LED High Bay 100W PRODUCT DATA SHEET - Penn Elcom High Bay - Data... · LED High Bay 100W . ... Light source adopts single imported high power chip integrated style design. This design

© 2014, Penn Elcom. All rights reserved

LED High Bay 100W PRODUCT DATA SHEET


1. Product introduction CLD high performance, energy efficient 100W LED High Bay adopts high-purity aluminium with

anodic oxidation processing on its surface, which looks compact and beautiful. The unique sheet radiator design which effectively generate the heat to radiator and transfer heat by air when the LED is lighting, thereby reducing the operating temperature of LED and ensure the 50000 h lifespan of LED.

Light source adopts single imported high power chip integrated style design. This design produces a high thermal conductivity, low luminous decay pure light colour output. The power supply is adopted with high efficiency, high PF power supply control system which equipped with PWM constant current and temperature compensation technology. It applies to wide input voltage (AC 100-240V), which overcomes the damage and unstable operation of the low bays due to the instability of the lighting grid and to avoid eye irritation and fatigue during working.

It reduces the energy consumption by 80% compared with incandescent, 70% compared with mercury and more than 50% compared to metal halide. It uses second distribution curve with lens and reflector to make the light curve symmetric with a circular spot.

Areas of application: - Great installation height; - Industry; - Production halls; - Warehouses.

Features: - Energy efficient replacement; - Easy installation; - 3 Years warranty.

Benefits: - Long service life: 50000 h; - High system luminous efficacy between 80-90 lm/W; - High power factor up to 0.95 or more; - Reduced maintenance costs; - Cool-running; - Instant on no flicker or hum.


2. Product components:

2.1 LED CHIP

500 mA Osram LCW-CRDP.PC Features of the LED Chip: Package: SMD ceramic package with silicone resin and silicone lens

Typical luminous flux: 136lm @ 5000K Typical luminous efficacy: 132 lm/W @ 5000K

Viewing angle at 50% Iv: 150°

Colour: 3000 K -6500 K (neutral white) Typical CRI: 72

Corrosion Robustness: Superior Corrosion Robustness

Lumen Maintenance: Test results according to IESNA LM-80 available ESD-withstand voltage: up to 8 KV (acc. to ANSI/ESDA/JEDEC JS-001-HBM, Class 3B)

Electro-optical characteristics

Model IF (mA) VF typ. (V) Flux av. (lm) CRI typ.

LUW-CRDP 500 2.95 ~ 155 72

Maximum Ratings (Ts: 25°C)

Parameter Symbol Measurement Unit Value

Operating temperature T op °C -40…+120

Storage temperature T stg °C -40…+120

Junction temperature T j °C 135

Forward current I F mA Min:100/Max:800

Surge current I FM mA 2000

Figure 2.1 Relative spectral emission – V(λ) = Standard eye response curve:

φref = f (λ),TS = 25°C,IF = 350 mA


Figure 2.2 Radiation characteristics: Irel = f (ϕ), TS = 25°C

Figure 2.3 Forward current: IF = f (VF), TS = 25°C

Figure 2.4 Relative forward voltage: ΔVF = VF – VF(25°C) = f (Tj), IF= 350 mA

Figure 2.5 Relative luminous flux: TS = 25°C Figure 2.6 Relative luminous flux: TS = 25°C


Figure 2.7 Chromaticity Coordinate Shift: Cx,

Cy = f(IF), TS = 25°C Figure 2.8 Chromaticity Coordinate Shift: Cx,

Cy = f(Tj), IF = 350 mA

2.2 DRIVER

Specifications: Lifespan: 50000 h; Device losses (at 240V): 17 W; Input current (AC, at 240V): 440 mA; Output voltage (DC): 26 V; Output current (DC): 3.13 A; Output power (at 240V): 82.66 W; ECG efficiency: 83 %; Dimmable: no; Inrush current: <=40 A; Galvanic isolation primary/secondary: <= 3 mA; Surge capability (L/N-Ground): 2 kV; Surge capability (L-N): 1 kV; Length: 148 mm; Width: 83.5 mm Height: 38.5 mm Weight: 395 g; Casing material: Aluminium; Overheating protection: Yes; Overload protection: Yes; Short-circuit protection: Yes; No-load proof: Yes; Type of protection: IP 65 (highbay IP rating).


