Ladders & Scaffolding - Whole of House - Bunnings

Ladders & Scaffolding

The Offer

Products covered in this package:

• Single Sided Ladders

• Double Sided Ladders

• Dual Purpose Step Ladders

• Platform Ladders

• Extension Ladders

• Single Ladders

• Work Platforms and Planks

• Multipurpose Ladders

• Orders Pickers

• Ladder Accessories

• Scaffolding

Considerations:

Based on the 4:1 ratio, an extension ladder should be positioned one (1) metre out from the wall for every four (4) metres in supported ladder length.

If using to climb onto a surface (e.g. a roof) always extend the ladder at least one (1) metre past the point of support (e.g. gutter/edge of roof) and ensure the

ladder is positioned on firm, even ground.

Common Heights

Stepladder – height to reach and size to purchase

Extension Ladder – height to reach and size to purchase

How to Choose the Right Ladder

How to Choose the Right Ladder Cont.

Aluminum or Fibreglass ?

Fibreglass • Recommended and in most cases mandatory when working in an electrical environment

• Provides isolation between the user and

earth, reducing the risk of electrocution

Aluminum • Provides little electrical isolation for users therefore not recommended for use in electrical environments

• Lighter than fibreglass

Load Rating or Duty Rating?

Load Rating • Is the maximum safe working load of the ladder.

• Includes the weight of the user and the tool and equipment carried

• Minimum load rating in all work places is 120kg

Duty Rating • assigned by manufacturer based on the products design parameters

• Two types of duty rating – Domestic and Industrial

• Workplaces can only use ladders with Industrial duty rating

Bailey Product Features

Gorilla Product Features Tool Cap Organiser

Anti-Slip Treads

Patented Resin Bracing System

Roll-Locked D-Rungs

Stabiliser Mounting

Internal Spreader

Non-Slip Heavy Duty Platform

900mm High Handrail

Wheel-Kit Ready Brackets

On Aluminium and Fibreglass Industrial Single Sided Ladders

Minimises slipping. Featured on all Gorilla Ladder Models.

Increases durability and strength to lower stile.

For added strength, rigidity and durability on all Industrial Extension Ladders

Factory produced mounting holes allow for easy fitting of stabiliser.

Packs away inside ladder stiles to prevent fouling.

Large non-slip platform surface for added safety when working at heights.

Heavy duty aluminium handrail fitted to all Gorilla platform ladders.

Steel Brackets factory fitted for easy installation of wheel-kit at any time.

Single Sided Ladders A general purpose stepladder accessed from one side only

Single Sided Step Ladder with Tray 120kg

PRODUCT

CODE

ITEM

NUMBER SIZE MATERIAL CAPACITY

M003-C 0861848 0.9m (3ft) Aluminium 120kg Industrial



PRODUCT

CODE

ITEM


M004-CWT 0860345 1.2m (4ft) Alum With Paint Tray 120kg Industrial



PRODUCT

CODE

ITEM


FM006-C 0860113 1.8m (6ft) Black Fibreglass 120kg Industrial

M006-CWT

FM006-C

Fibreglass Single Sided Step Ladder 120kg

MOO3-C

Single Sided Step Ladder 120kg

Features & Benefits

• Cross Brace Spreader.

• Light Weight.

• Non-Slip treads.

• Aluminium Top Cap (excludes model FM006-C).

• Stabiliser Ready on all models over 6ft.

• Paint Tray on all CWT models

Single Sided Ladders

PRODUCT CODE ITEM


FM006-I 0862137 1.8m (6ft) Fibreglass 150kg Industrial



PRODUCT CODE ITEM


M006-I 0861953 1.8m (6ft) Aluminium 150kg Industrial

M008-I 0860359 2.4m (8ft) Aluminium 150kg Industrial M008-I

FM008-1

Single Sided Step Ladder 150kg

Fibreglass Single Sided Step Ladder 150kg

Features & Benefits


• Light Weight.


