KRISTOFFER IAN B. MANGABAN8years of HSE and QA/QC engineering experienceCurrent: HSEQ Engineer at Enova Facilities ManagementAbu Dhabi Investment Authority (ADIA) projectBachelor’s Degree in Mechatronics Engineering (Mechanical and Electronics)ISO 9001:2015 Auditor, BGAS Paint Inspection Grade 2/3,NEBOSH IGC, IOSH managing safely, Scaffolding Inspector, Basic First Aid Al Salam Street, Abu Dhabi U.A.E.Mobile No. 0566891715, 0555905937Email: mangaban_kristoffer_ian23@yahoo.comVisa status: Engineer Visa (Unlimited)Desired Position: Engineering job in QA/QC, HSE, ProjectsOil & Gas, Mechanical, Manufacturing, Fabrication, Energy, Facilities Management, Soft Services

OBJECTIVES:

Aspiring to obtain a job that offers a professional working environment and good career path that will enable me as an Engineer in providing and continually improving the quality, health, safety, environment and productivity of products, services and systems within the company.

SKILLS AND CAPABILITIES:

Exposed with standards such as ISO 9001, ISO 14001, OHSAS 18001, OSHAD / ADEHSMS (Abu Dhabi Occupational Safety and Health Centre), NEBOSH, IOSH, NFPA, EN 1808, AWS D1.1, BGAS, CSWIP 3.1, ASTM, ASME, EN, API, and DIN and Enova Facilities Management HSEQ standards.

Holds certifications such as BGAS Painting Inspection Grade 2 and 3, ISO 9001:2015 Auditor, Scaffolding Inspector, Portable Appliance Test (PAT), First Aid and IOSH managing safely.

Handles internal audit, customer and third party inspections by ensuring compliance in ISO, OSHAD, OHSAS, in-house and client standards.

Exposed in the evaluation of Service Level Agreement (SLA) and Key Performance Indicators (KPI) through regular inspections and toolbox talks to staffs.

Exposed in Hazard Identification and Risk Analysis (HIRA) and Standard Operating Procedures (SOP) Updates, Emergency Tests, coordination and assessment of Quarterly Legionella test, MSDS and COSHH analysis, provision of weekly toolbox talks plan.

Exposed in the review of Method Statement and Risk Assessment from subcontractor prior the issuance of permit to work. Experienced in the inspection of fire detection cause and effect in the facility. Exposed with silent and actual evacuation drills hosted with the client and security in coordination with the Civil Defense. Exposed with Oil & Gas customer standards such as Shell DEP, ADCO, Petrofac, Aramco, ADMA, ENOC, Schlumberger,

etc. and our company standards. Exposed in in-house, subcontracting and site inspection such as monitoring and inspection of dimensions of part, sub-

assemblies and assemblies vs the GA drawings, P&IDs, joint preparations / welding (NDT, CSWIP, AWS D1.1), surface preparations / painting, galvanizing, bolt tightening and final assembly in steel and aluminum fabrication and instrumentation and components assembly floor and site installations, inspection of material certificates and test reports and coordination of calibration of all test equipment and machines, loop & circulation check, flushing, pressure test and FAT functionality inspections.

Veteran in using CAFM system and different software applications such as Microsoft Office Applications, Adobe Photoshop, ERP / FACTS, Primavera P6, Aconex, Citrix, AX12, Picbase and Oracle.

Exposed in massive documentations such as review of specifications and provision of procedures, Contract KPI rating, preparation of Manufacturing Record Book that includes material traceability record and tracking of certifications per part no., serial and tag no., weld mapping / summary, 8D and NCR provision, root cause analysis, and provision of corrective and preventive actions and auditing internally and externally, material and certification inspection of MTC 3.1, ATEX, IEC, IP test, pressure / hydrostatic test, pump performance, flow-rate, calibration, datasheets, leak test, welding, NDT, painting, repeatability test. Provision of customer feedback and satisfaction survey tracking and chart different QA monthly reports.

Knowledgeable in using dimensional, painting and welding measurement tools / devices like welding gauges, magnetic yoke, different paint WFT and DFT gauges, blasted surface profile gauges, noise level gauge, dial, vernier and micrometer caliper,

plumb bob, spirit / water level, TMS, metric / steel ruler, pin gauge, feeler gauge, height gauge, dial gauge, thread pitch gauge, universal bevel protractor, fabrication degree protractor.

Six sigma white belt trained and capable in providing procedures and submittals such as Quality Manual / Project Quality Assurance Plan, Risk Assessment, Facilities Inspection, ITP, Method of Statement, HS&E Plan, inspection check-sheets, WPS, PQR, weld summary, Testing and Commissioning Procedure, Material Submittals, Inspection Submittals, Factory Acceptance, In-process procedures and Working Instructions and other QA/QC and ISO documentations in different projects.

Have basic knowledge in working with CNC programming, Turbo C programming and have basic knowledge on Visual Basic Programming.

