Upload
larus-design
View
277
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Â
Citation preview
www.larus.pt | +351 234 520 600 09 2014
Larus is a Portuguese company that develops and produces urban furniture since 1988.Continuous investigation | design is the main reason to our growth.
“Humanize the Territory”
4km
A1 Lisboa
A25Aveiro
LARUS40º40’20 N8º28’25 O
EN1 | IC2Porto
A25Viseu
EN1| IC2Coimbra
Exit 16Viseu Albergaria-a-Velha
A1Porto
industrialarea
Viseu Albergaria
Aveiro
Toll
We are planning to extend our facilities, giving greater importance to management and social department, as well as the project team considering that product development contributes to strengthen our position on the market. It is also planned to build a design museum, an auditorium, a show-room and an area for temporary thematic exhibitions.
Larus Design Urbanocompany info
www.larus.pt | +351 234 520 600
Larus’ sustained growth is justified by its product develop-ment policy.The R&D Department includes designers, engineers and other technical experts, being a bridge between Larus’ tech-nical assets and external authors. Effort is part of everyday learning and fits into the company’s Design Management, foreseeing consolidated evolution.
We favor a permanent connection with architecture and design offices and the technical authorities.
Larus has been using a wide range of construction proces-ses: fibreglass, roto-molded plastic, metal casting, concrete conforming and others such as metalworking or carpentry thus preserving the design of industrial constraints, adopting them according to efficiency, cost control and creativity of the final solution.
R&D | Production
‘91 - National Design Award
‘93 - Design Stamps, Product Awards
‘94 - Nomination for European Design Award
‘98/99 - National Design Award (Design Global Management)
‘98/99 - National Product Design Award (Expo’98 Signalling System)
‘07 - Hall of fame (ICSID Design edition)
‘07 - Honourable Mention at the DME Award, Design Management European Award
‘08 - Red Dot Design, Award Product Design 2008, lighting and illumination category
‘09 - Sena da Silva National Design Award, winner in the company category
‘09 - Sena da Silva National Design Award, winner in the product category - Rua Series
‘10 - Bid 2010 (Ibero-american Biennal) tom paper bin, vesúvi bollard
‘10 - DME Award, European Design Management Award
‘11 - Red Dot Design Award, Honourable mention, tom paper bin
‘11 - Red Dot Design Award, Winner, + line
‘11 - Face to Face, Best Conference Award
‘12 - Nomination for German Design Award 2013
‘12 - Honourable Mention in Bid 2012 (Ibero-american Biennal)
‘14 - Red Dot Design Award with Sheet paper bin
Larus Award, In cooperation with About Green (publisher of the magazine Arquitecturas and organizer of the exhibition Urba Verde), Larus is promoting the yearly Urban Equipment Iberian Award, since 2011.
Larus Award
Awards
IPVC
FBAUL
IPCBUniversidade Lusíada
The collaboration with universities, amongst others the supervision of the Master in Design, enables Larus a continuous reflection on its own practice, along with a renewed social and aesthetic vision of consumers, commonly referred to as consumer trends. The Portuguese Design Centre recognizes Larus as an exemplar company in the design management and confirms it as the most prestigious portuguese brand in urban equipment design.
Partnerships
Larus Design UrbanoFacilities
The present building includes the manufacturing facility and all the services related to it: management, design, sales department, manufacturing department, etc.
We are planning to extend our facilities, giving greater importance to management and social department, as well as the project team. Thus, considering that innovation is the key factor in our development, it contributes to strengthenour position on the market. Larus is also planning to build a design museum, an auditorium with educational purposes, a showroom, an area for temporary thematic exhibitions, and so on.Projected by Jorge Trindade.
The company culture is a set of values and principles, which inspire and influence the collaborators and employees in their day-to-day habits and practices. Frequently, they stem from the values set by our founder, although, when the employees - its main asset – get deep into the company, they encourage new procedures to improve its operations and results, inspiring a philosophy that sets it apart from its rivals, creating sustainable competitive advantages. It is a dynamic, evolutionary, participating process, which proactively develops autonomy and responsibility in its members, as an immediate result of being a company dedicated to investigation and development.
Larus’ philosophy is displayed in the image of the company, in the logo and its use on the uniforms, in the indoor and outdoor decoration, in the language, in the calm and informal relationship between employees and with the clients, in the concern about meeting our customers’ needs, and, in an original way, in the relationship with external authors who were invited to plant the tree curtain that surrounds the facilities, thus encouraging loyalty to the company. This reflects the whole responsibility that guides Larus philosophy: beyond all the management skills, a solid sense of understanding and human comprehension, is permanently demanded.
The seagull, included in the logo, is characteristic of the Aveiro region,and is in the origin of thecompany’s name.
Larus means seagull in Latin and reflects amessage of freedom (creative ability), balance(between the company’s goals, customerand employee satisfaction and sustainabledevelopment) and environmental awareness(ecological concerns, material rationalisationand productive processes, framing of its facilitieswithin the landscape and productsuitability to the open spaces they areaimed at).
CULTURE PHILOSOPHY AND VALUES LOGO
A1
A3
A5
A7
A9
A11
A13
A15
A17
A19
A21
A23
A25
A37
A39
A41
A43
A45
A47
A49
A51
A27
A29
A31
A33
A35
A63
A65
A67
A69
A71
A73
A75
A77
A53
A55
A57
A59
A61
B1
B3
B5
A79
B7
FURNITURE
IP6 bench
Serralves line
Degrau bench
Rua line
Axis line
Daciano da Costa line
Sueste line
Cais line
Balarés line
Mateo line
Tango line
Lótus line
Arc line
Arqui line
Urbus paper bin
Tom paper bin
Sac paper bin
Urbus drinking fountain
Linea drinking fountain
Parque line
LIGHTING
17º lighting pole
Solar pole
+ line
Comendador line
Alta bench
Matriz bench
Waste Separation Bins
Beburb drinking Fountain
Ufo line
Embondeiro line
Elegance bench
Filipe Alarcãobench
Inca bench
Promontório line
Point paper bin
Sheet paper bin
Bussaco line
Miguel Arruda line
Axis bold line
Interior Line
Alta lighting pole
Sloop paper bin
Ária bench
Gemini pole
C11
C13
C15
C17
C1
C3
C5
C7
C9
D11
D1
D3
D5
D7
D9
D13
E1
E3
E5
F1
E7
F3
F5
F7
F9
SIGNAGE SHELTERS
Larus Pole
Quadris | Rondo Line
Mupis
Arqui
Daciano da Costa
Pórtico
ACESSORIES
Grates
Fradinhos
Bollards
Vesúvio bollards
skips | dumpstersfor canine dejections
Parking
Shade structures
Sombra pergola
Burb bollards
Check-Up Track
Mondrian
Arqui
Jardim
Beach support
Watchtower
Kiosques Terrasses
KIOSKS
Mini Totem
Ardina Stand
Polis
www.larus.pt | +351 234 520 600A 1
“A sense of collection between different pieces, through a constructive concept: a common structural element evocative of a precise conceptual universe, that sup-ports each functional performance. Neutral, humble and discreet, with objects that do not contaminate space, to the extent that public space is not built on furniture, which must be contained and have the capacity to not erase all else surrounding it.”João Nunes
+ linedesign João Nunes
Furniture
A 2
200
3000 1200
800
700
120 80
560
2000
1000
420
300 920
1200
450 600
1200|1500
1200|1500
5020
36001010
400820
800
200
300 300
100
980
500
800
720
80
Stainless steel
Steel
Liquid painting
BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays. Rods to support wood sleds in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Paper bin Support: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Bucket: in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1).Inner ring to fix the plastic bag: stainless steel AISI 304 (LR AX1).Anchorage: anchored directly to foundation (LR F3).
Drinking FountainBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Tube and handgrip: stainless steel AISI 304 (LR AX1).Anchorage: anchored directly to foundation.The foundation can be a solid base or a prefabricated base to receive the water (LR F3).
BollardBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: anchored directly to foundation (LR F3).
Tree GrateBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: anchored directly to foundation (LR F3).
Foundations to be executed by the client according to the technical information available upon request.
Varnish
Cast iron
Wood
Other colors may be delivered on request
Metallization
Institutional Signage
paper bin drinking fountain bollard fixed _ retractable _ rebuttable
bench
Urban Signage
benchParking
Guide rail for pedestrian walkways Tree Grates
detail
www.larus.pt | +351 234 520 600A 3Furniture
The bench “Elegance” is supposed to refresh timeless lines of street furniture with a contemporary and elegant approach. The very robust structure, clean design and its superior comfort makes this product family a universal solution for the highest demands.
Elegance benchdesign Pedro Martins Pereira
A 4
30001500600630
806
427
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Foundations to be carried out by the client according to technical information made available
Metallization
Varnish
Liquid painting
Wood
Cast iron
www.larus.pt | +351 234 520 600A 5Furniture
Line made of cork and concrete, wherein the raw material plays a major role.Cork, being mixed with concrete as an integral material, transmits feeling of comfort, reducing the coldness oftenly associated with concrete.
Miguel Arruda linedesign Miguel Arruda
A 6
565600
425460
Ø300 Ø300
BenchConcrete & cork;
Fixing: anchored directly to the pavement.
Foundations to be carried out by the client according to technical information made available
460 bench - A option 460 bench - B option 600 bench - A option 600 bench - B option
Concrete & cork mix
www.larus.pt | +351 234 520 600A 7Furniture
Line composed of indoor banks and table that may be adapted to the outside. The differentiation of this equipment is the contrast between the conventional solution of seats and table in wood and the use of feet with contemporary design.
Contraste linedesign Larus | Francisco Providência
A 8
3000 850
600
3000
440
Table
Table & benches
Steel
Liquid painting
Varnish
Wood
Metallization
TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Top: Beech wood, treated by immersion, with pervasive all’acqua varnish.
BenchS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Seat: Beech wood, treated by immersion, with pervasive all’acqua varnish.
www.larus.pt | +351 234 520 600A 9Furniture
Bussaco’s Forest Foundation challenged Larus to develop a furniture line to reuse damaged species struck by a storm, with nefarious effects on natural and built heritage, in order to perpetuate their life cycle. The acquisition of elements from this furniture line contributes to the reforestation and preservation of the Bussaco National Forest, the only Portuguese forest with PEFC.
Simple and minimal lines underline rurality. As the solid wood is used natural without any varnish, the time passage effect emphasizes its identity, without diminishing its elegance and durability.
The combination with metal adds a classy touch to this rustic line, while increasing its physical consistency and minimizing the need of future maintenance.
Bussaco Linedesign Pedro Martins Pereira
A 10
430
2000 590
830 760
735
450
600
1200
950
Ø315
570 1900
1200
745440
770
700
7501000
1580
695
1440900
1000400
2000
950 700
1750940
1700 655
820
820
Steel
Liquid painting
Varnish
Solid wood
Metallization
Corten steel
Other colors may be delivered on request
Cast iron
Benches set - “Couch” and TableBench
Paper bins Bicycle rack
Four people table and benches set Barbeque
Signage and reading table
Drinking Fountain
BenchStructure: Steel plate S275JR (LR A1), blasted, metalized and painted.Solid wood (cupressus lusitanica / sequoia sempervirens).Anchorage: anchored directly to the pavement (LR F3).
