Lecture 5

1Lecture 5: Waveguiding in optical fibers

Meridional / skew rays and their vectorial characteristics Concept of linearly polarized modes Cutoff condition / wavelength Selected key concepts on singlemode fibers

Advanced materials Field analysis of the weakly guiding fiber* Solving the wave equation* Eigenvalue equation for linearly polarized modes*

Reading: Senior 2.4.1, 2.4.3, 2.5.1, 2.5.2, 2.5.3Keiser 2.3 2.8

Part of the lecture materials were adopted from powerpoint slides of Gerd Keisers book 2010, Copyright The McGraw-Hill Companies, Inc.

2Meridional and skew rays A meridional ray is one that has no component it

passes through the z axis, and is thus in direct analogy to a slab guide ray.

Ray propagation in a fiber is complicated by the possibility of a path component in the direction, from which arises a skew ray.

Such a ray exhibits a spiral-like path down the core, never crossing the z axis.

3Skew ray decomposition in the core of a step-index fiber

(n1k0)2 = r2 + 2 + 2 = t2 + 2

4Vectorial characteristics of modes in optical fibers TE (i.e. Ez = 0) and TM (Hz = 0) modes are also obtained within the circular optical fiber. These modes correspond to meridional rays (pass through the fiber axis).

As the circular optical fiber is bounded in two dimensions in the transverse plane, => two integers, l and m, are necessary in order to specify the modes

i.e. We refer to these modes as TElm and TMlm modes.

core

cladding

fiber axis core

cladding

xz

5 Hybrid modes are modes in which both Ez and Hz are nonzero.

These modes result from skew ray propagation (helical path withoutpassing through the fiber axis). The modes are denoted as HElmand EHlm depending on whether the components of H or E make the larger contribution to the transverse field.

core

cladding

The full set of circular optical fiber modes therefore comprises: TE, TM (meridional rays), HE and EH (skew rays) modes.

6 The analysis may be simplified when considering telecommunications-grade optical fibers. These fibers have the relative index difference the propagation is preferentially along the fiber axis ( 90o).i.e. the field is therefore predominantly transverse.

=> modes are approximated by two linearly polarized components.

7 These linearly polarized (LP) modes, designated as LPlm, are good approximations formed by exact modes TE, TM, HE and EH.

The mode subscripts l and m describe the electric field intensity profile. There are 2l field maxima around the the fiber corecircumference and m field maxima along the fiber core radial direction.

fundamental mode (LP01)

core Electric fieldintensity

LP11

LP21 LP02

8Intensity plots for the first six LP modes

LP01

LP11

LP21

LP02

LP31

LP12

9Plot of the propagation constant b as a function of V for various LP modes

V = (2a/) (n12 n22)1/2 = (u2 + w2)1/2

b

V

2.405

b = (2 k22)/(k12 k22) (see p.37)

VNumberDefinition

AnimportantparameterconnectedwiththecutoffconditionistheVnumberdefinedby

10

11

The total number of guided modes M for a step-index fiber isapproximately related to the V number (for V > 20) as follows,

M V2 / 2

e.g. A multimode step-index fiber with a core diameter of 80 m anda relative index difference of 1.5 % is operating at a wavelength of 0.85 m. If the core refractive index is 1.48, estimate (a) the normalizedfrequency for the fiber; (b) the number of guided modes.

(a) V = (2/) a n1 (2)1/2 = 75.8(b) M V2 / 2 = 2873 (i.e. nearly 3000 guided modes!)

12

The cutoff wavelength for any mode is defined as the maximum wavelength at which that mode propagates. It is the value of that corresponds to Vc for the mode concerns. For each LP mode, the two parameters are related

c(lm) = (2a/(Vc(lm)) (n12 n22)1/2

The range of wavelengths over which mode lm will propagate is thus 0 < < c(lm).

For a fiber to operate single mode, the operating wavelength must be longer than the cutoff wavelength for the LP11 mode. This is an important specification for a single-mode fiber, and is usually given the designation c. We find c by setting Vc = 2.405. The range of wavelengths for singlemode operation is > c.

Cutoff wavelength

13

For single-mode operation, only the fundamental LP01 mode exists.

