KOREA HYDRO _NUCLEAR POWERhttp://www.khnp.co.kr

* Location

*Plant flow

-primary side

-secondary side

*The role of mechanical engineering major in KHNP

KHNP also operates nuclear power plants in Kori, Yonggwang, Ulchin and Wolsong, and several hydroelectric power generation facilities in the Hangang system, providing approximately 40% of the national power supply.

-The following is a flow diagram for the principles of nuclear electric power generation viewed in a plane.

-Rearctot( 원자로 )

Transfers heat to coolant passing through the reactorby absorbing fission energy generated from nuclear fuel.

-Steam generater( 증기발생기 )

Reactor coolant pumps transport coolant that has passed through a reactor ; the coolant transfersHeat to secondary feed_water outside the steamGenerator tube bundles while it flows insideThe tube bundles.

-Reactor coolant pump( 냉각재펌프 )

Transfers heat to feed_water system of the secondary side by transporting reactor coolant, heated by the heat generated from the reactor, to steam generators.

-Pressurizer( 가압기 )

During normal operationPressurizer volume is shared; 50% water and 50% steam. The balance between steam andwater is controlled By spray nozzles and electric heaters.

The power station consists of millions of parts, and most have dual hardware and key features. Therefore, in need of a lot of mechanical engineers. Engineers design, facilities management, maintenance, and are currently working in the field of non-destructive..

In particular, the nuclear power plant so that safety is the best and excellent machine requires that you accept the following major engineers and technical training

Nucler power construction