Airless Line-Marker Manually propelled

Perfect marking ●

dApplication oriente ●

Extremely powerful ●

LineCoat

Professional Finishing

central for wide line

left

right

central for double line

possible.

wide lines up to 60 cm are also

the gun selection lever. Extra

of one or two guns by moving

Selective triggering operating convenience

optimal working speed and high

machines for the greatest precision,

Perfectly equipped family of marking

tools.

- without quickly and easilycan be set

desired positionsfrom the surface. The

angle of the nozzle and the distance of the gun

The width of the stripe depends on the spraying

terrains.

on different quiet stable runningensure

. Large pneumatic tyres parkand to transport safe Due to the locking brake on both sides the unit is

applications).

of by these practical fixture (for conventional airless

and out of the way: this is taken care Tidied up

pump technologythanks to hydraulic Extremely powerful

.lastinglong and reliableare particularly

Honda petrol engines powerfulThe

. bar230 up to can be smoothly regulated

For optimal customisation the pressure

by the extremely resistant material.

against aggressive and abrasive materials

cylinder and piston rods are protected

positive effects. The running faces of the

service life for the equipment are further

Low wear and a correspondingly long

. quality superb line with speed

high marking The result is a

particularly Airless marking paints.

of all types, viscosity materialshigh This improves the application of

. spraying powerthus

and higher suction powercross section of the suction system provides

increase in power combined with the large

than with directly driven pumps. This

piston makes a considerably longer stroke

is indirectly driven by hydraulics. Here the

The material pump on the LineCoat units

LineCoat

interruption. (optional)

sites to be worked through without

This practical container allows large

supply of material: HopperKit – 45 litre

for the widest range of marking workApplication oriented

off in the desired direction.

on the left hand grip and start

wheel. Simply pull the trigger

and unlocking of the running

made possible by the locking

transition to straight lines is

, and a smooth and circlesPrecise curves, radii

.Airless applicationsor other

(e.g. symbols) manual workalways available for is

holder in a single operation, so it

You can release the gun from its

working power.

and regulation of the required

setting ConvenientStepless engine control:

.edgessharp and pattern spray

perfect nozzle, provides a

Finish Linewith the new TradeTip 2

The airless gun, in combination

for effective lining jobs.

operation and increased working speed

greatest working convenience. Ease of

propelled marking units provide the

Thanks to their direct drive, these self

runs.

be carried out in comfort over long

a seat, allowing marking work to

The LC 880 SP can be coupled to

:comfortableConvenient and

wards, making for untiring work.

will automatically run forwards or back-

One movement for the hand and the unit

Both units have a manually engaged drive.

- perfect track alignment

constant tempo-

Benefit:

slopes.

r upward or downward adjusted fo

hydraulics the speed can be ideally

ion of the Thanks to the regulat

""Good movers

LineCoat 880 SPLineCoat 860 SP

Competition

for any application, indoors or outPerfect marking

halls, ...

roads, parking areas, sports areas, airports, storage

maintaining lines and markings on communal areas,

Mature Airless equipment for making, remaking and

The family of marking units from Wagner:

for exact lines FinishLineTradeTip 2

.qualityfirst class marking and long-life nozzle quality ensure

Easy to use, precision technology

spray jet widths.

with different nozzle sizeslarge selection of You have a choice from a

coverage powerconsistently high ➜ sharp edges ➜precise lines➜

marking work excels due to:

nozzle for high quality lining and

The spray pattern of the special

TradeTip 2

A selection of 5 powerful machines

objects and buildings.

ventional airless coating of

coating materials with con-corrosion proofing or roof

based materials, bitumen,

emulsions, latex paints, water

in Airless grade, but also

all standard marking paints

With LineCoat you can apply

of uses.

in perfect power class for a wide range

-professional unit all-rounder The

LineCoat 840

a starter unit for small jobs.

as – ideal unitcompact The

LineCoat 820

——————————————————————Order reference number 0555 135

+ TradeTip 2 LineFinish nozzle 1708+ TradeTip 2 nozzle holder+ HP hose, DN6, 15 m+ AG 08 Airless gun, specialsuction system, Basic unit on cart, inc. flexible Spray Pack:——————————————————————

820LineCoat

—————————————————————— Order reference number 0555 145

1708 TradeTip 2 LineFinish nozzle + TradeTip 2 Nozzle holder+ HP hose, DN 6, 15 m+

+ 2nd gun connection complete+ AG 08 Airless gun, specialsuction system, Basic unit on cart, inc. flexible Spray Pack:——————————————————————

840LineCoat

to 60 cm5 to 30 cm 5Line width

“0.0330.028“ 2 guns

0.048““ 0.036Max. nozzle size: 1 gun

)188 m/min. (11.3 km/h m/min. (9.7 km/h) 161Max. spraying speed

litres/min8.2 litres/min 5Max. delivery rate

)23 MPa (230 bar MPa (230 bar) 23Max. pressure

HydraulicHydraulic Pump drive

W / 12 V5050 W / 12 V Electrical system

kg111 kg 107Weight

4 kW / 5.5 PS (Honda) kW / 4 PS (Honda) 3.0Engine rating

LineCoat 840LineCoat 820 echnical Data T

LineCoat

.Available as standard or selfpropelled version

for marking and lining jobs of all types.