• Aluminium Top Cap (excludes model FM006-C)


Product Features - XHD

• All welded aluminium construction (extra strong)

• 150kg load rating and Industrial duty rated

• Rectangular hollow stile blackleg for greater load bearing strength & stability

• XHD aluminium Stiles & Treads

• Anti slip feet

• Made to Aus standards AS/NZS 1892.1


PRODUCT

CODE

ITEM


FS10661 0860647 1.8m(6ft) Aluminium 150kg Industrial

FS10765 0860657 2.1m (7ft) Aluminium 150kg Industrial




Single Sided Extra Heavy Duty (XHD) – Aluminium 150kg Single Sided Step Ladder

FS10661


PRODUCT

CODE

ITEM



FS13380 0860574 1.8m(6ft) Aluminium 150kg Industrial





FS13380

Professional 150kg Single Sided Step Ladder

Product Features - Professional

• Punchlock™ tread design & fascia top cap


• Heavy duty extruded aluminium construction with additional “Tri-brace” tread

bracing

• Includes “Quicklock™” internal arm system

• Anti slip feet


PRODUCT

CODE

ITEM


FS13426 0860616 1.8M (6ft) Aluminium 150kg Industrial


FS13426


Trade 150kg Single Sided Step Ladder

Product Features - Trade

• Riveted Construction

• Heavy Duty, 150kg load rating and Industrial duty rated

• Heavy duty extruded aluminium construction with additional “Tri-brace” tread bracing

• Includes “Quicklock™” internal arm system providing extra stability & resistance to

ladder walk

• Anti slip feet

• Made to Australian standards AS/NZS 1892.1

PRODUCT

CODE

ITEM


FS10490 0860453 0.9M (3ft) Fibreglass 150kg Industrial

FS10491 0860455 1.2m (4ft) Fibreglass 150kg Industrial

FS10492 0860457 1.8m(6ft) Fibreglass 150kg Industrial






Fibreglass 150kg Single Sided Step Ladder

FS10492

Product Features - Fibreglass • Punchlock™ tread design & fascia top cap increase the torsional rigidity of the

overall ladder frame


• Strong, fibreglass construction with triangular plate bracing

• Electro-Safe

• Anti slip rubber “boots” for maximum grip & protection of Stiles

• Internal spreader arms, heavy duty steel- cross braced. (available on models

1.8 to3.6)


Double Sided Ladders An ‘A’ frame stepladder which allows access from both sides

PRODUCT

CODE

ITEM


SM003-C 861856 0.9m (3ft) Aluminium 120kg Industrial



PRODUCT

CODE

ITEM


FSM003-C 860115 0.9m (3ft) Black fibreglass 120kg Industrial



SM008-C

FSM004-C

Double Sided Step Ladder 120kg

Fibreglass Double Sided Step Ladder 120kg

Features & Benefits


• Light Weight.


• Aluminium Top Cap (excludes model FSM004-C)


• Patented Resin Bracing system on all 150kg Models over 4ft.

PRODUCT CODE ITEM NUMBER SIZE MATERIAL CAPACITY

FSM003-I 861903 0.9m (3ft) Fibreglass 150kg Industrial






Double Sided Ladders


SM003-I 860349 0.9m (3ft) Aluminium 150kg Industrial





Double Sided Step Ladder 150kg

Fibreglass Double Sided Step Ladder 150kg

SM006-I

FSM008-I

Features & Benefits


• Light Weight.


• Aluminium Top Cap (Excluding Fibreglass)


• Patented Resin Bracing system on all 150kg Models over 4ft.


PRODUCT

CODE

ITEM









PRODUCT

CODE

ITEM











Professional 170kg Double Sided Ladder

Professional 150kg Double Sided Step Ladder

FS13423

FS13386

Product Features - Professional • Punchlock™ tread design & deep fascia top cap

• 150kg or 170kg load rating and Industrial duty rated

• Heavy duty extruded aluminium construction with additional “Tri-brace”

tread bracing

• Interlocking top caps for added strength and durability

• Internal spreader arms, heavy duty steel- cross braced. (available on

models 1.8 to 3.6)

• Anti slip feet with reinforcing plates



PRODUCT

CODE

ITEM








Double Sided Extra Heavy Duty Aluminium 150kg Double Sided Step Ladder

FS10005

Product Features - XHD • All welded aluminium construction (extra strong)


• XHD aluminium Stiles & Treads

• Anti slip feet



PRODUCT

CODE

ITEM




FS13393

Professional 150kg Big Top Double Sided Step Ladder

Product Features - Professional • Punchlock™ tread design & deep fascia top cap increase the torsional rigidity of the overall ladder frame

• 150kg or 170kg load rating and Industrial duty rated

• Heavy duty extruded aluminium construction with additional “Tri-brace” tread bracing

• Interlocking top caps for added strength and durability

• Internal spreader arms, heavy duty steel- cross braced. (available on models 1.8 to3.6)

• Anti slip feet with reinforcing plates to prevent foot twist


Double Sided Ladders.

