Labfriend spring 2013 specials

Lab Specia ls

LLG-Gloves Nitril

Lab Glass 2

Lab-Accessories 3

Occupational safety 4-5

Measuring devices 6-7

Balances 8-9

Stirrers/Vortexers 10-11

Shakers/Mixers 12-13

Samplers 14

Mills/Homogenisers 15

Filter papers 16

Jointed glassware 17

Centrifuges and accessories 18

Ice makers 19

Thermostats 20-21

Liquid handling 22-23

Pumps 24-26

Spectrophotometers 24

Vacuumpumps 26

Lab-Accessories 27-28

Block heaters 28

Chromatography 29-31

Cryogenic box Work2Store™ 32

Lab Specials Spring

Valid until 31.12.2013

Highlights of thenew Catalogue!

Detailed description page 5

CAT III

- good value- maximum dexterity- tough

Lab Glass 2

For more articles see our Laboratory Catalogue from page 13,58, 59, 1137 onwards

Beakers, DURAN®, low form

DIN 12331. ISO 3819. With easy-to-read scale and large labelling field foreasy marking. Highly durable white ceramic. Due to the wall thickness, it issuitable for use as a heating vessel. Glass Type I/neutral as per USP, EP andJP. With retrace code (Batch Identification, for all) except 5ml, 10ml and 25ml.Certificate available via the Internet. Autoclavable.

Capacity Diam. Height PK Cat. No. Price Now

ml mm mm AUD AUD10*2550100150250400600800100020003000500010000*/**

2634425060708090

100105132152170217

355060708095

110125135145185210270350

11111111111111

9.013 0089.013 0149.013 0179.013 0249.013 0299.013 0369.013 0419.013 0489.013 0539.013 0549.013 0639.013 0689.013 0739.013 086

9.008.008.006.788.007.368.85

10.9716.0017.4630.5055.1493.56

251.60

8.007.007.006.007.006.008.00

10.0015.0016.0027.0050.0087.00

239.00* Without graduations.** Not to DIN and ISO.

up to -19%

Draining Rack, ABS

Laboratory space is always in high demand. Scienceware® Lab-Aire® II DryingRacks are a practical solution for drying and storing fragile, frequently usedlabware. Benchtop Dryers lets you place your dryer wherever it will be mostconvenient and a sturdy base provides excellent balance and support.Wallmount dryers keep labware off the bench and out of the way as it dries.Easily installs on walls or standard pegboard using molded-in tabs with keyhole openings. Hardware not included.- Rugged ABS plastic will never corrode and easily wipes clean- Drip/storage trays have scalloped wells to hold long thin labware- 3 different sizes of pegs can be moved and repositioned to hold a variety of labware including beakers, flasks, bottles, test tubes and cylinders

- With drain- Wallmount possible (9.003 301, 9.003 303, 9.003 304)Rods76 mm

Rods310 mm

Rods127 mm

Width Height Depth PK Cat. No. Price Now

Quantity Quantity Quantity mm mm mm AUD AUD612181218

714211421

612181218

375375375375375

240390594417570

127178127127178

11111

9.003 3019.003 3029.003 3039.003 3049.003 306

149.00247.00249.00202.00314.00

140.00240.00235.00195.00295.00

up to -6%

9.003 301 9.003 306

Laboratory bottles Borosilicate glass 3.3,GL 45, with retrace code

Borosilicate glass 3.3. DIN 168 - 1. EN ISO 4796-1.With graduations and retrace code, pouring ring, PP screw cap and ISO thread.

Capacity Ext.diam.

Height PK Cat. No. Price Now

ml mm mm AUD AUD1002505001000200050001000020000

567086

101136186234299

100138176225260330410505

1010101010111

9.072 3319.072 3329.072 3349.072 3359.072 3369.072 3379.072 3386.802 824

27.0030.0036.0060.00

116.0061.00

133.00240.00

26.0029.0035.0058.00

112.0059.00

129.00234.00

up to -4%

9.072 334

LLG Safety Nets

LLG safety nets from polyethylene for covering glass containers. Cut to sizewith scissors. Package contains 5m.

Description Colour For dia. PK Cat. No. Price Now

mm AUD AUDLLG Safety Nets, rollLLG Safety Nets, rollLLG Safety Nets, rollLLG Safety Nets, rollLLG Safety Nets, rollLLG Safety Nets, roll

redblueyellowgreenredyellow

6 - 1512 - 2520 - 4030 - 6050 - 10090 - 200

111111

6.258 9966.510 8496.050 1316.050 1326.050 1336.079 513

15.0019.0025.0028.0032.0043.00

14.0018.0024.0027.0031.0042.00

up to -7%

L A B W A R E

®

www.LabFriend.com.au

Free Call: 1300 848 065

Lab-Accessories3

For more articles see our Laboratory Catalogue from page 42,49, 162, 247, 872 onwards

Graduated cylinders, PP, with handle

The large handle provides a secure grip for safer, more controlled andconvenient pouring. A double scale is accurate and easy to read. The widehexagonal base prevents tip over and rolling on the benchtop. One litre andtwo litre sizes.- Steam autoclavable at 121°C

Capacity PK Cat. No. Price Now

ml AUD AUD10002000

11

7.638 7389.274 870

44.0086.00

41.0081.00

up to -7%

LLG-Laboratory jack, stainless steel

Length Width Min. height

Max. height

Max. load

PK Cat. No. Price Now

mm mm mm mm kg AUD AUD200 200 90 320 25 1 9.117 220 213.00 206.00

-3%

LLG-Buckets white with lid, PP

For transport, packaging and storage of foodstuffs, building materials and non-corrosive chemicals.Stability guaranteed when filling up with material up to 80°C.

Capacity PK Cat. No. Price

Litres AUD123510

11111

9.040 0309.040 0319.040 0329.040 0339.040 034

2.002.002.002.003.00

Sample containers, PS, with metal cap,sterile

Ideal for sample collection and storage. Made of virgin polystyrene. Allmaterials are non-cytotoxic. For In Vitro use only. CE Marked in accordancewith the European Directive 98/79/CE. The metal cap with inert PVC-Linerensures leak proof seal.


ml AUD AUD60100250

30020050

9.070 3219.070 3229.070 323

97.00112.0050.00

94.00109.00

49.00

up to -3%

9.070 321 9.070 322

Biohazard disposal bags, PP, 50µm

Biohazard disposal bags, super strength- maximum protection against dangerous tears and leaks- Material: blended polymer- Color: red-orange- Print: standard biohazard warning symbol and precautionary procedures in four languages: English, French, German and Spanish

- With pre-printed sterilization indicator patch, which darkens when bag is autoclaved

- Can be autoclaved at 121°C.

Description Size PK Cat. No. Price Now

AUD AUDBiohazard, 38µmBiohazard, 38µmBiohazard, 38µmBiohazard, 38µmBiohazard, 38µmBiohazard, 50µmBiohazard, 50µmBiohazard, 50µmBiohazard, 50µmBiohazard, 50µm

360 x 480mm480 x 580mm640 x 890mm790 x 970mm970 x 1220mm360 x 480mm480 x 580mm640 x 890mm790 x 960mm940 x 1220mm

200200200200100200200200200100

6.240 4659.404 0106.301 6376.253 0969.404 0119.404 0129.404 0136.253 0926.253 0939.404 014

185.00269.00395.00518.00400.00232.00338.00644.00817.00614.00

179.00260.00385.00505.00390.00225.00329.00625.00795.00595.00

-3%

L A B W A R E

®

L A B W A R E

®

Occupational safety 4

For more articles see our Laboratory Catalogue from page 86,201, 224 onwards

Chemical protection glove DermaShield®

Made of poly-chloroprene, DermaShield® is the most technically advancedsterile glove available today. Free of latex, proteins and accelerators, itminimises both Type I and Type IV allergies associated with natural rubber.While DermaShield® has the comfort and flexibility of natural rubber gloves,at a similarly competitive price, its neoprene composition offers betterchemical resistance. And the new beaded cuff prevents the glove from rollingdown, providing increased protection. DermaShield®: for optimal product andworker protection. Pack size: 1 pair.The DermaShield® is sterile and specifically adapted to critical environmentsISO 5 (Class 100 & GMP AB).AQL 0.65 (EN374) - Ideal Application - Handling of cytostaticsCat. III

EN 374 EN 374 EN 421

Size PK Cat. No. Price Now

AUD AUDGr. 6Gr. 6 ½Gr. 7Gr. 7 ½Gr. 8Gr. 8 ½Gr. 9

1111111

9.006 3067.635 0867.635 0879.006 3077.635 0889.006 3087.635 089

5.675.675.675.675.675.675.67

5.005.005.005.005.005.005.00

-12%

Half-Masks silv-Air c

- highest safety (certified according EN149)- anatomical design and soft material-edges avoid bruising to the face- compatible with safety spectacles because of the safe optimised nose-area- seamless, continuous headband for comfortable and secure mask fit- innovative shape-optimised design - completely metal free- foldable shape with V-shape-seam for perfect adaption to the facial structure

Respiratory half-mask FFP1- protection against contaminates up to 4 x OEL- easy to differentiate by colour coding (blue - FFP1)

Respiratory half-mask FFP2- protection against contaminates up to 10 x OEL- easy to differentiate by colour coding (orange - FFP2)

Respiratory half-mask FFP 3- protection against contaminates up to 30 x OEL- easy to differentiate by colour coding (black - FFP3)- circulatory venting via the soft edges prevents fogging of safety spectacles

Color: white

Type Description PK Cat. No. Price Now

AUD AUD21002110220022102220231031003110320032103310

FFP1FFP1 with exhale valveFFP2FFP2 with exhale valveFFP2 with exhale valve and carbon filter*FFP3 with exhale valveFFP 1, foldableFFP 1, foldable, with exhale valveFFP 2, foldableFFP 2, foldable, with exhale valveFFP 3, foldable, with exhale valve

2015201515153015301515

9.005 7509.005 7519.005 7529.005 7539.005 7549.005 7559.005 7569.005 7579.005 7589.005 7599.005 761

37.0042.0045.0045.0068.00

103.0049.0036.0058.0041.00

100.00

33.0038.0040.0040.0060.0095.0047.0035.0055.0039.0097.00

up to -12%

9.005 753

*silver


Free Call: 1300 848 065

5


Occupational safety

EN 374 EN 374 EN 420

CAT. III

-7%Size PK Cat. No. Price Now

AUD AUDSMLXL

200200200180

9.006 3719.006 3729.006 3739.006 374

15.0015.0015.0015.00

14.0014.0014.0014.00

LLG-Gloves ergo, Nitril, powder-free

Safety container with viewing stripe, PE-HD, with UN-approval

Electroconductive container for a safe collection and transportation offlammable solvents and solvent waste.The clear viewing stripe allows a permanent control of the solvent level.Also available as set with safety funnel with ball valve.

Description Capacity Thread Dimensions(W x D x H)


litres S mm AUD AUDCanisterSet Canister with funnel

1010

9090

195 x 400 x 195195 x 630 x 195

11

6.251 5939.042 899

194.00429.00

188.00415.00

-3%

Glove box holder, PS, anti-microbial

Ideal for use in cleanroom, hospitals, and microbiological work areas.MICROBAN® additive prevents growth of moulds and bacteria. High impact,durable resin is resistant to harsh cleaning solutions. The versatile glove boxholder can accommodate single box or adjoined together to hold multipleboxes. Modular design allows stacking horizontally. Screws and anchorsprovided.

