Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Louis Benton Steakhouse, Grand Rapids, MI | McGraw Construction 2010
Custom Wire Mesh Grilles | Style #212 press crimp, square wire,
manufactured and custom fit by Klise Mfg.
Custom Hand-craftedWire Mesh GrilleworkSince 1910
Century Furniture, Hickory, NC | Consulate Collection
Fontaine Credenza & China Deck | www.centuryfurniture.com
Klise Custom Wire Mesh Grille | reeded, flat wire.
Natural Elements Cabinetry of West Michigan
Custom Kitchen Cabinetry | www.naturalelementswm.com
Custom Wire Mesh Grilles | Style #311 press crimp, flat wire.
CLOVERLEAF
1-1/16"
#4 CONE
7/16"
#6 CONE
9/32"
1533
3/8"
6005
3/16"
#16 ESCUTCHEON
PIN2002
7/16" 1039
9/16"
20022002
Grabill Cabinet Company, Grabill, INwww.grabillcabinets.com
Custom brass wire inlay in
kitchen cabinet mullion door.
Klise Design Concept
Custom Light Cover
1⁄16˝x 3⁄16˝ flat wire
Insignia Homes,
Grand Rapids, MI 2013 Parade of Homes
British-Colonial Bath Cabinet
Style #304 single crimp,
square orientation
Klise Design Concept Wine Rack
Style #203 single crimp,
3⁄4˝ mesh, 1⁄16˝ square wire
Sacred Heart of Jesus, Grand Rapids, MI
Style #311 press crimp, flat wire,
custom spacing, size & radius
custom metal framing
gn Conceptgn CConceptgn Cn Cg ConconC cepcepc pttpKlise Desig
s,ss,,,
I I Issss
tttt
p,p,,,,
nnnn
For over years... With more than 100 years of experi-
ence, Klise continues to be a leading manufacturer of high-quality decorative lineal wood mouldings and inserts serving the design-build community for commercial and residential projects. Klise also maintains a significant design presence with leading manufacturers in the kitchen cabinet and high-end furniture markets, providing solutions for traditional and transitional design trends.
Handcrafted wire meshWith the introduction of customized, hand-crafted wire
mesh grillework, Klise now provides an additional way
to distinguish and enhance cabinetry, wine cellars,
furniture and other architectural designs.
When designing your next project, consider adding
unique or classically inspired wire mesh grilles, formed
wire or other custom metal fabrications. Our factory
artisans have over four decades of experience in producing
intricate, American-made metalwork and can provide
a wealth of creative suggestions and design ideas to
distinguish any project.
Finishing OptionsFor most grills, wire material and style is selected, crimped
and hand-woven to customer specifications. It is then
electroplated with the selected finish option. A final high
grade lacquer spray coating is applied for durability.
Due to the hand-crafted nature of this product, there will
be minimal color variations within an order which adds to
the unique character of the product. Final product may
vary from samples or from order to order and exact color
matches cannot be guaranteed. For critical matching,
unfinished grills may be ordered and finished locally to
enable final on site inspection.
• Standard electroplating options include Brass, Copper
and Steel. Additionally, Chrome, Nickel, Pewter and
Bronze are also available.
• Standard finishes include Antique, Satin and Bright
with special glazing effects also available.
• Plain steel or solid brass wire grilles are also available
without electroplating or finishing effects.
AccentsRosettes and cones can be tack-welded to wire joints for
that unique addition. They are available in any electro-
plate or finishing effect. Shown below in brass with other
styles and types available for special order.
Since 1910
STYLE 303: CANED WIRE MESH GRILLE PATTERN1/2” or 5/8” mesh use .050” wire; 3/4” mesh use 1/8” wire. Mesh spacing measured center of crimp-to-crimp contains both single crimped wires andstraight cross wires.
STYLE 221: DOUBLE CRIMP | SQUARE WIRE3/4” mesh use 1/16: wire; 1”, 1-1/8”, 1-1/4”,1-1/2” mesh use 1/16” or 3/32” wire; larger up to 2-1/4” use 3/32” wire.
STYLE 301: SINGLE CRIMP | FLAT WIRE1/2” mesh use .040 x 1/8“ wire; 5/8” mesh use.040 x 1/8” or 1/16” x 1/8” wire. 3/4” maximumspacing.
INSET: Also available in reeded wire (STYLE R301).
STYLE 212: PRESS CRIMP | SQUARE WIRE5/16” & 1-1/8” or 1/2” & 1-1/2” combinations, orany combinaion in multiples of 1/2” or 5/8”. Using wire-to-wire measurements, the large opening can be any multiple of the close wires’ opening size. 5/16” & 1-1/8” mesh use 1/16” wire, larger multiples use 1/16” or 3/32” wire.
STYLE 322: DOUBLE CRIMP | FLAT WIREWith 1/16” x 1/8” plain flat wire, 1/2” & 1-1/2” mesh.
STYLE R322: DOUBLE CRIMP | REEDED WIREWith 1/16” x 1/8” reeded wire, 1/2” & 1-1/2” mesh.