PRODUCT

CODE

ITEM






FS13428

Trade 150kg Big Top Double Sided Step Ladder

Product Features - Trade • Riveted Construction


• Heavy duty extruded aluminium construction with additional “Tri-brace”

tread bracing

• Internal spreader arms, heavy duty steel- cross braced. (available on

models 1.8 to 2.4)


• Anti slip feet



PRODUCT

CODE

ITEM









Fibreglass 150kg Double Sided Step Ladder

FS10485 Product Features - Fibreglass • Punchlock™ tread design & fascia top cap for increased torsional


• Fibreglass construction with triangular plate bracing

• Electro-Safe

• Interlocking top caps for added strength & stability

• Anti slip rubber “boots” for maximum grip

• Internal spreader arms, heavy duty steel- cross braced. (available

on models 1.8 to3.6)


Dual Purpose Step Ladders converts from a stepladder to a straight ladder

PRODUCT

CODE ITEM NUMBER SIZE MATERIAL CAPACITY

FDM006-C 860116 1.8-3.2m (6-11ft) Black fibreglass 120kg Industrial

PRODUCT CODE ITEM


DM006-I 862098 1.8-3.3m (6-11ft) Aluminium 150kg Industrial



Fibreglass Dual Purpose Step Ladder 120kg

Dual Purpose Step Ladder 150kg

FDMOO6-C

DMOO6-I

Features & Benefits


• Light Weight.


• Aluminium Top Cap

• Stabiliser Ready

• Double sided ladder in A-Frame Position


FDM006-I 861929 1.8-3.3m (6-11ft) Fibreglass 150kg Industrial

FDM007-I 861937 2.1-3.9m (7-13ft) Fibreglass 150kg Industrial

Dual Purpose Step Ladders

FDMOO7-I

Fibreglass Dual Purpose Step Ladder 150kg

Features & Benefits


• Light Weight.


• Aluminium Top Cap

• Stabiliser Ready

• Double sided ladder in A-Frame Position


PRODUCT

CODE

ITEM


FS13395 0860395 1.8 -3.2m (6 -10ft) Aluminium 150kg Industrial

FS13396 0860524 2.1-3.8m (7-12ft) Aluminium 150kg Industrial


Professional 150kg Dual Purpose Step Ladder

FS13395

Product Features - Professional

• Punchlock™ tread design & deep fascia top cap


• Strong aluminium construction

• Converts from Stepladder to single ladder, automatically latches in straight position by

lock & release system

• Converts back to a stepladder with press of a button

• Tapered legs for added stability

• Anti slip feet



PRODUCT

CODE

ITEM


FS13432 0860527 1.8 -3.2m (6 -10ft) Aluminium 150kg Industrial


FS13434 0860531 2.4-4.4m (8-14ft) Aluminium 150kg Industrial FS13434

Trade 150kg Dual Purpose Step Ladder

Product Features - Trade

• Riveted Construction


• Highly versatile easily converting from

• Internal spreader arms, heavy duty steel- cross braced.

(available on models 1.8 to 2.4)


• Anti slip feet


PRODUCT CODE ITEM


FS10480 0860514 1.8 -3.2m (6 -10ft) Fibreglass 120kg Industrial

FS10481 0860516 2.1-3.8m (7-12ft) Fibreglass 120kg Industrial



FS10480

Product Features - Fibreglass

• Punchlock™ tread design & fascia top cap for increased torsional


• Strong fibreglass construction

• Electro-Safe

• Easily converts from Step to Single Ladder

• Strong & safe straight ladder position latched by heavy duty locking hooks

and full step overlapping construction

• Tapered back legs provide added stability when used as a step ladder

• Anti slip rubber “boots” for maximum grip


Platform Ladders Provides a safe work platform. Can be closed for storage.

PRODUCT

CODE

ITEM


PL003-I 860022 0.9m (3ft) Aluminium 150kg Industrial




PL-BOOM 860354 N/A Steel N/A

PL-TOE 860356 N/A Aluminium N/A

PL-TRAY 860357 N/A Aluminium N/A

Platform Ladder 150kg Platform Ladder Accessories

PL004-I

PL003-I

Safety Boom PL-BOOM

Platform Toe Stop PL-TOE

Hand Rail Work Tray PL-TRAY

Features & Benefits

• 900mm hand rail meets OH&S requirements.

• Non-Slip treads and platform surface.

