIRE / TRIMMED FEATURES LEFT SIDE CUTAWAYK40067 FENDER/REAR/ROUND TOP / 13-1/2” WIDE FOR RIGID FRAMES w/300 TIRE / TRIMMED FEATURES LEFT SIDE CUTAWAY
K40058 FENDER/REAR/ROUND TOP / 12-1/2” WIDE FOR RIGID FRAMES w/280 TIRE / UN-TRIMMED
K40066 FENDER/REAR/ROUND TOP / 13-1/2” WIDE FOR RIGID FRAMES w/300 TIRE / UN-TRIMMED
12-1/2” & 13-1/2” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
12-1/2” & 13-1/2” WIDE ROUND TOP FENDERS FOR RIGID FRAMES RIGHT SIDE CUTAWAY
K40070 FENDER/REAR/ROUND TOP / 12-1/2” WIDE FOR RIGID FRAMES w/280 TIRE / TRIMMED FEATURES RIGHT SIDE CUTAWAY
K40069 FENDER/REAR/ROUND TOP / 13-1/2” WIDE FOR RIGID FRAMES w/300 TIRE / TRIMMED FEATURES RIGHT SIDE CUTAWAY
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
ROUND TOP REAR FENDERS FOR RIGID FRAMES
14-1/4” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
K40110 14-1/4” CUSTOM ROUND TOP RIGID REAR FENDER FOR LOWER PROFILE TIRES - UNTRIMMEDK40111 14-1/4” CUSTOM ROUND TOP RIGID REAR FENDER FOR LOWER PROFILE TIRES - TRIMMED / NO CHAIN CUTK40112 14-1/4” CUSTOM ROUND TOP RIGID REAR FENDER FOR LOWER PROFILE TIRES - RIGHT SIDE CHAIN CUT
RIGHT SIDE CHAIN CUTTRIMMED / NO CHAIN CUT
K30017
FENDER BRACE FITS OUR 180 SPORTSTER RIGID FRAME 3/8" AXLE CARRIERUSE THIS BRACE TO MOUNT THE 9” WIDE SPORTSTER ROUND TOP FENDERS
K30008 FENDER BRACE/ FITS OUR 180 RIGID FRAMES 3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 9” WIDE ROUND TOP FENDERS
K30009 FENDER BRACE/ FITS OUR 230-240-250 RIGID FRAMES / 1-1/2" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 11” WIDE ROUND TOP FENDERS
K30010 FENDER BRACE/ FITS OUR 280 RIGID FRAMES 1-1/2" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 12-1/2” WIDE ROUND TOP FENDERS
K30011 FENDER BRACE/ FITS OUR 300 RIGID FRAMES 1-1/2" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 13-1/2” WIDE ROUND TOP FENDERS
K30012 FENDER BRACE/ FITS OUR 200 RIGID FRAMES 3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 9” WIDE ROUND TOP FENDERS
K30013 FENDER BRACE/ FITS OUR 230-240-250 RIGID FRAMES / 3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 11” WIDE ROUND TOP FENDERS
K30014 FENDER BRACE/ FITS OUR 180 RIGID FRAMES 1-3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 9” WIDE ROUND TOP FENDERS
K30015 FENDER BRACE/ FITS OUR 200 RIGID FRAMES 1-3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 9” WIDE ROUND TOP FENDERS
K30016 FENDER BRACE/ FITS OUR 230-240-250 RIGID FRAMES 1-3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 11” WIDE ROUND TOP FENDERS Requires welding
ROUND TOP REAR FENDERS FOR RIGID FRAMES
93
The round top 1-piece wonder, 11” wide for fitment on 230-240-250 tire, 12-1/2” wide for fitment on 280 tire and 13-1/2” wide for fitment on 300 tire width frames . . . right or left side drive models. This fender is trimmed to fit the tire radius and features no cutaway for belt or chain (requires trimming on drive side)
RIGHT OR LEFT SIDE DRIVE MODELS
K40063 FENDER/REAR/ROUND TOP / 11” WIDE FOR RIGID FRAMES w/230-240-250 TIRE TRIMMED MODEL / WITHOUT CUTAWAY
K40062 FENDER/REAR/ROUND TOP / 12-1/2” WIDE FOR RIGID FRAMES w/280 TIRE TRIMMED MODEL / WITHOUT CUTAWAY
K40068 FENDER/REAR/ROUND TOP / 13-1/2” WIDE FOR RIGID FRAMES w/300 TIRE TRIMMED MODEL / WITHOUT CUTAWAY
FENDER BRACEFOR RIGID ROUND TOP FENDERS
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
Here’s our one-piece, deep-drawn 12-1/2” roundtop fender shown with mounting brace. The brace is fabricated from 1/4” thick steel, then styled to enhance the lines of frame, fender and that big, bad wheel & tire.
