LED Products for street, industrial and large areas lightingniteko.com/wp-content/uploads/2015/02/ELEVA... · Niteko achieved the GOST R certification for Russian market on all LED

LED Products for street,industrial and large areas lighting

ELEVA CATALOGUE

EL

EVA CATALOGUE

06 ȧ 2014

www.niteko.com Pag. 1Eleva - 06/2014 - V. 2

EL

EVA CATALOGUE

06 ȧ 2014

LED Products for street,industrial and large areas lighting

Street Tunnels Urban Photovoltaic Industrial Large AreasStreet CommercialSports Architectural

International MarketIn the international market Niteko has been a big player in the realization of several projects with foreign partners in:

Austria, France, Spain, Czech Republic, Slovakia, Poland, Romania, Sweden, Chile, Algeria, Mexico, Brazil, Saudi Arabia and Qatar.

Since 2013, the company promoted the internationali-zation process expanding its market horizons and obtaining the PCP (Product Conformity Program) certifi-cation (known before as SASO), which guarantees that the products are compliant to local and national regula-tions and technical requirements of Saudi Arabia.

Niteko achieved the GOST R certification for Russian market on all LED devices and has lately started a certifi-cation process in Czech Republic and Slovakia.All products under the brand Habita are certified accor-ding to the RoHS regulation.

Niteko Srl is an italian Company settled in Montemesola (TA), designing and producing Solid-state lamps with LED technology.

The company offers LED Fixtures for Street, industrial and large areas lighting Made in Italy, identified with “Eleva” brand and commercializes high efficiency products for indoor solutions and commercial spaces with “Habita” brand.

To this day Niteko has achieved great rewards and is listed on a special section among innovative Start-up enterprises on Taranto (Italy) Chamber of Commerce with nr. PRA/3951/2013.After few years from its birth the company is already recognized on the market as a Smart and young Society.

Niteko.Enjoy the light

&RPSDQ\�3URˉOH

PCPKSA

Pro

duct

Conformity Program

Main interest areas��D^R]]��^VUZf^�R_U�SZX�V_eVcacZdVd��AfS]ZT�RU^Z_ZdecReZ`_d��AfS]ZT� ]ZXYeZ_X�>R_RXVc�R_U�V_VcXj�dVcgZTVd�4`âR_ZVd�(ESCO)��D^R]]��>VUZf^�R_U�3ZX�UZdecZSfeZ`_��36>D��3fZ]UZ_X�6_VcXj�>R_RXV^V_e�DjdeV^�

Eleva - 06/2014 - V. 2www.niteko.comPag. 2

Eleva & Indoor.A matter of style! Eleva & Indoor are the two big brands representing Niteko LED Fixtures.

Eleva series identifies high performance LED fixtures for outdoor lighting. Eleva means greatness, elevation and excellence and increase the value of the industrial space or street where the Fixture is placed.

Indoor represents a series of indoor and commercial spaces LED lighting systems that meets the requirements of lighting in spaces to live day by day. The series is suitable for a modern and essential building style.

Niteko product range is able to meet the needs of the market: good quality at competitive prices.

&RPSDQ\�3URˉOH

NitekoMade in Italy reliability

Innovative Design and Excellent Manufacture are the key words of Italian Brand. MADE IN ITALY means also reliability and versatility of a company able to supply not just products but high value services as:

Design and production on demand:Thanks to a staff of Expert Designers and a good Production Capacity, company can realize Projects and Products on Demand based on customer requirements.

Reconversion of existing products into led technology:To meet the technological Modernization Need of traditional products (EX. Old Town Centers). Thanks to the “urban kit” is possible to use the existing fixture and change only the technology inside.

Pre and post-sales services:Niteko technical and business consultants are available to provide answers in short time for each customer request.

Quality:The company gained the Certifications with IQNet, the largest world's network in the certification field of management systems for quality, environment, safety and social responsibility.

Researchers experience:Working on 'LED lighting since 2002.

Finsea Srl, is an Holding group leader of a pool of companies operating in the fields of environment, energy, energy saving and technological innovation. The Group companies have a global turnover around 40.000,000,00 Euro and a total workforce about 370 employees.

Niteko company is Partner:


&RPSDQ\�3URˉOH

Better Lighting Energy Saving

Why LED

ENERGY EFFICIENCY100% light output when switched on.Luminous Efficiency is higher if compared to traditional technologies (Mercury Steam high-pressure Sourcesand metal halide Steam Sources).

ENERGY SAVINGThe use of LED Lamps can save up to 80% on Energy Costs.

COST SAVINGLife service is three times higher than traditional energy-sa-ving lamps (15.000 hours).The life Cycle of a LED reaches 80.000 hours, that means about 9 years of continuous operation (24 hours Per Day).

NO MAINTENANCEBenefit of LED long life results in a reduction on Maintenance Costs.

TOXIC FREEToxic and harmful Free (Gas, Mercury Steam).

ECO FRIENDLYBuilt with recyclable materials. LED parts can be easily disassembled and recycled.

OTHER PLUS2U[fdeRS]V�3cZXYe_Vdd��=`h�9VRe�AcÙfTeZ`_��4`âRTe�DZkV��5fcRSZ]Zej�R_U�cVdZdeR_TV�e`�^VTYR_ZTR]�DecVdd�

Applications


Niteko applications

Street Tunnels

8UDQR��ȧ��)XWXUD��ȧ��*XLGD

Urano

8UDQR��ȧ��)XWXUD��ȧ��*XLGD��ȧ��=HQLWK��ȧ��9LFWRULD��ȧ��8UEDQ�.LW�

8UDQR��ȧ��)XWXUD��ȧ��*XLGD�

8UDQR��ȧ��+DOOH\

8UDQR��ȧ��+DOOH\�

8UDQR��ȧ��+DOOH\

8UDQR�ȧ�+DOOH\

Urano

Street

7XQQHOV

Photovoltaic

,QGXVWULDO

Large areas

Urban

Sports

$HUFKLWHFWXUDO

Commercial

Photovoltaic Industrial

CommercialSports

Urban

Large areas

Architectural

*XLGD

Pag. 30

8UEDQ�.LW

Pag. 44

8UDQR�5*%

Pag. 14

Urano

Pag. 8

Halley

Pag. 18

)XWXUD

Pag. 24

Victoria

Pag. 40

=HQLWK

Pag. 36

Resorsces

Index

6\PERO�*XLGHOLQHV�

Remote control

Overvoltage

Norms

*HQHUDO�VDOH�FRQGLWLRQV

Warranty

Pag. 48

Pag. 49

Pag. 56

Pag. 57

Pag. 62

Pag. 64



Urano

Street Tunnels Urban Photovoltaic Industrial Large AreasStreet CommercialSports Architectural


The right support for you

Made in Italy

GHOST - R

Urano

Urano


7�9�6�'�&HUWLˉFDWLRQ��8QLYHUVDOO\�UHFRJQL]HG�DV�WKH�PRVW�EUDQG��RI�UHOLDELOLW\�RI�3URGXFWV�FRPSOLDQW�ZLWK�LQWHUQDWLRQDO�UHJXODWRU\�VWDQGDUGV�RQ�VDIHW\��TXDOLW\��HQYLURQPHQW�DQG�WKH�XVH�RI�WR[LF�DQG�GDQJHURXV�VXEVWDQFHV�

8QLYHUVDO�DSSOLFDWLRQ�7KLV�)ORRGOLJKW�LV�XQLYHUVDO�DQG�VXLWDEOH�WR�VHYHUDO�OLJKWLQJ�QHHGV�DQG�UHTXHVWV��HYHU\ZKHUH��WKDQNV�WR�WKH�UHOLDEOH�DQG� UHVLVWDQW� VWUXFWXUH�� WKH� VHYHUDO� DYDLODEOH�RSWLFV� DQG�PRXQWLQJ�SRVVLELOLWLHV� �ZDOO�PRXQWLQJ��&DEOH�7UD\�0RXQWLQJ�IRU�7XQQHO��KHDG�SROH�0RXQWLQJ��H[WHQGHG�&DEOH�0RXQWLQJ��+DQJLQJ�0RXQWLQJ��UHFHV-VHG�0RXQWLQJ��

$WWHQWLRQ�WR�GHWDLOV��7KH�UHVHDUFK�LV�FDUHIXO�IRU�HYHU\�GHWDLO��DV�IRU�WKH�VHFXULQJ�IUDPH��WKH�DQWL�FRQGHQVDWLRQ�YDOYH��WKH�VDIHW\�FDUW�DQG��WKH�DJLQJ�UHVLVWDQW�JDVNHWV��$OO�WKLV�JXDUDQWHHV�WKH�)ORRGOLJKW�WR�NHHS�RQ�WRS�WKH�TXDOLW\�RI�LWV�performance, even after many years.

$EVROXWH�HIˉFLHQF\�7KH�WHPSHUHG�*ODVV�VFUHHQ�RQ�H[WUD�OLJKW�FRORU�DQG�WKH�RSWLFDO�XQLW�HIˉFLHQF\�QRW�OHVV�WKDQ��DOORZ�WR�WDNH�DGYDQWDJH�RI�WKH�PD[LPXP�GLRGHV�EULJKWQHVV�ZLWKRXW�RSWLFDO�REVWDFOHV�

)L[WXUH�FRPSRVLWLRQ�([WUXGHG�$OXPLQXP�ERG\�ZLWK�ZLGH�FRROLQJ�)LQV�ABS Side Caps.

2SWLFDO�XQLW�/('�0RGXOHV�HTXLSSHG�ZLWK�KLJK�SUHFLVLRQ�VHFRQGDU\�FROOLPDWRUV�IRU�OLJKW�EHDP�FRQFHQWUDWLRQ�

/LIH�6SDQ��/��>80.000 h.

9LGHR�VXUYHLOODQFH��RSWLRQDO��RQ�UHTXHVW�LW�LV�SRVVLEOH�WR�HTXLS�WKH�PDFKLQH�ZLWK�EXLOW�LQ�FDPHUD�LQWHUIDFHG�with CCTV systems.

5HPRWH�&RQWURO��RSWLRQDO��OXPLQRXV�ˊX[�6HOI�UHJXODWRU�RQ�GHPDQG��VWDWXV�FKHFN�DQG�FRQVXPSWLRQ�FRQWURO�7R�NQRZ�PRUH�ORRN�DW�WKH�IHDWXUHV�RI�5HPRWH�&RQWURO�

0RXQWLQJ�:DOO��&DEOH�7UD\��7XQQHO��+HDG�3ROH��([WHQGHG�&DEOH��+DQJLQJ��5HFHVVHG�

)RFXV�6WDLQOHVV� VWHHO�ˉ[LQJ�%UDFNHW� IRU�)ORRGOLJKW� � DGMXVWPHQW� WR��r� � � DQG��r� LQFUHDVHV�DYDLODEOH�RQ� VLGH�IUDPHZRUNV��PDGH�RQ�WHFKQR�SRO\PHU�WR�DYRLG�WKH�SKHQRPHQRQ�RI�JDOYDQLF�FRUURVLRQ�LQ�FRXSOLQJ�EHWZHHQ�the two metals.

$SSOLFDWLRQV� 7XQQHOV��,QGXVWULDO�DSSOLFDWLRQV��&RPPHUFLDO�VSDFHV��/DUJH�DUHDV��:DUHKRXVHV��6SRUW�IDFLOLWLHV��3DUNV��*DUGHQV��2OG�WRZQ�FHQWHUV

MAIN FEATURES

ADVANTAGES

URANO

+45°C

-20°C

LEDF

70...794.000 K

220240

IP66 IK080,303

17,0 Kg80.000 h

24V12V125280 3.000 K 5.000 K

Urano


[KU-EM] Emergency Kit available on request: 4 LED - 100mA - 5W - 600 lm - AutonomY 1 h

[KU-12V] Available for photovoltaic application (power supply 12V d.c. ) [KU-24V] Available for photovoltaic application (power supply 24V d.c.)

CHARACTERITICS

� Standard

STANDRD COLOUR

DETAILS

APPLICATIONS

DESIGN

� Optional

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)

[°°]: 00 - 80 - 56 - 30 - 16 - E1 - E2 - E3 - A1 - A3 - R1

[*] = GR (BODY: Anodized Grey / CAPS: RAL 7035) - NE (BODY: Black Satin / CAPS: RAL 7024) - FS (BODY: Smokey Grey Satin / CAPS: RAL 7024)

A`hVc��H��VWWVTeZgV�gR]fV�`W�eYV�WZiefcV��&��7]fi��]^�+�_`^Z_R]�gR]fV��`W�eYV�]ZXYe�d`fcTV�Re�E[.)&�4��&��

F$#9�L<NL��N�[*] 416 112 0,20069 8.000 8 700 4000/5000 70...79 404 8,0

F%)9�L<NL��N�[*] 416 112 0,200104 12.000 12 700 4000/5000 70...79 404 8,0

F'%9�L<NL��N�[*] 416 112 0,200139 16.000 16 700 4000/5000 70...79 404 8,0

F)!9�L<NL��N�[*] 416 112 0,260174 20.000 20 700 4000/5000 70...79 554 15,0

F*'9�L<NL��N�[*] 416 112 0,260208 24.000 24 700 4000/5000 70...79 554 15,0

F"!%9�L<NL��N�[*] 416 112 0,260225 26.000 26 700 4000/5000 70...79 554 15,0

F"#!9�L<NL��N�[*] 416 112 0,303260 30.000 30 700 4000/5000 70...79 754 17,0

F"%%9�L<NL��N�[*] 313 36.000 36 700 4000/5000 70...79 754 416 112 0,303 17,0

F"'9�L<NL��N�[*] 416 112 0,20035 4.000 4 700 4000/5000 70...79 404 8,0

F#%9�L<NL��N�[*] 416 112 0,20052 6.000 6 700 4000/5000 70...79 404 8,0

U32H-WL��N�[*] 416 112 0,20069 7.200 8 700 3000 70...79 404 8,0

U48H-WL��N�[*] 416 112 0,200104 10.800 12 700 3000 70...79 404 8,0

U64H-WL��N�[*] 416 112 0,200139 15.840 16 700 3000 70...79 404 8,0

U80H-WL��N�[*] 416 112 0,260174 18.000 20 700 3000 70...79 554 15,0

U96H-WL��N�[*] 416 112 0,260208 21.600 24 700 3000 70...79 554 15,0

U104H-WL��N�[*] 416 112 0,260225 23.400 26 700 3000 70...79 554 15,0

U120H-WL��N�[*] 416 112 0,303260 27.000 30 700 3000 70...79 754 17,0

U144H-WL��N�[*] 313 32.400 36 700 3000 70...79 754 416 112 0,303 17,0

U16H-WL��N�[*] 416 112 0,20035 3.600 4 700 3000 70...79 404 8,0

U24H-WL��N�[*] 416 112 0,20052 5.400 6 700 3000 70...79 404 8,0

Code b (mm) h (mm) W.Exp. (m²)CCT (K) CRI (Ra)(W) (lm) LED n° (mA) a (mm) (kg)

[KU-GSM] Lighting remote control with GSM technology on ALIGHT platform

SIZE

a

h

b

� Extruded aluminium body

� Lateral caps in ABS

� Tempered glass screen (4 mm)

� Other colors available

on request

� Adjustable stainless steel bracket

� CCT Standard: N (4000K ± 300K)

CCT optional: W (3000K ± 300K)

CCT optional: C (5000K ± 300K)

� Power factor : > 0.97

� CRI (Ra) Standard: 70...79

CRI (Ra) optional: 80...89

�

! >110lm/W

� Lifetime: 80.000 hrs

� LED Driver integrated

� LED quadrichip Cree,

Philips Lumileds

Luminous source efficiency

BODY: Anodized grey CAPS: Grey RAL 7035

� Outdoor sport facilities

� Indoor sport facilities

� Parking areas

� Road and pedestrian tunnels

� Civic and private parks

� Urban and suburban roads

� Architectural and museum

� Large areas and infrastructure

Innovative Design LED Technology Quality Made in Italy

OTHER APPLICATIONS

� Asymmetric

PHOTOMETRY

� Symmetric wide beam

� Symmetric narrow beam

� Elliptic

Urano


C0-C180 C90-C270!�

*!� 240

"&#�i�%'��6==:AE:4�L6$N�

C0-C180 C90-C270!�

*!� 250

""&��– SYMMETRIC [00] 4`_V�UZRXcR^�"$*H��""&�

7.000

9.000

11.000

""#�!�'%

6^�L=fiN�F!

