Upload
vantu
View
214
Download
0
Embed Size (px)
Citation preview
Specifications subject to change without notice.
Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
E332160
Sign Components Manual TYPE
TL
Class 2: US/Canada
LED55WPRT5 Series – Programmable LED DriverBuilt-In Step-Dimming Control0-10V Dimmable Constant Current DriverNarrow cross-section fits T5-style ballast channels
Electrical SpecificationsInput Voltage Range: 120-277 Vac Nom. (108-305 V Min/Max)
Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor: ≥ 0.90 @ > 50% load, 120/230Vac; 65% load, 277Vac
Inrush Current: < 30.0 Amps max @ 277 Vac
Input Current (Max): 0.56 Amps @ 120 Vac, 60Hz0.25 Amps @ 277 Vac, 60Hz
Maximum Power: 55W
Line Regulation: ±3%
Load Regulation: ±4%
THD: < 20% @ > 50% load, 120/230Vac; 65% load, 277Vac
Ripple Current: 4% (Max)
Start-up Time: 500mS typical
Output Protection: Over-Voltage, Over-Current, and Short Circuit Protection with Auto Recovery
Environmental SpecificationsMaximum Case Temp. 80°C
Type TL Rating: 90°C/ 68°C
Minimum Starting Temp: -30ºC
Storage Temperature: -40ºC to +85ºC
Humidity: Up to 90% RH
Cooling: Convection
Vibration Frequency: 5 to 55 Hz/2g, 30 minutes
Sound Rating: Class A
Lifetime: 50,000 Hours, 68ºC @ Tc point (see graph for details)
MTBF: 352,000 hours @ Full Load per MIL-217F Notice 2
EMC: FCC 47CFR Part 15 Class A compliant
Rev 8-31-16
• Built-in step-dimming feature eliminates need for separate control (100%/40% output current)• 2-stage power supply design for better performance over wide range of outputs• Simple programming with Rset resistor• Linear dimming curve• NTC option allows for themal protection of LED engine• Flicker free output for comfort and critical applications• Adjustable Output Current: 100-1500mA• UL Dry & Damp Location Rated, Class 2, Type TL• Dim to zero with 0-10V dimming• Metal housing
Constant Current - Product SpecificationsModel Number Output Current
(mA ±5%)Output Voltage
(Vdc)Max Output Power (W)
Type TL Rating
Typical Efficiency
LED55WPR1T5-055-C1500-D5 100-1500 12-55 55 90/68°C 88%
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Pg 2 of 5
SSL Solutions Faster Than The Speed Of Light®
40 45
Case Hotspot Temperature (°C)
Life
time
(kH
rs)
Lifetime / Case Temperature
0
80
120
100
20
40
60
140
50 55 60 65 70 75 80
Dimensions - Inches (mm)
LED55WPRT5 Series
INPUT Green (GND)Black (L2)Black (L1)White (N)
Case must be grounded in end-use application
OUPUT Red (LED+)Blue (LED-)Purple (DIM+)Gray (DIM+)Gray (NTC)Gray (RSET)Gray (COM-)
Ø 0.16 [4]
1.1 [28]14.17 [360]
1.02 [
26]
1.18 [
30]
0.31 [
8]
0.571 [14.5]
Tc Point
6.28 [159.5]
60%Load
PF
Power Factor / Load
70% 90%80% 100% 60%Load
THD
THD / Load
70% 90%80% 100%0.700
0.750
0.850
0.800
0.900
0.950
1.000
0%
5%
10%
15%
30%
25%
20%
120V/60Hz
230V/50Hz
277V/60Hz
120V/60Hz
230V/50Hz
277V/60Hz
120V/60Hz
230V/50Hz
277V/60Hz
Typical Efficiency / Load
65%
60%
70%
75%
80%
85%
90%
100%
95%
Load
Effic
ienc
y
70%60% 80% 90% 100%
Wire Gauge:AWG 22-180.6-1.0 mm
PUSH IN CONNECTORS
0.35 [9.0]
2
InsulationStrip Length
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Pg 3 of 5
SSL Solutions Faster Than The Speed Of Light®
GRAY -
PURPLE +
LED ENGINE
RSETRESISTOR
0-10VDIMMER
or CONTROL
NTC
(Green)
LED +
LED -
DIM +
DIM -
NTC
RSET
COM
(Red)
(Blue)
(Purple)
(Gray)
(Gray)
(Gray)
(Gray)
(Black)
(Black)
(White)
GROUNDGROUNDSwitch-SW2
Line voltage wall switches
Switch-SW1LINE
NEUTRAL
LINE 2
LINE 1
NEUTRAL
SW1 SW2 lout PinOpen Open 0% 0% (OFF)
Open Closed 40% <50%
Closed Open 40% <50%
Closed Closed 100% 100%
LED55WPRT5 Series
Wiring
Parameters Minimum Typical MaximumSource Current out of 0-10V Purple Wire 0 mA —- 1.5 mAAbsolute Voltage Range on 0-10V (+) Purple Wire -2.0 V —- +15 V
Typical Dimming Circuit: 2-Wire Resistance
DIM+ Purple Wire
Gray WireCOM
Typical Dimming Circuit: 2-Wire 0-10V Analog
DIM+Purple Wire
0-10V Sink
Gray WireCOM
VLeviton IP710Wall Dimmer(Example)
Driver Driver
0-10VDC Dimming
0-10V Dimming Notes:1. Part comes with two dimming input connectors +Purple/-Gray on the output side.2. Part is compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal.3. Outputcurrentwillbe0%whenVdim≤0.60V. This is dim to zero operation.4. Output will be 100% with Purple/Gray open zand 0% with Purple/Gray Shorted.5. Dimming leads are isolated from input leads. Dimming leads are not isolated from output leads. Always shut off power at circuit breaker when working on electrical connections.