K40033 FENDER & STRUT KIT . . . 8-1/2” WIDE FLAT FENDER w/RAW STRUTS / FOR SOFTAIL STYLE FRAMES K40034 FENDER & STRUT KIT . . . 9” WIDE FLAT FENDER w/CHROME STRUTS / FOR SOFTAIL STYLE FRAMES K40035 FENDER & STRUT KIT . . . 9” WIDE FLAT FENDER w/RAW STRUTS / FOR SOFTAIL STYLE FRAMES
* Fender shown not the same as supplied in kits sold above
94
FENDER & STRUT KITS FOR SOFTAIL-STYLE FRAMES * All in one kits featuring our heavy duty chromed (or raw) steel struts contoured to match the radius of our sturdy flat fenders * Struts feature internal mounting resulting in that clean custom look * Support braces and hardware included * Kits are available with 8-1/2” and 9” fenders
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
SKIRTED FENDERS * All steel construction / 14 Gauge * 48” long / available in widths of 7-1/2”, 8-1/2” and 9”
95
RADIUS-CUT SIDESK40007 SKIRTED FENDER . . . 7-1/2” WIDEK40008 SKIRTED FENDER . . . 8-1/2” WIDEK40009 SKIRTED FENDER . . . 9” WIDE
ANGLE-CUT SIDESK40017 SKIRTED FENDER . . . 9” WIDE
CURVED SIDESK40005 SKIRTED FENDER . . . 9” WIDE
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
FLAT FENDERS * Top quality 14 gauge steel construction * Each of these fenders measures 48” in length
K40001 6” WIDE | K40002 7-1/2” WIDE | K40003 8-1/2” WIDE | K40004 9” WIDE
FENDER BRACES
K30002 FOR 7-1/2” FENDERS K30003 FOR 8-1/2” FENDERS K30004 FOR 9” FENDERS
96
* Crafted specifically for rigid frame applications, these 1/4” thick chrome steel braces are available for 7-1/2”, 8-1/2”, 9” flat fenders* Braces are 1” wide and measure 12-1/2” from frame mount holes to fender mount holes
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
FENDER BRACES
* Designed to provide the necessary fender support on rigid frames, these braces are formed from 1/4” thick x 1” wide steel, then finished in bright chrome * Available for 5” & 6” flat fenders as well as a model for 7” wide fat bob fenders
K30005 FENDER BRACE / 5” & 6” FLAT FENDERS K30001 FENDER BRACE / 7” FAT BOB FENDERS
97
K30006 SISSY BAR / TILT-BACK STYLEK30007 SISSY BAR / STRAIGHT STYLE
SISSY BARS FOR RIGID FRAMES
These chrome steel sissy bars are manufactured from 5/8”round material. Both bars are designed to mate with flat fenders measuring 9” wide.
Available in two distinct styles. . . tilt-back and straight.
Tilt-back model measures 32” in height. Height above brace is 19”. Width (inside-to-inside) at the bottom is 11-1/2” .
Straight model measures 30-1/2” in height. Height above brace is 17-1/4”, Width (inside-to-inside) at the bottom mounts is 11-1/2”.
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
Braces
CURVED STRUT SETSK50007 FOR 7-1/2” FENDERS . . . CHROME K50005 FOR 8-1/2” FENDERS . . . CHROME K50013 FOR 8-1/2” FENDERS . . . RAWK50001 FOR 9” WIDE FENDERS . . . CHROME K50003 FOR 9” WIDE FENDERS . . . RAW
STRAIGHT STRUT SETSK50014 FOR 8-1/2” WIDE FENDERS . . . CHROME
K50004 FOR 8-1/2” WIDE FENDERS . . . RAWK50009 FOR 9” WIDE FENDERS . . . CHROMEK50011 FOR 9” WIDE FENDERS . . . RAW
FENDER STRUTS / SOFTAIL-STYLE * Softail-style strut sets featuring internal mounting holes for the clean custom look * Designed for Softail-style frames, as well as our frames * Crafted from 1/2” thick steel, these curved or straight struts are available for fitment to 7-1/2”, 8-1/2”, and 9” wide fenders * Mounting hardware (to frame) is included * Finished in bright chrome or raw, ready for prep and paint
98
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
FwdControls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
STRUT SETS
K50037 FOR 9” WIDE FENDERS . . . RAWK50038 FOR 11” WIDE FENDERS . . . RAW
SLOTTED CONTOUR
FENDER STRUTS / SOFTAIL-STYLE / CNC-RADIUSED * CNC-radiused steel fender struts designed for Softail-style frames, including our frames * Available for fitment to 7-1/2”, 8-1/2”, 9” , 11”, 12-1/2" and 13-1/2" wide fenders * Mounting bolts (to the frame) included * Lustrous chrome or raw finish * Offered in solid or slotted window design
99
Frames
Swingarms
FendersStruts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
FOR 11” WIDE FENDERSK50028 - RAW K50029 - CHROME
FOR 9” WIDE FENDERSK50024 - RAW K50025 - CHROME
FOR 8-1/2” WIDE FENDERSK50020 - RAW K50021 - CHROME
FOR 7-1/2” WIDE FENDERSK50016 - RAW K50017 - CHROME
FOR 11” WIDE FENDERSK50030 - RAW K50031 - CHROME
FOR 9” WIDE FENDERSK50026 - RAW K50027 - CHROME
FOR 8-1/2” WIDE FENDERSK50022 - RAW K50023 - CHROME
FOR 7-1/2” WIDE FENDERSK50018 - RAW K50019 - CHROME
SLOTTED CONTOUR STRUT SETS
SOLID CONTOUR
SOLID CONTOUR FOR 1-1/2" TUBING FRAMES
SOLID CONTOUR STRUT SETS
FOR 13-1/2” WIDE FENDERSK50035 - RAW
FOR 12-1/2” WIDE FENDERSK50032 - RAW
FOR 11” WIDE FENDERSK50039 - RAW
SOLID CONTOUR STRUT SETS