2 in 1 Four Man Instant Pop Up Tent / ShelterKDTNT4PPOPA

Quick Start Guide

Remove the tent and all accessories from the package. Open the tent and then lay items all out on the floor.

Assemble the fibre-glass poles of the inner tent. It is essential that each pole section is fully inserted into the adjoining metal ferrule.

The two longest poles run diagonally across the top of the tent. To achieve this, thread the poles through thehooks on the inner tent, then press the end of each pole through the retaining pin on the bottom corners.This will create the arc of the tent.

Take out the pop-up fly tent frame with the shelter fabric and remove the floor cap.

To open the pop-up frame, hold the rod joints of the frame head and push the adjustable switch forward slowly.

Now that you understand how the two sections are assembled, you can assemble both the tent and pop-up frame together as shown below.

As shown in the final image, the pegs should then be secured to the ground to keep the tent secure.

To disassemble the tent, simply reverse all of the assembly instructions. If the tent is wet, allow it to dry thoroughly before storing it in the carry bag.Pack the tent away into the carry bag as shown below.

If you have any further queries or questions, please contact the Kogan customer support team.