Labeling Programmable Drivers: It is highly recommended that the drivers be labeled with information traceable to the programming profile. It can include the programmed output current, dimming curve type, minimum dimming level and name of the file storing the profile. This information is critical to answering any field questions from the contractor or end user.
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10VPurple-to-Gray Voltage (Vdc)
Output Current / 0-10VDC Dimming Control VoltageIout Min set to 0%
0102030405060708090
100
Out
put C
urre
nt %
120Vac
230Vac
277Vac
Step Dimming LogicStep Dimming Notes: 1. Bi-level output is controlled with standard wall switches.
2. Programmable output current must be set to a minimum of ≥700mAforstep-dimmingtofunction.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Pg 4 of 5
SSL Solutions Faster Than The Speed Of Light®
Reading Resistor Codes
�gures �gures �gures multipliers tolerance
100K1%resistor
Black
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
White
Silver
Gold
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
10%
5%
1%
2%
.5%
.25%
.10%
.05%
0.01
0.1
1
10
100
1K
10K
100K
1M
10M
10
15
20
25
30
35
40
45
50
55
60
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Vou
t (Vd
c)
Iout (mA)
OPERATING WINDOWVout (Vdc) vs. Output Current (mA)
Minimum POC when using Step Dimming
Minimum POC (No Step Dimming)
LED55WPRT5 Series
POC (Programmable Output Current)
Rset(Ω) Iout (mA)
100 100
162 130
230 160
270 180
320 200
395 230
442 250
569 300
698 350
845 400
996 450
1150 500
1490 600
1870 700
2300 800
2800 900
3320 1000
3660 1050
5230 1250
5700 1300
6220 1350
6800 1400
7460 1450
8200 1500
9000 1500
0
200
400
600
800
1000
1200
1400
1600
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
9000
Iout
(mA)
Rset (Ohms)
Output Current (mA) vs. Rset (Ohms)
Power Operating Window
Safety Certification Standard
UL/CUL UL8750, UL1310 for UL Class 2 & CAN/CSA C22.2 No. 250.13, UL Type TL 90/68°C
CE EN61347-1, EN61347-2-13
EMC Standard NotesFCC, 47CFR Part 15 Class A
EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
EN 61000-3-2 Part3-2:LimitsforharmoniccurrentemissionsClassC,≥80%RatedPower
EN 61000-3-3 Part3-3:Limitationofvoltagechanges,voltagefluctuationsandflicker.
EN 61000-4-5 Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-FG & N-FG
Energy Star
Energy Star transient protection: Ballast or driver shall comply with ANSI/IEEE C62.41.1-2002 and ANSI/IEEE C62.41.2-2002, Category A operation. The line transient shall consist of seven strikes of a 100 kHz ring wave, 2.5 kV level, for both common mode and differential mode.
Rset Table(nominal output currents)
Rset Resistor Rating: ≥ 1/4W, ± 1% tolerance, ≥ 20V rating
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Pg 5 of 5
SSL Solutions Faster Than The Speed Of Light®
0%
20%
40%
60%
80%
100%
120%
1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500
Iout
(%)
NTC (Ohms)
Output Current (%) vs. NTC (Ohms)
0%
20%
40%
60%
80%
100%
120%
25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
Iout
(%)
NTC Temp (OC)
Output Current (%) vs. NTCS0805E3153GMT NTC Temp (OC)
Note: Disconnect power to LED driver for at least 30 seconds before connecting or disconnecting Driver output and LED Engine. This prevents potential arcing transients that can damage the Engine and Driver. See Hot Plugging in our Driver Application Guide for more information.
Module Temperature Protection using External NTC
LED55WPRT5 Series
Module Temperature Protection using External NTC (Negative Temperature Coefficient)NTCSelectaNegativeThermalCoefficient(NTC)resistorwitharesistancerangethatallowsthefulloutputcurrenttoflowatsafe LED operating temperatures. NTCresistanceshoulddropsufficientlytoallowreducedoutputcurrentatelevatedorharmfulLEDtemperaturelevels. NTC operation should be thoroughly tested to ensure proper operation over all the full temperature range of the Driver and the LED Engine.
Module Temperature Protection ExampleNTC = 805SMD, R25C = 15K Ohm ± 2%, R64C = 3700, Vishay Part #: NTCS0805E3153GMT Default Settings: NTC Max = 3.0K, NTC MIN = 2.0K, Iout Min = 10%
Factory settings:NTC Minimum Ohms = 2.0KNTC Minimum Level (%) ~ 0% Iout,NTC Maximum Ohms = 3.2K, 100% Iout