• Patented resin bracing system

• Wheel-Kit Ready

Factory Fitted Wheel Brackets

Platform Ladders


FPL002-I 860069 0.6m (2ft) Fibreglass 150kg Industrial






Fibreglass Platform Ladder 150kg FPL003-I

FPL005-I

Features & Benefits

• 900mm hand rail meets OH&S requirements.

• Non-Slip treads and platform surface.

• Patented resin bracing system

• Non-Marking Rubber feet

• Wheel-Kit Ready

Platform Ladders

PRODUCT

CODE

ITEM








PRODUCT

CODE

ITEM







Professional 170kg Platform Stepladder with Safety Gate

Professional 170kg Platform Stepladder

FS13452

FS13400

Product features – Professional

• Punchlock™ tread design to increase torsion strength

• Heavy duty 170kg load rating & industrial rating

• HD extruded aluminium construction with “Tri-bracing tread brace

• Welded rear frame for strength and durability

• Safety gate for added safety on platform stepladders

• Wide anti slip platform

• Multi function handrail/accessories holder

• 900mm handrail height from platform

• Anti slip rubber feet

• Made to Aus standards AS/NZ 1892.1

• Available-optional retractable castor/Wheel kits

PRODUCT

CODE

ITEM









Platform Ladders

Heavy Duty Platform Stepladder 150kg

FS10715


• Strong welded aluminium construction

• Heavy duty 150kg load & industrial rating

• Fully welded front & rear frame for strength and durability

• Wide aluminium anti slip platform






PRODUCT

CODE

ITEM


FS13327 0860270 0.86m (2.8ft) Aluminium 150kg Industrial




Platform Ladder cont.

Trade 150kg Platform Step Ladder

FS13328


• Industry Duty Rated. Designed for use on industrial work sites

• 150kg load rating

• Strong Henrob riveted aluminium construction with additional tread bracing

• Welded rear frame for strength and durability






• Available-optional “fold away” safety gate

PRODUCT

CODE

ITEM










Fibreglass 150kg Platform Step Ladder

Product features – Professional (without safety gate)



• HD Strong Fibreglass Construction with Triangular plate bracing

• Electro –Safe

• Wide anti slip platform (490x400mm) for a secure work area



• Multi function polypropylene handrail/accessories holder


• Anti slip rubber “Boots”



• Available optional “fold away” safety gate

PRODUCT

CODE

ITEM









Fibreglass 150kg Platform Step Ladder with Safety Gate

Product features – Professional (with safety gate)



• HD Strong Fibreglass Construction with Triangular plate bracing

• Electro –Safe

• Wide anti slip platform (490x400mm) for a secure work area



• Multi function polypropylene handrail/accessories holder





Extension Ladder

Height adjustable. Designed for height access for builders, carpenters and plumbers

PRODUCT

CODE

ITEM


FEL10/17-I 860018 3.1-5.3m (10-17ft) Fibreglass 130kg Industrial

FEL12/21-I 861945 3.7-6.5m (12-21ft) Fibreglass 130kg Industrial

FELP10/17-I 860365 3.1-5.3m (10-17ft) Fibreglass 130kg Industrial

FELP12/21-I 860366 3.7-6.5m (12-21ft) Fibreglass 130kg Industrial

PRODUCT

CODE

ITEM


FEL12/21-C 860380 3.7-6.5m (12-21ft) Black fibreglass 120kg Industrial

Fibreglass Extension Ladder 120kg

Fibreglass Extension Ladder 130kg

FEL 12/21-C FELP10/17-I

Features & Benefits

• Single rope Pull & Release.

• Strong Roll-Locked D-Rungs.

• Stabiliser Ready.

Extension Ladder cont.

PRODUCT

CODE

ITEM


EL8/13-I 860111 2.4-3.9m (8-13ft) Aluminium 150kg Industrial



PRODUCT

CODE

ITEM


AS-300 861880 N/A Aluminium N/A

POLEM-01 860358 N/A Aluminium N/A

Extension Ladder 150kg

EL10/17-I

Extension Ladder Accessories

Stabiliser AS-300

Pole Mount POLEM-01

Features & Benefits

• Single rope Pull & Release.

• Strong Roll-Locked D-Rungs.

• Stabiliser Ready.

Extension Ladder

PRODUCT

CODE

ITEM


FS13462 0860565 3.2-5.0m (10ft) Aluminium 130kg Industrial


Professional 130kg Extension Ladder with Leveller

FS13463

Product features – Professional • Punchlock™ flat “D” shaped rungs for secure footing




• Factory fitted automatic ladder levelling system allows for safe use on uneven surfaces.