&*�!�')

$'�!�'*

5

7

9

139W

115°

4`_V�UZRXcR^�##&H��""&�

7.000

9.000

11.000

")"�!�'%

6^�L=fiN�F!

*&�!�')

&*�!�'*

5

7

9

225W

115°

4`_V�UZRXcR^�$"$H��""&�

7.000

9.000

11.000

#&"�!�'%

6^�L=fiN�F!

"$#�!�')

)"�!�'*

5

7

9

313W

115°

C0-C180 C90-C270!�

*!� 450

)!��– SYMMETRIC [80]

C0-C180 C90-C270!�

*!� 1.200

&'��– SYMMETRIC [56] "'��– SYMMETRIC [16]

C0-C180 C90-C270!�

*!� 3.000

C0-C180 C90-C270!�

*!� 1.800

$!��– SYMMETRIC [30]

$(�½#"� – ELLIPTIC [E2]

C0-C180 C90-C270!�

*!� 2.300

"!!�½#$� – ELLIPTIC [E1]

C0-C180 C90-C270!�

*!� 1.300

ASYMMETRIC [A1]"$)�½&!� –

C0-C180 C90-C270!�

*!� 300

ASYMMETRIC [A3]"$#�½'!� –

C0-C180 C90-C270!�

*!� 800

"&%��– ROTO-SYMMETRIC [R1]

*!� 240


Urano

MOUNTING ACCESSORIES

� Wall mounting (standard)

� Raceway mounting (tunnel)

� Suspension mounting

� Pole mounting

� Extended cable mounting

� Recessed mounting

� Artistic arm mounting

� Single arm mounting

KM-U-AR

Wall mounting (standard)

KM-U-TES

Extended cable mounting

[GR]

4+�2_ÙZkVU�8cVj��E+�8cVj��C2=�(!$&

[NE]

4+�3]RT\�DReZ_��E+�2_eYcRTZeV�8cVj��C2=�(!#%

[FS]

4+�D^`\Vj�8cVj�DReZ_��E+�2_eYcRTZeV�8cVj�C2=�(!#%

KM-U-INC

Recessed mounting

KM-U-GAL

Raceway mounting (tunnel)

KM-U-SPS

Suspension mounting

KM-U-TP

Pole mounting

KM-U-BAS

Artistic arm mounting

KM-U-TP2

Single arm mounting

7KH�SURWHFWLRQ�YDOYHV�DQG�YHQW�*25(p�3URWHFWLYH�9HQWV�DOORZ�WKH�SURWHFWLRQ�DJDLQVW�LQJUHVV�RI�ZDWHU�DQG�GLUW�WKDQNV�WR�WKH�*RUH�PHPEUDQH��ZKLFK�IRUPV�D�EDUULHU�DJDLQVW�WKH�HQWU\�RI�OLTXLGV�DQG�SRZGHUV5DSLG�DGMXVWPHQW�RI�WKH�SUHVVXUH�LQVLGH�WKH�ˉWWLQJElimination of condensation.

ȧ

ȧȧ

OPTIONAL COLORS

8UDQR�5*%


Street Tunnels Urban Photovoltaic Industrial Large Areas CommercialSports Architectural

Made in Italy

GHOST - R

8UDQR�5*%


The light at the service of the art

8QLYHUVDO�DSSOLFDWLRQ�7KH�VWURQJ�DQG�UHOLDEOH�ˉ[WXUH�VWUXFWXUH��WKH�GLIIHUHQW�OHQVHV�DYDLODEOH�DQG�WKH�PXOWLSOH�PRXQWLQJ�RSWLRQV��ZDOO��UDFHZD\��KHDG�SROH��H[WHQGHG�FDEOH��VXVSHQGHG��UHFHVVHG��PDNHV�WKLV�ˊRRGOLJKW�XQLYHUVDO�DQG�DGDS-WDEOH�WR�GLIIHUHQW�QHHGV�DQG�OLJKWLQJ�UHTXLUHPHQWV�DQ\ZKHUH�

$WWHQWLRQ�WR�GHWDLO� 7KH�UHVHDUFK�LV�FDUHIXO�IRU�HYHU\�GHWDLO��DV�IRU�WKH�VHFXULQJ�IUDPH��WKH�DQWL�FRQGHQVDWLRQ�YDOYH��WKH�VDIHW\�FDUW�DQG��WKH�DJLQJ�UHVLVWDQW�JDVNHWV��$OO�WKLV�JXDUDQWHHV�WKH�)ORRGOLJKW�WR�NHHS�RQ�WRS�WKH�TXDOLW\�RI�LWV�performance, even after many years.

$EVROXWH�5HWXUQ�7KH�WHPSHUHG�JODVV�VFUHHQ�RI�H[WUD�OLJKW�FRORU�DQG�WKH�HIˉFLHQF\�RI�WKH�RSWLFDO�XQLW�RI�QRW�OHVV�WKDQ��DOORZ�\RX�WR�WDNH�IXOO�DGYDQWDJH�DQG�ZLWKRXW�REVWDFOHV�RI�WKH��EULJKWQHVV�RI�WKH�GLRGHV�

)L[WXUH�FRPSRVLWLRQ�([WUXGHG�DOXPLQXP�ERG\�ZLWK�ZLGH�FRROLQJ�ˉQV��Lateral caps in ABS.

2SWLFDO�XQLW�/('�PRGXOHV�HTXLSSHG�ZLWK�KLJK�SUHFLVLRQ�VHFRQGDU\�FROOLPDWRUV�IRU�WKH�FRQFHQWUDWLRQ�RI�WKH�OLJKW�EHDP�

/LIH�6SDQ��/��>60.000 h.

&RQWURO�DQG�UHJXODWLRQ�7KURXJK�WKH�WUDQVPLVVLRQ�SURWRFRO�'0;��LW�LV�SRVVLEOH�WR�DGMXVW�DQG�FRQWURO�WKH�IROORZLQJ�IXQFWLRQV��OLJKW�LQWHQVLW\��FRORU�DQG�VHTXHQFH�RI�FRORUV��ZLWK�GLIIHUHQW�OLJKWLQJ�HIIHFWV��VWUREH��ˊDVK��IDGH��ˉ[HG�FRORUV��VZLWFKLQJ�RQ�DQG�RII��

6WDQGDUG�PRXQWLQJ�6WDLQOHVV�VWHHO�$GMXVWDEOH�EUDFNHWV�RI�IRU�WKH��DGMXVWPHQW�RI�WKH�ˊRRGOLJKW�XS�WR��r�ZLWK�LQFUHDVLQJ�RI��r�FRQWUROODEOH�RQ�ODWHUDO�EUDFNHWV��PDGH�RI�WHFKQRSRO\PHU�WR�DYRLG�JDOYDQLF�FRUURVLRQ�LQ�WKH�FRXSOLQJ�between the two metals.

2WKHU�DSSOLFDWLRQV�ZDOO��UDFHZD\��KHDG�SROH��H[WHQGHG�FDEOH��VXVSHQGHG��UHFHVVHG�PRXQWLQJ��DQG�ZLWK�WKH�RWKHU�DFFHVVRULHV�of Urano series

)RFXV�&DQ�EH�XVHG�ZLWK�YDULRXV�W\SHV�RI�FRQQHFWRUV�DFFRUGLQJ�WR�WKH�LQVWDOODWLRQ�DQG�LPSODQW�UHTXLUHPHQWV��;/5��;/5��5-��

$SSOLFDWLRQV� $UWLVWLF�DQG�GHFRUDWLYH�OLJKWLQJ��IRU��PRQXPHQWV�DQG�PXVHXPV��*JDUGHQV�DQG�FLYLF�SDUNV��&RPPHUFLDO�DUHDV��/RFDO�DQG�WRXULVW�IDFLOLWLHV��3XEOLF�HQWHUWDLQPHQW�

MAIN FEATURES

ADVANTAGES

8UDQR�5*%


C0-C180 C90-C270!�

*!� 1.200

&'��– SYMMETRIC [56] "'��– SYMMETRIC [16]

C0-C180 C90-C270!�

*!� 3.000

C0-C180 C90-C270!�

*!� 1.800

$!��– SYMMETRIC [30]

URANO RGB

CHARACTERITICS

� Standard

Code (W) (lm) LED n° LED type (mA) a (mm) b (mm) h (mm) W.Exp. (m²) (kg)

U12L�C83H�L��N�L�N 60 2.200 12 RGBW 350 475 416 112 0,20 8,0

U12M�C83H�L��N�L�N 86 3.000 12 RGBW 530 475 416 112 0,20 8,0

U12H�C83H�L��N�L�N 127 3.800 12 RGBW 700 475 416 112 0,20 8,0

PHOTOMETRY

0,2008,0 Kg

80.000 h

+45°C

-20°CF220

240IP66 IK08 R B

*

125280

8UDQR�5*%

STANDRD COLOUR

DETAILS

APPLICATIONS

� Symmetric wide beam

� Symmetric narrow beam


SIZE

a

h

b

C0-C180 C90-C270!�

*!� 250

""&��– SYMMETRIC [00]

� Optional

[°°]: 00 - 80 - 56 - 30 - 16

[*]: GR (BODY: Anodized Grey / CAPS: RAL 7035) - NE (BODY: Black Satin / CAPS: RAL 7024) - FS (BODY: Smokey Grey Satin / CAPS: RAL 7024)

Power (W) - effective value of the fixture�L��&�N��7]fi��]^�+�_`^Z_R]�gR]fV��`W�eYV�]ZXYe�d`fcTV�Re�E[.)&�4��&��

C0-C180 C90-C270!�

*!� 450

)!��– SYMMETRIC [80]

� Extruded aluminium body

� Lateral caps in ABS

� Tempered glass screen (4 mm)

� Other colors available

on request

� Adjustable stainless steel bracket

� Power factor : > 0.97



�

! >95lm/W


� LED Driver DMX integrated

� LED quadrichip Cree

multicolor type RGBW


� Outdoor sport facilities


� Parking areas

� Road and pedestrian tunnels

� Civic and private parks

� Urban and suburban roads

� Architectural and museum

� Large areas and infrastructure

BODY: Anodized grey CAPS: Grey RAL 7035

Halley



Made in Italy

GHOST - R

Halley


The best Performanceto your industrial Space

Halley


MAIN FEATURES

)L[WXUH�FRPSRVLWLRQ�*UH\�&RORU�WHFKQR�SRO\PHU�ZLWK�LQQHU�VFUHHQ�RQ��PP�300$�

5HˊHFWRU�$QRGL]HG�DOXPLQLXP��,W�SHUIRUPV�WKH�IXQFWLRQ�RI�RSWLFDO�XQLW�

/LIH�6SDQ��/��>80.000 h.

