Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
LED-
POWER SUPPLY
ModelOutput
Voltage*Output
Current*
LT10-12/1000-UP1 8 – 12 VDC 0 – 1000 mA
LT10-24/500-UP1 8 – 24 VDC 0 – 500 mA
LT10-36/350-UP1 8 – 37 VDC 0 – 350 mA
LT10-36/300-UP1 8 – 37 VDC 0 – 300 mA
LT20-24/850-UP1 12 – 24 VDC 0 – 850 mA
LT20-31/700-UP1 15 – 31 VDC 0 – 700 mA
LT20-36/600-UP1 15 – 37 VDC 0 – 600 mA
1 without DIMMbox-Connection
LT UP
ModelOutput
Voltage*Output
Current*
LT06-12/450-SN 12 VDC 450 mA
LT18-24/750-SN 24 VDC 750 mA
LT SN
ModelOutput
Voltage*Output
Current*
LT10-12/7001 1 – 12 VDC 3 – 700 mA
LT10-16/7001 1 – 16 VDC 3 – 700 mA
LT10-24/5501 1 – 24 VDC 3 – 550 mA
LT10-32/3501 2 – 32 VDC 3 – 350 mA
LT10-32/350-DB 8 – 32 VDC 3 – 350 mA
LT10-36/3001 8 – 37 VDC 0 – 300 mA
1 without DIMMbox-Connection
LT 10
10 / 20 Watt series
06 / 18 Watt series
10 Watt series
Application
• LED Lights
Characteristics
• Voltage and current regulation
in a single unit
• Low profile: 21 x 30 mm, small size
• Continuous short circuit protection
• Overload protection
• Over-temperature protection
• Various mounting options:
Screws, cable ties, ...
• Dimming via DALI, 1-10 V or Switch
dimming by external DIMMbox
• Degree of protection:
IP20, IP67 (LT-UP)
Technical data
Input voltage 220 to 240 VAC
100 to 120 VAC (-SN version)
Input current 150 mA (LT 10 UP), 200 mA (LT 20 UP),
150 mA (LT 06), 400 mA (LT 18),
90 mA (LT 10)
Frequency 50 to 60 Hz
Efficiency up to 91% typ. at maximum load
EMC complies with EN 55012, EN 61000-3-2,
EN 62384, EN 61547
Tolerance of output voltage ± 2%
Environmental conditions
Operating temperature -20° to +45°C at maximum load
Storage temperature -40° to +70°C
Humidity 5% to 90% non-condensing
Overvoltage protection complies with IEC 61000
safety standard
Safety Standards
Norms fulfil Class II according to the following
standards: EN / IEC 61437-1,
EN / IEC 61347-2-13
Lifetime
MTBF 200,000 hours at maximum load
and ambient temperature of + 25° C
(According to MIL-HDBK-217)
Mechanical Data
Weight 90 g (LT 10 UP), 125 g (LT 20 UP),
105g (LT 06), 170g (LT 18), 50 g (LT 10)
Connector Terminal block 0,5..1,5mm²
LT Cap
LED Converter
LT Cap for LT 10, LT 20,
LT 40, LT 60, LT 100
and DIMMbox
LT SQ Cap for LT 40 SQ,
LT 60 SQ
LT Cap Slim for LT 10, LT 20,
LT 40, LT 60, LT 100
and DIMMbox
LT Cap Short Slim for LT 10, LT 20,
LT 40, LT 60, LT 100
and DIMMbox
Accessories
* Units are delivered with the highest specified voltage and current values.