Benches set - “Couch” and tableStructure: Steel plate S275JR (LR A1), blasted, metalized and painted.Solid wood (cupressus lusitanica / sequoia sempervirens).Anchorage: anchored directly to the pavement (LR F3).
Paper Bin Solid wood Bucket & lid: Steel plate S275JR (LR A1), blasted, metalized and painted.Capacity: 35 Lts (optional lid) & 120Lts (with lid).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).120L paper bin with lid: removable bucket. Reference-coloured waste separation steel plate available.
BarbequeStructure: Corten steel Top: solid woodBarbeque and protection top plates: corten steelAnchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
www.larus.pt | +351 234 520 600A 11Furniture
Made out of one single material, steel, this bench is a very neutral element fitted for almost every kind of public environments. Filipe Alarcão, wanted to create a very simple, conceptually speaking, and easy to produce piece, capable to discretely merge into our overload urban places.The IP bench’s shape evokes an extruded tube from which its large part of the bottom was removed maintaining its formal integrity on both tops.The two feet on both extremities are welded together to a single horizontal element conformed to work as a structural beam. The solution allows to achieve a very slim and light shape and yet a very resistant one, with long unsupported arches.
It is produced in to sizes with slight proportion differences, one for outdoors and a smaller one for indoor public spaces. There are two kinds of surface finishing available, a lacquered coating for indoor and a neutral varnishing overlay on the metalized grey body for outdoors which emphasizes its street furniture character.
Filipe Alarcão benchdesign Filipe Alarcão
A 12
2400
450 430
1800
550 450
RAL 9003
RAL 7024
RAL 7040
RAL 3009
RAL 5015
2400
2150
1800
1800
1800
430637
681560
Outdoor bench S275JR (LR A1) steel plate, metallized, painted and neutral varnishing.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Indoor benchS275JR (LR A1) steel plate, metallized and lacquered coating.
Indoor benchOutdoor bench
RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.
Other colors may be delivered on request.
Steel
Liquid painting
Varnish
Other colors may be delivered on request
Metallization
www.larus.pt | +351 234 520 600A 13
IP6 benchdesign Jesús Irisarri | Piñera
“The design comes from territories outside the concept of furniture. The idea is to de-sign a mechanism that generates a meeting space, a central point to be in group. Rather than proposing a particular use, it opens up a range of possible uses, different ways of being, bound and generated from the rela-tionships established between users. Thus, the way to sit, rest or lie down will depend on the number and disposal of the group of people that converge to the equipment.”Jesús Irisarri
Furniture
A 14
2580
1940
730
RAL 5003
RAL 5017
RAL 6029
RAL 6024
RAL 1021
RAL 1016
RAL 3000
RAL 7013
RAL 9001
RAL 9004
Water drainage for outdoor benches
upper side of the bench
stainless steel part
stainless steel tubewater drainage Ø16x1,5mm
lower side of the bench
BenchRotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1).Possibility to drain rain water with an accessory in stainless steel AISI 304 (LR AX1)Inner Lighting: (optional)White Bench: luminaire IP65 equipped with fluorescent lamp 18W T8 type.Other colors: luminaire IP65 equipped with fluorescent lamps 2x18W T8 type.Weight: 90 kg.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).Foundations to be executed by the client according to the technical information available upon request.
RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.
Other colors may be delivered on request.
Grinded stainless steel
Lighting
Rotomolded plastic
www.larus.pt | +351 234 520 600A 15
Serralves linedesign Álvaro Siza
“The classic urban furniture from the eighteen hundreds serves as a base to the ergonomic and maintenance study.”Álvaro Siza
Furniture
A 16
505
950
410
80
150
1400 | 1800
770
416
815
1800
1800
1494
opening system
optional ashtray
Paper bin
BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays, or enameled. Standard version in RAL 7042 (LR RA5).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Paper Bin 70LSteel bars S275JR (LR A1), metalized and painted. Standard version in forge enamel (LR EF1).Inner bucket: black rotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1).Access door with a triangular key lock.Ashtray (optional): tilting in stainless steel AISI 304 (LR AX1). Anchorage: anchor previously fixed to the foundation (LR F2).
Foundations to be executed by the client according to the technical information available upon request.Grinded stainless
steel
Steel
Liquid painting
Rotomolded plastic
Cast iron
Varnish
Wood
Metallization
Other colors may be delivered on request
Bench with backrest
Bench with backrest doble
www.larus.pt | +351 234 520 600A 17
“Streets, squares and public gardens should be a big living room, comfortably furnished. The urban furniture should be stable, firm, oriented, resistant to vandalism, reparable and adaptable to its users. Preferably, it should not retain rain water, being able to dry fast. In addition, it should not have a superfluous exposure in order to respect the surrounding. A simple design could be the correct answer, with a neat and vigorous design suscep-tible of further adaptations, using different acces¬sories, to other situations without ever losing its identity.”J. M. Carvalho Araújo
Rua linedesign J.M.Carvalho Araújo
Furniture
A 18
420
420
1800
420
105
900
420
420
Single simple bench
Triple simple bench
Bicycle rack
Option: curved
Option: curved
Option: drilled
Paper bin
Steel
Metallization
BenchSteel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Paper Bin Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Capacity: 30 Lts.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Bicycle Racks Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Foundations to be executed by the client according to the technical information available upon request.
www.larus.pt | +351 234 520 600A 19
The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:1997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.
Axis linedesign Pedro Martins Pereira | Larus
Furniture
A 20
700
500 | 1800 | 2500 | 3000
445
680
1800
710
700
500|1000
528
445
1800 | 2500 | 3000 500 652 1385
445
120
1165
575
1800
830
200445
940
600
830
652
300
Bench without backrest
Chair
Table
Bench with backrest | doble
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
TableBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper Bin Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 11L.Fixings: fixed directly to the ground by lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available
Paper Bin
Bench with backrest wall Mounting
Long Bench
Liquid painting
Cast iron
Varnish
Wood
Metallization
www.larus.pt | +351 234 520 600A 21
The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:19997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.
Axis linedesign Pedro Martins Pereira | Larus
Furniture
A 22
762445
1490
608
667
1490
500|1800|2500|3000 1800|2500|3000
500|1800|2500|3000
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Foundations to be carried out by the client according to technical information made available
Liquid painting
Cast iron
Varnish
Wood
Metalized
Bench with backrest Bench with backrest | doble
Bench without backrest
www.larus.pt | +351 234 520 600A 23
Using elements that recur in the shapes of the pieces, that for decades made Alba Fac-tories a recognized name, Daciano da Costa designed this urban furniture line, named after the founder of this company, Augus-to Martins Pereira, one of the anonymous artists who designed the cultural identity with which we identify ourselves. Benches, public lighting, fire hydrants and pieces that he de-signed for his home, such as banisters, lamp holders, doors and trims, repeating vertical and horizontal lines, were the references for the “Comendador Line”.
Comendador linedesign Daciano da Costa
Furniture
A 24
1000
330
3300
1800
700
Ø400
805
605
200
520
520200
signage
bench with backrest
drinking fountain
BenchLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Drinking fountainBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Spout and timer: chrome plated brass. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
SignageTop and base (post): BS EN 1561:1997 cast iron, (LRFF1), stripped, metallized and painted. Standard version in forge enamel (LR EF1).Post: anodized aluminium, profile C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3).Plates: OL.838059.1 (AP1 LR) aluminium, RAL 3004 (LR RA1) lacquered.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Metallization
Liquid painting
Varnish
Aluminium
Anodized aluminium
Cast iron
Wood
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 25
Urban furniture project which takes the graphical matrix as a geometrical rule, thus enabling it to be adaptable to the design of the floor where the equipment is being installed.
Matriz benchdesign Daciano da Costa
Furniture
A 26
1500
85
95
610
35
695
10Ø32
90
355 425
BenchLegs: S275JR (LR A1) steel tube and bar, metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Steel
Liquid painting
Varnish
Wood
Metallization
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 27
“The exaggeration, the modular clarity and the predominance of a volumetric and orthogonal expression, was designed as a counterpoint to the elegance of the delicate curved shapes, giving the piece an undenia-ble contemporaneity.”Daciano da Costa
Alta benchdesign Daciano da Costa
Furniture
A 28
70
90 1420
90
720
1600 485
430
BenchLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Steel
Liquid painting
Cast iron
Varnish
Wood
Metalized
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 29
“Family of objects with a basis of reference: the whitewashed wall, which can be seen as an “extension” to the urban and rural landscape. A reflection of the artistic quality of vernacular architecture, converging the needs of use and enjoyment.”Daciano da Costa
Sueste linedesign Daciano da Costa
Furniture
A 30
1800
420
600
1800 | 1200 | 600
770 450
600
470
600
850
700380
900
254
1095
1011
1800
440
Bench without backrest
Bench with backrest
Planter Drinking FountainFountain
Bench with backrest - concreteBetão C30/37 XC4 (LR B1) de cimento branco.
Bench without backrest - concreteBetão C30/37 XC4 (LR B1) de cimento branco.
Bench without backrest - concrete and woodWhite C30/37 XC4 (LR B1) cement concrete Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted.
Drinking fountainBody: white C30/37 XC4 (LR B1) cement concrete.Spout: triggered by a delayed tap in chrome plated brass. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).
Fountain Body: white C30/37 XC4 (LR B1) cement concrete.Source: Painted galvanized steel.
Planter (Option A)In white C30/37 XC4 (LR B1) cement concrete.Vase: S 355 J2 G2W (LR AC1) Corten steel-A. Planter (Option B)Vase: S 355 J2 G2W (LR AC1) Corten steel-A
Foundations to be carried out by the client according to technical information made available.
Bench without backrest with wood
Steel
Concrete
Liquid painting
Corten steel
Lighting
Varnish
Wood
Metallized
www.larus.pt | +351 234 520 600A 31
References were the historical components, of an austere design, of the city and work of Jorge Vieira (1926-1998), “a sculptor of popular Mediterranean expression, figurative-abstractionist, who violently deconstructed the human figure”, to quote the words of Prof. Daciano, who has named this a “design of citation”, because of the recurrence of materials and technical solutions used by his friend: the corten steel and the pieces supported by T-shapes, thus suggesting the three support points.
Daciano da Costa linedesign Daciano da Costa
Furniture
A 32
1820
470
570
3630
770
470
570
1820
770
570
465
1500 460
462
800
313
Bench with backrest BN1
Double bench BN1+BN2
Bench without backrest BN5Paper bin PL2
Bench without backrest BN2
BN1S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
BN2S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
BN5S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood (cleaver), treated by immersion, with pervasive all’aqua 420 (LR I1) for better absoption of the all’aqua 120 (LR V1) varnish with butyl diglicol Xi R36, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper Bin PL2S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Capacidad: 62 Lts.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
S 355 J2 G2W (LR AC1) corten steel and Tabebuia [aka Ipê or Trumpet Tree] wood solution is only being used in the city of Beja.
