www.siemens.com/gamma

KNX Training with the newGamma Training Kit GTK 5.0Modular, easy and individually configurable!

The world-wide standard for home and building control

© Siemens AG 2016

2

Gamma Training Kit 5.0 Versions

The modular Gamma Training Kit GTK 5.0 consists of the versions Compact und Classic, each in a basic con-figuration. The training case Classic is also in a School version available.

If the training case Classic School is fully equipped, it is suitable for the organization of mobile KNX classes for system integrators, electrical installers and planners alike.

The training case Classic Basic offers the option to mount three additional modules individually and add also the DALI module when required.

All cases of the GTK 5.0 series are robust and build as a Trolley for a safe and easy transportation of the technique.

GTK5.0 - Compact Basic

The presentation case Compact has the outside dimensions: 500 x 400 x 310 mm.

The Basic version of the presentation case is equipped with two modules M110 and M610. Two further mo dule places are covered with M500 and can be changed individually. The DALI blind cover plate M700 can easily be replaced by the DALI function module M710.

The presentation case Compact is opened from the top and is especially designed for sales and promotors.

Gamma Training Kit 5.0

Compact Basic Classic School

Classic Basic

600 mm

310 mm

500 mm

© Siemens AG 2016

3

GTK5.0 - Classic Basic and Classic School

The training case Classic has the dimensions: 600 x 500 x 350 mm.

The Gamma Training Kit - Classic is available in a Basic and a School configuration. Both are for training purposes and are opened sidewise.

The training case Classic Basic is equipped with module M110. The training case Classic School is equipped with the modules M120, M130 and the DALI module M710. The fully equipped School version is suitable to give KNX courses for electrical installer, system integrators and electrical planner.

Room Model

The room model is the starting point in the display and operation section of the cases Compact and Clas-sic, which is controlled by the mounted function and operation modules (FOM). The room model in the Gamma Training Kit enables to show all KNX functions such as:

◾ Lighting group A & B above a meeting table ◾ Lighting group C in a meeting room ◾ Lighting D in the staircase ◾ Office room lighting E and F ◾ Blinds on four sides M1, M2, M3 and M4 ◾ wind sensor simulation ◾ Window open / closed ◾ Heating radiator ◾ Cooling element

Function and Operation Module (FOM)

In the basic configuration, the mounted FOM are defined but can be extended and exchanged with any optional FOMs. Furthermore, two to three module places are left for your own configuration. The FOM are available with installed devices or as blank ver-sions. If you order the blanc version, you have to order the requested devices separately, but the neces-sary connector cables are delivered with.

GTK5.0 - Classic Basic GTK5.0 - Classic School

© Siemens AG 2016

4

Basic configuration

The GTK5.0 - Compact Basic presents the following functions:

◾ Switching, dimming, solar protection, set value, central function

◾ Heating and cooling with room control unit UP 227 ◾ Window contact ◾ Information display and weekly schedule programs

with room control unit UP 227 ◾ KNX/IP communication ◾ Alarm function „wind“ ◾ Web visualization and application modules with sche-

duler program, scene module and logic function with the IP Control Center N 152

These devices are mounted in the GTK5.0 - Compact Basic:

◾ Power supply unit N 125/22 ◾ USB interface N 148/12 ◾ IP-Router N 146/02 ◾ IP Control Center N 152 ◾ 5-port network switch 10/100 MBit/s ◾ 3 x KNX connection sockets ◾ 2 x DALI connection sockets (prepared for DALI) ◾ Switching/dimming, plus heat & cool with N 526E02 ◾ 4 x blinds with 2 x RL 521/23 ◾ Pushbutton interface UP 220D31 ◾ Pushbutton with LED (via UP 220D31) ◾ Room control unit with display UP 227 ◾ BTM, i-system pushbutton, triple, with status LED,

white UP 223/13

Mounted FOM Optional FOM

The demo case Compact Basic comes with already mounted Module M110 and M610. The other sections are covered with M500 and M700.

The demo case Compact Basic can be extended with the following FOM: M130, M210, M310 and M410 and the DALI-Module M710.

M110 M130 M210 M710

M310 M410M610

GTK5.0 - Compact Basic

© Siemens AG 2016

5

GTK5.0 - Classic Basic

Basic configuration

The GTK5.0 - Classic Basic presents the following functions:

◾ Switching, dimming, solar protection, set value, central function

◾ Heating, cooling, window contact ◾ Information display and weekly schedule pro-

gramme with room control unit UP 227 ◾ KNX/IP communication ◾ Alarm function „wind“ ◾ Web visualisation with IP viewer N 151

In the basic configuration, these devices are mounted in the GTK5.0 - Classic Basic:

◾ Power supply unit N 125/22 ◾ USB interface N 148/12 ◾ IP-Router N 146/02 ◾ IP viewer N 151 ◾ 8-port network switch10/100 MBit/s ◾ 3 x KNX connection sockets ◾ 2 x DALI connection sockets ◾ 6 x switching/dimming, plus heat & cool

with N 526E02 ◾ 4 x blinds with 2 x RL 521/23 ◾ Pushbutton interface UP 220D31 ◾ Pushbutton with LED (via UP 220D31) ◾ Room control unit with display UP 227 ◾ BTM, i-system pushbutton, triple, with status LED,

white UP 223/13

Mounted FOM Optional FOM

The demo case Classic Basic comes with already mounted Module M110. The other sections are covered with M500 and M700.

