KERCKHAERT HORSESHOES AMERICAN SERIES » STEEL...Pride Sliding Plates 1/4" x 1" Pride Sliding Plates 1/4" x 1-1/4" Aslightly wider version of the Pride Sliding Plates.Also tapered

The Standard Pony shoes have a very niceshape for ponies and even fit some miniatures.Shoes are symmetrical.

Punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

Standard Pony

A wide-web pattern designed to giveprotection and support - especially inrough terrain. Features include bevelon ground side, sole relief and slighttapering of heels. V-crease allows forbetter nail fit. Shoes are symmetrical.

Punched for 5 City or 5 Slim.

Standard Extra

One Shape - Unclipped - 8x0, 6x0, 4x0 (all 16x6)

One Shape - Unclipped - 00, 0, 1, 2, 3

1

AMERICAN SERIES » STEELKERCKHAERT HORSESHOES

Quality in a one shapepattern (no front or hind).The placement of the nails ina V-shaped crease allows youto nail with confidence,knowing the integrity of thehoof will not becompromised. Fuller toe,inside bevel, sole relief andslight taper to heel area. The pricing of the Standard is verycompetitive, the quality is unsurpassed. Shoes are symmetrical.Now available with sole relief.


Standard

One Shape - Unclipped - 00 (18x8), 0 (19x8), 1 (19x8), 2 (20x8), 3 (20x8)

Now With Sole

Relief

Same quality as the well-known Standard Series shoe, theStandard Lite is a lighter version with 18x7 steel size.This shoe has the same features as the Standard: one shapepattern and V-shaped crease. Fuller toe, inside bevel and slighttaper to heel area. This is an attractive, economical series forhorses that require a lighter shoe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, dependingon size.

Standard Lite

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

The Standard Rim offersfeatures that satisfy thedemands of the market.The one shape pattern(no front or hind) isversatile and can beeasily shaped to fit frontor hind - but doesn’thave the pointed toeshape of other brandsthat makes fitting difficult. The bevels on the inside and outsideoffer good breakover and grip in arena surfaces as well as trailsand cross-country terrain. The full crease from heel to heel offersmaximum traction. V-Crease ensures better nail fit. Fuller toe,inside bevel, and slight taper to heel area. Shoes are symmetrical.

Punched for 5 City, 5 Race or 5 Slim.

With features similarto the Classic Roller,this shoe is anexcellent choice forhorses needingadditional ease ofbreakover, whetherfor movement in performance, or simply more comfort because ofinjuries or chronic ailments. While this half round style boastsmore ground surface than a true half round, it allows the ease ofbreakover half round shoes are noted for. The crease gives tractionwhile not taking away from the rollover effect of the shoe.


SX RollerUnclipped

Front - Unclipped - 00, 0, 1, 2 (all 20x9)

NEW!

Standard Rim

A one shape pattern with the same weight as the popular SX-7series, this is an ideal shoe for the Quarter Horse invarious disciplines, including roping, barrels and other timedevents. The shoes are easily fit to front or hind andthe punching helps maintain the integrity of the hoof. V-Creaseensures better nail fit. Fuller toe, inside bevel, and slight taper toheel area. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, dependingon size.

AMERICAN SERIES » STEEL

2

KERCKHAERT HORSESHOES

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

One Shape - Unclipped - 0, 1, 2

Standard Lite Rim

Now With V-Crease

3


The first Kerckhaert shoe designedspecifically for the North Americanmarket. These light, strong shoes areamong the most popular in the line.Used for a wide variety of disciplines,these 1/4" shoes allow good nailing andfit without adding excess weight. Shoesare symmetrical. Sole relief nowavailable on fronts.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

SX-7 Unclipped

The best light, clipped shoe on the market. The front pattern isquarter clipped and the hinds come with side clips. Because lightshoes are often the most difficult to clip, you’ll find these are anexcellent option. Strong clips on well made shoes with sole relief.Toe area is slightly wider to provide strength and wear. Shoes aresymmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

SX-7 Clipped

Front – Unclipped – 4x0, 000, 00, 0, 1, 2 (all 18x7)

Hind – Unclipped - 4x0, 000, 00, 0, 1, 2 (all 18x7)

Front - Quarter Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7)

Hind - Side Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7)

(Front)

(Hind)

Fronts Now WithSole Relief

(Hind)

4


Efficiency is the name of the game. These shoes have a strong clipfrom top to bottom; quarter clip fronts, side clips behind. Becausethe clip is not drawn from the web of the shoe, the integrity of thenail holes and shoe strength is protected. Toe area is slightly widerto provide strength and wear. Front shoes have sole relief. Shoesare symmetrical.


SX-8 Clipped

Front - Quarter Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8)

Hind - Side Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8)

(Front)

(Hind)

Demand for shoes punched for City headnails brought forth the SX Series. TheSX-8 is a 5/16" thick shoe withgraduated widths. These shoes are usedfor trail, jumping, dressage and ranchwork. Shoes are symmetrical. Solerelief now available on fronts.


SX-8 Unclipped

Fronts Now WithSole Relief

Front - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

Hind - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

(Hind)

5


The Triumph steel series is considered the premier shoe for avariety of disciplines, including event horses, cross-country andvarious rodeo applications. Slightly thicker steel for betterwear and durability. The broad toe of the front pattern allowsfor excellent fit and breakover, but still maintains the necessary“purchase" to allow the horse to move forward with confidence.The hind pattern has the excellent features of the Kerckhaertshape that makes fitting much easier. With bevels inside andout, sole relief and good heel support - this series is a dreamshoe for the athlete. Shoes are symmetrical.


Steel Triumph Unclipped

The clipped version of Kerckhaert's popular Steel Triumph offers allof the great features you’ve come to love about the Steel Triumph- and the clips provide additional security and less stress on thenails. Quarter clipped fronts; side clipped hinds. Shoes aresymmetrical.


Steel Triumph Clipped

Front - Unclipped - 00, 0, 1, 2, 3

Hind - Unclipped - 00, 0, 1, 2, 3

Front - Quarter Clipped - 00, 0, 1, 2, 3

Hind - Side Clipped - 00, 0, 1, 2, 3

6


This series is designed specifically for the Quarter Horse and otherbreeds that don’t require heavy steel for good performance. Thefront shape is slightly narrower than the regular Triumph series andmakes fitting of the shoe much easier. With the lighter section ofsteel, this series has quickly become a favorite of performancehorses in the ring and out. Boxed heels and sole relief. Shoes aresymmetrical.

Punched for 4-1-2 Regular, 5 Race, 5 City or 5 Slim, depending onsize.

Steel Triumph Lite Unclipped

The clipped version of Kerckhaert's Triumph Lite offers all of thegreat features of the Steel Triumph Lite and the clips provideadditional security and less stress on the nails. Quarter clippedfronts; side clipped hinds. Boxed heels and sole relief. Shoes aresymmetrical.

Punched for 4-1-2 Regular, 5 Race, 5 City or 5 Slim, depending onsize.

Steel Triumph Lite Clipped

Front - Unclipped - 000, 00, 0, 1

Hind - Unclipped - 000, 00, 0, 1

Front - Quarter Clipped - 000, 00, 0, 1

Hind - Side Clipped - 000, 00, 0, 1

7


The Pride Fine series of sliding plates offers achoice for the farrier that prefers a finerpunching pattern. The series is available in a1/4" x 1" stock size, with a very slight taper inthe heel area. The nail pattern works best for ashoe fit that is very close to a perim eter fit,where the shoe is not set forward.