5HPRWH�&RQWURO��RSWLRQDO�/XPLQRXV�ˊX[�6HOI�UHJXODWRU�RQ�GHPDQG��VWDWXV�FKHFN�DQG�FRQVXPSWLRQ�FRQWURO�7R�NQRZ�PRUH�ORRN�DW�WKH�IHDWXUHV�RI�5HPRWH�&RQWURO�

0RXQWLQJ�(TXLSSHG�ZLWK�KDQJLQJ�KRRN��3RVVLELOLW\�RI�UHFHVVHG�PRXQWLQJ�WKURXJK�D�VSHFLDO�.LW�

)RFXV�The external connector�OHW�EH�SRVVLEOH�WKH�HOHFWULFDO�FRQQHFWLRQ�ZLWKRXW�WKH�QHHG�WR�RSHQ�WKH�XQLW��

$SSOLFDWLRQV� :DUHKRXVHV�DQG�LQGXVWULDO�VSDFHV��&RPPHUFLDO�VSDFHV��/DUJH�DUHDV��6SRUW�IDFLOLWLHV�

ADVANTAGES

7KH�PRVW�DGYDQFHG�/('�7HFKQRORJ\�XQGHU�D�WUDGLWLRQDO�&RYHU�+DOOH\�IROORZV�WKH�VKDSH�RI�WUDGLWLRQDO�LQGXVWULDO�ODPSV�EXW�XVLQJ�DW�WKH�VDPH�WLPH�WKH�PRVW�DGYDQFHG�WHFKQRORJ\�RQ�/('�OLJKWLQJ�LQGXVWU\�7KH�/DPS�ˉWV�SHUIHFWO\�LQVLGH�FRPPHUFLDO�6SDFHV��VSRUWV�)DFLOLWLHV��:DUHKRXVHV�DQG�LQGXVWULDO�6SDFHV�

/XPLQRXV�(IˉFLHQF\�&RPSDUHG�WR�RWKHU�ODPSV�LQ�WKH�VDPH�ˉHOG�XVLQJ�D�VLQJOH�/('�ERG\��&2%��+DOOH\�GLVWULEXWHV�VHYHUDO�/('V�DW�WKH�ULJKW�GLVWDQFH�VR�DV�WR�HQVXUH�WKH�SURWHFWLRQ�IURP�RYHUKHDWLQJ�DQG�WR�JXDUDQWHH�D�ULJKW�GLVWULEXWLRQ�RI�WKH�OLJKW��7KH�VKDSH�DQG�WKH�IHDWXUHV�RI�WKH�UHˊHFWRU�ERG\�HQKDQFH�OXPLQRXV�HIˉFLHQF\�

6LPSO\�6WURQJ�,PSDFW�UHVLVWDQFH�GHJUHH��,.��3URWHFWLRQ��%RG\�UHVLVWDQW�WR�LPSDFW�HQHUJ\��-��IRUQLUHHVHPSLR�GL�HQHUJLDGȠXUWR��-�5HVLVWDQW�WR��DWPRVSKHULF�$JHQWV��DOO�FRPSRQHQWV�DUH�ZDWHUWLJKW�DQG�PRLVWXUHWLJKW

$FWLYH�FRROLQJ�V\VWHP��$&6��0DGH�XS�E\�D�PLFURSURFHVVRU�DEOH�WR�PHDVXUH�WKH�WHPSHUDWXUH�DQG�WR�DFWLYDWH�D�IDQ��DQG�DGMXVW�URWDWLRQ�VSHHG��7KH�IDQ�LQ�FRPELQDWLRQ�ZLWK�WKH�VSHFLDO�GHVLJQ�RI�KHDW�GLVVLSDWLRQ�VWUXFWXUH�JXDUDQWHHV�RSWLPDO�FRROLQJ�)DQ�IHDWXUHV� ORZ�QRLVH��\HDUV�JXDUDQWHH�RQ�FRQWLQXRXV�RSHUDWLRQ��KRXUV�SHU�GD\��KHUPHWLF�DJDLQVW�GLUW\��RQ�UHTXHVW��

(DV\�WR�LQVWDOO�7KH�GHVLJQ�KDV�EHHQ�VWXGLHG�LQ�RUGHU�WR�DOORZ�WR�KDYH�IHZ�HVVHQWLDO�FRPSRQHQWV�WR�DVVHPEOH�DQG�SURYLGH�D�TXLFN�DQG�HDV\�LQVWDOODWLRQ�WR�WKH�ˉQDO�FXVWRPHU�

HALLEY

CHARACTERITICS

� Standard70...794.000 K 10,0 Kg

80.000 h

+45°C

-20°C

LEDF220

240IP65 IK08

IP20125280 3.000 K 5.000 K

Halley

SIZE

(Ø) a

(Ø) a¹

(Ø) a¹

(Ø) a

h

h¹

[KH-EM] Emergency Kit available on request: 4 LED - 100mA - 5W - 600 lm - Autonomy 1 h

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)

L��N+�*!��!!��hZeY`fe�cVW]VTe`c�


Code (W) (lm) LED n° CRI (Ra)CCT (K)(mA) a (mm) a¹ (mm) h (mm) h¹ (mm)

HALLEY�"!9�L<NL��N�8C 86 10.000 10 70...794000/5000700 Ø 482 Ø 323 418 210 8,0

HALLEY-16H-[K]L��N-GR 135 16.000 16 70...794000/5000700 Ø 482 Ø 323 418 210 8,5

HALLEY-22H-[K]L��N-GR 188 22.000 22 70...794000/5000700 Ø 482 Ø 323 418 210 10,0

HALLEY-24X-[K]L��N-GR 250 30.000 24 70...794000/5000850 Ø 482 Ø 323 418 210 11,5

HALLEY�"!9�HL��N�8C 86 9.000 10 70...793000700 Ø 482 Ø 323 418 210 8,0

HALLEY-16H-WL��N-GR 135 14.400 16 70...793000700 Ø 482 Ø 323 418 210 8,5

HALLEY-22H-WL��N-GR 188 19.800 22 70...793000700 Ø 482 Ø 323 418 210 10,0

HALLEY-24X-WL��N-GR 250 27.000 24 70...793000850 Ø 482 Ø 323 418 210 11,5

(kg)

� Optional

DESIGN

APPLICATIONS

� Industrial areas and warehouses

� Commercial areas


DETAILS

� Technopolymer body

�

� Tempered glass optional

� Switch on-off time < 1 s



� Power factor: > 0.95

STANDARD COLOUR

Anodized reflector

� PMMA transparent or frosted

(optional) screen

BODY: Anthracite Grey RAL7024 REF.: Anodized grey


�

! >110lm/W



� Available in IP20 on request

� Active Cooling System

mounted on versions:

135W, 188W e 250W





Philips Lumileds


Rapid connection LED Technology Quality Made in Italy

� Prismatic PMMA rfector

Transparent tempered glass

KH-V/C

Frosted tempered glass

KH-V/S

Frosted PMMA diffuser

KH-D/S

Prismatic PMMA rfector

KH-R/P

Halley


MUNTING ACCESSORIES

� Recessed mounting

PHOTOMETRY

Recessed mounting Kit

KM-H-INC

*!��– SYMMETRIC [90]

C0-C180 C90-C270!�

*!� 500

ENERGY SAVING

� Examples pf comparition

� Version without reflector

� Standard version with reflector

0

75 W

150 W

225 W

300 W

375 W

450 WTraditional 400W

Halley 24X

0

50 W

100 W

150 W

200 W

250 W

300 W

43,2 %

Traditional 250W

Halley 16H

52,6 %Actual

Consumption440 W

ActualConsumption

250 W

ActualConsumption

285 W

ActualConsumption

135 W

P

ower Reduction

P

ower Reduction

This mounting kit is particularly suitable in case of tfalse ceiling.(Example: airport, service station, industrial structures)

C0-C180 C90-C270!�

*!� 250

""&��– SYMMETRIC [00]

4`_V�UZRXcR^�"))H��*!� 4`_V�UZRXcR^�#&!H��*!�4`_V�UZRXcR^�"$&H��*!�

5.000

7.000

9.000

#&!�!�'(

6^�L=fiN�F!

"##�!�')

(#�!�'*

5

7

9

135W

5.000

7.000

9.000

$%%�!�'(

6^�L=fiN�F!

"')�!�')

"!!�!�'*

5

7

9

188W

5.000

7.000

9.000

&"&�!�'(

6^�L=fiN�F!

#&#�!�')

"%*�!�'*

5

7

9

250W

4`_V�UZRXcR^�"))H��""&� 4`_V�UZRXcR^�#&!H��""&�4`_V�UZRXcR^�"$&H��""&�

7.000

9.000

11.000

""#�!�'%

6^�L=fiN�F!

&*�!�')

$'�!�'*

5

7

9

135W

7.000

9.000

11.000

"&%�!�'%

6^�L=fiN�F!

)"�!�')

&!�!�'*

5

7

9

188W

7.000

9.000

11.000

#!*�!�'%

6^�L=fiN�F!

""!�!�')

')�!�'*

5

7

9

250W

""&� ""&� ""&�

ADDITIONAL ACCESSORIES

� Transparent or frosted glass

� PMMA transparent or frosted

(optional) screen

Halley


COMPONENTS

ACS (Active Cooling System)

� Mounted on versions:

135W, 188W e 250W

� ACS grants also longer lifetime

of LED’s and fitting

�

for heat dissipation

Temperature Reading LED

solder point

Microcontroller computing Very low noise fan with

speed regulation

Structure with fissures

)XWXUD



Made in Italy

GHOST - R

PCPKSA

Pro

duct

Conformity Program

)XWXUD


The new LOOK of the Street

)XWXUD


MAIN FEATURES

)L[WXUH�FRPSRVLWLRQ�'LH�FDVW�$OXPLQLXP�VLQJOH�%RG\�ZLWK�ZLGH�FRROLQJ�ˉQV�6HFXULQJ�IUDPH�DQG�$%6�GLVFRQQHFWRU�GRRU�

2SWLFDO�XQLW�Asymmetrical street lens with high precision collimators for light beam concentration.

/LIH�6SDQ��/��>80.000 h.

0RXQWLQJ�2Q�$UP�RU�+HDG��3ROH�ZLWK�ˉ[HG�RU�DGMXVWDEOH�DFFHVVRU\�

)RFXV�%XLOW�LQ�FRPSOLDQFH�ZLWK�WKH�UHJXODWLRQV�DJDLQVW�OLJKW�SROOXWLRQ�

$SSOLFDWLRQV�6WUHHWV��+LJKZD\V��([WUD�XUEDQ�IDVW�URDGV��8UEDQ�URDGV��6TXDUHV��&\FOLQJ�ODQHV��3DUNLQJV

ADVANTAGES

/RQJ�/LIH�6SDQ�7KH�'LH�FDVW�DOXPLQLXP�ERG\��ZLWK�ZLGH�FRROLQJ�)LQV�JXDUDQWHHV�ORQJ�/LIH�6SDQ�WR�'LRGHV��<HDUV�*XDUDQWHH�RQ�DOO�PHWDO�FRPSRQHQWV�

0D[LPXP�(IˉFLHQF\�DQG�5HVLVWDQFH�3RZHU�&RPSDUWPHQW��RSWLFDO�DQG�PHFKDQLFDO�FRPSRQHQWV�DUH�WKHUPDOO\�LQVXODWHG�LQ�RUGHU�WR�LQFUHDVH�/DPS�HIˉFLHQF\�DQG�HVWLPDWHG�/LIH�VSDQ�&RDWLQJ�LV�UHVLVWDQW�WR�FRUURVLRQ��DEUDVLRQ��ˊDNLQJ�DQG�6DOLQH�)RJ��7KHVH�IHDWXUHV�DOORZ�VWUHQJWK�DJDLQVW�DOO�weather conditions.��FRVW�VDYLQJV�WKDQNV�WR�WKH�VRODU�DSSOLFDWLRQ��RSWLRQDO��

1R�PDLQWHQDQFH�7KH�TXDOLW\�RI�HDFK�FRPSRQHQW�XVHG�DQG�WKH�HIˉFLHQF\�RI�WKH�VHOI�FOHDQLQJ�V\VWHP�EULQJ�PDLQWHQDQFH�FRVWV�down.

)DVW�DQG�&RPIRUWDEOH�0DQDJHPHQW�7KDQNV�WR�WKH�UHPRWH�FRQWURO�RU�WKH�OXPLQRXV� X[�6HOI�UHJXODWRU�LV�SRVVLEOH�WR�FKHFN�WKH�VWDWXV�DQG�PRQLWRU�FRQVXPSWLRQ�)RU�PRUH�LQIRUPDWLRQ�VHH�UHPRWH�FRQWURO�IHDWXUHV��

FUTURA

CHARACTERITICS

� Standard

Futura

h

a

b

(Ø) 65 mm

SIZE


Code (W) (lm) n° LED (mA) CRI (Ra)CCT (K) a (mm) b (mm) h (mm) W.Exp. (m²) (Kg)

F52H-W01-AN 109 10.890 9 1000 70...793000 730 288 157 0,074 10,5

F52H-C01-AN 109 13.050 9 1000 70...795000 730 288 157 0,074 10,5

F60H-N01-AN 121 15.980 17 600 70...794000 730 288 157 0,074 10,5

F68H-W01-AN 142 15.300 17 700 70...793000 730 288 157 0,074 10,5

F68H-C01-AN 142 18.360 17 700 70...795000 730 288 157 0,074 10,5

F36H-W01-AN 75 8.100 9 700 70...793000 730 288 157 0,074 10,5

F36H-C01-AN 75 9.720 9 700 70...795000 730 288 157 0,074 10,5

F43H-N01-AN 92 11.430 9 850 70...794000 730 288 157 0,074 10,5

F52H-N01-AN 109 13.050 9 1000 70...794000 730 288 157 0,074 10,5

F60H-W01-AN 121 13.260 17 600 70...793000 730 288 157 0,074 10,5

F60H-C01-AN 121 15.980 17 600 70...795000 730 288 157 0,074 10,5

F68H-N01-AN 142 18.360 17 700 70...794000 730 288 157 0,074 10,5

F36H-N01-AN 75 9.720 9 700 70...794000 730 288 157 0,074 10,5

F43H-W01-AN 92 9.540 9 850 70...793000 730 288 157 0,074 10,5

F43H-C01-AN 92 11.430 9 850 70...795000 730 288 157 0,074 10,5

(Kg)

10,5

10,5

10,5

10,5

10,5

10,5

10,5

10,5

10,5

� Optional

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)


[KF-GSM] =ZXYeZ_X�cV^èV�T`_ec`]�hZeY�8D>�eVTY_`]`Xj�`_�ALIGHT platform

� @eYVc�T`]`cd�RgRZ]RS]V�

`_�cVbfVde

STANDARD COLOUR

2_eYcRTZeV�8cVj�C2=�(!#%

DETAILS

� 2]f^Z_Zf^�UZV�TRde�SÙj

� DVTfcZ_X�X]Rdd�WcR^V�Z_�23D

�

� EVâVcVU�X]Rdd�%�^^

4`_ec`]�XVRc�T`âRce^V_e�:A''

�

�

@aeZTR]�T`âRce^V_e�:A''�

�

! >110lm/W

� =ZWVeZ^V+�)!�!!!�Ycd

� LED DrivVc�Z_eVXcReVU

� LED quadrichip Cree

AYZ]Zad�=f^Z]VUd

=f Z_`fd�d`fcTV�VWWZTZV_Tj�

� C4E�DeR_URcU+�N (4000K ± 300K)

C4E�optional: W (3000K ± 300K)

C4E�optional: C (5000K ± 300K)


� 4C:��CR��DeR_URcU+�(!��(*

� C`RU�2dj^^VecZT��aYè`^Vecj�

DVTeZ`_Z_X�W]Zad�Z_�23D

DESIGN

APPLICATIONS

� 9ZXYhRjd

� FcSR_�C`RUd��DfSfcSR_�c`RUd

�

� DbfRcVd

� 4jT]Z_X�]R_Vd

� ARc\Z_X�RcVRd

AcZgReV�decVVe

:__`gReZgV�5VdZX_ =65�EVTY_`]`Xj BfR]Zej�>RUV�Z_�:eR]j

+45°C

-20°C

LEDF

70...794.000 K

220

240IP66 IK08

0,07410,5 Kg

80.000 hPCPKSA

Pro

duct

Conformity Program

125

280 3.000 K 5.000 K

PHOTOMETRY

"#!��i�%!��2DJ>>6EC:4�L!"N

� 2dj^^VecZT�aYè`^Vecj�

APPLICATION EXAMPLE

� 2ddZdeVU�]ZXYeZ_X�UVdZX_

OTHER APPLICATIONS

ENERGY SAVING

� 6iRâ]Vd�aW�T`âRcZeZ`_

0

50 W

100 W

150 W

200 W

250 W

300 WEcRUZeZ`_R]�#&!H

Futura F68H

0

30 W

60 W

90 W

120 W

150 W

180 W

50,2 %

EcRUZeZ`_R]�"&!H

Futura F43H

45,2 %Actual

T`_dfâeZ`_285 W

ActualT`_dfâeZ`_

142 W

ActualT`_dfâeZ`_

168 W

ActualT`_dfâeZ`_

92 W

Po

wer Reduction

P

ower ReductionFutura


C0-C180 C90-C270!�

*!� 320

On double arm-pole On single arm-poleMOUNTING OPTIONS

� Standard mounting

on arm-pole

Fixed head-pole

KM-F-TPMOUNTING ACCESSORIES

� Optional mounting

on head-pole

250 mm

(Ø) 60 mm

26

0 m

m

Adjustable head –pole

KM-F-OR

220 mm

(Ø) 60 mm

17

0 m

m

"&�

)XWXUD


*XLGD



Made in Italy

*XLGD


Look at the street with a di!erent vision

*XLGD


MAIN FEATURES

)L[WXUH�FRPSRVLWLRQ�'LH�FDVW�$OXPLQLXP�VLQJOH�%RG\�,QWHJUDWHG�GLH�FDVW�DOXPLQLXP��KHDW�VLQN�Closing stainless still clips.

