KARNATAK UNIVERSITY, DHARWAD University with · PDF fileKARNATAK UNIVERSITY, DHARWAD University with Potential for Excellence PLANNING, MONITORING & EVALUATION BOARD ... Core Alignment

E-mail : [email protected] : (0836) 2215311 / 2215297

KARNATAK UNIVERSITY, DHARWAD University with Potential for Excellence

PLANNING, MONITORING & EVALUATION BOARD Pavate Nagar, Dharwad-580 003, Karnataka-India

Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017

TENDER NOTIFICATION FOR ENABLING WI-FI AND LAN FICILITIES

(Through e-Procurement System only)

Tenders are invited from reputed Companies/ Authorized dealers for

enabling Wi-Fi facility and LAN to the Karnatak University, Dharwad–03.

The last date for submission of online tender form is 24 -03-2017. For more

details download the information from website: https://eproc.karnataka.gov.in

The Schedule of e-Procurement

1. Pre-bid meeting 09-03-2017 at 16.00 hrs

2. Last Date and Time of receipt of tender 24-03-2017 at 12.00 hrs

3. Date of Technical bid opening: 25-03-2017 at 12.05 hrs

4. Date and time of financial bid opening: 28-03-2017 at 13.00 hrs

Sd/-

REGISTRAR K. U. Dharwad

mailto:[email protected]

https://eproc.karnataka





TENDER NOTIFICATION (Through E-Procurement System only)

1. Tenders are invited from reputed Manufacturing Companies/Authorized dealers for the supply of Audio Video Equipments with the following details OFC 48 Cores : Outdoor, Feeder Cable, with inbuilt messenger wire / armored cable, with LSZH Jacket, Aerial, Heavy duty, EPON, SM, 10G SUPPORT

2. OFC 24 Cores : Outdoor, Feeder Cable, with inbuilt messenger wire / armored cable, with LSZH Jacket, Aerial, Heavy duty, EPON, SM, 10G SUPPORT

3. OFC 12 Cores : Outdoor, Distribution cable, with inbuilt messenger wire / armored cable, with LSZH Jacket, Aerial, Heavy Duty, EPON, SM, 10G SUPPORT

4. OFC 6 Cores : Outdoor, Drop Cable, with inbuilt messenger wire / armored cable, with LSZH Jacket, Aerial, Heavy Duty, EPON, SM, 10G SUPPORT

5. Fiber Termination Box : 48 Ports, Industry standard 6. Fiber Termination Box : 24 Ports, Industry standard 7. Fiber Termination Box : 12 Ports, Industry standard 8. Pigtails : 1 Mts, with network compatible connector 9. PLC Splitters 2 to 2 : High quality, with network compatible connector 10. PLC Splitters 2 to 4 : High quality, with network compatible connector 11. PLC Splitters 2 to 8 : High quality, with network compatible connector 12. Fiber patch chords : 3 Mts, heavy duty, with network compatible connector 13. UTP cable : CAT6, enterprise segment 14. OLT 4 PORTS : INCLUDING 4 OUTPUT PON SFP & 1 INPUT SFP, EPON, SM, 10G SUPPORT

Item EPON- OLT- 4 PORT EMD in INR Chassis Rack 1U 19 inch standard box

50,000/-

1000M Uplink Port

QTY 8

Copper 10/100/1000M auto-negotiable RJ45: 4pcs

SFP(Combo) 4 SFP slots, 2 slots must support 10G SFP

EPON Port

QTY 4 Physical Interface SFP Slots Connector Type 1000BASE-PX20 Max splitting ratio 1:64

Management Ports 1 10BASE-T out-band port, 1 CONSOLE port

PON Port Specification

Transmission Distance 20KM

EPON port speed Symmetrical 1.25Gbps Wavelength TX 1490nm, RX 1310nm Connector SC/PC Fiber Type 9/125μm SMF TX Power +2~+7dBm Rx Sensitivity -27dBm Saturation Optical Power -6dBm

Contd…2





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 -2-

SFP Modules Included 4 downlink PON SFP modules and 1 uplink SFP module included for full capacity and ready to use the OLT

Management Mode SNMP, Telnet and CLI management mode.