Pride Fine Sliding Plates 1/4" x 1"

Kerckhaert has introduced a new level of qualityto the reining and rope horse market with theproduction of the Pride series of sliding plates.Slight taper to 7/8". Excellent heel finish on allmodels. Made with higher carbon steel. Shoesare symmetrical.

All Pride Series shoes are punched precisely for 4-1/2 Race, 4-1/2Race XS, 4-1/2 Slim or 5 Special and require little filing to reducethe head of the nail. All Pride Series shoes are symmetrical.

Pride Sliding Plates 1/4" x 1"

Pride Sliding Plates1/4" x 1-1/4"A slightly wider version of the Pride SlidingPlates. Also tapered to 7/8".

Hind - Punched or Blank - 11, 12, 13

Hind - Punched or Blank - 11, 12, 13

Hind - Punched Only - 10, 11, 12

Versatility in a one shape pattern (no front orhind) best describes this flat shoe fromKerckhaert. Ideal for use with young ropinghorses and training for sliding horses. Alsouseful for other disciplines where a light, plainstamped shoe is required. No crease.

Pride 1/4” x 3/4”

One Shape - Punched Only - 00, 0, 1, 2

Pride Sliding Plates1/4" x 7/8"Excellent option for reining and roping horses, especially younger horses. High quality steel provides durability andstrength.

Hind - Punched Only - 10, 11, 12

8


These smaller draft shoes are often used on Haflingers, carriagehorses and even Friesians in North America. This is a strong shoethat gives good wear. 1/2" x 1-1/8"

Punched for Liberty E-7 Slim.

Front and Hind - Toe Clipped - 3, 4

Draft Series 28x12 Clipped

Front and Hind - Unclipped - 5, 6, 7, 8

Responding to the North American market’s demand for lightershoes without clips, Kerckhaert revived the unclipped 3/8" x 1-1/8" series. The shapes correspond to the natural shape of thedraft horse. Shoes are symmetrical.

Punched for 7 or 8 Regular head.

Draft Series 28x10 Unclipped

Front and Hind - Toe Clipped - 5, 6, 7, 8

It’s a tradition to toeclip front and hindshoes for theworkhorse to preventthe shoes from beingdriven back duringwork in the fields oron the streets.Kerckhaert provides astrong clip to makesure the job is done well. These 3/8" x 1-1/8" shoes are symmetrical.

Punched for 7 or 8 Regular head.

Draft Series 28x10 Clipped

Draft Series 32x12 ClippedThe most demanding of environments won’t overwork theseshoes. Anytime the work your horses are asked to do involvesrough terrain, this is your most likely choice. Logging, packing,or whatever you are doing, these shoes have the strength to holdup and protect the hoof. 1/2" x 1-1/4"

Punched for E-8, E-9 or E-10, depending on size.

Front and Hind - Toe Clipped - 5, 6, 7, 8

9


Width Length FIAInches Inches Inches

STANDARD8x0 3-1/2 3-1/2 9-1/26x0 3-3/4 3-7/8 10-1/44x0 4-1/8 4-1/8 11000 4-3/8 4-1/2 11-7/800 4-5/8 4-3/4 12-1/20 4-7/8 5 13-1/41 5 5-1/8 13-5/82 5-1/4 5-3/8 14-3/83 5-1/2 5-3/4 15-1/4

SX-7, SX-8 & SX ROLLERFront4x0 4-3/8 4-3/8 11-3/4000 4-5/8 4-1/2 12-1/400 4-7/8 4-3/4 12-7/80 5 5-1/8 13-1/21 5-1/4 5-1/4 14-1/82 5-1/2 5-3/8 14-5/83 6 5-7/8 15-7/84 6-1/8 6-1/8 16-5/8Hind4x0 4-1/4 4-3/8 11-3/4000 4-3/8 4-1/2 1200 4-5/8 4-3/4 12-1/20 4-7/8 5 13-1/81 5 5-1/8 13-3/42 5-1/4 5-3/8 14-3/83 5-5/8 5-3/4 15-3/84 6 6-1/8 16-1/4

SLIDING PLATES10 3-7/8 4-3/4 1211 4-1/8 5-1/4 1312 4-1/4 5-3/4 14-1/413 4-3/4 6-1/4 15

10



DRAFTFront3 6-1/8 5-7/8 16-1/44 6-3/8 6-1/4 175 6-7/8 6-5/8 18-1/26 7-1/8 7-1/8 19-1/87 7-1/2 7-3/8 208 7-7/8 7-5/8 21Hind3 5-7/8 5-7/8 15-1/24 6-1/8 6-1/4 16-1/25 6-5/8 6-1/2 17-7/86 7 7 18-3/47 7-1/4 7-3/8 19-5/88 7-1/2 7-5/8 20-1/2

STEEL TRIUMPH AND TRIUMPH LITEFront000 4-5/8 4-5/8 12-1/200 4-7/8 4-7/8 130 5 5 13-3/41 5-1/4 5-1/4 14-1/22 5-1/2 5-5/8 153 5-3/4 5-3/4 15-3/4Hind000 4-3/8 4-1/2 1200 4-5/8 4-3/4 12-5/80 4-7/8 5 13-1/41 5-1/8 5-1/4 14-3/82 5-3/8 5-1/2 14-7/83 5-5/8 5-3/4 15-1/2

FIANUMBERMEASUREMENTHEEL TO HEEL

< Width >

<Le

ngth

>

11

EUROPEAN SERIES » STEELKERCKHAERT HORSESHOES

Specifically designed for the hunter jumpermarket where additional support is required.Heels are elongated and tapered. Widestpart of shoe is moved forward, allowing an“extended” heel fit.

Punched for E-head.

The DF series of shoes is a Europeanline of shoes. This line has becomevery popular in recent years. Madefor the discerning farrier whorequires finesse and attention todetail in his work. The DF lineoffers the broadest selection infeatures such as fronts and hinds, left andright foot patterns, different web sizes, clip positioning and nail holesizing according to the size of the shoe.

Punched for E-head.

DF

8 mm - Front Toe Clipped - 5x0 (20x8), 4x0 (20x8), 000 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1(20x8, 22x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8)8 mm - Hind Side Clipped - 4x0 (20x8), 0 00 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1 (20x8, 22x8 & 25x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8)10 mm - Front Toe Clipped - 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10)

10 mm - Hind Side Clipped - 0 (20x10), 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10)

The front shape DF shoes with quarterclips are the fastest growing style in the Aclass Jumper circuit. The variety of steelsizes, combined with the excellent clipstyle and punching, has helped leadKerckhaert to the top in this segment ofthe market. Now available in 8 mm and 10mm thickness. Shoes are symmetrical.

Punched for E-head.

DF Quarter Clipped

8 mm - Front Quarter Clipped - 00 (19x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (24x8), 4 (25x8), 5 (25x8)

10 mm - Front Quarter Clipped - 1 (22x10), 2 (22x10), 3 (22x10), 4 (22x10), 5 (25x10), 6 (25x10)

DF Select

8 mm - Hind Side Clipped - 0 & 1 (20x8), 2 & 3 (22x8)

10 mm – Hind Side Clipped – 1 (21x10), 2, 3 & 4 (22x10)

12


The new Steel Comfort meets the demands of farrierslooking for a high quality shoe thataids in breakover. Key designfeatures include - rolled toe andbranches, better breakover improvescoordination of movement,optimizes balance, less pressure onthe tendons. Built-in sole relief.