The cutoff normalized frequency (Vc) for the next higher order (LP11)mode in step-index fibers occurs at Vc = 2.405.

=> single-mode propagation of the LP01 mode in step-index fibers:

V < 2.405

Singlemode condition

e.g. Determine the cutoff wavelength for a step-index fiber to exhibitsingle-mode operation when the core refractive index is 1.46 and the core radius is 4.5 m, with the relative index difference of 0.25 %.

c = (2an1/2.405) (2)1/2 = 1214 nm.Hence, the fiber is single-mode for > 1214 nm.

SingleModeFibers

Singlemodefiberfeatures:

Thedimensionofthecorediameterisafewwavelengths(usually812)

Theindexdifferencebetweenthecoreandthecladdingissmall(0.2to1.0%)

Thecorediameterisjustbelowthecutoffofthefirsthigherordermode:V

15

Gaussian approximation for the LP01 mode field

The LP01 mode intensity varies with radius as J02(ur/a) inside the core and as K02(wr/a) in the cladding. The resultant intensity profile turns out to closely fits a Gaussian function having a width w0, known as the mode-field radius.

This is defined as the radial distance from the core center to the 1/e2 point of the Gaussian intensity profile.

A similar Gaussian approximation can be applied to the fundamental symmetric slab waveguide mode.

E(r) = E(0) exp (-r2 / w02)

I(r) = I(0) exp(-2r2/w02)=>

16

Mode-field diameter (MFD) = 2w0 (rather than the core diameter) characterizes the functional properties of single-mode fibers.(w0 is also called the spot size.)

ncore

nclad

core dia.

Corning SMF-28 single-modefiber has MFD:

9.2 m at 1310 nm10.4 m at 1550 nmcore diameter: 8.2 m

MFD

MFD > core diameter

ModalFieldPatterns

17

Electric field distributions of lower-order guided modes in a planar dielectric slab waveguide (or cross-sectional view of an optical fiber along its axis)

Evanescent tails extend into the cladding

Zeroth order mode

Second order mode

First order mode

Zeroth-order mode = Fundamental modeA single-mode fiber carries only the fundamental mode

18

Mode-field diameter vs. wavelength

11 m

1550 nm

c ~ 1270 nm

= 1550 nm

core

= 1320 nm

Mode-field intensity distribution can be measured directly by near-field imaging the fiber output.

Why characterize the MFD for single-mode fibers?

ModeFieldDiameter Themodefielddiameter (MFD)canbedeterminedfromthe

modefielddistributionofthefundamentalfibermodeandisafunctionoftheopticalsourcewavelength

TheMFDisusedtopredictfiberspliceloss,bendingloss,cutoffwavelength,andwaveguidedispersion

TofindMFD:(a)measurethefarfieldintensitydistributionE2(r)(b)calculatetheMFDusingthePetermannIIequation

19

20

Mismatches in mode-field diameter can increase fiber splice loss.

SMF1 SMF2

10 m

8 m

e.g. Splicing loss due to MFD mismatch between two different SMFs

splicing

~ dB loss per splice

(A related question: why do manufacturers standardize the cladding diameter?)

21

Remarks on single-mode fibers:

no cutoff for the fundamental mode

there are in fact two modes with orthogonal polarization

E E

22

Fiber birefringence

In ideal fibers with perfect rotational symmetry, the two modes are degenerate with equal propagation constants (x = y), and any polarization state injected into the fiber will propagate unchanged.

In actual fibers there are imperfections, such as asymmetrical lateral stresses, noncircular cores, and variations in refractive-index profiles. These imperfections break the circular symmetry of the ideal fiber and lift the degeneracy of the two modes.

The modes propagate with different phase velocities, and the difference between their effective refractive indices is called the fiber birefringence,

B = |ny nx|

23

Corning SMF-28 single-mode fiber glass geometry

1. cladding diameter: 125.0 0.7 m

2. core-cladding concentricity: < 0.5 m

3. cladding non-circularity: < 1%[1- (min cladding dia./max clad dia.)]

Real optical fiber geometry is by no means perfect.

24

State-of-polarization in a constant birefringent fiber over onebeat length. Input beam is linearly polarized betweenthe slow and fast axes.

slowaxis

fastaxis

Beat lengt

h

/2

3/22

Lbeat = / B ~ 1 m(B ~ 10-6)

*In optical pulses, the polarization state will also be different for different spectral components of the pulse.