Steel
Liquid painting
Corten steel
Varnish
Wood
Metalized
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 33
“When the open space is public, built ele-ments and materials must be durable, robust and if possible beautiful. They’re expected to be used by people of all ages, from many cultures and with different habits. They must resist rain, heat, wind and time. They should remain in the publics´ emotional memory as beautiful and comfortable objects. Designing urban equipment is a challenge, like a puzzle that is built in slow-motion, throughout life.”Cristina Castel-Branco
Inca benchdesign Cristina Castel-Branco
Furniture
A 34
3390
360
860
3390
360
760
360
860
5640
6790
1140
2460
960
BancoMódulo: Betão C30/37 XC4 (LR B1) pintado. Assento: madeira Tali, tratadas com verniz aquoso, acrílico, microporoso máx. 20g/l COV com absorventes raios U.V’s (LR V1) ou Betão C30/37 XC4 (LR B1) pintado.
Simple bench with backrest
Simple bench without backrest
Double bench with backrest
Triple bench with backrest
Articulated Inca becnh
Module for Inca bench construction
Concrete
Liquid painting
Varnish
Metallization
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 35
Benches which easily adapt to uneven grounds, allowing younger users to have a fun time.
Degrau bench design Inês Lobo
Furniture
A 36
750
LT
1500
500
250
1500
BenchWhite C30/37 XC4 (LR B1) cement concrete.
Concrete
www.larus.pt | +351 234 520 600A 37
When thinking of the pier [Cais], one is reminded of sheltered vessels, of forgotten, entwined or stressed cables moored to cast iron bollards, that resist the corrosion of the maritime environment with a enduring stubbornness.
The Cais Line takes inspiration from these elements; in the enjoyment of seaside pro-menades.
Cais linedesign Pedro Martins Pereira
Furniture
A 38
320
850
320
850
335
905
460
400
590
445
425
526
420 420
400 445
300 300445
900
Ø140 Ø240
240
Ø240
500
200
500
Ø120
284
865
280
284
DC90 DC50A_RDC50 DC24 DC50A
DC50_R
Drinking fountain
Paper binBench without backrestBench with backrest
Bench with backrestBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).
Bench without backrestBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Drinking FountainBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
BollardsBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Paper binBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Container: AISI 316 (LR AX2) steel plateTriangular lock in AISI 316 (LR AX2) stainless steelCapacity: 42 Lts Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
bollard
Cast iron
Liquid painting
Steel
Metalized
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 39
Furniture line with bench, table and barbecue in reinforced concrete (HA-30-B-12-lla) and steel.
Balarés linedesign Vier Arquitectos
Furniture
A 40
1800 | 2400
440
550
2401560 600 550
740440
2401560 600
770 475
570300
1000760
2401560 600
770440
2401560 600
770475
2401560 600
475
1400120
800
9001150
700
600120
2400 750
750
Bench without backrest
Bench with metal backrest
Paper bin Perforation options available
Table and benches setTable
Barbecue
Boollard
Concrete
Galvanized
Steel
Corten steel
Bench without backrestC30/37 XC4 (LR B1) Concrete.
Bench with metal backrestC30/37 XC4 (LR B1) Concrete.Back: galvanized S275JR (LR A1) steel plate.
Bench with wood backrest and wood seatC30/37 XC4 (LR B1) Concrete.Backrest and seat: Steel plate structure S275JR (LR A1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.
Bench without backrest with wood seatC30/37 XC4 (LR B1) Concrete.Seat: Steel plate structure S275JR (LR A1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.
Paper bin 100LBody: galvanized S275JR (LR A1) steel plate. Option: perforated.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
BollardC30/37 XC4 (LR B1) Concrete. TableC30/37 XC4 (LR B1) Concrete.
BarbecueSupport: C30/37 XC4 (LR B1) concrete.Body: galvanized S275JR (LR A1) steel plate.
Foundations to be carried out by the client according to technical information made available.
Bench with wood backrest and wood seat Bench without backrest with wood seat
Bench with wood backrest and partial wood seat Bench with wood backrest
www.larus.pt | +351 234 520 600A 41
Line with movable seating, allowing for grou-ping of the equipment in accordance with the desires of its users, which is in line with the transformation and modernization of the urban space.Equipment that allows for a new playful use whilst at the same time having a simplicity that respects the environment.
Mateo Linedesign Josep Lluís Mateo
Furniture
A 42
900
610
2160
900
350
500750
Fixed | movable chair
Sliding Rail
bench with backrest Paper bin 45 L
Movable chairStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment, with a double carriage rolling system, allowing for movement of the seat along the rail.
Fixed chairStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Miradouro benchStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) single steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back legs with cast stainless steel (LR AF1) attachment.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper binBin bucket: made of AISI 316 (LR AX2) stainless steel plate, brushed on the upper side, perforated with loosely spaced circular holes, with a non perforated band around the top and bottom perimeter of the bin. Bottom of the bin formed by a AISI 316 (LR AX2) stainless steel plate Foot: AISI 316 (LR AX2) steel tube and bar, with a brushed finish. Base: made of AISI 316 (LR AX2) stainless steel plate, with a brushed finish.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Sliding RailIn S752JR (LR A1) stainless steel plate, stripped, metallized and painted.
Foundations to be carried out by the client according to technical information made available.
Stainless steel
Steel
www.larus.pt | +351 234 520 600A 43
The configuration of a woman’s back, when held by her partner’s arm, was the idea that went into the design of the Tango bench - this idea being pursued throughout the other elements of this line.
Tango linedesign Pedro Martins Pereira | Larus
Furniture
A 44
435
600
444
515
882
300
478780
340
280
480
1350
1800 | 2600
760
735
900
900
1800 | 2600
2600
435
700
380
586
380596770
1800 | 2600
Bench with backrest
Table
Chair without | with backrest
Paper bin
door
container
Bench with backrestS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper bin S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Capacity: 38 LtsFixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Chair without backrest | with backrestS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Bench with backrest with armrest
Bench without backrest - 4 wood sleds Bench without backrest - 6 wood sleds
Steel
Liquid painting
Varnish
Wood
Metalized
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 45Furniture
The concept is inspired by the early nineteenth century street furniture and in the first attempts of standardization.
We associate this period to a great generosity in the size and robustness of the parts, in addition to a concern with comfort. It is also associated with a certain idea of “romance” of the lamp and the bench, which was later recovered by the “operative nostalgia” of architects like Lewerentz, Perret, Portaluppi, Pouillon or Tessenow.
With the concern to answer to situations in which the relations of history strongly mark the place, Promontory Line subtly seeks to stylize this association between the form-type and its imaginary place.
Promontório furniture linedesign Promontório
A 46
1800
772
930
420600
400
3450
3000
450
250
1115
variável
3540
BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays, or enameled. Standard version in RAL 7042 (LR RA5).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Lighting poleTube: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Light bulb: frosted glassIRC > 80.Impact resistance: IK08.Resistance to liquids and dust intrusion: IP55 Light bulb: 100W metal iodidesTemperature: 2800K. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Cast iron
Metallization
Varnish
Wood
Other colors may be delivered on request
Lighting
Electrical installation
www.larus.pt | +351 234 520 600A 47
Minimalistic conception which is supported by two-dimensional shapes, reinforcing a robust presence.Its formal simplicity facilitates integration into a diversity of environments.
Lótus linedesign ImaginarQ
Furniture
A 48
820
1000
590
290
550
2100600
475
12682000 | 600
910
840
450
600 | 2000
2000
1800
510 450
450
1000
940
745
Double bench with backrest Bench with backrest Planter
Bench without backrest Paper bin
Bicycle rack
Table
Bench without backrest
Bench with backrest | doubleS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper bin Body: S275JR sheet steel (LR A1), stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Inner ring: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Bicycle rackS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
PlanterS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.
Foundations to be carried out by the client according to technical information made available.
Steel
Metallization
Varnish
Liquid painting
Other colors may be delivered on request
Wood
www.larus.pt | +351 234 520 600A 49
Formal simplicity that does not hide the con-trast between its support legs, giving a more intense presence, a subtle seat which results in an easily integrated piece of equipment.
Arc linedesign Pedro Martins Pereira | Larus
Furniture
A 50
1720
450
460
2120
655
760
Bench Table
BenchS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2)
TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Steel
Metallization
Varnish
Wood
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 51
A line for modern architectural solutions, with a predominance of high-quality dense mate-rials, which do not peel off the ground.
Arqui linedesign Jorge Trindade | Larus
Furniture
A 52
1900
500
4001100400 500
400
354
734
90
70
20
354478
796
A
Bench without backrest
ashtray
Paper bin Concrete paper bin
detail A
Bench without backrestGranite (LR G1) with BS EN 1561:1997 (LR FF1) cast iron seat, stripped, metallized and painted. Standard version in forge enamel (LR EF1).
Paper bin 35LBody: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper Bin (concrete)Body: C30/37 XC4 (LR B1) Concrete.Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Concrete
Cast iron
Granite
Metallization
Steel
Other colors may be delivered on request
Rotomolded plastic
www.larus.pt | +351 234 520 600A 53Furniture
The litter bin “Sheet” evokes the concept of a folded paper sheet, materialized by the bended edges of the front and rear metal plates.
It’s a lighter approach to waste and its simplicity intends to assure functionality.It expects to create a symbolic and emotional empathy against the disrelish people usually have towards waste containers.The garbage collection is done through an interior plastic bag fixed on an inner steel frame and is accessible through the door with rotational opening.With a capacity of 55L it is produced of metallised and painted steel plate.The installation is done by threaded bolts directly to the ground which enables an easy removal, if necessary.
Sheet paper bindesign Pedro Martins Pereira & Mário Oliveira
A 54
345525
840
1000
630 300408
Body: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in RAL 9016.Door: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in RAL 7035. Revolving door with safety lock. Waste collection made through plastic bag applied to metal rim inside.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Other colors may be delivered on request
Capacity: 55L Capacity: 100L
www.larus.pt | +351 234 520 600A 55Furniture
Sloop paper bindesign Larus
Recycle bin equipment, especially developed for easy access to inner containers (plastic bags). By operating the lock, the exterior body, cover included, goes up using gas spring, fully freeing access to containers. For the set’s closure, the body is pressed downwards and locked. There’s an easy identification for each type of waste, made by an inscription and reference color associated.Steel, stripped, metallized and painted.Capacity: 80+80L
A 56
Ø580
1185
Liquid painting
Metallization
Steel Fixed structure: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in forge enamel (LR EF1).Movable structure: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in forge enamel (LR EF1). AISI 304 (LR AX1) steel plate. Waste collection made through plastic bag applied to metal rim inside.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).