2SWLFDO�XQLW�Asymmetrical street lens with high precision collimators for light beam concentration.

/LIH�6SDQ��/��>50.000 h.

0RXQWLQJ�LQWHJUDWHG�DGMXVWDEOH�V\VWHP�RQ��$UP�RU��RQ�+HDG��3ROH�PRXQWLQJ�

)RFXV�)L[WXUH�DYDLODEOH�LQ�WZR�FRORUV��$QWKUDFLWH�*UH\�5$/��DQG�*UH\�

$SSOLFDWLRQV�8UEDQ�DQG�VXEXUEDQ�URDGV��3ULYDWH�VWUHHW��6TXDUHV��3DUNLQJ��3HGHVWULDQ�DUHDV��&\FOLQJ�ODQHV�

ADVANTAGES

*UHDW�ˊH[LELOLW\�'LH�FDVW�DOXPLQXP�ERG\��ODUJH��GLH�FDVW�DOXPLQXP�KHDW�VLQN�LQWHJUDWHG�LQ�WKH�ODPS�ERG\��/('�6HFWLRQ�OLJKWLQJ�HDV\�WR�UHSODFH�IRU�TXLFN�PDLQWHQDQFH��5-year warranty.

([FHOOHQW�HIˉFLHQF\�+LJK�HIˉFLHQF\�PXOWLFKLS�/('�FRPELQHG�ZLWK�D�VHFRQGDU\�OHQV�RI�KLJK�SHUIRUPDQFH�LQ�RUGHU�WR�PHHW�DOO�OLJKWLQJ�UHTXLUHPHQWV��

5DSLG�PDQDJHPHQW�DQG�FRPIRUW�7KDQNV�WR�WKH�5HPRWH�&RQWURO�RU�WKH�LQGHSHQGHQW�UHJXODWRU�RI�OXPLQRXV�ˊX[�LW�LV�SRVVLEOH�WR�FKHFN�WKH�VWDWXV�DQG�PRQLWRU�FRQVXPSWLRQ��)RU�PRUH�LQIRUPDWLRQ�VHH�5HPRWH�&RQWURO�IHDWXUHV�


Philips Lumileds

�

! >110lm/W









STANDARD COLOUR

Anthracite Grey RAL 7024

DETAILS

� Aluminium die cast body

� Optional color

� Tempered glass 4 mm

� Assymetric street lens

� 7ZiefcV�Z_T]Z_ReZ`_��"&��s�"&�

Grey RAL 7035

GUIDA

DESIGN

CHARACTERITICS

� Standard LED

70...794.000 K 0,0508,5 Kg

50.000 h

+45°C

-20°CF220

240IP65

IP66

IK08

24V12V125280 3.000 K 5.000 K

*XLGD


SIZE

a

(Ø) 65 mm

hb

Code (W) (lm) n° LED (mA) CCT (K) CRI (Ra) a (mm) b (mm) h (mm) W.Exp. (m²) (Kg)

G6H-[K]A1-AN 52 6.000 6 700 4000/5000 70...79 620 290 152 0,050 8,5

G7H-[K]A1-AN 61 7.000 7 700 4000/5000 70...79 620 290 152 0,050 8,5

G8H-[K]A1-AN 69 8.000 8 700 4000/5000 70...79 620 290 152 0,050 8,5

G9H-[K]A1-AN 78 9.000 9 700 4000/5000 70...79 620 290 152 0,050 8,5

G3H-[K]A1-AN 27 3.000 3 700 4000/5000 70...79 620 290 152 0,050 8,5

G5H-[K]A1-AN 44 5.000 5 700 4000/5000 70...79 620 290 152 0,050 8,5

G4H-[K]A1-AN 35 4.000 4 700 4000/5000 70...79 620 290 152 0,050 8,5

G6H-WA1-AN 52 5.400 6 700 3000 70...79 620 290 152 0,050 8,5

G7H-WA1-AN 61 6.300 7 700 3000 70...79 620 290 152 0,050 8,5

G8H-WA1-AN 69 7.200 8 700 3000 70...79 620 290 152 0,050 8,5

G9H-WA1-AN 78 8.100 9 700 3000 70...79 620 290 152 0,050 8,5

G3H-WA1-AN 27 2.700 3 700 3000 70...79 620 290 152 0,050 8,5

G5H-WA1-AN 44 4.500 5 700 3000 70...79 620 290 152 0,050 8,5

G4H-WA1-AN 35 3.600 4 700 3000 70...79 620 290 152 0,050 8,5

� Optional

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)


[KG-GSM] Lighting remote control with GSM technology on ALIGHT platform

[KG-12V] Available for photovoltaic application (power supply 12V d.c. ) [KG-24V] Available for photovoltaic application (power supply 24V d.c. )

APPLICATIONS

� Urban Roads

� Suburban roads

�

� Squares

� Cycling lanes

� Parking areas

� Pedestrian areas

Private street

Innovative Design LED Technology Quality Made in Italy

Power supply 12V d.c. Power supply 24V d.c.

"$)��i�&!��2DJ>>6EC:4�L2"N�

C0-C180 C90-C270!�

*!� 300

PHOTOMETRY

� Asymmetric photometry

APPLICATION EXAMPLE

� Assisted lighting design

OTHER APPLICATIONS

� Photovoltaic KG-12V KG-24V

ENERGY SAVING

� Examples of comparision

0

20 W

40 W

60 W

80 W

100 W

120 WTraditional 100 W

Actualconsumption

115 W

Actualconsumption

63 W

Guida G7H

0

15 W

30 W

45 W

60 W

75 W

90 W

Po

wer Reduction

P

ower Reduction

45,2 %

Traditional 70 W

Guida G5H

44,4 %Actual

consumption81 W

Actualconsumption

45 W

*XLGD


MOUNTING OPTION

� Adjustable mounting system

��"&��s�"&��Z_eVXcReVU

in the fitting

On head-pole On arm-pole

*XLGD


=HQLWK



Made in Italy

GHOST - R

=HQLWK


& the charm of the pastThe technology of the future

=HQLWK


ADVANTAGES

/('�7HFKQRORJ\�LQQRYDWLRQ�IRU�WUDGLWLRQDO�6WUHHW�)XUQLWXUH�=HQLWK�LV�D�WHFKQRORJLFDOO\�DGYDQFHG�/DPS�DOORZLQJ�WR�HQMR\�DOO�WKH�EHQHˉWV�RI�/('�DQG�SUHVHUYH�WKH�ORRN�RI�WUDGL-WLRQDO�XUEDQ�FHQWHUV��ERXOHYDUGV�DQG�ROG�7RZQ�FHQWHUV�

%HQHˉWV�IRU�SXEOLF�$GPLQLVWUDWLRQ�7KH�XVH�RI�/('�ODPSV�DOORZ�WR�VDYH�XS�WR��RQ�HQHUJ\�FRVWV�=HQLWK�/LIH�VHUYLFH�LV�WKUHH�WLPHV�KLJKHU�WKDQ�WUDGLWLRQDO�HQHUJ\�VDYLQJ�ODPSV��KRXUV��7KH�OLIH�&\FOH�RI�D�/('�UHDFKHV��KRXUV��WKDW�PHDQV�DERXW��\HDUV�RI�FRQWLQXRXV�RSHUDWLRQ��KRXUV�3HU�'D\��DQG�GXULQJ�WKLV�SHULRG�=HQLWK�EULQJ�GRZQ�PDLQWHQDQFH�FRVWV�

5HVSHFW�IRU�WKH�HQYLURQPHQW�DQG�IRU�WKH�FLWL]HQ�/('�LV�7R[LF�DQG�KDUPIXO�)UHH��,W�GRHVQȠW�FRQWDLQ�*DV�DQG�0HUFXU\�6WHDP�SUHVHQWV�LQVLGH�WUDGLWLRQDO�/DPSV�=HQLWK�LV�(FR�)ULHQGO\��VLQFH�LW�LV�EXLOW�ZLWK�UHF\FODEOH�PDWHULDOV�DQG�LWV�FRPSRQHQWV�FDQ�EH�HDVLO\�GLVDVVHPEOHG�DQG�recycled.

MAIN FEATURES

)L[WXUH�FRPSRVLWLRQ�$OXPLQLXP�GLH�FDVW�VLQJOH�%RG\�WR�DQFKRU�RQ�D�3ROH�RU�+DQJLQJ�

2SWLFDO�XQLW�Asymmetrical and rotosymmetrical Optics.

/LIH�6SDQ��/��>50.000 h.

5HPRWH�&RQWURO��RSWLRQDO�/XPLQRXV�ˊX[�6HOI�UHJXODWRU�RQ�GHPDQG�ȝ�VWDWXV�FKHFN�DQG�FRQVXPSWLRQ�FRQWURO�7R�NQRZ�PRUH�ORRN�DW�WKH�IHDWXUHV�RI�5HPRWH�&RQWURO�

0RXQWLQJ�2Q�3ROH�RU�+DQJLQJ��ZLWK�VSHFLDO�DFFHVVRULHV�VXSSOLHG�RQ�GHPDQG��

)RFXV�:LWK�WKH�&KRLFH�RI�=HQLWK�LV�SRVVLEOH�WR�UHFHLYH�D�UHSRUW�RQ�WKH�FDOFXODWLRQ�RI�WKH�WLPH�QHHGHG�WR�FRP-SHQVDWH�WKH�LQYHVWPHQW��3$<�%$&.��

$SSOLFDWLRQV� 6WUHHW�)XUQLWXUH��2OG�7RZQ�&HQWHUV��6TXDUHV��7UHH�OLQHG�$YHQXH��3DUNV��*DUGHQV��3URPHQDGHV�

C0-C180 C90-C270!�

*!� 300

"$)��i�&!��2DJ>>6EC:4�L2"N� "&%��COTO-SYMMETRIC [R1]

C0-C180 C90-C270!�

*!� 240

APPLICATIONS

� Urban design

�

� Squares

� Boulevards

� Pathways

� Parks

� Gardens


Old town center


Philips Lumileds

�

! >110lm/W









STANDARD COLOUR

DETAILS

�

�

Aluminium die cast body

Antiqued Black

Assymetric and roto symmetric

photometry

ZENITH

CHARACTERITICS

� Standard

� Optional

PHOTOMETRY

LED

70...794.000 K 10,5 Kg50.000 h

+45°C

-20°CF220

240IP65 IK07

125280 3.000 K 5.000 K

=HQLWK

SIZE

a

h


[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)

[°°]: A1 - R1

Code a (mm) h (mm) (kg)

425 760 10,5

425 760 10,5

425 760 10,5

CCT (K)

4000/5000

3000

4000/5000

3000

4000/5000

3000

CRI (Ra)

70...79

70...79

70...79

70...79

70...79

70...79

425

425

425

760 10,5

760 10,5

760 10,5

Z49�L<NL��N�

Z49�HL��N�

Z6H�L<NL��N�

Z6H�HL��N�

Z8H�L<NL��N

Z8H�HL��N

(W) (lm) LED n° (mA)

35

35 3.600

4.000

5.400

6.000

7.200

8.000

4

4

6

6

8

8

700

700

700

700

700

700

52

52

69

69



Victoria



Light up the History

Made in Italy

Victoria


Victoria


ADVANTAGES

/('�7HFKQRORJ\�LQQRYDWLRQ�IRU�WUDGLWLRQDO�6WUHHW�)XUQLWXUH�9LFWRULDLV�D�WHFKQRORJLFDOO\�DGYDQFHG�/DPS�DOORZLQJ�WR�HQMR\�DOO�WKH�EHQHˉWV�RI�/('�DQG�SUHVHUYH�WKH�ORRN�RI�WUDGLWLRQDO�XUEDQ�FHQWHUV��ERXOHYDUGV�DQG�ROG�7RZQ�FHQWHUV�

%HQHˉWV�IRU�SXEOLF�$GPLQLVWUDWLRQ�7KH�XVH�RI�/('�ODPSV�DOORZ�WR�VDYH�XS�WR��RQ�HQHUJ\�FRVWV�9LFWRULD�/LIH�VHUYLFH�LV�WKUHH�WLPHV�KLJKHU�WKDQ�WUDGLWLRQDO�HQHUJ\�VDYLQJ�ODPSV��KRXUV��7KH�OLIH�&\FOH�RI�D�/('�UHDFKHV��KRXUV��WKDW�PHDQV�DERXW��\HDUV�RI�FRQWLQXRXV�RSHUDWLRQ��KRXUV�3HU�'D\��DQG�GXULQJ�WKLV�SHULRG�9LFWRULD�EULQJ�GRZQ�PDLQWHQDQFH�FRVWV�

5HVSHFW�IRU�WKH�HQYLURQPHQW�DQG�IRU�WKH�FLWL]HQ�/('�LV�7R[LF�DQG�KDUPIXO�)UHH��,W�GRHVQȠW�FRQWDLQ�*DV�DQG�0HUFXU\�6WHDP�SUHVHQWV�LQVLGH�WUDGLWLRQDO�/DPSV�9LFWRULDLV�(FR�)ULHQGO\��VLQFH�LW�LV�EXLOW�ZLWK�UHF\FODEOH�PDWHULDOV�DQG�LWV�FRPSRQHQWV�FDQ�EH�HDVLO\�GLVDV-sembled and recycled.