Management Function

Fan Group Detecting; Port Status monitoring and configuration management; Layer-2 switch configuration such as VLAN, Trunk, RSTP, IGMP, QOS, etc; EPON management function: DBA,ONU authorization, ACL, QOS, etc; Online ONU configuration and management; User management; Alarm management.

Layer-two Switch

Support port VLAN and protocol VLAN; Support VLAN tag/Un-tag ,VLAN transparent transmission; Support 4096 VLANs; Support IEEE802.3dd trunk; Support RSTP; QOS based on port, VID, TOS and MAC address; IGMP Snooping; IEEE802.x flow control; Port stability statistic and monitoring.

EPON Function

Support port-based rate limitation and bandwidth control; In compliant with IEEE802.3ah standard; Up to 20KM transmission Distance; Support data encryption, multi-cast, port VLAN, separation, RSTP, etc; Support Dynamic Bandwidth Allocation (DBA); Support ONU auto-discovery/link detection/remote upgrade of software; Support VLAN division and user separation to avoid broadcast storm; Support various LLID configuration and single LLID configuration; Different user and different service could provide different QoS by means of different LLID channels; Support power-off alarm function, easy for link problem detection; Support broadcasting storm resistance function; Support port isolation between different ports; Support ACL and SNMP to configure data packet filter flexibly; Specialized design for system breakdown prevention to maintain stable system; Support dynamic distance calculation on EMS online; Support RSTP, IGMP Proxy.

Dimension(L*W*H) 442mm*315mm*44mm Weight 4.2kg 4.5kg

Power Supply 220VAC AC:90~264V, 47/63Hz -48DC DC:-36V~-72V

Power Consumption 45W 48W

Operating Environment

Working Temperature -10~+45 Storage Temperature -40~+85 Relative Humidity 5~90%(non-conditioning)

Contd…3






15. ONU 1 PORT : 1RJ45, 1G OUTPUT, EPON, SM, INBUILT DHCP, NAT EPON-ONU designed for fulfilling FTTH requests, Internet access of SOHO people, renovation request of EPON+EOC infrastructure of cable TV operators and the technology of layer 2 Ethernet switch as well. It must be highly reliable and easy to maintain, with guaranteed QoS. And it has to be fully compliant to technical regulations and technical requirement of EPON Equipment

Following features must be supported;

1. Support IPv4、IPv6 and IPv4/IPv6 dual stack

2. Support DHCP/PPPOE/Static IP

3. Support Static route

4. Support NAT

Other features Plug and play, integrated auto-detecting, auto-configuration, and auto firmware upgrade, etc. Integrated OAM remote configuration and maintenance function. Support rich Q in Q VLAN function and IGMP Snooping multicast feature. Functions like transceiver diagnostic monitoring, transmitter disable, etc. Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.

Technical Specifications for above ONU

Technical items

Descriptions

Upstream PON

interface 1 EPON interface, SC single-mode/single-fiber, symmetric 1.25Gbps

Wavelength Tx 1310nm, Rx 1490nm

Optical interface SC/PC connector

Downstream LAN interface

1x 10/100/1000Mbps auto adaptive Ethernet interface, Full Duplex/Half Duplex, RJ45 connector

Indicators 4 indicators, for status of power, PON port and 1 Giga-Ethernet port.

DC power supply [email protected], external AC-DC power adapter

Power consumption ≤5W

Operating condition Operating temp: -5 - +55℃, operating humidity:10-90%(non-condensed)

Storing condition Storing temp: -30 - +60℃, storing humidity:10-90%(non-condensed)

Contd…4


mailto:[email protected],





16. Router with User Mgt software : carrier grade router with a cutting edge 36 core Tilera CPU. Core support throughput of up to 24 million packets per second, or up to 16 gigabits - full wire speed. 1U rackmount case, four SFP ports, including 1G input SFP module, twelve Gigabit ethernet ports, serial console and USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options. Including user management software.