• Interlocking stiles and swaged rung to settle joint for maximum resistance to twist & side sway

• Corrosion resistant aluminium

• Patented convenient side pulley and rope extension system to keep rope away from users feet

• Bailey Level-Eze ladder leveller and accessories available



Extension Ladder

PRODUCT

CODE

ITEM














Professional 150kg Extension Ladder

PRODUCT

CODE

ITEM

NUMBER DESCRIPTION

FS22943 0861822 Bailey Level-Eze Ladder Leveller

FS22963 0861814 Professional 150kg Adaptor Kit

FS22944 0861822 Fibreglass 130kg Adaptor Kit

Extension Ladder Accessories

FS13411

Product features – Professional • Industry Duty Rated. Designed for use on industrial work sites


• XHD strong, aluminium construction

• Interlocking stiles and swaged rung to settle joint for maximum resistance to twist & side sway

• Corrosion resistant aluminium






PRODUCT

CODE

ITEM








Fibreglass 150kg Extension Ladder (FXN) FS20186

Product features – Professional • Industry Duty Rated. Designed for use on industrial work sites

• 130kg load rating on sizes 8’, 10’, 12,’ 13’, & 14’

• 125kg load rating on sizes 16’ & 19’

• XHD fibreglass construction resists sway, turn & flex

• Electro-Safe

• Complete with pole chain and hoop as standard

• Rungs top-hat riveted for resistance to twist and sway

• Convenient side pulley and rope extension system

• A range of pole support devices can be fitted to this ladder to suit your needs (made to order or

supplied as accessories)


• Anti slip rubber “Boots” with reinforcing plates



PRODUCT

CODE

ITEM








Fibreglass 130kg Extension Ladder (FSXN) with V Bracket

FS20408


• Punchlock™ flat “D” shaped rungs for secure footing



• 125kg load rating on sizes 16’

• XHD fibreglass construction resists sway, turn & flex

• Electro-Safe


• Fitted with pole support “V” bracket


• Anti slip rubber “Boots” with reinforcing plates



PRODUCT

CODE

ITEM








Fibreglass 130kg Extension Ladder (FSXN)

FS20324


• Punchlock™ flat “D” shaped rungs for secure footing



• 125kg load rating on sizes 16’


• Electro-Safe





Single Ladder Fixed Length. Designed for height access for builders, carpenters and plumbers

PRODUCT

CODE

ITEM


SBL008-I 0860372 2.4m (8ft) Aluminium 140kg Industrial









Single Builders Ladders

SBL015-I

SBL010-I SBL008-I

Features & Benefits

• Strong Roll-Locked D-Rung tread steps

• Industrial Duty, designed for use on Industrial

Work sites

Single Ladder

PRODUCT

CODE

ITEM





FS20336 0860632 4.40 (14ft) Fibreglass 130kg Industrial


Fibreglass 130kg Single Ladder

FS20333





• Electro-Safe




Single Ladder

PRODUCT

CODE

ITEM









Professional 150kg Single Ladder

FS20283

Product features – Professional • Punchlock™ flat “D” shaped rungs for secure footing




• Extra strong corrosion resistant aluminium construction

• XHD aluminium stiles & treads


• Anti slip rubber feet with reinforcing plates


http://www.vetner.com.au/media/pics/site/imagecache/C/C/CC4880C9990F662E022CEC433A16C642.jpg

Work Platforms Foldable work platforms designed for ease of portability

PRODUCT

CODE

ITEM


MW105-CWB 0860813 0.6-0.9m (2-3ft) Aluminium 120kg Contractor

MW010-I 0860167 0.6-0.9m (2-3ft) Aluminium 150kg Industrial

MW105-I450 0860409 0.6-0.9m (2-3ft) Aluminium 150kg Industrial

FMW105-I450 0860411 0.5m (3ft) Fibreglass 150kg Industrial

MW010-I450 0860412 0.6-0.9m (2-3ft) Aluminium 150kg Industrial

Paint Platform 120kg MW105-CWB

Heavy Duty Extendable Work Platform MW010-I

Wide Paint Platform 150kg MW105-I450

Wide Fibreglass Paint Platform 150kg MW105-I450

Wide Heavy Duty Extendable Work Platform MW10-I450

Work Platforms

PRODUCT

CODE

ITEM


FS13266 0860168 0.51m Aluminium 150kg Industrial

FS13352 0860510 0.65-0.88m Aluminium 260kg Work Loading Limit

FS10306 0860681 0.6m (2ft) Aluminium 225kg Work Loading Limit

Handi – Stand Mobile Work Platform FS10306

Handi-Stand mobile temporary work platform

• Designed with the simple “Tilt and G” wheel system

• 225kg Working Load Limit (W.L.L.)