MAIN FEATURES

)L[WXUH�FRPSRVLWLRQ�$OXPLQLXP�GLH�FDVW�VLQJOH�%RG\�


/LIH�6SDQ��/��>50.000 h.

5HPRWH�&RQWURO��RSWLRQDO�/XPLQRXV�ˊX[�6HOI�UHJXODWRU�RQ�GHPDQG�ȝ�VWDWXV�FKHFN�DQG�FRQVXPSWLRQ�FRQWURO�7R�NQRZ�PRUH�ORRN�DW�WKH�IHDWXUHV�RI�5HPRWH�&RQWURO�

0RXQWLQJ�On Pole.

)RFXV�:LWK�WKH�&KRLFH�RI�9LFWRULD�LV�SRVVLEOH�WR�UHFHLYH�D�UHSRUW�RQ�WKH�FDOFXODWLRQ�RI�WKH�WLPH�QHHGHGWR�FRPSHQVDWH�WKH�LQYHVWPHQW��3$<�%$&.��

$SSOLFDWLRQV� 6WUHHW�IXUQLWXUH��2OG�WRZQ�FHQWHUV��6TXDUHV��7UHH�OLQHG�DYHQXH��3DUNV�ȝ�*DUGHQV

C0-C180 C90-C270!�

*!� 300


C0-C180 C90-C270!�

*!� 240

APPLICATIONS

� Urban design

�

� Squares

� Boulevards

� Pathways

� Parks

� Gardens


Old town center


Philips Lumileds

�

! >110lm/W









STANDARD COLOUR

DETAILS

�

�


Antiqued Black


photometry

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)

[°°]: A1 - R1

VICTORIA

CHARACTERITICS

� Standard

� Optional

PHOTOMETRY

SIZE

a

h

LED

70...794.000 K 13,5 Kg50.000 h

+45°C

-20°CF220

240IP65 IK07

125280 3.000 K 5.000 K

Victoria


Code a (mm) h (mm) (kg)

530 800 13,0

530 800 13,0

530 800 13,0

CCT (K)

4000/5000

3000

4000/5000

3000

4000/5000

3000

CRI (Ra)

70...79

70...79

70...79

70...79

70...79

70...79

530

530

530

800 13,0

800 13,0

800 13,0

V49�L<NL��N�

V49�HL��N�

V6H�L<NL��N�

V6H�HL��N�

V8H�L<NL��N

V8H�HL��N

(W) (lm) LED n° (mA)

35

35 3.600

4.000

5.400

6.000

7.200

8.000

4

4

6

6

8

8

700

700

700

700

700

700

52

52

69

69



Stradale Gallerie

8UEDQ�.LW



Technology meets tradition

Made in Italy

GHOST - R

8UEDQ�.LW


8UEDQ�.LW


MAIN FEATURES


/LIH�6SDQ��/��>50.000 h.

)RFXV�8UEDQ�.LW�LV�VXLWDEOH�WR�DQ\�NLQG�RI�XUEDQ�ˉ[WXUH��QRW�RQO\�WR�WKH�/DQWHUQV�ZLWKKLVWRULFDO�DQG�FXOWXUDO�YDOXH��EXW�DOVR�WR�WKH�QHZ�JHQHUDWLRQ�RI�OLJKWLQJ�)L[WXUHVXVLQJ�WUDGLWLRQDO�OLJKWLQJ�7HFKQRORJ\�

$SSOLFDWLRQV� 2OG�7RZQ�&HQWHUV��6WUHHW�IXUQLWXUH��+LVWRULFDO�DQG�FXOWXUDO�SODFHV6TXDUHV��5RDGV��*DUGHQV��3DUNV��7UHH�OLQHG�DYHQXHV

ADVANTAGES

0RGHUQL]DWLRQ�RI�H[LVWLQJ�SURGXFWV�$Q��LOOXPLQDWLQJ�NLW�XVLQJ�/('�WHFKQRORJ\�ˉWV�SHUIHFWO\�LQVLGH�WKH�H[LVWLQJ�ˉ[WXUH�DOORZLQJ�WR�PDLQWDLQ�WKH�KLVWRULFDO�DQG�FXOWXUDO�YDOXH�RI�WKH�/DQWHUQ�DQG�DW�WKH�VDPH�WLPH�WR�WDNH�DGYDQWDJH�RI�D�PRGHUQ�WHFKQRORJ\�DQG�LWV�EHQHˉWVRQ�HQHUJ\�VDYLQJ�

(DV\�WR�,QVWDOO�.LW�DSSOLFDWLRQ�GRHVQȠW�UHTXLUH�VWUXFWXUDO�FKDQJHV�RI�WKH�)L[WXUH�DQG�LV�FDUULHG�RXW�ZLWKRXW�GLIˉFXOW\�LQ�D�VKRUW�time.

'RXEOH�VDYLQJ��,PPHGLDWH� WKDQNV�WR�WKH�SXUFKDVH�RI�WKH�WHFKQRORJ\��ZLWKRXW�WKH�QHHG�RI�WKH�H[WHUQDO�VWUXFWXUH�2YHU�WLPH� WKURXJK�FRQVXPSWLRQ�DQG�PDLQWHQDQFH�FRVWV�VDYLQJ�

5HPRWH�FRQWURO��RSWLRQDO��7KDQNV�WR�ZLUHOHVV�RU�SRZHU�OLQH�FDUULHU�WHFKQRORJ\��FRQVXPSWLRQ�DQG�WKH�FRUUHFW�GHYLFH�RSHUDWLRQ��6WDWXV�FKHFN��DUH�PRQLWRUHG�)RU�PRUH�LQIRUPDWLRQ�ORRN�DW�5HPRWH�&RQWURO�)HDWXUHV�

C0-C180 C90-C270!�

*!� 300


C0-C180 C90-C270!�

*!� 240

1 - Remove the old discharge lamp 2 - Insert the URBAN KIT 3 - Lantern with URBAN KIT

URBAN KITLED MODULE

DISCHARGE LAMP DRIVER

TRADITIONAL LANTERN

DISSIPATOR

�

�

APPLICATIONS

Urban design

� Squares and pedestrian areas

� Boulevards, parks and gardens

Old town center


Philips Lumileds

�

! >110lm/W








DETAILS

�

�



photometry

URBAN KIT

CHARACTERITICS

� Standard

PHOTOMETRY

INSTALLAZIONE KIT

SIZE

a

b

+45°C

-20°C

LED

70...794.000 K 2,5 Kg50.000 h

F220240

125280 3.000 K 5.000 K

8UEDQ�.LW


Code CCT (K)

4000/5000

3000

4000/5000

3000

4000/5000

3000

CRI (Ra)

70...79

70...79

70...79

70...79

70...79

70...79

a (mm)

239

239

239

239

239

239

h (mm)

53

53

53

53

53

53

b (mm)

205

205

205

205

205

205

(kg)

2,5

2,5

2,5

2,5

2,5

2,5

K49�L<NL��N�

K49�HL��N�

K6H�L<NL��N�

K6H�HL��N�

K8H�L<NL��N

K8H�HL��N

(lm)

3.600

4.000

5.400

6.000

7.200

8.000

LED n°

4

4

6

6

8

8

(mA)

700

700

700

700

700

700

(W)

35

35

52

52

69

69

[K]: N (4000K ± 300K) - W (3000K ± 300K) - C (5000K ± 300K)

[°°]: A1 - R1


� Optional

a

h

b

h

5HVRXUFHV�ȧ�6\PEROV�JXLGHOLQHV

www.niteko.comPag. 48 Eleva - 06/2014 - V. 2

SYMBOLS GUIDELINES

Application

Light source icons

Street

Urban

Photovoltaic

Industrial

Large areas

Tunnels

Architectural

Commercial

Sports

LED

LED TUBE LED Tube (Ø 26 mm - Base G13) Base type

LED source RGBW LEDS source

LED

T8

LED RGBW

LED LAMP

LEDR B*

Exposure Wind exposure

Max weight

Lifetime Life Span (L70)

Kit emergenza Emergency Kit (1 h)

Maximum weight of the fixture

IKXX Degree of shock resistance

IPXX Degree of protection

Dimmable Via DALI Protocol or 1-10V Analog Protocol

Remote Control Automatic luminous

Pre-programm. Flux regulator

CRI Chromatic Rendering Index (Ra)

CCT Correlated colour temperature[W (3000K ± 300K) - N (4000K ± 500K) - C (5500K ± 500K)]0.000 K

General icons

CE CE Certificate

TUV CertificateTUV

GHOST-R GHOST-R Certificate

Elliptic The fixture has an elliptic beam emission

Fixture with a limited upward dispersion of the luminous flux

Surge Protection Device (10 kV)

The fixture has a wide beam emission

The fixture has a narrow beam emission

The fixture has an asymmetric beam emission

Cut-off

SPD

KSA-PCP KSA-PCP Certificate

FlammabilityF

Anti-corrosion

Energy Saving Fixture with high energy efficiency

Not dimmable Uncompatible with a device that varies the light intensityEco-friendly Recyclable fixture

Camera With IP-Camera on boardTemperature Maximum and minimum operating temperature

Wide beam

Spot beam

Asym. beam

RoHS RoHS Certificate

AbsentUV Emission

Indoor Suitable only for indoor installation

Outdoor Suitable only for oudoor installation

In/Outdoor Suitable for both indoor and outdoor installation.

Class I fixture (single insulation)

Class II fixture (double insulated)

Class III fixture

Voltage of the fixture

Voltage of the fixture

Suitable for installation on flammable surfaces

Coating that affords the fixture protection against chemicals

Classe I

Classe II

Classe III

AC Voltage

DC Voltage00V

+00°C

-00°C

PCPKSA

Produ

ct

Conformity Program

LED

IPXX

IK00

LED

XXX

How to reduce consumptionand save money in a smart way

TELECONTROLAND FLOW ADJUSTMENT

SELF-ADJUSTNG FLOW�35*�

CABLE ADJUSTMENT�',0�'$/,�

32:(5�/,1(�&2081,&$7,21�3/&�/3/�

RADIO WAVES CONTROL�/,*+7�&/28'�

7KH�LQLWLDO�LQYHVWPHQW�RQ�WKH�UHPRWH�FRQWURO�WXUQV�LQWR�D�JDLQ�LQ�WKH�UHGXFWLRQof maintenance costs with at least an DGGLWLRQDO��LQ�HQHUJ\�VDYLQJV,

compared to a device that does not have it.

5HVRXUFHV�ȧ�5HPRWH�&RQWURO


��5HPRWH�FRQWURO�DQG�DGMXVWPHQW�RI�WKH�WRWDO�OXPLQRXV�ˊRZ�HPLWWHG��IURP��WR��HLWKHU�PDQXDOO\�WKRXJK��GHGLFDWHG�FLUFXLWV��RU�DFFRUGLQJ�WR�SUH�VHW�WLPHV��,QVWDQW�FDOFXODWLRQ�RI�WKH�FRQVXPHG�HQHUJ\��0HDVXULQJ�WKH�ZRUNLQJ�WHPSHUDWXUH�DW�WKH�ZHOGLQJ�SRLQW�RI�WKH�/('V�DQG�WKH�UHODWHG��DODUPV��(YDOXDWLRQ�RI�WKH�IXQFWLRQLQJ�VWDWH��IXQFWLRQLQJ��IDXOW��DQG�UHODWHG�DODUPV��0HDVXUHPHQW�RI�ZRUNLQJ��KRXUV�

1. Cost optimization of personnel and vehicles.

2. 7KH�WHVW�RI�SURSHU�RSHUDWLRQ�HOLPLQDWHV�WKH�WURXEOHVKRRWLQJ�FRVWV�DQG�DOORZV�D�UDSLG�DFWLRQ

3.�6SHFLˉF�DODUPV�SURYLGH�D�WDUJHWHG�FRQWURO�RI�WKH�IDXOW�HOHPHQWV��IRU�WKH�UHSODFHPHQW�RI��MXVW�RI�WKH�IDXOW�RQHV��VDYLQJ��

RQ��SXUFKDVHV�

7KH�PDQDJHPHQW�DQG�FRQWURO�RI�WKH�OLJKWLQJ�VHUYLFH�WKURXJK�UHPRWH�FRQWURO��RU�WKURXJK�VHOI�DGMXVWPHQW�FRQWURO��PDNHV��WKH�PDLQWHQDQFH�FRPSDQ\��PRUH�HIˉFLHQW��DGGV�YDOXH�WR�LWV�SURIHVVLRQDOLVP�DQG�SURWHFWLRQ�RI�WKH�FLWL]HQ��HQVXULQJ�UHVROXWLRQ�RI�SRWHQWLDO�SUREOHPV�LQ�D�VKRUW�WLPH�DQG�FRQVHTXHQWO\�OLPLWLQJ�WKH�LQFRQYHQLHQFH�GXH�WR�LQWHUUXSWLRQ�RI�SXEOLF�OLJKWLQJ�

6DYLQJ


www.niteko.comPag. 50 Eleva - 06/2014 - V. 2

7KH�UHPRWH�FRQWURO�DOORZV�WR�UHPRWHO\�PDQDJH�WKH�OLJKWLQJ�ˉ[WXUHV�DOORZLQJ�DQG�DGGLWLRQDO�VDYLQJ�RQ�HQHUJ\�FRVWV��RYHU�WKRVH�DFKLHYHG�E\��/('�WHFKQRORJ\��DQG�RI�PDLQWHQDQFH�FRVWV�$OO��OLJKWLQJ�ˉ[WXUHV�FDQ�EH�HTXLSSHG�ZLWK�DXWRPDWLF�UHPRWH�FRQWURO�V\VWHPV��SUH�SURJUDPPLQJ��ZLWKRXW�XVLQJ�

,WHJUDWHG�LQ�WKH�ˉ[WXUH��DYDLODEOH�LQ�WKH�YHUVLRQV��5DGLR�ZDYHV�VHWWLQJ��:L�ˉ��*60�WHFKQRORJ\��3RZHUOLQH�FRPPXQLFDWLRQ�WHFKQRORJ\��6HOI�DGMXVWLQJ�ˊRZ��SUH�SURJUDPPLQJ��&DEOH�DGMXVWPHQW��DQDORJ��GLJLWDO�

$YDLODEOH�)HDWXUHV�

%RWK�W\SHV�DUH�DYDLODEOH�RQ�WKH�IROORZLQJ�LQGXVWULDO�SURGXFWV�

.H\�IHDWXUHVRI�VHOI�DGMXVWPHQW�FRQWURO

REMOTE CONTROL

=HQLWK)XWXUDUrano Halley 8UEDQ�.LW*XLGD Victoria

6HOI�DGMXVWLQJ�ˊRZ

NITEKO lamps can be equipped with a self adjusting flow , integrated in the luminaire, suitable for the control and reduction of the luminous flux of the lamp by 20% up to 100% of the maximum value, without using dedicated cables. The device is equipped with a fully programmable microcontroller, able to manage the power supply section of the unit, of any load of LED light sources (on, off, testing of correct operation, adjustment of the luminous flux), the operation is based on possibility to define, by preprogramming 5 levels of brightness, on a time basis, set by configuration software. The system calibrates the "Midnight point" during the period of time the unit is powered, allowing , through the settings selected by the softwa-re, a reduced capacity.