Foundations to be carried out by the client according to technical information made available.
www.larus.pt | +351 234 520 600A 57
An object which makes a statement with its formal and functional simplicity. Both sturdy and light.
Urbus paper bindesign Pedro Martins Pereira | Larus
Furniture
A 58
Ø370
660
90
855
Ø490
80 L 35 L
Paper binBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 32L | 80LFixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Stainless steel
Cast iron
Metallization
Other colors may be delivered on request
Rotomolded plastic
www.larus.pt | +351 234 520 600A 59
Lightness accentuated by the stem-like support attaching it to the ground, giving the idea of levitation.
Small, fun Paper bin.
Tom paper bindesign Pedro Martins Pereira | Larus
Furniture
A 60
500
85
300
300
Ø350
Ø200
RAL 5003
RAL 5017
RAL 6029
RAL 6024
RAL 1021
RAL 1016
RAL 3000
RAL 7013
RAL 9001
RAL 9004
Tom paper bin
Body: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Container: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1). Support: S275JR (LR A1) steel tube, metallized and painted. Standard version in RAL 7016 (LA RA6).Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.
RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.
Other colors may be delivered on request.
Compact soil (urban)Concrete foundationCapacity: 32 L
Liquid painting
Metallization
Steel
Other colors may be delivered on request
Rotomolded plastic
www.larus.pt | +351 234 520 600A 61
Lightness accentuated by the stem-like support attaching it to the ground, giving the idea of levitation.
Clean, neutral language, appropriate to diverse typologies.
Point paper bindesign Pedro Martins Pereira | Larus
Furniture
A 62
85
600
730
Ø350385
600
85
300
Ø350
300
Ø200
Ø200
600
85
Ø200
Ø350
Ø424
600
300
Ø350Ø200
817
120
Ø169
Ø104
40
Point paper bin
Body: BS EN 1561:1997 (LR FF1) standard, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Support: S275JR (LR A1) steel tube, metallized and painted. Lock: triangular key in AISI 316 (LR AX1) stainless steel. Paper bin with cover: BS EN 1561:1997 (LR FF1) standard, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).
Point paper bin with horizontal liddesign Larus, Carrilho da Graça
Compact soil (urban)Concrete foundationCapacity: 42 L
Point paper bin_attached to pole
Point paper binwith inclined lid
Liquid painting
Steel
Cast iron
Metallization
Other colors may be delivered on request
Rotomolded plastic
Point paper bin with horizontal lid and ashtraydesign Larus, Carrilho da Graça
Detail
closed open
www.larus.pt | +351 234 520 600A 63
Use of high-quality materials and minimal use of components.
Sac paper bindesign Pedro Martins Pereira | Larus
Furniture
A 64
490 900
Ø400
Ø317
Body: AISI 304 (LR AX1) steel plate. Inner ring: AISI 304 (LR AX1) stainless steel rod.Support and lid: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in RAL 7016 (LA RA6). Lock: triangular key in AISI 316 (LR AX1) stainless steel.Capacity: 30L.Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Cast iron
Metallization
Steel
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 65
Beach Eco Points, providing an effective adaptation to seaside locations, with good sized bins in appealing colours.
Waste Separation Binsdesign Larus
Furniture
A 66
Ø500
925
200
RAL 5003
RAL 5017
RAL 6029
RAL 6024
RAL 1021
RAL 1016
RAL 3000
RAL 7013
RAL 9001
RAL 9004
Body and lid: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin in blue, yellow, green and grey. Waste disposal through side opening. Connection between lid and main body through AISI 304 (LR AX1) stainless steel hinge, preventing the lid from being stolen.Vinyl sticker on the lid indicates type of waste.Support: S275JR (LR A1) galvanized steel tube.Inner container: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin for the placing of bin liners.Capacity: 105LFixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.
Other colors may be delivered on request.
Steel
Stainless steel
Galvanized steel
Other colors may be delivered on request
Rotomolded plastic
www.larus.pt | +351 234 520 600A 67
For use in public spaces, allowing all users to easily and effectively access the water irrespective of their mobility or physical condition. By flexing the spring, the water flow mechanism is activated allowing one to determine the direction of the water jet.
Beburb Drinking Fountaindesign Carlos Pereira
Furniture
A 68
B01 B02 B03
Sizeheight 1000mmdiameter 2000mm
B01Spout: AISI 304 (LR AX1) stainless steelBase: GraniteFixing: element fixed to the ground with lead solder (LR F3).
B02Spout: AISI 304 (LR AX1) stainless steelBase: AISI 304 (LR AX1) steel plateFixing: element fixed to the ground with lead solder (LR F3).
B03 (stainless steel grid)Spout: AISI 304 (LR AX1) stainless steelGrate: AISI 304 (LR AX1) stainless steelFixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Granite
Stainless steel
www.larus.pt | +351 234 520 600A 69
Elegant, conventional option.Gravi Version.
Urbus drinking fountaindesign Pedro Martins Pereira | Larus
Furniture
A 70
Urbus
Ø375 Ø375
903
Ø190Ø90
Gravi
Ø270
Ø14
15
400
Fixings and water connection
Cut-off tap with ½ inch screw ½ inch male connector Ø 6mm exterior1mm wall
Discharge hoseØ 23mm exterior3,5mm wall
Drilled base for fastening by screws
Bowl: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tube and base: AISI 316 (LR AX2) stainless steel stripped, metallized and painted. Spout and timer button: chrome plated brass.Gravi version: body made of conglomerated cement gravel, surface washed. Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Cast iron
Metallization
Steel
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 71
A choice of contemporary architecture in round or square versions.
Línea drinking fountaindesign Pedro Martins Pereira | Larus
Furniture
A 72
200
200
Ø230
900 900
Cubic lineRound line
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Spout and timer button: chrome plated brass.Options: Round (round) and Cubic (square) Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Cast iron
Metallization
Other colors may be delivered on request
www.larus.pt | +351 234 520 600A 73
Simple and functional line, easy to remove when transporting to a new location, due to the nature of its installation characteristics and adaptability to different scales.
Parque linedesign Pedro Martins Pereira | Larus
Furniture
A 74
200
450
750
LT
900
30
300
425
750
200
450
6501490
1000
LT
1840
Section to be placed underground
Backrest for bench
Table and benchesStructure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: The section to be placed underground (20cm) has been painted with three complementary antioxidant paints.There is no need to bolt the structure, allowing it to be moved to a new location.
It is also possible to have a 2 bench version, as the equipment can be attached by bushings or anchor bolts.
Liquid painting
Varnish
Metallization
Steel
Other colors may be delivered on request
Wood
www.larus.pt | +351 234 520 600A 75
Line consisting of bollard, cycle stand, ashtray and dog waste bin, formally exploring the linearity of the iron bar, as a characteri-zing element.
Ufo Linedesign Pedro Martins Pereira
Acessories
A 76
100
120
10001000
150
250
80
600
80
900
80
45
900
1800
450
430630
560
725860
235
400
bicycle rack
dog waste bins ashtray
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper BinS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 35L. Fixing: element fixed to the ground with lead solder (LR F3).
Bicycle rack Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Dog waste binsBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Bin and bag dispenser: AISI 304 (LR AX1) stainless steel, brushed. Fixing: element fixed to the ground with lead solder (LR F3).
AshtrayBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1) Containers: brushed AISI 304 (LR AX1) stainless steel.Fixing: element fixed to the ground with lead solder (LR F3).
Fixed bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).
Retractable bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).
Rebuttable bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available
bench with armrest
bench with backrest
bench without armrest and backrest
paper bin
fixed bollard bollard retractable bollard rebuttable
Liquid painting
Wood
Varnish
Metallization
Steel
Other colors may be delivered on request
Stainless steel
www.larus.pt | +351 234 520 600A 77
Angola. Savannah.The playful, grotesque and surprising physiognomy of the secular baobab tree, is distinguished within this lonely and warm wilderness.The historical and cultural reference intervened in the street furniture project, strengthening its local identity.The cast iron, a noble material, gives body to the trunk and the branches of the tree, which support the slats of the park benches. The timber used is autochthonous.The bollards, in cast iron for the same reason, suggest the trunk, but more elegant. They also served as support to the paper bin, of considerable dimensions, as is local practice, whose basket is produced in metalized and painted steel, galvanized steel or stainless steel.
Embondeiro Linedesign Pedro Martins Pereira
Furniture
A 78
1800/1300
1400/900
650
450 405
Ø400
800
480
1800
1400
817
648
450 405
120
800
85
Bench with backrest Bollard
Paper binBench without backrest
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
BollardsBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Paper BinLeg: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel.Capacity: 60L Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Wood
Cast iron
Metallization
Steel
Varnish
Liquid painting
www.larus.pt | +351 234 520 600A 79
Benches with a depurated language and a rational design.Standard cast iron sides, Euronorm 1561:1997, blasted, metallised and painted.Blasted metallised and painted sheet steel structure.Tali wood seating protected by U.V. varnish.Logo engraving option.
Ária Benchdesign Pedro Martins Pereira
A 80
1810
570
790 620 790
570
2040
895
700
BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
B 1www.larus.pt | +351 234 520 600
The inclined angle unites the compo-nents of this light: the vertical elevation of the pole and the horizontal projection arm. Inside the tube of the lamp, there is an almost vertical projection of light. The cut in the tube shows the intersection between the cylinder and the illumination cone. Maintenance is made easy, thanks to its upper access. The brief and easily recycled concept, inspires a quality of life reduced to essentials, to life in freedom.
17º lighting poledesign Francisco Providência
Lighting
B 2
5500500
17º
500
4530
65º
Ø114
150w 110
100
90
80
70
60
50
40
30
20
10
Lux1086420m28 6 410
0m
1
2
3
4
5
1400
Average luminance (70/150W)- With a 6m removal - 37/80Lux- With an 8m removal - 32/70Lux- With a 10m removal - 23/50Lux
maintenance
Photometric Plan3 poles150w Lamp10m SpacingTrack width of 5.5m
PoleTube: AISI 304 (LR AX1) stainless steel or S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1).Light bulb: 70/150W metal iodides, Colour. temperature: 2800K IRC > 80 Electronic ballast.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Stainless steel
Steel
Other colors may be delivered on request
Lighting
Electrical installation
17º LED ColumnPower: 35WColour temperature: 4000ºKLuminous flux: 2700 lm IRC: >80Possibility of regulating the luminous flux.
B 3www.larus.pt | +351 234 520 600
Lighting
Alta lighting pole design Daciano da Costa
The lighting pole for the linear park in the central axis of “Alta de Lisboa” was developed in order to relate to the immediate surroundings. It becomes the “speech” embodied in “thing”, starring or simply animating the paths. The use of an organic formal language led to a set of “plant” objects. The lighting pole is the most exemplary of them.
