L-K INDUSTRIES unit is designed for hard-wiring and meets requirements for ASTM D4007 and ASTM D96. Available Conﬁgurations B, C, D or E tube styles 115VAC or 220VAC

Petroleum Testing Equipment suppliers

worldwide since 1930

NOW OPERATING MILLER-WEBER OF TEXAS

To set the standard for MANUFACTURING QUALITY and customer service in the PETROLEUM TESTING industry.

January, 2017 PRODUCT CATALOG

L-K INDUSTRIESDemand a higher standard.

www.lk-ind.com | 713-926-2623

Page. 2

Since 1930 we have taken great pride in building high quality products and

providing excellent customer service. Our original “Melton” centrifuge set the

standard in 1957 and continues to inspire our product development today.

We look forward to continuing the rich traditions that have made us

successful and to manufacturing the next generation of oilfield testing

supplies.

Thank you for your business.

Sincerely,

Eric R. CalderonPresident and CEOL-K Industries

www.lk-ind.com | 713-926-2623

Corrosion Test Cylinders

Gaging Accessories

Glassware Accessories

TABLE OF CO

NTEN

TS

4

5

6

7-8

CENTRIFUGES

HEATERS

Transport Centrifuge Series

Benchmark C Laboratory Centrifuge*

Benchmark S Laboratory Centrifuge

Melton Centrifuge Series

9

10-11

12

12

13

Criterion Water Bath*

TradeMark Heater Series*

Melton Heater

Hydrometer Cylinder Heater

LP Gas Corrosion Test Cylinder Heater*

GLASSWARE

14-15

16

17-18

19

Centrifuge Tubes

Standard Hydrometers

Miller-Weber Thermometers

Miller-Weber Accredited Calibration Services

ACCESSORIES

20

21

22

PACKAGES

23

24

25

25

26

27

28-29

30

31

Hauler's Package

Full BS&W Laboratory Package

24-Hour Replacement Plan

Preventive Maintenance Plan

APPENDICES

Common Product Configurations

Common Centrifuge Tube Configurations

Common Replacement Parts List

Miller-Weber Product Information

Miller-Weber Calibrations & Services

Page. 3 *Available in Class I, Division 2 configurations

www.lk-ind.com | 713-926-2623

CENTRIFU

GES

Transport Centrifuge Series

Ask About LK's 24hr Replacement Guarantee*Recommended configuration shown (see details in appendix). For pricing on other configurations,

please visit www.lk-ind.com.

The Transport Series is ideal for determining BS&W (basic sediment and water) content on crude oil haulers, per API MPMS Ch. 10.4 (and withdrawn ASTM D96). There are heated or non-heated, as well as 2 or 4-place trunnion arm configurations. The Transport centrifuges are compatible with finger (A), pear-shaped (B) or short cone (D) style tubes.

Available Configurations

A, B or D tube styles

12VDC or 115VAC2-Place or 4-Place Trunnion arm

Heated or Non-Heated

Optional LCD Displays

FEATURES BENEFITS

Rugged steel case assembly with reinforced mounting points and double insulation

Compact design

Pre-heater pocket (2 slots plus extra storage)

Bowl heater

LCD temperature display (optional)

Solid-state motor control with epoxy-coated electronics

Tachometer accessible with lid closed

Outdoor use and longer lifespan; reduced heat loss

Easy installation and maintenance

Faster sample heating

Maintain sample temperature up to 250°F

Accurate feedback of bowl temperature

No rheostat headaches; longer field life

Safe speed verification

Page. 4

Weight & Size

60 lbs, 18" x 22.5" x 12.5"

"Transport 9100"Heated Centrifuge with adjustable controls

MSRP: $2,689*

"Transport 7100"Heated Centrifuge

MSRP: $1,945*

"Transport 3100"Non-Heated Compact Centrifuge

MSRP: $1,270*

Weight & Size

65 lbs, 18”x22.5”x12.5”

Weight & Size

65 lbs, 18”x22.5”x12.5”

www.lk-ind.com | 713-926-2623

CENTRIFU

GES

Page. 5

Benchmark C Laboratory Centrifuge

Ask About Our Benchmark Maintenance Plan!*Recommended configuration shown (see details in appendix). For pricing on other configurations,


The Benchmark C (formerly known as the Benchmark 2014) is the first state-of-the-art oil centrifuge with Class I, Division 2 certification. The ETL certification allows for use in Class I, Division 2 Groups B, C and D Hazardous and Ordinary Locations. It is designed for determining BS&W content in crude oil or refined petroleum products. It meets the requirements for ASTM D4007, ASTM D1796, ASTM D2709, ASTM D2273, ASTM D91, ASTM D96 and ASTM D893. It also conforms to UL 61010-1, ANSI/ISA-STD 12.12.01, CAN/CSA C22.2 No. 213, CAN/CSA-C22.2 No. 61010.1 (2nd addition) and UL 823. The Benchmark C is ideal for installation on benchtops in laboratories or refineries using 100-mL capacity tubes. It comes with a standard 4-place trunnion arm configuration and MUST be hard-wired to maintain Class I, Division 2 certification.


