Upload
dinhtruc
View
226
Download
4
Embed Size (px)
Citation preview
Küba Blue Line Air Coolers
Küba SF blastfreezer
THE SOLUTION FOR BLAST CHILLING
10 kW - 70 kW
15 kW - 124 kW
–
–
⊲ For blast cooling and freezing meat of sausage products, baked goods, pizza and vegetables, the Küba SF blastfreezer is the specialist.
⊲ Blow-through fans achieve optimal air speed.⊲ Large fin spacings guarantee a rapid cooling procedure.⊲ This results in long evaporator up times.⊲ With adjustable floor brackets, the SF blastfreezer can be
perfectly adapted to on site conditions.⊲ Flow optimised through precise matching of fans and heat exchangers⊲ Improved distribution of air in the heat exchanger.⊲ Integrated full bell mouth.⊲ ERP 2015 compliant.⊲ Smaller depth: enables you to make the most of the space available.
CAPACITY RANGEAPPLICATION & BENEFITS
tL1= 0°C | t0= -8°C | DT1 = 8K | R404A [SC2]
tL1= 0°C | t0= -8°C | DT1 = 8K | R744 | 45/60 bar
⊲ Hinged Fans
⊲ Side cover hoods
⊲ Tube System: Aligned
⊲ Tube spacing: 50 x 50 mm | Ø 15 mm
⊲ Fin spacing: [in mm]
B = 7.0 | K = 10.0 | L = 12.0
⊲ Single/Multiple injection via Küba CAL® Distributor
Kelvion Refrigeration GmbHKühler Weg 1, 82065 Baierbrunn, GermanyTel +49 (0) 89 / 744 73 - [email protected] ©
Kel
vio
n R
efri
ger
atio
n G
mb
H •
All
rig
hts
rese
rved
• 0
7/16
⊲ AC Technology þ⊲ EC Technology ü⊲ Rapid Cooling ü
1,813
836 SF 56 = 1,210 | 2,010 | 2,810 | 3,610
MATERIAL TUBE FINS CASING END PLATE
Aluminum þ þCopper þAluminum epoxy-resin-coated ü
Aluminum/Steel protective coating ü ü
Steel sendzimir zinc-plated þStainless Steel ü ü ü
With our product selection
software Kelvion Select,
you can configure our
products and spare parts
easily and very detailed
for your customer.
Reliable support during
the project planning
phase and time savings
by means of a detailed
selection is guaranteed.
HEAT EXCHANGER
VARIANTS & ACCESSORIES
NOTE
AIR DIRECTION & DIMENSIONS [in mm]
DEFROST
MATERIAL
FANS
Ø 560 mm
DEFROST COIL DRIP TRAY
Electric ü ü
Hot Gas ü ü
Cold Gas ü
Brine ü
þ Standard execution | ü Available as a variant | ü« Standard for NH3
Casing and Heat Exchanger powder coated (RAL 9010)