Dimensions(W x D x H)


mm AUD AUD254 x 156 x 97 1 9.005 427 42.00 41.00

-2%

L A B W A R E

®

Disposable gloves made of nitrile with a tried and tested design for usesrequiring very good tactile properties combined with high resistance.According to EN 420.

- Thin - comfortable to wear- Tried and tested quality product made of nitrile - excellent resistance to skin

irritants in foodstuffs- More resilience through special formulation and greater wall thickness- For single use in applications with an increased need for safety when

handling chemicals- Free from phthalates/softeners and allergenic latex proteins- Easy to don and particularly skin-friendly through special finishing process- Signal colour blue - suitable for areas subject to HACCP standardsCat. III Low Chemical resistant

Glove shape flat with rolled edge (ambidextrous)Material nitrileColour blueOutside texturedInside powder-free halogenatedSize/total length S, M, L, XL med. 240 mmThickness/measured in single layer 0.13 mm

Measuring devices 6


LLG Electrolyte solutions, KCL

Potassium chloride electrolyte for pH electrodes - Filling solution for referenceelectrolyte.

Type PK Cat. No. Price Now

AUD AUD3mol/l, 1000ml3mol/l, 250ml3mol/l, (AgCl saturated.), 250ml

111

9.041 3709.041 3719.041 372

22.009.00

13.00

21.008.00

12.00

up to -12%

LLG-Buffer solution

Tested and certified at 20°C. Provided with label that gives the pH value atdifferent temperatures. Tolerance ±0.02 pH. Supplied in PE-HD containers.Traceable to NIST (SRM). Temperature dependence data is printed on the labelas well as batch numbers and expiry dates. Buffers have a 24 month shelf lifefrom date of manufacture.

pH-value

Capacity Buffer PK Cat. No. Price Now

at 20 °C ml AUD AUD4.00 ±0.027.00 ±0.0210.00 ±0.02

100010001000

citratephosphateborate

111

9.041 3679.041 3689.041 369

9.009.009.00

8.008.008.00

-11%

Laboratory instrument inoLab® Multi 9310 IDS


AUD AUDMulti 9310Multi 9310 Set 1Multi 9310 Set 2Multi 9310 Set 3Multi 9310 Set 4Multi 9310 Set CMulti 9310 Set KMulti 9310P*Multi 9310P Set 1*Multi 9310P Set 2*Multi 9310P Set 3*Multi 9310P Set 4*Multi 9310P Set C*Multi 9310P Set K*

11111111111111

9.920 1209.920 1219.920 1229.920 1239.920 1249.920 1259.920 1269.920 1279.920 1289.920 1299.920 1309.920 1319.920 1329.920 133

1,231.001,502.001,534.001,776.002,186.002,047.003,032.001,726.001,997.002,029.002,272.002,681.002,542.003,527.00

1,193.001,456.001,481.001,721.002,097.001,989.002,897.001,675.001,945.001,976.002,204.002,608.002,456.003,432.00

up to -4%

*Meter with integrated printer

The Multi 9310 IDS features a new technology: No longer has the meter determining the parameter but only the sensor. Intelligent, digital IDS sensorspromotes the inoLab® Multi 9310 IDS to a perfect all-rounder. The universal digital input is ready for all available laboratory IDS sensors. No matterwhether pH, conductivity or dissolved oxygen, when plugged into a suitable sensor the inoLab® Multi 9310 becomes either a pH, conductivity or dissolvedoxygen meter. Of course it has a modern backlit graphic display with menu-controlled user interface for easy and intuitive operation. The mini USB-Binterface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing andthe keypad are easy-to-clean. An integrated thermal printer (58mm width) is ready for printout of the measured data (option). Includes meter, powersupply, stand and USB cable.

SpecificationsDisplay: backlit graphic LCDMemory: manual: 500/automatic: 5000Logger: manual/time controlledInterface: Mini USB-BPower supply: Universal power supply, 100 to 240 V, 50/60 Hz, 4 x 1.5

V AA or 4 x 1.2 V NiMH

Single instrumentIncl. SenTix® 940Incl. SenTix® 980Incl. TetraCon®925Incl. FDO® 925Incl. SenTix® 940, TetraCon® 925Incl. SenTix® 980, FDO® 925 and TetraCon® 925Single instrumentIncl. SenTix® 940Incl. SenTix® 980Incl. TetraCon®925Incl. FDO® 925Incl. SenTix® 940, TetraCon® 925Incl. SenTix® 980, FDO® 925 and TetraCon® 925


Free Call: 1300 848 065

Melting point and density measurement7

For more articles see our Laboratory Catalogue from page 410,1268 onwards

LLG-Melting point apparatus


AUD AUDMPM-H2MPM-HV2

Visual measuring / magnifierVisual or automatical measuring withprinter

11

9.208 1209.208 121

1,289.001,939.00

1,238.001,857.00

Density meter Densito 30PX


AUD AUDDensito 30PXDensity standards (6mL), 10-piece set with certificate

11

9.947 5509.947 551

3,017.0084.00

2,895.0080.00

up to -5%

L A B W A R E

®

Ideal for determination of the melting point of powders and substances that donot have a clear transparent melting point.

Both models have the following properties:- Digital temperature control- Sample can be monitored through a magnifying glass with integrated light- For capillaries with 1.4mm outer diameter- Automatic fan cooling that activates to cool off the device after completion of

the measurement- Text display of error messages- Keyboard covered with foil for easy cleaning- With operating instructions in German and English; brief instructions right at

the device- With integrated printer for saving space (only HV2)

H2 for visual, semi-automatic measurement with magnifying glass,without printer:In this model, the melting point is determined visually and then saved bypushing the "Save" key.

HV2 for visual measurement with magnifying glass or automaticmeasurement, with printer:Either fully automatic or visual measurements, 1 sample each.With this version, you can specify whether you want to observe the meltingprocess through the magnifying glass or have the melting point determinedautomatically after the pre-set starting temperature is reached (indicated bysound signal).

The scope of delivery contains 100 melting point determination capillaries anda device protection hood. Refill pack melting point tubes for LLG-Melting pointapparatus please order Cat. No. 9.208 131.

SpecificationsMeasuring range: 25.0°C to 360.0°CResolution: 0.1°CAccuracy: ±0.5°C (+25°C to +200°C)

±0.5% of measured value °C (rem.measuring range)

Heating rate at fast heating: to 200°C, approx. 4 minto 350°C, approx. 8 min

Heating rate when measuring: 1°C/minMagnifying glass: 10xLighting: 2 x LEDDimensions (WxDxH): 230mm x 220mm x 315mmDimensions capillaries: 1.4mm x 80mmWeight: 4.5kgPower supply: 115-230V, 50Hz -4%

- Wide range of applications- Easy to use: take a sample and read the final result- Results within seconds displayed in the unit of your choice- Choice of temperature correction coefficient before each measurement- Intuitive user guidance and plain language display- Clearly visible measuring cell- External sample tip/external syringe connection for high viscosity samples

Supplied with: Protective case, density standards, cleaning tissues,instruction manual, flasks for cleaning solution, batteries, LabX® direct DE/REdata transfer software for data collection and manipulation.

Specitications0 to 2g/cm³Density measuring

range:Resolution: 0.0001g/cm³Accuracy:Measuring units: Density, relative density, density temperature

compensated, relative density temperature compensated,Brix %, alcohol (gravity-%, volume-%, US Proof and UKProof), Baumé, Plato, API (scales A, B and D),%sulphuric acid (gravitypercents), user-defined units

Temperature: 0 to 40°CMeasuring range: 0.1°CResolution: either in °C or °FCalibration: with dry air and pure water or other density standardsData storage: storage space for up to 1100 resultsDisplay: Matrix-LCD with background lightingInterface: Infrared, protocol selectable (IrDA or RS232C)

Balances 8


Balances, electronic, analytical, "Precise" ABT series

Analytical and semi-microbalances which are suitable for verification.All models have automatic calibration adjustment function by internal, motor-driven, calibration weight. It ispossible to log ISO/GLP-compliant weighing or calibration data at any time via an accessory printer (not supplied) or data interface (bi-directional RS232-C).Additionally, the balances have formulation, piece counting and percentage determination functions, as well as aflush-mounted weighing platform. All models are supplied with a modern, all-glass draught shield with slidingdoors to the left, right and top.Also available with DKD certified, calibration weight, ionizer, thermal printer, statistic printer at additional cost.

Single-cell advanced technology:- Fully automatic manufactured weighing cell from one piece of material- Stable temperature behaviour- Short stabilisation time: Steady weight values within approx. 5 sec under laboratory conditions- Shock proof construction- High corner load performance

Weighing pan, stainless steel: 80mm dia.Weighing chamber (WxDxH): 168 x 172 x 223mmDimensions (WxDxH): 217 x 356 x 338mmMains adapter: 220V

Type Weighingrange

Readability

Reproducibility

Linearity Platediam.


g mg ± mg ± mg mm AUD AUDABT 120-4MABT 220-4MABT 320-4MABT 100-5MABT 120-5DMABT 220-5DM

12022032010142 / 12082 / 220

0.10.10.10.010.01 / 0.10.01 / 0.1

0.10.10.10.050.02 / 0.10.05 / 0.1

0.20.20.3

0.150.05 / 0.20.1 / 0.2

808080808080

111111

9.900 9559.900 9569.900 9576.241 2749.900 9589.900 959

1,630.001,878.002,102.002,161.002,350.002,586.00

1,550.001,785.001,997.002,053.002,235.002,455.00

-5%

-3%

Precision balance "Precise" Type PBS/PBJ

- only PBJ: Automatic internal adjustment in case of a change in temperatureor time-controlled at defined intervals

- Metal housing: robust and sturdy- Large backlit, LCD display, digit height 14 mm- Dosage aid: High-stability mode and other settings can be selected- Weighing with tolerance range (checkweighting): Input of an upper/lower limit value. A visual signal assists

with portion division, dispensing or grading- Totalizing of individual weighing results- Identification number: 4 numeric positions, printed on calibration protocol- Automatic data output to the PC/printer every time the balance is steady- Draft shield standard, on all models with readout d = 0.001 g, weighing space (WxDxH): 180 x 193 x 87mm

Single-cell advanced technology:- Fully automatic manufactured weighing cell from one piece of material- Stable temperature behaviour- Short stabilisation time: 3 sec- Shock proof construction- High corner load performance

SpecificationsOverall dimensions, without draft shield (WxDxH): 209 x 322 x 78mmDimensions weighing space (WxDxH): 180 x 193 x 87mmPermissible ambient temperature: 10°C/30°CWeight: approx. 3kg

Type Readability Capacity Reproduci-bility

Linearity Platedimensions


g g ± g ± g mm AUD AUDPBS 620-3MPBS 4200-2MPBS 6200-2MPBJ 620-3MPBJ 4200-2MPBJ 6200-2MPBJ 8200-1M

0.0010.010.01

0.001001

0.010.1

62042006200620

420062008200

0.0010.010.01

0.0010.010.010.1

0.0020.020.02

0.0020.020.020.2

108 x 105170 x 180170 x 180108 x 105170 x 180170 x 180170 x 180

1111111

7.657 8896.255 6119.901 4457.910 1286.245 0386.236 7196.257 002

1,465.001,228.001,542.001,677.001,559.001,807.001,441.00

1,421.001,187.001,496.001,621.001,512.001,761.001,397.00

6.255 611

7.910 128


Free Call: 1300 848 065

Balances9


Anti-vibration platform, Vibrasorb

For absorbing and damping vibrations down to 16Hz. Comprises of a mouldedterazzo slab supported on four vibration absorbers with non-slip feet. Suitablefor isolating sensitive analytical instruments such as balances andmicroscopes. Will support up to 16kg.