B, C, D or E tube styles 120VAC or 240VAC (50-60 Hz, single phase)

FEATURES BENEFITS

High speed capability (2300 RPM)

Digital temperature control (Ambient to 200⁰F)

Integrated timer

Internal motor control

Specifically designed collars and cushions

Latching emergency stop button, motor lockout circuits and locking lid

720-watt dual heating element

Fully insulated; outer solvent-resistant, powder coating

Unmatched precision in BS&W determination

Better process control for testing heavy crude oil

Reduces variation in testing

Linear acceleration results in more consistent testing; actual (not theoretical) speed shown

Less tube breakage at higher G-forces

Prevents unsafe operation

Faster recovery

Better temperature control (prevents heat loss); sturdy and resilient

"Benchmark C" (2014)MSRP: $14,495*Includes 4 Centrifuge Tubes

Weight

110 lbs

Size

28" x 33" x 18"

Class I, Division 2

www.lk-ind.com | 713-926-2623

CENTRIFU

GES

Page. 6

Benchmark S Laboratory Centrifuge

Ask About Our Benchmark Maintenance Plan!*Recommended configuration shown (see details in appendix). For pricing on other configurations,


The Benchmark S is an economical alternative to the Benchmark C and offers features distinct from the Melton Centrifuge. It meets requirements for ASTM D4007, ASTM D1796, ASTM D2709, ASTM D2273, ASTM D91, ASTM D96 and ASTM D893. It is designed for determining BS&W content in crude oil or refined petroleum at locations without Class I, Division 2 requirements. The Benchmark S is optimal for laboratory settings or refineries using 100-mL capacity tubes and preferably installed on benchtops. It comes with a standard 4-place trunnion arm configuration. The unit may be hard-wired or a power cord may be purchased separately from L-K Industries.


B, C, D or E tube styles 120VAC or 240VAC (50-60 Hz, single phase)

FEATURES BENEFITS

Variable speed motor with LCD Display and electronicbraking

Manual temperature control (Ambient to 200⁰F)

Integrated timer

Specifically designed collars, shields and cushions

Latching emergency stop button and locking lid

Fully insulated; outer solvent-resistant, powder coating

Reach speeds up to 2000 rpm; controlled stops

Real-time adjustment; better process control

Reduces variation in testing

Less tube breakage at higher G-forces

Prevents unsafe operation

Better temperature control (prevents heat loss); sturdy and resilient

"Benchmark S"MSRP: $8,500*

Weight

110 lbs

Size

28" x 33" x 18"

www.lk-ind.com | 713-926-2623

CENTRIFU

GES

Page. 7

Melton Centrifuge Series – Setting the standard since 1957

*Recommended configuration shown (see details in appendix). For pricing on other configurations, please visit www.lk-ind.com.

The Melton Centrifuge is a one-of-a-kind hallmark in the industry. It helped set the oil testing industry standard with its launch in 1957 and transformed L-K Industries into what it is today. It is ideal for outdoor, corrosive environments such as offshore platforms. The unit has separate motor and heat switches and a hand brake. This unit is designed for hard-wiring and meets requirements for ASTM D4007 and ASTM D96.


B, C, D or E tube styles 115VAC or 220VAC

FEATURES BENEFITS

Robust construction with steel case

Constant speed motor

Built-in tachometer

Integrated, electric heated cups

Can be used outdoors and/or in harsh environments

Less process variation

Accurate, direct, mechanical speed readings

Direct, optimal heat transfer to test samples

MeltonMSRP: $6,400*

Weight

150 lb

Size

27” x 27” x 26”

Melton

www.lk-ind.com | 713-926-2623

CENTRIFU

GES

Page. 8

*Hand-crank centrifuge also available for light duty work.

The Mini-Melton Centrifuge is a condensed, portable version of the long-standing, dependable Melton Centrifuge. It is also a significant safety upgrade compared to the unenclosed Hand-Crank Centrifuge. It is a 2-place, unheated unit designed for finger (A) style tubes. It can easily plug into a 12VDC connection (i.e. cigarette lighter). It is ideal for chemical technicians, field operators, biodiesel techs or sales representatives using non-commercial or personal vehicles.