• Folds up when not in use for easy storage and transportation

• Large stable working platform (1033mm x 480mm

• Fully welded frame & heavy duty plank section

• Designed for Industrial & Trade applications

Work Platforms

PRODUCT

CODE

ITEM



FS13352 0860510 0.65-0.88m Aluminium 260kg Work Loading Limit

FS10306 0860681 0.6m (2ft) Aluminium 225kg Work Loading Limit

Xtenda Plank FS13352

Work Platform 150kg with Tray FS13266

Xtenda Plank

• Telescopic design quickly adjusts to required working length & height


• Plank extends from 1.2m to 1.96m in 6mm increments

• Height adjusts from 650mm to 880mm in 6mm increments

• Self Latching independent leg adjustments with manual safety lock

• Duel pin locking system on folding legs for increased safety, with

single hand release system

• Anti slip boots for added safety

Work Platform - Trade

• Industrial duty rated


• Light strong aluminium construction

• Compact and easily portable

• Provides a 1m work zone

• Platform height is 510mm

• Tool tray provides handy storage of tools & paint cans (fits up to 4L of paint)

Safer, more efficient work platform. Easy to transport, store & erect

• Erected in under 2 minutes, single person operation

• Telescopic mechanism allows for 3 adjustable platform heights

• Folds down for ease of transportation and storage

• Spacious platform (600mm X 600mm) offers comfortable work station

• 360° fall protection due to lockable guard rails on all four sides

• Industrial Rated, Medium Duty. 150kg Max Load.

• Approved to : AS/NZ 1576.1 – 2010

AS/NZ 1576.3 – 1995

Work Platforms

PRODUCT

CODE

ITEM

NUMBER

PLATFORM

HEIGHTS

MAX HEIGHT

INC. RAILS MATERIAL CAPACITY

TP001 0860829 0.57 / 0.82 /

0.99 m 1.91 m Aluminium 150kg

Folded down – handle & wheels allow easy transportation →→→

Safer, more efficient work platform. Easy to transport, store & erect



• Comprises only 2 parts, frame and platform. No missing bits

• Folds down for ease of transportation and storage, wheel s around

and comfortably fits in a small van or ute

• Large folding platform (1.40m X 0.70m) with climb-through hatch and

optional toe boards

• Integral platform stabilisers, stabilising legs and telescopic hand &

knee rails for maximum safety



AS/NZ 1576.3 – 1995

Work Platforms

PRODUCT

CODE

ITEM

NUMBER

PLATFORM

HEIGHTS

MAX HEIGHT

INC. RAILS

MAX

WORKING

HEIGHT

MATERIAL CAPACITY

TT002 0860828

0.33 / 0.61 / 1.00 /

1.25 / 1.50 / 1.75 /

2.00 m


The Teletower can be erected quicker than all other work

platforms

Check out the YouTube Video (link below)

Work Platforms

http://www.youtube.com/watch?v=HQWGt8wGhpw


Trestles ‘A’ Frame trestles designed to support planks typically for painting

PRODUCT

CODE

ITEM







PRODUCT

CODE

ITEM









Aluminium Trestle 120kg with Levellers

Aluminium Trestle 120kg

FS10409

FS12957

Aluminium Trestle

•120kg load rating Industrial duty rated

•Light, strong, welded aluminium construction

•Rung to stile joints are fully welded

•Large sole platers with stake holes

•Internal spreader arms – unique Bailey Design

•XHD stile & rung construction

•Made to Australian & new Zealand standards AS/NZS 1892.1

•Leveller system – 200mm total adjustment

•12mm (1/2”) adjustment increments

Planks

PRODUCT

CODE

ITEM


PLANK01-C 0860156 2.4-3.9m (8-13ft) Aluminium 260kg Industrial

PRODUCT

CODE

ITEM


PLANK01-I450 0860408 2.4-3.9m (8-13ft) Aluminium 260kg Industrial

Heavy Duty Mighty Plank Heavy Duty Plank

Planks

PRODUCT

CODE

ITEM


FS12589 0860084 3.0m Aluminium 225kg W.L.L PER 2.4m span




PRODUCT

CODE

ITEM






Economy Aluminium Plank Deluxe Aluminium Plank

FS12593 FS12589

Deluxe Aluminium Plank • Designed for industrial work sites


• Strong, triple hollow extruded aluminium construction

• Raised corrugated aluminium strips for sound footing

• Anti slip rubber strips

• High grade T6 cast alloy end caps

• Cross sectional dimensions 225mm (w) x 50mm (D)