B 4
3550
3050
500
Ø400
150
0.00
8.00m
0.00 14.00 28.00m
10 20 30 40 lx
4.00m
Liquid painting
Metallization
Cast iron
Steel
Other colors may be delivered on request
Lighting
Electrical installation
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted; S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Alternative: Cast Aluminium body.Cut-off globe: Crystal polycarbonate; outer hood aluminum painted according to the structure. ULOR <1,5%IRC > 80.Impact resistance: IK10Liquids and dust intrusion resistance: IP55 Light bulb: 100W metal iodides. Colour temperature: 2800K. Fixing: element fixed to the ground with lead solder (LR F3).Foundations to be carried out by the client according to technical information made available.
Photometric Plan3 poles14m SpacingTrack width of 8m
B 5www.larus.pt | +351 234 520 600
Lighting of pedestrian zones, incorpora-ting technical components in the pole, allowing for a discreet presence.Solar solution with LED technology, en-suring higher energy efficiency and better quality of lighting, leading to greater safety with low maintenance costs.Environmentally friendly product.
Solar poledesign Francisco Providência
Lighting
B 6
1000
Ø1591000
5000120º
H
45º
11º
3500
H
3,5x H
17,5
12,5
7,5
15
10
5
Mounting height
(H)
Spacing
(H)
Coverage area
(H)
3m
3,5m
4m
4,5m
10,5m
12,25m
14m
15,75m
31,5m²
42,8m²
56m²
70,8m²
The low emissionabove the inclinationof 56º ensuresboth low levels ofglare and lightpollution.
Photometric Plan
12VDC/15Ah Gel batteries45W Photovoltaic panelLED Module:- Luminous Flux ~920lm- Power ~ 11.5W- Colour temperature 5300ºK (typical)- IRC > 70- High lighting uniformity- Compliance with EN13201-2 standard - IP66/IK08- 4 day autonomy (16h/day), in adverse weather conditions- Ideal spacing between columns: 3.5x mounting height (H)- Recommended mounting height: 3.5 to 4m- Coverage area of 3.5xHxH m2 (where “H” is the mounting height)
Tube: S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1)Lamp module and photovoltaic panel: rotomoulded plastic in DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Diffuser: High optical performance polycarbonate, with UV and static protection treatment.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Possibility of intelligent management:- optimized energy consumption in accordance with environmental lighting conditions (through flow regulation)- centralized and remote management,- Real time weather forecast (monitoring and management of infrastructure);
Liquid painting
Metallization
Rotomolded plastic
Steel
Other colors may be delivered on request
Solar lighting
B 7www.larus.pt | +351 234 520 600
Gemini Column and Pergoladesign Pedro Martins Pereira
Depurated language and rational design light column. Blasted metallised and painted sheet steel structure. Light with Led technology.Option of a 2 light points column(Gemini 6/4 8/4) or just 1(Gemini 6/8).
B 8
6000
88%
97º
78%
97º
88º
8000
88º
97º
945
78º
4000
450
97º
88º
78º
3982
2984
4984
4000
3450
LT240
32224000
LT2
Tube: steel S275JR (LR A1) blasted, metallised and painted. Standard version in forge enamel (LR EF1).
Lamp modulus:
Gemini 6m: Power: up to 35WColour temperature: 4000ºKLuminous flux: 3300lm @ 35WIRC: >80Possibility of regulating the luminous flux.
Gemini 6/4m: Branch at 6m:Power: 35WColour temperature: 4000ºKLuminous flux: 3300lm IRC: >80Possibility of regulating the luminous flux.
Branch at: 4m:Power: 18WColour temperature: 4000ºKLuminous flux: 2000lm IRC: >80
Possibility of regulating the luminous flux.
Gemini 8m: Power: 55WColour temperature: 4000ºKLuminous flux: 4500lm IRC: >80Possibility of regulating the luminous flux.
Gemini 8/4m: Branch at 8m:Power: 55WColour temperature: 4000ºKLuminous flux: 4500lm IRC: >80Possibility of regulating the luminous flux.Branch at 4m:Power: 18WColour temperature: 4000ºKLuminous flux: 2000lm IRC: >80Possibility of regulating the luminous flux.
Fixing: with threaded rods in stainless steel AISI 304 (LR AX1) anchored directly to the pavement/foundation with chemical plugs (LR F1).Easy to remove if necessary.
Foundations to be executed by the client according to the technical information available upon request.
www.larus.pt | +351 234 520 600C 1
ALIADOS GRATEDESIGN SIZA VIEIRA | SOUTO MOURA
SATURNO GRATEDESIGN ALCINO SOUTINHO
QUADRIS GRATEDESIGN PEDRO MARTINS PEREIRA
ALTA GRATEDESIGN NPK
CRIVA GRATEDESIGN NPK
GG GRATEDESIGN JORGE TRINDADE | LARUS
GP GRATEDESIGN JORGE TRINDADE | LARUS
Grates for tree ditches made of Euronorm cast iron 1561:1997, metalli-zed and painted.
Acessories
WIRL GRATEDESIGN SOUTO MOURA
ALIADOS SQUARE GRATEDESIGN SIZA VIEIRA | SOUTO MOURA
ROUND GRATEDESIGN LARUS
GRATE WITH METAL GUARDRAILDESIGN LARUS
TETRIS GRATEDESIGN LARUS
AGAL GRATEDESIGN LARUS
40AB
Ø2000Ø950
40
Ø500 Ø1200
18184
18184
1035
1035
Ø940 5
Ø940 5
45
Ø970Ø610
50
1200
400
1200
B
A
B
A
AB
B
A
AB
AB
A B
1035
esc.: 1/40 esc.: 1/10
Ground level grate
Raised grate
ALIADOS 2000 GRATEDESIGN SIZA VIEIRA | SOUTO MOURA
SATURNO GRATEDESIGN ALCINO SOUTINHO
QUADRIS GRATEDESIGN PEDRO MARTINS PEREIRA
ALIADOS 1200 GRATEDESIGN SIZA VIEIRA | SOUTO MOURA
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.
Raised grate with Rim
www.larus.pt | +351 234 520 600C 1
1500
45
690
1500
35
1200
1200
A B
A B
450
1200
1000
35
450
660
35
500
1240
400
630
40
A B
AB
AB
AB
AB
AB
A B
A B
GG2 1500 X 1500 GRATEDESIGN LARUS | JORGE TRINDADE
GG1 1200 X 1200 GRATEDESIGN LARUS | JORGE TRINDADE
GG 1200 X 1000 GRATEDESIGN LARUS | JORGE TRINDADE
GP GRATEDESIGN LARUS | JORGE TRINDADE
Acessories
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).
esc.: 1/40 esc.: 1/10
GRATE GG 630x400DESIGN LARUS
66 35 AB
1480Ø600
A B
B
AØ600 Ø1480
66 35
40
Ø600 1480
A B
40
Ø600 Ø1480
B
A
AB
AB
AB
ALTA Q GRATEDESIGN NPK
ALTA C GRATEDESIGN NPK
CRIVA Q GRATEDESIGN NPK
CRIVA C GRATEDESIGN NPK
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
esc.: 1/40 esc.: 1/10
www.larus.pt | +351 234 520 600C 1
1200
1200400 800
40
1000
1000300 700
40
1200
1200
40
Ø500
1000
1000
Ø500
40
990494
990Ø500
35
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
WIRL GRATEDESIGN SOUTO MOURA
ALIADOS SQUARE GRATEDESIGN SIZA VIEIRA | SOUTO MOURA
ROUND GRATEDESIGN LARUS
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.
1400
625
50
600
1530
1200
Ø1500
50
Ø800
1200|1500
1200|1500
50
1800|2000
1800|2000
50
GRELHA WITH METAL GUARDRAILDESIGN LARUS
TETRIS GRATEDESIGN LARUS
AGAL GRATEDESIGN LARUS
Body and rim: corten steel
Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.Guardrail: S275JR (LR A1) steel stripped, metallized and painted.
Body and rim: S275JR (LR A1) steel stripped, metallized and painted.
C 3www.larus.pt | +351 234 520 600
Spindle shaped bollards, with circular section, a consequence of the traditional limestone bollards historically called Fradi-nhos. Metal tubes may be used to unite the bollards so they may be used as guard rails.
Fradinhosdesign Daciano da Costa
Acessories
C 4
680
250
2570
360
LT LT20
c c
Fradinho FR3 Fradinho FR4
threaded tube
Fradinho FR3Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixing: element fixed to the ground with lead solder (LR F3).
Fradinho FR4Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Cast iron
Other colors may be delivered on request
C 5www.larus.pt | +351 234 520 600
Bollards used for various purposes.
Bollardsdesign Larus
Acessories
C 6
1200 900
76
P1 P2 P3 P4 P5
730
500
300
1000900
12589
Fixed bollard Rebuttable bollard Removable bollard Retractable bollard Lighted bollard
Retractable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).
Iluminated BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: fstandard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).White acrylic sheet 4mm, clear acrylic sheet 2mm. Lock: triangular - access to the circuit cut case 1469C. Light: dulux EL ECO E27 16W/21/840.Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Fixed bollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Fixing: element fixed to the ground with lead solder (LR F3).
Foldable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).
Removable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).
Liquid painting
Metallization
Steel
Cast iron
Other colors may be delivered on request
C 7www.larus.pt | +351 234 520 600
Acessories
Flexible urban barrier for the protection of pedestrian spaces. When hit by a car, flexes and absorbs the impact. Does not damage the sidewalk, the object or the vehicle. Cushions possible impacts sustained by pedestrians.
Burb bollards design Carlos Pereira
C 8
640
200
02 0301 02 0301
120011001000950900
800
700
600
500
400
300
200
100
100 200 300 400 500
100 450
1200
1000
800
600
400
200
0
05 0 100 150 200 250 300 350 400 450
Body: stainless steel 40mm nominal diameter steel cable vs 580mm length; one end has a cap; the other end has a torn tube with a flange intended for fixing to the ground.
01 fixed version02 removable version03 retractable version
Stainless steel
C 9www.larus.pt | +351 234 520 600
The Vesúvio bollards are intended to solve the problem of illicit invasion of public sidewalks by vehicles, without inflicting an overly excessive formal or physical aspect, the sloped surface facing the pedestrian and the more aggressive edge facing the road.
Vesúvio bollarddesign Alcino Soutinho
Acessories
C 10
166
338 262 347
245
340
Vesúvio 17 Vesúvio 25
Mounting System
Vesúvio 17Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).Fixing: element fixed to the ground with lead solder (LR F3).
Vesúvio 25Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).Fixing: element fixed to the ground with lead solder (LR F3).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Cast iron
Other colors may be delivered on request
C 11www.larus.pt | +351 234 520 600
Containers for disposing of dog waste. The round tube is not aggressive or hazardous to the public in general and colours may be customized. The movable top edge, holds the disposable bags and when lifted, allows access to the liner on the bottom of the container. When opening of the latch, the lid will fold thus allowing for maintenance.