Veteran in providing 8D / CLCA, QC Tools, 4M Analysis and implementation of 5S. Have knowledge in six-sigma tools such as Process Control Plan, FMEA and CPK. Knowledgeable in basic working and applications in Pneumatics, Electro pneumatics and Hydraulics. Knowledgeable in computer technology such as trouble-shooting of hardware & software problems, applications,

installations. Have basic knowledge in 2D & 3D designing using AutoCAD, Autodesk inventor, OSD designing and knows basics on

using Pro-E. Confident, fast learner, dedicated and passionate to assigned job and can easily adapt to changes. Flexible, self- motivated and with the ability to work independently and can work under minimal supervision and can work

under pressure. Capable of speaking English and Tagalog language fluently.

WORK EXPERIENCES:

Site: Abu Dhabi Investment Authority (ADIA)Company: Enova Facilities Management former MAF Dalkia (Energy and Total Facilities Management of Hard and Soft

Services)Position: QA/QC Engineer to HSEQ EngineerCompletion: January 2015 to present

Ensures overall Quality and HSE Management System related to Facilities Management of Abu Dhabi Investment Authority. Implements system to provide quality of service and a safe and healthy working environment for all staff, visitors, client and

contractors in accordance to ISO 9001, 14001, OHSAS 18001, NEBOSH, NFPA, Abu Dhabi Occupational Safety and Health Centre (OSHAD / ADEHSMS), ADIA and Enova HSEQ standards.

Ensures conformance with ADIA’s Service Level Agreement (SLA) and Key Performance Indicators (KPI) thru monitoring of CAFM system, targeting zero accident per month, statutory requirements are met and minimal quality complaints.

Responsible in liaising with client for HSEQ related activities such as cause investigation, provision of corrective and preventive actions for complaints.

Responsible in ensuring the ADIA Risk Register and Issues and Concerns log always updated with action plans and target dates.

Handles Internal and External Audits by ensuring compliance in ISO, OSHAD / ADEHSMS, ADIA and Enova HSEQ standards.

Responsible in carrying-out random incoming quality control inspection, ladder, scaffolding, safety harness, first aid kit. Responsible in the implementation of Enova Global Standard Operating Procedures (SOP) and generating of Site Specific

SOPs. Ensures regular workplace inspections have been carried out and communicated to the HSEQ Department. Develops weekly program for Toolbox talks and SOP trainings. Reviews and approves subcontractor’s method of statement, risk assessment, MSDS and COSHH. Responsible in the verification of Subcontractor’s compliance to contract SLA and KPI. Ensures all internal and contractor’s measuring tools and equipment were calibrated as per International and Local Standards. Ensures all portable appliances were PAT tested in accordance with International and Local Standards. Coordinates with the Waste Management for Hard and Soft Services. In-charge for the issuance of permit to work. Responsible for the submission of monthly HSEQ presentation, operation report, HSEQ Inspection report, HIRA and SOP

Updates, Emergency Test, coordination and assessment of Quarterly Legionella test. Responsible for the overall Quality Assurance and Quality Control of completed work orders. Provides HSEEQ induction for new employees and subcontractors.

Company: Proserv Middle East FZE (Oil & Gas Wellhead Control Systems, Chemical Injection Skid, Hydraulic Power Unit, ESD system, pressure test units)

Position: QHSE Inspector / EngineerCompletion: January 2014 to January 2015

Responsible in providing, developing, ensuring and coordinating in the over-all Quality of the company by monitoring and inspecting dimensions, assemblies as per GA and P&ID, welding verifying NDT – VT, MT, PT, UT, painting, final assembly and Incoming Materials, In-process through Route Card and stage-wise inspection for instrumentation loop check, functionality test, pressure and leak test and assembly of instruments, tagging, components, piping, tank inspections.

Handles and coordinates with clients, subcontractors and suppliers through hold point and witness point testing activities such as pressure tests, FAT, manufacturing record book and certification reviews, etc.

Responsible in carrying-out and tracking of incoming quality control Inspection at store for the parts / products namely as accumulators, solar panels, pumps with motors, solenoid valves, transmitters, gas bottles, gauges, recorders, tubes, fittings, PLCs, relays, hoses, instrument valves, control valves, tanks, frames, SS and MS / carbon steel plates, channels, pipes, flanges, stud bolts, flanges, gaskets, etc.

Maintains, reviews, coordinates and file documents and certificates per each and every material that were received as per P.O. requirements.

Coordinates with Supply Chain Management (SCM) team for NCRs for the non-conforming materials found all-over the factory.

Responsible in carrying-out stage-wise sub-contractor inspection activities for welding, visual and dimensional, water-fill, pickling and passivation and final paint inspetion.

Responsible in the provision and evaluating of QA procedures, process flow-charts and submittals such as ITP, HS&E Plan, Job Safety Analysis (JSA), Risk Assessment (RA), Project Quality Assurance Plan, WPS, PQR, weld summary, mark-ups, NDT, Painting Procedure, Pressure test, Flushing, Material Submittals and Material Certifications, Inspection Submittals, NCR and other QA/QC documentations.

Responsible in identifying quality problems and providing the company with recommended corrective and preventive actions through 8D.