• Made to Australian Standards AS 1577

Economy Aluminium Plank • Designed for industrial work sites


• Lightweight, yet durable corrosion resistant aluminium

construction

• Non-slip Knurled surface for sound footing

• High grade T6 cast alloy end caps

• Cross sectional dimensions 225mm (w) x 50mm (D)

• Made to Australian Standards AS 1577

Multi-Purpose Ladders Highly versatile. Has 4 configuration – A Frame, Extension, Trestle and Uneven A frame

PRODUCT

CODE

ITEM


MM11-I 860236 0.9-3.3m Aluminium 120kg Industrial

MM15-I 860081 1.2-4.5m Aluminium 120kg Industrial

Aluminium Gorilla Mighty

MM11-I

MM15-I

Features & Benefits

• Multi-Purpose Ladder - 4 configurations :

• A-Frame,

• Extension,

• Trestle,

• Uneven A-Frame (stairways)

Multi-Purpose Ladders

PRODUCT

CODE

ITEM


FS13205 0860164 1.7-3.3m Aluminium 135kg Industrial

FS13206 0860165 2.3m-7.5m Aluminium 135kg Industrial

Trade 135kg Extendable Stepladder

FS13205

FS13206

Trade extendable step ladder

• 135kg load rating, Industrial duty rated


• Tool tray can hold a 4L paint can a various tools

• The most versatile ladder you can own

• Double riveted steps for long lasting durability

• Telescopic design quickly adjusts height with spring loaded “J” locks

• Adjust angle positions easily with soft touch push knobs

• Wide flared bottom for firm support & stability

• Anti-slip feet for added safety

Order Pickers Used for moderate/frequent use stock picking applications

PRODUCT

CODE

ITEM


GOP03 0860160 0.9m (3ft) Aluminium 200kg Industrial




GOP03 GOP05

PRODUCT

CODE

ITEM


GOP04-BARRIER 860097 NA Aluminium NA



GOP-BOOM 860095 NA Aluminium NA

GOP-TRAY 860367 NA Aluminium 20kg

GOP-HANDRAIL 860368 NA Aluminium NA

Order Pickers

GOP -TRAY GOP -HANDRAIL

GOP -BOOM GOP -BARRIER

Order Pickers - Extras

Order Pickers

PRODUCT

CODE

ITEM











Deluxe Order Pickers with Safety Gate 150kg

FS10880

Deluxe Order Picker (DOP) with Safety gate – 150kg

• Industrial rated, 150kg load rating

• Extra strong aluminium construction with XHD stiles & 100mm wide treads for

durability

• Fully welded construction

• Patented automatic retracting wheel system fitted with heavy duty swivel castors

• Ideal for high frequency stock picking applications

• Easy to move & use

• 900mm high square handrail on three sides to meet work cover requirements

• Safety gate fitted as standard

• 590mm x 710mm platform for ladders up to 2.4m high

• 590mm x 910mm platform for ladders over 2.4m high


Order Pickers

PRODUCT

CODE

ITEM









Order Picker 130kg

FS10863

Order Picker (OP) MK2


• Light, strong, aluminium construction with HD stiles & treads


• Box section back legs gives greater strength & rigidity when working at heights

• Ideal for moderate stock picking applications

• Highly manoeuvrable and easy to use

• Spring loaded castors

• 900mm high square handrail designed for greater comfort & grip while climbing

• 100mm high kick plate on three sides

• Optional extra safety gate (fits in 5 mins)

• 590mm x 910mm platform for ladders over 2.4m high


Order Pickers cont.

