Honing Machine for Circular Knives

KLA 220 - HV 153

Safety To change the knife, the retaining arm is turned horizontally (see image, left). All drives are locked during the knife change.

Overheating protection The honing wheels move through a water quench. This prevent the cutting tools from overheating during the sharpening process.

Limit stop system A finely adjustable stop system ensures, that only as much as material is removed as absolutely necessary.

Dressing Honing wheels which have become untrue are fast and easily dressed with a diamond truing device.

Cutting angle The cutting angle can be set continuously variable. The adjusted value is displayed on a clear scale.

Sharpness, cutting angle and cutting edge width of a circular knife have a big influence on the quality of the cut products.

The KLA 220 - HV 153 creates exactly ground and precisely angled cutting edges. And it retains the original circular shape. And this over the entire service life of the circular knives.

Precise cutting edges Due to gentle ground circular knives

Circular knife 475 mm (18.7 in) diameter Circular knife 60 mm (2.36 in) diameter

1 Height adjustment

2 Drive motor for circular knives

3 Circular knife grinding attachment

4 Truing unit

5 Variable speed adjustment (optionally)

6 Water tray

The KLA 220 - HV 153 is suitable for sharpening flat and saucer-shaped circular knives with diameters from 60 mm (2.36 in) up to 475 mm (18.7 in) with single and double beveled edges.

The circular knives are driven electrically. Thus, they remain absolutely round. The maximum width of the cutting edge is 6 mm (0.24 in). The material removal on the knife is extremely low.

A work light ensures very good illumination of the working area. The speed of one of the two pairs of honing wheels can be regulated variable via a potentiometer (optionally). Thus, single beveled cutting edges can be easily ground.

Perfect cutsDue to absolutely round circular knives

Dressing Grinding angle adjustment

764 mm833 mm

789

mm

764 mm833 mm

789

mm

Width 835 mm Depth 765 mm Height 790 mm Weight approx. 76 kg

Width* 1000 mm Depth* 1000 mm

Electrical supply 0.5 kW 3x 400 V 50 Hz Back-up fuse 16 A

Sharpening range 60 - 475 mm (2.36 - 18.7 in) diameter Circular knife holding fixture 1 60 - 180 mm (2.36 - 7.1 in) diameter Circular knife holding fixture 2 180 - 250 mm (7.1 - 9.84 in) diameter Circular knife holding fixture 3 180 - 475 mm (7.1 - 18.7 in) diameter

The machine meets the EC safety and health requirements and is provided with the CE-symbol.

As at 2018.03 | Subject to technical modifications.

Technical specifications and space requirements*

KLA 220 - HV 153

KNECHT Maschinenbau GmbHWitschwender Straße 26 ■ 88368 Bergatreute ■ Germany ■ T + 49 -7527- 928-0 ■ F + 49 -7527- 928-32mail@knecht.eu ■ www.knecht.eu