Width Depth Height Weight PK Cat. No. Price Now

mm mm mm kg AUD AUD350450

350560

7676

1939

11

9.941 6009.951 600

1,067.001,408.00

1,025.001,350.00

-4%

LLG-Aluminium weighing dish

Aluminium foil, for sample handling. With a flanged, crimped wall for rigidity.Finger-tab handle can be etched for identification prior to weighing (Notincluded on Cat. No. 6.236 854). Made from oil-free, lightweight aluminium.

Diam. Height PK Cat. No. Price Now

mm mm AUD AUD435770101

1214168

10010010050

6.238 1386.238 1396.238 1406.236 854

9.0010.0012.5713.00

8.009.00

12.0012.00

up to -11%

Weighing Papers

Nitrogen free for a very smooth surface and good sample recoveryStrong enough to support dense material

Dimensions(D x W)


mm AUD AUD76102152

xxx

76102152

500500500

9.059 0169.059 0179.059 018

41.0059.00

118.00

40.0058.00

115.00

up to -3%

Analytical and Precision Balances Explorer®

Type Capacity Readability Platedimensions


g mm AUD AUDEX224EX623EX6202EX10202EX6201

220620

6200102006200

0.1 mg1 mg

0.01 g0.01 g0.1 g

Ø 90Ø 130

180 x 210180 x 210180 x 210

11111

9.902 3719.902 3789.902 3849.902 3859.902 387

3,687.003,482.003,482.004,098.002,198.00

3,395.003,394.003,394.003,978.002,113.00

up to -8%

L A B W A R E

®

Highest performance, most technically advanced balance from OHAUS- High resolution multi-lingual colour VGA touch display with icons for simpleoperation

- Programmable multi-functional touch-free sensors for cleanliness, speed andsafety

- Multiple application modes plus library for storage of personal applicationsettings

- EC Type approved versions also available (models ending with M)

Application: Weighing (17 units + custom units), Parts Counting, %weighing, Animal/Dynamic Weighing, Checkweighing, Filling, Totalization,Formulation, Differential weighing, Density determination, Peak hold,Ingredient costing, Pipette adjustment, Gross/Net/Tare Weighing

Display: High resolution 14.5cm (diagonal) full colour VGA touch displayincluding QWERTY and numeric key pads plus weighing capacity indicationOperation: Mains OperationCommunication: Easy access communication ports (USB, RS232) plus 3rdcommunication port slot (Ethernet or 2nd RS232). GLP and GMP including dateand time, Direct Data TransferConstruction: Metal base, ABS top housing, stainless steel pan, glassdraftshield with flip-top, replaceable in-use cover

Design features: 3-door draftshield with removable panels on 0.1mg and1mg models with draftshield light. Modular display design with adjustableangle(attach to base, wall or optional tower). AutoCal automatic internal calibration.Level assist feature with illuminated level indicator. Selectable environmentaland auto-print settings. Integral weigh below hook. Protective in-use cover.Software lock switch

Stirrers 10


Magnetic stirrers RH basic/digital


AUD AUDRH basicRH basic whiteRH digitalRH digital white

1111

9.720 4119.720 4179.720 4149.720 418

689.00728.00710.00742.00

669.00708.00688.00721.00

-3%

9.720 411

Type Connector PK Cat. No. Price Now

AUD AUDEUUKCHEUEU

11111

9.730 0606.251 9396.235 6846.252 8236.242 793

387.00672.00387.00817.00828.00

375.00643.00375.00797.00795.00

up to -4%

9.730 060

Robust and reliable shakers for speedy mixing and shaking of samples.Multiple accessories: e.g. adapter tops for test tubes, beakers, centrifugetubes etc. Adapter tops can be changed easily with the snap fit system.

Vortex-Genie® 2Variable speed for precise mixing from gentle to vigorous. Broad range ofattachments for most tubes, plates and other containers. Hands-Free or TouchOn control.

Vortex-Genie® 2T with an integrated timerTimer function: (Touch On) 1-60 seconds, (Hands-Free) 1-60 minutes orcontinuous. Unit automatically stops at the end of user programmed time.

Digital Vortex-Genie 2 with digital control and display of speed andtimeDigital display provides accuracy, reproducibility and repeatability. Timerfunction: (Touch On) 1-99 seconds, (Hands-Free) 1-99 minutes or continuous.Specially configured unit for Applied Biosystems protocol available.

Specifications Vortex-Genie® 2/Vortex-Genie®

2T/Digital Vortex-Genie® 2Shaking movement: circularSpeed display/Timer: Scale/No/Scale/Scale/Digital/DigitalSpeed range: 600 - 2700rpm/600 - 2700rpm/500 -

2850rpmTimerInterval operation: -/1 to 60s/1 to 99sHands-free mode: -/1 to 60min/1 to 99minDimensions (L x W x H): 165 x 122 x 165mmPermissible ambient conditions: 0 to 38°C at 95% rhWeight: 4kgPower supply: 230V, 50/60Hz

Vortex Genie® 2Vortex Genie® 2Vortex Genie® 2Vortex-Genie® 2TDigital Vortex-Genie® 2

Vortex-Genie®-series

Newly designed, economic magnetic stirrer with heating. High heat output of600 watts and the steel-copper compound hot plate ensures rapid heating.Adjustable safety temperature from 50 to 370°C.

- Soft-start stirring motor- Includes M 10 thread for a support rod- Strong magnetic field and wide speed range for volumes up to 15 litres

RH digital only:Bushing according to DIN 12878 for connecting an electronic contactthermometer, such as the ETS-D5. Highly accurate temperature control ispossible with the sensor placed directly in the medium.- Digital display of temperature and speed- Error code display- Easy operation with touch keypad

RH basic white/RH digital white with chemically resistant hot plate.

SpecificationsMax. stirring quantity (H2O): 15lMotor rating input/output: 15/2WSpeed range: 50 to 2000rpmSpeed display RH basic: scaleSpeed display RH digital: LEDHeat output: 600WHeating rate (1l H2O): 6K/minTemperature range min./max. 50 to 320°CSetting accuracy RH digital: ±5KAdjustable safety circuit min./max.: 50 to 370°CConnection for ext. temp. sensor: DIN 12878Control accuracy with sensor: ±1KETS-D5: ±0.5KETS-D6: ±0.2KSet-up plate: Stainless steel 1.4301,

diam. 135mmDimensions (WxDxH): 160 x 246 x 90mmWeight: 2kgProtection class acc. to DIN EN 60529: IP 21Power supply: 220-240V, 50/60Hz


Free Call: 1300 848 065

Stirrers11

For more articles see our Laboratory Catalogue from page 447onwards

Overhead stirrer EUROSTAR 40 digital


AUD AUDEUROSTAR 40 digital 1 9.816 697 1,275.00 1,249.00

-2%

Overhead stirrer EUROSTAR 60 digital/60control


AUD AUDEUROSTAR 60 digitalEUROSTAR 60 control

11

9.816 7009.816 703

1,414.001,958.00

1,387.001,898.00

up to -3%

9.816 700 9.816 703

Universal laboratory stirrer designed for simple stirring tasks for quantities upto 25l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 to 2000rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed ismaintained and variations are adjusted automatically. This guarantees aconstant speed even with changes in viscosities of the sample.

EUROSTAR 40 digital:- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation- Slim casing- Quiet operation- Error code display

SpecificationsStirring quantity max. (H2O): 25lMax. viscosity: 30000mPasMotor rating input/output: 112/87WSpeed range: 0/30 to 2000rpmMax. torque at stirring shaft: 40NcmDisplay: LEDChuck range: 0.5 to 10mmDimensions (WxDxH): 86 x 208 x 248mmProtection class DIN EN 60529: IP 40Power supply: 230V, 50/60Hz

Universally used strong laboratory stirrer for quantities up to 40l (H2O). Itautomatically adjusts the speed through microprocessor controlled technologywithin the speed range of 0/30 to 2000rpm. Safety circuits installed ensuresautomatic cut-off in an anti-stall or overload conditions. Continuouscomparison of shaft speed to desired speed is maintained and variations areadjusted automatically. This guarantees a constant speed even with changes inviscosities of the sample.

EUROSTAR 60 digital:- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation- Slim casing- Quiet operation- Error code display

EUROSTAR 60 control additionally:- Multilingual TFT display- Programmable functions- Integrated temperature measurement- Interval operation- Timer function- Adjustable safety circuit- Locked function

SpecificationsStirring quantity max. (H2O): 40lMax. viscosity: 50000mPasMotor rating input/output: 168/131WSpeed range: 0/30 to 2000rpmMax. torque at stirring shaft: 60NcmDisplay 60 digital: LEDDisplay 60 control: TFTChuck range: 0.5 to 10mmDimensions (WxDxH) 60 digital: 86 x 208 x 248mmDimensions (WxDxH) 60 control: 86 x 230 x 267mmProtection class DIN EN 60529: IP 40Power supply: 230V, 50/60HzEUROSTAR 60 control only:Temperature measurement: PT 1000Temperature measuring range: -10 to +350°C

Shakers 12


Rocking shaker Rocker 2D basic


AUD AUDRocker 2D basic 1 9.729 984 773.00 756.00

-2%

Rocking shaker Rocker 3D digital


AUD AUDRocker 3D digital 1 9.729 987 1,027.00 995.00

-3%

Rocking shaker with fixed speed for smooth mixing tasks. For homogeneousmixing in flasks, culture flasks, Petri dishes and tubes. Even with load andvoltage fluctuations the shaking speed remains constant. A fixed tilt angleensures reproducible test results.

- Different attachments allow a variety of applications- Usable at 4 to 50°C in incubators- Anti-slip rubber mat included- Easy operation by foil keypad- Suitable for continuous operation

SpecificationsType of movement: rockingShaking diameter: 8° (angle)Permissible shaking weight (incl. attachment): 2kgMotor rating input/output: 16/9WSpeed: 5 to 80rpmSpeed display: 7 segment LEDDimensions (WxDxH): 280 x 330 x 150mmWeight: 2.2kgProtection class acc. to DIN EN 60529: IP 21Power supply: 100-240V, 50/60Hz

Shaker with three-dimensional tumbling motion and a fixed speed for smoothmixing tasks. For homogeneous mixing in flasks, culture flasks, Petri dishesand tubes. Ideal for e.g. the cultivation of cell cultures, DNA extractions,distributing of cells and staining and destaining of cells. Even with load andvoltage fluctuations the shaking speed remains constant. A fixed angle ensuresreproducible test results.