Punched for Liberty E-4 Slim and 5 Combo.

Steel Comfort

Front - Side Clipped - 00, 0, 1, 2, 3 (Size 4 av ailable Spring 2012)

This is a special hind shoe with awider outside branch to giveadditional support in the heel area.Especially designed for the hunterjumper market.

Punched for E-head.

DF Grand Prix

8 mm - Hind Side Clipped - 0 (20x8), 1 (22x8), 2 (22x8), 3(24x8), 4 (25x8)

The Meister is wider at the toe andin the heel area where the footneeds the most support, thebranches are narrower so that theyare more easily modified. TheKerckhaert Meister is a seriesdesigned and made for the Germanmarket; therefore, the sizing is different. Thenumber on the Meister shoe is two sizes largerthan normal Kerckhaert sizing for riding shoes.In addition, the mark on the Meister shoe is a"D" instead of the "K" you find on the regularKerckhaert shoe. Meister Fronts are symmetrical.

Punched for E-head.

Meister Hufeisen

8 mm - Front Quarter Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8)

8 mm - Hind Side Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8)

10 mm - Front Quarter Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10)

10 mm - Hind Side Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10)

Meister Sizing » 0 1 2 3 4 5 6 7

Kerckhaert Sizing » 000 00 0 1 2 3 4 5

13


This half round style actually boasts more ground surface than atrue half round but you get the full benefit of ease of break-overthat half round shoes are noted for. The full shape of the frontpattern allows for easy fitting. The width of the sections gives agreat base of support. Available in quarter clipped or toe clippedfront, side clipped hind. Classic Roller Fronts are symmetrical.

Punched for E-head.

Classic Roller Clipped

Many horses in the market have strong walls and don’t require theuse of clips. The unclipped Classic Fast Break complements theclipped series with the same great breakover features. The wideroverall shape of this shoe is an excellent choice for horses thatneed additional ease of breakover for either movement inperformance or simply for more comfort because of injuries orchronic ailments.

Punched for E-head.

Classic Fast Break (Roller) Unclipped

Front - Quarter Clipped - 00 (20x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (22x8 & 24x8), 4 (24x8)

Front - Toe Clipped - 1 (22x8), 2 (22x8), 3 (24x8)

Hind - Side Clipped - 0, 1, 2 (all 22x8), 3 (24x8)

Front - Unclipped - 0 (22x8), 1 (22x8), 2 (24x8)

14


Kerckhaert offers an excellent selection of concave shoes. Theshapes and punching of Kerckhaert result in a premium concaveshoe. The Concave series also boasts the innovative radius clipsfound on many of the other Kerckhaert series. Quarter and toeclipped fronts and side clipped hinds.

Punched for E-head.

Concave Clipped

Front Quarter Clipped – 0 (20x10), 1 (20x10 & 22x10), 2 (2 2x10),3 (22x10)

Front Toe Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11)

Hind Side Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11)

Kerckhaert has addressed the problem many farriers run into with thewarm blood influence in the market. Sizes 6 & 7 fill a much neededgap in shoe size selection in the market. Creased through the toe,with an inner bevel and solid heels, this shoe series provides anexcellent choice for the larger riding horse. Century Big FootFronts are symmetrical.

Punched for E-head.

11 mm - Front Toe Clipped - 4, 5 (all 25x11)

11 mm - Hind Side Clipped - 4, 5 (all 25x11)

12 mm - Front Toe Clipped - 6, 7 (all 28x12)

12 mm - Hind Side Clipped - 6, 7 (all 28x12)

Century Big Foot

15


The original unclipped style, most popular on the hunter jumper circuit.A broad choice of steel sizes, made in front and hind patterns - left andright, makes this an extremely versatile series.

Punched for E-head.

SSP Unclipped

8 mm - Front Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8), 0 (20x8), 1(20x8 & 22x8), 2 (22x8), 3 ( 22x8)

8 mm - Hind Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8) , 0 (19x8& 20x8), 1 (20x8 & 22x8), 2 (20x8 & 22x8), 3 (22x8)

10 mm - Front Unclipped - 1, 2, 3, 4, 5 (all 22x10)

10 mm - Hind Unclipped - 1, 2, 3, 4, 5 (all 22x10)

The SN series continues to be one of the most popular shoes in theKerckhaert line in Europe due to it's versatility. Toe clipped front,side clipped hind. Shoes are symmetrical.

Punched for E-head.

SN Clipped

10 mm - Front Toe Clipped - 3 (22x10 & 25x10), 4 (25x10), 5 (25x10)10 mm - Hind Side Clipped - 2 (22x10), 3 (22x10), 4 (25x10), 5 (25x10)

16



EUROPEANFront5x0 4-1/4 4-1/8 11-3/84x0 4-3/8 4-3/8 11-3/4000 4-5/8 4-1/2 12-3/800 5 4-3/4 130 5-1/4 5 13-5/81 5-3/8 5-1/4 14-1/42 5-5/8 5-1/2 15-1/43 6 6 16-1/44 6-1/4 6-1/4 16-7/85 6-5/8 6-3/8 17-3/46 7-1/8 7 18-1/47 7-3/8 7-1/4 20Hind5x0 4-1/8 4-1/8 11-1/44x0 4-1/4 4-3/8 11-1/2000 4-1/2 4-1/2 11-7/800 4-3/4 4-3/4 12-1/20 5 5 13-1/41 5-1/8 5-1/4 13-3/42 5-1/2 5-1/2 14-3/43 5-3/4 5-7/8 15-1/24 6-1/8 6-1/4 16-1/45 6-3/8 6-1/2 17-1/46 6-7/8 7 18-3/47 7-1/8 7-3/8 19-1/2

0 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

INCHES TO MILLIMETER COMPARISON CHARTScale 3 times actual size

Inch

Millimeter

17

STANDARDBREDKERCKHAERT HORSESHOES

We refer to this shape as the Standardbred because of its narrower,longer shape that is very typical of the Standardbred front foot.This aluminum shoe is proving to be a tough, good wearing shoefor the Standardbred surfaces, but can also be used successfullywith Thoroughbreds. The punching is also slightly deeper to helpget good nailing. Available unclipped or toe clipped with a 2 mmtoe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Outer Rim Front

While Kerckhaert’s Outer Rim Hind is an ideal shape forStandardbreds, this aluminum shoe can also be used successfullyon Thoroughbreds. It has a strong toe clip, unique surface finishwith sole relief and a 2 mm toe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Outer Rim Hind

Unclipped - 4, 5, 6, 7, 8, 9

Toe Clipped - 4, 5, 6, 7, 8, 9

Toe Clipped - 4, 5, 6, 7, 8

18


The clipped version of the Kerckhaert Full and Half Swedge offeradditional security for the shoeing cycle. The strong toe clip ofthese shoes will help avoid the problems of shoes sliding backwhile in performance or in the stall. The support in the heel area,with a slightly wider lateral heel will increase the chances ofkeeping your horses sound. Excellent shape minimizes time spenton fitting shoes.

Punched for 4-1/2 Race, 4-1/2 Slim or 5 Race.