PRODUCT

CODE

ITEM








Riveted Order Picker 130kg

FS13166

Riveted Order Picker (ROP)


• Light, strong, aluminium construction with HD stiles & treads


• Box section back legs gives greater strength & rigidity when working at heights

• Ideal for moderate stock picking applications

• Highly manoeuvrable and easy to use

• Spring loaded castors

• 900mm high square handrail designed for greater comfort & grip while climbing

• 100mm high kick plate on three sides

• Optional extra safety gate (fits in 5 mins)


Optional safety gate

Ladder Accessories

PRODUCT

CODE

ITEM


AS-400 0860072 N/A Aluminium N/A

GOR-3STAIR 0860406 0.66m (2ft) Aluminium 150kg Industrial

GOR-STEP 0860405 0.37(H) x

0.51(W) Plastic 150kg Industrial

PRODUCT

CODE ITEM NUMBER SIZE MATERIAL CAPACITY

GOR-TIEDOWN 0860407 2.0m x .22mm - 150kg Lashing

LB-01 0861898 N/A Rubber N/A

PLAT-01 0860016 0.28m x 0.28m Metal/Plastic 120kg Domestic

Safety Step GOR-STEP

Outrigger AS-400

3 Step Stair GOR-3STAIR

Tie Down Strap GOR-TIEDOWN

Platform and Project Tray PLAT-01

Bumpers LB-01

Scaffolding Safe and secure work platform for working at heights

PRODUCT

CODE

ITEM

NUMBER DESCRIPTION MATERIAL CAPACITY

GS-01 0860049 Core Pack Aluminium 225kg

GS-BUN-01 0860251 Tower Expandascaff Aluminium 225kg

GS-01A 0860117 Riser Pack Aluminium NA

GS-02 0860050 Outrigger Pack Aluminium NA

GS-03 0860051 Joiner Pack Aluminium NA

GS-KICKB 0860257 Kick Boards WOODEN NA

PRODUCT

CODE

ITEM

NUMBER DESCRITION MATERIAL CAPACITY

GS-CLAMP 0860052 Clamp 4 Pack Aluminium NA

ASL-009-I 0860053 2.6m Ladder Aluminium 140kg Industrial

ASL-015-I 0860055 4.4m Ladder Aluminium 140kg Industrial

SLA-009-I 0860369 Stand Off Arms for

ASL-009I Aluminium NA

SLA-015-I 0860370 Stand Off Arms for

ASL-015I Aluminium NA

GS-S879B 0860259 Adjustable Castors Steel frame/Poly

nylon wheel 700kg

Outrigger AS-400 Rise Pack GS-01A Outrigger Pack GS-02

Tower Expandascaff GS-BUN-01

Castors GS-S879B

Joiner Pack GS-03 Clamps GS-CLAMP

Scaffolding

PRODUCT

CODE

ITEM


FS10631 0860001 Base Pack Aluminium 225kg Working Load Limit

FS10632 0860002 Extension Pack Aluminium 225kg Working Load Limit

FS10666 0860006 Guard Rail Pack w/ Stabilisers Aluminium 225kg Working Load Limit

FS23045 0860003 Adjustable Leg Pack Aluminium 225kg Working Load Limit

FS10636 0860005 Access Ladder Aluminium 225kg Working Load Limit

PRODUCT

CODE

ITEM


FS10903 0860682 Base Pack Aluminium 225kg Working Load Limit

FS10905 0860684 Extension Pack Aluminium 225kg Working Load Limit

FS10904 0860683 Guard Rail Pack Aluminium 225kg Working Load Limit

FS10970 0860685 Stabiliser Pack Aluminium 225kg Working Load Limit

FS10971 0860686 Access Ladder Aluminium 225kg Working Load Limit

Mini Rise Mobile Scaffolding Rapid Rise Mobile Scaffolding

Safer, more efficient scaffold. Easy to transport, store & erect



• Comprises only 2 parts, frame and platform. No missing bits

• Folds down for ease of transportation and storage, wheel s around

and comfortably fits in a small van or ute

• Large folding platform (1.40m X 0.70m) with climb-through hatch and

optional toe boards

• Integral platform stabilisers, stabilising legs and telescopic hand &

knee rails for maximum safety



AS/NZ 1576.3 – 1995

Scaffolding

PRODUCT

CODE

ITEM

NUMBER

PLATFORM

HEIGHTS

MAX HEIGHT

INC. RAILS

MAX

WORKING

HEIGHT

MATERIAL CAPACITY

TT002 0860828

0.33 / 0.61 / 1.00 /

1.25 / 1.50 / 1.75 /

2.00 m


The Teletower can be erected quicker

than all other work platforms

Check out the YouTube Video (link

below)

Scaffolding / Work Platforms



Can we help?

Check out the range Instore, contact your local Bunnings Account Manager

or call 133 062

Documents

Ladders & Scaffolding - Whole of House - Bunnings