All products meet the standards EN61347-1 and EN61347-2-13
LT10 UP LT20 UP
112
3021
12,1
120
57±0,3
65±0
,568±0
,528±0
,3
52±0
,2
85±0,2
39,5±0
,5
ModelOutput
Voltage*Output
Current*
LT20-24/833 15 – 24 VDC 0 – 833 mA
LT20-28/700 5 – 28 VDC 350 – 700 mA
LT20-28/700/1-10V 5 – 28 VDC 350 – 700 mA
LT20-36/600 15 – 37 VDC 0 – 600 mA
LT20-40/450 15 – 40 VDC 0 – 450 mA
LT20-40/500 10 – 40 VDC 200 – 500 mA
LT20-40/500/1-10V 10 – 40 VDC 200 – 500 mA
LT20-48/200 15 – 48 VDC 0 – 200 mA
LT20-48/350 15 – 48 VDC 100 – 350 mA
LT20-48/417 15 – 48 VDC 0 – 417 mA
LT20-48/350/1-10V 15 – 48 VDC 100 – 350 mA
LT 20
ModelOutput
Voltage*Output
Current*
LT40-24/1400 10 – 24 VDC 700 – 1.400 mA
LT40-24/1400/1-10V 10 – 24 VDC 700 – 1.400 mA
LT40-24/1460 10 – 24 VDC 700 – 1460 mA
LT40-27/1150 17 – 27 VDC 0 – 1150 mA
LT40-36/900 15 – 36 VDC 0 – 900 mA
LT40-36/1050 15 – 37 VDC 500 – 1050 mA
LT40-36/1050/1-10V 15 – 36 VDC 500 – 1050 mA
LT40-48/700 22 – 48 VDC 350 – 700 mA
LT40-48/700/1–10 V 22 – 47 VDC 0 – 700 mA
LT 40
Application
• LED Lights
Characteristics
• Voltage and current regulation
in a single unit
• Low profile:
21 x 30 mm (LT 10 – LT 60)
• Active PFC starting LT 40
• Continuous short circuit protection
• Overload protection
• Over-temperature protection
• Various mounting options:
Screws, cable ties, ...
• Dimming via DALI, 1-10 V or
Switch dimming by external
DIMMbox
• Degree of protection:
IP20, IP67 (LT 40 WP)
Technical data
Input voltage 220 to 240 VAC
100 to 120 VAC (-US version)
100 to 240 VAC (-WR version)
Input current 200 mA (LT 20), 180 mA (LT 40),
180 mA (LT 40 WP), 180 mA (LT 40 SQ)
Frequency 50 to 60 Hz
Efficiency up to zu 91% typ. at maximum load
EMC complies with EN 55012, EN 61000-3-2,
EN 62384, EN 61547
Tolerance of output voltage ± 2%
Environmental conditions
Operating temperature -20° to +45° C at maximum load
Storage temperature -40° to +70° C
Humidity 5% to 90% non-condensing
Overvoltage protection complies with IEC 61000
safety standard
Safety Standards
Norms fulfil Class II according to the
following standards: EN / IEC 61437-1,
EN / IEC 61347-2-13
Lifetime
MTBF 200,000 hours at maximum load
and ambient temperature of + 25° C
(According to MIL-HDBK-217)
Mechanical Data
Weight 82 g (LT 20), 106 g (LT 40),
200 g (LT 40 WP), 125 g (LT 40 SQ)
Connector Terminal block 0,5..1,5mm²
ModelOutput
Voltage*Output
Current*
LT40-24/1400-WP1 10 – 24 VDC 700 – 1400 mA
LT40-36/1050-WP1 15 – 36 VDC 500 – 1050 mA
LT40-48/700-WP1 22 – 48 VDC 350 – 700 mA1 Without DIMMbox-Connection
LT 40 WP
20 Watt series
40 Watt series
40 Watt series
ModelOutput
Voltage*Output
Current*
LT40-24/1400-SQ 10 – 24 VDC 700 – 1400 mA1
LT40-36/1050-SQ 15 – 36 VDC 500 – 1050 mA1
LT40-48/700-SQ 22 – 48 VDC 350 – 700 mA1
LT 40 SQ 40 Watt series
* Units are delivered with the highest specified voltage and current values.
