LED LCD TVOWNER' S MANUAL

MODEL: LE55K6500UA LE65K6500UA

LE50K6500UA

Please READ this manual carefully before operating your TV, and retain it for future reference

Contents

-1-

1、 Safety and warnings..........................................................................................................2-3

2、 Introduction.....................................................................................................................4

3. Base stand assembly ........................................................................................................ 5

4、 Wall Mount Installation.................................................................................................... 6

5、 Installation...................................................................................................................... 7-10

6、 Remote Controller...........................................................................................................11-12

7、 TV Operation..................................................................................................................13-20

8、 Trouble shooting............................................................................................................. 21

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literaturaccompanying this unit.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in accordance with the instructions.

8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lighting storms or when unused for long periods of time.

13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14) Mains plug is used as the disconnect device, the disconnect device shall remain readily

15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles, should be placed on the apparatus.

17) Attention should be drawn to the environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Protect

operational.

20)Warning: To avoid any injury caused by lean

of the product, please always ensure the whole

product was placed within the table surface in

horizontal.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING:

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION

-3-

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

SAFETY AND WARNINGS

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Do not trap the power supply cord under the television receiver.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.

Dim:515*320mm(不包括底座）

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

INTRODUCTION

-4-

Main features

Infrared Remote Controller............ 1

User’s M anual...............................1

Battery(AAA)...............................2

Accessories

Main parameter

Viewing Picture Size (Diagonal)

Resolution

Aspect Ratio

TV System

Receiving Channel

Power consumption

Signal Input/Output

Horizon

Video Signal System

Input Power Voltage

Audio Output Power

3840x2160

16 : 9

PAL-B/G, I, D/KSECAM-B/G , D/K NTSC DVB-T, DVB-C,DVB-T2

PAL/SECAM/MPEG2/MPEG4/H.264

1200(DTV);99(ATV)

（THD 7%）

High-Definition Multimedia Interface (HDMI) x 3Composite Video Input x 1Audio Input x 1

YCb (Pb )Cr (Pr) x 1

tal definition（TV line） Composite Video input >=350

Y Cb(Pb ) Cr(Pr) >=400

USB x 2

RF x 1

TF x 1

LAN x 1

Headphone Output x 1

COAXIAL Output x 1

120W

AC 100-240V 50/60Hz

2x10W

50"

① Used as Television, display terminal, PC display；

② High luminance, wide viewing angle；

③ Can store 1200 DTV programs；

④ HDMI interface；

5 Multi-Media player (USB);

150W

55"

198W

65"

The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,Inc. in the United States and other countries.

BASE STAND ASSEMBLY

-5-

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

M4X14MM

2. Lock screws below and check each screw is firmly tightened.

1. Place the TV with the display side down on a flat surface. Use a cloth to protect thedisplay. Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.

wall

wall

WALL MOUNT INSTALLATION

-6-

Step One: Use the expansion bolts( ) to fix the wall mount brackets into the wall.4*36PWA

Step Two: Fix the wall mount screws into the rear side of the LCD TV,using the tongue of

(M6x12mm/4pcs) 8kgf.cm.

* The TV appearance subject to material object.

Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.

Warning: the angle between the TV and wall must not be bigger than 3º.

-7-

INSTALLATION

Front panel

REAR AV Connections

All the terminals are(from left to right):LAN, HEADPHONE OUTPUT, VGA, PC AUDIO, HDMI1, HDMI2(ARC), HDMI3,RF.

1: Remote control sensor.

2: Indicator LED: STANDBY.

3: Key board

RED

All the terminals are(from left to right):VIDEO,YPbPr, AUDIO INPUT, COAXIAL OUTPUT, TF, USB.Note: VIDEO and YPbPr share one audio channel.

1. Middle Button: press longtime for “power” function;

2. Up/Down: CH+/-

3. Left/Righ: VOL-/+

press once for “source” function

The keyboard is located at the bottom left near the right side of signal indicator.

KEYBOARD

Rocker

10E

APPSTORE

32

1

≤8m

Bottom

HEADPHONELAN HDMI1 RFHDMI2(ARC) HDMI3VGA PC AUDIO

USB

USBTFPb PrVIDEO/Y L R COAXIAL

INSTALLATION

-8-

Note:Aerial connections: IEC(female).Input impendance: 75 unbalanced.

ANTENNA

STEPS:

Be sure both the TV and computer are Power off.

1.Connect VGA and audio cable2.Connect power cord3.Power on the TV, switch to PC mode4.Power on the PCThis sequence is very important.

PC

HEADPHONELAN HDMI1 RFHDMI2(ARC) HDMI3VGA PC AUDIO

INSTALLATION

-9-

PRESET MODE (HDMI)

1

2

3

800*600

1024*768

60

60

37.88

48.36

RESOLUTION V.Freq.(Hz) H.Freq.(KHz)

1360*768 60 47.7

4 1280*768 60 47.3

5 1920*1080 60 67.5

6

7

3840*2160

3840*2160

60

60

67.5

112.5

PRESET MODE (PC)

1

2

3

800*600

1024*768

60

60

37.88

48.36

RESOLUTION V.Freq.(Hz) H.Freq.(KHz)

1360*768 60 47.7

4 1280*768 60 47.3

5 1920*1080 60 67.5

6

7

3840*2160

3840*2160

60

60

67.5

112.5

INSTALLATION

This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows.