STYLE 112: PRESS CRIMP | ROUND WIRETwo or more opening sizes. Using wire-to-wiremeasurements, can be any multiple of the closewires’ opening size. 5/16” & 1-1/8” mesh or 1/2” & 1-1/2” mesh use 1/16” wire; Larger multiplesuse 1/16” or 3/32” wire. Other variations available.
STYLE 211: PRESS CRIMP | SQUARE WIREMesh sizes from 1/2” to 4”. 1/2”, 5/8”, 3/4” meshuse 1/16” wire; 1”, 1-1/4”, 1-1/2” and up use 1/16”or 3/32” wire.
STYLE 111: PRESS CRIMP | ROUND WIRE1/2”, 5/8”, 3/4” mesh use 1/16” wire. 1” mesh use1/16” or 3/32” wire; larger to 3-1/2” use 3/32” wire.
STYLE 101: SINGLE CRIMP | ROUND WIRE 3/8”, 1/2” mesh use .050” wire,
5/8”, 3/4” mesh use 1/16” wire.
STYLE 201: SINGLE CRIMP | SQUARE WIRE 1/2”, 5/8”, 3/4” mesh use 1/16” wire.
Please note: Grilles are shown in various colors including; Brass, Steel, Copper and Bronze. However, all grills are available in any electroplating and finishing effect. See “Finishing Options” for more information. *Actual Finishes will vary significantly from photos shown. Most images shown in diamond patterns – also available in square orientation.
STYLE 222: DOUBLE CRIMP | SQUARE WIRE5/16” & 1”, 3/8“ & 1-1/8”, 1/2” & 1-1/2” mesh use 1/16“ wire; 3/4” & 2-1/4” mesh and larger use 3/32” wire.
STYLE 600
CUSTOM FORMED. Many variations possible. Detailed drawing required with full dimensional pattern repeat and possible rosette information. Send templates for arch cuts and other special piece cuts. Available with wire frame border.
STYLE 304 (Square): SINGLE CRIMP | FLAT WIRE1/2”, 5/8” or 3/4” mesh; 1/16” x 1/8” or 1/16” x 3/16” wire recommended.
STYLE 122: DOUBLE CRIMP | ROUND WIRETwo or more opening sizes. Using wire-to-wiremeasurements, the large opening can be any multiple of the close wires’ opening size. 1/4” x 3/4” mesh use 1/16“ wire; 1/3” & 1”, 1/2” & 1-1/2”, 3/4” & 2-1/4” and up use 1/16” wire.
STYLE 503
CUSTOM FORMED. Minimum opening size: 2-1/4”
x 4-1/2”. 3/32” square wire, or various sizes of flat wire. Many pattern design variations possible,as are wire opening sizes and pattern repeat. Detailed drawing required with full dimensional repeat.
STYLE 325: DOUBLE CRIMP | WIRE COMBINATIONDouble crimp; any combination of round and flatwire; any combination of 2 or more mesh sizes;e.g., 1/2” & 1-1/2” mesh with 1/16” x 1/8” flat wireand 1/16” round wire.
Mesh sizes from 3/4” to 2” and above in multiples of 1”. 3/4” mesh use .040 x 1/8” wire; 1” mesh use 1/16” x 1/8” or 1/16” x 3/16” wire; 1-1/4” – 1-1/2” mesh use 1/16” x 1/8” wire; 2” & up use 1/16” x 1/8” or 1/16” x 3/16” wire. Specify rosettes if desired – 1“ up to 1-1/2” mesh at alternate intersections only.INSET: Also available in reeded wire (Style #R311).
STYLE 311: PRESS CRIMP | FLAT WIRE STYLE R321: DOUBLE CRIMP | REEDED WIRE1/6” x 1/8” reeded wire. Mesh sizes from 1” to2-1/4”.INSET: Also available in flat wire (Style #321).
STYLE 121: DOUBLE CRIMP | ROUND WIRE3/8”, 1/2” mesh use .050 wire; 5/8” mesh use .050or 1/16” wire; 1” to 2-1/4” use 1/16“ or 3/32” wire.
STYLE 660
CUSTOM FORMED. 1/16” x 1/8”, 3/16” x 1/16” or 1/16” x 1/4” wire recommended. Many oblongoval pattern variations possible, as are wire open-ing sizes and pattern repeat. Detailed drawing required with full dimensional pattern repeat.
STYLE 403: LARGE MESH | WITH ROSETTES
CUSTOM FORMED. Opening sizes and wiresizes are optional. Detailed drawing requir-ed with full dimensional pattern repeat and rosette information.
STYLE 525: CUSTOM HEX PATTERN | REEDED WIRE
CUSTOM FORMED. Many variations possible.Detailed drawing required with full dimensional pattern repeat information. Send templates for specific reveal and mounting details.
STYLE 540
CUSTOM FORMED. Minimum opening size: 2-1/4” (measured point-to-point on diagonal). There are many pattern variations possible, as are wire opening sizes and pattern repeat. Detailed drawing required with full dimensional pattern repeat.