GradedIndexFiberStructure Thecoreindexdecreaseswithincreasingdistancer fromthe

centerofthefiberbutisgenerallyconstantinthecladding.

Themostcommonlyusedconstructionfortherefractiveindexvariationinthecoreisthepowerlawrelationship:

25

The local numerical aperture is defined as

A typical valueof is 2.0

FiberMaterials(1)Sincethefibercladdingmusthavealowerindexthanthecore,

examplesofglassfibercompositionsare

1.GeO2SiO2core;SiO2cladding

2.P2O5SiO2core;SiO2cladding

3.SiO2core;B2O3SiO2cladding

4.GeO2B2O3SiO2core;B2O3SiO2cladding

26

FiberMaterials(2)Thegrowingdemandfordeliveringhighspeedservicesdirectlytotheworkstationhasledtohighbandwidthgradedindexpolymer(plastic)opticalfibers (POF)foruseinacustomerpremises

27

PhotonicCrystalFibers(PCF) ThecoreregionsofaPCFcontainairholes,whichrunalong

theentirelengthofthefiber

ThePCFmicrostructureoffersextradimensionsincontrollingeffectssuchasdispersion,nonlinearity,andbirefringence

ThetwobasicPCFcategoriesareindexguidingfibers(left)andphotonicbandgapfibers(right)

28

29

Advanced materials Field analysis of the weakly guiding fiber* Solving the wave equation* Eigenvalue equation for Linearly Polarized modes*

30

Field analysis of the weakly guiding fiber Here we begin the LP mode analysis by assuming field

solutions that are linearly polarized in the fiber transverse plane.

These consist of an electric field that can be designated as having x-polarization and a magnetic field that is polarized along y

the weak-guidance character of the fiber results in nearly plane wave behavior for the fields, in which E and H are orthogonal and exist primarily in the transverse plane (with very small z components).

E = ax Ex(r, , z) = ax Ex0(r, ) exp (iz)H = ay Hy(r, , z) = ay Hy0(r, ) exp (iz)

31

Because rectangular components are assumed for the fields, the wave equation

t2E0 + (k2 2) E0 = 0

is fully separable into the x, y and z components

t2Ex1 + (n12k02 2) Ex1 = 0 r a

t2Ex2 + (n22k02 2) Ex2 = 0 r a

where (n12k02 2) = t12 and (n22k02 2) = t22

32

Assuming transverse variation in both r and , we find for the wave equation, in either region

2Ex/r2 + (1/r)Ex/r + (1/r2)2Ex/2 + t2Ex = 0 We assume that the solution for Ex is a discrete series of

modes, each of which has separated dependences on r, and z in product form:Ex = Ri(r)i() exp(iiz)

Each term (mode) in the expansion must itself be a solution of the wave equation. A single mode, Ex = R exp(iz) can be substituted into the wave equation to obtain

(r2/R) d2R/dr2 + (r/R) dR/dr + r2t2 = -(1/) d2/d2

i

33

The left-hand side depends only on r, whereas the right-hand side depends only on .

Because r and vary independently, it follows that each side of the equation must be equal to a constant.

Defining this constant as l2, we can separate the equation into two equations

d2/d2 + l2 = 0d2R/dr2 + (1/r) dR/dr + (t2 l2/r2)R = 0

We identify the term l/r as for LP modes. The bracketed term therefore becomes t2 - l2/r2 = r2

34

Solving the wave equation We can now readily obtain solutions to the equation:

() = cos(l + ) or sin (l + )where is a constant phase shift.

l must be an integer because the field must be self-consistent on each rotation of through 2.

The quantity l is known as the angular or azimuthalmode number for LP modes.

35

The R-equation is a form of Bessels equation. Its solution is in terms of Bessel functions and assumes the form

R(r) = A Jl(tr) t real

= C Kl(|t|r) t imaginary

where Jl are ordinary Bessel functions of the first kind of order l, which apply to cases of real t. If t is imaginary, then the solution consists of modified Bessel functionsKl.

