LED STREET LIGHT

• 150-watt and 300-watt shoe box, up to

80% energy saving.

• IP65 water-resistance design.

• Type III light distribution design.

• Wide range input design, 100~277 VAC.

• Environmental friendly, no lead, no

mercury.

• Long lifespan, up to 50,000 hours.

• Slip-fitter*, fast & easy installation.

• UL (), DLC Premium. *Optional: Straight Arm Bracket Square/Round, Trunnion Bracket

Product Specification

Item NO. CCT Voltage Wattage Lumen Luminous Efficiency

Beam Angle

ST150-D-PC-MS-5000K

(SB2-150-AW-50K-D30)

5000K 100~277VAC 150W 19500 lm 130 lm/W Type III

ST300-D-PC-MS-5000K

(SB2-300-AW-50K-D30)

5000K 100~277VAC 300W 39000 lm 130 lm/W Type III

Other Technical Data 150W 300W

Input Voltage 100~277 VAC

Input Frequency 50/60 Hz

Input Current (@120VAC) 1.8 A 3.5 A

Wattage 150W ± 2W 300W ± 4W

CRI ≥80 Ra

Beam Angle Type III

Power Factor ≥0.9

Materials Die-casting Aluminum & PC cover

Working Humidity 25~90 %RH

Working Temp. -25°C~+40°C

IP Rating IP65

Anti-power Rating Class II

LED Chip 2835

LED Quantity 256 pcs 256 pcs

Base Hard wiring

Dimming 0-10V Dimming (10% ~ 100%)

Light Distribution

Product Dimensions (in mm/inch)

150W 300W

Dimensions with slip-fitter.

Add-ons (sold separately)

(1) Photocell Sensor

Twist & Lock quick mount Photocell Sensor:

a) Auto switch on when ambient brightness is 10 LUX or less for 15~120 seconds;

b) Auto switch off when ambient brightness is 60 LUX or over for 2~15 seconds.

To disable it, twist and unmount Photocell Sensor, and mount Shorting Cap instead.

(2) Motion Sensor (with remote)

Motion activated switch with remote controller.

Motion Sensor

Load Limit 600W @120VAC / 1200W @277VAC

HF Frequency 5.8GHz (CW)

Dimming 0-10V Dimming (10% ~ 100%)

Time Setting 10 sec. ~ 30 min. (adjustable)

Brightness Control 10 ~ 2000 Lux (adjustable)

Detection Radius/Angle Max 26 ft. / 360°

Mounting Height Max 50 ft.

Working Humidity 25~95 %RH

Working Temp. -25°C~+70°C

IP Rating IP65 outdoor rated

Remote Controller

Mounting Kit

Slip-fitter Kit (included)

Straight Arm for Square pole or round pole

(sold separatly)

Trunnion for Wall (sold separatly)

Wiring

Risk of electric shock! Install and service by licensed electricians only.

(1) Regular / Photocell Sensor:

For non-dimming connect “L (black)”, “N (white)”, and “GND (green)” to 100~277VAC lines

accordingly. Insulate “DC+ (red)”, “DC- (blue)” separately and leave them open.

For dimming, connect “DC+ (red)” to “dim+”, and “DC- (blue)” to “dim-” of 0~10V dimmer.

(2) Motion Sensor:

Connect “L (black)”, “N (white)”, and “GND (green)” to 100~277VAC lines accordingly.