FEATURES BENEFITS

12VDC adaptable

Constant speed motor

Enclosed case

Compact and light-weight

Easily powered in any personal vehicle

Less process variation

Increased operator safety

Easy storage in tool box, trunk or office desktop

Mini-MeltonMSRP: $599*

Weight

18 lb

Size

16” x 16” x 16”

Mini-Melton*

www.lk-ind.com | 713-926-2623

Class I, Division 2

HEATERS

Page. 9

Criterion Water Bath

The Criterion Water Bath Heater distributes 900 watts of heating power and uses water to transfer heat. The unit is designed to provide precise heating of solvents and samples prior to use in a centrifuge or other equipment in a laboratory setting. It can accommodate two 1-gallon bottles of solvent, 14 Long Cone (C) centrifuge tubes, 14 Capillary (E) tubes or 12 Short Cone (D) style tubes. The unit is certified by ETL (Electrical Testing Laboratory) for Class I, Division 2, indoor use and is rated for Group A, B, C and D Hazardous and Ordinary Locations (Pollution Degree 2). It meets the requirements of UL 61010-1, ANSI/ISA-STD 12.12.01, CAN/CSA C22.2 No. 213 and CAN/CSA-C22.2 No. 61010.1 (2nd addition). Due to these certifications, the unit requires hard-wiring.

FEATURES BENEFITS

Digital, programmable temperature control with resistive heating element

Accommodates two 1-gal solvent bottles

Accommodates 14 C/E or 12 D style tubes

Modular top with hinged lid

Fully-insulated

Optimally designed unit size

Stainless-steel tub

Maintain selected temperature with high accuracy for extended periods

Enables efficient rotation of heated solvent samples

Optimal tube capacity means less down time

Versatility of lab configurations; minimizes evaporation

Reduces heat loss

Reduces corrosion and makes bath more robust

Comfortably fits under standard fume hood

14-Place “C” or “E” Tubes12-place “D” TubesMSRP: $3,610*

2-Place, 1-Gallon BottlesMSRP: $3,610*

Weight

30 lbs

Size

26” x 16” x 18”

Weight

30 lbs

Size

26” x 16” x 18”


C, D or E tube styles 1-gal bottle size 110VAC or 220VAC (single phase, 50/60 Hz)

Full system available with purchase discount.*Recommended configuration shown (see details in appendix). For pricing on other configurations,


www.lk-ind.com | 713-926-2623

HEATERS

Page. 10

TradeMark Heater Series

MSRP: $2,200*

FEATURES BENEFITS

Insulated body

Adjustable temperature with LCD display and RTD feedback

Aluminum dry bath

Efficient heating; reduction of heat loss

Versatility for multiple applications; prevents

Less corrosive operation; heat transferred directly to tubes

The TradeMark Heater is a 250-watt, dry block unit ideal for use on a laboratory benchtop. It is certified for Class I, Division 2 locations and rated for Groups A, B, C and D Hazardous and Ordinary Locations (Pollution Degree 2). It meets the requirements of UL 61010-1, ANSI/ISA-STD 12.12.01, CAN/CSA C22.2 No. 213 and CAN/CSA-C22.2 No. 61010.1 (2nd addition). Due to these certifications, the unit requires hard-wiring. It also meets the requirements for ASTM D130, ASTM D4814-04B and ASTM D7671-10. The unit is designed to provide precise heating of solvents and crude oil samples prior to use in a centrifuge or other equipment. The digital programmable temperature controller is adjustable from 72°F to 250°F.

Size

9” x 11½” x 12¾”

Weight

28 lbs

Class I, Division 2

TradeMark Heater


A, B, C or D tube styles 110VAC or 220VAC (50/60 Hz)

www.lk-ind.com | 713-926-2623

HEATERS

Page. 11

The Refined Fuel Test Cylinder Heater is a variant of the TradeMark series – it is also Class I, Division 2 certified and conforms to the corresponding TradeMark standards. It is used to prepare samples for the ASTM and NGPA silver strip corrosion testing of engine fuels. The unit MUST be hard-wired. It pairs with the Fuel Corrosion Test Cylinder and is ideal for laboratory benchtops.

Refined Fuel Test Cylinder Heater

FEATURES BENEFITS

Insulated body


Dry bath

Efficient heating; reduction of heat loss

Versatility for multiple applications; prevents runaway heating

Less corrosive operation; heat transferred directly to tubes

Size

9” x 11½” x 12¾”

Weight

28 lbs


110VAC or 220VAC

*Recommended configuration shown (see details in appendix). For pricing on other configurations, please visit www.lk-ind.com.

Refined Fuel Test Cylinder HeaterMSRP: $2,200

www.lk-ind.com | 713-926-2623

HEATERS

Page. 12

The Melton Heater is an explosion-resistant unit ideal for laboratory settings. The 4 or 8-place tray is compatible with long cone (C) and short cone (D) style tubes and available in 115VAC or 220VAC. The Melton Heater is designed for hard-wiring; thus, a power cord is not included.

FEATURES BENEFITS

Intrinsically safe

Robust construction

Preset temperature

Worry-free operation

Durability; less down time

Repeatability; ideal

temperature maintained

Size

C-8: 12⅞” x 14¼” x 7⅞”D-4: 8” x 8⅜” x 8”

Weight

32 lbs

Available Configurations:

12VDC or 115VAC


115VAC or 220VAC

MSRP: $1,025

Melton Heater

MSRP: $42.50

Pyrex innercylinder

The Hydrometer Cylinder Heater is available in 115VAC with thermostatic control or with a 12VDC rheostat control. The units include a Pyrex inner cylinder.