– powerful nePowerful o The

LineCoat 860 SPLineCoat 860

—————————————————————— Order reference number 0555 175

seat+ + TradeTip 2 LineFinish nozzle 1708+ TradeTip 2 Nozzle holder+ HP hose, DN 6, 15 m + 2nd gun connection complete + AG 08 Airless guns, specialsuction system, Basic unit on cart, inc. flexible Spray Pack:——————————————————————LineCoat 880 SP

peak performance.

With comfortable seat and particularly high

ful for marking and lining jobs of all types.

with a seat – power- Mobile one The

LineCoat 880 SP

5 to 60 cm5 to 60 cm Line width

0.038““ 0.0382 guns

“0.052“ 0.052Max. nozzle size: 1 gun

)266 m/min. (16 km/h215 m/min. (12.9 km/h) Max. spraying speed

8.9 litres/min. litres/min. 8.9Max. delivery rate

MPa (230 bar23 ) MPa (230 bar) 23Max. pressure

HydraulicHydraulic Pump drive

50 W / 12 V W / 12 V 50Elektrical system

)44 kg (seat: 169 kg116 kg (LineCoat 860 SP: 123 kg) Weight

5.9 ) kW / 8 PS (Honda kW / 5.5 PS (Honda) 4Engine rating

LineCoat 880 SPLineCoat 860 / LineCoat 860 SP Technical Data

—————————————————————— Order reference number SP 0555 165

0555 155Order reference number

1708 TradeTip 2 LineFinish nozzle ++ TradeTip 2 Nozzle holder

HP hose, DN 6, 15 m+ 2nd gun connection complete +

+ AG 08 Airless guns, specialsuction system, Basic unit on cart, inc. flexible Spray Pack:——————————————————————LineCoat 860 (860 SP)

LineCoat Accessories

0556 042 TradeTip 2 nozzle holder, F thread

0556 041 TradeTip 2 nozzle holder, G thread

Airless guns 0296 392 AG 08 Airless gun, F thread /250 bar, specially

for road marking units

0555 925 2nd gun connection complete

(AG 08 Airless gun special, TradeTip 2 LineFinish nozzle,

TradeTip 2 holder, 2.5 m HP-hose, fitting materials)

TradeTip 2 Nozzle system

Gun filter inserts (10 off)0097 022 Filter insert, extra fine, 180 MA/0.084 mm MW, red

0097 023 Filter insert, fine, 100 MA/0.014 mm MW, yellow

0097 024 Filter insert, medium, 50 MA/0.315 mm MW, white

0097 025 Filter insert, coarse, 30 MA/0.560 mm MW, green

(MA = No. of meshes, MW = mesh size)

HD Filter systems (with check valve)0349 707 Filter cartridge, 0 MA

0349 431 Filter cartridge, 5 MA

0349 704 Filter cartridge, 50 MA

0349 705

Filter cartridge, 100 MA

(MA = No. of meshes)

High pressure hoses9984 574 HP hose DN6 / 15 m / 270 bar / NPS 1/4“

0509 874

HP hose DN6 / 1.8 m / NPS 1/4“

Material reservoir 0555 910 Hopper Kit - 45 litre material reservoir

Glass bead spreader device0254 913

0254 915

complete for 15 cm line width (6“)

Aux. set for 2nd gun 15 cm (6“)

Extras

TradeTip 2 LineFinish nozzles

Nozzle marking

Bore Line inches (mm) width

Order Ref. No.

15er

17er

19er

21er 23er

1504 0,015 (0,38) up to 70 mm 056 1504

1508 0,015 (0,38) up to 140 mm 056 1508 1704 0,017 (0,43) up to 70 mm 056 1704

1708 0,017 (0,43) up to 140 mm 056 1708 1712 0 ,017 (0,43) up to 210 mm 056 1712

1904 0,019 (0,48) up to 70 mm 056 1904 1908 0,019 (0,48) up to 140 mm 056 1908

1912 0,019 (0,48) up to 210 mm 056 1912 2108 0,021 (0,53) up to 140 mm 056 2108

2112 0,021 (0,53) up to 210 mm 056 2112 2308 0,023 (0,58) up to 140 mm 056 2308

2328 0,023 (0,58) up to 300 mm 056 2328

0556 037 TradeTip 2 nozzle holder seal set

TradeTip 2 LineFinish nozzles:

Large selection of nozzle sizes with different line width. (See table)

0555 920 FloatingKit - Damping system

0097 108 Hopper incl. special cleaner

0097 110 Special cleaner for TipClean (1 liter)

Professional Finishing

www.wagner-group.com

Printed

Ask about other products from WAGNER: Low pressure air spraying equipment, hydraulic and diaphragm pumps,

plaster spraying equipment, material feed logistics …and much more.

TipClean nozzle cleaning