Full & Half Swedge Hind Toe Clipped

Full Swedge Hind Toe Clipped - 1, 1.5, 2, 2.5, 3, 3.5, 4

Half Swedge Hind Toe Clipped - 1.5, 2, 2.5, 3, 3.5, 4

For years the market had no choice in the Standardbred shoemarket. The introduction of the Kerckhaert Swedges, made with atough, durable steel is a dream come true for many. The shapes ofthe shoes are a significant improvement and the carefulconsideration seen in the nail placement and support in the heelsare noticeable features.


Full & Half Swedge Unclipped

Front - Full Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4 , 6

Hind - Half Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4

19


The Kerckhaert TNC series hasbeen used for many years inthe trotting market in Europe.Made with a very toughmaterial, this flat shoe hascreases that are easily fit andused for the typicalStandardbred race horse. This series helps with the challenge ofgaiting the young horse, as well as fitting the needs of agedhorses.

TNC Flat

Hind (14x5) - Unclipped - 000, 00, 0, 1, 2

Hind (16x6) - Unclipped - 1, 2

Front (18x6) - Unclipped - 1, 2

The TDR is creased, giving goodtraction as well as the breakoverit's famous for. There are threechoices of stock size - 1/2", 5/8"& 3/4".

TDR (Half Round)Front

1/2" (14x6) - Unclipped - 00, 0, 1, 2

5/8" (16x8) - Unclipped - 4x0, 000, 00, 0, 1, 2

3/4" (18x9) - Unclipped - 00, 0, 1, 2

The Standardbred market has longrelied on the half round style totrain and race. The Kerckhaertdesign gives better heel supportand a much more realistic nailpattern to help with theperformance of the horse. The shape of the shoes minimizes theamount of work needed to get a good fit. A high quality steelprovides excellent wear and support for the foot. Shoes aresymmetrical.


9/16" & 5/8" HalfRound Front

9/16" Unclipped - 1.5, 2, 2,5, 3, 3.5, 4

5/8" Unclipped - 2, 3, 4

20


FULL & HALF SWEDGE1 4 4-1/2 11-7/81.5 4-1/4 4-3/4 12-1/22 4-3/8 5 132.5 4-5/8 5-1/8 13-1/23 4-7/8 5-3/8 14-1/83.5 5 5-1/2 14-5/84 5-1/8 5-3/4 156 5-1/4 6-3/4 17-3/8

9/16” & 5/8” HALF ROUND1.5 4-3/8 4-3/4 12-5/82 4-1/2 5 13-1/82.5 4-5/8 5-1/4 13-3/43 4-7/8 5-1/2 14-1/83.5 5 5-5/8 14-5/84 5-1/8 5-7/8 15


OUTER RIM

Front4 4-1/2 4-1/2 12-1/25 4-3/4 4-3/4 12-3/46 5 5 13-3/87 5-1/8 5-1/8 13-7/88 5-1/4 5-3/8 14-1/29 5-1/2 5-7/8 15-1/2Hind4 4-1/4 4-1/4 11-7/85 4-1/2 4-1/2 12-1/26 4-7/8 5-1/8 13-1/27 5 5-1/2 14-3/88 5-1/4 5-3/4 15-1/8

21

ALUMINUM » RIDINGKERCKHAERT HORSESHOES

The Aluminum CenturyUnclipped series providesfarriers who prefer theKerckhaert TriumphAluminum an option forsmaller feet. This shoe isa good fit for feet that require a narrower shape, with less width inthe toe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim nails.

The Century Support frontpattern is a moretraditional round shape.Thicker than Triumph foradditional strength andwithout the broad toe.The shoes have a slightlyfiner punch. Designedwith support in the toe and heel area similar to the Meister steelshoes. Available in front and hind patterns. Quarter clipped front,side clipped hind. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

AluminumCenturyUnclipped

Front - Unclipped - 000, 00, 0, 1, 2




Kerckhaert has produced theAluminum Century Degree tocomplement the AluminumCentury Unclipped shoe. Farrierswill find a wedge platform onthis shoe, with many of thefeatures of the unclipped series.Shoes are symmetrical.


Aluminum CenturyDegree Unclipped

AluminumCentury Clipped

TriumphClipped

AluminumComfort

22


The Triumph Clippedshoes have all the samefeatures as theunclipped version, whileoffering the strength ofquarter clips. Shoes aresymmetrical.


The Triumph is a drop forgedaluminum shoe that has anoptimum front shape. Theseshoes are commonly used bythe Western Pleasure market aswell as the Hunter andThoroughbred shoer. Well-placed nail holes allow for goodnailing and choices when thewall is less than perfect. Thesole relief is built in - saving you time. The material is a highgrade aluminum that provides good wear and strength. Shoes aresymmetrical.


An addition to theComfort series that offersa lighter weight option.Key design featuresinclude - rolled toes andbranches, better breakoverimproves coordination ofmovement, optimizesbalance, less pressure onthe tendons. Adequate thickness to provide strength anddurability. Toe insert to increase wear. Built-in sole relief.

Punched for E-head. 0 & 1 – E-4 Slim; 2 & 3 – E-5 Slim.

Triumph Unclipped

Front - Unclipped - 4x0, 000, 00, 0, 1, 2, 3

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3, 4

Front - Side Clipped - 0, 1, 2, 3

23


Triumph aluminum eggbars offerall of the popular features of theTriumph series - with theadditional support that ischaracteristic of barshoes. Shoesare symmetrical.

Punched for 4-1/2 Regular, 5 Raceor 5 Slim.

Triumph Degree Series has thesame features of the TriumphAluminum flat shoes - with addedlift for improved performance.Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Raceor 5 Slim.

Triumph Degree

Triumph Eggbar

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3

Front - Unclipped - 000, 00, 0, 1, 2, 3


ALUMINUM TRIUMPH, CENTURY AND COMFORT4x0 4-3/8 4-1/4 11-3/4000 4-1/2 4-1/2 12-1/200 4-3/4 4-7/8 13-1/80 5 5 13-3/41 5-1/4 5-1/4 14-1/42 5-1/2 5-1/2 15-1/83 5-5/8 5-3/4 15-7/8 4 6-1/8 6-1/8 16-5/8

Colleoni produces orthopedic andtherapeutic aluminum horseshoes. Threecommon styles are available - flat, wedgeand roller. These wider and thicker shoesare made for larger horses. The roller has heel support and room forstuds to be added. Made in Italy.

Colleoni Aluminum Open Shoes

Flat and Wedge (10mm) - Front - 4, 5, 6Roller (15mm) - Front - 1, 2, 3, 4

Roller

24

ALUMINUM » RACINGKERCKHAERT HORSESHOES

The Kings Plate is used inturf racing and is oftenused in the early trainingstages of the race horse. Itis also a very good shoe forthe western pleasure showhorse and smaller hunters.The features of this shoeinclude a flush toe insert,sole relief, good nailplacement with plenty of options, and a heel taper that savestime. The web of the shoe is slightly wider providing a good baseof support and strength to prevent spreading.

Kings Plate (Flush Toe)

The Kings Low Toe style offers another option for dirt tracks. Thetoe grab is 3/16" (3.9 mm) above the surface of the shoe.

Kings Low Toe (3.9 mm)

The Regular Toe is used primarily on dirt tracks. The toe grab is1/4" (5.5 mm) above the surface of the shoe. The hind pattern isoften used in conjunction with other styles of front shoes. The webof the shoe is slightly wider providing a good base of support andstrength to prevent spreading, especially on "stall kickers."