SYST
EMPA
RTN
ER
153145
3012
,121
188180
21 12,1
30
3,6
190200
30
21
90100
5060
21
ModelOutput
Voltage*Output
Current*
LT100-24/4200 15 – 24 VDC 0 – 4200 mA
LT100-36/2800 22 – 36 VDC 0 – 2800 mA
LT100-48/2100 30 – 48 VDC 0 – 2100 mA
LT100-142/700/1-10V 100 – 142 VDC 0 – 700 mA
LT100-285/350/1-10V 190 – 285 VDC 0 – 350 mA
LT100-330/300** 230 – 330 VDC 0 – 300 mA
ModelOutput
Voltage*Output
Current*
LT60-24/2500 15 – 24 VDC 0 – 2500 mA
LT60-36/1200 22 – 37 VDC 0 – 1200 mA
LT60-36/1500 22 – 37 VDC 0 – 1500 mA
LT60-36/1600 22 – 36 VDC 0 – 1600 mA
LT60-48/1200 30 – 48 VDC 0 – 1200 mA
LT60-24/2500-WR/1-10V 24 VDC 0 – 2500 mA1
LT60-85/700/1-10V 40 – 85 VDC 0 – 700 mA
LT60-170/350/1-10V 100 – 170 VDC 0 – 350 mA
1 Wide input range 100 - 240VAC, LT100 housing
LT 60
ModelOutput
Voltage*Output
Current*
LT60-24/2500-SQ 15 – 24 VDC 0 – 2500 mA
LT60-36/1600-SQ 22 – 36 VDC 0 – 1600 mA
LT60-36/1500-SQ 22 – 37 VDC 0 – 1500 mA
LT60-36/1200-SQ 22 – 37 VDC 0 – 1200 mA
LT60-36/1500-SQ-US 22 – 37 VDC 0 – 1500 mA
LT60-36/1200-SQ-US 22 – 37 VDC 0 – 1200 mA
LT60-48/1200-SQ 30 – 48 VDC 0 – 1200 mA
LT 60 SQ
ModelOutput
Voltage*Output
Current*
LT60-42/1400-DPA 18 – 42 VDC 350 – 1400 mA
Adjustable output currents by customer including DALI, Push dimming and 1-10 V.
LT 60 DPA
LT 100
60 Watt series
60 Watt series
60 Watt series
100 Watt series
Characteristics
• Voltage and current regulation
in a single unit
• Low profile:
21 x 30 mm (LT 10 – LT 60),
24 x 30 mm (LT 100)
• Active PFC starting LT 40
• Continuous short circuit
protection
• Overload protection
• Over-temperature protection
• Various mounting options:
Screws, cable ties, ...
• Dimming via DALI, 1-10 V or
Switch dimming by external
DIMMbox Degree of protection:
IP20
Technical data
Input voltage 220 to 240 VAC
100 to 120 VAC (-US version)
100 to 240 VAC (-WR version)
Input current 300 mA (LT 60), 450 mA (LT60 SQ),
300 to 325 mA (LT 60 DPA),
480 mA (LT 100)
Frequency 50 to 60 Hz
Efficiency to zu 91% typ. at maximum load
EMC complies with EN 55012, EN 61000-3-2,
EN 62384, EN 61547
Tolerance of output voltage ± 2%
Environmental conditions
Operating temperature -20° to +45°C at maximum load
Storage temperature -40° to +70°C
Humidity 5% to 90% non-condensing
Overvoltage protection complies with IEC 61000 safety
standard
Safety Standards
Norms fulfil Class II according to the
following standards: EN / IEC 61437-1,
EN / IEC 61347-2-13
Lifetime
MTBF 200,000 hours at maximum load
and ambient temperature of + 25° C
(According to MIL-HDBK-217)
Mechanical Data
Weight 150g (LT 60 SQ), 392 g (LT 60 DPA),
185 g (LT 100)
Connector Terminal block 0,5..1,5mm²
Application
• LED Lights
LT 100
* Units are delivered with the highest specified voltage and current values. ** In preparation
100
Made in Germany
6050
130120
232240
30
2112
,1
305297
30
24 2112
,1
170
30
Application
• LED Lights
Characteristics
• Dimming via DALI,
1–10 V, WLAN
Push-Dimm oder PWM
• For voltage and current
regulation at LT series with CTRL
• Low profile: 21 x 30 mm
• Various mounting options:
Screws, cable ties, ...