AV EQUIPMENT

-10-

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc...YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.

Note: 1. share one audio channel. 2.Sometimes it will not support in different device because the device supplys nonstandard signal.

VIDEO, YPbPr

G B R

VIDEO EQUIPMENT with YPbPr

G B R W R

W R

W R

W R

TO AUDIO OUTPUTS

VIDEO EQUIPMENT

TO VIDEOOUTPUTS

Y

Y

HDMI

1WAN 2 3 4

Red (audio R)

White(audio L)

Red(Pr or Cr)

R

W

R

Blue(Pb or Cb)

Green(Y)

B

G

Yellow (video)Y

HEADPHONELAN HDMI1 RFHDMI2(ARC) HDMI3VGA PC AUDIO

USB

USBTFPb PrVIDEO/Y L R COAXIAL

REMOTE CONTROLLER

-11-

Press to open Menu App Page.

Press to open the Home Page.

Press to open the application store.

Press to turn the TV on or off.(Power)

S.MODE Press to select the sound mode.

P.MODE Press to select the picture mode.

0-9 Press to enter a channel numberor password.

Q.VIEW Press to switch to the last viewedchannel.

Press to open the on-screen menu. In teletext mode, press to open the INDEX page.

Press to navigate the on-screen menu.

Press to confirm a selection.OK

Press to return to the previous screen.In teletext mode,press to enter mix mode.

SOURCE Press to open the input source list.

CH Press to change the channel.

Press to display the channel information.In teletext mode,press to revealthe hidden information.

Press to open the channel list.In teletext mode,press to switch the image to top,bottom or full.

Press to stop multimedia playback, REC& Timeshift mode.

GUIDEPress to display electronic programme guide in TV mode. Press to enter the teletext subpage.

(REC) Press to record the TV program you are watching in DTV mode.

(Mute) Press to turn the sound on or off.

TOOL Press to open the shortcut menu of tool.

VOL +/- Press to adjust the volume level.

APP

Press to open a favorite channel list. In teletext mode, press to hold a page.

(reverse) Press to reverse playback in multimedia & Timeshift mode.

Press to play in multimedia mode & Timeshift mode.(Play)

(forward) Press to fast forward in multimedia & Timeshift mode.

Press to pause in multimedia mode & Timeshift mode.(Pause)

Insert Batteries into the Remote Control

1. Remove the battery cover.2. Inserting the 2 AAA 1.5V batteries making sure the polarity(+ or -) of the batteries matches the polarity marks inside the unit.3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms:Operation is unsteady or erratic. Sometimes the TV set does not functionwith Remote Control Unit.Remark:1) Alkaline Battery Recommeded.2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

Coloured buttons

10E

16

17

18

19

21

22

24

25

20

23

APPSTORE

APP STORE

In the teletext mode,press this key to enter the project or the corresponding page.

Press to open o r close the teletext mode.

-12-

TV OPERATION

FTI

Set your TV when turn on the TV at first time.

Set the network(wire/wifi).

Select the wifi to connect.

Select the contry/ LCN/ Antenna Type/ Search Type to start auto tuning.

Have a good time watching the TV .

-13-

TV OPERATION

Main Menu

The Main Menu UI are as follow.Press ▼ /▲/◀ /▶ to select the menu.

Network

Press ▼ /▲/◀/▶ to select the APP Center to select the APPS.

Press ▼ /▲/◀/▶to select the APPS.

System Settingelect the Setting in the Main Menu to enter the System Setting.S

Wireless NetworkSelect the WIFI ,and press the passwork to connect.

Wired networkInsert the Ethernet cable ,and select Auto get IP address to connect the Ethernet.

-14-

TV OPERATION

Auto Attach Get the current time and date automatically.

24 Hours Select the 12 hours or 24 hours.

Time Zone Select the local time zone.

Time Edit Edit the current time and date.

Date Format Set current date format.

GeneralPress the to select the General and set the general setting.

◄ / ►

Language Setting Select current display language. Input Method Select the Input method.System Upgrade Upgrade to the newest system version.System Recovery Recovery system to original state.

TimePress the ◀/▶ to select the Time to set.

AboutInformation about the TV.

-15-

TV OPERATION

MediaMultimediaPress the Input to select Media source.

Select the Video, and OK button to enter.

Audio Track Change the audio track.

Select Subtitle Select On/OFF the subtitle.

Region Language Select the language.

Encoding Standard

Play Mode Select the play mode.

Aspect Ratio Select 16:9/4:3.

Select the encoding standard.