Hydrometer Cylinder Heater

Heatedhydrometer cylinderMSRP: $811.50

FEATURES BENEFITS

User controlled temperature

Custom design

Testing versatility

Fits Pyrex cylinder

Weight

12 lbs

Size

14"x 14"x 14"

www.lk-ind.com | 713-926-2623

HEATERS

Page. 13

LP Gas Corrosion Test Cylinder Heater

FEATURES BENEFITS

Explosion resistant


Solid aluminum block

Assured safety

Verified accuracy; prevents runaway heating

Uniform heat transfer

The LP Gas Corrosion Test Cylinder Heater is used to prepare samples for the ASTM and NGPA copper strip corrosion testing of liquefied petroleum gas. It is certified for Class I, Division 2 locations and rated for Groups A, B, C and D Hazardous and Ordinary Locations (Pollution Degree 2). It meets the requirements of UL 61010-1, ANSI/ISA-STD 12.12.01, CAN/CSA C22.2 No. 213 and CAN/CSA-C22.2 No. 61010.1 (2nd addition). Due to these certifications, the unit requires hard-wiring. It is designed specially to pair with the LP Gas Corrosion Test Cylinder in laboratory settings.

Size

10⅝” x 14⅛” x 12½”

Weight

28 lbs

Class I, Division 2


12VDC, 110VAC or 220VAC Non-certified (not Class I, Division 2)

LP Gas Corrosion Test Cylinder HeaterMSRP: $2,200

www.lk-ind.com | 713-926-2623

GLASSW

ARE

Page. 14

*Long cone (C) tubes are ~8” long and short cone (D) tubes are ~6⅜” long. **Pricing shown is for recommended configurations. Complete price list is available in the appendix. Except for finger

(A) tubes, which have a 12.5-ml capacity, all other tubes have a 100-ml capacity.

Centrifuge Tubes

Finger (A)

MSRP: $15Used with hand-crank or Mini-Melton

Pear-Shaped (B)

MSRP: $60**Extended capillary tip for accurate readings

Long Cone (C)*

MSRP: $92**Laboratory settings (Benchmark models)

Short Cone (D)*

MSRP: $39**Transport models with limited space

Capillary (E)

MSRP: $77**Best for refined fuel products

Can be used in regulatory environments

Unmatched accuracy

Higher visibility and longer life

Hand-labeling tubes in field or laboratory

Specific to customer needs & traceable

Short lead times

Durability; high-speed capability

Conforms to ASTM & API standards

ISO/IEC 17025 calibrations

Permanently etched, yellow markings

Sand spot

Customizable & serialized

Manufactured in-house

Wide-thread, thick-wall configurations

FEATURES BENEFITS

All L-K Industries centrifuge tubes are made in-house. Tubes are calibrated volumetrically in the manufacturing facility or gravimetrically in our onsite ISO/IEC 17025 accredited laboratory. With innovations such as 2-mm wall thickness and wide-neck threads, L-K Industries can take pride in being a market front-runner in glassware.

Tube Types:

Applicable Standards:

API 2542Applicable Standards:

API 2542, ASTMD96/API 10.4


ASTM D4007/API 10.3ASTM D96/API 10.4


ASTM D4007/API 10.3ASTM D96/API 10.4


ASTM D2709

Available Configurations: A, B, C, D, E tube styles Wide-neck or standard threads 100-ml or 200% markings

Standard or detailed markingsISO/IEC 17025 calibration

www.lk-ind.com | 713-926-2623

Available Markings: GLASSW

ARE

Cork Wide-Neck Twist Cap Rubber Stopper Stantard Twist Cap

Cork Tool Top Wide-Neck Threaded Rubber TooledTop

Stantard Threaded

Page. 15

Centrifuge Tubes

*All tubes shown are tooled top. Standard tubes have detailed markings up to 10-ml (20%) mark; detailed tubes have detailed markings up to 100-ml (200%) mark.

Available Tops & Threads:

Tips & Definitions:

When using 100-ml tubes, ADD the BS&W volume of two separate samples to account for dilution

When using 200% tubes, take the AVERAGE of two sample tubes

Certified – marked tubes are gravimetrically calibrated by an accredited laboratory

Verified – marked tubes are volumetrically checked in-house (factory)

Non-verified – marked tubes sold directly to the customer off the production line without verification

Standard 100-ml*

Detailed100-ml*

Standard200%*

Detailed200%*

Please see the Appendix for most common tube con�gurations.

www.lk-ind.com | 713-926-2623

Page. 16

Standard HydrometersL-K Industries API hydrometers have multiple ranges that are precision grade. Hydrometers are available with a thermometer inside the center and with or without certification. Non-mercury hydrometers are available as well. All hydrometers are designed to be used with the Hydrometer Cylinder Heater.