Kings Regular Toe (5.5 mm)

Front or Hind - Unclipped - 3, 4, 5, 6, 7, 8

Front - Unclipped - 2, 3, 4, 5, 6, 7, 8

The XT version of the Kings Plate is also allowed on many turftracks. Commonly used by trainers when horses may race either onturf or dirt. Toe grab is 3/32" (2 mm) above the surface of shoe.

Kings XT (2 mm)

Front or Hind - Unclipped - 2, 3, 4, 5, 6, 7, 8

Front - Unclipped - 2, 3, 4, 5, 6, 7, 8

Hind - Unclipped - 4, 5, 6, 7, 8

All Kings Plates are symmetrical and are punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

8 mm toe grab.

Kings Quarter Horse Toe (8mm)

Front - Unclipped - 4, 5

25


This is a hind patternshoe used most oftento raise the heels on ahorse that has atendency to run downbehind. Available inhind pattern only, itcomes with two toegrab styles; XT andRegular toe. TheRegular toe is alsoavailable with toe clips. Shoes are symmetrical.


Kings Degree Hind XT (2mm) andRegular Toe (5.5 mm)

XT Hind - Unclipped - 4, 5, 6, 7

RT Hind - Unclipped - 4, 5, 6, 7

RT Hind - Toe Clipped - 4, 5, 6, 7

This outer rim style has the classicKings shape, rounder in the toeand quarters. Used primarily onThoroughbred racehorses, theOuter Rim offers a lot of traction.Front only.


Kings Outer Rim XT (2 mm)

Racing markets in various parts ofthe world have found clips to beextremely useful in keeping shoessecure. The North American racingmarket has also been moving inthis direction. The side clippedKings plates are available in aflush toe style with wider web foradditional support.

Punched for 3-1/2 Race, 4-1/2Race or 4-1/2 Slim.

Kings Extra Sound Clipped



26


The Synergy shoe is availablewith an XT insert only (2mm). This shoe easesproblems that occur onsynthetic surfaces as a resultof too much traction. SynergyXT Fronts and Hinds can beused on any track surface,including those requiring atoe grab of no more than 2mm. Hinds are also available with toeclips. Shoes are symmetrical.


Front and Hind - Unclipped - 3, 4, 5, 6, 7

Hind - Toe Clipped - 4, 5, 6, 7

The Fast Break series is availablewith a flush toe insert or XT toegrab (2mm). The narrower pattern,with a slight radius already in thetoe has met with accolades. Toptrainers are finding this to be adream, especially on youngerhorses. Less stress on the upperlimb, and better hoof condition aswell, make it an excellent option onthe racetrack. Shoes are symmetrical.



XT Front - Unclipped - 4, 5, 6, 7

Fast Break & Fast Break XT

Synergy XT (2 mm)

The Syntra is a hybrid design(Tradition/Synergy) developed to helpwhen horses are racing and training onsynthetic and dirt surfaces. The 5.5mminsert is equivalent to the regular toegrab in the Kerckhaert program but hasa toe design with aluminum coming tothe top of the insert in front of thegrab that helps with landing and breakover on synthetic surfaces.The Syntra is a hind pattern, toe clipped only.


Hind - Toe Clipped - 4, 5 (6, 7 coming in 2012)

Syntra Regular Toe

27


The Traditionseries racingplates fromKerckhaert offerthe NorthAmerican marketan option forshoeing stylesand feet that require a narrower pattern than the Kings. The maindesign differences are the shape, a slight taper in the width fromtoe to heel, a nail pattern that is spread and punched slightlyfiner. This has met with a good response from farriers in themarket. They are finding that the Tradition and the Kings shapehave a place in their trucks due to the wider variations of frontshaped feet. All Tradition Series shoes are symmetrical and arepunched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

TraditionSeries

2 mm toe grab, allowed on turf and synthetic tracks throughoutNorth America. Front and hind patterns.

Tradition XT (2 mm)

Front - Unclipped - 3, 4, 5, 6, 7, 8


3.9 mm toe grab, allowed on all dirt tracks and some syntheticsurfaces in North America. Available unclipped and front patternonly.

Tradition Low Toe (3.9 mm)


5.5 mm toe grab, allowed on most dirt tracks. Commonly used onfront feet of racing Quarter Horses. Front and hind patterns.

Tradition Regular Toe (5.5 mm)

Front - Unclipped - 3, 4, 5, 6, 7


8 mm toe grab, used behind on some Thoroughbreds on dirt tracksand many racing Quarter Horses.

Tradition Quarter Horse Toe (8mm)


Tradition Regular Toe and XT Clipped

28


Light and Heavy. Whether you’re shoeing for the Keeneland selectsale or putting the first shoes on the “runner” down the road, theDR 15x7 or Kings DR 16x8 will fit the bill. The shoe shapes,combined with excellent nail placement and fit, make shoeing theyearling or two year old a lot easi er.

DR punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.Kings DR punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

One of the fastest growing styles in the racing line, the Traditionclipped shoes have hit the market at a full gallop. Top farriers areusing the hind shoes most often. They are excellent in stallsituations where concrete or cement block is the construction type.The clips of the Kerckhaert shoes are recognized for their strengthand appropriate size. Now available on XT fronts and hinds andRegular toe hinds. Shoes are symmetrical.


Steel Training

XT - Front - Toe Clipped - 4, 5, 6, 7

XT - Hind - Toe Clipped - 4, 5, 6, 7

Regular Toe - Hind - Toe Clipped - 4, 5, 6, 7

Front - DR 15x7 - Unclipped - 24, 25, 26, 27, 28, 2 9, 30

Front - Kings DR 16x8 - Unclipped - 27, 28, 30, 32

24 25 26 27 28 29 30 32

Race Size » 0 1 2 3 4 5 6 7

29


The material of the BlueBond withstands thepunishment of the track. Thenail holes are alreadypunched through thematerial and a sole relief isbuilt-in, saving time. Shoesare symmetrical.


Blue Bond

Applied by No-Vibe, this bonded shoe is known throughout themarket for the success it’s seen. The Yellow Pads are available onKerckhaert, the finest race plates in the market. Shoes aresymmetrical.


No-Vibe

Kings Flush Toe - Front - Unclipped - 3, 4, 5, 6

Kings XT - Front - Unclipped - 3, 4, 5, 6, 7, 8

Kings Outer Rim XT - Front - Unclipped - 4, 5, 6, 7

Tradition XT - Front - Unclipped - 4, 5, 6, 7

Tradition XT - Front - Toe Clipped - 4, 5, 6

Kings XT - Front - 3, 4, 5, 6, 7

Kings Low Toe - Front - 4, 5, 6, 7

Tradition XT - Front - 4, 5, 6, 7

A race plate designed to allowfor absorption of pressurefrom the heels and bars.These specially designedplates feature the Blue Bondmaterial in a “drop-down”design which adds very littleweight to the shoe. Shoesare symmetrical.