- Different attachments allow a variety of applications- Usable at 4 to 50°C in incubators- Anti-slip rubber mat included- Easy operation by foil keypad- Suitable for continuous operation- Timer: Countdown, adjustable from 1s to 99h 59min- Counter: Display of shaking time- Error code display

SpecificationsType of movement: tumblingShaking diameter: 0 - 15° (angle)Permissible shaking weight (incl. attachment): 2kgMotor rating input/output: 16/9WSpeed Rocker 3D digital: 5 to 80rpmSpeed display (Rocker 3D digital only): 7 segment LEDDimensions (WxDxH) Rocker 3D digital: 280 x 330 x 185mmWeight: 2.2kgProtection class acc. to DIN EN 60529: IP 21Power supply: 100-240V, 50/60Hz


Free Call: 1300 848 065

9.729 973

Shakers and Mixers13


Tube roller Roller 6 basic/6 digital/10basic/10 digital

Type Rollers Dimensions(W x D x H)

Rotationspeed

Loadmax.


mm rpm kg AUD AUDRoller 6 basicRoller 6 digitalRoller 10 basicRoller 10 digital

66

1010

240 x 545 x 115240 x 545 x 115380 x 545 x 115380 x 545 x 115

30 (fixed)5 - 8030 (fixed)5 - 80

2.02.02.02.0

1111

9.729 9709.729 9719.729 9729.729 973

1,324.001,491.001,641.001,808.00

1,278.001,445.001,598.001,745.00

-3%

9.729 970

Rotator Genie™


AUD AUDSI-2204 incl. magnetic platform, EU plug 1 6.254 273 1,339.00 1,298.00SI-2110SI-2210SI-1123

SI-1124

SI-1125

SI-1120

SI-1121

SI-1122

SI-1134SI-1135

SI-1136

Standard platform with bandsMagnetic platform1 Clip plate for 12 tubes, 10mm to 13mm*1 Clip plate for 6 tubes, 15mm to 17mm*1 Clip plate for 3 tubes, 28mm to 30mm*6 Clip plate for 12 tubes, 10mm to 13mm*6 Clip plate for 6 tubes, 15mm to 17mm*6 Clip plate for 3 tubes, 28mm to 30mm*2 Universal clip plates1 Magnetic microtube box, 100 places**1 Clip plate for volumetric flasks, 100ml

ahb

c

d

b

c

d

ef

g

111

1

1

6

6

6

21

1

9.730 1049.730 1149.730 105

9.730 106

9.730 107

9.730 108

9.730 109

9.730 110

9.730 1119.730 112

9.730 113

248.00243.0049.00

49.00

49.00

229.00

229.00

229.00

97.00103.00

74.00

243.00235.00

47.00

47.00

47.00

221.00

221.00

221.00

94.00100.00

71.00

*Platform capacity: 12 Clip plates, **Platform capacity: 8 boxes

up to -4%Type

Roller shaker with 6 or 10 rolls, with smooth rocking and rolling action and afixed speed. Particularly for mixing blood samples, solid and liquid suspensionsand viscous samples. The unit can be used for all conventional tubes andcylindrical bottles. The easy removable rolls allow simple and quick cleaning ofthe unit from spilled samples.

- Usable from 4 to 50°C in incubators- Suitable for continuous operation- Removable rolls make it suitable for larger tubes- Easy operation by foil keypad- Easy removable rolls

Roller 6 digital/10 digital only:- Timer: Countdown, adjustable from 1s to 99h 59min- Counter: Display of shaking time- Error code display

SpecificationsType of movement: rocking and rollingShaking diameter 24.5 (height)Roller size (l x Ø): 310 x 32mmAmbient temperature: +4°C to +50°CMax. humidity: 80%Protection class: IP 21Power supply: 100-240V, 50/60Hz

Holds a wide variety of tubes, flasks, microplates, and odd-shaped vessels.Available in two interchangeable platform configurations. Magnetic platformfeatures unique spring clip plate system. The optional Standard platform (Cat.No. 9.730 104) is designed to turn 90 degrees allowing different mixingmotions. Designed for cold room and incubator use. Will easily fit in mostincubators. Uniquely designed for a wide selection of motions, which can beadjusted from gentle rolling to forceful end over end mixing. Continuous-dutyquality motor provides smooth, quiet operation.

SpecificationsSpeed: 5rpm to 35rpmEnvironmental: ATEX-Installation Category 2, 0°C to

38°C, 95% max. relative humidityOverall dimensions (WxDxH): 400 x 175 (290 platform horizontal) x

400mmDimensions magnetic platform: 290 x 315mmDimensions standard platform:Weight: 5.2kg

Samplers 14


Sampling scoops and spoons, PS, sterile

Type Capacity PK Cat. No. Price Now

ml AUD AUDScoopScoopScoopSpoonSpoonSpoonSpoon

601252501.232.464.9314.79

1111111

9.150 4619.150 4629.150 4639.150 6399.150 6409.150 6419.150 642

1.902.853.801.901.901.901.90

2.002.003.001.501.501.501.50

Other sampling devices are available on request. up to -30%

Powder spatula smartSPATULAS®, PP

Single use polypropylene lab tools made to increase productivity and reducecostly contamination errors. They offer an Always there and always clean’alternative to metal spatulas.- Size related designs to fit perfectly with standard 0.5, 1.5/2.0, 15 and 50 mL tubes

- Ideal for dispensing or sample collection of powders or soft solids- Shatter resistant in liquid nitrogen and resistant to dilute acids and bases and can be used with hot liquids

- Anti-static, sterile and Eco-friendly versions available- Autoclavable and complies with FDA standards for food contact

Description Colour Fortubes

Length Diam. Figure PK Cat. No. Price Now

ml mm mm AUD AUDMicro AntistaticEcoStandardStandardStandard sterileMacro

NaturalNaturalBlueNaturalNaturalGreen

0.215/1.5/2.015/1.5/2.015/1.5/2.015/1.5/2.050

141421212131

3.57.07.07.07.01.0

d-bc-a

300300300300100150

6.256 8966.256 8946.256 8936.256 8956.256 8986.256 897

38.0058.0053.0053.00

209.0051.00

36.0056.0051.0051.00

201.0049.00

up to -5%

LLG-Measuring scoops, PE-HD

For heavy industrial use. Suitable for foodstuff.

Length Capacity PK Cat. No. Price Now

cm ml AUD AUD25303540

250500

10001500

1111

9.201 0919.201 0926.240 4719.201 093

3.003.003.553.70

2.002.003.003.00

up to -33%

Micro spoon spatulas, 18/10 steel

Excellent grade polished stainless steel with one end having a flat spatula andthe other end having a micro spoon.

Length SpoonL x W

PK Cat. No. Now

mm mm AUD AUD150180

99

xx

55

11

9.150 8204.008 451

2.763.55

2.503.50

up to -10%

L A B W A R E

®

White. For disposable use.- Individually sealed and sterilized in a polyethylene bag ready for one time

use and disposal- long handle increases the distance between the hand and the sample- scoop stays vertical when packed or unpacked for use as weighing boat


Free Call: 1300 848 065

Mills - Homogenisers15


Tube Mill control


AUD AUDTube Mill controlDisposable grinding chamber MT 40

110

9.737 7909.737 791

1,777.00108.00

1,690.00105.00

up to -5%

9.737 790 9.737 791

Homogenizer, POLYTRON® PT 1200 E


AUD AUDPT 1200 E, 230V (with EU-plug) 1 9.571 492 1,302.00 1,260.00

-3%

The world’s first patented Tube Mill control is a batch mill with disposablegrinding chambers. Eliminates the possibility of cross-contamination and theeffort of cleaning. The grinding chamber and cover are made from atransparent material so grinding tests can be observed at any time. The millcan be used for hard (Mohs hardness up to 3), dry and brittle materials. It isespecially suitable for grinding seeds, such as corn and wheat. Duringdevelopment of the mill, particular emphasis was placed on security. The millwill only start when the hood is closed. When the grinding chamber is notinserted properly or not closed properly, the drive unit will display an errormessage and the drive will not start. During operation, the grinding chambercannot be opened. The drive and the grinding chambers are secured with alabyrinth seal. No dust can escape from the chamber or penetrate the drive.

- Clearly arranged, multilingual OLED-display- USB interface for control and documentation of all the parameters- Interval operation available- Various operating modes- Adjustable safety speed- Adjustable safety time- Programmable and storable test conditions- Error Code Display- Reproducible test results- Easy operation with touch keypad- Dust proof sealed housing- Quiet operation

SpecificationsOperating principle cutting/impactMotor rating input/output: 175/123WSpeed: 5000 to 25000rpmChamber vol.: 40mlTimer: 5s to 3minInterval timer: 5s to 60sOverload protection: yesCircumferential speed: 65m/sMax. feed hardness: 5MohsDimensions (WxDxH): 180 x 300 x 170mmWeight: 2.7kgProtection class according to DIN EN 60529: IP 30Power supply: 220-240V, 50/60Hz

This handheld homogenizer is ideal for quick processing of small samplequantities and volumes, for example in Life science or genetic.

Application volume: 0.05 to 250ml- Soft start prevents splashing of homogenate from sample vessel- Tip speed up to 12 m/s- Ergonomic design and various models of dispersing aggregates inEasy-to-Clean design

Applications:- General homogenization applications (dispersion and emulsification)- Sample preparation for subsequent extraction of pharmaceutical agents

(API)- Cell disruption, RNA/DNA isolation from tissue- Dispersion of small quantities from plants, animals or human tissue

SpecificationsApplication volume: 0.05 to 250mlMotor input power: 100WAggregates: dia. 3, 5, 7 and 12mm and dia. 20mm

X EC-E116 AggregatSpeed range: Stepless up to 25.000min-1

Max. viscosity: 6000mPasDrive Dimensions (L x W x H): 220 x 44 x 55 mmWeight drive: 440gTested to: EN/IEC 61010, 61326-1

Filter papers 16


LLG-Glass microfibre filters, filter circles

Diam. Filtrationtime


mm secs. AUD AUD2547150257090110

606060

100100100100

100100100100100100100

9.045 8609.045 8619.045 8629.045 8659.045 8669.045 8679.045 868

15.0019.0096.0017.0033.0046.0058.00

14.0018.0092.0016.0032.0044.0056.00

up to -7%

LLG-Qualitative filter paper, circles

Medium speed


PK Cat. No. Now

mm secs. AUD AUD42.590.0110.0

505050

100100100

9.045 8209.045 8219.045 822

3.586.007.00

3.005.006.00

up to -17%


Medium speed



mm secs. AUD AUD42.547.055.070.090.0110.0125.0150.0185.0240.0

88888888888888888888

100100100100100100100100100100

9.045 8009.045 8019.045 8029.045 8039.045 8049.045 8059.045 8069.045 8079.045 8089.045 809

4.004.003.524.005.004.836.007.009.00

12.00

3.503.503.003.504.504.005.006.008.00

11.00

up to -17%


Fast


PK Cat. No. Now

mm secs. AUD AUD90110125150185

1010101010

100100100100100

9.045 8309.045 8319.045 8329.045 8339.045 834

6.007.009.00

11.0013.00

5.006.008.00

10.0012.00

up to -17%

L A B W A R E

®


Free Call: 1300 848 065

Laboratory glassware with standard ground glass17


Erlenmeyer flasks, NS neck, borosilicate glass 3.3Borosilicate glass 3.3. Resistant to heat and almost all chemicals. They meetthe highest quality standards according to DIN 12387. NS necks are incompliance with DIN 12242 standards. Inscriptions are in white enamel whichis specially designed for glass use.