Dog waste binsdesign Jorge Trindade
Acessories
C 12
220
Ø125
1070
Closed container open container
Bag removal
Telescopic opening
Cross section of lid
Roll of plastic bags
Dog waste binsBody: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in Aral Cin (LR RA7).Movable top: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in RAL 6018 (LR RA2). Incorporates disposable bags. When lifted, allows for access to the line on the bottom of the body of the bin. It is also from here that, upon opening of the latch, the lid folds, allowing maintenance.Guides, handle and inner ring: AISI 304 (LR AX1) stainless steel. Fixing: threaded rods of AISI 304 (LR AX1) stainless steel bolted to the ground using chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Stnailess steel
Other colors may be delivered on request
C 13www.larus.pt | +351 234 520 600
In the continuous model, each module cor-responds to a six meter hot-pressed bar.In the triangular model, the bikes are held by their frame.
Continuous parkingdesign Pedro Pereira
Triangular parkingdesign Francisco Providência
Acessories
C 14
364 637 910 1183
860
600
780 1140 1500
645
420
Triangular module
1 module1 seat
2 modules2 seats
3 modules3 seats
4 modules4 seats
Continuous parking
2 module4 seats
3 modules6 seats
4 modules8 seats
Continuous ParkingBody: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Lock mechanism: S275JR (LR A1) steel bar, stripped, metallized and painted and S275JR (LR A1) steel pipe, stripped, metallized and painted.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used.
Triangular ParkingBody: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used.
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Other colors may be delivered on request
1 module2 seats
C 15www.larus.pt | +351 234 520 600
By using the Prumo Larus concept, it is possible to hide the fixings, thus enabling a much purer finish. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing. The gussets that tighten the shade screens, are fixed to the plumb-bob by pipes which allow for height adjustment as well as com-pensating where the ground is uneven.
Shade structuresdesign Pedro Martins Pereira | Larus
Acessories
C 16
3500
3720
3720
3500
A-A
A AA
A
The plan dimensions may be changed.
Shade StructurePlumb bob: Anodized aluminium in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. The metallized and painted S275JR (LR A1) steel gussets tighten the perforated shade screens which, upon attachment to the plumb bob by S275JR (LR A1) steel tubes, allow for regulation of height, compensating for any unevenness in the ground. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Perforated shade screens
Metallization
Steel
Anodized aluminium
Other colors may be delivered on request
C 17www.larus.pt | +351 234 520 600
An adjustable solution, capable of adapting to different sceneries without becoming too overwhelming.
Shade pergoladesign Pedro Martins Pereira | Larus
Acessories
C 18
5000 4000 3000
3000
5000
2900
3000
3000
8800
Other dimensions
Shade PergolaStructure: Adjustable square plumb bob made of S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Nordic Pine wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Other coverage solutions on request.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Perforated shade screens
Varnish
Wood
Metallization
Steel
Anodized aluminium
Other colors may be delivered on request
D 1www.larus.pt | +351 234 520 600
The harmony of contrasts is present in the work of Mondrian, who said: “Squares! But I never drew squares”.
Mondrian Kiosksdesign Larus
Kiosks
D 2
2600
366
1210
2720
924
Structure: Panels with high-density compounds soaked in thermo-hardened HPL 3000x1350x14mm (LR RF1) phenolic resins, structured with vertical gussets and horizontal outlines of S275JR (LR A1) steel, metallized and painted. Cover: polyester resins reinforced with fibreglass. Base: metal structure in S275JR (LR A1) steel, metallized and painted. Floor: JomarDeck (LR CJ1) plywood coated with a phenolic film and slip resistant finishing.May be adapted to different uses.
Liquid painting
Fiberglass
Electrical installation
Metallization
Steel
Phenolic resin panels
Other colors may be delivered on request
D 3www.larus.pt | +351 234 520 600
Modular and easy to integrate into both historical or contemporary places, this confi-guration is adaptable to diverse locations.
Arqui Kiosksdesign Jorge Trindade | Larus
Kiosks
D 4
2060
3060 3060
2950
12840
11000
5000
5000
3500
8000
9000
9000
6000
2960
7890
6000
5000
5500
2500
2970
2970
Kiosks Arqui 3x2 Examples of other dimensions
Phenolic resin 756
Structure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in RAL 7011 (LR R2). Cover: polyester resin reinforced with fibreglass, with rainwater management system of piping inside the supports. Exterior coating: HPL or MEG Wood finish SEI-A 756 (LR RF1) phenolic resins.Interior coating: 30mm sandwich plate, smooth on one side and textured on the other. Drop ceiling: metal structure in S275JR (LR A1) steel with metallized sandwich plate sheets. Ventilation grids: thermo-lacquered aluminum.Possibility of including tempered glass panels, access doors, service windows, opening panels, WCs and other types of finishing.
Liquid painting
Fiberglass
Electrical installation
Metallization
Steel
Phenolic resin panels
Aluminium
Tempered glass
Other colors may be delivered on request
D 5www.larus.pt | +351 234 520 600
Traditional and romantic, easy to integrate into large natural spaces, plazas, parks or public gardens.
Jardim kiosksdesign Larus
Kiosks
D 6
38803300
2160
3560
21603560
2400
930
3500
Jardim 6 Jardim 9
Jardim 11 Jardim 13 Jardim 17
Jardim 25 Jardim 4.5x2.5 Jardim 6x3
3317
2500
2700
3742 2992 5310
3750
45007750
26802500
5200
RAL 7011
RAL 9110
RAL 6005
RAL 3005
Jardim Kiosk 4
Other dimensions
Structure: thermo-lacquered aluminium. Cover: polyester resin reinforced with fibreglass, with with external gutter for rainwater management.Panels: polyester resin reinforced with fibreglass. Protection via opaque panels that open; panels in electro-sold and metallized wire netting or aluminium blinds may also be used. May be adapted to any purpose. The numerical designation corresponds to the inner area.
RAL colors available
Liquid painting
Fiberglass
Electrical installation
Metallization
Steel
Aluminium
Tempered glass
D 7www.larus.pt | +351 234 520 600
Beach supportdesign Alcino Soutinho
Modular construction, easily and quickly dis-mantled, in places often pounded by the sea during Winter. Allows for complete rainwater drainage.
Kiosks
D 8
2613
3830
3702300
Modular construction: marine plywood coated on both sides with polyester resin reinforced with fibreglass. Connecting parts: AISI 304 (LR AX1) stainless steel.The basic version has modules for customer care; kitchen, first aid facility, storage and WC (Male, Female and / Handicapped).Multiple modules may be joined together. Solution for rainwater drainage through the joining rails of the module.Intended for placement at locations often pounded by the sea during Winter, hence its easy-to-dismantle nature.
Fiberglass
Stainless steel
Marine plywood
Modular
D 9www.larus.pt | +351 234 520 600
Hardware for beachwatch support.This hardware draws visible reference from the wooden decking slats and solar protection awnings of boats.Modular construction, easy to dismantle, using corrosion-resistant materials.
Lifeguard towersdesign ESAD
Kiosks
D 10
11000
2860
700
11000
2860
700
Modular construction: easy to dismantle with a metal structure in S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tube section profile: AISI 316 (LR AX2) stainless steel enhancing resistance to corrosion.Treatment for plating based on epoxide resins hardened with polyamide resins and pigmented with zinc dust. Painting: Anticorrosive enamel. Interior paving: Anti-slip maritime plywood. Outdoor paving: 100% recyclable composite deck.Walls, ceilings and doors: OSB plates reinforced with layers of polyester resin reinforced with fibreglass. Metal hardware and locks: AISI 316 (LR AX2) stainless steel.Fixed windows: steel profiles in grey lacquer with tempered glass.Shade structure: micro-perforated screen and AISI 316 (LR AX2) stainless steel frame. Mast for placing of banner: AISI 316 (LR AX2) stainless steel.Electrical installation: solar panel providing energy independence to the watchtower. Side wings: slats of Kambala wood, lacquered in the colour RAL 9003 (LR RA3).Protection: Rope.Fixing: Wooden beam foundation previously fixed to the structure (LR F5).
Liquid painting
Fiberglass
Electrical installation
Electrical installation
Solar lighting
Metallization
Steel
Stainless steel
Modular
Varnish
Wood
Aluminium
Tempered glass
Other colors may be delivered on request
D 11www.larus.pt | +351 234 520 600
Kiosks
Equipment for selling and exhibit newspapers and magazines. Very compact when closed. When open, side doors and front panel with shelves and racks. Indexed mupis, for the posterior surface, maximizing the equipment or promoting presence.
Ardina Kioskdesign Larus
D 12
1175
22602700
3845
835
2700
1175
1385
Liquid painting
Electrical installation
Steel
Varnish
Wood
Aluminium
Other colors may be delivered on request
Ardina kiosk 2 mupis [2,65 m2]Ardina kiosk 3 mupis [3,70 m2]
Structure: mild steel with leveling feet. Surface finish in anticorrosion gray enamel or other color set by the client. Floor: structure embeded wooden floor, linoleum coated. Coverage: polyester resin reinforced fiberglass. Panels: aluminum frame and polyester resin fiberglass reinforced. Opening side door: aluminum frame and polyester resin fiberglass reinforced. Foldable / hinged door: stainless steel shelves. Inner shelves in zinc painted sheet. Mupis: 1 illuminated face display; thermo aluminum frame with bended Zincor plate structure; tempered glass face.
D 13www.larus.pt | +351 234 520 600
Kiosks are the solution for many small business investors. They are sales points that have reduced installation costs. Terrace bars allow us to enjoy the urban environment while providing protection from weather conditions This type of hardware, often with a privileged location, gives life to open spa-ces, meeting the demands of integration into historic, rural or contemporary areas. We have resorted to the use of resistant materials so as to avoid maintenance costs or the degradation of hardware.
OTHER KIOSKSOUTDOOR TERRACE BARSdesign Larus | Mário Vaz | Mattos David |Jorge Trindade | João Matos
Kiosks
D 14
SIMPLES4,49m²GRANDE7,56m²
PARQUE5,47m²
OCTUS3,8m²
SANDWISH BAR OCTUS3,35m²
LISBOA2,92m²
UNIVERSAL2,83m²
TUBOS4,84m²
VERSÁTIL2,96m²
TERRACE BARSTERRACE BARS
D 15www.larus.pt | +351 234 520 600
VISUAL16m²
PIRÂMIDE3,84m²
AVEIRO2,83m²
BANCA ARDINA3,7m²
BANCA ENGRAXADORES2,12m²
BOTAS2,31m²
TATAMI
PÉRGOLA
Kiosks
D 16
Kiosque URBUS5m²
EXPO12m²
CUBOS FORTE4,84m²
ARQUI5m²
D 17www.larus.pt | +351 234 520 600
The project, intended to respect the surroun-ding area of the old XVII century military de-fence building, was built using copper sheet for the cover and on some of the facades.Slate in the interior paving; sliding doors.
Beach Terrace Bar | Vila do Condedesign Paula João
Design concept that contrasts with the historic architecture and romantic garden surroundings, hence also the external cla-dding in alucobond.
Urban Terrace Bar | Guardadesign Joaquim Carreira
Kiosks
D 18
Containerized cafeteria / bar serving as sup-port to the river-tour pier of Entre-os-Rios.
