Upload
malcolm-richardson
View
237
Download
7
Embed Size (px)
DESCRIPTION
Flywheel Cont. Install plastic flywheel fins. Make sure it is in the correct position.
Citation preview
LAB #8
Flywheel and Key
• Insert the flywheel key into the slot on the crankshaft then instert the flywheel.
Flywheel Cont.
• Install plastic flywheel fins. Make sure it is in the correct position.
Flywheel Cup and Nut
• Insert the flywheel cup.• Insert the flywheel Nut.• Torque to 60 FOOT pounds of torque.
Tighten the Flywheel Break
• Using a pair of pliers connect the spring from the flywheel break.
• Before install the armature CAREFULLY connect the wire on the back of the armature. Leaving the spark plug wire intact.
Ignition Coil• Using a 10mm socket insert the bolt holding
on the armature. We will torque it and set the gap when we put the second bolt in.