Capacity Socket Height PK Cat. No. Price Now

ml NS mm AUD AUD5050501001002503005001000

14/2319/2629/3214/2329/3229/3229/3229/3229/32

858585

100100140156175220

111111111

9.141 1059.141 1069.141 1079.141 1089.141 1099.141 1109.141 1119.141 1129.141 113

8.008.007.578.008.009.009.00

11.0022.00

7.007.007.007.007.008.008.00

10.0021.00

up to -13%

9.141 113

Separating funnels, Squibb-pattern,borosilicate glass 3.3Supplied with PTFE stopcock, graduated or ungraduated. According to DIN12452. With PP conical stopper.

Capacity NS Description Bore PK Cat. No. Price Now

ml mm AUD AUD50100250500100020005010025050010002000

19/2619/2629/3229/3229/3229/3219/2619/2629/3229/3229/3229/32

ungraduatedungraduatedungraduatedungraduatedungraduatedungraduatedgraduatedgraduatedgraduatedgraduatedgraduatedgraduated

10.010.010.010.012.012.010.010.010.010.012.012.0

111111111111

4.008 4226.241 6706.238 5266.238 5276.241 6696.241 6686.236 3176.236 3186.236 3196.236 3206.236 3216.240 412

36.0037.0040.0043.0066.0089.0038.0038.0041.0045.0068.0093.00

35.0036.0039.0042.0065.0087.0037.0037.0040.0044.0066.0090.00

up to -3%

Separating funnels, conical, borosilicate glass 3.3

Supplied with PTFE stopcock, graduated or ungraduated. According to DIN 12451. With PP conical stopper.

Capacity NS Description PK Cat. No. Price Now

ml AUD AUD50100250500100020005010025050010002000

19/2619/2629/3229/3229/3229/3219/2619/2629/3229/3229/3229/32

ungraduatedungraduatedungraduatedungraduatedungraduatedungraduatedgraduatedgraduatedgraduatedgraduatedgraduatedgraduated

111111111111

4.008 4234.008 4246.242 3954.008 4256.242 6944.008 4264.008 4276.241 9806.241 6716.241 9816.244 0116.242 394

36.0037.0040.0046.0066.0092.0038.0038.0041.0045.0068.0095.00

35.0036.0039.0045.0064.0089.0037.0037.0040.0044.0066.0093.00

up to -3%

6.244 011

NS-Glass stoppers, hollow borosilicate glass 3.3

Manufactured from borosilicate glass 3.3 which is resistant to heat and almostall chemicals. They meet the highest quality standards according to DIN12252. Lower closed end of stopper features a ”drip-tip“ to ensure adheredliquid is returned to the flask. Hexagonal flat head prevents the stopper fromrolling and allows stopper to be stood on end preventing contamination of theground surface.

NS Description PK Cat. No. Price Now

AUD AUD10/1912/2114/2319/2629/32

clearclearclearclearclear

11111

7.900 4836.242 3969.229 9909.229 9919.229 992

2.002.002.003.004.51

1.501.501.501.504.00

up to -50%

Centrifuges and accessories 18


LLG-Centrifuge tubes, PP

Polypropylene tubes with very good thermal, mechanical and chemicalstability. Fitted with screw-on closure. Packed in boxes or bags. Withgraduations and labelling area. Cytotoxicity-free, DNase/RNase- and humanDNA-free.Centrifugation capacitiy (RCF): 6000 x g

Capacity Form Description PK Cat. No. Price Now

ml AUD AUD15151550505050505050

conicalconicalconicalconicalconicalconicalwith rimwith rimwith rimwith rim

sterile, single packednon-sterile, 8x50 in racknon-sterilesterile, single packednon-sterilenon-sterile, in racksterile, single packedsterilenon-sterilenon-sterile,4x50 in rack

5040050050

50050505050

200

9.316 0624.008 5079.316 0639.316 0649.316 0659.316 0669.316 0676.238 7284.008 5064.008 508

9.5270.0083.0012.00

102.0013.0012.5112.5112.0051.00

9.0068.0080.0011.0099.0012.0012.0012.0011.0049.00

up to -8%

Mini Plate Spinner MPS 1000


AUD AUDMPS 1000 1 9.945 790 805.00 786.00

-2%

Mini-Centrifuge Sprout®

Description PK Cat. No. Price Now

AUD AUD1 6.254 604 251.00 247.00

-2%

L A B W A R E

®

- quickly spin down droplets and condensation- use before and after thermal cycling to increase PCR yield- accepts skirted, non-skirted and all standard PCR plates- less than ¼ x the size of most plate centrifuges

SpecificationsCentifugal force: 500xgRotor Speed: 2500rpmCapacity: 2 PCR PlatesRotor: Fixed verticallyDimensions (WxDxH): 483 x 534 x 465mmWeight: 3kgSupply requirements: 230V 50/60Hz

New SnapSpin™ rotors - a new approach to compact centrifuge use!Introducing the next generation of the Sprout® mini-centrifuge loaded withnew features for increased efficiency in the lab. Two new SnapSpin rotors (asix-place standard rotor and an eight-place strip rotor) snap-in and out for fastand easy changes! Plus, two sets of adapters accommodate all majormicrotube and PCR® tube styles (2.0, 1.5, 0.5, 0.2 mL) for customized use.The Sprout is ideal for microfilter cell separations and HPLC samples. Withmost spins lasting around 20 seconds, the ergonomically designed lid isspecifically designed to fit in the palm of your hand for easy repeat openingand use. Made with UV resistant plastic.Operation is now faster and easier: Snap in rotor, load and close. For repeatedspins, simply close the lid to reactivate. An internal safety switch ensures theSprout will not operate without the lid open.Small size offers minimal benchtop space and removable cord for compactstorage.- Low noise and vibration- Small size- Quick Spin feature for short spins.- Numbered tube positions- Unit will not operate without lid in placeSprout includes:- Two easy change, tool-free rotors:- Six-place standard rotor for 1.5/2 mL tubes- Eight-place strip rotor for two 0.2 mL tube strips or 16 single tubes- Six 0.2 mL and six 0.5 mL adapters for customized use- Storage Case - Keeps rotors and adapters contained and dust-free- Tube Rack - Convenient for handling samples before and after quick spins

SpecificationsMaximum RCF: 2000xgMaximum Speed: 6000rpmTubes AccommodatedCircular, one-sizerotor:

six 1.5- and 2.0ml tubes or use with adapters to spinsix 0.4- and 0.5ml tubes

Strip rotor: two 8 x 0.2ml PCR tube strips or 16 x individual0.2ml PCR tubes

Dimensions: 153 x 128 x 104mm

Sprout®


Free Call: 1300 848 065

Ice makers19


-2%

up to -3%

Flake ice maker without reservoir, RFS series

Type Outputkg/24 hrs.

Rating Dimensions(W x D x H)

Weight PK Cat. No. Price Now

up to kg W mm kg AUD AUDRFS 0300 ARFS 0650 ARFS 1200 ARFS 2300 A

174322546

1093

1465300441038646

559 x 600 x 660559 x 600 x 660760 x 600 x 696944 x 684 x 700

79104119210

1111

9.580 2119.580 2129.580 2139.580 214

3,708.005,630.006,765.00

13,049.00

3,650.005,490.006,550.00

12,950.00

Reservoir and adapters for RFS seriesType Description For

modelPK Cat. No. Price Now

AUD AUDB 320B 420B 570B 970 + K-00368F 1300

Reservoir 95kgReservoir 141kgReservoir 195kgReservoir 323kg includes adapterReservoir 599kg

RFS 0300 A/W und RFS 0650 A/WRFS 0300 A/W und RFS 0650 A/WRFS 01200 A/WRFS 01200 A/WRFS 02300 A/W

11111

9.580 2219.580 2229.580 2239.580 2249.580 225

1,316.001,393.001,555.002,436.004,292.00

1,287.001,354.001,508.002,386.004,154.00

9.580 211

9.580 214

Flake ice maker with reservoir, air cooled, RF Series

Type Outputkg/24 hrs.

Rating Capacity Dimensions(W x D x H)


up to kg W kg mm kg AUD AUDRF 0244 ARF 0266 ARF 0385 ARF 0399 ARF 0644 A

8282

151151312

703703

102610263004

1827405454

500 x 660 x 842500 x 660 x 952738 x 690 x 1003738 x 690 x 1172741 x 678 x 1167

7176

102109117

11111

9.580 2019.580 2029.580 2039.580 2049.580 205

3,503.003,609.004,215.004,373.006,155.00

3,450.003,550.004,120.004,280.006,020.00

9.580 203

up to -3%

- Vertical condenser cylinder with internal worm gear system- HACCP compliant- Energy-saving production- Convenient door for easy access- Separate power switch- Ready to plug in- Stainless Steel- Deionized water suitable

Included: Adjustable stainless steel feet 110 to 150mm, water supply kit, drainkit, ice scoop.SpecificationsCooling: Air (A)Refrigerant: R 404 APower supply *: 230V, 50Hz* Other voltages on request

- HACCP compliant- Robust and low-maintenance- Improved energy efficiency by 5% (RFS models)- Stainless steel (inside/outside)- Separate power switch- Air-or water-cooled- Vertical condenser cylinder with internal worm gear system- Deionized water suitable

Included: Water supply kit, drain kit, adapter kit for memory.

SpecificationsCooling: Air (A)Refrigerant: R 404 APower supply *: 230V, 50Hz* Other voltages on request

Thermostats 20


Cooling circulators

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to 200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closedapplications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulationapplications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the MPC models.

Type WorkingTemp. range

Cooling capacity kW at0/-10/-20°C

Bathcapacity

Bathopening


Pump max.


°C L mm mm L/min / bar AUD AUD-20 ... +200-20 ... +200-20 ... +200-20 ... +200-30 ... +200-30 ... +200-30 ... +200-30 ... +200

0.2/0.12/0.050.2/0.12/0.050.2/0.12/0.050.2/0.12/0.050.35/0.27/0.160.35/0.27/0.160.35/0.27/0.160.35/0.27/0.16

1212151520202525

290 x 152290 x 152290 x 152290 x 152290 x 329290 x 329290 x 329290 x 329

350 x 560 x 430350 x 560 x 430350 x 560 x 430350 x 560 x 430350 x 555 x 615350 x 555 x 615350 x 555 x 615350 x 555 x 615

27 / 0.720 / 0.227 / 0.720 / 0.227 / 0.720 / 0.227 / 0.720 / 0.2

11111111

9.859 2279.857 4079.859 2289.857 4089.859 2299.857 4099.859 2309.857 404

5,319.004,782.005,996.005,347.006,493.005,844.006,852.006,429.00

5,198.004,295.005,834.004,825.006,354.005,250.006,743.005,795.00

up to -10%

CC®-K12MPC®-K12CC®-K15MPC®-K15CC®-K20MPC®-K20CC®-K25MPC®-K25


Free Call: 1300 848 065

Heating bath circulators

Heating bath circulators are suitable for temperatures up to 200°C or 300°C depending on model. The Compatible Control models have a continuously variablepressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage.The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature ofobjects placed directly in the open bath.