Common Hydrometer Types:

Hydrometer Type Part # Size Weight (lb) Price

Non-Certified, 0.1 Div, API Range (9 to 21)




















16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

16.5x5x1.5

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

S10-1001

S10-1002

S10-1003

S10-1004

S10-1005

S10-1006

S10-1007

S10-1008

S10-1009

S10-1010

S10-3000

S10-3001

S10-3002

S10-3003

S10-3004

S10-3005

S10-3006

S10-3007

S10-3008

S10-3009

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

www.lk-ind.com | 713-926-2623

Page. 17

Miller-Weber ThermometersL-K Industries opened its newly accredited ISO/IEC 17025 Laboratory in the summer of 2016 after acquiring Miller & Weber, Inc. Now operating as Miller-Weber of Texas, our highly trained technical staff is manufacturing thermometers and other glassware, and performing instrument calibrations in-house. Each thermometer is handblown, individually engraved, etched and calibrated for total immersion per NIST and ISO standards. Certification is available upon request, as well as refill thermometers. The following table shows our most popular thermometers. See the Appendix for more details on these thermometers.

Best Sellers

Part # Price

T-3330/CT60

T-3426S/120FPY

T-3426S/BT/124FPY

T-3502S/230F1

T-3750/63C

T-3750/63CFC

T-3750/63F

T-3750/63FFC

T-3750/12C

T-3750/12F

T-3750/58FYLCT

T-3750/58FYLNT

T-3750/59CYLCT

$24.81

$77.33

$77.73

$83.00

$79.86

$145.84

$79.86

$145.84

$38.86

$38.86

$24.94

$24.94

$24.94

Part # Price

T-3750/59FYLBT

T-3750/59FYLCT

T-3750/59FYLNT

T-3950/S18F

T-3950/S62CFC

T-3950/S63C

T-3950/S63CFC

T-3950/S63F

T-3950/S63FFC

T-3950/S64C

T-3950/S64CFC

T-3950/S64F

T-3950/S64FFC

$24.94

$24.94

$24.94

$53.16

$214.15

$125.29

$194.27

$125.29

$194.27

$166.83

$255.03

$166.83

$255.03

Part # Price

T-3970S/S230FT

T-4580

T-7502SFC/230F1

T-SPECC7/135C1

T-SPECC9/20CS1

T-SPECF18/160F1

T-SPECF2/110FS1

S10-5000

S10-5001

S10-5002

S10-5100N

S10-5101N

S10-5102N

$41.81

$34.24

$163.71

$63.38

$25.76

$61.01

Inquire

$41.00

$41.00

$41.00

$23.00

$23.00

$23.00

www.lk-ind.com | 713-926-2623

Page. 18

Miller-Weber Thermometers

PerformaThermTM

The PerformaThermTM series thermometers have precise tolerances, low uncertainty and quick response times (like mercury) that meet ASTM standards. The blue liquid is a patented, safe alternative to mercury and traditional spirit liquids, and the dark color is easy to read. They are available in complete sets or individually, and with a NIST-traceable, ISO/IEC 17025 accredited Report of Calibration. See the Appendix for more details on these thermometers.

EnviraThermTM

The EnviraTherm™ series is a precision alternative to traditional spirit thermometers and common laboratory thermometers. The liquid is non-toxic, non-hazardous and biodegradable and is offered in an easy to read purple color. Please visit www.lk-ind.com for more details on these thermometers.

Typical Comparisons: 12" -20/110°C, 1°, Total Immersion Thermometer*

*Other spirit thermometers are available. Please visit www.lk-ind.com for more information.

Tolerance

Uncertainty (Over Range)

Response Time

PerformaTherm®

Mercury

±0.1°C

±0.05°C

<3 min

±0.1°C

±0.05°C

<3 min

EnviraTherm™

TraditionalSpirit

±1.0°C

±0.5°C

3-15 min

±2.0°C

±0.5°C

Up to 15 min

www.lk-ind.com | 713-926-2623

Page. 19

Miller-Weber Accredited Calibration Services

Miller-Weber has focused on accreditation and conforming to relevant industry standards to ensure that customers have a high level of confidence in all calibrations performed. The ISO/IEC 17025 Calibration Laboratory is housed in the Houston manufacturing facility and offers calibration services for thermometers, hydrometers and centrifuge tubes.

Thermometer Calibration*

*Prices indicated are per point tested and include pre-calibration examination of the instrument

*Prices indicated are per point tested and include pre-calibration examination of the instrument

Calibration Order Forms are available at www.lk-ind.com.