6WDQG�DORQH�FRWUROOHU�RI�WKH�OXPLQRXV�ˊX[,QWHJUDWHG�LQ�WKH�FRQWURO�JHDU�RI�WKH�OLJKWLQJ�ˉ[WXUH��WR�FRQWURO�DQG�UHGXFH�WKH�OXPLQRXV�ˊX[�IURP��XS�WR��RI�WKH�PD[LPXP�YDOXH��ZLWKRXW�GHGLFDWHG�FDEOHV�

3URJUDPPDEOH�PLFUR�FRQWUROOHU$�SURJUDPPDEOH�PLFUR�FRQWUROOHU�FDQ�PDQDJH�WKURXJK�WKH�VHWWLQJ�GHˉQHG�E\�XVHU��OHYHOV�RI�EULJKWQHVV��VHW�E\�D�FRQˉJXUDWLRQ�VRIWZDUH��7KH�V\VWHP�FDOLEUDWHV�WKH��0LGQLJKW�SRLQW��GXULQJ�WKH�SHULRG�RI�WLPH�WKH�XQLW�LV�SRZHUHG��DOORZLQJ�WKURXJK�WKH�VHWWLQJ�VHOHFWHG�E\�WKH�VRIWZDUH�D�UHGXFHG�FDSDFLW\�

&DEOH�DGMXVWPHQW

Through the use of dedicated cables , with the DIM module it is possible to manage and adjust the light intensity of Niteko lamps by a 1-10V analog signal . Using instead, the DALI interface module, it is possible an intelligent management of the light according to the specific needs of the environment to be illuminated.

DALI is a digital communication protocol of the dimmable electronic ballasts . This new interface standard represents a system with distributed intelligence . This means that the values of light emission of different lighting scenarios and the grouping of different light sources are stored within the electronic power supplies . The control system has only the function to invoke a given scenario and electronic power supply, who knows his level of light output and acts accordingly. It is possible also to call each single power supply . To ensure interchangeability between DALI components from different manufacturers, the DALI interface has been included as Appendix E of IEC 929 rules , becoming in this way a non-owner standard , able to meet all the requirements of modern light control.

100%

12:00 15:00 17:00 19:00 21:00 23:00 01:00 03:00 05:00 07:00 09:00 11:00

20:00 6:00 10:00

80%

60%

40%

20%

0%

D1 D5

D2

D3

D4

([DPSOH�RI�FRQˉJXUDWLRQ�RI�D�GLPPHU�PRGXOH

2))

ON

Test ofFRUUHFW�IXQFWLRQLQJ�

$GMXVWPHQW�RI�OXPLQRXV�ˊX[�

)XQFLRQDOLW\



PLUG’N PLAY

)URP�1LWHNR�DQG�$FRWHO�FRRSHUDWLRQ�ERUQ�WKH�QHZ�/LJKW�&ORXG�)L[WXUH�VHULHV��WKDQNV�WR�ALIGHT, the new IURQWLHU�LQ�UHPRWH�OLJKWLQJ�FRQWURO�XVLQJ�/&*�7HFKQRORJ\�E\�$FRWHO�

A simple click to be connected

SOFTWARE LCG GSM

FUTURA FIXTURE

7KH�HYROXWLRQ�of remote lighting control.

SMS

:LWK�/LJKW�&ORXG�HDFK�1LWHNR�OLJKWLQJ�SRLQW�FDQ�EH�

6LQJXODUO\�PDQDJHDEOH�LQ�WHUPV�RI��LOOXPLQDWLRQ�OHYHO��GLPPHU��DQG�LQ�WHUPV�RI�WXUQLQJ�RQ�DQG�RII��7KLV�DOORZV�WR�UHGXFH�FRQVXPSWLRQ�ZKHQ�LW�LV�SRVVLEOH�WR�UHGXFH�WKH�OXPLQRXV�ˊX[��VXQULVH�DQG�VXQVHW��JRRG�ZHDWKHU�FRQGLWLRQV��ORZ�SUHVHQFH�RI�FDU��SHGHVWULDQV��HWF��

6LQJXODUO\�PDQDJHDEOH�RU�FRQWUROOHG�LQ��JURXSV��RU��]RQHV��ZLWK�FRPPRQ�IHDWXUHV��URDG�YLDELOLW\��SDUNLQJ�ORWV��6SRUW�IDFLOLWLHV��0XVHXPV�HWF��

6LQJXODUO\�PHDVXUDEOH�LQ�UHDO�WLPH�IURP�WKH�SRLQW�RI�YLHZ�RI�FRQVXPSWLRQ��ZLWK�LPPHGLDWH�VLJQDO�LQ�FDVH�RI�IDXOWV�DQG�PLVˉULQJ�OLJKWLQJV�

6WDQG�DORQH�SHUPDQHQWO\�SRZHUHG��DOORZLQJ�WKH�FRQQHFWLRQ�DW�DQ\�HOHFWULF�JULG�SRLQW�ZLWKRXW�WKH�QHHG�RI�connection with other lighting points.


RDGLR�ZDYHV�FRQWURO

ALIGHT Technology is available on:

Moreover...

ALIGHT IS A CLOUD &20387,1*�(1$%/('�3/$7)250

=HQLWK)XWXUDUrano Victoria*XLGD

0DQDJHDEOH�DFFRUGLQJ�WR�SUH�VHW��DQG�SURJUDPPDEOH�ODQGVFDSHV��ZLQWHU��VXPPHU��SXEOLF�HYHQW��ORFDO�IHVWLYDOV��HWF��

7KLV�VROXWLRQ�DOORZV�WR�HQDEOH�DQG�PDQDJH�XVHUV�ZLWK�GLIIHUHQW�SURˉOHV�ZKLFKFRUUHVSRQG�WR�WKH�VHUYLFH�IHDWXUHV�

12


Power line comunication

The system uses the Power Line Communication (PLC ) : it is a technology for the transmission of data through the electric supply system . It is realized by overlapping the transport of electrical current signal to a higher frequency which is modulated by the information to be transmitted. The separation of the two kinds of currents is performed by filtering and separating the frequency interval used.

Features of PLC communication:

��FdZ_X�eYV�ViZdeZ_X�_Veh`c\��VgV_�`]U��hZeY�_`�_VVU�`W�TYR_XVd�R_U�acV]Z^Z_Rcj�dfcgVjd��?`�_VVU�`W�WZ]eVcd�`W�R_j�\Z_U�+�eYV�ecR_d^ZddZ`_�Zd�hZeY�WcVbfV_Tj�^Ùf]ReZ`_��hYZTY�ac`gZUVd�cVdZdeR_TV�e`�Z_eVcWVcV_TV�acVdV_e�`_�the network.��7f_TeZ`_Z_X��R]d`��`_�`Sd`]VeV�R_U�VieV_UVU�VbfZa^V_e�hZeY`fe�eYV�_VVU�e`�Z_deR]]�RUUZeZ`_R]�T`â`_V_ed�SVTRfdV�VRTY�_ÙV�Z_�the system is also a signal repeater . The system consists of an electronic ballast with integrated remote control device and a control unit that collects data from the spots lighting, communicates with the remote control management and sends commands on-off – adjustment point to point



The communication between the control unit and the control management is made through modem GSM/GPRS on Ethernet interface

The communication between the spots lighting and the panels made through power line communication on the existing electric line

Assistance

Maintenance

Control Unit

Internet

Management centerServer

Setting 1

Setting 2

Setting 3

Setting 4

The software can be installed on a standard PC in a few minutes, allows to enter detailed information for each point (example: pole number, fitting model, power and lamp type) and to operate in total autonomy on each spot light

Configuration and change of the behavior of each spot light and / or point groups with the same behavior (on, off, profiling and adjustment according to the time schedules and weekly programming)

Collecting data via web on point-to-point operation (voltage, current, Pass, cosø, Ta, Vlamp).

Anomaly signal (exp. faulty lamp, end of life lamp, absence of one or more phases, lack of communication with one or more points).

Monitoring of consumption and electrical-level framework (with reports and historical trends).

Architecture

Functions



Communication characteristics LPL:

Through the LPL module bidirectional it is possible to manage and adjust the flow of light through an analog signal 1-10V, withoutthe use of dedicated cables, but simply taking advantage of the power wires of the devices.

Control Unit

Server

Internet

Management center

Management center

Maintenance

The control unit continuously collects the operating parameters of the light fixtures and report any anomalies (example lamp off)

5HVRXUVFHV�ȧ�2YHUYROWDJH


OVERVOLTAGE

MANAGEMENT OF OVERVOLTAGEFOR ELECTRONIC EQUIPMENTThe problem of overvoltage due to direct and indirect current discharge is present very clearly in electronic equipments. Are affected by this issue, all appliances powered with electronic devices , from cameras to lighting fittings . The issue can affect any type of installation, but it is also true that in the case of plants in urban center or in specially protected areas , the percentage of the problem is practically not existing. A lighting fixture installed in a standard electrical system is often subjected to over voltage and external interferences due to various causes: insertion of disconti-nuous loads on the line, fault lines in upstream or downstream , atmospheric discharges (lightning ) . The capacity to be protected against overvoltage is therefore fundamental to the reliability and proper functionality of the product, that owing to these disorders may be damaged or malfunction . In the LED fixture , where the electronic components are predominant , resistance to overvoltage becomes even more necessary .

MINIMUM PRODUCTS REQUIREMENTS The feature of overvoltage protection is regulated by a specific standard (EN 61547 ), which establishes the minimum levels of product , ensuring compliance with the essential requirements of the Directive on Electromagnetic Compatibility , mandatory for CE marking of the product.

SYSTEM PROTECTIONThe atmosfepheric discharge are events highly uncertain . It is not possible to foreseen:- the location - the intensity - the moment when such an event will occur.

The protection provided on NITEKO appliances is an important protection , but it can be in some cases not enough when the weather events, to which the appliances are subjecte, exceed the levels tested in the laboratory, by the surge tests above described.

It is important, that the system designer can choose ( coordinate ) the appropriate protection of plant taking into account:- the characteristics of the device - installation location , and its susceptibility to lightning (checking for example maps of density of lightning that classify the area accordingly to the frequency of lightning as show in the picture below)

- type of system ( overhead wire or Ground) - type of support ( metallic or not )- supply line lengh - insulation class ( presence of PE earth wire or of a foudation earth for each pole , etc.).

The LED fixtures NITEKO are equipped as standard with a surge protection device , it is a varistor which is activated when the fitting is subjected to a high voltage . In the case of products in insulation class II ( no earth wire ), the device is always present, but its proper functioning is related primarily to the type of system it is installed on the device . The plants can be of various types, they differ mainly in design philosophy . The issues to be considered are: the system is in insulation class II ? The poles are equipped with a ground connection ? The electrical panel is equipped with a ground connection ? The system is completely underground or has overhead wire ?

Based on the experience , Niteko proposes the steps that can be taken into consideration to protect the LED products .

Case 1. Plant completely in insulation class II ( panel and poles without earthing systems, generally more recent ) . In this case the solution that better protects the equipment, is to mount on the electrical panel an arrester voltage for each phase and provide the electrical panel for a ground connection. Alternatively equip each connecting pole to the ground with an appropriate voltage dischar-ger and fuse.

Case 2. Plant in class II , but the poles are provided with earth connection. In this case we propose to mount the discharger voltage directly on in the terminal of the pole or lamp by connecting it to ground .

In both cases, the disgarcher protects the product from surges arriving from upstream with respect to the device. Obviously if the over voltage comes in a direct way or from area located downstream of the SPD device, the device is much more vulnerable. In final analysis , given the various types of cases and according to the its experiance, Niteko suggests where possible, to install equipment in insulation class I or insulation class II with a ground pole or to a SPD.

STREET LIGHTINGProtection level etoN Type

Protection level etoNType

Classe I

� 4 kV Line/Neutral - Line/PE - Neutral/PE

+ K[S*]-SPD - Surge Discharger 10kV - Type II - 5kA

*S= Product code series (Es. Futura = “F”)

Classe II � 4 kV Line/Neutral - Line/PE - Neutral/PE

In class II equipment, the metallic housing of the device isconsidered as terminal PE.

In class II equipment, the metallic housing of the device isconsidered as terminal PE.

The protection is considered only if the connection of the earthterminal on the pole SPD runs near the appliance. In case it isconnected the ground terminal of the SPD, the protectionUHPDLQ��N9�

It is necessary equipotential bonding of the cable duct with theearth wire of the discharger installed in the power supply.

Classe II+T



*S= Product code series (Es. Guida = “G”)

TUNNEL LIGHTING

Classe I



*S= Product code series (Es. Urano = “U”)

Classe II � 4 kV Line/Neutral - Line/PE - Neutral/PE

5HVRXUFHV�ȧ�1RUPV


NORMS

1. STREET LIGHTING1.1 Standard references

The Italian regulatory system has recently had a radical transfor-mation due to the publication of the new European Standards on lighting .Moreover, in recent years many regions have issued laws against light pollution , which content is more or less restrictive , but tend to be similar . In general, these laws want to limit the dispersion of light flow upward , due to the lighting fixtures installed in areas external . Many standards, recommendations and laws, are available today, in particular :��deR_URcUd�TYRcRTeVcZdeZTd�`W�eYV�46?��eYV�6fcàVR_�cVXf]Re`cj�authority ; ��Z_eVc_ReZ`_R]�cVT`^^V_UReZ`_d�dfTY�Rd�eYV�4:6��cVT`^^V_UR-tions of Comité Internationale de l' Eclairage ), often based on national regulations or those of CEN .Here below the main Rules and Legislative Requirements:

Provisions concerning the production of materials, equipment , Machinery , installations and electrical and electronic installa-tions .UNI 12665:2011 - Terms and fundamental criteria for lighting requirements.UNI EN 1332-1:2005 - Measurement and presentation of photometric data of lamps and luminaires (Part 1: Measurement and file format).