MusicPress the button to select the Music. ◄ / ►

PhotoPress the button to select the Photo. ◄ / ►

FolderPress the button to select the Folder. ◄ / ►

Input Source

Press the / button to select.(Available：TV、AV、YPBPR、HDMI1、HDMI2、HDMI3)

▼ ▲

Press INPUT button to enter input source

TV OPERATION

-16-

TV OPERATION

Sound Mode Standard/Music/Movie/Sports/User(Only in this mode, Treble and Bass can be adjusted.)Bass Adjust the low frequency sounds.Treble Adjust the high frequency sounds.Balance Adjust the level of sound coming from the left and right speakers.AVC Press L/R to set or cancel. When set on, it will level out the sound being heard when sudden changes in volume occur during commercial breaks or channel changes.

Select Back Adjust

Hue Adjust the hue(Red,Green,Blue) of the picture. Noise Reduction (Off/Low/Middle/High) You can clear up the input signal by set the item.Color Temp

Select the color temperature that you feel comfortable.

Cool Gives white colors a blue tint.

Medium Gives white colors a neutral tint.

Warm Gives white colors a red tint.Aspect Ratio Select the suitable aspect Ration. (4:3/16:9/Zoom1/Zoom2)

DLC Select ON/OFF.

SoundPress the ◄ ►/ to select sound.

Press Enter button to enter the sub-title, and press ◄ ►/to sdjust.

Press the to set the picture.◄ / ►

Contrast: Adjust the white level of the picture.

Picture Mode:Highlight the item and Press ENTER to enter the sub-menu, that shows the picture mode you can choose: Standard/Dynamic/Mild/User.

Brightness:Adjust darkness of black sections in the picture. Color: Adjust the color intensity of the picture. Sharpness:

Object edges are enhanced for picture detail.

TV

TV Setting

Press the MENU button to enter the TV Setting.Picture

TV OPERATION

-17-

TV OPERATION

Channel Set the channel number.

Color system Select the color system. (PAL/SECAM/NTSC)

Sound System Select the sound system. (DK/BG/I)

Frequency Input the frequency of the channel.

Press to delete the channel.

Press to enter the rename state, then select the word you want to change, and ▼/▲ /◄ ► to select word./

Press to skip the select channel.(Your TV set will skip the channel automatically when using CH+/- to view the channels.)

Press the to select Channel List.◄ ►/

Press to Edit the Channel List.

Auto Scan

Press▼/▲ to select Auto Tuning, then press OK to start auto search.If you want to stop searching, press EXIT to stop searching.

Auto Scan will search for available channels and programreceivable channels.

Channelress P / to select Channel.◄ ►

Press Enter button to enter the sub-title, and press

◄ ►/ to sdjust.

Antenna Type Select the Antenna Type(Air/Cable).

Auto Scan Searching the programs automatically.

Anolog Manual Scan Searching the ATV programs by input

the frequency.

Digital Manual Scan Searching the DTV programs by input

the frequency.

Channel List List the programs.

Preferences Set your preference about audio.

SPDIF Select to ON/OFF Digital Interface.Surround Select to ON/OFF Surround.

TV OPERATION TV OPERATION

-18-

Lockress P / to select Lock.◄ ►

Press Enter button and input the password(the default

password is 0000) to enter the sub-title, and press

◄ ►/ to sdjust.

System Lock Select On/ Off Lock System.

Change Password Select change/keep password.

Parental Control Select On/ Off Parental Control to

select the number of age, which is suitable for your children.

Timeress P / to select Time.◄ ►

Hearing Impaired

AUDIO DESCRIPTION

Set On/ Off.

Set On/ Off.

Audio Language Select the language of audio.

Subtitle Language Select the language of subtitle.

TV OPERATION

-19-

TV OPERATION

Settingress P / to select Setting.◄ ►

Press Enter button to enter the sub-title, and press

◄ ►/ to sdjust.

Blue Screen Set the background color to blue or black when no input signal.PVR SettingSet the PVR function.TeletextSet the Teletext.HDMI CEC SetupSet the CEC ON/OFF.ResetRecall the default setting.

PVR Setting

P ▼ ▲ PVR Setting.ress / to select

PVR USB Selector Select the USB device to recode the program.Record List List the programs have recorded.

H

P ▼ ▲ HDMI CEC Setup.

DMI CEC Setup

ress / to select

Reset

ress / to reset the default setting .P ▼ ▲

OSD TimerSelect OSD Timer / to adjust.

Available OFF, 5sec, 15sec, 30secSleep TimerSelect Sleep Timer / to adjust.

Available , min, min, min, min,

min, min,

,and◄ ►

( : )

,and◄ ►

( :OFF 15 30 45 60

90 120 240min).

Press Enter button to enter the sub-title, and press

◄ ►/ to sdjust.

Picture Audio

Snow Noise antenna position, direction or connection

Inspection

Interfere Noise electronic equipment,car/motorcycle,fluorescent light

Normal Picture Mute

Volume(inspect wether the mute function on the remote control are started , or audio system are correct or not)

No picture Mute

Power cord is not insertedPower switch is not openedContrast and brightness/volume setupPress standby key on the remote control for inspecting

No color Normal audio color control

Scramble Normal audio or weak

retune channel

No color Noise Audio system

Special Explanation：The accessories such as remote control is not belongs to the guarantee。

Normal audio antenna position, direction or connection

Trouble phenomenon

Ghost

-20-

TROUBLE SHOOTING

4032Q506143