Range Price

From -80 to -40 °C

From -112 to -40 °F

From > -40 to < 0 °C

From > -40 to < 32 °F

From 0 to 100 °C

From 32 to 212 °F

From > 100 to 200 °C

From > 212 to 392 °F

From > 200 to 300 °C

From > 392 to 572 °F

From > 300 to 400 °C

From > 572 to 752 °F

Special Test

$100.00

$100.00

$ 75.00

$ 75.00

$ 55.00

$ 55.00

$ 65.00

$ 65.00

$ 85.00

$ 85.00

$130.00

$130.00

By Quotation

Hydrometer Calibration*

Range Price

From 0.624 to 1.910 SG and equivalent in other scales

Base Price for Calibration of Digital Densitometer

Special Test for Hydrometer or Densitometer

$50.00

$150.00

By Quotation

Miscellaneous Charges

Service Price

Duplicate Report of Calibration

Teflon® Encapsulation (by length)

Instrument Found Ineligible for Test (without Replacement Instrument Ordered)

Etched in Serial Number (thermometer)

$25.00

$1.75/inch

$50.00

$25.00

Key Attributes

Established traceability of measurement standards and measuring instruments to the International System of Units (SI) by means of an unbroken chain of calibrations linking them to relevant primary standards of the SI units of measurement.

Application of procedures to estimate uncertainty of measurement for all calibrations performed and the assurance that calibration uncertainties are sufficiently small so that adequacy of measurement is not affected.

ASTM Fellow on staff as the Laboratory Technical Manager

An unblemished track-record with zero findings in the laboratory’s history.

www.lk-ind.com | 713-926-2623

ACCESSORIES

Page. 20

Corrosion Test Cylinders

LP Gas Corrosion Test CylinderThe LP Gas Corrosion Test Cylinder is designed especially for conducting ASTM and NGPA copper strip corrosion tests of liquefied petroleum gas. It conforms to ASTM D1838 and NPGA Publication 2140 standards. It is compatible with the L-K Industries LP Gas Corrosion Test Cylinder Heater.

Refined Fuel Corrosion Test CylinderThe Refined Fuel Corrosion Test Cylinder is used for ASTM and NGPA silver strip corrosion tests of engine fuel. It is compatible with the L-K Industries Refined Fuel Corrosion Test Cylinder Heater and in compliance with industry standard ASTM 7671. Each cylinder is precision-machined from stainless-steel for non-corrosive product applications. It is design tested to 3000 psi.

FEATURES BENEFITS

All stainless-steel construction

No tools necessary

Easy-to-replace O-ring seal

Durability and long life

Can be used anywhere

Less down time

LP Gas Corrosion Test CylinderMSRP: $430

Fuel Corrosion Test CylinderMSRP: $325

Ideal for

Copper Strip Testing (ASTM D1838)

Ideal for

Silver Strip Testing (ASTM 7671)

www.lk-ind.com | 713-926-2623

ACCESSORIES

Page. 21

*Pricing shown is for recommended configurations. Complete price list is available in the appendix.

Gaging Accessories

Lufkin Gage TapeMSRP: $189.50

Oil ThiefMSRP: $446

Aluminum Gager's TrayMSRP: $173

US Tape Gage TapeMSRP: $109.50

L-K Industries offers Gage tapes from Lufkin and US Tape. Units feature heavy gage construction, a snap swivel hook, and folding handle. Various lengths available. Certified units available on request.

The oil thief has an adjustable trip rod and adjustable tension. All cylinders are graduated. Custom configurations are available upon request.

Trays, ropes, plumb bobs and other miscellaneous accessories available online or by contacting L-K Industries directly.

www.lk-ind.com | 713-926-2623

ACCESSORIES

Page. 22

Glassware Accessories

Cushion and Collar Package(Includes 6 Benchmark cushions and collars)

MSRP: $50

Tooled Top Accessory Package (Includes 12 stoppers & 3 brushes)

MSRP: $50

Wideneck Accessory Package (Includes 6 caps & 3 brushes)

MSRP: $50

RacksMSRP:$29

Cushion Replacement Package (Includes 12 cushions)

MSRP: $50

To see all of LK's accessories, please visit www.lk-ind.comor contact LK directly.

www.lk-ind.com | 713-926-2623

PACKAGE D

EALS

Page. 23

Hauler's Package Perfect for New Trucks

MSRP: $3,066

Package: $2,750

Transport 7100 Centrifuge Typical Gaging Supplies

Description

25-foot gage line

Plumb bob

Little Joe Tape Wiper

Pocket Thermometer

Oil Thief/ 2 Petcocks 6" & 10"

25-foot thief rope

Gager's Tray

Centrifuge Tubes (6/box)

Brush to clean tubes

Woodback Complete

25-foot Woodback rope

3-Place Hydrometer Case

29 to 41 API Range Hydrometer

39 to 51 API Range Hydrometer

49 to 61 APR Range Hydrometer

500 ML Hydrometer Cylinder

Water Finding Paste, 3oz. tube

Ideal for

New Trucks

www.lk-ind.com | 713-926-2623

PACKAGE D

EALS

Page. 24

"Benchmark C" (2014)

Centrifuge Model LB-14-C120C Centrifuge Model LB-14-D120C

Centrifuge Tubes (12 Tubes)

Model S10CWTHDFV15 Model S10DWTHDFV15

Criterion Water Bath System

Water Bath Model WB-T2/ T14C Water Bath Model WB-T2/ T14D

Full BS&W Laboratory Package Perfect for New Lab Configurations

MSRP: $17,250 (C) or $16,999 (D)

Criterion Water Bath Heater SystemClass 1, Division 2, Certified Factory Verified

Benchmark C CentrifugeClass 1, Division 2, Certified

Wide-thread tubes

Available Options:

www.lk-ind.com | 713-926-2623

SERVICE PLANS

Page. 25

24 Hour Replacement Plan

This package is offered on Benchmark Series centrifuges.