The demo case Classic Basic can be extended with the following FOM: M130, M210, M310 and M410 and the DALI-Module M710.

M110 M130 M210 M710

M310 M410

© Siemens AG 2016

6

Basic configuration

In the GTK5.0 - Classic School presents the following functions:

◾ Switching, dimming, solar protection, set value, central function

◾ Heating, cooling, window contact ◾ Information display and weekly schedule pro-

gramme with room control unit UP 227 ◾ KNX/IP communication ◾ Alarm function „wind“ ◾ Web visualisation with IP Control Center N 152 ◾ Schedule programme, logic and application module ◾ DALI lighting control and RGB LEDs for color control ◾ Motion detector ◾ IR control / remote control ◾ Climate optimization via air quality sensor

In the basic configuration, these devices are mounted in the GTK5.0 - Classic School:

◾ Power supply unit N 125/22 ◾ USB interface N 148/12 ◾ IP-Router N 146/02 ◾ IP Control Center N 152 ◾ 8-port network switch10/100 MBit/s ◾ 3 x KNX connection sockets ◾ 2 x DALI connection sockets ◾ 6 x switching/dimming, heating,

cooling with N 526E02 ◾ 4 x blinds with 2 x RL 521/23 ◾ Pushbutton interface quadruble UP 220D31 ◾ Pushbutton with LED (via UP 220D31) ◾ Room control unit with display UP 227 ◾ KNX/DALI Gateway plus N 141/03 ◾ DALI Push button interface quadruble UP 141/71 ◾ Air quality sensor AQR2576 + 2535NNWQ ◾ Pushbutton IR with IR remote controler S 425/72

Mounted FOM Optional FOM

The demo case Classic School comes with already mounted Module M120, M130 and the DALI Module M710. The other sections are covered with M500.

The demo case Classic School can be extended with the following FOM: M210, M310 and M410.

M120 M710 M210 M310

M130 M410

GTK5.0 - Classic School

© Siemens AG 2016

7

Gamma Training Kit 5.0

Selection and ordering dataOrder details for Gamma Training Kit GTK5.0

GTK5.0 Compact Basic Classic Basic Classic School

Artikle-No. E10003-C38-5S-K0100 E10003-C38-5S-K0200 E10003-C38-5S-K0300

Mounted FOM included M110, 2 x M500, M610, M700 M110, 3 x M500, M700 M120, M130, 2 x M500, M710

Quantity

Optional Operation and Function Module (FOM)

Description Artikle-No. Quantity

Module 100 Mounting Plate quadruple*) E10003-C38-5S-M0100

Module 130 Pushbutton & Motion Detector E10003-C38-5S-M0130

Module 200 Mounting Plate double*) E10003-C38-5S-M0200

Module 210 Motion Detector E10003-C38-5S-M0210

Module 300 Mounting Plate single*) E10003-C38-5S-M0300

Modul 310 Contouch E10003-C38-5S-M0310

Modul 410 Touch Panel E10003-C38-5S-M0410

Module 500 Cover Plate E10003-C38-5S-M0500

Module 700 Cover Plate DALI E10003-C38-5S-M0700

Modul 710 DALI E10003-C38-5S-M0710

Main Line Module E20001-Y5980-P430

*) Products needs to be ordered separately, the necessary electronica parts are included.

The order for the Gamma Training Kit 5.0 and the Operation and Function Module can be placed via sales. Please inform the sales about the re-quested order article and you will receive an offer. The presentation and training cases are offered in the mentioned versions and be extanded with optional modules. Please contact your sales for further questions.

© Siemens AG 2016

www.siemens.com/gamma

Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel +41 41 724 24 24

Siemens Building Technologies Brunel House Sir William Siemens Square, Frimley Camberley Surrey, GU16 8QD United Kingdom Tel +44 1276 696000

Siemens Ltd Building Technologies Division 22/F, AIA Kowloon Tower, Landmark East 100 How Ming Street Kwun Tong, Hong Kong Tel +852 2870 7888

The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. The document contains a general product overview. Availability can vary by country. For detailed product information, please contact the company office or authorized partners.

© Siemens Switzerland Ltd, 2016 • E10003-C38-6B-K0100-7600

“We are the trusted technology partner for energy-efficient, safe and secure buildings and infrastructure.”

Our world is undergoing changes that force us to think in new ways: demographic change, urbanization, global warming and resource shortages. Maximum efficiency has top priority – and not only where energy is concerned. In addition, we need to increase comfort for the well-being of users. Also, our need for safety and security is constantly growing. For our customers, success is defined by how well they manage these challenges. Siemens has the answers.

© Siemens AG 2016