17. WIFI BASE UNIT : 802.11n, with compatible POE, 30 dbm, 1000mW, enterprise segment. Omni directional antenna for long range coverage (9dbi to 16dbi).

18. WIFI CPE : 802.11n, with compatible POE, 30dbm, 1000mW, enterprise segment with built in 14dbi to 16dbi antenna.

19. Antenna : please refer specifications file 2 20. Antenna : please refer specifications file 2 21. Antenna : please refer specifications file 2 22. GigabitSwitch 24 ports RJ45 : All Gigabit Ethernet ports, enterprise segment 23. Network RACK : 42U 24. OFC cable laying : over head, industry standard 25. OFC fiber Splicing & Termination : industry standard 26. UTP Cable Laying with Casing & Termination: industry standard 27. I/O with fixing & termination : industry standard 28. UPS : with isolation trasformer, online 5 kva, 60 minutes backup, single phase

input & output, Floor mounted type. industry standard 29. Electrification : Standard electric wiring with casing & capping for IT works,

Standard board with 3 nos of 3 pin sockets for ONU, 1 no fuse protection, heavy duty

30. Firewall : Open Source Firewall VPN Router Load Balancer Hardware Appliance with 4GB RAM 64-bit Dual Core Intel 3215U CPU 16GB SSD 4x Intel Gigabit NIC with SATA option with the following features. ◦ Intel Dual Core 3215U 1.7Ghz CPU, 4x Intel Gigabit Ports, 4GB RAM

(supports upto 8GB), 16GB SSD Loaded with pfSense / equivalent software Can also be added 2.5" HDD If intended to use additional packages. RAM

can be upgraded to 8GB Compatible with multiple firewall distributions like sophos, untangle,

ipcop, ipfire, opnsense, etc Can also be used as a standard desktop installation with Ubuntu / CentOS Has USB 3.0 Ports, HDMI port, Serial Port

31. PC for Radius server : ◦ Processor : Intel Core i3-4130 , 3.4 GHz, 3 MB Cache or above ◦ Memory : 8 GB 1600 MHz DDR3 RAM with 32 GB Expandability ◦ Hard Disk Drive : 500 GB 7200 rpm or higher ◦ Optical Drive : 8X or better DVD RW Drive ◦ Chipset : Intel Q8 series ◦ Monitor : 47 cm (18.5 inch) ◦ O/S : Linux

Contd….5






32. Laptop for Network maintenance : ◦ Processor : Intel Core i3- 4005 U ( 1.7 GHz with 3 MB cache)or above ◦ Chipset : Latest Compatible 8 series ◦ Memory : 4 GB 1600 MHz DDR3L/LPDDR3 RAM ◦ HDD : 500 GB, 5400 rpm (min.) SATA ◦ Display : 14"(35.56 cm) or above TFT active Matrix Wide Screen ◦ O/S : Microsoft Windows 8.1 or higher

33. Other Accessories for networking : connectors, cables, any other requirements, etc.

34. Splicing machine : heavy duty, Fujikura, 80S / equivalent , with all standard accessories Core Alignment Fusion Splicer specifications : Applicable fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653),

NZDS (ITU-T G.655),Others Fibre Count Single Cladding diameter 80 to 150μm Coating diameter 100 to 1000μm

Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900

Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS,

0.04dB with NZDS

Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode

Return loss 60dB or greater Splicing modes 100 splicer modes are available

Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate

Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator

Storage of splice result The last 2000 results to be stored in the internal memory

Magnification X / Y (300X magnification), or both X and Y simultaneously (160X magnification)

Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor

Tension test 1.96 to 2.25N Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively

Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference

Tube heat time 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available

Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves

No. of splice/heating with battery 200 times of splicing and heat shrinking under with BTR-09

Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09

Terminals USB2.0 ( Mini-B) for data and video signal transfer to PC Wind protection Up to 15m/s wind velocity

Contd….6






Dimensions 146(W) x 159(D) x 150(H) mm Including wind protector, monitor, and rubber protector Excluding rubber foot

Weight 2.5 kg, with ADC-18 AC adaptor 2.7 kg, with BTR-09 battery

Electrode life 3000 arc-discharges

Standard Package Item Description Qty 1 Fusion Splicer 1 pc 2 AC adaptor/battery charger 1 pc 3 AC power cord 1 pc 4 Spare Electrodes 1 pair 5 Cleaver 1 pc 6 Battery Pack 1 pc 7 USB cable 1 pc 8 Quick reference guide 1 pc 9 Warning and cautions 1 pc 10 Instruction Manual 1 pc 11 Alcohol Pot 1 pc 12 Battery charge cord 1 pc 13 Carrying Case 1 pc 14 Screw Driver 1 pc

35. Laser pen : industry standard 36. Workstation cum Server : please refer specifications file 3 37. Thin Clients: please refer specifications file 3 38. Line Interactive UPS: please refer specifications file 3 39. Switch with inbuilt power supply: please refer specifications file 3 40. Servers: please refer specifications file 3 41. Workstations: please refer specifications file 3 42. Online UPS: please refer specifications file 3 43. Multi Function Device: please refer specifications file 3 44. Live Cannel Video Streaming: please refer specifications file 3 45. Personal Computers i3 : please refer specifications file 3 46. Wifi Router with Access Points : with the following features

Device Interfaces`

IEEE 802.11ac wireless LAN1 IEEE 802.11 a/b/g/n wireless LAN 10/100 fast Ethernet WAN port Four 10/100 fast Ethernet LAN ports

Antenna Three external antennas

Operating Frequency 2.4 GHz band: 2400 - 2483.5 MHz 5 GHz band: 5150 - 5725 MHz

Security WPA & WPA2 (Wi-Fi Protected Access) WPS (Wi-Fi Protected Setup)

Advanced Features

One page setup wizard Traffic Control (QoS) Wireless repeater DMZ (Demilitarized Zone)

Contd…7






-7-

35. Workstation cum Server CPU : Intel (R) Xeon (R) Processor E5-2650 v2/v3, 2.6 GHz 20

MB L3 cache or higher. Or equivalent or higher model Chip set : Intel C 602 chipset or better. Cabinet : Table top model Memory : 8 GB DDR3 1600 Mhz expandable to 256 GB or better. Hard Disk Drive : 2x1000 GB SATA HDD at 7200 rpm upgradeable Bays : Total 4 Bays (2 internal, 2 external) Optical Drive : 8 X DVD writer. Others : Standard keyboard, mouse & LCD display 18.5 inch, accessories Operating System : Microsoft Windows 10 Professional 64 Bit or higher with

license

36. Thin Clients Thin client : Ncomputing L300 or equivalent Networking Ethernet Controller 10/100 Mbps Switched Ethernet LAN Ports 1 x 10/100 Ethernet Expansion Other ports, 2 remote USB 2.0, Microphone jack, Speaker jack, USB

1.1 for keyboard & mouse, VGA monitor, 12V DC in, On / off switch, LEDs :Power, network link, and network activity Power Characteristics : 12VDC power supply included (110/220 auto-switching),

5W Power consumption (independent of external USB devices) Physical Spec : Dimensions 1.20" x 4.50" x 4.50" Weight : 0.34 lb. Features : Supports power-saving mode with VESA-compliant monitors , 12 bit

stereo audio input / output via 3.5mm stereo jacks , All solid-state design, NComputing vSpace Server permits up to 100 users per shared OS

Accessories : Standard Mouse, Keyboard, LCD monitor 18.5 inch, cables etc.