Price: $399 per year.

This package is offered with LK’s Transport Series centrifuges.

Price: $199 per year.

Designed to meet the needs of oil haulers, customers who purchase this plan are guaranteed to have aReplacement centrifuge delivered to them anywhere in the continental US within 24 hours. Should the L-K unit break or stop working for any reason, simply contact L-K Industries and a replacement will be sent. A return-shipping label will also be included for sending the damaged unit back.

Preventative Maintenance Plan

Designed to meet the standards of lab users, customers who purchase this plan will have annualMaintenance performed on their centrifuge. A detailed list of the services performed is noted below. AllWork will be done on the client’s site at a prearranged date and time.

Bulk Glassware Pricing

Volume-based, tiered pricing is available at a discount when glassware (tubes, thermometers, etc.) are purchased in bulk. Please inquire at [email protected] or 713-926-2623.

Service Includes

Diagnostic checks, clean, & recalibrate

Validate RPM readings

Validate temperature

Clean unit

Cosmetic touch-up

Operational validation

Integrity test

Balance validation

www.lk-ind.com | 713-926-2623

APPEND

IX- Recom

mended Products

Page. 26

PRODUCT RECOMMENDED CONFIGURATION PRICE

Transport Series

Transport Series

Transport Series

Benchmark Series

Melton

Light DutyCentrifuge

Criterion WaterBath

TradeMark Heater

Melton Heater

Transport Heater

HydrometerCylinder Heater

Gage Tape

Gage Tape

Oil Thief

“9100” 2 Place, 12V, D-Model, Heated,Digital Readouts

“7100” 2 Place, 12V, D-Model, Heated

“3100” 2 Place, 12V, D-Model

120V, C-Model

115V, D-Model

Mini-Melton, A-Model

14 Place, C/E-Model

115 VAC, D-Model

115 VAC, C-Model

12 VDC, D-Model

115 VAC

Lufkin, 25ft, Complete Unit

US Tape, 25ft, Complete Unit

Protek, 16inch, 2 Petcocks

$2,689.00

$1,945.00

$1,270.00

$14,495.00

$6,400.00

$599.00

$3,610.00

$2,200.00

$1,025.00

$450.00

$811.50

$189.50

$189.50

$446.00

Appendix A: Common Product Configurations

www.lk-ind.com | 713-926-2623

APPEND

IX- Recom

mended Products

Page. 27

PRODUCT UNIT PRICE PRICE

S10AW

S10B

S10B2

S12EFV15

S12E2FV15

S12CFV15

S12CAV15

S12C2FV15

S12C2AV15

S12CWTHDFV15

S12C2WTHDFV15

S10D

S10D2

S12D

S12D2

S10DWTHDFV15

S10D2WTHDFV15

S12DWTHDFV15

S12D2WTHDFV15

S12EAV15

S12E2AV15

S12EWTHDFV15

S12E2WTHDFV15

$15.00

$60.00

$60.00

$75.00

$75.00

$63.00

$93.00

$63.00

$93.00

$92.00

$92.00

$39.00

$39.00

$60.00

$60.00

$71.00

$71.00

$85.00

$85.00

$110.00

$110.00

$109.00

$109.00

Finger Tubes (A)

Pear Shaped (B)

Pear Shaped (B)

Pear Shaped (B)

Pear Shaped (B)

Long Cone 8 in (C)

Long Cone 8 in (C)

Long Cone 8 in (C)

Long Cone 8 in (C)

Long Cone 8 in (C)

Long Cone 8 in (C)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Short Cone 6 in (D)

Capillary 8 in (E)

Capillary 8 in (E)

Capillary 8 in (E)

Capillary 8 in (E)

TOP

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Threaded

Threaded

Tooled Top

Tooled Top

Tooled Top

Tooled Top

Threaded

Threaded

Threaded

Threaded

Tooled Top

Tooled Top

Threaded

Threaded

THREAD

Wide Neck

Wide Neck

Wide Neck

Wide Neck

Wide Neck

Wide Neck

Wide Neck

Wide Neck

Appendix B: Common Centrifuge Tube Configurations

*For a full list of tube configurations, please visit www.lk-ind.com.