Company: Sky Steel Systems L.L.C. Dubai U.A.E. (Building Maintenance Unit, Steel Fabrication and Installation)Position: HSEQ Mechanical EngineerCompletion: November 2011 to December 2013

Responsible in providing, developing, ensuring and coordinating in the over-all Quality of the company by monitoring and inspecting dimensions, welding (VT, NDT – MT, PT, UT), painting, bolt tightening and final assembly in steel and aluminum fabrication floor for the Incoming Materials, In-process, Pre-welding, Pre-galvanizing, Post-galvanizing, Painting, Functional and Final Inspection in-house and Site Installation Inspection and also safety of workers.

Responsible in providing, monitoring, auditing and evaluating of standard procedures, process flow-charts and submittals such as ITP, Method of Statement, HS&E Plan, Project Quality Assurance Plan, WPS, PQR, Painting Procedure, Final Testing / Factory Acceptance Procedure, Testing and Commissioning Procedure, Material Submittals, Inspection Submittals, NCR and other QA/QC and ISO documentations in every different projects. Uploading of the documents were through Aconex.

Raising NCRs/Observations for defects / findings and audits corrective and preventive actions. Ensuring the objectives are suitable for the project and periodically reviewed. Practice standards such as AWS D1.1, ISO 9001, 14001, IOSH, EN 1808, ASTM, EN, and DIN and other standards for Steel

Fabrication and Assembly. Ensuring development of Quality by studying contract & specification thoroughly to meet customer’s requirements and

participates in qualification of Subcontractors or Suppliers. Reviews key supplier profiles, quality plans, procedures, and ITPs. Exposed in site contractor and customer coordination installations inspections in Dubai, Qatar, Abu Dhabi, Sharjah, Ajman,

Saudi Arabia and Supplier’s coordination. Responsible in conducting Factory Acceptance Test. Responsible in identifying quality problems and providing the company with recommended corrective and preventive

actions.

Company: Phoenix Petroleum Philippines, Inc. (Oil & Gas Control Systems and Skids Section)Position: QHSE EngineerCompletion: October 2008 to October 2011

Responsible in monitoring and evaluating of standard procedures, process flow-charts and submittals such as ITP, HS&E Plan, Project Quality Assurance Plan, WPS, PQR, Painting Procedure, Material Submittals and Material Certifications, Inspection Submittals, NCR and other QA/QC documentations.

Raising NCRs/Observations for the identified findings. Responsible in providing, developing, ensuring and coordinating in the over-all Quality of the company by monitoring and

inspecting dimensions, welding verifying NDT – VT, MT, PT, UT, painting, final assembly and Incoming Materials, In-process through Route Card and stage-wise inspection for functionality test, pressure and leak test and assembly of instruments, tagging, components, pipings, tank inspections.

Responsible in identifying quality problems and providing the company with recommended corrective and preventive actions through 8D.

Have been in-charge for the evaluation and approval of 4M Variation, Special Acceptance. Implemented trouble-shooting suggestions, corrective and preventive actions for parts quality problems. Audit Suppliers and maintains weekly GENBA activity on Supplier’s site.

EDUCATIONAL BACKGROUND:

TERTIARY Bachelor of Science in Mechatronics Engineering (Mechanical + Electronics)Batangas State University, Philippines2004-2009

TRAININGS AND CERTIFICATIONS:

NEBOSH IGCAspire Middle East Training Institute Abu Dhabi U.A.E. – December 2016

Legionella TrainingEnova Facilities Management Dubai Head Office U.A.E. – October 2016

Emergency Test – People trapped in the lift, chemical spill, water leakage, small fire in the buildingAbu Dhabi Investment Authority U.A.E. – August 2016

Portable Appliance Test TrainingEnova Facilities Management Dubai Head Office U.A.E. – July 2016

ISO 9001:2015 Auditor Transition CourseBureau Veritas at Enova Facilities Management Dubai Head Office U.A.E. – March 2016

Scaffolding Installation and Inspection TrainingManlift Group (PASMA Certified) at Abu Dhabi Investment Authority U.A.E. – January 2016

First Aid TrainingEmirates Technical Study Abu Dhabi U.A.E. – October 2015

BGAS Painting Inspector Grade 2/3TWI Training & Examinations Services Worldwide, Dubai U.A.E. – October 2014

IOSH Managing SafelySky-steel Systems L.L.C., Dubai U.A.E - September 2012

WPS and PQR CertificationM.E.I.T.I., Abu Dhabi U.A.E. – June 2012

QA/QC in Manufacturing, Kaizen, Chemical Spill Response, How to use Fire Extinguishers, 8DEPSON Precision Philippines Inc. – May to June 2011

Quality Inspection Guidelines / Receiving Inspection Training & Internal Quality AuditTCP - Techlog Center Philippines - November 2009

ISO 9001, OHSAS 18001Bicutan, Taguig City Philippines – October 2009

Symposium on Electro Pneumatic and Advance PLCFesto Didactic Training Center – March 2007

ISO 9001, ISO 14001Bicutan, Taguig City Philippines – September 2006

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

___________________________________KRISTOFFER IAN B. MANGABAN