Smart Bond™

Tradition XT – Front – Unclipped - 4, 5, 6, 7

30



KINGS RACE PLATESFront2 4-3/8 4-1/8 11-3/83 4-5/8 4-3/8 11-3/44 4-7/8 4-1/2 12-1/25 5 4-5/8 12-3/46 5-1/4 4-7/8 13-1/27 5-3/8 5 13-7/88 5-5/8 5-1/2 15 9 5-1/2 5-3/4 15-1/4

KINGS, TRADITION, SYNERGY & SYNTRA RACE PLATES

Hind

2 4-1/4 4-1/8 11-1/83 4-1/2 4-3/8 11-5/84 4-5/8 4-1/2 125 4-3/4 4-3/4 12-5/86 5 5 13-1/47 5-1/4 5-1/8 13-7/88 5-1/2 5-1/4 14-1/4

TRADITION, SYNERGY & SYNTRA RACE PLATES

Front

3 4-1/2 4-3/8 11-3/44 4-5/8 4-1/2 12-1/45 4-3/4 4-3/4 12-5/86 5 4-7/8 13-1/47 5-1/8 5-1/8 148 5-5/8 5-1/2 15-1/8

Quarter Horse Toe: 8 mm

Regular Toe: 5.5 mmLow Toe: 3.9 mm

XT: 2 mm

Flush: 0 mm

Toe Grab Measurements

31

BAR SHOESfarrierproducts™

SX-7 and SX-8 Egg BarOur bar shoes are carefullyfabricated using the Kerckhaertshoes and the same steel for thebars. Available in a variety ofstyles, these bar shoes have becomethe most popular brand in NorthAmerica. The SX-7 are the lightershoes in the series. Commonly usedin the quarter horse and light horsemarket. The SX-8 is used in a varietyof disciplines, especially wherestrength and good support arerequired. All SX-7 and SX-8 BarShoes are symmetrical.

SX-7 are punched for 4-1/2 Regular, 5 Race or 5 Slim, dependingon size.SX-8 are punched for 5 City or 5 Slim.

SX-7 & SX-8 Heart Bar

SX-7 - Front - Unclipped - 00, 0, 1, 2

SX-7 - Front - Quarter Clipped - 000, 00, 0, 1, 2

SX-8 - Front - Quarter Clipped - 00, 0, 1, 2, 3, 4

SX-8 - Hind - Side Clipped - 00, 0, 1, 2, 3, 4

SX-7 - Front - Quarter Clipped - 000, 00, 0, 1, 2


SX-7 & SX-8 Straight BarSX-7 - Front - Quarter Clipped - 00, 0, 1, 2, 3


32

BAR SHOESfarrierproducts™

Providing an option for the very largefoot, this 22x10 mm shoe is availableunclipped only.

Punched for E-head.

The TDR is made with approximately3/4" half-round stock. This givesadditional help with breakover whilegiving plenty of support.

This is a clipped shoe that has similarsteel sizes to the SX-8 but is punchedfor the E-head nail.

The Standard is the most basic bar shoein the farrierproducts™ line. It isavailable in a one shape pattern withoutclips. A versatile shoe, this series can beshaped for front or hind feet. Shoes aresymmetrical.

Size 000 punched for 5 Race or 5 Slim.Sizes 00, 0, 1 and 2 punched for 5 City or 5 Slim.

Standard Egg Bar

DF Egg Bar

One Shape - Unclipped - 000, 00, 0, 1, 2


Hind - Side Clipped - 0, 1, 2, 3

Half Round Egg Bar

SSP Egg Bar

3/4" (18x9) - Unclipped - 00, 0, 1, 2

Front - Unclipped - 5

• Rolled process produces nails with hightensile strength.

• The nails are packaged in an attractive,durable plastic containerwith color coded labelsindicating the different nailstyles.

• Boxes contain 250 nails. • 5 Race, 5 City and 5 Slim

are also available in boxescontaining 100 nails.

• Many nail sizes are also available in FarrierPacks - containing 1,250 nails.

33

HORSESHOE NAILSVECTOR

It’s notmagic - justgreat design.

E-6 SLIM

E-5 SLIM

E-4 SLIM

E-3 SLIM

VX-60

VX-50

6 CITY

5 CITY

5 SLIM

REGULAR HEAD 4-1/2

SPECIAL 5

SPECIAL 4-1/2

RACE 3-1/2 XS

RACE 5

RACE 4-1/2

RACE 3-1/2

RACE 4 1/2 XS

NEW!

4-1/2 SLIM

REGULAR HEAD 5

REGULAR HEAD 6

34

Vector V-TrakThe consistency of the hard facingcombined with the high tensilestrength of the Vector nails hasproduced a traction product thathas met the demands of theprofessional farrier. Prices are verycompetitive.

Available in sizes 4-1/2 Race, 5 City, 6 City andE-4 Slim. Packed in 100 piece plastic boxes.

HORSESHOE NAILSLIBERTY

Engineered to meet the demandfor a high quality forged nail, keydesign features include; preciseand consistent specifications,optimum clinching, accurate bevels and points providing consistentdriving, and outstanding finish.

Available in sizes 5 City and E-2 Slim through E-7 Slim. Packed in250 piece boxes. Coming in 2012 - Combo 5, Combo 5 Slim,5 Slim and 5 Race.

Liberty Horseshoe Nails

NEW!

V-TRAK » HORSESHOE NAILSVECTOR

35

RASPSBELLOTA

The Bellota brand has been a leader inthe North American market since theearly 80’s. We are pleased to offerthese products through our farrierproducts™ dealers.

Bellota Rasps, Filesand Tools

Bellota Top Sharp RaspThe aggressive design of the file side on the Top Sharp lets you getin and get out with maximum results.

Bellota Classic RaspThe smooth cut of the classic file side is the best choice for asmooth finish.

Bellota Razor RaspLike its name implies, the rasp side of the Razor offers an extremecut when compared to other Bellota rasps, while the file side isalso coarser. This 14” rasp incorporates a tooth design to reduceclogging and to retain its sharpness.

Bellota Raptor RaspThe extra width of this new rasp –1/2" wider than other Bellota Rasps– provides a greater cutting surface.The 14" Raptor features amaximum cut on the rasp side;with a coarse cut on the fileside.

36

FILES AND TOOLSBELLOTA

RASPSMERCURY

Mercury Rasps• Produced according to

the highest standards • Position of the teeth

on the rasp side and the unique composi-tion of steel ensuresthe rasp will staysharp longer

• Excellent reviews fromfarriers

Bellota 6” and 8” Knife FilesMill bastard with 2 round edges. Each file is checked, one by one,to ensure quality and provide perfect filing. All Bellota files areprotected by a rust proofing treatment.

Bellota Hammers• 6 oz. Driving Hammer• Hammer Handle Replacements• Cross Pein Hammer

(1.25, 1.61, 2 lb.)

Other Tools fromBellota• 9” Nail Cutter• Wood Rasp Handles

(Clear & Dark)• Half Round 14” File

Bellota Top Finish File Farriers looking for a finish flat file haveagreed that the 14” Top Finish File exceedstheir expectations. One side is coarse, withthe other being fine.

37

TOOLSFootPro™

Made in the USA, the FootPro™nipper line has been expanded toinclude 12”, 14”, 15”, 12” HalfRound and 14” Race Track.All tools are competitivelypriced and are backed byour quality service andstandard warranty.

FootPro™ Nippers

FootPro™ ClincherThe angled, ergonomic design of the FootPro™Clincher allows easier clinching with less stresson your wrists. The teeth of this tool haveproven to be extremely durable under the mosttrying of circumstances.

FootPro™ Nail PullerThe FootPro™ Crease Nail Puller is designed forhigher leverage with less effort. This tool is 11-1/2"long, made using high-grade tool steel and is fullypolished for handling comfort. Used properly, thistool will provide long-term service and make thepulling of nails a much easier task.