Type Bathcapacity

Heatingcapacity

Supplyreq., 50 Hz


Suction pumpcap.

Pressurepumpmax.


L kW V mm L/min bar L/min bar AUD AUD5.05.05.08.5 / 5.2*15 / 8.5*

2.02.02.03.0

3.0 / 4.0

230230230230230 / 400

178 x 337 x 355178 x 337 x 355210 x 335 x 392242 x 404 x 392335 x 382 x 433

25 / 0.417 / 0.1822 / 0.422 / 0.422 / 0.4

27 / 0.720 / 0.233 / 0.733 / 0.733 / 0.7

11111

9.859 2216.244 1219.859 2229.859 2239.859 224

2,832.002,183.003,606.004,463.005,333.00

2,740.002,121.003,510.004,320.005,190.00

*using displacement insert

-3%

Heating circulators

Good things come in small packages! Thanks to their low bath volumes the models CC-104A und MPC-104A(with polycarbonate bath) as well as the CC-202C and MPC-202C (with stainless steel bath) are especiallysuitable for controlling the temperature of small external applications. All models are fitted with rear mountedM16x1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump.The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and0.05 K for the MPC models.Models CC-202C and MPC-202C are fitted with an integrated cooling coil as standard. With the models CC-104Aand MPC-104A the cooling coil is an optional extra.

Type Bathopening


Suction pumpcap.

Pressure pumpmax.


mm mm L/min bar L/min bar AUD AUDØ 25Ø 25Ø 25Ø 25

147 x 235 x 330147 x 235 x 330178 x 260 x 355178 x 260 x 355

25/0.417/0.1825/0.417/0.18

27/0.720/0.227/0.720/0.2

1111

9.859 2137.638 7199.859 2206.244 120

2,183.001,534.002,473.001,824.00

2,120.001,487.002,398.001,785.00

-3%

Thermostats21


SpecificationsTemp. control rangeCC®-205B/MPC®-205B: (-30)45 ... 200°CCC®-304B/CC®-308B/CC®-315B: (-20)28 ... 300°CSafety class: FL, IIIStability to DIN 12876CC®-205B/CC®-304B/CC®-308B/CC®-315B: 0.02KMPC®-205B: 0.05K

CC®-205BMPC®-205BCC®-304BCC®-308BCC®-315B

Temperature rangeCC®-104A/MPC®-104A: (15)25 to 100°CCC®-202C/MPC®-202C: (-30)45 to 200°CTemp. Stability to DIN 12876CC® models: 0.02KMPC® models: 0.05KSafety class: FL, IIIBath depth: 150mmHeating capacity: 2kW

CC®-104AMPC®-104ACC®-202CMPC®-202C

Liquid handling 22


LLG-Electrical pipette pump plus

This ergonomic pipette controller is lightweight, made from UV resistantmaterial, features adjustable valves and is microprocessor controlled forreliability and accuracy. The powerful pump offers rapid yet sensitive aspirationand dispensing. Filling and dispensing speed is easily set using the same handby pressing the large control button. The bright LED display will indicate whichof the three modes has been selected, High, Low or Gravity Mode. The userlabeling area enables customization, instant recognition and/or taskdesignation. Additional features include hand neutral design, concave paddedtriggers, a 1ml pipette adapter to increase stability of small pipettes, a longlife Li-Ion battery that allows20 hours of continuous usage, low battery indicator and two holders asstandard

- For 1-100ml glass or plastic pipettes- Soft touch triggers- 5 different coloured autoclavable nose pieces as standard included- Uses standard 0.45µm hydrophobic filters- Long life, easily changeable rechargeable battery- Sensitive and adjustable aspiration and dispensing- Labeling area for identification- Delivered completely with universal voltage and plug faced charger- Comes with bench stand and magnetic/fixable wall mount

Description PK Cat. No. Price Now

AUD AUDLLG-Electrical pipette pump plus 1 9.281 041 241.00 233.00

-3%

Safety pipette bulb Flip™

Fits virtually all pipette sizes.Only two valve operation points.With automatic vent valve that can be removed for cleaning.


AUD AUDFlip™ 1 9.273 838 4.83 4.00

-17%

LLG-Serological pipettes, PS, graduated,sterile

- Graduations for accurate dispensing up to ±2%- Colour coding for easy volume identification- Pyrogen-free- Sterile, individually packed

Volume Grad. Colour code PK Cat. No. Price Now

ml ml AUD AUD12510102550

1/1001/501/101/101/102/105/10

yellowgreenblueorangeorange (wide mouth)redpurple

500500200200200150100

9.380 4409.380 4417.930 4017.930 4029.380 4427.930 4039.380 443

88.00109.0058.0063.0063.0088.00

113.00

85.00106.00

56.0061.0061.0085.00

109.00

up to -4%

Graduated cylinders, PMP, tall form, class A

Crystal clear. With a raised scale and ring marks at the primary scale points,calibrated IN’. Class A tolerances according to DIN 12681/ISO 6706.Hexagonal base with bottom studs provides high stability.Thermal stress up to 121ºC (autoclaving) does not cause tolerance limits to bepermanently exceeded.

Capacity Accuracy Grad. Height Diam. PK Cat. No. Price Now

ml ± ml ml mm mm AUD AUD10255010025050010002000

0.100.250.500.501.002.505.00

10.00

0.200.501.001.002.005.0010.0020.00

145170200250315360440482

1522273344586997

11111111

9.274 5089.274 5209.274 5289.274 5389.274 5489.274 5549.274 5629.274 564

5.006.007.009.00

14.0021.0032.0053.00

4.005.006.008.00

13.0020.0031.0051.00

up to -20%

L A B W A R E

®


Free Call: 1300 848 065

1

LLG-Electronic Pipettors

The new LLG-Electronic Pipettors have been designed for maximumperformance, accuracy and simple operation. The microprocessor-basedsystem reduces the possibility for human error. Lightweight and ergonomiccontrols help to reduce the risk of repetitive strain injuries which is common inmanual pipetting. Attractively designed with an extraordinary finishing of partsdue to high grade mould selection. That gives the LLG-Electronic Pipettor itsfinal touch.

Superior in form and functionThe LLG-Electronic Pipettor is designed to meet strict criteria: highperformance, high accuracy, safety and innovative ergonomic.

Ingenious single operationAll software controls and functions of the LLG-Electronic Pipettors are done byone patented user-friendly innovative knob (jog-dial). No small switches andno snippy button keys as in old, conventional electronic pipettors. Eachpipettor can be easily selected and identified by colour coding.

Modern visual displayAn innovatic OLED-Display for a graphic readout of status indicator for allfunctions of the new LLG-Electronic Pipettors.

Self-calibration systemThe user can calibrate the pipettor for solutions of different viscosity. Thesystem also permanently controls all functions and indicates all errors.

Resourceful SCS-SystemThis system controls the piston movement of the LLG-Electronic Pipettors andguarantees highest precision and accuracy.

CE-MarkingThe LLG-Electronic Pipettor is CE-marked as IVD certified and adjusted for thedelivery (Ex) of its nominal volume as defined in ISO 8655.

Capacity Dispensingsteps

PK Cat. No. Now

µl AUD AUD0.2 to 105 to 10010 to 20050 to 1000100 to 5000

52.50.90.40.4

61.50.50.50.5

0.010.100.201.005.00

11111

9.281 0509.281 0519.281 0529.281 0539.281 054

375.00375.00375.00375.00375.00

363.00363.00363.00363.00363.00

All LLG-Electronic Pipettors are supplied with EU, UK and US chargers.

-3%

LLG-Pipette tips premium "economy" fordigital microlitre pipettors

Certified free of DNase, RNase, suitable for microbiology. Guaranteed metal-free. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EG. Sterility acc. to EN552/ISO 11137 and DIN EN 556.

LLG universal fit tips are engineered for a wide variety of pipettors and areideal for laboratories with multiple brands of pipettors, even multi-channelpipettors. Our universal tips feature the universal grip design, using flexiblematerials with a series of bands and supports producing a positive seal. LLGtips have thin walls and a small surface area at the tip, greatly minimising thepossibility of the tip retaining sample droplets. In addition the small surfacearea reduces the touch-off angle between the outer tip wall and the receivingsample tube. This reduced touch-off angle virtually eliminates the potential ofcapillary retention between the tip orifice and tube wall. Each of our tips ismoulded to give a flash-free and uniform delivery orifice for consistentaccuracy and reproducible sample delivery. All our tips are provided withcalibration lines at specific volumes, acting as visual checks to minimise anyrisk of errors during sample aspiration.

Capacity Colour Type PK Cat. No. Price Now

µl AUD AUD0.1 to 100.1 to 101 to 2001 to 2001 to 200100 to 1000100 to 1000100 to 5000*100 to 5000**1000 to 10000

clearclearyellowclearyellowblueblueclearclearclear

1 bag of 100010 racks of 961 bag of 100010 racks of 9610 racks of 961 bag of 100010 racks of 961 bag of 2501 bag of 2501 bag of 100

1000960

1000960960

1000960250250100

9.409 0999.409 0459.409 0466.253 5779.409 0479.409 0489.409 0499.409 0976.254 3649.409 098

10.4533.348.55

35.0031.3512.3536.2924.7027.0022.80

10.0032.00

8.0034.0031.0012.0036.0024.0026.0022.00

*for manual pipettors**for electronic pipettors

up to -6%

LLG-Low-Retention Pipette tips premiumfor digital Microlitre pipettors

Certified free of DNase, RNase, suitable for microbiology. Guaranteed metal-free. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EG. Sterility acc. EN552/ISO 11137 and DIN EN 556.Sample retention can be a major contributor to pipetting inaccuracy, andsiliconization of tips has proved unsatisfactory because of autoclaving andcontamination problems. For LLG quality tips a new polymer, Novelle-Polypropylene has been developed, that produces a ”super slick surface“ onour new ULR-tips, that actually improves with autoclaving and cannot leachfrom the tip surface. On average, Novelle Polymer and LLG ULR-tips reducesthe tip retention by near 85% and decreases the standard deviation of theretained volume by more than 75%. Liquid handling accuracy and precisionare crucial to success in today’s molecular biology laboratories, especially forDNA analysis and protein handling. A significant culprit of pipette inaccuracy isbinding of sample. The LLG ULR-tips reduces the binding, thus increasingsample delivery accuracy. Tests demonstrates that LLG ULR-Tips significantlyreduces the amount of DNA and protein bound by the tip. Furthermore LLGULR-Tips offer a marked improvement over the best low retentiontechnologies.