DECREE OF THE MINISTRY OF INFRASTRUCTURE AND TRANSPORT November 5, 2001 , n.6792- Functional and geometric guidelines for the construction of roadsUNI EN 11248:2012 - Street lighting - Selection of lighting categories.UNI EN 13201-2:2004 - Street Lighting ( Part 2: Performance requirements ) .UNI EN 13201-3:2004 – Street Lighting ( Part 3: Calculation of performance).UNI EN 13201-4:200t4 - Street Lighting ( Part 4 : Methods of measurement of photometric performance ).UNI EN 10819:1999 - Outdoor lighting installations .Requirements for the limitation of the dispersions upward of luminous flux .

In addition to compliance with laws and regulations , design can be subject to other requiremets: ��UNEL and UNI Standards with respect to the materials already unified , systems and their components , the project crieria, execution and testing modality, etc. . �� Any other prescription , regulation, recommendation and direction from any other entities (Culture, Fine Arts, the Super-visory Authorities, Municipal Technical Office), issued and applicable to installations covered by this report.

1.2 - Regional rules against lighting pollution

When a man enters light during the night in the external environ-ment, outside of the space that is necessary to illuminate, and so alters the amount of natural light present in this space, produces a form of pollution called light pollution: a pollution of the natural light product by artificial light.

Rules to limit light pollution in an effective manner:1) The first indispensable criteria for effective limitation of light pollution is to not overlighting. This means to limit the luminance and illuminance level of the illuminated surfaces to what is actual-ly necessary. It also means not to apply more than the minimum levels required by the rules of safety, when present, in order to ensure safety without producing excessive light pollution. When there are no specific rules, luminance levels should be commensurate with those of the surrounding areas (in the best laws and the best regulations, the limit of one candle per square meter).

2) Foreseen the possibility of decreasing of the luminance and illuminance levels in those hours in which the characteristics of area use is permited. The lighting levels necessary for safety or for the proper use of a certain type of area, indeed depend on the type of use of the surface. If at certain hours changes the use of a surface, lighting can be reduced (exp. When the trucks unloading of goods is terminated in an industrial area or decreases the road traffic ). If then, after a certain time the light is no longer used, it would avoid unnecessary light pollution and energy waste by turning off the system.

3) Minimize the direct dispersion of light by the lighting equipment outside the areas to be illuminated. In an effective law against light pollution is fundamental and indispensable the obligation to use fully shielded luminaires in all plants , public and private (ie.having an emission of 0 cd / klm at 90 degrees and beyond compared to the vertical downward ) . In fact, even when the luminous flux emitted upward by luminaires seems negligible compared to that reflected from surface , in reality it is the funda-mental part of the flow pollutant at a certain distance from the source . The effects of light pollution depend on the direction of emission. Lighting equipment and surfaces distribute their light differently in different directions. Usually just the lighting fixtures are the ones producing more emissions in the most polluting directions, whose where light pollution spreads in a wider area and adds more effectively to emissions of other plants. Therefore to reduce the effect of lighting entries in the atmosphere is essential to minimize, as much as possible the upward release of the equip-ment. This is actually achievable through a careful design and careful selection of lighting fixtures based on their characteristics and performance.

1.3 - Determination of road typeAccording to the current legislation, a road classification is made for the purposes of determining the applicable lighting category . This classification applies to fixed lighting systems designed to provide users of the road , for vehicles and pedestrians, good visibility conditions during periods of darkness , with the intent to guarantee an adequate level of safety .

Here below are reported the descriptions of the various lighting categories:

Reference Lighting category : this category is derived directly from laws and industry standards , the classification is not normally responsibility of the designer, but the same can help in identifying the correct classification ;

Design lighting category : depends on the application of parameters of influence and specifies the lighting requirements to be considered in the plant design.

Operating lighting categories:in relation to the analysis of the parameters of influence ( risk analysis) and reducing energy consumption , are those categories that take into account the change during the time of the parameters of influence, such as in road environment, and the modification of the traffic flow during the day.

Here below are reported the prospect 1 of the road lighting standard UNI EN 11248:2012

Road Type

Extra urban highways

FcSR_�YZXYhRjd

Service road to Extra urban highways

Service roads urban highways

Main extra urban roads

Service road to main extra urban roads

Extra urban highways service roads (type c1 and type c2)

Secondary extra urban road

Secondary extra urban road with specific limit

FcSR_�ViecR�UZdecZTe�c`RU

FcSR_�UZdecZTe�c`RU

DecRUV�]`TR]Z�ViecRfcSR_V��eZaZ�7"�V�7#�

Local extra urban road

Local urban road : old city center, environmental zone , zone 30

Local urban road: other situations

Local urban road: pedestrian areas

Local urban road: old city centers (main users: pedestrians, admitted by pedestrians)

International local road

=`TR]�ViecR�fcSR_�c`RU��ejaV�7"�R_U�7#�

FcSR_�ViacVddhRj

Cycle and pedestrian itineraries

Road with particular destination

A1

B

C

D

E

7

7SZd

A2

Road Type description

130 - 150ME1

ME2

ME2

ME3b

ME3b

ME3b

ME3b

S2

S2

CE3

CE4/S2

CE4/S2

ME2

ME2

ME2

ME2

ME2

ME3b

130

70-90

50

110

70-90

70-90

50

70-90

70

50

50

50

70-90

50

30

50

30

30

5

5

50

30

/

30

Speed limit[Km h]

EntranceLighting Categoryand risks analysis





2. TUNNEL LIGHTING

1.4 - Risk Analysis

The risk analysis is the evaluation of the influence of parameters in order to identify the lighting category that ensures the maximum effectiveness of the lighting fitting contribution, to the safety of road users in night conditions, and minimizing, at the same time, energy consumption, installation costs and environmental impact management . In relation to a detailed preliminary study of the risk, it is detected the lighting project category (concerning a traffic flow maximum of 100%), and subsequently , considering an effective traffic flow, it is indivi-duated lighting category of exercise. A parameter that can change the lighting category and the color of light: with color rendering index greater than or equal to 60 you can reduce the lighting while with color index less than 30, you must increase the lighting category.

1.5 - Lighting of roundabouts and intersections

The roundabout intersections and access roads ( access and exit arms ) to the lighted roundabouts , due to their geometric and functional characteristics, can be illuminated by applying the categories of lighting series CE , supplemented by the require-ments of debilitating dazzling. The selected lighting category should be grater of one level, than the largest ones referred to RTTVdd� c`RU� �� 7`c� ViRâ]V�� ZW� eYV� RTTVdd� c`RUd� YRgV�^RiZ^f^�class ME3 , the intersection should be applied in the lighting TReVX`cj�46#� �� 7`c� RTTVdd� c`RUd�� RTTVdd� R_U� ViZe� Rc^d� �� e`� eYV�roundabouts not illuminated , however, it is recommended to take the lighting category CE1 . If one or more of the access roads are not illuminated , the reference is provided for the lighting class for these roads . It should adopt a descending lighting in the transition zone between the dark zone and the illuminated one . The length of this zone, on every access road not illuminated, it should not be less than distance traveled in 5 seconds at the maximum speed expected by the intersection distance.

2.1 - Principles to be adopted for the lighting of tunnels

The principles that should be adopted in dealing with the problem of illumination of a tunnel can be summarized as follows: ��EYV�]ZXYeZ_X�djdeV^�^fde�XfRcR_eVV�e`�eYV�UcZgVc�X`Ù�gZdZSZ]Zej�both day and night; �� eYV� UcZgVc� Z_� eYV� Raac`RTY� `W� eYV� ef__V]� ^fde� aVcTVZgV� eYV�change in driving conditions without developing a sense of uncertainty, or still worse , of fear, ��eYV�djdeV^�^fde�XfRcR_eVV�R_�RSdV_TV�`W�dYRU`hd��UZcVTe� �`c�reflected glare, and a good level of vertical illumination to enable the presence of obstacles.

The parameters that must be taken into consideration for the project development of the tunnel lighting are the following:

��ecRWWZT�g`]f^V,��eYV�^RiZ^f^�R]]`hVU�daVVU,��EYV�]f^Z_R_TV�gR]fV�`fedZUV�`W�eYV��dTV_V��Z_�hYZTY�Zd�Z_dVceVU�the portal of entry;��eYV�T]RddZWZTReZ`_�R_U�eYV�ejaV�`W�eYV�ef__V],��EYV�UZfc_R]�R_U�_ZXYe�]f^Z_R_TV�gR]fV�Z_dZUV�eYV�ef__V]��maximum speed expected by the intersection distance.

In order to adapt the vision from the external value of the luminance, in daylight, to the internal value, and to ensure that this passage takes place smoothly, you must divide the length of the gallery in different areas where the value of the ratio of luminance between two neighboring zones decreases appro-priately.

The zones are :Access zone: section of road just before the entrance to the tunnel. Its length is equal to the stopping distance . In this area, the driver of the vehicle must be able to recognize possible obstacles present inside the itinerary. Entry zone: this is the section of road immediately sub-sequent the entrance to the tunnel . Its length must at least respect the stopping distance . The lighting of this section , with respect to the external light , must ensure the lowest possible overhang and allow the driver to identify a possible obstacle from the stopping distance .Transition zone: section of road immediately after the entry zone and previous to the inner one . In this area the luminance levels are reduced compared to the values of entry , so to allow the driver of the vehicle to adapt himself slowly to the lowest levels of luminance of the inner zone . Inner Zone: this area extends from the end of the transition zone to the beginning of the exit zone. The levels of luminance must ensure the driver, a drivie in complete safety. Exit Zone : the last part of the tunnel where the driver's visibility is affected by external light.

An "adaptive" Lighting, in some cases, may be necessary.



4. LIGHTINGOF SPORTS AREAS

3. LIGHTING OF LARGEOUTDOOR AREAS

4.1 - Determination of the type of sports activity

The lighting of the sports areas , whether indoors or outdoors, requires today a specific expertise in the lighting design .A first analysis we can say that the sporting environments are very different one from another , from areas dedicated to amateur sports to the one dedicated to agonistic activities . In fact , depending on the type of activity and the degree of competitiveness , are required different illuminance levels (horizontal and vertical ) and uniformity.

The lighting requirements must take into account many details : the type of sport, speed and movements of the players, the size and the speed of the ball, the position of the spectators. As a result , the lighting must presuppose the knowledge of the relevant legislation , the type of sport and the context in which the sport takes place . Not to be forgotten are also the galleries, stands, and sites devoted to the location of the cameras for shoot, if foreseen .

When performing the lighting calculation, in the first place it should be considered what kind of sport is dedicated to the studied area, in order to establish the necessary lighting parameters. Afterword it is necessary to understand where to place the devices in order to establish, through the calculation of lighting, lens and power:

��:_U``cd+�Raa]ZR_TVd��fdfR]]j�hZeY�UZWWfdZ_X�Rdj^^VecZT�àeZTd��are placed regularly on the ceiling or around the game area;

��`feU``c+�UVgZTVd�hZeY�UZWWfdZ_X��àeZT��W`c�XV_VcR]�]ZXYeZ_X�R_U�centering optical to emphasize the more distant areas, are installed on towers of different height according to the width of the game.

The rule establishes three "lighting classes," according to the level of competition and the distance of the spectators from the area where the competition takes place (see table):

��]ZXYeZ_X�4]Rdd�:+�YZXY�]VgV]�T`âVeZeZ`_d�hYZTY�cVbfZcV�XV_VcR]-ly facilities with a large capacity and large visual distance;

��]ZXYeZ_X�4]Rdd�::+�eYV�RgVcRXV�]VgV]�`W�T`âVeZeZ`_d�eYRe�XV_VcR]-ly require facilities with capacity and medium visual distance;

��]ZXYeZ_X�4]Rdd�:::�+�]`h�]VgV]�T`âVeZeZ`_d�eYRe�XV_VcR]]j�U`�_è�require the presence of spectators.

3.1 - Large areas lighting - tower Light

The lighting of large outdoor areas include parking lots, marshal-ling and industrial storage areas, large squares and junctions, service areas, port areas and all the places where you need a proper level of illumination for the safety of persons and activi-ties.

In general the lighting design of these spaces must meet some basic parameters such as:

�� eYV� Z_deR]]ReZ`_� `W� eYV� ]ZXYe� WZiefcVd� dY`f]U� ^R\V� VRdZVc� R_U�safer, the passing and stop places areas and areas with activities of public interest;��eYV�]ZXYe�^fde�SV�UZcVTeVU�VddV_eZR]]j�hYVcV�_VTVddRcj��hZeY`fe�creating glare dispersion or harassing dazzle; �� 2_� `SdeRT]V� hZeYZ_� eYV� RcVR� ^fde� SV� Z]]f^Z_ReVU� Wc`^� R]]�directions; ��acVgV_e�eYV�W`c^ReZ`_�`W�dYRU`hd�k`_V�e``�YVRgj,�� eYV� ]V_d� �� eYV� a`hVcd� R_U� eYV� aVcW`c^R_TV� `W� eYV� UVgZTVd� `W�illumination used must be adapted to ensure greater efficiency of the plant in relation to the levels of illuminance and energy saving ��eYV�T`]`c�cV_UVcZ_X�`W�eYV�]Râd��hYZTY�UVaV_Ud�`_�eYV�RTeZgZej��it must increase with the degree of difficulty of the task within the area.

Competition levelLighting class

International or national

I II III

Regional

Local

Training

Educational or leisure

Classification ofthe visual task

Average of illuminancevalues maintained on horizontal plane EAV

UniformityEmin / Emax

Areas at low risk with only occasional traffic

Areas at medium risk with moderate traffic

Areas at high risk (refineries)

Pedestrian

Vehicular at low speed

Vehicular

Very roughly

Roughly

Normal

Fine

5

20

50

5

20

50

20

50

100

200

0,15

0,25

0,40

0,15

0,40

0,25

0,25

0,40

0,40

Prevention and Safey

Type of traffic

Type of work



5. INTERIOR LIGHTING

Type of competitionLighting class

Outdoor sports (GR)

I II III

<50 <50

CIE 117

<55

Indoor sports (UGR)

The following table provides for some sports activities, the lighting features recommended by the Olympic Committee and published on 10 July 2006.