FootPro™ is a brand developed by FPDbased on years of feedback fromprofessional farriers. The detailed finishby skilled craftsmen is a trade mark forthe FootPro™ line that focuses onengineering using the highest quality of steel and heattreatment. All FootPro™ tools are fully polished for additionalcomfort.

FootPro™

™

FootPro™ Rounding HammersThe design of the FootPro™ 1-3/4 lb. and 2 lb.hammers draw on ideas provided byprofessional farriers regarding the balanceand details of a well performing forginghammer. All details of forging, machining,tempering and finishing were carefullyscrutinized by respected tradesmen. Hammers areforged with high quality steel, are 16" in overalllength, fully polished and feature a 1-5/8" diameter face.

NEW!

38

APRONSFootPro™ and farrierproducts™

Using many of the same featuresfound on the fp Light Aprons, weoffer a full leather apron. The ModelK Leather Apron is available inshort (26'') and long (30'') lengths.It has two knife pockets and thebelt snaps at the hip and has anadjustable buckle as well.

The Model K Light Apron is madewith Proban fire retardant materialthat is light but tough. It isreinforced in the crotch area andthe leather pads give goodcoverage. Available in short (26'')and long (30'') lengths. It has twoknife pockets and the belt snaps atthe hip and has an adjustablebuckle as well.

fp™ Aprons - Leather

fp™ Aprons - Light

A design similar to our Model Kaprons but with improved fit,material quality and design.Outside of leg is wider, with knifepockets dropped lower so they areout of the way when working.FootPro™ aprons are available in26" and 31" lengths.

FootPro™ Aprons

Farrier Product Distribution is proud tooffer a range of tools, aprons andfinished bar shoes made and brandedonly for distribution by FPD. Theseproducts have been developed andproduced to specifications andstandards suitable for the professional market.

farrierproducts™

fp™ Outer Rim ClincherThe custom design of fpTM's new OuterRim Clincher allows the jaw to reach thenail head even when below the outer rim. Theclincher is polished, forged from high quality tool steel, precisionmachined and heat treated for strength and durability. Excellenttool for race track farriers.

39

TOOLSfarrierproducts™

fp™ 12" Pull Off Polished

fp™ Nail Puller Black

fp™ Saddlehorse ClincherForged from high quality tool steel, precision machined, and heattreated for strength and durability. Fully polished.

They are used in removal of shoes and can also be used to cutnails without damage to the blades. Fully polished.

Get in there and get the nails out, without hurting the hoof wall.Perfect for creased and fullered shoes.

NEW!

40

TOOLSfarrierproducts™

fp™ Knife Sharpener

fp™ Brass Hoof Balance Ruler

24" brass ruler - folds in the middle; inches on one side,millimeters on the other. Typically used in measuring steel whenforging shoes.

fp™ Brass Ruler

High quality knife sharpener is made of diamond coated solidsteel with plastic handle.

12" brass ruler - inches on one side, millimeters on theother. Can be used to check the medial/lateral balance of thefoot.

Our aluminum rasp handles have two sets of hex head set screwsto securely hold rasp in place. Available in 3 sizes: 1-1/4", 1-1/2",and 1-3/4". Comes with L shaped hex wrench.

fp™ Rasp Handles

41

HOOF KNIVES

• Made of knife-grade, hardenedcarbon steel

• Unique diamond wood handle

• Right or left handed• Blade length: 2-1/2"• Handle length: 5-1/2"


• Unique diamond wood handle

• Blade length: 2-1/4"• Handle length: 5-1/2"


• Narrower and longer woodenhandle

• Right or left handed• Blade length: 2-1/2"• Handle length: 5-7/8"

• Made in Germany• Made of high quality steel blade• Right or left handed


• Made in Germany• Made of high quality steel

blade

• Blade length: 3"• Handle length: 5-3/4"

Bloom Forge Hoof Knives

fp™ Hoof Knives

NEW!

NEW!

Bloom Forge Regular & Offset Blade

Bloom Forge Loop

Bloom Forge Special Knife

fp™ Wide & Narrow Blade

fp™ Double Edge Right

42

HOOF KNIVES

• Made in Sweden• Right or left handed


FDick Hoof Knives

Victorinox Hoof Knives

Frost (Mora) Hoof Knives

• Made in Switzerland• Right or left handed


Victorinox Regular & Double Edge

Frost (Mora) Wide & Narrow Blade

• Made in Germany• Blade length: 3"

• Handle length: 5-3/8"FDick Double Edge Right

• Made in Germany• Right or left handed

• Blade length: 3"• Handle length: 5-3/8"

FDick Wide & Narrow

• Made in Germany• Special contoured handle• Right or left handed


FDick Gripmaster

• Made in Germany• Right or left handed


FDick Ascot

43

TOOLSMISCELLANEOUS

Knipex ToolsFarriers recognize the tough, durable construction of this brand ofcutters. You can count on these cutters to hold up to the dailydemands of cutting horseshoe nails.

Magnets2” Pot Magnet2 5/8” Pot Magnet3 1/8” Pot MagnetHammer Handle Magnet

Rasp and File HandlesTwist-On Plastic (Orange & Green)Twist-On Wood (Long & Short)Drive-On Woodfp™ Aluminum Rasp HandlesBellota Wood Rasp HandlesDrive-On Wood 6" and 8" File Handles - New!

KNIPEX 8” ULTRA CUT

KNIPEX 8” NAIL CUTTER

KNIPEX 12” POWER CUT

KNIPEX 12” CUTTER WITH CLINCH BLOCK

Jumbo Butcher Block BrushJumbo Flat Wire Block Brush with awood handle. 9-1/4" x 3-3/4". Wiretrim length 1-1/4". A great tool forcleaning scale during forging.

Replacement HandlesBloom Forge - 13-1/2" and 14-1/2" Driving Hammer HandleBloom Forge - 18" Rounding Hammer HandleBloom Forge - Punch and Creaser HandleFootPro™ - 16" Hammer HandleDiamond - 36 oz. Rounding Hammer HandleHorsehead - 8 oz. and 12 oz. Hammer Handle

44

GRINDERS AND ABRASIVESFarriers have found certain power equipment to be an integral partof their shoeing rig. Baldor has made grinders and buffersspecifically for the farrier market and together with variousattachments offered by FPD, the efficiency of farriers has increaseddramatically.

Attachments for 1/2 HP and 3/4 HPGrinders• 6” and 10” Expander Wheel with Guard• 7" Aluminum Heel Finish Disc

Knife SharpeningProducts• 6” Buffing/Sharpening Wheel• 6” Felt Wheel with Groove• Buffing Compounds

Hoof Finishing ProductsHoof Buffer AttachmentReplacement Sleeves & Bladders

We offer a wide range of abrasivebelts and discs specifically selectedfor the farrier’s use. VSM and 3M arethe high quality brand names that wefeature.

Baldor Buffers and Grinders• 1/4 HP Buffer (1800 RPM)• 1/2 HP Grinder and 3/4 HP Grinder (3600 RPM)

45

TOOLSNORDIC FORGE

Nordic has taken huge steps forward inmanufacturing a high quality, mid-range pricetool line under the “Viking” brand. The efforthas been noticed throughout the world. Theyhave a range of nippers, clinchers, hammers,and other farrier tools to compliment the nippers.

