Kverneland Key parts and Accessories Product information
2012
Slide 2
Kverneland Headstock 200 For tractors up to 200 hp Main hollow
shaft 120 mm Hydraulic hoses are going through the main shaft
Gravity centre close to the tractor, different coupling
possibilities (Position drawbar, different holes in the tower) Cat.
II or III Easy handling and adjustment
Slide 3
Kverneland Headstock 300 For tractors up to 300 hp or more Main
hollow shaft 150 mm Hydraulic hoses are going through the main
shaft Gravity centre close to the tractor, different coupling
possibilities (Position Drawbar, different holes in the tower) For
ploughs up to 7-bodies Cat. III or IV Easy handling and
adjustment
Slide 4
Kverneland Mouldboards Unique Kverneland steels &
properties : 12 hours Carburising heat treatment process for
mouldboards and mouldboard parts Result in : 2 steel structures in
1. outside layer for optimum resistance (sharp as a diamond) Inside
layer offers the necessary flexibility to absorb impacts
Slide 5
Kverneland Body No. 8 56 cm Standard body for light to heavy
soils Perfect turning of the soil Low pulling force needed Working
depth: 15 28 cm. Working width: 30 50 cm Landside Mouldboard =
40
Slide 6
Universal body For light to medium soils Best working results
for high speed up to 10 km/h Less pulling force Working depth: 35
50 cm Working width: 18 - 30 cm Landside Mouldboard = 40 61 cm
Kverneland Body No. 9
Slide 7
Universal body with plastic mouldboard For wet and sticky soils
without sharp stones Less pulling force Landside Mouldboard = 46
Working depth: 18 35 cm Working width: 30 55 cm Longest lifetime in
non abrasive conditions 73 cm Kverneland Body No. 14 Light &
strong
Slide 8
Universal body For light to medium Soils Low Pulling forces
Perfect for ploughing of high residues (Maize straw) Good crumbling
Landside Mouldboard = 46 Working depth: 18 35 cm Working width: 30
55 cm Kverneland Body No. 19
Slide 9
Wide furrows = ideal for wide tyres (up to 710 mm) Low pulling
force = Lowest fuel consumption Perfect turning in heavy soils Soil
firmly packed with all stubble & weeds buried for rapid
residues breakdown Perfect from medium to heaviest conditions
Landside Mouldboard = 40 Working depth: 12 28 cm Working width: 30
60 cm Kverneland Body No. 28 Best perfomance
Slide 10
Kverneland Bodies Nr. 28 Best perfomance
Slide 11
Kverneland Fingerbody No. 30 70 cm Clever design : 4 fingers
for individual changing Minimum blockage and easy pulling (plastic
pieces behind the shin piece) Form as body No. 19 For all soils,
especially sticky/wet/stony conditions Best cleaning effect in
sticky conditions Intensive crumbling of the soil Working depth: 18
35 cm Working width: 30 55 cm Landside Mouldboard = 46
Slide 12
Kverneland Frame Induction heat-treated frame extremely robust
flexible enough Lighter than competitors (only 6.3 mm width for
Mounted ploughs and 8 mm for Semi- mounted) = Easier to pull /
lift, reduces full consumption
Slide 13
Kverneland Shear bolt protection LD beam: Shear bolt protection
with 4.200 kp release force Ideal for light to heaviest soil
conditions without stones 150 B beam: Shear bolt protection with
3.700 kp release force Ideal for light to medium soil conditions
without stones
Slide 14
Kverneland Auto-Reset beam Mechanical Leaf spring Auto-Reset
protection: release force from 640 to 1.400 kp The easiest and best
system on the market Best release characteristic : pressure lowers
after 5 cm height Quality ploughing : bodies release independently
one from the other. Easy adjustment Maintenance free
Slide 15
Kverneland Auto-Reset system : Decompression instead of extra
pressure ! Kverneland mechanical Auto-reset beam Guarantees : long
life time to the plough & tractor quality ploughing peace of
mind : troubleless system
Slide 16
Adaptable beam protections / conditions Release force of the
different leave springs packets: Standard Packet 7 Leave springs
640 kg HD Packet9 L. 900 kg XHD Packet 11 L.1.100 kg Tandem Packet
14 L. 1.400 kg Correct adjustment: 70 cm Standard HD Double