In the reading of the table it is necessary to consider the following aspects :

��RTeZgZej�]VgV]d�"��#�R_U�$�T`ccVda`_U�e`�eYV�]ZXYeZ_X�T]RddVd�:::��::�and I of EN 12193;

�� Z]]f^Z_R_TV� �� f_]Vdd� èYVchZdV� daVTZWZVU� �� ^VR_d� `_� � eYV�horizontal plane , which coincides with the surface area of activi-ty ( surface of the water for swimming pools ) ;

��W`c�da`ced�WRTZ]ZeZVd�fdVU�W`c�ecRZ_Z_X�R_U�VUfTReZ`_R]�RTeZgZeZVd� �leisure (class III) and occasionally even for competitions at local level (Class II) is recommended a partial switch-on;

��eYV�]Z^Zed�`W�eYV�X]RcV�gR]fVd�W`c�VRTY�T]Rdd�`W�Z]]f^Z_ReZ`_�RcV�recommended for outdoor sports facilities (index GR) . For indoor environments, the UNI EN 12193 refers to the CIE publication 117 , which indicates exclusively the methods of calculation of the UGR index without specifying the maximum levels to guarantee for the different types of sporting activities. Therefore, it is necessary to pay close attention to the selection , installation and orientation of the floodlights, especially taking into account the main directions of observation.

5.1 - Interior lighting with artificial light

UNI EN 12464-1 standards " Lighting of workplaces . Part 1: Indoor work places " defines the criteria for a proper lighting design of indoor workplaces and provides, in order to get a good visual performance , integration between artificial light and natural light. The standard EN 12464-1 meets in the satisfaction of three basic factors , the idea of lighting design in the workplace:

��GZdfR]�T`^W`ce��_R^V]j�RTYZVgZ_X�R�WVV]Z_X�`W�hV]]�SVZ_X�eYRe�contributes to improving the productivity of workers;

��GZdfR]�aVcW`c^R_TV��_R^V]j�eYV�a`ddZSZ]Zej��`W�h`c\Vcd�e`�TRccj�out their task even in difficult conditions and for a long time;

�� DVTfcZej� �� hYZTY� Zd� eYV� XfRcR_eVV� eYRe� eYV� ]ZXYeZ_X� U`Vd� _è�affect the safety of the workers.

The parameters that the rule takes into account to ensure comfort , performance and safety , are the following:

1 . Luminance distribution2 . Illuminance and uniformity 3 . Glare and its limitation 4 . Direction of the light 5 . Chromatic aspects of light 6 . Flicker and stroboscopic effects 7 . Maintenance factor 8 . Energy saving 9 . Integration of daylight 10 . Illumination in the presence of video terminals


5HVRXUFHV�ȧ�*HQHUDO�VDOHV�FRQGLWLRQ

Niteko Srl general sale conditions shall apply to and are integral part of all quotations and offers, all acceptations , acknowledgments and orders confirmation from the buyer and to all the sales contracts by Niteko Srl and for the purchase of goods and services by the buyer , except where Niteko have explicitly agreed otherwise .

All terms and conditions in all the documents issued by the Buyer, either before or after issuance of any document from Niteko Srl , that refer to these Terms and Conditions, are expressly rejected and not accepted and will not be in any way binding on Niteko

Niteko offers are valid only for the period of time indicated in the offer by Niteko and if the period is not specified, it will be valid 30 days from the date of the offer.

PRICES:The prices in any offer , confirmation or contract are expressed in Euro, delivery EX- WORKS ( in accordance with INCOTERMS latest version) considering Niteko head office or other site designated by Niteko , unless otherwise agreed in writing between the Buyer and Niteko and does not include taxes, duties or similar taxes, now or hereafter applicable. Except as otherwise agreed in writing between the Buyer and Niteko , prices are those applicable at the date of the invoice , according to the applicable price list .

NON-STANDARD ITEMS :Items marked " OPTIONAL " are normally not available in the warehouse , delivery dates and prices , unless specified , are to be agreed from time to time depending on the quantity , availability of production and timing of materials recruitment .

PAYMENT:

DELIVERY AND QUANTITIES:The products will be delivered EX-WORKS (INCOTERMS latest version), unless otherwise agreed in writing. Delivery dates communicated or accepted by Niteko are purely approximate and Niteko will not respond, nor will be responsible for the non-fulfilment of its obligations towards the Buyer, for deliveries that will take place on dates prior or subsequent to the communicated date, if reasonable. Niteko agrees to comply with the delivery date communicated or accepted, provided that the Buyer submit all the information about ordering, delivery and reasonable notice.

The acceptance by signature and stamp of the order confirmation document must be received by Niteko no later than 5 days from the date of its delivery, failing which it shall be considered automatically accepted.The photometric data, efficiency and lighting information may be subject to changes and improvements. Leds temperatures color are subject to tolerance.Niteko does not accept claims after 8 days of receipt of the goods .

LIABILITY LIMITATIONS: Niteko will not be liable for any loss of profit, loss of savings, loss of reputation, loss of starting up, any direct or indirect damages, consequential or special damages arising or in connection with the contract or the sale of products or services by Niteko, or from their use, contractual or extracontractual , or arising from any other source, even though it is Niteko advised or is aware of the possibility of such damages.

a) Niteko will issue invoices to the Buyer at the price of the products, at the established delivery time of the products in accordance with the INCOTERMS applicable . Payment will be due at the time goods are ready , unless otherwise agreed in writing between the Buyer and Niteko . All payments will be made on the bank account ( IBAN ) indicated by Niteko . If deliveries are divided, invoices will be issued separately and payments will be made at the due date

b ) Niteko reserves the right to submit to Niteko Credits office, for approval, the request of product deliveries. If , at any time , Buyer's financial condition does not justify the production or delivery of products, within the applicable payment terms , Niteko may ask for the full or partial advance payment or the application of other payment terms ,or may suspend , withdraw or cancel any commitments, delivery or any other service offered by Niteko .c) In the event of non-fulfilment by the Buyer of the payment of any amount due or any other fees and in the case of any non-fulfilments , Niteko has the right to refuse to provide other services and / or delivery of any Products until payments have been made and may suspend , delay or cancel any commitments, delivery or other service.

GENERAL SALES CONDITION


5HVRXUFHV�ȧ�*HQHUDO�VDOHV�FRQGLWLRQ

FORZA MAGGIORE:Niteko, non sarà responsabile per inadempimenti o ritardi nell’esecuzione se derivano da interruzione del processo produttivo dei prodotti, o se derivano da cause di Forza Maggiore. La Forza Maggiore significa e comprende tutte quelle circostanza ed eventi che siano al di fuori del controllo di Niteko, prevedibili o non prevedibili. A seguito dei quali Niteko non possa essere ragionevolmente tenuta a eseguire le proprie obbligazioni, incluse le cause di forza maggiore e/o colpa di fornitori di Niteko.

GARANZIA:Fare riferimento al documento Certificato di Garanzia pubblicato sul seguente link: www.niteko.com

USE OF TRADEMARK:The pictures, designs and images contained on the website, product catalog and price list are for illustrative purposes and demonstration of the products and their applications and installations. The use of the trademark, logos, product names and any image of the products, accessories and installations by third parties for advertising or promotional purposes must be authorized by Niteko.

CONTROLS ON EXPORTS AND IMPORTS:The purchaser is aware that some transactions of Niteko are subject to imports and exports regulations, including European, U.S. and internatio-nal regulations ("Export Regulations") which prohibit the export, directly or indirectly, of some products or technologies to certain countries. Any and all obligations of Niteko relating to export, re-export and transfer of products as well as the activities of technical assistance, training, invest-ment, brokerage and financial assistance must compliance with the Export Regulations that from time to time, will govern the license and delivery of technology and products abroad through competent people in various jurisdictions for the implementation of Export Regulations. If the delivery of products, services and / or documentation is subject to license request by public authorities or otherwise subject to restriction or prohibition, Niteko may legitimately suspend its obligations and rights towards the Purchaser or end user until the license is obtained or due to the absence of restrictions / prohibitions.Niteko may also terminate the order without liability to the purchaser or end user.The buyer guarantees that it will respect all export rules, re-export and transfer which result from the Export Regulation or are shown on the export license (if applicable) for each product supplied to the buyer. The buyer will be responsible to enforce all restrictions on third-party to whose are transferred or re-exported products, services and / or documentation. The buyer will reasonably attend any action necessary to ensure that there are no buyers or end users who violate Export Regulations. The buyer shall indemnify Niteko for direct and indirect damages, losses and costs (including attorneys' fees) or other liability arising from the violation of this Clause, by Buyer or its customers .

LEGGE APPLICABILE E FORO COMPETENTE:Tutte le offerte, conferme e Contratti sono regolate in accordo con le leggi italiane.Tutte le controversie, nessuna esclusa saranno soggette alla esclusiva competenza del foro di Taranto, Italia.La Convenzione internazionale che regola la vendita internazionali di beni mobili non si applica a nessuna offerta, conferma o Contratto.

L’azienda si riserva il diritto di modificare le caratteristiche degli articoli e i relativi prezzi ogni qualvolta lo riterrà opportuno, senza nessun obbligo di preavviso, secondo le proprie esigenze di fabbricazione finalizzate al miglioramento e al perfezionamento dei prodotti.I dati fotometrici, i rendimenti e le informazioni illuminotecniche possono essere soggetti a variazioni e miglioramenti. La selezione della tempe-ratura di colore (CCT) dei LED prevede la tolleranza di settore, secondo la normativa vigente.

The company reserves the right to modify the products characteristics and their prices whenever it is considered worthwhile, without any obliga-tion notice, finalized to the improvement of the products. The photometric data, efficiency and lighting information may be subject to changes and improvements. The Leds Correlated Color Temperature (CCT) is subject to tolerance, according to current legislation.

Ai sensi e per gli effetti dell’art. 1336 e dell’art. 1341 del codice civile italiano, l’Acquirente dichiara di conoscere e accettare espressamente tutto ciò che è riportato nelle clausole sopra descritte.

5HVRXUFHV�ȧ�:DUUDQW\


1 - NITEKO S.R.L. ("Niteko") guarantees that the "NITEKO" branded products ("Products") are free from defects in workmanship and / or on materials, in case of use as intended, for a period of five years from the date of invoice with effect from 01/01/2012.

2 - This warranty ("Warranty") is issued by Niteko in favor of your company ("Customer") on standard products present in our own brochure.

3 - Guarantee will be activated only if the customer makes the on-line registration of site-specific installation of the product and of the details related to the invoice and order throughout the site [www.niteko.com], within the period of 60 days from the date invoice. In case of no activation remains effective the warranty given in Niteko Brochure.

4 - Guarantee works only if:

5 - Guarantee doesn’t work when

6 - If the Product should reveal defects covered by this Warranty Statement, and according to conditions mentioned in paragraphs 4 and 5 above, Niteko will be free to proceed, at its option, to repair and / or replace the Product with a product equal or equivalent, in line with technolo-gical progress achieved compared to original Product.

7 - Warranty doesn’t cover::

a - Products are used in accordance with the relevant specifications regarding the product use and application (technical specifications);b - installation and / or Product mounting are carried out in accordance with the instructions enclosed to the product and made by qualified professional;c - limit values of temperatures and voltages are not exceeded and the product is not exposed to mechanical stress that doesn’t comply with its intended use;d - Product maintenance is carried out according to the instructions enclosed to the product and is carried out by specialized technical professional and any modifications or repairs to the Products is carried out without written permission or not complying with instructions;e - Customer has previously performed all the emergency procedures specified in the instruction manual attached to the Product; f - the faulty product is stored by the customer in the state in which it is (including light sources, electronic equipments, and all electronic or mechanical parts) for as long as necessary to allow Niteko to carry out the necessary checks on defects / faults complained;g - for power components and for the Products with LEDs, the warranty covers the 5 years up to a maximum use of 22.000/hours (correspon-ding to 12 hours of daily operation); within these limits the guarantee is valid for defects exceeding nominal failure rate of 0.5% / 1000 hours of use, unless it is stated otherwise in the technical specifications for the product, its components and its use. The colour shift of LED modules is not included in manufacturer's guarantee. In a new LED module, light flux and performance are subject to a tolerance of +/- 10%. All relevant technical data are defined in the product and application specifications (data sheet, product leaflet, etc.). Due to technical progress and to the change in the luminous flux and light colour of products that is caused by their use, subsequent deliveries of LED modules may have light properties deviating from those of the original products.h -The Customer Present to Niteko the purchase contract or the corresponding invoice or documentation issued as a result of on-line registration;i - the fault, duly specified and tested in its nature or amount, is terminated in writing by the Customer to Niteko under penalty of cancella-tion no later than sixty (60) days of discovery;j - the Customer has duly paid the Product in accordance with the payment terms agreed in the Sale Contract;k - Products supplied have been installed in Europe.

a - Product faults due to unforeseen and unforeseeable events, accident and / or majeure force (including electric shock, lightning), which can’t be ascribed to a defective manufacturing process of the product;b - defects resulting from amplitude impulse noise or duration of more than: - 1000 V between conductor and conductor (L and N); - 2000 V between conductor and earth (PE and L, N and PE); - according to IEC 61000-4-5:2005-11.

a - all expenses coming from reparation (eg those for the assembly and disassembly, transport of the defective Product and of the repaired and new one, product disposal, daily allowances and travel expenses, lifting equipment, scaffolding); All these costs above mentioned shall be paid by the customer;b - parts subject to wear, such as batteries and mechanical parts subject to wear as well as software defects, bugs or viruses.c - Products commercialized by Niteko but produced by other Companies (look at company brand).For these systems the 5-year warranty will be granted after Niteko evaluation of the lighting project and its installation

8 - Outdoor products are made from Niteko through innovative manufacturing processes that ensure an high quality level in terms of resistance to corrosion, abrasion, flaking and color stability. These products are covered by this warranty provided that possible defects compromise their structural/mechanical safety and those are related to defects on product manufacturing process.9 - This warranty does not apply to Light Management Systems.

10 - When properly activated, this Warranty is the sole and exclusive warranty provided by Niteko to the Customer on Product and expressly derogates from any other right, whether express and/or implied, acknowledged by the law to the Customer, who renounces said right in the broadest manner allowed by the law as well as any other warranties given by Niteko.

11 - The Customer shall claim no further rights from Niteko according to the defective product. In particular, the Customer may not claim from Niteko any expenses due to defective/faulty product storage or any other costs and/or compensation. Moreover the Customer shall not request and/or claim any payment extensions, price reductions or the termination of the supply contract.

WARRANTY

+HDG�DQG�PDQXIDFWXULQJ�2IˉFH�Zona P.I.P. - Viale delle Imprese, 3 - 74020 Montemesola (TA) - ITALY

Tel. [+39] 099.567.12.19 - Fax [+39] 099.567.11.12IT 02867530731

EL

EVA CATALOGUE

06 ȧ 2014

Documents

LED Products for street, industrial and large areas lightingniteko.com/wp-content/uploads/2015/02/ELEVA... · Niteko achieved the GOST R certification for Russian market on all LED