37. LINE INTERACTIVE UPS iBall Nirantar 1KVA UPS-1080V or equivalent with Double battery for extended

backup. Electrifying recharge speed. UPS with 33% faster recharging. Superior reliability, coupled with advanced backup facility.

Capacity - 1000VA / 600W Microprocessor Controlled - Microprocessor controlled to guarantee high

reliability Input Voltage - 230VAC Input Voltage Range - 140-300VAC Input Frequency - 50 Hz Output Voltage - 230VAC Output Voltage Regulation (Batt.) - ±10% Output Frequency Regulation (Batt.) - 50 Hz ±1% Output Waveform - Simulated Sine Wave Battery Type - 12V, 9.0AH x 2 Nos.





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 Recharge Time - 6 hours max. (Recharge to 90% capacity) Transfer Time - 4 - 8 ms. LED Indicator - Green, Yellow and Red LEDs for various indication modes Audible Alarm - Beeper with various beeper modes Full Protection - Discharge, overcharge, and overload protection Power Outlets - 4 Outlets Dimension (D x W x H) - 350 x 146 x 160 mm Net Weight - 8.9 kgs. Operating Environment - 0 - 90 % RH @ 0 - 40°C, (non-condensing) Noise Level - Less than 40dB

38. Network switch with inbuilt power supply 16 ports industry standard

39. UTP cable bundle WITH RJ-45 CONNECTORS (500 Number) Industry standard, heavy duty

40. Servers

HPE ML350 Gen9 Intel Xeon E5-2620v4 (2.1GHz/8-core/20MB/85W) or equivalent

2 x 16GB DDR4-2400 R Memory Open Bay 8 SFF(2.5inch) Hot Plug Drive HP Smart Array P440ar/2G Controller HP SATA 9.5 JB Optical HDWR HPE Embedded 1Gb Ethernet 4-port 331i Adapter HPE iLO (Firmware HPE iLO4 2.0) 2GB NAND 2 x HP 800W FS Plat Ht Plg Pwr Supply Kit 3 Yrs Warranty comprehensive 3/3/3

41. Workstations HP Z238 Microtower Workstation or equivalent Intel® Core™ i7-6700 Processor 8GB DDR4 RAM / 1TB HDD Intel® HD Graphics 530 HP 3/3/3 Tower Warranty-SG Standard DVD writer, LED Monitor 18.5 inch, mouse, key board, accessories Operating Syatem : Windows 10 Professional

42. ONLINE UPS On-Line UPS with isolation transformer suitable for Three Phase AC Input and Single Phase AC Output, Floor Mounted Type On-line UPS with isolation transformer & with PWM technology, Floor mounted type suitable for three-phase AC input voltage 300V to 450V, 50 +/-1.5 Hz and single phase AC output voltage 230 +/- 1%V,50+/-0.5Hz. It shall be housed in rugged enclosure made of M.S sheet 1.2 mm (minimum) thick, aesthetically finished, duly pretreated and powder coated. a. UPS shall be free from workmanship defects, sharp edges, nicks, scratches, burs, etc. All fasteners shall be fixed properly. The equipment shall be complete with all parts and all parts shall be functional. b. UPS Enclosure's Degree of Protection shall be IP2L1 c. Manual by-pass facility shall be provided for maintenance of UPS. d. UPS shall supply output power and charging current at the same time.