• Degree of protection: IP20
Technical data
Input voltage 15 to 50 VDC (DIMMbox),
12 to 42 VDC (DIMMbox WLAN)
Input current 0 to 5 A (DIMMbox),
0 to 12 A (DIMMbox WLAN)
Frequency 50 to 60 Hz
Efficiency up to zu 91% typ. at maximum load
EMC complies with EN 55012, EN 61000-3-2,
EN 62384, EN 61547
Tolerance of output voltage ± 2%
Environmental conditions
Operating temperature -20° to +45° C at maximum load
Storage temperature -40° to +70° C
Humidity 5% to 90% non-condensing
Overvoltage protection complies with IEC 61000 safety
standard
Safety Standards
Norms fulfil Class II according to the
following standards: EN / IEC 61437-1,
EN / IEC 61347-2-13
Lifetime
MTBF 200,000 hours at maximum load
and ambient temperature of + 25° C
(According to MIL-HDBK-217)
Mechanical Data
Weight 57 g (DIMMbox), 61 g (LS 12),
35g (SOPN-Sensorboard)
Connector Terminal block 0,5..1,5mm²
ModelOutput
Voltage*Output
Current*
DIMMbox 15 – 50 VDC 5.000 mA
DIMMbox 1-10 AUS 15 – 50 VDC 5.000 mA
DIMMbox CV max. 48 VDC 5.000 mA
Function Description:At the input of the DIMMbox is a power supply / LED Driver connected, powering the DIMMbox and the connected LEDs. The brightness control is based by a pulse width modulation (PWM) at LED output connector. The switching frequency is 600 Hz. DIMMbox-CV is only provided for constant voltage operation.
DIMMbox
ModelOutput
Voltage*Output
Current*
DIMMbox-WLAN 12 - 42 VDC 3 x 4000 mA
Function Description:The DIMMbox-WLAN can be controlled via a wireless con-nection (WLAN). Three LED output lines can be separately toggled on or off. Also separate light brightness control is possible per channel.
DIMMbox WLAN DIMMbox
DIMMbox
ModelOutput
Voltage*Output
Current*
LS12/100-DPA 13 ± 1 VDC 100 mA
LS12/100-A 13 ± 1 VDC 100 mA
Function Description:The lighting control is a converter of light control signals. The output interface is an advanced 1-10V interface. As control inputs you can use DALI, PUSHDIMM, a PWM signal or 1-10V analog dim voltage. In the version LS12 / 100-A (just low cost analog input) the control inputs DALI and PUSHDIMM are not available. The output interface is tuned to work with Friwo LED driver with integrated 1-10V interface. Additional feature is to control up to 100 LED drivers with only one light control unit (LS12).
LS 12 Light-control-unit
ModelInput
VoltageOutput Signal
SOPN-Sensorboard 12 – 24 VDC
PWM (1kHz;
0V =low /5V=high)
Function Description: The sensor module continuously measures the illumination of the area. This result is a mix of the light from the LED lighting and the natural daylight. Changes based on the natural daylight reflect automatically in a adaption of the LED illumination to bring the light on a preset value to cre-ate an constant illumination at the surface. The senor board switches off automatically if the natural daylight reaches the preset value or will not switch on. Presence detection is based on an intereated motion sensor.
SOPN-Sensorboard Sensorboard
* Units are delivered with the highest specified voltage and current values.
SYST
EMPA
RTN
ER
Made in Germany
2112
,130
145
153
2112
,130
145
153
2112
,130
145
153
5949,8
40,6 - 0,2
12,5312,53
1,35
13,7
16,4
±0,
1
42
Ø 5
Ø 10
Ø 3,
2
15,6
3
8,6
12,6
2
Rev. 2.0
POWER SUPPLY
HeadquarterGewerbegebiet Ost 7 D-91085 WeisendorfTel. +49 9135 73666-0 Fax +49 9135 73666-60 [email protected]
Opto Competence CentreBeimoorkamp 3D-22926 AhrensburgTel. +49 4102 66601-0 Fax +49 4102 66601-66 [email protected]