3. Electrical and Photometrical data of High Bay

Electrical parameters

Parameter Measurement Unit Min Average Max

Mains voltage V (ac) 90 - 264

Mains current mA 380 - 1260

Operating frequency Hz 50 - 60

System wattage W 95 100 108

PF - - 0.95 -

Photometrical parameters

Testing condition: 25°C temperature

Type of reflector 120°

Parameter Measurement unit Min Average Max

Luminous flux Lm 8000 8400 9000

Beam angle deg - 150 -

Illuminance

Area

1 m lx - 3750 -

2 m lx - 937.72 -

3 m lx - 416.76 -

6 m lx - 104.19 -

8 m lx - 58.61 -

Color Temperature K - 6000-6500

CRI Ra - 72 -

General parameters

Parameter Measurement

Unit

Min Average Max

Working temperature °C -20 25 +50

Working humidity % 20% - 80%

Storage temperature °C -25 25 +55


4. Photometrical report and graphs

Figure 4.1 Luminous intensity distribution (120° reflector)

Figure 4.2 Lux distance curve (120° reflector)

Figure 4.3 ISO - Intensity (V-H) (120° reflector)


Figure 4.4 ISO candela diagram on circular web (120° reflector)

Figure 4.5 ISO illuminance diagram (120° reflector)

Figure 4.6 Luminance limiting curve (120° reflector)


Luminance table

γ 45 50 55 60 65 70 75 80 85

C0 115316 12249 2755 1174 0 0 0 0 0

C45 81928 4919 2215 635 0 0 0 0 0

C90 74475 7414 2755 587 0 0 0 0 0

Glare table

Glare Quality Service Values Illuminance (lx)

1.15 A 2000 1000 500 <=300

1.5 B 2000 1000 500 <=300

1.85 C 2000 1000 500 <=300

2.2 D 2000 1000 500 <=300

2.55 E 2000 1000 500 <=300

a b c d e g g h

Figure 4.7 Coefficient utilization curve (120° reflector)

5. UK Mains Voltage Test

Original measurements were taken in our factory and were conducted usually at 220V.

To provide the most accurate values for the electrical parameters we conducted a series of measurements in real time. The highbay was connected to mains voltage and linked to a high-end power meter. The measurements obtained are the relevant values for active power (P), reactive power (Q), apparent power (S), input current (I) and power factor (PF, not cosϕ) when the products are used with UK voltage.


Figure 5 Real time measurements

Electrical parameters at UK mains voltage Model

number Mains

voltage [V]

Mains current

[mA]

P [W]

Q [VAr]

S [VA]

PF

LEDHB100 235.9 446 99.2 35 105.4 0.94

6. Product display and dimensions

Figure 6 LED 100W High Bay dimensions


7. Installation recommendations

Step 1 Drill 3 holes in the ceiling for hanger Step 2 Fix the hanger onto ceiling

Step 3 Hang high bay on the hanger Step 4 Connect the wires properly

8. Packaging Packaging information

Model N.W [kg]

Manner of packaging Dimensions of inner box [cm]

G.W of inner box

[kg]

Dimensions of outer box

[cm]

G.W of outer box

[kg]

LEDHB100

Light Body 4.959 1 pcs in 1 inner carton, 8 inner boxes in 1 master carton

26x26x42 5.6 53.5x44.5x54.5

23.9

Reflector 90° 0.543 20pcs in 1 carton / / 54x54x55.5 13.2 Reflector 90° 0.581 20pcs in 1 carton / / 47x47x47.8 13.3

Reflector 90° 0.581 10pcs in 1 carton / / 47x47x47.8 7.3

Documents

LED High Bay 100W PRODUCT DATA SHEET - Penn Elcom High Bay - Data... · LED High Bay 100W . ... Light source adopts single imported high power chip integrated style design. This design