2
Plast-0-Matic Valves Inc. had introduced a line of fail-safe actu- ated ball valves constructed of Corzan CPVC for use in applica- tions that require elevated tem- peratures and corrosion resistance. The all-Corzan ball valves are designed for on/off service; the actuator will close the valve auto- matically in the event of a power failure. In applications where the valve should not close, such as water-cooled processes, the actua- tor can be modified to open the valve automatically during a power loss. A manual override is also available. The valves are avail- able in %-in. through 2-in. sizes with a variety of connection types. Circle 411 on the reader service card ELECTROCOATING RECTIFIER Spang Power Electronics Mentor, Ohio Spang Power Electronics has developed the Digi-Coat Electrocoating Rectifier, a net- work-connectable, digitally con- trolled model in standard output sizes covering a wide range of electrocoating needs. Built on solid, cost-effective 6-pulse tech- nology, the rectifier outputs 0- to 440-V DC of precisely controlled power for industrially electrocoat- ing applications. It is available in 100 to 1,200 A models and pro- vides a compact, versatile pack- age with control features driven by sophisticated microprocessor A technology. A Circle 412 on the reader service card 1 IAGOMTDGY DGAWDDWN 1 MACHINE Paul N. Gardner Co. Inc. Pompano Beach, Flu. Auto-Draw III is a motorized drawdown machine that is afford- ings laboratory. It was designed to able for even the smallest coat- eliminate human variables and to RECOVER NICKEL All Your Dragout. The least Expensive Way- Over 10 years of use has proven that the Evaporative Tank”+’ will recover all your dragout so inexpensively that your payback can be as quick as 30 days! And use the ET III-W for dewaterina waste water. POLY PRODUCTS, INC. 777 E. 82nd St. . Cleveland, OH 44 1’03 h (216/391-7659 l fax: 216-881-8991 “Ivucil LI patent #4,7 1”,1.,-. *And - Chrsme Literature Requests Ordy - (216) 391- POLY e-mail: [email protected] l WWW&-pdUCtS.COtll l Copper l Zinc l Chrome Etch, Etc. Circle 043 on reader card or go to www.thru.to/webconnect 1 CLARIFIERS . 5-1000 GPM flow l Parallel plate design for efficient solids settling with I removable plate racks l Floculation tank with mixer is standard l Optional catwalk and ladder available l Heavy duty epoxy coated steel construction l Meets EPA discharge limits r for industrial waste water SLUDGEDRYERS l 1-75 cu. ft capacity - Uses low cost gas, steam, hot water or electrical heat source to reduce sludge up to 75% l Stainless steel internal parts - Space savmo design allows unit to fit under the filter press or elsewhere in the plant - Meets EPA requirement for sludge reduction WASTE I 1 TREATMENT SYSTEMS l l-300 GPM flow l Skid mounted or component installation in your plant l EPA compliance our specialty FILTER PRESSES . .5-200 cu. ft. capacity l Automatic hydraulic closure or our cost saving manual closure l Heavy duty steel construction l Polypro gasketed or diaphram membrane plates l Standard sizes or custom built to your specs l Used in EPA appioved_ treatment systems Competitive Prices l Fast Delivery l Excellent tleetlty 777 E 82 St., Cleveland, Ohio 44103 216-661-7900 l Fax: 216-661-6950 http://ww.metchem.com e-mail: [email protected] Circle 038 on reader card or go to www.thru.to/webconnect January 2003 75

Laboratory drawdown machine

Embed Size (px)

Citation preview

Page 1: Laboratory drawdown machine

Plast-0-Matic Valves Inc. had introduced a line of fail-safe actu- ated ball valves constructed of Corzan CPVC for use in applica- tions that require elevated tem- peratures and corrosion resistance. The all-Corzan ball valves are designed for on/off service; the actuator will close the valve auto- matically in the event of a power failure. In applications where the valve should not close, such as water-cooled processes, the actua- tor can be modified to open the valve automatically during a power loss. A manual override is also available. The valves are avail- able in %-in. through 2-in. sizes with a variety of connection types.

Circle 411 on the reader service card

ELECTROCOATING RECTIFIER

Spang Power Electronics

Mentor, Ohio

Spang Power Electronics has developed the Digi-Coat Electrocoating Rectifier, a net- work-connectable, digitally con- trolled model in standard output sizes covering a wide range of electrocoating needs. Built on solid, cost-effective 6-pulse tech- nology, the rectifier outputs 0- to 440-V DC of precisely controlled power for industrially electrocoat- ing applications. It is available in 100 to 1,200 A models and pro- vides a compact, versatile pack- age with control features driven

by sophisticated microprocessor A technology. A Circle 412 on the reader service card 1

IAGOMTDGY DGAWDDWN 1 MACHINE Paul N. Gardner Co. Inc.

Pompano Beach, Flu.

Auto-Draw III is a motorized drawdown machine that is afford- ings laboratory. It was designed to able for even the smallest coat- eliminate human variables and to

RECOVER NICKEL All Your Dragout. The least Expensive Way-

Over 10 years of use has proven that the

Evaporative Tank”+’ will recover all your

dragout so inexpensively that your payback

can be as quick as 30 days!

