Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Concept Lambda 425 HFM
Male and Female HFM® Contact Kit assembling
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 2
Components HFM® – High-Speed FAKRA-Mini
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 3
Lambda 4 Series
Advanced Line
Semiautomatic wire processing
Modular system / platform with standard modules and special modules
Faster transfer that can be positioned anywhere
Komax TopSys control architecture
Flexible area of application
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 4
Layout
- openshield
- bent braidbackwards
- zerocut
stripping ofDielectricand foil
crimpingCentercontact
2 sec
semi jacketstrip
- crimping- crimpingsupportsleeve
- Jacketremoval
Load
3 sec4 sec 4 sec 2 sec
ca. 4 secca. 8 secca. 8 sec
cycle time: ca. 8 sec
Dimension:
Length: 2400mm
Width: 1000mm
Height: 2110mm
LW
H
vision check
assembly &crimping ofouter contact
2 sec
4 sec
option:interfacevision check
bad partcutter
ca. 8 sec
2 sec
Unload
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 5
Process steps
1. Strip & semi-jacket-strip
• A semi-strip of the jacket is recommended as support for crimping support sleeve
2. Crimping of support sleeve
• crimp support sleeve onto the cable braid
• Full jacket removal
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 6
Process steps
3. Open braided shield & bent braid backwards
• The braid ends will bent backwards over the support sleeve
• Application of Komax SLE patent iris braid opening
and folding
• Perform zerocut
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 7
Process steps
4. Stripping of dielectric and foil
• Cable stripping as required
5. Crimping of center contact
• Crimpmachine with CFA
• Quick applicator exchange
• Strip cutter
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 8
Process steps
6. Vision Check
• Position and dimension control
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 9
Process steps
7. Assembly & Crimping of outer contact
• Crimped center contact will be loaded in the outer contact
• After reaching the desired position of the inner conductor, the outer contact will be crimped
• Komax special feedback inserting system
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 10
Process steps
8. Bad part cutter
• The cable assemblies that were assigned as bad parts during processing are cut.
廣州
德力
達
Tech
Lea
der
德力達智能
8 June, 2018 / HFM® Contact Kit assembling / Friesl / 11
Your only contact
LOK WUSales Engineer
Tech Leader Engineering Ltd.Tel:86-020-83178462Fex:86-020-62326121
Mobile +86 13450403363Email:[email protected]
www.tl-eng.net www.komaxwire.com
廣州
德力
達
Tech
Lea
der
德力達智能