LEDskin™ 200 00 00 USA Technical Leaflet

re!nventing exhibit building systems

19.53” (496mm)

19.5

3”

(496m

m)

2.44” (62mm)

a 3.1mm pixel pitch provides superior visual presentations

integrated SEG channel

add velcro to backside and cover with hard infill or use integrated SEG channels for fabric

four LED light modules per panel adds operational versatility

LEDskin™

re!nventing exhibit building systems

LED tile system LEDskin™ is an innovative, indoor LED tile system that is custom made to integrate seamlessly into the existing b62® Frame System. LEDskin™ brings endless creative opportunities and guarantees a fast and Tooless® install.

magnetic alignment

quick lock system

901 2048 0100 MKIITOOLESS® M8 CONNECTOR

LEDskin™ Installation The LEDskin™ panels can be combined very easily with b62®frames by using M8 connectors.

Built-in magnets automatically align the LEDskin™ panels for quick and easy installation. This alignment system, combined with built in quick-locks, gaurantee that all LED panels are installed properly and remain securely in place.

cover profiles [608 or 609 ++++ D00 ANO]

cover clips [901 00 030] for aluminum “snap-on” holecoversapply SEG fabric/hard panel

infills to enclose panel backs

LEDskin™

re!nventing exhibit building systems

Creative Solutions All beMatrix® aluminum "snap-on" hole covers can be used on the LEDskin™ walls to create a clean, finished look on LEDskin™ panel edges.

Just like the b62® Frame System, the LEDskin™ frames allow for built-in wire management behind the fabric or hard panel infill.

LEDskin™ Easy Maintenance If one module in an LEDskin™ panel needs to be replaced, use the Gekko [200 20 02]. The Gekko is a special tool developed by beMatrix® to easily remove and replace one magnetic LED module. This essential magnetic tool allows for easy front surface maintenance.

LEDSKIN™ LED MODULE (248x248)

LEDSKIN™ FRAMELEDSKIN™ POWER DATA UNIT (PDU)

NovastarMCTL 600

110v110v HDMI/DVI

signal cable (RJ45/Neutrik)

power cable (Powercom)

DAISY CHAIN

LEDskin™ Panel Specifications

LEDSKIN™ INFORMATION

Pixel pitch 3.1mm

Module quantity 4 pcs

LEDskin™ module resolution 80 x 80 pixels

LEDskin™ module dimension 248 x 248mm

LEDskin™ panel resolution 160 x 160 pixels

LEDskin™ panel dimension 496 x 496 x 62mm

Pixel density 104,058 pixels/m²

Panel weight 16.09 lbs. (7.3kg)

MECHANICAL AND OPTICAL RATINGS

Surface flatness Gap ≤ 0,5mm

Brightness 1,200 nits

View angle 110°/110°

View distance ≥3,1m

Brightness adjustment 0~100% 256 levels

POWER SUPPLY

Operation power 100-240V AC 50-60Hz

Max. power consumption 600w/m²

Average power consumption 200w/m²

Platform Novastar

Operating life 100,000 hours

8x LEDskin™ panels 8x signal cable short 8x power cable short 2x signal cable long 2x power cable long 1x power cable main set and socket (EU/UK/USA)

200 00 008x LEDSKIN™ PANEL (496x496MM)

200 20 01LEDSKIN™ FLIGHTCASE 8x LEDSKIN™ PANELS + CABLE COMPARTMENT

200 10 012x LEDSKIN™ INTERLINK POWER CABLE (0,8M)

200 10 008x LEDSKIN™ INTERLINK POWER CABLE (0,28M)

200 11 012x LEDSKIN™ INTERLINK SIGNAL CABLE (0,8M)

200 11 008x LEDSKIN™ INTERLINK SIGNAL CABLE (0,28M)

LEDskin™

re!nventing exhibit building systems

Flightcase

beMatrix® USA

4385 International BlvdNorcross, GA 30093T. +1 770 225 0552F. +1 770 872 4700 E. info@bematrix.us

www.beMatrix.us US and International Patents Pending beMatrix® and b62® are registered trademarks of beMatrix® USA

re!nventing exhibit building systems

Copy

right

© 0

8/20

17 b

eMat

rix_U

S LE

Dski

n_Te

ch_U

SA07

3117