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 e. Switching device shall be MOSFET or IGBT and the same shall be confirmed in the offer. f. Switching frequency shall be above 10 KHz or Switching frequency shall be above 20 KHz (for On Line UPS without Isolation transformer suitable for single phase AC input & single AC 55/41 output, Floor Mounted Type)Switching frequency shall be declared in the offer. g. KW rating of the UPS shall be 0.7 times the KVA rating or KW rating of the UPS shall be 0.8 times the KVA rating (for On Line UPS without Isolation transformer suitable for single phase AC input & single AC output, Floor Mounted Type) 2. Input a. 300V-450V, 50 +/-3%Hz three phase AC 3. Output (as applicable) a. 230V +/-1% (with alternative setting for 220V +/-1%) 50 +/-0.5Hz, single phase. 4. Total harmonics distortion at output : 2% maximum for UPS up to 5KVA and 3% maximum for UPS above 5 KVA on resistive load (when the total input harmonics are less than or equal to 10%). 5. Efficiency (at rated output KVA Rating, rated Pf, rated voltage and frequency) a. Overall efficiency (minimum): 90% or Overall efficiency (minimum): 90% for ratings 1kva, 2kva &3kva and 92% for ratings 5kva, 6kva, 7.5kva & 10kva (for On Line UPS without Isolation transformer suitable for single phase AC input & single AC output, Floor Mounted Type) 6. UPS input power factor at rated load: Better than 0.90 lagging at input side or Better than 0.95 lagging at input side (for On Line UPS without Isolation transformer suitable for single phase AC input & single AC output, Floor Mounted Type) 7. Over load: UPS shall withstand 20% overload for 10 minutes and 50% Over load for one minute. 8. Protections: Following protection shall be provided in UPS: a. Over voltage, short circuit, and overload at UPS output terminal. b. Under voltage at battery terminal. c. Over shoot and under shoot shall not be greater than 4% of rated voltage for duration of 40m sec. (maximum).(over shoot is the abrupt increase of out put voltage when the out put load is changed from fullload to no- load. Similarly under shoot is the abrupt decrease of out put voltage when the out put load is changed from no-load to full load). 9. Indicators and meters a. Following indicators shall be provided:- (i) Mains presence. (ii) Battery charging and discharging (iii)Output overload (iv) Low battery voltage. b. Digital meter shall be provided for monitoring the following parameters in UPS(not applicable for rack mounting): 56/41 (i) Input AC voltage. (ii) Output AC Voltage, current and frequency (iii)Battery voltage and current. 10. Battery bank: a. UPS shall be supplied with TUBULAR BATTERIES WITH DEEP DISCHARGE, with minimum 6 Hours battery backup on full load

43. Multi Function Device with colour Standard all in one MFD with colour





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 44. Live Channel Video streaming

Out Broadcast Software switcher with plugins AV cables, HDMI cables, switcher cables, VGA cables, Capture cables, ox cables

45. Personal computers i3

◦ Processor : Intel Core i3-4130 , 3.4 GHz, 3 MB Cache or above ◦ Memory : 8 GB 1600 MHz DDR3 RAM with 32 GB Expandability ◦ Hard Disk Drive : 500 GB 7200 rpm or higher ◦ Optical Drive : 8X or better DVD RW Drive ◦ Chipset : Intel Q8 series ◦ Monitor : 47 cm (18.5 inch) ◦ O/S : Windows 10 professional or latest

19. ANTENNA, OMNI, MIMO-2.4GHz-OMNI-MIMO-13dBi or higher capacity

Applications:

2.4GHz-2.5GHz ISM Band IEEE 802.11b, 802.11g, 802.11n Wireless LAN Directional and multipoint applications Bluetooth、WiFi, RFID Public Wireless Hotspot Wireless Video Systems

Features:

Superior Performance The Weight is light Good appearance designs Installed for vertical or horizontal polarization Outdoor antenna for public Hot spots Heavy Duty mounting RoHS Compliant To increase the range and reliability of wireless links antennas also feature rugged, weatherized construction making them well suited for both indoor and outdoor applications The antenna includes complete mounting hardware for standard masts

Electrical Specifications Model Standard Frequency Range 2400-2483MHz Band width 100MHz Gain 13dBi Horizontal Beam width 360° Vertical Beam width 10.5° V.S.W.R ≤1.5 Radiation Omni-Mimo Polarization Vertical Maximum Input Power 50W