And use the ET III-W for

dewaterina waste water.

POLY PRODUCTS, INC. 777 E. 82nd St. . Cleveland, OH 44 1’03

h (216/391-7659 l fax: 216-881-8991

“Ivucil LI patent #4,7 1”,1.,-.

*And - Chrsme Literature Requests Ordy - (216) 391- POLY

e-mail: [email protected] l WWW&-pdUCtS.COtll l Copper l Zinc

l Chrome Etch, Etc.

Circle 043 on reader card or go to www.thru.to/webconnect

1 CLARIFIERS . 5-1000 GPM flow l Parallel plate design for

efficient solids settling with

I removable plate racks l Floculation tank with mixer

is standard l Optional catwalk and ladder

available l Heavy duty epoxy coated

steel construction l Meets EPA discharge limits

r for industrial waste water SLUDGE DRYERS l 1-75 cu. ft

capacity - Uses low cost gas,

steam, hot water or electrical heat source to reduce sludge up to 75%

l Stainless steel internal parts

- Space savmo design allows unit to fit under the filter press or elsewhere in the plant

- Meets EPA requirement for sludge reduction

WASTE I 1 TREATMENT SYSTEMS l l-300 GPM flow l Skid mounted or

component installation in your plant

l EPA compliance our specialty

FILTER PRESSES . .5-200 cu. ft.

capacity l Automatic

hydraulic closure or our cost saving manual closure

l Heavy duty steel construction l Polypro gasketed or diaphram membrane plates l Standard sizes or custom built to your specs l Used in EPA appioved_ treatment systems

Competitive Prices l Fast Delivery l Excellent tleetlty 777 E 82 St., Cleveland, Ohio 44103 216-661-7900 l Fax: 216-661-6950 http://ww.metchem.com e-mail: [email protected]

Circle 038 on reader card or go to www.thru.to/webconnect

January 2003 75

Page 2: Laboratory drawdown machine

create laboratory precision sam- ples. This simple instrument is the latest addition to a line of drawdown sampling devices and allow the scientist to produce accurate, repeatable drawdowns time after time at an economical price. Samples can be produced up to B1Y2 x 13 in.

Circle 413 on the reader service card

ABRASIVE GRAIN

VSM Abrasives Corp.

O%allen, MO.

VSM’s CompactGrain increases belt and disk life in polishing applications by 3 to 10 times when compared to conventional abrasives. It uses a unique granu- late consisting of many abrasive grains bonded together, which allows the product to systemati- cally wear by constantly regener-

r 1111~~1111111_~11111~~~~~

I 1 . Recovery of precious metals from plating Less money down the drain, more profits 1

I solutions and compounds- gold, silver, in yourpocket. That’s the Sabin solution. 1

I platinum, palladium, ruthenium

We offer you the same high standards and 1

1 s Maximum returns, responsive service sound assaying and processing practices that I

I -value and integrity for more than half we’ve provided customers for over 50 years. I

I a century Contact us today for full details, including I I n Unique zero discharge processing assures a no-obligation precious metal recovery I

I I

your peace of mind evaluation at your facility. I I

300 Pantigo Place, Suite 102 -Fast Hampton. NY I1937 Telephone: 631-329-1717 *Fan: 631.329-1985 - Webwe: www wbinmetakom Main Plant&ales Otiice: 1647 Wheatland Center Road * Sconsville. NY 14546 Telephone: 585-538-2194. Fax. S85-S38-2593 Additional Facilities: Williston, ND - Cobalt, Ontario. Canada

Additional Facilities: Cobalt, Ontario, Canada - Williston, ND

well as off hand and disk polish- ing. It is available in aluminum oxide and silicon carbide grain and can be produced in belt and disk forms. Products include KK718X for wet grinding appli- cations and KK712X for provid- ing a uniform scratch pattern for metal applications.

Circle 414 on the reader service card

PORTABLE VISCOSITY TESTERS

Kernco Instruments Co. Inc.

El Paso, Texas

ating new sharp grinding points throughout the finishing process. This regeneration produces a con- sistent surface roughness throughout its long life. The con- struction works well in mechani- cal applications, such as robotic, flat, and centerless grinding, as

Kernco Instruments is offering two new Viscosity Testers, Models 36AlO and 36Al1, designed for measuring viscosity in various industries. Viscosity control in every stage of process- ing is possible. These testers are simple to use, allowing the user quick and accurate measure- ments using only one hand. They are designed for on-the-spot measurements in the plant, labo- ratory, or out in the field. Each model comes with three inter- changeable rotors and operates on four AA batteries.

Circle 415 on the reader service card

PLURAL-COMPONENT

PROPOBTIONER

Grace Inc.

Minneapolis The Grace Xtreme Mix propor- tioner, significantly smaller and lighter than current plural-com-

Circle 050 on reader card or go to www.thru.to/webconnect

Metal Finishing