www.lk-ind.com | 713-926-2623

APPEND

IX- Recom

mend Products

Page. 28

DESCRIPTION PART #

Motor Control Circuit Board

Shields

Cushions

Motor

Preheater Thermostat 1

Preheater Thermostat 2

Bowl Thermostat

Preheater Assembly

Relay

3-Position Switch (for Preheater)

2-Position Switch (for Bowl Heater)

J-124-LKREV5

J-292

J-051

J-099S

J-218

J-214

J-329

J-333-7100

J-240

J-204

J-202

Appendix C: Common Replacement Parts List

Transport 7100 Centrifuge

DESCRIPTION PART #

Motor Control Circuit Board

Shields

Cushions

Motor

Relay

2-Position Switch (for Bowl Heater)

LCD Display

Sensor

Temperature Controller

J-124-LKREV5

J-292

J-051

J-099S

J-240

J-202

J-285

J-286

J-282

Transport 9100 Centrifuge

www.lk-ind.com | 713-926-2623

APPEND

IX- Replacem

ent Parts

Page. 29

DESCRIPTION PART #

Short Cone (D) Shields

Short Cone (D) Cushions

Long Cone (C) Shields

Long Cone (C) Cushions

Brake Pad

Tachometer

Tachometer Driver

Motor Switch

J-066

J-051

J-065

J-050

J-170

J-071

J-072

J-146

Appendix C: Common Replacement Parts List

Melton Centrifuge

DESCRIPTION PART #

Short Cone (D) Shields

Short Cone (D) Cushions

Short Cone (D) Collars

Long Cone (C) Shields

Long Cone (C) Cushions

Long Cone (C) Collars

LAB-177

J-051

LAB-182

LAB-008X

LAB-176

LAB-175

Benchmark C Centrifuge

www.lk-ind.com | 713-926-2623

APPEND

IX- Recom

mended Products

Page. 30

PART # THERMOMETER TYPE

S10-5000

S10-5001

S10-5002

S10-5100N

S10-5101N

S10-5102N

Non-Certified, Woodback, -30 - 120°F

Non-Certified, Woodback, 0 - 180°F

Non-Certified, Woodback, 20 - 220°F

Non-Certified, Standard, -30 - 120°F

Non-Certified, Standard, 0 - 180°F

Non-Certified, Standard, 20 - 220°F

Appendix D: Miller-Weber Product Information

Best-Selling Standard Thermometers

PART #

T-3950/S62C*

T-3950/S62F*

T-3950/S63C*

T-3950/S63F*

T-3950/S64C*

T-3950/S64F*

T-3950/S65C*

T-3950/S65F*

T-3950/S66C*

T-3950/S66F*

T-3950/S18F***

T-3970S/S230FT***

ASTM #

S62C

S62F

S63C

S63F

S64C

S64F

S65C

S65F

S66C

S66F

N/A

N/A

RANGE

-38 to +2°C

-36 to + 35°F

-8 to 32°C

18 to 89°F

25 to 55°C **

77 to 131°F **

50 to 80°C **

122 to 176°F **

75 to 105°C **

167 to 221°F **

94 to 108°F

0 to 230°F

DIVISIONS

0.1°C

0.2°F

0.1°C

0.2°F

0.1°C

0.2°F

0.1°C

0.2°F

0.1°C

0.2°F

0.2°F

1°F

Best-Selling PerformaThermTM Thermometers

*Made in strict accordance with ASTM E2251.**Thermometer has auxiliary ice point.***Non-ASTM Thermometer

For all other thermometer ranges, please contact [email protected] or 713-926-2623.

www.lk-ind.com | 713-926-2623

APPEND

IX- Calibration Services

Page. 31

Appendix E: Miller-Weber Calibration & Services

Temperature

Density

Gravimetric Calibration

Rotational Speed

Range: -80 to 405°C

Range: 0.6250 to 1.910 Relative Density (SG)

Up to 100 ml

Up to 6,000 rpm

Scope of Accreditation for Miller-Weber of Texas Calibration Laboratory:

Official Standards & Accreditations:

ISO/IEC 17025:2005 (E) ANSI/NCSL Z540-1-1994

ALM RED: www.almred.comAmarillo Thermo King: www.amarillotk.com

Amazon: www.amazon.comAyalytical Instruments: www.ayalytical.com

Cole-Parmer: www.coleparmer.comDC Scientific: www.dcscientific.com

Grainger: www.grainger.comParkes Scientific: www.parkesscientific.com

6952 Lawndale StreetHouston, TX 77023

Phone: 713-926-2623Fax: 713-926-7736

Website: www.lk-ind.comEmail: [email protected]

Catalog © 2016 L-K Industries

All Rights Reserved

L-K INDUSTRIES

IS PROUD TO WORK WITH

Documents

L-K INDUSTRIES unit is designed for hard-wiring and meets requirements for ASTM D4007 and ASTM D96. Available Conﬁgurations B, C, D or E tube styles 115VAC or 220VAC