Capacity Colour Type PK Cat. No. Price Now

µl AUD AUD0.1 to 100.1 to 101 to 2001 to 200100 to 1000100 to 1000

ClearClearClearClearClearClear

1 bag of 100010 racks of 961 bag of 100010 racks of 961 bag of 100010 racks of 96

1000960

1000960

1000960

9.409 0389.409 0399.409 0419.409 0429.409 0439.409 044

14.0045.0010.6239.0015.0048.00

13.0043.0010.0038.0014.0046.00

up to -7%

Liquid handling23


L A B W A R E

®

1

2

2

Accuracy≤ ± A%

(max. vol.)

Reproducibility≤ ± CV%

(max. vol.)

Spectrophotometers and pumps 24


Laboratory peristaltic pumpsFH10/FH15/FH30

Type Channels Flowrate

Rotationspeed


ml/min. rpm AUD AUDFH10FH10FH15FH15FH30

11112

0.002 - 1.650.017 - 110.07 - 500.8 - 1050.8 - 14

1.2 - 1013 - 8050 - 30020 - 10020 -100

11111

9.828 6019.828 6029.828 6039.828 6049.828 605

1,004.001,003.001,003.001,044.001,085.00

976.00976.00976.00995.00995.00

up to -8%

FH10

FH15

FH30

Spectrophotometer Genova Nano


AUD AUDGenova Nano 1 9.775 171 9,562.00 9,298.00

-3%

3 in 1 SpectrophotometerStandard Spectrophotometer with all the functions of the 7315. Withmeasurement modes for photometrics, concentration, multi-wavelength,spectrum scanning, quantitation and kinetics.Life Science Spectrophotometer with all the functions of the Genova plus.Additional measurement modes for the measurement of nucleic acid purity,protein assays, nucleic acid concentration and optical density of cell culturesadd to the flexibility of the Genova Nano.Micro-volume Spectrophotometer: Making measurements easier, quickerand less strenuous for 0.2 to 0.5 µl samples.

- Micro-volume, life science and standard spectrophotometer in one- Ideal for DNA, RNA and Protein measurements- Only 0.5µl sample volume required- Purity scan over entire wavelength range, 198 to 1000nm- Detects DNA concentrations as low as 2ng/µl- Easy and quick to clean- Results are reproducible, accurate and easily obtained- Method and result saving to USB memory stick- 3 year warranty including Xenon lamp

SpecificationsWavelengthRange: 198 to 1000nmAccuracy: ±2nmSpectral Bandwidth: 5nmPath Length: 0.2 or 0.5mm (auto-ranging)PhotometricsAbsorbance Range: 15 to 125A (10mm equivalent)Absorbance Accuracy: ±2% at 260nmAbsorbance Precision: <0.005A between 0 and 1A (at 260nm and

0.5mm)Concentration/QuantitationMaximum Concentration: 6000ng/µl (dsDNA) (at 0.2mm)Detection Limit: 2ng/µl (dsDNA) (at 0.5mm)Measurement Time: <6.5 secondsMinimum Sample Size: 0.5µl (at 0.2mm) 1.0µl (at 0.5mm)Maximum Sample Size: 5μl (in Nano mode)DNA measurement modes: dsDNA, ssDNA, RNA, Oligonucleotides,

260/280, 260/230, Variable ratioProtein measurement modes: BCA, Bradford, Lowry, Biuret, Direct UVDimensions (WxDxH): 275 x 400 x 220mmWeight: 7.7kg

- Simple, fast tubing changes- Fixed occlusion eliminates adjustment after tubing changes and assuresoperation against pressure up to 30 PSIG

- Contamination free pumping fluid contacts only the tubing material- Controls are mounted on front panel with a separate single-turn speed

control- Flow direction switch with center ”OFF“ position- Green LED power ”ON“ indicator- ”Prime“ button runs pump at maximum speed to rapidly prime or flush

tubing- Reversible pump direction permits purging of tubing prior to use- Flow rates less than 2 ìl/min to 105 ml/min- Pressure up to 2.5 bar (30 PSIG)- Accurate and repeatable flow delivery- Filtration, up to 60 PSIG- Address a wide range of critical applications with tubing materials that are

approved to USP class VI, FDA and NSF standards- Accommodates all sizes and formulations of microbore flow rated tubing

ergonomic design- Space efficient low profile, stackable design- Remote capability actuate unit with a foot switch or contact closure

SpecificationsOperating temperature: 0 to 40ºCStorage temperature: -25 to 65ºCHousing materials: Powder-coated steelIP rating IP 22Agency approvals: UL, cUL, CE, ROHS Power Supply

17.8 x 13.4 x 11.4cmController dimensions (L x W x H):Weight: 1.5kgVoltage (50/60 Hz): 90-130 or 160-260V AC (auto

selected)Motor type: PMDCControl type: PWM (Pulse Width Modulated)


Free Call: 1300 848 065

25

Aspirators- and Vacuum pumps 26


BioChem-VacuuCenter BVCbasic/control/professional

Type Pump Dimensions(W x D x H)


Model mm kg AUD AUDBVC basicBVC basic GBVC controlBVC control GBVC professionalBVC professional G

--ME 1CME 1CME 1CME 1C

200 x 250 x 490180 x 230 x 430194 x 408 x 500194 x 408 x 430194 x 408 x 500194 x 408 x 430

2.82.87.37.77.37.7

111111

9.882 2259.882 2269.882 2279.882 2289.882 2299.882 230

1,016.001,126.002,031.002,142.002,819.002,724.00

990.001,092.001,972.002,079.002,743.002,631.00

9.882 228

9.882 229

Aluminium diaphragm pumps

Diaphragm pumps made with Aluminium and FPM as the wetted materials arethe optimal selection for non-corrosive applications such as backing pumps forwide range and turbomolecular pumps, for regenerating cryopumps, forevacuating or transferring gases and for analysis equipment. Vacuum filtrationis one of the most common applications used for sample preparation inchemistry, microbiology, waste water control and other analytical processes.The new ME 1 and ME 1 C diaphragm pumps offer a compact, high perfomanceand easy to use solution which is perfect for both single and multiplefiltrations.

Type Flowrate

(50/60 Hz)

Ultimatepressure



m³ / hr. mbar mm AUD AUDME 1 (CEE)ME 1 (CH)ME 1 (UK)

0.7 / 0.850.7 / 0.850.7 / 0.85

100100100

247 x 121 x 145247 x 121 x 145247 x 121 x 145

111

9.880 9309.880 9319.880 932

782.00782.00782.00

756.00756.00756.00

-3%

9.880 930

Chemistry diaphragm pumps

Gases and vapours only come into contact with chemically-resistant, fluorine-derived plastics in chemical ("C") diaphragm pumps. Does not require acooling trap. Optional accessories or direct use of complete pumping unitsbased on these pumps enable almost 100% recovery of the solvents in useand protection of the atmosphere.

Type Flowrate

(50/60 Hz)

Ultimatepressure



m³ / hr. mbar mm AUD AUDME 1C (CEE)ME 1C (CH)ME 1C (UK)

0.7 / 0.850.7 / 0.850.7 / 0.85

100100100

247 x 121 x 145247 x 121 x 145247 x 121 x 145

111

9.880 9349.880 9359.880 936

1,038.001,038.001,038.00

965.00965.00965.00

Diaphragm pumps ATEX-models available on request.

-7%

9 880 934

The compact BioChem-VacuuCenter offers the perfect solution for safe,sensitive and efficient aspiration of supernatants or filtration in all applicationareas.

- The BioChem-VacuuCenter BVC basic is designed for connection to anexisting external vacuum source like a diaphragm pump or a vacuumnetwork

- The BioChem VacuuCenter BVC control and professional serve for efficientand convenient aspiration of supernatants. The vacuum level and thus thesuction force is sensitively adjustable by the electronic touch panel andallows a delicate and reproducible operation. The chemically-resistantdiaphragm vacuum pump is automatically turned on and off as needed,which is reducing the low noise level even further.

- The BVC professional with 4L PP bottle with self-closing quick couplingsminimises risks in transporting hazardous waste and in contamination of theworkplace.

- All systems are available in two complete equipment options with differentcollection flasks and ready to accept a second aspiration hand controller(VHC) to support two users. The 2L borosilicate glass bottle (all types with"G" in the description) with a protective coating has a very high chemicalresistance. For larger amounts of liquids the 4L bottle of unbreakablepolypropylene (PP) is used.

Country specific power cable, please order separately.

Supply requirements: 230V 50/ 60Hz -3%


Free Call: 1300 848 065

Lab-Accessories27


up to -5%

-5%

-3%

Cryo-Safe™ Mini Cooler

Dimensions(L x W x H)

Colour Temp.range


mm °C AUD AUD151 x 108 x 125151 x 108 x 125197 x 140 x 190243 x 157 x 146243 x 157 x 146

redyellowredredyellow

11111

9.401 0909.401 0919.401 0929.401 0939.401 094

192.00154.00185.00301.00250.00

187.00149.00175.00295.00240.00

9.401 090 9.401 091

Single hotplate Ceran®

Type Dimensions(W x D x H)


mm AUD AUD305 x 410 x 75 1 9.645 510 272.00 259.00

Sealing tape PetriSeal/ContainerSeal

An ideal Sealing Tape for Petri Dishes, Microplates, Lids, Caps and other LabItems. Tape stretches, conforms and seals the irregular perimeter of microtiterplates and petri dishes. Tape and adhesive resist most solvents and causticagents. Seal remains flexible in moderate freezer temperatures and withstandsintermittent exposure to 100°C.Waterproof.

Colour Width PK Cat. No. Price Now

mm AUD AUDBlueClearRedWhiteYellow

1313131313

11111

9.170 0579.170 0589.170 0599.170 0609.170 061

72.0072.0072.0072.0072.00

70.0070.0070.0070.0070.00

Width

mm1313131313

Polycarbonate. A non-toxic freezing gel is isolated within the walls of thecooler, guaranteeing that any labels or marks on the vials or tube are notdamaged.- The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled

(9.401 093, 9.401 094) polycarbonate lid shows tube location and matcheslocations printed on the cooler

- side handles ( 9.401 090, 9.401 091) or a wire handle for easy carrying- Coolers can be stacked to save space and maximize freezer volume- rubber feet to prevent slipping.- Adapters change well size for 0.5 ml tubes (all models except 9.401 092)- All polycarbonate cooler body cleans easily- Use to protect samples in freezers with defrost cycle and fluctuating

temperatures

≤ 0°C for 2.5 h≤ -15°C for 1 h≤ 0°C for 3 h≤ 0°C for 3 h≤ -15°C for 1.5 h

Housing made of stainless steel, brushed and polished, in a unique SoftlineDesign, Schott Ceran cooking surface. Adjustable power control with power-saving. Two-circle HiLight technique, thus extra large heating zone (dia.210mm) can be activated. Thermal shutdown and automatic cooking system.Residual heat indicator and warning light.

SpecificationsOne unit provides heat outputs of:1. Heating area: dia. 140mm, 1000W2. Heating area: dia. 210mm, 2200WSupply requirements: 230 V

Single hotplate Ceran®

Lab-Accessories - Block heaters 28


Safety box DURAPorter™, PC

Colour PK Cat. No. Price Now

AUD AUDClear with blue handlesYellow with yellow handlesRed with red handles

111

9.194 0059.194 0069.194 007

120.00120.00120.00

116.00116.00116.00

-3%

Dry Block Heater

Digital block heaters for 1, 2, 3 or 4 aluminium blocks provides precisetemperature control in small vessels. Included PT 1000 temperature sensorallows temperature control directly in the sample vessel. It is used with PCRtubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater isideal for melting and boiling point determination, enzyme reactions, incubationand activation of cultures, immunoassays, DNA denaturation, culture mediatests, coagulation tests, blood-urea-nitrogen determinations and in situhybridizations.