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 Impedance 50Ώ Operating Temperature -40 to+70 Connector Dual-N Female Mount way Pole Mechanical Specifications Antenna Dimension Φ80x890mm Weight 1.8 Kg Rated Wind Velocity 60m/s 20. ANTENNA, DIRECTIONAL : combined high gain with wide 120°beamwidth, professional quality "cell site" antenna designed for service providers in 2.4GHz band. WISP base sector antenna. N type connector antenna,

● Wide 120° Horizontal Beam width

● IP66 Waterproof Level

● UV Protected and Durable Fiberglass Radom

● RoHS Compliant

Electrical Model Standard Frequency Range 2400-2483MHz Gain 16 dBi VSWR ≤1.5 3dB Beam-Width, H-Plane 120° 3dB Beam-Width, E-Plane 7.5° Polarization Vertical Upper Side Lobes dB Front to Back Ratio ≥25 dB Maximum Input Power 100 Watt Impedance 50 Ω Lightning Protection DC Grounded Mechanical Connector N Female Antenna Dimension 900×160×70 mm Weight 4.5 KG Radome Material Fiberglass Mounting Mast Diameter Ø40~Ø60 mm Operating Temperature -40° C to +65° C Rated Wind Velocity 216 Km/h





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 21. ANTENNA OMNI :-2.4GHz-OMNI-15dBi or higher capacity

Applications:

2.4GHz-2.5GHz 09dBi ISM Band IEEE 802.11b, 802.11g, 802.11n Wireless LAN Directional and multipoint applications Bluetooth、WiFi, RFID Public Wireless Hotspot Wireless Video Systems

Features:

Superior Performance The Weight is light Good appearance designs Installed for vertical or horizontal polarization Outdoor antenna for public Hot spots Heavy Duty mounting RoHS Compliant To increase the range and reliability of wireless links antennas also feature rugged, weatherized construction making them well suited for both indoor and outdoor applications The antenna includes complete mounting hardware for standard masts

Electrical Specifications Model standard Frequency Range 2400-2483MHz Band width 83MHz Gain 15dBi Horizontal Beam width 360° Vertical Beam width 10.5° V.S.W.R ≤1.5 Radiation Omni Polarization Vertical Maximum Input Power 50W Impedance 50Ώ Operating Temperature -40℃ to+70℃ Connector N Female Mount way Pole Mechanical Specifications Antenna Dimension Φ20x1500mm Weight 850g Rated Wind Velocity 60m/s






Interested parties may download the tender form from the web-site:

https://www.eproc.karnataka.gov.in Tender should be through e-portal only. Tender

processing fees as per e-portal and EMD amount to be remitted through e-procurement

mode. Parties must mention make & model no. with detailed specification of the Audio

Video Equipments offered by them (on separate sheet). Otherwise their tender will not be

accepted. The tender document should consist of two parts “technical bid” and "financial

bid”.

Schedule of the Tender 1. Last Date and Time of receipt of tender -03-2017 at 14.00 hrs 2. Date of Technical bid opening: -03-2017 at 16.00 hrs 3. Date and time of financial bid opening: -03-2017 at 16.00 hrs

REGISTRAR, K. U. Dharwad


https://www.eproc.karnataka.gov.in




Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 TENDER FOR SUPPLY, INSTALLATION INTEGRATION & DEMONSTRATION OF LOCAL ACCESS NETWORK ITEMS AT KARNATAKA UNIVERSITY, DHARWAD

SCOPE OF WORK : SUPPLY, INSTALLATION, INTEGRATION & DEMONSTRATION OF LOCAL ACCESS NETWORK ITEMS AS PER TENDERS CALLED WITH SPECEFIC TITLES

ELIGIBILITY CRITERIA FOR PARTICIPATING IN THE TENDER

(Valid & Upto date Documentary Evidence to be enclosed point wise)

1. The bidder should be a licensed dealer of the product. Manufacturers’ Authorization Form (MAF) shall be furnished in the technical bid.

2. Karnatak University will not deal with any entity other than the authorized bidder, whatsoever the nature of its relation with the bidder.

3. Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

4. Technical Bid: The Technical bid should be complete in all respects and contain all information about the Lab Equipments as specified in annexure1 of this document. It should not contain any price information. However it should confirm that all required rates have been quoted in Commercial Offer (CO), without showing the actual amounts in the Technical Bid. It is mandatory to submit all the details in the prescribed formats duly filled in, along with the offer. KUD at its discretion, may not evaluate a technical bid in case of non- submission or partial submission of technical details. The technical bid must be submitted by bidder to KUD in an organized and structured manner.

5. The Bidder who is ready to Supply, Install, Integrate and Demonstrate all sub components for LOCAL ACCESS NETWORK ITEMS setup as per Technical Specifications can only participate. University may not consider / reject such of the tenders which are NOT quoted for all the items as it may not be the total end to end integrated solution.

6. Bidder shall ensure that the proposed SUPPLY, INSTALLATION & DEMONSTRATION OF LOCAL ACCESS NETWORK ITEMS System is compatible and should be integrated with standard SUPPLY, INSTALLATION & DEMONSTRATION OF LOCAL ACCESS NETWORK ITEMS

7. The bidder shall agree to operate a pilot project to demonstrate the full operation of the proposed SUPPLY, INSTALLATION & DEMONSTRATION OF LOCAL ACCESS NETWORK ITEMS system in KUD.

8. The bidder shall agree towards local customization and personalization on all aspects of the proposed system during the implementation and warranty period free of cost so as to ensure a smooth functioning and user friendly environment.

9. Copy of latest Income Tax Clearance Certificate and PAN Card should also be enclosed.

10. The registration number of the bidder along with the CST Number & TIN Number allotted by the Sales Tax Authorities must be given in the tender bid. (Enclose necessary documents).

11. The bidder should fill the complete details in the technical bid format and should be submitted in the company letter head with contact details.





Ref. No.: KU/PMEB/RUSA/KMJ/2016-17/544 Date: 1-3-2017 12. Bidder should provide comprehensive onsite warranty for 3 years from the date of

supply of Lab Equipments.

13. Installation and commissioning should be done within 15 days of delivery.

14. In case of any operational problem, the bidder should be able to resolve the problem within shortest possible time.

15. Educational offer (if any) is to be provided.

16. Annual turnover, VAT registration certificate, PAN card, Authorization letter of the bidder should be provided.

17. Every year Financial Transaction must be above 1 Crore for the last 3 years.

18. A declaration for having not been disqualified / black listed / suspended from empanelment or from participation in any tender from Government or Quasi Government agency in the union of India.

19. The manufacturer Quality Control Certificate should be accompanied with the final products.

20. Quoted amount in the tender should include all applicable taxes, transport charges, installation charges and warranty. The net rate quoted per unit in respect of indigenous goods shall be for F.O.R. Destination, which should include all taxes, VAT, insurance, freight charges etc.

21. EMD details submitted through e-Procurement portal. The Suppliers submitting e-Tenders and depositing the Earnest Money shall be deemed to have undertaken to keep the tender open for acceptance for the full period of 120 days from the date of acceptance of rates and will not have any right to withdraw the same before the expiry of the said period.

22. EMD amount of selected bidder will be withheld for the period of one year from the supply of items, as a security for the performance of supplied goods. The same amount will be refunded without interest after the completion of one year.

23. The bidders may please note that, the university has the discretion to withdraw any or all the items invited under the subject notification at any time before issuing the supply order.

24. Non-compliance by the bidder to any of the conditions will entail forfeiture of EMD and rejection of tender.

25. All the pages of the bid should be signed along with company’s seal.

26. In case of any dispute arising out of this contract, the decision of the Vice Chancellor is final. Sd/- REGISTRAR K. U. Dharwad


Documents

KARNATAK UNIVERSITY, DHARWAD University with · PDF fileKARNATAK UNIVERSITY, DHARWAD University with Potential for Excellence PLANNING, MONITORING & EVALUATION BOARD ... Core Alignment