10

KM3Net Project

  • Upload
    rowa

  • View
    25

  • Download
    1

Embed Size (px)

DESCRIPTION

KM3Net Project. [email protected] [email protected]. 28th KM3Net meeting. Broadcast source code. Pause Frame. Tx Pause Frame. Rx Pause Frame. Pause Frame code repository. Documentation. Broadcast Source code. - PowerPoint PPT Presentation

Citation preview

Page 2: KM3Net Project

28th KM3Net meeting

Broadcast source code.Pause Frame. Tx Pause Frame. Rx Pause Frame. Pause Frame code repository.

Documentation.

2

Page 3: KM3Net Project

Broadcast Source code

The customized SW for KM3net demonstrator is already in the repository.

• There is a Manual to start playing with it easily.

• Scripts to compile the code and configure the switch.

• Waiting for feedback from KM3net community

3

Page 4: KM3Net Project

Pause Frame.The entire pause frame is finished.

The TX is done.

The Rx is done (almost). • The mechanism has been tested.• A couple of minor suggestions from Peter are going to be

done. They will be finished before the end of the week.

4

Page 5: KM3Net Project

Pause Frame.Tx Pause frame at the on-shore station.

1- DOM 1 is sending too much traffic.2- The pause frame is triggered by the Rx port of the WRS1.3- The pause frame arrives at all the DOMs but just DOM1 will accept the request. The PF uses unicast address.

5

Page 6: KM3Net Project

Pause Frame.Rx Pause frame at the on-shore station

1- The BC Switch is sending to much traffic through the SC link.2- A DOM reception buffer exceeds the threshold . A pause frame is transmitted to the on-shore station.3- The PF arrives at the BC switch which halts the whole BC link for a limited period.

6

Page 7: KM3Net Project

Pause Frame.

Where is the Pause Frame code? It will be available before the end of the week at Valencia SVN

repository.

The gateware of the Broadcast and Level 1 switches will be

available inside the PF folder.

7

Page 8: KM3Net Project

Technical Documentation.

KM3Net_boardcast.pdf -> Details how the KM3Net WR works.

KM3Net_PauseFrame.pdf -> Details how the pause frame works and how can be configured.

KM3Net_demonstrator.pdf -> Details the setup and configuration to deploy a KM3Net demonstrator and to test it.

8

Page 9: KM3Net Project

7S tasks for KM3NetKM3Net topology requires: Gateware/Firmware modifications:

• Broadcast implementation (TX to DOMs) .• Pause frame protocol.

KM3Net demonstrator 3 network levels: o 2 SPECs as DOMs o 3 WR switches as ShoreStation network

This is our last signed task, so that we wait for your feedback and validation to upload and close the system.

9

Page 10: KM3Net Project

(+34) 958 285 024(+34) 690 962 646www.sevensols.com

C/Baza, parcela 19 Nave 3 \ P.I. Juncaril \18210 – PELIGROS – GRANADA - SPAIN

[email protected]

QUESTIONS ?

10