Nordic Forge

Nordic Nippers12" Nipper (Polished & Semi-Polished)14" Nipper (Polished & Semi-Polished)14" Race Track Nipper (Polished & Semi-Polished)15" Nipper (Polished & Semi-Polished)

Nordic ClinchersAngled Clincher (Semi-Polished)Straight Clincher (Semi-Polished)

Nordic Hammers10 oz. Driving Hammer12 oz. Driving Hammer14 oz. Driving Hammer1-1/2 lb. Rounding Hammer2 lb. Rounding Hammer

46

TOOLSBLOOM FORGE

Roy Bloom is recognized throughoutthe industry for the attention todetail and performance of theproducts he manufactures. Toolsmade by Bloom Forge come to youready to work in your application.As a farrier, Roy understands the use of the tools. As ablacksmith, he understands the unique characteristics of thematerials and stresses they endure in use. Bloom Forge offers themost extensive line of commercially available forging and shoeingtools in the North American market.

• Rounding Hammer (1-3/4, 2, 2-1/2 lb.)

• Rounding Hammer (2 lb. Narrow Face) - New!

• Cross Pein Hammer (2 lb.)• Replacement Hammer Handles

• Long Pritchel• H-13 Pritchel• City Forepunch

• Small Bob Punch• Stud Punch (5/16” Round)

• Fire Tongs (1/4”, 5/16”, 3/8”, 1/2”)

• Short Tongs (1/4”, 5/16”, 3/8”)

• Hot Fit Tongs• Specialty Tongs

(Rat Tail, Rose)• Replacement Tong Rivets

LONG PRITCHEL

CITY FOREPUNCH

HOT FIT TONGS

FIRE TONGS

ROUNDING HAMMER

NEW!

NARROWFACE

Bloom Forge Straight Tools

Bloom Forge Tongs

Bloom Forge Hammers

47

TOOLSBLOOM FORGE

• City Forepunch• Regular Head Forepunch• E-Head Forepunch• City Drift• Small Bob Punch• Large Bob Punch• Creaser (Right & Left)• Combo Cut (Right & Left)• Foot Stand Combo Cut (Right)• Clinch Undercut (Right & Left)• Clinch Cutter (Right & Left)• Clinch Block• Forepunch Gauge

• City Forepunch• Regular Head Forepunch• E-Head Forepunch• City Drift• Small Bob Punch• Creaser

• Creaser - Draft• Center Punch• Stud Punch (5/16” Round)• Hot Cut• Replacement Wood Handles

DRIFT

CREASER

CITY HEADREGULAR HEAD

CENTER STUD

HOT CUT E-HEAD

Bloom Forge Wood Handle Tools

Bloom Forge Steel Handle Tools

BACK BYPOPULARDEMAND

FOOT STANDCOMBO CUT RIGHT

48

TRACTION PRODUCTSTUNGSTEN AND fp™

As with the Drive-In Studs,you seat the tapered shaft ofthe pin into the hole. Holesmay be drilled in toe or heelof the shoe. Installationrequires the use of a #15 DrillBit that is included withevery package of 100 pins.

CountersinkDrill BitThis German-made Countersink Drill Bit isreceiving very positive comments from farrierswho are using it. The overall length of the bit is3-1/4”. With the shorter bit there is less chance ofbreakage compared to longer bits. For use with a 3/8" tap.Excellent for both 8 mm and 10 mm shoes.

Simply drill with a 17/64" bit and seatthe tapered shaft of the stud into thehole. It’s amazing how much confidenceyour horses will gain when on blacktop orconcrete. The studs should also give goodtraction for trail riding in terrain withlarge rocky footing. 50 pieces per pack.

Drive-In Studs and Tungsten Carbide PinsFor those situations when you need only enough traction toprevent sliding or slipping on hard surfaces, Tungsten Carbide Pinsor Drive-In Studs are very simple to apply.

Tungsten Pins

V-Trak Nails

Drive-In Studs

49

HOOFCARE PRODUCTSVETTEC AND HAWTHORNE

We are proud to be a major distributor for both Vettec andHawthorne Products. Their commitment in producing useful,quality products is a good match for the FPD business philosophy.No gimmicks – just tried and true products for helping tomaintain the health of the equine hoof.

Hawthorne ProductsPine TarVenice TurpentineIchthammolLiquid Sole PakSole Pak (Individual Patties, 4 & 8 lb. buckets)

Vettec ProductsEqui-PakEqui-Pak CSEqui-Pak SoftAdhereEqui-BuildSil-PakSoleGuardSuper FastThrush Pak

50

EDUCATIONAL ITEMS

Since its founding in 1990, FPD hasactively engaged in providing programsand resources that encourage andpromote educational excellencethroughout the farrier industry. FPD isunique and progressive in theircommitment to hoof care education forall farriers, veterinarians and othersinvolved in the equine world.

BooksHoof Problems by Rob van Nassau

Hickman’s Farriery by John Hickman & MartinHumphrey

Elements of Farrier Science by Don Canfield

The Principles ofHorseshoeing III by Dr. Doug Butler & JacobButler

The Complete HorseshoeingGuideby Robert F. Wiseman

Horse Gaits, Balance &Movement by Susan E. Harris

The Blacksmith: Ironworker & Farrier by Aldren Watson

51

EDUCATIONAL VIDEOSHOT IRON PRODUCTIONS

Videos (DVD ONLY)Hot Iron Productions (HIP Inc.) wasfounded in the mid-90’s to produce highquality video footage for the farriermarket. Roy Bloom CJF and Dave FarleyCF were ahead of the curve in theindustry, conducting clinics throughoutthe US and Canada, using video to helpattendees get all the details that were apart of their presentations. Bloom and Farley have each beenshoeing horses for over 30 years and are recognized among theirpeers as leading educators and craftsmen in the trade.

Balancing the Equine Hoof: Understanding the 12 Reference Points with Roy Bloom & Dave Farley

Shoeing the Jumper - New!with Roy Bloom & Dave Farley

Fundamentals of Forging # 1 – The Hammer, Tongs & Anvilwith Roy Bloom

Fundamentals of Forging # 2 – Basic Shoemaking with Roy Bloom

Fundamentals of Forging # 3 – Forge Welding Steel & Aluminum with Roy Bloom & Dave Farley

Fundamentals of Forging # 4 – Cowpies & Clips with Roy Bloom & Dave Farley

Tool Maintenance with Roy Bloom

Basic Shoe Modifications with Roy Bloom & Dave Farley

52

HOOF PADSTEP AND CASTLE

Castle PlasticsWe are pleased to be a distributorfor Castle Plastics – a leadingmanufacturer of horses hoof pads.Castle takes pride in the

innovation and quality of products that they produce, including barwedge pads, 2 and 3 degree oval pads, snow ball pads, impakpads, pour pads, and wedges with frog support.

FPD is the exclusive distributor of Dura-Shock Pads. We offer a fullrange of flat, wedge and rim pads. We also distribute the Lily Pad.Once taped on for immediate emergency support it creates aninstant heartbar effect without trauma to the foot.

1/8” Flat Pad3/16” Flat Pad5/32” Flat Pad11/32” Wedge Pad1/8” Rim Pad1/8” Double Rim PadLily Pad

TEP Pads

Documents

KERCKHAERT HORSESHOES AMERICAN SERIES » STEEL...Pride Sliding Plates 1/4" x 1" Pride Sliding Plates 1/4" x 1-1/4" Aslightly wider version of the Pride Sliding Plates.Also tapered