Terrace Bar | Entre-os-Riosdesign Paula João
Resulting from the transformation and modernization of a degraded historic centre. An ambitious project was undertaken for the pedestrianization and removal of road traffic. The redesigning of the park led to it being occupied by several public facilities, allowing for new commercial and recreational uses, respecting the older building structures and introducing an impressive new structure, large in size but nevertheless gracious, thus conferring a modern look to the older styles.
Terrace Bar | Castelo Brancodesign Josep Lluís Mateo
On the coastal slope of Almada, facing the city of Lisbon, a terrace bar was built, allo-wing for the enjoyment of the Tagus river and the capital city views.Using copper sheets around the ledges.
Terrace Bar | Almadadesign Larus
E 1www.larus.pt | +351 234 520 600
Structural Post, with a discreet presence, which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing.
Larus poledesign Pedro Martins Pereira | Larus
Signage
E 2
Ø107
Fitting system
Post base
Post top end
Post: Anodized aluminium structure in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. With a discreet presence which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).Signposts: In lacquered aluminium, 4mm thick.
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Aluminium
Anodized aluminium
Other colors may be delivered on request
E 3www.larus.pt | +351 234 520 600
Signage systems with a simple, economical and easy maintenance conception. Use of round tubes in the Rondo Line and square tubes in the Quadris Line.
Quadris | rondo linedesign Larus
Signage
E 4
Rondo line Standard pole
Standard plate
height: 3m
Ø80mm | 3mm thickness665x200mm
Stainless steel M8 screws,with a Torx semi-sphericalhead, with a special key
Quadris line
Standard pole
Standard plate
height: 3m
80mmx80mm | 3mm thickness600x200mm
Stainless steel M8 screwsTube, base and plates inmetallized and painted steel
Rondo LinePost: on circular bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1).Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Quadris LinePost: on square bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1).Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Other colors may be delivered on request
E 5www.larus.pt | +351 234 520 600
Check-Up Track
authorship Iberia Healthcare, Dr. António
Lúcio Baptistadesign Larus, Marta Afonso
Based on the concept of “Self-Assessment”, “Check Up Tracks” were designed to be mainly developed in municipal structures already in place, with pedestrian footpaths that serve the local population.In the designated areas 11 billboards are placed along a training circuit already indi-cated through complementary directional signposts. Along the way, the park users are encouraged to perform a series of physical tests which will help alert them or make them aware of various health related issues. All of the readings are then recorded onto a sheet of copy paper which is delivered to the users and which they may use as reference in the future. A copy of this sheet may also be left at the park enabling the undertaking of studies and statistics regarding the general health of the local population.Before starting their pedestrian circuit, users are referred to the “Check up Centre”, an indoor area, where they may find a series of medical equipment and informational boards.After undertaking the various assessments available there, they should go outdoors again so they may start the circuit.
Signage
E 6
600
1800
1000
200
200
500
600
1800
1000
200
200
500
300
ROTATIONAL VIBRATINGPLATFORM
extra equipment
PEDOMETERStep counter
TAPE MEASUREMeasurement of Abdominal Circumference
OXIMETERMeasuring the concentration of oxygen in the blood
SPHYGMOMANO-METERMeasuring of Blood Pressure
UROFLOWMETRYDetection of Prostate related problems
PODOSCOPEFoot assessment tool
HEART REAT MONITOR
SUGAR LEVEL METER
DEFRIBILLATOR Basic life support
SCALES + HEIGHT GAUGEMeasuring of Body Weight andMeasuring of Height
INDOOR - CHECK-UP CENTER Equipments
OUTDOOR - PEDESTRIAN PATH
INDOOR
Indoor panelStructure: bended aluminium sheet OL.838059.1 anodized (LR AP1).Digital printed vinyl directly applied.Fixings: threaded rods (LR F6).
OUTDOOR
Outdoor panelStructure: S275JR (LR A1) 2mm circular pole, metallized and painted steel. S275JR (LR A1) 3mm bended steel sheet, stripped, metallized and painted; welded. Standard version RAL 7011 (LR RA5). Panels: HPL phenolic resin / MEG Wood finish SEI - A (LR RF1). Low relief engraving and digital printed vinyl.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Directional plateOutdoor panel Traveled Distance
Directional platesPlate: S275JR (LR A1) stripped, metallized and painted steel. Standard version RAL 7011 (LR RA5). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Traveled distance plateStructure: AISI 316 (LR AX2) brushed stainless steel sheet. Footprint placed every 100m indicating traveled distance, serving as feedback for health professionals in case of circulatory or joint problemsFixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Stainless steel
Other colors may be delivered on request
Phenolic resin panels
E 7www.larus.pt | +351 234 520 600
Mini Totem design Larus
Signage
Totem for cultural and tourist information to be installed next to locals and buildings of interest.
E 8
40040
1500
1800
60040
4040
Liquid painting
Metallization
Steel
Other colors may be delivered on request
Structure: S275JR stripped, metallized and painted steel sheet.Colour to be chosen by the client.Information via serigraphy (1 colour).Front & rear information appliacation possible.Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.
F 1www.larus.pt | +351 234 520 600
Mupi information panel in console or totem style display cases, for standard sized posters. Single or double sided, with the possibility of lighting.
Mupidesign Pedro Martins Pereira | Larus
Shelter
F 2
160
610
1940
540
1170
1400 190
1710
2570 2700
1400
160
Panel mupi Totem Mupi
Mupi Console PanelStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Lighting: T5/G5/28W (lower consumption).Electronic ballasts (non strobe effect).Fuse isolation (for greater protection).Hydraulic shock absorbers (doors).Glass: 6 mm tempered. 5 mm opal acrylic plate for displaying of posters.Opening doors: with hinges on the top end.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
Mupi Totem PanelStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Lighting: T5/G5/28W (lower consumption).Electronic ballasts (non strobe effect).Fuse isolation (for greater protection).Hydraulic shock absorbers (doors).Glass: 6 mm tempered.5 mm opal acrylic plate for displaying of posters.Opening doors: with hinges on the top end.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Tempered glass
Electric instalation
F 3www.larus.pt | +351 234 520 600
Shelter with a very discreet design, easy to integrate into urban, rural, historical or con-temporary spaces.
Arqui shelterdesign Jorge Trindade | Larus
Shelters
F 4
3100
2500 2500
3100 3300
2500
1437
Shelter with MupiShelter with lateralShelter without lateral
Open-sided shelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Shelter with sidesStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tempered glass.Sides: 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Shelter with MupiStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass.Mupi: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Varnish
Tempered glass
Wood
F 5www.larus.pt | +351 234 520 600
Porch structure. Different positioning possi-bilities in accordance with the width of the pavement.
Daciano da Costa shelterdesign Daciano da Costa
Shelters
F 6
1100
2390
3980
1680
2390
1900
1300450
450
AB2 shelter
AB1 shelter
AB1 ShelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. 8 mm tempered glass.Cover: polyester resins reinforced with fibreglass. Suspended ceiling: maritime plywood.Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).
AB2 ShelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Tempered glass.Suspended ceiling: maritime plywood.Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Varnish
Tempered glass
Wood
Marine plywood
F 7www.larus.pt | +351 234 520 600
The porch is the linking element between two diagonal plumb bobs, allowing for them to join together side by side, without disturbing the casual look of this design.
Pórtico shelterdesign Jorge Alves
Shelters
F 8
1400
Ø127
3000
2600
3150127 127
1400
Side by side shelters
Structure: Round, S275JR (LR A1) steel tube and bent metal plate, both stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tempered glass.Cover: S275JR (LR A1) steel. Color to be defined. Bench: perforated S275JR (LR A1) steel sheet, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).
Foundations to be carried out by the client according to technical information made available.
Liquid painting
Metallization
Steel
Tempered glass
F 9www.larus.pt | +351 234 520 600
Polis Shelterdesign Larus
F 10
3000
2350
1400
technical informationsteel/stainless steel, cast iron, metallization, galvanization, woods, finishing paint, rotomolding, electricity
ZnFe
STEEL / STAINLESS STEEL
Steel is an alloy combining iron and carbon, with a maximum carbon content of approx. 2.1%.
The non-alloy steel with low carbon content(<0.3%), has a high ductility and goodcharacteristics for the mechanical work andwelding, being the structural steel used byLarus (EN10025).
Steels with a high content of alloying elements, such as stainless steel, contain at least 11% of chromium, ensuring a high resistance against corrosion, forming a thin adhesive film, which protects the material from corrosive attacks in contact with water or moist air. With the appropriate additions of chromium, nickel and molybdenum, it is possible to obtain alloys particularly suited to be used in saline or acidic environments (AISI 316), being the stainless steel adopted by Larus.
CAST IRON
Cast iron is a ferrous alloy with a carbon content higher than 2%.
The lamellar gray cast iron (because it has a grey fracture surface, due to the presence of graphite in the form of flakes) solidifies in astable way, as a result of a chemical com-position within certain parameters, such as high levels of carbon and silicon and of slow cooling laws.This alloy has a high capacity for vibrationdamping, high aptitude for machining, facili-tated by the graphite flakes which have a lu-bricating function, good corrosion resistance in many common environments (greater than carbon and steel) and a reduced contrac-tion of metal associated with good fluidity that facilitates the casting of complex parts produced by Larus.
lamellar nodular
Nodular or spheroidal cast iron is obtained by the liquid bath treatment, with the intro-duction of a small addition of alloying ele-ments (inoculants). The graphite precipitates, not in the form of flakes, but in the form of nodules or spheres, improving substantially its mechanical properties, which approaches it to steel in ductility and tensile strength, being used by Larus particular situations.
METALLIZATION
Protection of a surface, that consists on theprojection of zinc or of a zinc / aluminum alloy (85% Zn – 15% Al), melting and projec-ting the metal wires with a gas (O2 propane or O2 acetylene) or electric pistol.
To be durable, allowing the proper adhesionof the metallization, a careful preparation of the surface of the metal piece is required, to achieve the degreasing, the deoxidation and the necessary roughness of the metal. An abrasive jet of shot blasting SA 2.5 - 3 SA is used (dry compressed air projection – dry and oil-less – or through turbines)
The thickness of the zinc layer comes from the mechanical deposit of zinc particles in the roughness of the support, obtained bysuccessive passages until a minimum thick-ness of 30-40 microns is reached.
ZINCWIRE
AIR COMPRESSEDOXIGEN
ACETYLENEPROPANE
SIS 055900 NormAFNOR NormsA91701 / NBN755 / iso 2063
Painting on metallization
The roughness of the surface favors the per-fect adhesion of subsequent paintings:
- A first layer using very diluted ink (+ or - 30%), applied a maximum of 40 hours after metallization;- Following layers, finishing or intermediate, can be applied immediately after.
Advantagens:
- Long lasting protection against corrosion,with an excellent abrasion resistance, whichlimits the frequency and cost of the mainte-nanceand the assembly of metallic structures, byadjusting the thickness of the coating,depending on the aggressiveness of theenvironment.