Solving the R wave equation

36

Bessel functions

Ordinary Bessel functions of the first kind

Modified Bessel functions of the second kind

The ordinary Bessel function Jl is oscillatory, exhibiting no singularities (appropriate for the field within the core).

The modified Bessel function Kl resembles an exponential decay(appropriate for the field in the cladding).

2.405

37

Define normalized transverse phase / attenuation constants,

u = t1a = a(n12k02 2)1/2w = |t2|a = a(2 n22k02)1/2

Using the cos(l) dependence (with = 0), we obtain the complete solution for Ex:

Ex = A Jl(ur/a) cos (l) exp(iz) r aEx = C Kl(wr/a) cos (l) exp(iz) r a

Similarly, we can solve the wave equation for Hy

Hy = B Jl(ur/a) cos (l) exp(iz) r aHy = D Kl(wr/a) cos (l) exp(iz) r a

where A Z B and C Z D in the quasi-plane-waveapproximation, and Z Z0/n1 Z0/n2

39

Electric fields of the fundamental mode

The fundamental mode LP01 has l = 0 (assumed x-polarized)

Ex = E0 J0(ur/a) exp (iz) (r a)Ex = E0 [J0(u)/K0(w)] K0(wr/a) exp (iz) (r a)

These fields are cylindrically symmetrical, i.e. there is no variation of the field in the angular direction.

They approximate a Gaussian distribution. (see the J0(x) distribution)

40

Intensity patterns

The LP modes are observed as intensity patterns.

Analytically we evaluate the time-average Poynting vector

|| = (1/2Z) |Ex|2

Defining the peak intensity I0 = (1/2Z) |E0|2, we find the intensity functions in the core and cladding for any LP mode

Ilm = I0 Jl2(ur/a) cos2(l) r aIlm = I0 (Jl(u)/Kl(w))2 Kl2(wr/a) cos2(l) r a

41

Eigenvalue equation for LP modes

We use the requirement for continuity of the z components of the fields at r = a

Hz = (i/) ( x E)z ( x E1)z|r=a = ( x E2)z|r=a

Convert E into cylindrical components

E1 = E0 Jl(ur/a) cos(l) (arcos asin ) exp (iz)E2 = E0 [Jl(u)/Kl(w)] Kl(wr/a) cos(l) (arcos asin ) exp(iz)

42

Taking the curl of E1 and E2 in cylindrical coordinates:

( x E1)z = (E0/r) {[lJl(ur/a) (ur/a)Jl-1(ur/a)] cos (l) sin + lJl(ur/a) sin (l) cos }

( x E2)z = (E0/r)(Jl(u)/Kl(u)){[lKl(wr/a)(wr/a)Kl-1(wr/a)] cos l sin + lKl(wr/a) sin (l) cos }

where we have used the derivative forms of Bessel functions.

Using ( x E1)z|r=a = ( x E2)z|r=aJl-1(u)/Jl(u) = -(w/u) Kl-1(w)/Kl(w)

This is the eigenvalue equation for LP modes in the step-index fiber.

43

Cutoff for a given mode can be determined directly from the eigenvalue equation by setting w = 0,

u = V = Vc

where Vc is the cutoff (or minimum) value of V for the mode of interest.

The cutoff condition according to the eigenvalue equation is

VcJl-1(Vc)/Jl(Vc) = 0

When Vc 0, Jl-1(Vc) = 0e.g. Vc = 2.405 as the cutoff value of V for the LP11 mode.

Cutoff condition

Lecture 5:Waveguiding in optical fibersMeridional and skew raysSkew ray decomposition in the core of a step-index fiberWeak-guidance approximationIntensity plots for the first six LP modesPlot of the propagation constant b as a function of V for various LP modesV Number DefinitionCutoff wavelengthSinglemode conditionSingle-Mode FibersGaussian approximation for the LP01 mode fieldModal Field PatternsMode-field diameter vs. wavelengthMode Field DiameterFiber birefringenceGraded-Index Fiber StructureFiber Materials (1)Fiber Materials (2)Photonic Crystal Fibers (PCF)Advanced materialsField analysis of the weakly guiding fiberSolving the F wave equationSolving the R wave equationBessel functionsElectric field for LPlm modesElectric fields of the fundamental modeIntensity patternsEigenvalue equation for LP modesCutoff condition

Documents

Lecture 5