- Stepless adjustable temperature up to 120°C- Timer: Countdown, adjustable from 1min to 99h 59min- Counter: Display of heating time- Highly versatile with a large number of blocks- Error code display- Fixed safety circuit- Acoustic signal at end of test

Without blocks. Please order separately.

Temperature range RT to +120°CDisplay: LEDHeat control accuracy: ±1KConnection for ext. temperature sensor: DIN 12878Control accuracy with sensor: ±1KTemperature constancy in medium: ±1KTemperature stability within the blocks at 37°C: ±0.2°CTemperature stability within the blocks at 60°C ±0.4°CFixed safety circuit: +140°CProtection class acc. to DIN EN 60529: IP 21Power supply: 220-240V, 50760Hz

Type Heatingpower

DimensionsSet-up plate(W x D)



W mm mm AUD AUDDry Block Heater 1Dry Block Heater 2Dry Block Heater 3Dry Block Heater 4

150250300375

96 x 7596 x 15296 x 22796 x 304

151 x 228 x 73151 x 304 x 73151 x 380 x 73151 x 456 x 73

1111

9.816 8019.816 8049.816 8079.816 810

966.651,158.001,308.001,658.00

915.001,095.001,245.001,575.00

-5%

9.816 801

9.816 807

Pipette stand Flip & Grip™

Unique pipette holder that gives you the option of using on the bench top, oras a hanging under shelf holder to help maximize your working spaceavailable.- Will hold up to 6 single channel pipette, or a combo of 3 single and3 multichannel

- Holds most common brands. Rubber grips prevent scratching pipette- Holder rotates for easy pipette selection and storage- Weighted base. Fixing screw provided for under shelf option- Dimensions (W x H): 193 x 332mm (bench top style); 193 x 187mm (under shelf style)

Colour PK Cat. No. Price Now

AUD AUDBlueLimeMagenta

111

9.194 0029.194 0039.194 004

109.00109.00109.00

105.00105.00105.00

-4%

SpecificationsIdeal for transporting biological and clinical samples, as well as instrumentsand products that you want to keep clean and dry under testing environmentalconditions. The clarity of the DuraPorter™ enables the user to visibly checksample integrity, so that it can be opened using the right precautions.- Polycarbonate construction are available in three colors for use/owner

identification- Silicone water-tight seal and three lid clasps provide secure closure- Carry handle folds neatly into body space allowing the units to be stacked- Lid opens a full 180°, allowing total access to contents and making it easier

to clean- Will accommodate 13 and 16 mm tubes in a 72-place OneRack™, or similar

sized/brand of rack- Use the separators provided to create your own compartment sizes, or use

empty to transport larger products and equipment- Autoclavable- Dimensions (WxDxH): 380 x 160 x 196 mm


Free Call: 1300 848 065

Syringes BD Discardit™ II, disposable, 2-piece, PP/PE, sterile

Clear barrel for perfect visualisaion of syringe contents.- 2-piece syringes with Luer-Tip- Smooth plunger movement, reduced sliding force- Retaining ring: prevents accidential plunger rod withdrawal- Leak-tight: Tested in compliance with ISO 7886-1- Scale marking: accurate graduation suited to user's needs- Design of finger grip flanges ensure stability and comfort during injection- Ergonomically designed plunger for single-handed operation- Barrel material: Polypropylene- Plunger material: Polyethylene- Plunger lubricant: Oleamide- Colour-coded packing units- Sterilization method: Ethylene oxide- Silicone oil-free- Sterile single packing, single use, latex-free, PVC-freeFor pressure applications we recommend three-part syringes.

Capacity Nozzletype

Grad. PK Cat. No. Price Now

ml ml AUD AUD251020

ConcentricEccentricEccentricEccentric

0.100.200.501.00

10010010080

6.052 1537.619 7849.410 4036.052 157

4.837.00

11.0012.00

4.006.00

10.0011.00

up to -17%

Syringe needles, Stainless steel,disposable, sterileWith Luer push-on fitting for use with disposable syringes. Supplied sterile inboxes of 100.

Gauge Diam. Length PK Cat. No. Price Now

mm mm AUD AUD21G x 1½ inch*23G x 1 inch

0.80.6

4025

100100

9.950 3059.950 306

4.004.00

3.003.00

*are intravenous thin wall needles.

-25%

Syringes, disposable, PP, sterile

Polypropylene with two-piece plunger and Luer nozzle. Without needle.Supplied sterile, individually pouch-sealed in outer boxes.


ml AUD AUD151050

10010010060

9.950 2969.950 2989.950 2999.950 301

14.0021.0027.0060.00

13.0020.0026.0058.00

up to -7%

Syringes for Agilent GC autosampler

GC syringes for Agilent autosampler 7673, 7683 and 6850with fixed or removable needletwo different needle diameter and tapered needleshigh reproducibiliy, low carry-over

Gauge(OD)

NeedleTyp


mm µl AUD AUD23-26s (0.63/0.47)23-26s (0.63/0.47)23-26s (0.63/0.47)23-26s (0.63/0.47)23-26s (0.63/0.47)23-26s (0.63/0.47)26 (0.47)26 (0.47)23 (0.63)23 (0.63)26 (0.47)26 (0.47)23 (0.63)23 (0.63)26 (0.47)23 (0.63)23 (0.63)

fixedfixedfixedfixedfixedfixedfixedfixedfixedfixedfixedfixedfixedfixedremovableremovableremovable

55101010 (Gas tight)10 (Gas tight)5555101010100.50.51

16161616161616111

9.221 2706.204 1036.226 4276.254 9719.221 2719.221 2726.203 3506.205 0769.221 2736.072 5289.221 2746.206 5026.089 5876.050 9626.228 7889.221 2759.221 276

121.00460.0080.00

325.00119.00514.00119.00475.00119.00470.0081.00

314.0078.00

318.00187.00187.00160.00

117.00445.00

78.00315.00115.00498.00113.00460.00115.00455.00

79.00308.00

76.00312.00184.00181.00155.00

up to -5%

Chromatography29


30


Free Call: 1300 848 065

Septa for Agilent GC

All septa are made with a high grade silicone material to minimize needlecoring. These new materials meet or exceed industry standards, giving youreassurance in the quality of your work. All these septa grant a good durability,excellent resealing properties and excellent solvent resistance.

GP = General Purpose Silicone Septa for non-demanding routine applicationsup to 200°C.EC = High Temperature Silicone Septa, for significantly longer injection life,low bleed and low injection port adhesion.MN = High Temperature Premium Silicone Septa for autosamplers, up to 400injections per septum.

Also available: Septa for instruments from Perkin-Elmer, Shimadzu, Thermo andVarian/Bruker.

Diam. Material Temp.max.


mm °C AUD AUD5.05.09.59.59.511.011.011.011.012.512.512.5

GPMNGPECHTGPECMNHTGPHTEC

200400200400400200400400400200400400

505050252550255025502525

9.003 5909.003 5916.224 1899.003 5929.003 5936.085 4199.003 5946.255 3489.003 5956.087 2429.003 5969.003 597

89.00108.0087.0093.00

101.00101.0093.00

159.00101.00101.00101.0093.00

87.00105.00

85.0091.0098.0098.0090.00

154.0098.0098.0098.0090.00

up to -3%

Chromatography31


Ferrules for Agilent GC

ColumnID

Ferrule ID


mm mm AUD AUD0.1 - 0.250.320.530.1 - 0.250.320.530.1 - 0.320.45 - 0.53

0.40.50.80.40.50.80.50.8

AAABBBCC

1010101010101010

6.223 5589.221 2789.221 2796.088 1096.059 9766.059 9777.652 3559.221 280

124.00124.00124.00103.00103.00103.0089.0089.00

120.00120.00120.00100.00100.00100.00

85.0086.00

up to -6%

Inlet Liner and o-rings for Agilent GC

Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. SGE's inlet liners come as a complete, single packed unit.

5 or 25 packs, individualy packedComplete with instrument appropriate o-rings and sealing ringsEach pack is supplied with quality test results

Description Ext.diam.

Int.dia.

Length PK Cat. No. Price Now

mm mm mm AUD AUDSplit, Straight-through LinerSplit, with Quartz woolSplit / Splitless with Single TaperSplit / Splitless with Single Taper (Quartz Wool)Split/Splitless Focus LinerSplit/Splitless Focus LinerSplit/Splitless Tapered Focus LinerSplit/Splitless Tapered Focus LinerSplit/Splitless FAST Focus LinerSplit/Splitless Tapered FAST Focus LinerSplit/Splitless Recessed Gooseneck (Quartz Wool)ConnecTite Liner Bottom HoleViton o-ring, suitable for liners with OD 6,3mm

6.36.36.36.36.36.36.36.36.36.36.36.36.3

4.04.04.04.04.04.04.04.02.32.34.04.04.0

78.578.578.578.578.578.578.578.578.578.578.578.578.5

55555

255

255555

10

7.653 1459.003 5769.003 5796.236 7516.223 5526.239 3326.223 5539.003 5726.223 5549.003 5869.003 5889.003 5879.221 277

179.00199.00248.00248.00248.00931.00303.00

1,024.00255.00300.00248.00517.0078.00

173.00193.00241.00241.00241.00904.00288.00993.00249.00292.00241.00505.00

76.00

up to -5%

7.653 145 6.236 751 6.223 553 9.003 588

High quality ferrules made of 100% Graphite or 15%Graphite/85%Vespel

Type A: 15%Graphite/85%Vespel, for injectors and detectors at atmosphericpressure (e.g. FID)

Type B: 15%Graphite/85%Vespel, for GC-MS interface connection

Type C: 100%Graphite, for injectors and detectors at atmospheric pressure(not for GC-MS)

Lab Specia ls

Phone: 1300 848 065Email: [email protected]: www.labfriend.com.au

Type For tubes Array Dimensionsopen(W x D x H)

Dimensionsclosed(W x D x H)


mm mm AUD AUDWork2Store™ 15/2.0 ml 96/64 310 x 128 x 33.5 133 x 133 x 53 1 9.194 001 40.00 39.00

Cryogenic box Work2Store™, PP

All prices exclude GST and shipping. Prices valid until 31/12/13 or while stocks last. E&OE. © LabFriend – ABN: 13 149 111 919

Reduce sample handling time and the need for several racks when working with samples for cold temperature storage. Patent-pending opening and closingmechanism allows the rack to expand, creating needed room for sample manipulation. Then simply collapse the rack back to its compact form and it is ready forthe freezer. Temperature range -80 to 121°C.- Clear lid locks the rack together for safe handling and transportation- Wells have a center depression to stabilize conical tubes and a cryogenic vial lock for one handed cap removal- Stackable, autoclavable and with alphanumeric well identification- Will fit into standard 2" (52mm) freezer racking

-3%

Documents

Labfriend spring 2013 specials