- It is an ideal surface for subsequent appli-cation of painting (first layer and finishing).
- No change of the mechanical properties.
Disadvantages:
- The interior areas of pieces are not protec-ted.
GALVANIZATION WOODS
Protection of the surface, obtained by theimmersion in a bath of liquid zinc (min 98%of pure zinc) at about 450 °C. The partsare immersed long enough to reach thebath temperature and then are slowlywithdrawn.
The zinc metallurgically reacts with themetal surface of the piece, forming a zinc/iron alloy whose chemical compositionvaries from 25% Zn - 75% Fe at the base,up to 100% Zn at the surface. Thethickness of the zinc layer obtained is atleast 60 microns.
(100% Zn)
(94% Zn 6% Fe)
(94% Zn 10% Fe)(75% Zn 25% Fe)Metal base
The preparation of the surface of the metalpiece is of paramount importance. It isapplied the same method used to preparesurfaces for metallization.
Painting on galvanization
The surface is phosphatized after a slightabrasive blasting.The Phosphatizing creates a crystallinesurface of phosphates with an appropriateroughness to maximize the adhesionbetween the ink and the zinc layer.
Advantagens:
- As galvanization involves the totalimmersion of the piece, all the surfacesare coated. Even the inside of tubes orhollow parts.
- The thickness of the coating is fairlyuniform, ensuring protection in critical areassuch as edges and corners.
Disadvantages:
- The surface may present runoff of thezinc bath.
Wood is one of the most important buildingmaterials and requires an energy comsump-tion for its production (5 to 7.5 KWH / Ton) much lower than other materials (concrete 25 to 300; glass 6000, plastic 8200 to 20.000, aluminum 72.000).It is also the only renewable building materialand neutral regarding the CO2 emission.
In several conditions it is essential to useprotective measures:
- In contact with ground water, or soaked, the wood may be attacked by fungi;
- In environments of low oxygen content, thewood may be attacked by bacteria;
- Used outdoors, it is susceptible of havingcracks caused by the absorption of water;
- Subject to the action of UV rays, lignin, acomponent of the wood, rots.
Thus, for each use it is necessary to apply the woods with the most recommended features, as well as to employ preserving treatments.
Structure of the wood
Soft wood Hard woodaxial cut
radial
cuttangential cut
axial cut
radial
cuttangential cut
The lighter and softer species have simplerconstruction than the harder and denserspecies.
The shape, the constitution and size of the cells of the tree determine the nature and theproperties of the wood. The cells of the innerlayers are no longer alive and are usually da-rker, due to the formation of resin and oxides that provide natural protection. These cells are closed to fluid transport. Usually this is the most durable and less subject to waterpenetration area. Thus, the protective me-asures are specifically targeted to the outer layers.
A living tree has a water content of above 40%. After slaughter, the water content decreases. At first, the free water evaporates, until reaching the saturation point of the fi-bers. Here, the remaining water is retained in the cell walls and its content is around 30%, depending on the temperature.If the wood dries below the saturation point of the fiber, it shrinks, but it swells again if it ismoistened.
Contraction by drying
tangential
radial
The contraction of the wood is very differentdepending on the direction:
- The tangential contraction is about twice the radial contraction;
- The axial (length of the torus) contraction isvery low, not relevant.
Dense woods have a greater contraction than the light ones. The wood should be dried out before use (until the characteristic content moisture of the application area).
Cells
Green wood(over 30% of water)
Wood at the point ofsaturation of fiber(about 30% of water)
Absolutely dry wood
Cracks and warping
When hitting one side of the timber, thesun and wind remove the surface water. Thewater in the interior will come to the surface at a speed slower than its removal from thesurface. The peripheral layers (more dry)shrink more than the inner layers (more humid), creating internal tensions that are re-lieved with the opening of cracks that soften when the external humidity increases.
FINISHING - PAINT
In the case of a board, the warping is causedby the contraction of the layers under the sunand wind effect, in opposition to the oppositeside, that doesn´t contract in the same wayand is unable to completely counteract thiseffort. Therefore the use of wide boards should be avoided.
The wood cracks the most the lower its den-sity is, because there are more empty spaces between the cells occupied by air.
The wood most used by Larus in its furniturelines is Tali.
This is an exotic wood from Central Africawhich, therefore, is not subject to the action of European agents such as worms, fungi, wood decay, etc. Due to its high density (900 kg/m3), it is very resistant to water pe-netration and thus to the consequences that affect more severely the less dense woods.
Protective varnish
The action of the U.V. rays causes thedegradation of lignin, favoring its decay to athickness that varies between 1mm and 2mm. For a better protection, the varnish used by Larus has iron oxides and other components that, working as lamellae paral-lel to timber surface, promote the reflection of the U.V. rays. The greater the number of varnish applications is, the greater the UV protection would be. However, it darkens the color of the wood.
The wooden slats found in furniture areprotected by non-toxic varnish (aqueous solvent) that is particularly suitable for the use of children.
The initial protection, carried out in the fac-tory, includes the application by immersion of a wood filler that, in addition to improve the U.V. protection, promotes the adhesion of resin to wood, followed by a minimum of two varnish coats without sanding between coats.
Maintenance of Wooden SlatsThe wooden slats require maintenance thatdepends on the environment where theequipment is installed:
- Sanding the wooden slats individually,preferably after cleaning the layer that con-tains decomposed lignin (if this has already occurred).The wooden slats must be sanded to removeany remaining varnish and prepare them forthe varnish, which will provide the necessaryprotection.
- Apply at least two coats of non-toxic varnish (which may be provided by Larus), without sanding between coats.
The regularity of maintenance depends on the environment in which the wooden slats are installed. In a place with natural environmental aggressiveness, it is recom-mended that the maintenance is performed within two-year intervals, when the wooden slats begin to show some wear. This time period should be reduced with the increasing aggressiveness of the environment. With a greater number of varnish coats, we enlarge the time period between maintenance.
Liquid paint - Enamel Forge
On the primary is applied metal enamel withhigh anticorrosive power and weatherresistance. It gives the appearance of wrou-ght iron, with a color formulated for Larus.
Liquid Paint – Epoxy
If we need higher durability, hardness andresistance while maintaining the look of wrought iron, we apply multifunctional epoxy iron oxide paint.
Liquid Paint - Synthetic Enamel
It is an alkyd, solvent, bright, used for thepainting of steel structures. It has good glossretention.
Liquid paint - Polyurethane Enamel
With high brightness, is used in the painting of metal structures. It has high gloss reten-tion and risk resistance. It has an excellent adhesion to iron and wood. It reveals high resistance in corrosive environments.
Dry Paint - Electrostatic powder coating
Without solvents, this paint is used in drypowder. The powder receives a positive electric charge making it electrostatically attracted by the piece. It is cured under heat at 200 ° C.During this process the powder melts into auniform film which, that after cooling, resultsin a uniform coating with excellent finishing.This process presents excellent adhesioncharacteristics, abrasion resistance andchemical resistance. It is an environmentallyfriendly process because it contains no solvents, non-emitting volatile organic com-pounds (VOCs) into the atmosphere.
RAL 5003
RAL 5017
RAL 6029
RAL 6024
RAL 1021
RAL 1016
RAL 3000
RAL 7013
RAL 9001
RAL 9004
ROTOMOLDING ELECTRICITY
Kiosks and Terraces
Protection of People
The protection against electric shock and direct and indirect contact must be ensured, guaranteeing the extinction of defects within the established maximum times (according to the Technical Rules of Low Voltage Electrical Installations).
In the use of TT system (neutral earthed andearthed mass), protection against electric shock requires the implementation of securitymeasures.
In the case of direct contacts, is used theisolation of the active parts or equipments with enclosure IP code equal or superior than IP2X (when it isn’t possible to isolate the active parts).In addition, high sensitivity differential devicesare installed (I n<30mA).
In the case of indirect contacts, differentialdevices are used with sensitivity according tothe circuit to be protected conditions (humi-dity, type of users). Since there are several metal masses accessible simultaneously (kitchens) it is assured the equalization of mass powers.
Facility Security
Due to its serious consequences, in the design of electrical installations the protection against overloads and short circuits is assu-red. Thermal-Magnetic Breakers are installed(automatic cutting devices) at the origin of the circuits, ensuring the protection against these two phenomena and that the circuits do not work for long periods in over load conditions (avoiding overheating) and that short circuits are eliminated before the thermal fatigue time of conductors (avoiding damage to the insulation and changes in the properties of conductor).
Interior Lighting
The facilities are designed according to thecharacteristics of space, ensuring high levelsof energy efficiency and visual comfort.The compact fluorescent lamps with integra-ted electronic ballast (energy saving lamps), used in kiosks and terraces, ensure an efficient interior lighting.
CFLs advantages:
- Low energy consumption
- Good color rendering index (CRI> 85)
- High average length of life (6000h)
- Several color temperatures available
(2700K to 6500K, from warm white to cool
white)
- Elimination of flicker effect (causing eye
strain)
Public Lighting
The main objective is to ensure the safety ofusers of outdoor public spaces (gardens,footpaths, urban roads, high ways) by the implementation of lighting systems thatprovide light levels suitable for the space to be illuminated (EN 13 201).The lighting poles produced by Laruscombine an attractive design with good quality of light.The light quality varies depending on thelighting source used, being constrained bythe color temperature and by the color rendering index (CRI) provided. In order to obtain a high quality of light, Larus uses metal iodide lamps and, more recently, LED light fixtures (light emitting diode).
Characteristics of metal iodide lamps:
- Good color rendering index (CRI> 80)
- Color Temperature (2800K, warm white)
- Average length of life (6000h)
Characteristics of LED light fixtures:
- Good color rendering index (CRI> 75)
- Color Temperature (5300K, cool white)
- Average length of life (60000h, the highest
among all sources of light)
- Low energy consumption
Autonomous lighting columns (not con-nected to the mains electricity system):
The development of LED and Photovoltaictechnology, enables the design of autono-mous lighting poles, as is the case of Larus Solar Pole. Such lighting poles produceelectricity during the day through an integrated photovoltaic generator, which is stored in a battery bank and used later in the night period to feed the lamp. This way, it is possible to remove the energy consumption from the mains and to significantly reduce the manpower, cost and assembly time of the lighting poles, since it is not necessary to install electrical feeding circuits, making theopening of ditches unnecessary.
Rotomoulding is a transformation process of polymers, like polyethylene (PE), polypropyle-ne (PP) or PVC.
It’s a thermic process, in which the polymers powder is filled into a mould, which is expo-sed to a biaxial movement and heated to a temperature which can go until 300ºC. The high temperature enables the fusion of the polymer, while the biaxial movement enables the distribution of the material throughout the surface of the mould. After the pre-defined moulding cycle time, the heating is stopped and the cooling cycle starts to harden the polymer and enable a secure demoulding process. During the cooling cycle the biaxial movement is maintained, while the cooling is done by pressured air.
RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.
Other colors may be delivered on request.