STYLE 522
CUSTOM FORMED, with bracket clips. Many variations
possible. Detailed drawing required with full dimensional
pattern repeat information. Send templates for specific
reveal and mounting details.
STYLE 605
CUSTOM FORMED. Many variations possible.
Detailed drawing required with full dimensional
pattern repeat and possible rosette information.
Send templates for radius and other
mounting details.
SQUARE DIAMOND
ELONGATED
DIAMOND
VERTICAL
ORIENTATION
Meshes can be made in square,
diamond or elongated diamond
styles. Please specify which mesh
style you require, or provide a
simple sketch or diagram.
Wire meshes.
If you have a need for decorative
metal pieces, let Klise help.
Finished pieces are ready for
installation and are of the finest
furniture quality.
Custom designs. Other custom metal options:• Wine Racks
• Display Racks
• Storage Racks
• Wire Shelving
• And more...
Different types of wire may be
mixed, such as 1/8” reeded wire
woven with 1/16” round wire as
shown here.
Wire styles.
5
e.
al
n.
er
s.
20140910vC
Klise custom formed Asian Tropical Wire Grill
ADEX Platinum Award Winner
Design Journal Magazine (adexawards.com)
Klise custom formed Asian Tropical Wire Grill
Visit our website to see our complete line of custom design options
and popular stock products.
601 Maryland Ave. NEGrand Rapids, MI 49505
P: 616-459-4283 | F: 616-459-4062www.klisemfg.com
Klise is a member of these fine organizations:
If you have any further questions, please contact the Klise Sales Department at 616-459-4283.
Installation information.Our wire mesh grilles are hand-woven to customer specifications. Wire meshes are not welded, but are held together by the interlocking effect of weaving. As a result, the nature of the grille is to be somewhat flexible, and during shipping and handling are likely to change shape and appear to be the wrong size. A simple compression or scissoring motion will return the grill to its original length and width. Tolerances for unframed grilles are - 0˝, +1⁄8˝in width and - 0˝, +1⁄4˝ in length. Metal framed grille tolerances are - 0˝, +1⁄8˝ for both dimensions. Excess wire may be trimmed for final mounting taking care to trim sides equally to maintain symmetry. If ordered, rosettes are tack welded, “freezing” the shape. Grilles with rosettes are not adjustable.
PRESS CRIMPED
SINGLE CRIMPED
DOUBLE CRIMPED
Shown are the three basic crimp styles used in mesh weave configurations (inset shows flat wire vs round wire).Special attaching provisions for nail holes, mounting tabs or matching metal frames can be supplied. Please supply a sketch or drawing of details.
flat wire
flat wire
flat wire
ROUND WIRE.050", 3/32", 1/16"
and 1/8" diameters
SQUARE WIRE1/16" and 3/32"
REEDED WIRE(one side only)
1/16" x 1/8", 1/16" x 3/16",1/16" x 1/4", 1/16" x 5/16",
and 1/16" x 3/8"
DISTRESSED WIRE(one side only)
1/16" x 3/8" and 1/16" x 1/2"
FLAT PLAIN WIRE1/16" x 1/8", 1/16" x 3/16",1/16" x 1/4", 1/16" x 3/8",
1/16" x 1/2", and 1/16" x 3/4"
Also Available:• Expanded metal sheets• Perforated metal sheets• Wire cloth
Wire Styles & Sizes:
Mesh Weave Crimp Styles: Most wire grilles are made with steel wire and finished to customer specifi-cations. At additional cost, tempered brass wire may be substituted to resist denting and for permanency of configuration.
ARCHITECTURE & ARTI NSTITUTE OF CLASSICAL
Since 1910
Benchmark Wood Studio,
Holland, MI
Bathroom Cabinet
Style #403 flat wire, diamond
shape, with #1533 rosettes
Since 1910
Klise productsfeatured on
www.houzz.com/pro/klise
Quality ProductsProudly Made
in the U.S.A.
Contact Klise to receive our detailed custom ordering guidebook,
Specifying Guide, Decorative Custom Wood Moulding
& Decorative Custom Metalwork
Ordering information.To place an order or request a quotation, please ask for a copy of our Specifying Guide Decorative Custom Wood Moulding & Decorative Custom Metalwork or be sure to supply the following information:
• Pattern (style) number• Mesh opening size(s), wire-to-wire, center-to-center• Direction of pattern (i.e. diamond, square, etc.)• Wire size & style (round, square, flat, plain, reeded)• Electroplating and finishing effect• Number of pieces and their size(s) (overall outside dimension)• Rosettes, cones or clips & positioning• Frame width, if applicable• Rabbet width, if applicable• Submit sketch or drawing for clarification
For CUSTOM FORMED grille style #s 403, 503, 522, 525, 540, 600, 605, 660 and other custom grilles, a detailed drawing, showing all dimensions, pattern repeats, mounting tabs and rosette placement may be required.
20140910vC